| /* |
| * armboot - Startup Code for XScale |
| * |
| * Copyright (C) 1998 Dan Malek <dmalek@jlc.net> |
| * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> |
| * Copyright (C) 2000 Wolfgang Denk <wd@denx.de> |
| * Copyright (C) 2001 Alex Zuepke <azu@sysgo.de> |
| * Copyright (C) 2002 Kyle Harris <kharris@nexus-tech.net> |
| * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> |
| * Copyright (C) 2003 Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de> |
| * Copyright (c) 2010 Marek Vasut <marek.vasut@gmail.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <asm-offsets.h> |
| #include <config.h> |
| #include <version.h> |
| #include <asm/arch/pxa-regs.h> |
| #include <asm/arch/macro.h> |
| |
| /* takes care the CP15 update has taken place */ |
| .macro CPWAIT reg |
| mrc p15,0,\reg,c2,c0,0 |
| mov \reg,\reg |
| sub pc,pc,#4 |
| .endm |
| |
| .globl _start |
| _start: b reset |
| #ifdef CONFIG_PRELOADER |
| ldr pc, _hang |
| ldr pc, _hang |
| ldr pc, _hang |
| ldr pc, _hang |
| ldr pc, _hang |
| ldr pc, _hang |
| ldr pc, _hang |
| |
| _hang: |
| .word do_hang |
| .word 0x12345678 |
| .word 0x12345678 |
| .word 0x12345678 |
| .word 0x12345678 |
| .word 0x12345678 |
| .word 0x12345678 |
| .word 0x12345678 /* now 16*4=64 */ |
| #else |
| ldr pc, _undefined_instruction |
| ldr pc, _software_interrupt |
| ldr pc, _prefetch_abort |
| ldr pc, _data_abort |
| ldr pc, _not_used |
| ldr pc, _irq |
| ldr pc, _fiq |
| |
| _undefined_instruction: .word undefined_instruction |
| _software_interrupt: .word software_interrupt |
| _prefetch_abort: .word prefetch_abort |
| _data_abort: .word data_abort |
| _not_used: .word not_used |
| _irq: .word irq |
| _fiq: .word fiq |
| #endif /* CONFIG_PRELOADER */ |
| |
| .balignl 16,0xdeadbeef |
| |
| |
| /* |
| * Startup Code (reset vector) |
| * |
| * do important init only if we don't start from RAM! |
| * - relocate armboot to RAM |
| * - setup stack |
| * - jump to second stage |
| */ |
| |
| .globl _TEXT_BASE |
| _TEXT_BASE: |
| .word CONFIG_SYS_TEXT_BASE |
| |
| /* |
| * These are defined in the board-specific linker script. |
| */ |
| .globl _bss_start_ofs |
| _bss_start_ofs: |
| .word __bss_start - _start |
| |
| .globl _bss_end_ofs |
| _bss_end_ofs: |
| .word _end - _start |
| |
| #ifdef CONFIG_USE_IRQ |
| /* IRQ stack memory (calculated at run-time) */ |
| .globl IRQ_STACK_START |
| IRQ_STACK_START: |
| .word 0x0badc0de |
| |
| /* IRQ stack memory (calculated at run-time) */ |
| .globl FIQ_STACK_START |
| FIQ_STACK_START: |
| .word 0x0badc0de |
| #endif /* CONFIG_USE_IRQ */ |
| |
| #ifndef CONFIG_PRELOADER |
| /* IRQ stack memory (calculated at run-time) + 8 bytes */ |
| .globl IRQ_STACK_START_IN |
| IRQ_STACK_START_IN: |
| .word 0x0badc0de |
| |
| /* |
| * the actual reset code |
| */ |
| |
| reset: |
| /* |
| * set the cpu to SVC32 mode |
| */ |
| mrs r0,cpsr |
| bic r0,r0,#0x1f |
| orr r0,r0,#0xd3 |
| msr cpsr,r0 |
| |
| /* |
| * Enable MMU to use DCache as DRAM |
| */ |
| /* Domain access -- enable for all CPs */ |
| ldr r0, =0x0000ffff |
