| /* |
| * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net> |
| * Stephan Linz <linz@li-pro.net> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /*********************************************************************** |
| * Include the whole NIOS CPU configuration. |
| * |
| * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!! |
| * |
| ***********************************************************************/ |
| |
| #if defined(CONFIG_NIOS_BASE_32) |
| #include <configs/ADNPESC1_base_32.h> |
| #else |
| #error *** CFG_ERROR: you have to setup right NIOS CPU configuration |
| #endif |
| |
| /*------------------------------------------------------------------------ |
| * BOARD/CPU -- TOP-LEVEL |
| *----------------------------------------------------------------------*/ |
| #define CONFIG_NIOS 1 /* NIOS-32 core */ |
| #define CONFIG_ADNPESC1 1 /* SSV ADNP/ESC1 board */ |
| #define CONFIG_SYS_CLK_FREQ CFG_NIOS_CPU_CLK/* 50 MHz core clock */ |
| #define CFG_HZ 1000 /* 1 msec time tick */ |
| #undef CFG_CLKS_IN_HZ |
| #define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ |
| |
| /*------------------------------------------------------------------------ |
| * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM) |
| *----------------------------------------------------------------------*/ |
| #if (CFG_NIOS_CPU_SDRAM_SIZE != 0) |
| |
| #define CFG_SDRAM_BASE CFG_NIOS_CPU_SDRAM_BASE |
| #define CFG_SDRAM_SIZE CFG_NIOS_CPU_SDRAM_SIZE |
| |
| #else |
| #error *** CFG_ERROR: you have to setup any SDRAM in NIOS CPU config |
| #endif |
| |
| #if defined(CFG_NIOS_CPU_SRAM_BASE) && defined(CFG_NIOS_CPU_SRAM_SIZE) |
| |
| #define CFG_SRAM_BASE CFG_NIOS_CPU_SRAM_BASE |
| #define CFG_SRAM_SIZE CFG_NIOS_CPU_SRAM_SIZE |
| |
| #else |
| |
| #undef CFG_SRAM_BASE |
| #undef CFG_SRAM_SIZE |
| |
| #endif |
| |
| #define CFG_VECT_BASE CFG_NIOS_CPU_VEC_BASE |
| |
| /*------------------------------------------------------------------------ |
| * MEMORY ORGANIZATION - For the most part, you can put things pretty |
| * much anywhere. This is pretty flexible for Nios. So here we make some |
| * arbitrary choices & assume that the monitor is placed at the end of |
| * a memory resource (so you must make sure TEXT_BASE is chosen |
| * appropriately -- this is very important if you plan to move your |
| * memory to another place as configured at this time !!!). |
| * |
| * -The heap is placed below the monitor. |
| * -Global data is placed below the heap. |
| * -The stack is placed below global data (&grows down). |
| *----------------------------------------------------------------------*/ |
| #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */ |
| #define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ |
| #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) |
| |
| #define CFG_MONITOR_BASE TEXT_BASE |
| #define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) |
| #define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) |
| #define CFG_INIT_SP CFG_GBL_DATA_OFFSET |
| |
| /*------------------------------------------------------------------------ |
| * FLASH (AM29LV065D) |
| *----------------------------------------------------------------------*/ |
| #if (CFG_NIOS_CPU_FLASH_SIZE != 0) |
| |
| #define CFG_FLASH_BASE CFG_NIOS_CPU_FLASH_BASE |
| #define CFG_FLASH_SIZE CFG_NIOS_CPU_FLASH_SIZE |
| #define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */ |
