mpc512x: use common code for CSx configuration
Remove CSx configurations from board code and only define
required CSx macros in the board config file to configure
chip select windows and parameters.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Cc: Wolfgang Denk <wd@denx.de>
diff --git a/board/davedenx/aria/aria.c b/board/davedenx/aria/aria.c
index 31b079b..04912b8 100644
--- a/board/davedenx/aria/aria.c
+++ b/board/davedenx/aria/aria.c
@@ -55,37 +55,6 @@
int board_early_init_f(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- u32 spridr;
-
- /*
- * Initialize Local Window for the On Board FPGA access
- */
- out_be32(&im->sysconf.lpcs2aw,
- CSAW_START(CONFIG_SYS_ARIA_FPGA_BASE) |
- CSAW_STOP(CONFIG_SYS_ARIA_FPGA_BASE, CONFIG_SYS_ARIA_FPGA_SIZE)
- );
- out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG);
- sync_law(&im->sysconf.lpcs2aw);
-
- /*
- * Initialize Local Window for the On Board SRAM access
- */
- out_be32(&im->sysconf.lpcs6aw,
- CSAW_START(CONFIG_SYS_ARIA_SRAM_BASE) |
- CSAW_STOP(CONFIG_SYS_ARIA_SRAM_BASE, CONFIG_SYS_ARIA_SRAM_SIZE)
- );
- out_be32(&im->lpc.cs_cfg[6], CONFIG_SYS_CS6_CFG);
- sync_law(&im->sysconf.lpcs6aw);
-
- /*
- * Configure Flash Speed
- */
- out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG);
-
- spridr = in_be32(&im->sysconf.spridr);
-
- if (SVR_MJREV(spridr) >= 2)
- out_be32(&im->lpc.altr, CONFIG_SYS_CS_ALETIMING);
/*
* Enable clocks
diff --git a/board/esd/mecp5123/mecp5123.c b/board/esd/mecp5123/mecp5123.c
index 748ad7c..19e6e1f 100644
--- a/board/esd/mecp5123/mecp5123.c
+++ b/board/esd/mecp5123/mecp5123.c
@@ -65,18 +65,9 @@
int board_early_init_f(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- u32 spridr;
int i;
/*
- * Initialize Local Window for NOR FLASH access
- */
- out_be32(&im->sysconf.lpcs0aw,
- CSAW_START(CONFIG_SYS_FLASH_BASE) |
- CSAW_STOP(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE));
- sync_law(&im->sysconf.lpcs0aw);
-
- /*
* Initialize Local Window for boot access
*/
out_be32(&im->sysconf.lpbaw,
@@ -84,28 +75,6 @@
sync_law(&im->sysconf.lpbaw);
/*
- * Initialize Local Window for VPC3 access
- */
- out_be32(&im->sysconf.lpcs1aw,
- CSAW_START(CONFIG_SYS_VPC3_BASE) |
- CSAW_STOP(CONFIG_SYS_VPC3_BASE, CONFIG_SYS_VPC3_SIZE));
- sync_law(&im->sysconf.lpcs1aw);
-
- /*
- * Configure Flash Speed
- */
- out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG);
-
- /*
- * Configure VPC3 Speed
- */
- out_be32(&im->lpc.cs_cfg[1], CONFIG_SYS_CS1_CFG);
-
- spridr = in_be32(&im->sysconf.spridr);
- if (SVR_MJREV(spridr) >= 2)
- out_be32(&im->lpc.altr, CONFIG_SYS_CS_ALETIMING);
-
- /*
* Enable clocks
*/
out_be32(&im->clk.sccr[0], SCCR1_CLOCKS_EN);
diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c
index 97eeab3..4b58dbc 100644
--- a/board/freescale/mpc5121ads/mpc5121ads.c
+++ b/board/freescale/mpc5121ads/mpc5121ads.c
@@ -84,18 +84,6 @@
int board_early_init_f(void)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- u32 spridr;
-
- /*
- * Initialize Local Window for the CPLD registers access (CS2 selects
- * the CPLD chip)
- */
- out_be32(&im->sysconf.lpcs2aw,
- CSAW_START(CONFIG_SYS_CPLD_BASE) |
- CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE)
- );
- out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG);
- sync_law(&im->sysconf.lpcs2aw);
/*
* Disable Boot NOR FLASH write protect - CPLD Reg 8 NOR FLASH Control
@@ -114,15 +102,6 @@
out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0x32);
}
#endif
- /*
- * Configure Flash Speed
- */
- out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG);
-
- spridr = in_be32(&im->sysconf.spridr);
-
- if (SVR_MJREV (spridr) >= 2)
- out_be32 (&im->lpc.altr, CONFIG_SYS_CS_ALETIMING);
/*
* Enable clocks
diff --git a/board/pdm360ng/pdm360ng.c b/board/pdm360ng/pdm360ng.c
index a2a1323..9a164ee 100644