| mcr p15, 0, r0, c3, c0, 0 |
| |
| /* Point TTBR to MMU table */ |
| ldr r0, =mmu_table |
| adr r2, _start |
| orr r0, r2 |
| mcr p15, 0, r0, c2, c0, 0 |
| |
| /* !!! Hereby, check if the code is running from SRAM !!! */ |
| /* If the code is running from SRAM, alias SRAM to 0x0 to simulate NOR. The code |
| * is linked to 0x0 too, so this makes things easier. */ |
| cmp r2, #0x5c000000 |
| |
| ldreq r1, [r0] |
| orreq r1, r2 |
| streq r1, [r0] |
| |
| /* Kick in MMU, ICache, DCache, BTB */ |
| mrc p15, 0, r0, c1, c0, 0 |
| bic r0, #0x1b00 |
| bic r0, #0x0087 |
| orr r0, #0x1800 |
| orr r0, #0x0005 |
| mcr p15, 0, r0, c1, c0, 0 |
| CPWAIT r0 |
| |
| /* Unlock Icache, Dcache */ |
| mcr p15, 0, r0, c9, c1, 1 |
| mcr p15, 0, r0, c9, c2, 1 |
| |
| /* Flush Icache, Dcache, BTB */ |
| mcr p15, 0, r0, c7, c7, 0 |
| |
| /* Unlock I-TLB, D-TLB */ |
| mcr p15, 0, r0, c10, c4, 1 |
| mcr p15, 0, r0, c10, c8, 1 |
| |
| /* Flush TLB */ |
| mcr p15, 0, r0, c8, c7, 0 |
| /* Allocate 4096 bytes of Dcache as RAM */ |
| |
| /* Drain pending loads and stores */ |
| mcr p15, 0, r0, c7, c10, 4 |
| |
| mov r4, #0x00 |
| mov r5, #0x00 |
| mov r2, #0x01 |
| mcr p15, 0, r0, c9, c2, 0 |
| CPWAIT r0 |
| |
| /* 128 lines reserved (128 x 32bytes = 4096 bytes total) */ |
| mov r0, #128 |
| mov r1, #0xa0000000 |
| alloc: |
| mcr p15, 0, r1, c7, c2, 5 |
| /* Drain pending loads and stores */ |
| mcr p15, 0, r0, c7, c10, 4 |
| strd r4, [r1], #8 |
| strd r4, [r1], #8 |
| strd r4, [r1], #8 |
| strd r4, [r1], #8 |
| subs r0, #0x01 |
| bne alloc |
| /* Drain pending loads and stores */ |
| mcr p15, 0, r0, c7, c10, 4 |
| mov r2, #0x00 |
| mcr p15, 0, r2, c9, c2, 0 |
| CPWAIT r0 |
| |
| /* Jump to 0x0 ( + offset) if running from SRAM */ |
| adr r0, zerojmp |
| bic r0, #0x5c000000 |
| mov pc, r0 |
| zerojmp: |
| |
| /* Set stackpointer in internal RAM to call board_init_f */ |
| call_board_init_f: |
| ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) |
| ldr r0,=0x00000000 |
| bl board_init_f |
| |
| /*------------------------------------------------------------------------------*/ |
| |
| /* |
| * void relocate_code (addr_sp, gd, addr_moni) |
| * |
| * This "function" does not return, instead it continues in RAM |
| * after relocating the monitor code. |
| * |
| */ |
| .globl relocate_code |
| relocate_code: |
| mov r4, r0 /* save addr_sp */ |
| mov r5, r1 /* save addr of gd */ |
| mov r6, r2 /* save addr of destination */ |
| mov r7, r2 /* save addr of destination */ |
| |
| /* Set up the stack */ |
| stack_setup: |
| mov sp, r4 |
| |
| adr r0, _start |
| ldr r2, _TEXT_BASE |
| ldr r3, _bss_start_ofs |
| add r2, r0, r3 /* r2 <- source end address */ |
| cmp r0, r6 |
| beq clear_bss |
| |
| #ifndef CONFIG_SKIP_RELOCATE_UBOOT |
| stmfd sp!, {r0-r12} |
| copy_loop: |
| ldmia r0!, {r3-r5, r7-r11} /* copy from source address [r0] */ |
| stmia r6!, {r3-r5, r7-r11} /* copy to target address [r1] */ |
| cmp r0, r2 /* until source end address [r2] */ |
| blo copy_loop |
| ldmfd sp!, {r0-r12} |
| |
| #ifndef CONFIG_PRELOADER |
| /* |