| #define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */ |
| #define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ |
| #define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ |
| #define CFG_FLASH_WORD_SIZE unsigned short /* flash word size */ |
| |
| #else |
| #error *** CFG_ERROR: you have to setup any Flash memory in NIOS CPU config |
| #endif |
| |
| /*------------------------------------------------------------------------ |
| * ENVIRONMENT |
| *----------------------------------------------------------------------*/ |
| #if (CFG_NIOS_CPU_FLASH_SIZE != 0) |
| |
| #define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */ |
| |
| /* Mem addr of environment */ |
| #if defined(CONFIG_NIOS_BASE_32) |
| #define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) |
| #else |
| #error *** CFG_ERROR: you have to setup the environment base address CFG_ENV_ADDR |
| #endif |
| |
| #define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ |
| #define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */ |
| |
| #else |
| #define CFG_ENV_IS_NOWHERE 1 /* NO Environment */ |
| #endif |
| |
| /*------------------------------------------------------------------------ |
| * NIOS APPLICATION CODE BASE AREA |
| *----------------------------------------------------------------------*/ |
| #if ((CFG_ENV_ADDR + CFG_ENV_SIZE) == 0x1050000) |
| #define CFG_ADNPESC1_UPDATE_LOAD_ADDR "0x2000100" |
| #define CFG_ADNPESC1_NIOS_APPL_ENTRY "0x1050000" |
| #define CFG_ADNPESC1_NIOS_APPL_IDENT "0x105000c" |
| #define CFG_ADNPESC1_NIOS_APPL_END "0x11fffff" |
| #define CFG_ADNPESC1_FILESYSTEM_BASE "0x1200000" |
| #define CFG_ADNPESC1_FILESYSTEM_END "0x17fffff" |
| #else |
| #error *** CFG_ERROR: missing right appl.code base configuration, expand your config.h |
| #endif |
| #define CFG_ADNPESC1_NIOS_IDENTIFIER "Nios" |
| |
| /*------------------------------------------------------------------------ |
| * BOOT ENVIRONMENT |
| *----------------------------------------------------------------------*/ |
| #ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */ |
| #define CFG_ADNPESC1_SLED_BOOT_OFF "sled boot off; " |
| #define CFG_ADNPESC1_SLED_RED_BLINK "sled red blink; " |
| #else |
| #define CFG_ADNPESC1_SLED_BOOT_OFF |
| #define CFG_ADNPESC1_SLED_RED_BLINK |
| #endif |
| |
| #define CONFIG_BOOTDELAY 5 |
| #define CONFIG_BOOTCOMMAND \ |
| "if itest.s *$appl_ident_addr == \"$appl_ident_str\"; " \ |
| "then " \ |
| "wd off; " \ |
| CFG_ADNPESC1_SLED_BOOT_OFF \ |
| "go $appl_entry_addr; " \ |
| "else " \ |
| CFG_ADNPESC1_SLED_RED_BLINK \ |
| "echo *** missing \"$appl_ident_str\" at $appl_ident_addr; "\ |
| "echo *** invalid application at $appl_entry_addr; " \ |
| "echo *** stop bootup...; " \ |
| "fi" |
| |
| /*------------------------------------------------------------------------ |
| * EXTRA ENVIRONMENT |
| *----------------------------------------------------------------------*/ |
| #ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */ |
| #define CFG_ADNPESC1_SLED_YELLO_ON "sled yellow on; " |
| #define CFG_ADNPESC1_SLED_YELLO_OFF "sled yellow off; " |
| #else |
| #define CFG_ADNPESC1_SLED_YELLO_ON |
| #define CFG_ADNPESC1_SLED_YELLO_OFF |
| #endif |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "update_allowed=0\0" \ |
| "update_load_addr=" CFG_ADNPESC1_UPDATE_LOAD_ADDR "\0" \ |
| "appl_entry_addr=" CFG_ADNPESC1_NIOS_APPL_ENTRY "\0" \ |
| "appl_end_addr=" CFG_ADNPESC1_NIOS_APPL_END "\0" \ |
