blob: 1c94a76d48236be33415df8834834f22f3848794 [file] [log] [blame]
/*
* (C) Copyright 2002 ELTEC Elektronik AG
* Frank Gottschling <fgottschling@eltec.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/* includes */
#include <common.h>
#include <linux/ctype.h>
#include <pci.h>
#include <net.h>
#include <mpc106.h>
#include <w83c553f.h>
#include "srom.h"
/* imports */
extern char console_buffer[CONFIG_SYS_CBSIZE];
extern int l2_cache_enable (int l2control);
extern void *nvram_read (void *dest, const short src, size_t count);
extern void nvram_write (short dest, const void *src, size_t count);
/* globals */
unsigned int ata_reset_time = 60;
unsigned int scsi_reset_time = 10;
unsigned int eltec_board;
/* BAB750 uses SYM53C875(default) and BAB740 uses SYM53C860
* values fixed after board identification
*/
unsigned short scsi_dev_id = PCI_DEVICE_ID_NCR_53C875;
unsigned int scsi_max_scsi_id = 15;
unsigned char scsi_sym53c8xx_ccf = 0x13;
/*----------------------------------------------------------------------------*/
/*
* handle sroms on BAB740/750
* fix ether address
* L2 cache initialization
* ide dma control
*/
int misc_init_r (void)
{
revinfo eerev;
char *ptr;
u_int i, l, initSrom, copyNv;
char buf[256];
char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0,
0, 0, 0, 0, 10, 11, 12, 13, 14, 15 };
pci_dev_t bdf;
char sromSYM[] = {
#ifdef TULIP_BUG
/* 10BaseT, 100BaseTx no full duplex modes */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x04, 0x01, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x08,
0x02, 0x86, 0x02, 0x00, 0xaf, 0x08, 0xa5, 0x00,
0x88, 0x04, 0x03, 0x27, 0x08, 0x25, 0x00, 0x61,
0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xe8
#endif
/* 10BaseT, 10BaseT-FD, 100BaseTx, 100BaseTx-FD */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x04, 0x01, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x08,
0x04, 0x86, 0x02, 0x00, 0xaf, 0x08, 0xa5, 0x00,
0x86, 0x02, 0x04, 0xaf, 0x08, 0xa5, 0x00, 0x88,
0x04, 0x03, 0x27, 0x08, 0x25, 0x00, 0x61, 0x80,
0x88, 0x04, 0x05, 0x27, 0x08, 0x25, 0x00, 0x61,
0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x77
};
char sromMII[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x04, 0x01, 0x00, 0x00, 0x5b, 0x00,
0x2e, 0x4d, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x08,
0x01, 0x95, 0x03, 0x00, 0x00, 0x04, 0x01, 0x08,
0x00, 0x00, 0x02, 0x08, 0x02, 0x00, 0x00, 0x78,
0xe0, 0x01, 0x00, 0x50, 0x00, 0x18, 0x80, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xde, 0x41
};
/*
* Check/Remake revision info
*/
initSrom = 0;
copyNv = 0;
/* read out current revision srom contens */
el_srom_load (0x0000, (u_char*)&eerev, sizeof(revinfo),
SECOND_DEVICE, FIRST_BLOCK);
/* read out current nvram shadow image */
nvram_read (buf, CONFIG_SYS_NV_SROM_COPY_ADDR, CONFIG_SYS_SROM_SIZE);
if (strcmp (eerev.magic, "ELTEC") != 0)
{
/* srom is not initialized -> create a default revision info */
for (i = 0, ptr = (char *)&eerev; i < sizeof(revinfo); i++)
*ptr++ = 0x00;
strcpy(eerev.magic, "ELTEC");
eerev.revrev[0] = 1;
eerev.revrev[1] = 0;
eerev.size = 0x00E0;
eerev.category[0] = 0x01;
/* node id from dead e128 as default */
eerev.etheraddr[0] = 0x00;
eerev.etheraddr[1] = 0x00;
eerev.etheraddr[2] = 0x5B;
eerev.etheraddr[3] = 0x00;
eerev.etheraddr[4] = 0x2E;
eerev.etheraddr[5] = 0x4D;
/* cache config word for bab750 */
*(int*)&eerev.res[0] = CLK2P0TO1_1MB_PB_0P5DH;
initSrom = 1; /* force dialog */
copyNv = 1; /* copy to nvram */
}
if ((copyNv == 0) && (el_srom_checksum((u_char*)&eerev, CONFIG_SYS_SROM_SIZE) !=
el_srom_checksum((u_char*)buf, CONFIG_SYS_SROM_SIZE)))
{
printf ("Invalid revision info copy in nvram !\n");
printf ("Press key:\n <c> to copy current revision info to nvram.\n");
printf (" <r> to reenter revision info.\n");
printf ("=> ");
if (0 != readline (NULL))
{
switch ((char)toupper(console_buffer[0]))
{
case 'C':
copyNv = 1;
break;
case 'R':
copyNv = 1;
initSrom = 1;
break;
}
}
}
if (initSrom)
{