--- a/board/pdm360ng/pdm360ng.c
+++ b/board/pdm360ng/pdm360ng.c
@@ -64,32 +64,6 @@
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
/*
- * Initialize Local Window for FLASH-Bank1 access (CS1)
- */
- out_be32(&im->sysconf.lpcs1aw,
- CSAW_START(CONFIG_SYS_FLASH1_BASE) |
- CSAW_STOP(CONFIG_SYS_FLASH1_BASE, CONFIG_SYS_FLASH_SIZE)
- );
- out_be32(&im->lpc.cs_cfg[1], CONFIG_SYS_CS1_CFG);
-
- /*
- * Local Window for MRAM access (CS2)
- */
- out_be32(&im->sysconf.lpcs2aw,
- CSAW_START(CONFIG_SYS_MRAM_BASE) |
- CSAW_STOP(CONFIG_SYS_MRAM_BASE, CONFIG_SYS_MRAM_SIZE)
- );
- out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG);
-
- sync_law(&im->sysconf.lpcs2aw);
-
- /*
- * Configure Flash Speed
- */
- out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG);
- out_be32(&im->lpc.altr, CONFIG_SYS_CS_ALETIMING);
-
- /*
* Enable clocks
*/
out_be32(&im->clk.sccr[0], SCCR1_CLOCKS_EN);
diff --git a/include/configs/aria.h b/include/configs/aria.h
index 0b31c50..6b6e400 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -266,11 +266,16 @@
#define CONFIG_SYS_ARIA_SRAM_BASE (CONFIG_SYS_SRAM_BASE + \
CONFIG_SYS_SRAM_SIZE)
#define CONFIG_SYS_ARIA_SRAM_SIZE 0x00100000 /* reserve 1MB-window */
+#define CONFIG_SYS_CS6_START CONFIG_SYS_ARIA_SRAM_BASE
+#define CONFIG_SYS_CS6_SIZE CONFIG_SYS_ARIA_SRAM_SIZE
#define CONFIG_SYS_ARIA_FPGA_BASE (CONFIG_SYS_ARIA_SRAM_BASE + \
CONFIG_SYS_ARIA_SRAM_SIZE)
#define CONFIG_SYS_ARIA_FPGA_SIZE 0x20000 /* 128 KB */
+#define CONFIG_SYS_CS2_START CONFIG_SYS_ARIA_FPGA_BASE
+#define CONFIG_SYS_CS2_SIZE CONFIG_SYS_ARIA_FPGA_SIZE
+
#define CONFIG_SYS_CS0_CFG 0x05059150
#define CONFIG_SYS_CS2_CFG ( (5 << 24) | \
(5 << 16) | \
diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index cafc273..1e09ff2 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -191,6 +191,10 @@
#define CONFIG_SYS_SRAM_BASE 0x30000000
#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */
+/* Initialize Local Window for NOR FLASH access */
+#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
+
/* ALE active low, data size 4bytes */
#define CONFIG_SYS_CS0_CFG 0x05051150
@@ -201,6 +205,9 @@
#define CONFIG_SYS_CS1_CFG 0x1f1f3090
#define CONFIG_SYS_VPC3_BASE 0x82000000 /* start of VPC3 space */
#define CONFIG_SYS_VPC3_SIZE 0x00010000 /* max VPC3 size */
+/* Initialize Local Window for VPC3 access */
+#define CONFIG_SYS_CS1_START CONFIG_SYS_VPC3_BASE
+#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_VPC3_SIZE
/* Use SRAM for initial stack */
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Init RAM addr */
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 3f55d35..a64df61 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -258,6 +258,8 @@
*/
#define CONFIG_SYS_CPLD_BASE 0x82000000
#define CONFIG_SYS_CPLD_SIZE 0x00010000 /* 64 KB */
+#define CONFIG_SYS_CS2_START CONFIG_SYS_CPLD_BASE
+#define CONFIG_SYS_CS2_SIZE CONFIG_SYS_CPLD_SIZE
#define CONFIG_SYS_SRAM_BASE 0x30000000
#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */
diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h
index 671e9eb..0773121 100644
--- a/include/configs/pdm360ng.h
+++ b/include/configs/pdm360ng.h
@@ -206,6 +206,9 @@
#define CONFIG_SYS_SRAM_BASE 0x50000000
#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */
+#define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH1_BASE
+#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_FLASH_SIZE
+
/* ALE active low, data size 4 bytes */
#define CONFIG_SYS_CS0_CFG 0x05059350
/* ALE active low, data size 4 bytes */
@@ -213,6 +216,9 @@
#define CONFIG_SYS_MRAM_BASE 0x50040000
#define CONFIG_SYS_MRAM_SIZE 0x00020000
+#define CONFIG_SYS_CS2_START CONFIG_SYS_MRAM_BASE
+#define CONFIG_SYS_CS2_SIZE CONFIG_SYS_MRAM_SIZE
+
/* ALE active low, data size 4 bytes */
#define CONFIG_SYS_CS2_CFG 0x05059110