| "appl_ident_addr=" CFG_ADNPESC1_NIOS_APPL_IDENT "\0" \ |
| "appl_ident_str=" CFG_ADNPESC1_NIOS_IDENTIFIER "\0" \ |
| "appl_name=ADNPESC1/base32/linux.bin\0" \ |
| "appl_update=" \ |
| "if itest.b $update_allowed != 0; " \ |
| "then " \ |
| CFG_ADNPESC1_SLED_YELLO_ON \ |
| "tftp $update_load_addr $appl_name; " \ |
| "protect off $appl_entry_addr $appl_end_addr; " \ |
| "era $appl_entry_addr $appl_end_addr; " \ |
| "cp.b $update_load_addr $appl_entry_addr $filesize; "\ |
| CFG_ADNPESC1_SLED_YELLO_OFF \ |
| "else " \ |
| "echo *** update not allowed (update_allowed=$update_allowed); "\ |
| "fi\0" \ |
| "fs_base_addr=" CFG_ADNPESC1_FILESYSTEM_BASE "\0" \ |
| "fs_end_addr=" CFG_ADNPESC1_FILESYSTEM_END "\0" \ |
| "fs_name=ADNPESC1/base32/romfs.img\0" \ |
| "fs_update=" \ |
| "if itest.b $update_allowed != 0; " \ |
| "then " \ |
| CFG_ADNPESC1_SLED_YELLO_ON \ |
| "tftp $update_load_addr $fs_name; " \ |
| "protect off $fs_base_addr $fs_end_addr; " \ |
| "era $fs_base_addr $fs_end_addr; " \ |
| "cp.b $update_load_addr $fs_base_addr $filesize; "\ |
| CFG_ADNPESC1_SLED_YELLO_OFF \ |
| "else " \ |
| "echo *** update not allowed (update_allowed=$update_allowed); "\ |
| "fi\0" \ |
| "uboot_name=ADNPESC1/base32/u-boot.bin\0" \ |
| "uboot_loadnrun=" \ |
| "if ping $serverip; " \ |
| "then " \ |
| CFG_ADNPESC1_SLED_YELLO_ON \ |
| "tftp $update_load_addr $uboot_name; " \ |
| "wd off; " \ |
| "go $update_load_addr; " \ |
| "else " \ |
| "echo *** missing connection to $serverip; " \ |
| "echo *** check your network and try again...; "\ |
| "fi\0" |
| |
| /*------------------------------------------------------------------------ |
| * CONSOLE |
| *----------------------------------------------------------------------*/ |
| #if (CFG_NIOS_CPU_UART_NUMS != 0) |
| |
| #define CFG_NIOS_CONSOLE CFG_NIOS_CPU_UART0 /* 1st UART is Cons. */ |
| |
| #if (CFG_NIOS_CPU_UART0_BR != 0) |
| #define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ |
| #define CONFIG_BAUDRATE CFG_NIOS_CPU_UART0_BR |
| #else |
| #undef CFG_NIOS_FIXEDBAUD |
| #define CONFIG_BAUDRATE 115200 |
| #endif |
| |
| #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| |
| #else |
| #error *** CFG_ERROR: you have to setup at least one UART in NIOS CPU config |
| #endif |
| |
| /*------------------------------------------------------------------------ |
| * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT, |
| * so an avalon bus timer is required. |
| *----------------------------------------------------------------------*/ |
| #if (CFG_NIOS_CPU_TIMER_NUMS != 0) && defined(CFG_NIOS_CPU_TICK_TIMER) |
| |
| #if (CFG_NIOS_CPU_TICK_TIMER == 0) |
| |
| #define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick */ |
| #define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER0_IRQ |
| |
| #if (CFG_NIOS_CPU_TIMER0_FP == 1) /* fixed period */ |
| |
| #if (CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ) |
| #define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER0_PER / CFG_HZ) |
| #else |
| #error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ |
| #endif |
| |
| #undef CFG_NIOS_TMRCNT /* no preloadable counter value */ |
| |
| #elif (CFG_NIOS_CPU_TIMER0_FP == 0) /* variable period */ |
| |
| #if (CFG_HZ <= 1000) |
| #define CFG_NIOS_TMRMS (1000 / CFG_HZ) |
| #else |
| #error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000 |
| #endif |
| |
| #define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ) |
| |
| #else |
