blob: 41ebd6da2654b0f9e6ba255e9b87ff5c028d9552 [file] [log] [blame]
/*
* (C) Copyright 2011-2012
* Pali Rohár <pali.rohar@gmail.com>
*
* (C) Copyright 2010
* Alistair Buxton <a.j.buxton@gmail.com>
*
* Derived from Beagle Board code:
* (C) Copyright 2006-2008
* Texas Instruments.
* Richard Woodruff <r-woodruff2@ti.com>
* Syed Mohammed Khasim <x0khasim@ti.com>
*
* Configuration settings for the Nokia RX-51 aka N900.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
*/
#define CONFIG_OMAP /* in a TI OMAP core */
#define CONFIG_OMAP3430 /* which is in a 3430 */
#define CONFIG_OMAP3_RX51 /* working with RX51 */
#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */
#define CONFIG_OMAP_COMMON
/* Common ARM Erratas */
#define CONFIG_ARM_ERRATA_454179
#define CONFIG_ARM_ERRATA_430973
#define CONFIG_ARM_ERRATA_621766
#define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51
/*
* Nokia X-Loader loading secondary image to address 0x80400000
* NOLO loading boot image to random place, so it doesn't really
* matter what we set this to. We have to copy u-boot to this address
*/
#define CONFIG_SYS_TEXT_BASE 0x80008000
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
#include <asm/arch/omap.h>
#include <asm/arch/mem.h>
#include <linux/stringify.h>
/*
* Display CPU and Board information
*/
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Clock Defines */
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK >> 1)
#undef CONFIG_USE_IRQ /* no support for IRQs */
#define CONFIG_MISC_INIT_R
#define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */
#define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */
#define CONFIG_INITRD_TAG /* enable passing initrd */
#define CONFIG_REVISION_TAG /* enable passing revision tag*/
#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
/*
* Size of malloc() pool
*/
#define CONFIG_ENV_SIZE (128 << 10)
#define CONFIG_UBI_SIZE (512 << 10)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
(128 << 10))
/*
* Hardware drivers
*/
/*
* NS16550 Configuration
*/
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
/*
* select serial console configuration
*/
#define CONFIG_CONS_INDEX 3
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
#define CONFIG_SERIAL3 3 /* UART3 on RX-51 */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_OMAP_HSMMC
#define CONFIG_DOS_PARTITION
/* USB */
#define CONFIG_USB_MUSB_UDC
#define CONFIG_USB_MUSB_HCD
#define CONFIG_USB_OMAP3
#define CONFIG_TWL4030_USB
/* USB device configuration */
#define CONFIG_USB_DEVICE
#define CONFIG_USBD_VENDORID 0x0421
#define CONFIG_USBD_PRODUCTID 0x01c8
#define CONFIG_USBD_MANUFACTURER "Nokia"
#define CONFIG_USBD_PRODUCT_NAME "N900"
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_NO_FLASH
/* commands to include */
#define CONFIG_CMDLINE_EDITING /* add command line history */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_CMD_BOOTMENU /* ANSI terminal Boot Menu */
#define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */
#ifdef ONENAND_SUPPORT
#define CONFIG_CMD_ONENAND /* ONENAND support */
#define CONFIG_CMD_MTDPARTS /* mtd parts support */
#ifdef UBIFS_SUPPORT
#define CONFIG_CMD_UBIFS /* UBIFS Support */
#endif
#endif
#define CONFIG_OMAP3_SPI
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
*/
#define CONFIG_TWL4030_POWER
#define CONFIG_TWL4030_LED
#define CONFIG_TWL4030_KEYPAD
#define CONFIG_OMAP_GPIO
#define GPIO_SLIDE 71
/*
* Board ONENAND Info.
