rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/cpu/arm720t/interrupts.c b/cpu/arm720t/interrupts.c
index 9854016..39ed345 100644
--- a/cpu/arm720t/interrupts.c
+++ b/cpu/arm720t/interrupts.c
@@ -95,7 +95,7 @@
unsigned int *pTime = (unsigned int *)data;
(*pTime)++;
- if ( !(*pTime % (CFG_HZ/4))) {
+ if ( !(*pTime % (CONFIG_SYS_HZ/4))) {
/* toggle LED 0 */
PUT_REG( REG_IOPDATA, GET_REG(REG_IOPDATA) ^ 0x1);
}
@@ -118,7 +118,7 @@
IRQEN = 0;
/* operate timer 2 in non-prescale mode */
- TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CFG_HZ) |
+ TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CONFIG_SYS_HZ) |
NETARM_GEN_TCTL_ENABLE |
NETARM_GEN_TCTL_INIT_COUNT(TIMER_LOAD_VAL));
@@ -166,9 +166,9 @@
/*
* Load Timer data register with count down value.
- * count_down_val = CFG_SYS_CLK_FREQ/CFG_HZ
+ * count_down_val = CONFIG_SYS_SYS_CLK_FREQ/CONFIG_SYS_HZ
*/
- PUT_REG( REG_TDATA0, (CFG_SYS_CLK_FREQ / CFG_HZ));
+ PUT_REG( REG_TDATA0, (CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ));
/*
* Enable global interrupt
@@ -181,7 +181,7 @@
#elif defined(CONFIG_LPC2292)
PUT32(T0IR, 0); /* disable all timer0 interrupts */
PUT32(T0TCR, 0); /* disable timer0 */
- PUT32(T0PR, CFG_SYS_CLK_FREQ / CFG_HZ);
+ PUT32(T0PR, CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ);
PUT32(T0MCR, 0);
PUT32(T0TC, 0);
PUT32(T0TCR, 1); /* enable timer0 */
@@ -223,7 +223,7 @@
ulong tmo;
tmo = usec / 1000;
- tmo *= CFG_HZ;
+ tmo *= CONFIG_SYS_HZ;
tmo /= 1000;
tmo += get_timer (0);
@@ -268,10 +268,10 @@
if (usec >= 1000) {
tmo = usec / 1000;
- tmo *= CFG_HZ;
+ tmo *= CONFIG_SYS_HZ;
tmo /= 1000;
} else {
- tmo = usec * CFG_HZ;
+ tmo = usec * CONFIG_SYS_HZ;
tmo /= (1000*1000);
}
@@ -294,7 +294,7 @@
{
u32 ticks;
- ticks = (usec * CFG_HZ) / 1000000;
+ ticks = (usec * CONFIG_SYS_HZ) / 1000000;
ticks += get_timer (0);