| #error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER0_FP correct |
| #endif |
| |
| #elif (CFG_NIOS_CPU_TICK_TIMER == 1) |
| |
| #define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick */ |
| #define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER1_IRQ |
| |
| #if (CFG_NIOS_CPU_TIMER1_FP == 1) /* fixed period */ |
| |
| #if (CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ) |
| #define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER1_PER / CFG_HZ) |
| #else |
| #error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ |
| #endif |
| |
| #undef CFG_NIOS_TMRCNT /* no preloadable counter value */ |
| |
| #elif (CFG_NIOS_CPU_TIMER1_FP == 0) /* variable period */ |
| |
| #if (CFG_HZ <= 1000) |
| #define CFG_NIOS_TMRMS (1000 / CFG_HZ) |
| #else |
| #error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000 |
| #endif |
| |
| #define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ) |
| |
| #else |
| #error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER1_FP correct |
| #endif |
| |
| #endif /* CFG_NIOS_CPU_TICK_TIMER */ |
| |
| #else |
| #error *** CFG_ERROR: you have to setup at least one TIMER in NIOS CPU config |
| #endif |
| |
| /*------------------------------------------------------------------------ |
| * WATCHDOG (or better MAX823 supervisory circuite access) |
| *----------------------------------------------------------------------*/ |
| #define CONFIG_HW_WATCHDOG 1 /* board specific WD */ |
| |
| #ifdef CONFIG_HW_WATCHDOG |
| |
| /* MAX823 supervisor -- watchdog enable port at: */ |
| #if (CFG_NIOS_CPU_WDENA_PIO == 0) |
| #define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO0 /* PIO0 */ |
| #elif (CFG_NIOS_CPU_WDENA_PIO == 1) |
| #define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO1 /* PIO1 */ |
| #elif (CFG_NIOS_CPU_WDENA_PIO == 2) |
| #define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO2 /* PIO2 */ |
| #elif (CFG_NIOS_CPU_WDENA_PIO == 3) |
| #define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO3 /* PIO3 */ |
| #elif (CFG_NIOS_CPU_WDENA_PIO == 4) |
| #define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO4 /* PIO4 */ |
| #elif (CFG_NIOS_CPU_WDENA_PIO == 5) |
| #define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO5 /* PIO5 */ |
| #elif (CFG_NIOS_CPU_WDENA_PIO == 6) |
| #define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO6 /* PIO6 */ |
| #elif (CFG_NIOS_CPU_WDENA_PIO == 7) |
| #define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO7 /* PIO7 */ |
| #elif (CFG_NIOS_CPU_WDENA_PIO == 8) |
| #define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO8 /* PIO8 */ |
| #elif (CFG_NIOS_CPU_WDENA_PIO == 9) |
| #define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO9 /* PIO9 */ |
| #else |
| #error *** CFG_ERROR: you have to setup at least one WDENA_PIO in NIOS CPU config |
| #endif |
| |
| /* MAX823 supervisor -- watchdog trigger port at: */ |
| #if (CFG_NIOS_CPU_WDTOG_PIO == 0) |
| #define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO0 /* PIO0 */ |
| #elif (CFG_NIOS_CPU_WDTOG_PIO == 1) |
| #define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO1 /* PIO1 */ |
| #elif (CFG_NIOS_CPU_WDTOG_PIO == 2) |
| #define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO2 /* PIO2 */ |
| #elif (CFG_NIOS_CPU_WDTOG_PIO == 3) |
| #define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO3 /* PIO3 */ |
| #elif (CFG_NIOS_CPU_WDTOG_PIO == 4) |