| * fix .rel.dyn relocations |
| */ |
| ldr r0, _TEXT_BASE /* r0 <- Text base */ |
| sub r9, r7, r0 /* r9 <- relocation offset */ |
| ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ |
| add r10, r10, r0 /* r10 <- sym table in FLASH */ |
| ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ |
| add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ |
| ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ |
| add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ |
| fixloop: |
| ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ |
| add r0, r9 /* r0 <- location to fix up in RAM */ |
| ldr r1, [r2, #4] |
| and r8, r1, #0xff |
| cmp r8, #23 /* relative fixup? */ |
| beq fixrel |
| cmp r8, #2 /* absolute fixup? */ |
| beq fixabs |
| /* ignore unknown type of fixup */ |
| b fixnext |
| fixabs: |
| /* absolute fix: set location to (offset) symbol value */ |
| mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ |
| add r1, r10, r1 /* r1 <- address of symbol in table */ |
| ldr r1, [r1, #4] /* r1 <- symbol value */ |
| add r1, r9 /* r1 <- relocated sym addr */ |
| b fixnext |
| fixrel: |
| /* relative fix: increase location by offset */ |
| ldr r1, [r0] |
| add r1, r1, r9 |
| fixnext: |
| str r1, [r0] |
| add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ |
| cmp r2, r3 |
| blo fixloop |
| #endif |
| #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ |
| |
| clear_bss: |
| #ifndef CONFIG_PRELOADER |
| ldr r0, _bss_start_ofs |
| ldr r1, _bss_end_ofs |
| ldr r3, _TEXT_BASE /* Text base */ |
| mov r4, r7 /* reloc addr */ |
| add r0, r0, r4 |
| add r1, r1, r4 |
| mov r2, #0x00000000 /* clear */ |
| |
| clbss_l:str r2, [r0] /* clear loop... */ |
| add r0, r0, #4 |
| cmp r0, r1 |
| bne clbss_l |
| #endif |
| |
| /* |
| * We are done. Do not return, instead branch to second part of board |
| * initialization, now running from RAM. |
| */ |
| #ifdef CONFIG_ONENAND_IPL |
| ldr r0, _start_oneboot_ofs |
| mov pc, r0 |
| |
| _start_oneboot_ofs |
| : .word start_oneboot |
| #else |
| ldr r0, _board_init_r_ofs |
| adr r1, _start |
| add r0, r0, r1 |
| add lr, r0, r9 |
| /* setup parameters for board_init_r */ |
| mov r0, r5 /* gd_t */ |
| mov r1, r7 /* dest_addr */ |
| /* jump to it ... */ |
| mov pc, lr |
| |
| _board_init_r_ofs: |
| .word board_init_r - _start |
| #endif |
| |
| _rel_dyn_start_ofs: |
| .word __rel_dyn_start - _start |
| _rel_dyn_end_ofs: |
| .word __rel_dyn_end - _start |
| _dynsym_start_ofs: |
| .word __dynsym_start - _start |
| |
| #else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ |
| |
| /****************************************************************************/ |
| /* */ |
| /* the actual reset code for OneNAND IPL */ |
| /* */ |
| /****************************************************************************/ |
| |
| #ifndef CONFIG_PXA27X |
| #error OneNAND IPL is not supported on PXA25x and 26x due to lack of SRAM |
| #endif |
| |
| reset: |
| /* Set CPU to SVC32 mode */ |
| mrs r0,cpsr |
| bic r0,r0,#0x1f |
| orr r0,r0,#0x13 |
| msr cpsr,r0 |
| |