*/
#define PART1_NAME "bootloader"
#define PART1_SIZE 128
#define PART1_MULL 1024
#define PART1_SUFF "k"
#define PART1_OFFS 0x00000000
#define PART1_MASK 0x00000003
#define PART2_NAME "config"
#define PART2_SIZE 384
#define PART2_MULL 1024
#define PART2_SUFF "k"
#define PART2_OFFS 0x00020000
#define PART2_MASK 0x00000000
#define PART3_NAME "log"
#define PART3_SIZE 256
#define PART3_MULL 1024
#define PART3_SUFF "k"
#define PART3_OFFS 0x00080000
#define PART3_MASK 0x00000000
#define PART4_NAME "kernel"
#define PART4_SIZE 2
#define PART4_MULL 1024*1024
#define PART4_SUFF "m"
#define PART4_OFFS 0x000c0000
#define PART4_MASK 0x00000000
#define PART5_NAME "initfs"
#define PART5_SIZE 2
#define PART5_MULL 1024*1024
#define PART5_SUFF "m"
#define PART5_OFFS 0x002c0000
#define PART5_MASK 0x00000000
#define PART6_NAME "rootfs"
#define PART6_SIZE 257280
#define PART6_MULL 1024
#define PART6_SUFF "k"
#define PART6_OFFS 0x004c0000
#define PART6_MASK 0x00000000
#ifdef ONENAND_SUPPORT
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#ifdef UBIFS_SUPPORT
#define CONFIG_RBTREE
#define CONFIG_LZO
#endif
#define MTDIDS_DEFAULT "onenand0=onenand"
#define MTDPARTS_DEFAULT "mtdparts=onenand:" \
__stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \
__stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \
__stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \
__stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \
__stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \
"-(" PART6_NAME ")"
#endif
/* Watchdog support */
#define CONFIG_HW_WATCHDOG
/*
* Framebuffer
*/
/* Video console */
#define CONFIG_VIDEO
#define CONFIG_CFB_CONSOLE
#define CONFIG_CFB_CONSOLE_ANSI /* Enable ANSI escape codes in framebuffer */
#define CONFIG_VIDEO_LOGO
#define VIDEO_FB_16BPP_PIXEL_SWAP
#define VIDEO_FB_16BPP_WORD_SWAP
#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_SPLASH_SCREEN
/* functions for cfb_console */
#define VIDEO_KBD_INIT_FCT rx51_kp_init()
#define VIDEO_TSTC_FCT rx51_kp_tstc
#define VIDEO_GETC_FCT rx51_kp_getc
#ifndef __ASSEMBLY__
struct stdio_dev;
int rx51_kp_init(void);
int rx51_kp_tstc(struct stdio_dev *sdev);
int rx51_kp_getc(struct stdio_dev *sdev);
#endif
#ifndef MTDPARTS_DEFAULT
#define MTDPARTS_DEFAULT
#endif
/* Environment information */
#define CONFIG_EXTRA_ENV_SETTINGS \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"usbtty=cdc_acm\0" \
"stdin=vga\0" \
"stdout=vga\0" \
"stderr=vga\0" \
"setcon=setenv stdin ${con};" \
"setenv stdout ${con};" \
"setenv stderr ${con}\0" \
"sercon=setenv con serial; run setcon\0" \
"usbcon=setenv con usbtty; run setcon\0" \
"vgacon=setenv con vga; run setcon\0" \
"slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
"switchmmc=mmc dev ${mmcnum}\0" \
"kernaddr=0x82008000\0" \
"initrdaddr=0x84008000\0" \
"scriptaddr=0x86008000\0" \
"fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
"${loadaddr} ${mmcfile}\0" \
"kernload=setenv loadaddr ${kernaddr};" \
"setenv mmcfile ${mmckernfile};" \
"run fileload\0" \
"initrdload=setenv loadaddr ${initrdaddr};" \
"setenv mmcfile ${mmcinitrdfile};" \
"run fileload\0" \
"scriptload=setenv loadaddr ${scriptaddr};" \
"setenv mmcfile ${mmcscriptfile};" \
"run fileload\0" \
"scriptboot=echo Running ${mmcscriptfile} from mmc " \
"${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
"kernboot=echo Booting ${mmckernfile} from mmc " \
"${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
"kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
"${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
"attachboot=echo Booting attached kernel image ...;" \