| #define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO4 /* PIO4 */ |
| #elif (CFG_NIOS_CPU_WDTOG_PIO == 5) |
| #define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO5 /* PIO5 */ |
| #elif (CFG_NIOS_CPU_WDTOG_PIO == 6) |
| #define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO6 /* PIO6 */ |
| #elif (CFG_NIOS_CPU_WDTOG_PIO == 7) |
| #define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO7 /* PIO7 */ |
| #elif (CFG_NIOS_CPU_WDTOG_PIO == 8) |
| #define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO8 /* PIO8 */ |
| #elif (CFG_NIOS_CPU_WDTOG_PIO == 9) |
| #define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO9 /* PIO9 */ |
| #else |
| #error *** CFG_ERROR: you have to setup at least one WDTOG_PIO in NIOS CPU config |
| #endif |
| |
| #if defined(CONFIG_NIOS_BASE_32) /* NIOS CPU specifics */ |
| #define CONFIG_HW_WDENA_BIT 0 /* WD enable @ Bit 0 */ |
| #define CONFIG_HW_WDTOG_BIT 0 /* WD trigger @ Bit 0 */ |
| #define CONFIG_HW_WDPORT_WRONLY 1 /* each WD port wr/only*/ |
| #else |
| #error *** CFG_ERROR: missing watchdog bit configuration, expand your config.h |
| #endif |
| |
| #endif /* CONFIG_HW_WATCHDOG */ |
| |
| /*------------------------------------------------------------------------ |
| * SERIAL PERIPHAREL INTERFACE |
| *----------------------------------------------------------------------*/ |
| #if (CFG_NIOS_CPU_SPI_NUMS == 1) |
| |
| #define CONFIG_NIOS_SPI 1 /* SPI support active */ |
| #define CFG_NIOS_SPIBASE CFG_NIOS_CPU_SPI0 |
| #define CFG_NIOS_SPIBITS CFG_NIOS_CPU_SPI0_BITS |
| |
| #define CONFIG_RTC_DS1306 1 /* Dallas 1306 real time clock */ |
| #define CFG_SPI_RTC_DEVID 0 /* as 1st SPI device */ |
| |
| #else |
| #undef CONFIG_NIOS_SPI /* NO SPI support */ |
| #endif |
| |
| /*------------------------------------------------------------------------ |
| * Ethernet -- needs work! |
| *----------------------------------------------------------------------*/ |
| #if (CFG_NIOS_CPU_LAN_NUMS == 1) |
| |
| #if (CFG_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */ |
| |
| #define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ |
| #undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ |
| #define CONFIG_SMC91111_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS) |
| |
| #if (CFG_NIOS_CPU_LAN0_BUSW == 32) |
| #define CONFIG_SMC_USE_32_BIT 1 |
| #else /* no */ |
| #undef CONFIG_SMC_USE_32_BIT |
| #endif |
| |
| #elif (CFG_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */ |
| |
| /********************************************/ |
| /* !!! CS8900 is __not__ tested on NIOS !!! */ |
| /********************************************/ |
| #define CONFIG_DRIVER_CS8900 /* Using CS8900 */ |
| #define CS8900_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS) |
| |
| #if (CFG_NIOS_CPU_LAN0_BUSW == 32) |
| #undef CS8900_BUS16 |
| #define CS8900_BUS32 1 |
| #else /* no */ |
| #define CS8900_BUS16 1 |
| #undef CS8900_BUS32 |
| #endif |
| |
| #else |
| #error *** CFG_ERROR: invalid LAN0 chip type, check your NIOS CPU config |
| #endif |
| |
| #define CONFIG_ETHADDR 02:80:ae:20:60:6f |
| #define CONFIG_NETMASK 255.255.255.248 |
| #define CONFIG_IPADDR 192.168.161.84 |
| #define CONFIG_SERVERIP 192.168.161.85 |
| |
| #else |
| #error *** CFG_ERROR: you have to setup just one LAN only or expand your config.h |
| #endif |
| |
| /*------------------------------------------------------------------------ |
| * STATUS LEDs |
| *----------------------------------------------------------------------*/ |