| /* Point stack at the end of SRAM and leave 32 words for abort-stack */ |
| ldr sp, =0x5c03ff80 |
| |
| /* Start OneNAND IPL */ |
| ldr pc, =start_oneboot |
| |
| #endif /* #if !defined(CONFIG_ONENAND_IPL) */ |
| |
| #ifndef CONFIG_PRELOADER |
| /****************************************************************************/ |
| /* */ |
| /* Interrupt handling */ |
| /* */ |
| /****************************************************************************/ |
| |
| /* IRQ stack frame */ |
| |
| #define S_FRAME_SIZE 72 |
| |
| #define S_OLD_R0 68 |
| #define S_PSR 64 |
| #define S_PC 60 |
| #define S_LR 56 |
| #define S_SP 52 |
| |
| #define S_IP 48 |
| #define S_FP 44 |
| #define S_R10 40 |
| #define S_R9 36 |
| #define S_R8 32 |
| #define S_R7 28 |
| #define S_R6 24 |
| #define S_R5 20 |
| #define S_R4 16 |
| #define S_R3 12 |
| #define S_R2 8 |
| #define S_R1 4 |
| #define S_R0 0 |
| |
| #define MODE_SVC 0x13 |
| |
| /* use bad_save_user_regs for abort/prefetch/undef/swi ... */ |
| |
| .macro bad_save_user_regs |
| sub sp, sp, #S_FRAME_SIZE |
| stmia sp, {r0 - r12} /* Calling r0-r12 */ |
| add r8, sp, #S_PC |
| |
| #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) |
| ldr r2, _armboot_start |
| sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) |
| sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack |
| #else |
| ldr r2, IRQ_STACK_START_IN |
| #endif |
| ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */ |
| add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */ |
| |
| add r5, sp, #S_SP |
| mov r1, lr |
| stmia r5, {r0 - r4} /* save sp_SVC, lr_SVC, pc, cpsr, old_r */ |
| mov r0, sp |
| .endm |
| |
| |
| /* use irq_save_user_regs / irq_restore_user_regs for */ |
| /* IRQ/FIQ handling */ |
| |
| .macro irq_save_user_regs |
| sub sp, sp, #S_FRAME_SIZE |
| stmia sp, {r0 - r12} /* Calling r0-r12 */ |
| add r8, sp, #S_PC |
| stmdb r8, {sp, lr}^ /* Calling SP, LR */ |
| str lr, [r8, #0] /* Save calling PC */ |
| mrs r6, spsr |
| str r6, [r8, #4] /* Save CPSR */ |
| str r0, [r8, #8] /* Save OLD_R0 */ |
| mov r0, sp |
| .endm |
| |
| .macro irq_restore_user_regs |
| ldmia sp, {r0 - lr}^ @ Calling r0 - lr |
| mov r0, r0 |
| ldr lr, [sp, #S_PC] @ Get PC |
| add sp, sp, #S_FRAME_SIZE |
| subs pc, lr, #4 @ return & move spsr_svc into cpsr |
| .endm |
| |
| .macro get_bad_stack |
| #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) |
| ldr r13, _armboot_start @ setup our mode stack |
| sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) |
| sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack |
| #else |
| ldr r13, IRQ_STACK_START_IN @ setup our mode stack |
| #endif |
| |
| str lr, [r13] @ save caller lr / spsr |
| mrs lr, spsr |
| str lr, [r13, #4] |
| |
| mov r13, #MODE_SVC @ prepare SVC-Mode |
| msr spsr_c, r13 |
| mov lr, pc |
| movs pc, lr |
| .endm |
| |
| .macro get_irq_stack @ setup IRQ stack |
| ldr sp, IRQ_STACK_START |
| .endm |
| |
| .macro get_fiq_stack @ setup FIQ stack |
| ldr sp, FIQ_STACK_START |
| .endm |
| #endif /* CONFIG_PRELOADER */ |
| |
| |