"setenv setup_omap_atag 1;" \
"bootm ${attkernaddr};" \
"setenv setup_omap_atag\0" \
"trymmcscriptboot=if run switchmmc; then " \
"if run scriptload; then " \
"run scriptboot;" \
"fi;" \
"fi\0" \
"trymmckernboot=if run switchmmc; then " \
"if run kernload; then " \
"run kernboot;" \
"fi;" \
"fi\0" \
"trymmckerninitrdboot=if run switchmmc; then " \
"if run initrdload; then " \
"if run kernload; then " \
"run kerninitrdboot;" \
"fi;" \
"fi; " \
"fi\0" \
"trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
"setenv mmckernfile uImage; run trymmckernboot\0" \
"trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
"setenv mmcpart 2; run trymmcpartboot;" \
"setenv mmcpart 3; run trymmcpartboot;" \
"setenv mmcpart 4; run trymmcpartboot\0" \
"trymmcboot=if run switchmmc; then " \
"setenv mmctype fat;" \
"run trymmcallpartboot;" \
"setenv mmctype ext2;" \
"run trymmcallpartboot;" \
"setenv mmctype ext4;" \
"run trymmcallpartboot;" \
"fi\0" \
"emmcboot=setenv mmcnum 1; run trymmcboot\0" \
"sdboot=setenv mmcnum 0; run trymmcboot\0" \
"menucmd=bootmenu\0" \
"bootmenu_0=Attached kernel=run attachboot\0" \
"bootmenu_1=Internal eMMC=run emmcboot\0" \
"bootmenu_2=External SD card=run sdboot\0" \
"bootmenu_3=U-Boot boot order=boot\0" \
"bootmenu_delay=30\0" \
""
#define CONFIG_PREBOOT \
"setenv mmcnum 1; setenv mmcpart 1;" \
"setenv mmcscriptfile bootmenu.scr;" \
"if run switchmmc; then " \
"setenv mmcdone true;" \
"setenv mmctype fat;" \
"if run scriptload; then true; else " \
"setenv mmctype ext2;" \
"if run scriptload; then true; else " \
"setenv mmctype ext4;" \
"if run scriptload; then true; else " \
"setenv mmcdone false;" \
"fi;" \
"fi;" \
"fi;" \
"if ${mmcdone}; then " \
"run scriptboot;" \
"fi;" \
"fi;" \
"if run slide; then true; else " \
"setenv bootmenu_delay 0;" \
"setenv bootdelay 0;" \
"fi"
#define CONFIG_POSTBOOTMENU \
"echo;" \
"echo Extra commands:;" \
"echo run sercon - Use serial port for control.;" \
"echo run usbcon - Use usbtty for control.;" \
"echo run vgacon - Use framebuffer/keyboard.;" \
"echo run sdboot - Boot from SD card slot.;" \
"echo run emmcboot - Boot internal eMMC memory.;" \
"echo run attachboot - Boot attached kernel image.;" \
"echo"
#define CONFIG_BOOTCOMMAND \
"run sdboot;" \
"run emmcboot;" \
"run attachboot;" \
"echo"
#define CONFIG_MENU
#define CONFIG_MENU_SHOW
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
/* default load address */
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
/*
* OMAP3 has 12 GP timers, they can be driven by the system clock
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
* This rate is divided by a local divisor.
*/
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
/*
* Stack sizes
*
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
/*
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 2
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
/*
* FLASH and environment organization
*/
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
#define CONFIG_SYS_INIT_RAM_SIZE 0x800
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/*
* Attached kernel image
*/
#define SDRAM_SIZE 0x10000000 /* 256 MB */
#define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
#define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */
#define KERNEL_OFFSET 0x40000 /* 256 kB */
#define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET)
#define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE)
/* Reserve protected RAM for attached kernel */
#define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1)
#endif /* __CONFIG_H */