| #if (CFG_NIOS_CPU_PIO_NUMS != 0) && defined(CFG_NIOS_CPU_LED_PIO) |
| |
| #if (CFG_NIOS_CPU_LED_PIO == 0) |
| |
| #define STATUS_LED_BASE CFG_NIOS_CPU_PIO0 |
| #define STATUS_LED_BITS CFG_NIOS_CPU_PIO0_BITS |
| #define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ |
| |
| #if (CFG_NIOS_CPU_PIO0_TYPE == 1) |
| #define STATUS_LED_WRONLY 1 |
| #else |
| #undef STATUS_LED_WRONLY |
| #endif |
| |
| #elif (CFG_NIOS_CPU_LED_PIO == 1) |
| |
| #define STATUS_LED_BASE CFG_NIOS_CPU_PIO1 |
| #define STATUS_LED_BITS CFG_NIOS_CPU_PIO1_BITS |
| #define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ |
| |
| #if (CFG_NIOS_CPU_PIO1_TYPE == 1) |
| #define STATUS_LED_WRONLY 1 |
| #else |
| #undef STATUS_LED_WRONLY |
| #endif |
| |
| #elif (CFG_NIOS_CPU_LED_PIO == 2) |
| |
| #define STATUS_LED_BASE CFG_NIOS_CPU_PIO2 |
| #define STATUS_LED_BITS CFG_NIOS_CPU_PIO2_BITS |
| #define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ |
| |
| #if (CFG_NIOS_CPU_PIO2_TYPE == 1) |
| #define STATUS_LED_WRONLY 1 |
| #else |
| #undef STATUS_LED_WRONLY |
| #endif |
| |
| #elif (CFG_NIOS_CPU_LED_PIO == 3) |
| |
| #error *** CFG_ERROR: status LEDs at PIO3 not supported, expand your config.h |
| |
| #elif (CFG_NIOS_CPU_LED_PIO == 4) |
| |
| #error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h |
| |
| #elif (CFG_NIOS_CPU_LED_PIO == 5) |
| |
| #error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h |
| |
| #elif (CFG_NIOS_CPU_LED_PIO == 6) |
| |
| #error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h |
| |
| #elif (CFG_NIOS_CPU_LED_PIO == 7) |
| |
| #error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h |
| |
| #elif (CFG_NIOS_CPU_LED_PIO == 8) |
| |
| #error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h |
| |
| #elif (CFG_NIOS_CPU_LED_PIO == 9) |
| |
| #error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h |
| |
| #else |
| #error *** CFG_ERROR: you have to set CFG_NIOS_CPU_LED_PIO in right case |
| #endif |
| |
| #define CONFIG_STATUS_LED 1 /* enable status led driver */ |
| |
| #define STATUS_LED_BIT (1 << 0) /* LED[0] */ |
| #define STATUS_LED_STATE STATUS_LED_BLINKING |
| #define STATUS_LED_BOOT_STATE STATUS_LED_OFF |
| #define STATUS_LED_PERIOD (CFG_HZ / 2) /* ca. 1 Hz */ |
| #define STATUS_LED_BOOT 0 /* boot LED */ |
| |
| #if (STATUS_LED_BITS > 1) |
| #define STATUS_LED_BIT1 (1 << 1) /* LED[1] */ |
| #define STATUS_LED_STATE1 STATUS_LED_OFF |
| #define STATUS_LED_PERIOD1 (CFG_HZ / 10) /* ca. 5 Hz */ |
| #define STATUS_LED_RED 1 /* fail LED */ |
| #endif |
| |
| #if (STATUS_LED_BITS > 2) |
| #define STATUS_LED_BIT2 (1 << 2) /* LED[2] */ |
| #define STATUS_LED_STATE2 STATUS_LED_OFF |
| #define STATUS_LED_PERIOD2 (CFG_HZ / 2) /* ca. 1 Hz */ |
| #define STATUS_LED_YELLOW 2 /* info LED */ |
| #endif |
| |
| #if (STATUS_LED_BITS > 3) |
| #define STATUS_LED_BIT3 (1 << 3) /* LED[3] */ |
| #define STATUS_LED_STATE3 STATUS_LED_OFF |
| #define STATUS_LED_PERIOD3 (CFG_HZ / 2) /* ca. 1 Hz */ |
| #define STATUS_LED_GREEN 3 /* info LED */ |
| #endif |
| |
| #define STATUS_LED_PAR 1 /* makes status_led.h happy */ |
| |
| #endif /* CFG_NIOS_CPU_PIO_NUMS */ |
| |
| /*------------------------------------------------------------------------ |
| * Diagnostics / Power On Self Tests |
| *----------------------------------------------------------------------*/ |
| #define CONFIG_POST CFG_POST_RTC |
| #define CFG_NIOS_POST_WORD_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_all.h> |