| /****************************************************************************/ |
| /* */ |
| /* exception handlers */ |
| /* */ |
| /****************************************************************************/ |
| |
| #ifdef CONFIG_PRELOADER |
| .align 5 |
| do_hang: |
| ldr sp, _TEXT_BASE /* use 32 words abort stack */ |
| bl hang /* hang and never return */ |
| #else /* !CONFIG_PRELOADER */ |
| .align 5 |
| undefined_instruction: |
| get_bad_stack |
| bad_save_user_regs |
| bl do_undefined_instruction |
| |
| .align 5 |
| software_interrupt: |
| get_bad_stack |
| bad_save_user_regs |
| bl do_software_interrupt |
| |
| .align 5 |
| prefetch_abort: |
| get_bad_stack |
| bad_save_user_regs |
| bl do_prefetch_abort |
| |
| .align 5 |
| data_abort: |
| get_bad_stack |
| bad_save_user_regs |
| bl do_data_abort |
| |
| .align 5 |
| not_used: |
| get_bad_stack |
| bad_save_user_regs |
| bl do_not_used |
| |
| #ifdef CONFIG_USE_IRQ |
| |
| .align 5 |
| irq: |
| get_irq_stack |
| irq_save_user_regs |
| bl do_irq |
| irq_restore_user_regs |
| |
| .align 5 |
| fiq: |
| get_fiq_stack |
| irq_save_user_regs /* someone ought to write a more */ |
| bl do_fiq /* effiction fiq_save_user_regs */ |
| irq_restore_user_regs |
| |
| #else /* !CONFIG_USE_IRQ */ |
| |
| .align 5 |
| irq: |
| get_bad_stack |
| bad_save_user_regs |
| bl do_irq |
| |
| .align 5 |
| fiq: |
| get_bad_stack |
| bad_save_user_regs |
| bl do_fiq |
| #endif /* CONFIG_PRELOADER */ |
| #endif /* CONFIG_USE_IRQ */ |
| |
| /****************************************************************************/ |
| /* */ |
| /* Reset function: the PXA250 doesn't have a reset function, so we have to */ |
| /* perform a watchdog timeout for a soft reset. */ |
| /* */ |
| /****************************************************************************/ |
| /* Operating System Timer */ |
| .align 5 |
| .globl reset_cpu |
| |
| /* FIXME: this code is PXA250 specific. How is this handled on */ |
| /* other XScale processors? */ |
| |
| reset_cpu: |
| |
| /* We set OWE:WME (watchdog enable) and wait until timeout happens */ |
| |
| ldr r0, =OWER |
| ldr r1, [r0] |
| orr r1, r1, #0x0001 /* bit0: WME */ |
| str r1, [r0] |
| |
| /* OS timer does only wrap every 1165 seconds, so we have to set */ |
| /* the match register as well. */ |
| |
| ldr r0, =OSCR |
| ldr r1, [r0] /* read OS timer */ |
| add r1, r1, #0x800 /* let OSMR3 match after */ |
| add r1, r1, #0x800 /* 4096*(1/3.6864MHz)=1ms */ |
| ldr r0, =OSMR3 |
| str r1, [r0] |
| |
| reset_endless: |
| |
| b reset_endless |
| |
| #ifndef CONFIG_PRELOADER |
| .section .mmudata, "a" |
| .align 14 |
| .globl mmu_table |
| mmu_table: |
| /* 0x00000000 - 0xa0000000 : 1:1, uncached mapping */ |
| .set __base, 0 |
| .rept 0xa00 |
| .word (__base << 20) | 0xc12 |
| .set __base, __base + 1 |
| .endr |
| |
| /* 0xa0000000 - 0xa0100000 : 1:1, cached mapping */ |
| .word (0xa00 << 20) | 0x1c1e |
| |
| .set __base, 0xa01 |
| .rept 0x1000 - 0xa01 |
| .word (__base << 20) | 0xc12 |
| .set __base, __base + 1 |
| .endr |
| #endif |