blob: f066fe44e771c60dffae927563ac5cd9521af68f [file] [log] [blame]
/*
* Board specific setup info
*
* (C) Copyright 2005-2007
* Samsung Electronics,
* Kyungmin Park <kyungmin.park@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/arch/omap2420.h>
#include <asm/arch/mem.h>
#include <asm/arch/clocks.h>
#include "mem.h"
#define APOLLON_CS0_BASE 0x00000000
#ifdef PRCM_CONFIG_I
#define SDRC_ACTIM_CTRLA_0_VAL 0x7BA35907
#define SDRC_ACTIM_CTRLB_0_VAL 0x00000013
#define SDRC_RFR_CTRL_0_VAL 0x00044C01
#elif defined(PRCM_CONFIG_II)
#define SDRC_ACTIM_CTRLA_0_VAL 0x4A59B485
#define SDRC_ACTIM_CTRLB_0_VAL 0x0000000C
#define SDRC_RFR_CTRL_0_VAL 0x00030001
#endif
#define SDRAM_BASE_ADDRESS 0x80008000
_TEXT_BASE:
.word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
.globl lowlevel_init
lowlevel_init:
#ifdef CONFIG_SYS_NOR_BOOT
/* Check running in SDRAM */
mov r0, pc, lsr #28
cmp r0, #8
beq prcm_setup
flash_setup:
/* In Flash */
ldr r0, =WD2_BASE
ldr r1, =WD_UNLOCK1
str r1, [r0, #WSPR]
ldr r1, =WD_UNLOCK2
str r1, [r0, #WSPR]
/* Pin muxing for SDRC */
mov r1, #0x00
ldr r0, =0x480000A1 /* ball C12, mode 0 */
strb r1, [r0]
ldr r0, =0x48000032 /* ball D11, mode 0 */
strb r1, [r0]
ldr r0, =0x480000A3 /* ball B13, mode 0 */
strb r1, [r0]
/* SDRC setting */
ldr r0, =OMAP2420_SDRC_BASE
ldr r1, =0x00000010
str r1, [r0, #0x10]
ldr r1, =0x00000100
str r1, [r0, #0x44]
/* SDRC CS0 configuration */
ldr r1, =0x00d04011
str r1, [r0, #0x80]
ldr r1, =SDRC_ACTIM_CTRLA_0_VAL
str r1, [r0, #0x9C]
ldr r1, =SDRC_ACTIM_CTRLB_0_VAL
str r1, [r0, #0xA0]
ldr r1, =SDRC_RFR_CTRL_0_VAL
str r1, [r0, #0xA4]
ldr r1, =0x00000041
str r1, [r0, #0x70]
/* Manual command sequence */
ldr r1, =0x00000007
str r1, [r0, #0xA8]
ldr r1, =0x00000000
str r1, [r0, #0xA8]
ldr r1, =0x00000001
str r1, [r0, #0xA8]
ldr r1, =0x00000002
str r1, [r0, #0xA8]
str r1, [r0, #0xA8]
/*
* CS0 SDRC Mode register
* Burst length = 4 - DDR memory
* Serial mode
* CAS latency = 3
*/
ldr r1, =0x00000032
str r1, [r0, #0x84]
/* Note: You MUST set EMR values */
/* EMR1 & EMR2 */
ldr r1, =0x00000000
str r1, [r0, #0x88]
str r1, [r0, #0x8C]
#ifdef OLD_SDRC_DLLA_CTRL
/* SDRC_DLLA_CTRL */
ldr r1, =0x00007306
str r1, [r0, #0x60]
ldr r1, =0x00007303
str r1, [r0, #0x60]
#else
/* SDRC_DLLA_CTRL */
ldr r1, =0x00000506
str r1, [r0, #0x60]
ldr r1, =0x00000503
str r1, [r0, #0x60]
#endif
#ifdef __BROKEN_FEATURE__
/* SDRC_DLLB_CTRL */
ldr r1, =0x00000506
str r1, [r0, #0x68]
ldr r1, =0x00000503
str r1, [r0, #0x68]
#endif
/* little delay after init */
mov r2, #0x1800
1:
subs r2, r2, #0x1
bne 1b
/* Setup base address */
ldr r0, =0x00000000 /* NOR address */
ldr r1, =SDRAM_BASE_ADDRESS /* SDRAM address */
ldr r2, =0x20000 /* Size: 128KB */
copy_loop:
ldmia r0!, {r3-r10}
stmia r1!, {r3-r10}
cmp r0, r2
ble copy_loop
ldr r1, =SDRAM_BASE_ADDRESS
mov lr, pc
mov pc, r1
#endif
prcm_setup:
ldr r0, =OMAP2420_CM_BASE
ldr r1, [r0, #0x544] /* CLKSEL2_PLL */
bic r1, r1, #0x03
orr r1, r1, #0x02
str r1, [r0, #0x544]
ldr r1, [r0, #0x500]
bic r1, r1, #0x03
orr r1, r1, #0x01
str r1, [r0, #0x500]
ldr r1, [r0, #0x140]
bic r1, r1, #0x1f
orr r1, r1, #0x02
str r1, [r0, #0x140]
#ifdef PRCM_CONFIG_I
ldr r1, =0x000003C3
#else
ldr r1, =0x00000343
#endif
str r1, [r0, #0x840]
ldr r1, =0x00000002
str r1, [r0, #0x340]
ldr r1, =CM_CLKSEL1_CORE
#ifdef PRCM_CONFIG_I
ldr r2, =0x08300C44
#else
ldr r2, =0x04600C26
#endif
str r2, [r1]
ldr r0, =OMAP2420_CM_BASE
ldr r1, [r0, #0x084]
and r1, r1, #0x01
cmp r1, #0x01
bne clkvalid
b .
clkvalid:
mov r1, #0x01
str r1, [r0, #0x080]
waitvalid:
ldr r1, [r0, #0x084]
and r1, r1, #0x01
cmp r1, #0x00
bne waitvalid
ldr r0, =CM_CLKSEL1_PLL
#ifdef PRCM_CONFIG_I
ldr r1, =0x01837100
#else
ldr r1, =0x01832100
#endif
str r1, [r0]
ldr r0, =PRCM_CLKCFG_CTRL
mov r1, #0x01
str r1, [r0]
mov r6, #0x50
loop1:
subs r6, r6, #0x01
cmp r6, #0x01
bne loop1
ldr r0, =CM_CLKEN_PLL
mov r1, #0x0f
str r1, [r0]
mov r6, #0x100
loop2:
subs r6, r6, #0x01
cmp r6, #0x01
bne loop2
ldr r0, =0x48008200
ldr r1, =0xbfffffff
str r1, [r0]
ldr r0, =0x48008210
ldr r1, =0xfffffff9
str r1, [r0]
ldr r0, =0x4806a004
ldr r1, =0x00
strb r1, [r0]
ldr r0, =0x4806a020
ldr r1, =0x07
strb r1, [r0]
ldr r0, =0x4806a00c
ldr r1, =0x83
strb r1, [r0]
ldr r0, =0x4806a000
ldr r1, =0x1a
strb r1, [r0]
ldr r0, =0x4806a004
ldr r1, =0x00
strb r1, [r0]
ldr r0, =0x4806a00c
ldr r1, =0x03
strb r1, [r0]
ldr r0, =0x4806a010
ldr r1, =0x03
strb r1, [r0]
ldr r0, =0x4806a008
ldr r1, =0x04
strb r1, [r0]
ldr r0, =0x4806a020
ldr r1, =0x00
strb r1, [r0]
#if 0
ldr r0, =0x4806a000
mov r1, #'u'
strb r1, [r0]
#endif
#if 0
/* LED0 OFF */
ldr r3, =0x480000E5
mov r4, #0x0b
strb r4, [r3]
#endif
ldr sp, SRAM_STACK
str ip, [sp] /* stash old link register */
mov ip, lr /* save link reg across call */
bl s_init /* go setup pll,mux,memory */
ldr ip, [sp] /* restore save ip */
mov lr, ip /* restore link reg */
/* map interrupt controller */
ldr r0, VAL_INTH_SETUP
mcr p15, 0, r0, c15, c2, 4
/* back to arch calling code */
mov pc, lr
/* the literal pools origin */
.ltorg
VAL_INTH_SETUP:
.word PERIFERAL_PORT_BASE
SRAM_STACK:
.word LOW_LEVEL_SRAM_STACK