| |
| #undef CONFIG_CMD_ASKENV |
| #undef CONFIG_CMD_BEDBUG |
| #undef CONFIG_CMD_BMP |
| #undef CONFIG_CMD_CACHE |
| #undef CONFIG_CMD_DOC |
| #undef CONFIG_CMD_DTT |
| #undef CONFIG_CMD_EEPROM |
| #undef CONFIG_CMD_ELF |
| #undef CONFIG_CMD_FAT |
| #undef CONFIG_CMD_FDC |
| #undef CONFIG_CMD_FDOS |
| #undef CONFIG_CMD_HWFLOW |
| #undef CONFIG_CMD_IDE |
| #undef CONFIG_CMD_I2C |
| #undef CONFIG_CMD_JFFS2 |
| #undef CONFIG_CMD_KGDB |
| #undef CONFIG_CMD_NAND |
| #undef CONFIG_CMD_NFS |
| #undef CONFIG_CMD_MMC |
| #undef CONFIG_CMD_MII |
| #undef CONFIG_CMD_PCI |
| #undef CONFIG_CMD_PCMCIA |
| #undef CONFIG_CMD_SCSI |
| #undef CONFIG_CMD_VFD |
| #undef CONFIG_CMD_USB |
| #undef CONFIG_CMD_XIMG |
| |
| #if (CFG_NIOS_CPU_SPI_NUMS != 1) |
| #undef CONFIG_CMD_SPI |
| #undef CONFIG_CMD_DATE |
| #endif |
| |
| |
| /*------------------------------------------------------------------------ |
| * KGDB |
| *----------------------------------------------------------------------*/ |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_KGDB_BAUDRATE 9600 |
| #endif |
| |
| /*------------------------------------------------------------------------ |
| * MISC |
| *----------------------------------------------------------------------*/ |
| #define CFG_LONGHELP /* undef to save memory */ |
| #define CFG_HUSH_PARSER 1 /* use "hush" command parser |
| undef to save memory */ |
| #define CFG_PROMPT "ADNPESC1 > " /* Monitor Command Prompt */ |
| #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ |
| #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ |
| #define CFG_MAXARGS 64 /* max number of command args*/ |
| #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ |
| |
| #ifdef CFG_HUSH_PARSER |
| #define CFG_PROMPT_HUSH_PS2 "[]> " |
| #endif |
| |
| /* Default load address */ |
| #if (CFG_SRAM_SIZE != 0) |
| |
| /* default in SRAM */ |
| #define CFG_LOAD_ADDR CFG_SRAM_BASE |
| |
| #elif (CFG_SDRAM_SIZE != 0) |
| |
| /* default in SDRAM */ |
| #if (CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE) |
| #if 1 |
| #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE) |
| #else |
| #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x400000) |
| #endif |
| #else |
| #define CFG_LOAD_ADDR CFG_SDRAM_BASE |
| #endif |
| |
| #else |
| #undef CFG_LOAD_ADDR /* force error break */ |
| #endif |
| |
| |
| /* MEM test area */ |
| #if (CFG_SDRAM_SIZE != 0) |
| |
| /* SDRAM begin to stack area (1MB stack) */ |
| #if (CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE) |
| #if 0 |
| #define CFG_MEMTEST_START (CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE) |
| #else |
| #define CFG_MEMTEST_START (CFG_SDRAM_BASE + 0x400000) |
| #endif |
| #else |
| #define CFG_MEMTEST_START CFG_SDRAM_BASE |
| #endif |
| |
| #define CFG_MEMTEST_END (CFG_INIT_SP - (1024 * 1024)) |
| #define CFG_MEMTEST_END (CFG_INIT_SP - (1024 * 1024)) |
| |
| #else |
| #undef CFG_MEMTEST_START /* force error break */ |
| #undef CFG_MEMTEST_END |
| #endif |
| |
| /* |
| * JFFS2 partitions |
| * |
| */ |
| /* No command line, one static partition */ |
| #undef CONFIG_JFFS2_CMDLINE |
| #define CONFIG_JFFS2_DEV "nor" |
| #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF |
| #define CONFIG_JFFS2_PART_OFFSET 0x00000000 |
| |
| /* mtdparts command line support */ |
| /* |
| #define CONFIG_JFFS2_CMDLINE |
| #define MTDIDS_DEFAULT "" |
| #define MTDPARTS_DEFAULT "" |
| */ |
| |
| #endif /* __CONFIG_H */ |