blob: 675ec52bcf9f2ad4575179987ba01bf1b94dca46 [file] [log] [blame]
/*
* (C) Copyright 2009-2014
* Gerald Kerma <dreagle@doukki.net>
* Marvell Semiconductor <www.marvell.com>
* Written-by: Siddarth Gore <gores@marvell.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _CONFIG_GURUPLUG_H
#define _CONFIG_GURUPLUG_H
/*
* Version number information
*/
#define CONFIG_IDENT_STRING "\nMarvell-GuruPlug"
/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
#define CONFIG_KW88F6281 1 /* SOC Name */
#define CONFIG_MACH_GURUPLUG /* Machine type */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/*
* Compression configuration
*/
#define CONFIG_BZIP2
#define CONFIG_LZMA
#define CONFIG_LZO
/*
* Enable device tree support
*/
#define CONFIG_OF_LIBFDT
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
/*
* Commands configuration
*/
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
#define CONFIG_CMD_IDE
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_PING
#define CONFIG_CMD_USB
#define CONFIG_CMD_FAT
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
*/
#include "mv-common.h"
/*
* Environment variables configurations
*/
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_IS_IN_NAND 1
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
#else
#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
#endif
/*
* max 4k env size is enough, but in case of nand
* it has to be rounded to sector size
*/
#define CONFIG_ENV_SIZE 0x20000 /* 128k */
#define CONFIG_ENV_OFFSET 0xE0000 /* env starts here */
/*
* Default environment variables
*/
#define CONFIG_BOOTCOMMAND \
"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
"ubi part root; " \
"ubifsmount ubi:rootfs; " \
"ubifsload 0x800000 ${kernel}; " \
"ubifsload 0x700000 ${fdt}; " \
"ubifsumount; " \
"fdt addr 0x700000; fdt resize; fdt chosen; " \
"bootz 0x800000 - 0x700000"
#define CONFIG_MTDPARTS \
"mtdparts=orion_nand:" \
"896K(uboot),128K(uboot_env)," \
"-@1M(root)\0"
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=console=ttyS0,115200\0" \
"mtdids=nand0=orion_nand\0" \
"mtdparts="CONFIG_MTDPARTS \
"kernel=/boot/zImage\0" \
"fdt=/boot/guruplug-server-plus.dtb\0" \
"bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"
#define MTDIDS_DEFAULT "nand0=orion_nand"
#define MTDPARTS_DEFAULT \
"mtdparts="CONFIG_MTDPARTS
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
#define CONFIG_PHY_BASE_ADR 0
#endif /* CONFIG_CMD_NET */
/*
* SATA Driver configuration
*/
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#endif /*CONFIG_MVSATA_IDE*/
/*
* File system
*/
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_CMD_MTDPARTS
#define CONFIG_SYS_ALT_MEMTEST
#endif /* _CONFIG_GURUPLUG_H */