memcpy (buf, &eerev.revision[0][0], 14); /* save all revision info */
printf ("Enter revision number (0-9): %c ", eerev.revision[0][0]);
if (0 != readline (NULL))
{
eerev.revision[0][0] = (char)toupper(console_buffer[0]);
memcpy (&eerev.revision[1][0], buf, 12); /* shift rest of rev info */
}
printf ("Enter revision character (A-Z): %c ", eerev.revision[0][1]);
if (1 == readline (NULL))
{
eerev.revision[0][1] = (char)toupper(console_buffer[0]);
}
printf ("Enter board name (V-XXXX-XXXX): %s ", (char *)&eerev.board);
if (11 == readline (NULL))
{
for (i=0; i<11; i++)
eerev.board[i] = (char)toupper(console_buffer[i]);
eerev.board[11] = '\0';
}
printf ("Enter serial number: %s ", (char *)&eerev.serial );
if (6 == readline (NULL))
{
for (i=0; i<6; i++)
eerev.serial[i] = console_buffer[i];
eerev.serial[6] = '\0';
}
printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ",
eerev.etheraddr[0], eerev.etheraddr[1],
eerev.etheraddr[2], eerev.etheraddr[3],
eerev.etheraddr[4], eerev.etheraddr[5]);
if (12 == readline (NULL))
{
for (i=0; i<12; i+=2)
eerev.etheraddr[i>>1] = (char)(16*hex[toupper(console_buffer[i])-'0'] +
hex[toupper(console_buffer[i+1])-'0']);
}
l = strlen ((char *)&eerev.text);
printf("Add to text section (max 64 chr): %s ", (char *)&eerev.text );
if (0 != readline (NULL))
{
for (i = l; i<63; i++)
eerev.text[i] = console_buffer[i-l];
eerev.text[63] = '\0';
}
if (strstr ((char *)&eerev.board, "75") != NULL)
eltec_board = 750;
else
eltec_board = 740;
if (eltec_board == 750)
{
if (CPU_TYPE == CPU_TYPE_750)
*(int*)&eerev.res[0] = CLK2P0TO1_1MB_PB_0P5DH;
else
*(int*)&eerev.res[0] = CLK2P5TO1_1MB_PB_0P5DH;
printf("Enter L2Cache config word with leading zero (HEX): %08X ",
*(int*)&eerev.res[0] );
if (0 != readline (NULL))
{
for (i=0; i<7; i+=2)
{
eerev.res[i>>1] =
(char)(16*hex[toupper(console_buffer[i])-'0'] +
hex[toupper(console_buffer[i+1])-'0']);
}
}
/* prepare network eeprom */
sromMII[20] = eerev.etheraddr[0];
sromMII[21] = eerev.etheraddr[1];
sromMII[22] = eerev.etheraddr[2];
sromMII[23] = eerev.etheraddr[3];
sromMII[24] = eerev.etheraddr[4];
sromMII[25] = eerev.etheraddr[5];
printf("\nSRom: Writing DEC21143 MII info .. ");
if (dc_srom_store ((u_short *)sromMII) == -1)
printf("FAILED\n");
else
printf("OK\n");
}
if (eltec_board == 740)
{
*(int *)&eerev.res[0] = 0;
sromSYM[20] = eerev.etheraddr[0];
sromSYM[21] = eerev.etheraddr[1];
sromSYM[22] = eerev.etheraddr[2];
sromSYM[23] = eerev.etheraddr[3];
sromSYM[24] = eerev.etheraddr[4];
sromSYM[25] = eerev.etheraddr[5];
printf("\nSRom: Writing DEC21143 SYM info .. ");
if (dc_srom_store ((u_short *)sromSYM) == -1)
printf("FAILED\n");
else
printf("OK\n");
}
/* update CRC */
eerev.crc = el_srom_checksum((u_char *)eerev.board, eerev.size);
/* write new values */
printf("\nSRom: Writing revision info ...... ");
if (el_srom_store((BLOCK_SIZE-sizeof(revinfo)), (u_char *)&eerev,
sizeof(revinfo), SECOND_DEVICE, FIRST_BLOCK) == -1)
printf("FAILED\n\n");
else
printf("OK\n\n");
/* write new values as shadow image to nvram */
nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *)&eerev, CONFIG_SYS_SROM_SIZE);
} /*if (initSrom) */
/* copy current values as shadow image to nvram */
if (initSrom == 0 && copyNv == 1)
nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *)&eerev, CONFIG_SYS_SROM_SIZE);
/* update environment */
sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x",
eerev.etheraddr[0], eerev.etheraddr[1],
eerev.etheraddr[2], eerev.etheraddr[3],
eerev.etheraddr[4], eerev.etheraddr[5]);
setenv ("ethaddr", buf);
/* print actual board identification */
printf("Ident: %s Ser %s Rev %c%c\n",
eerev.board, (char *)&eerev.serial,
eerev.revision[0][0], eerev.revision[0][1]);
/* global board ident */
if (strstr ((char *)&eerev.board, "75") != NULL)
eltec_board = 750;
else
eltec_board = 740;
/*
* L2 cache configuration
*/
#if defined(CONFIG_SYS_L2_BAB7xx)
ptr = getenv("l2cache");
if (*ptr == '0')
{
printf ("Cache: L2 NOT activated on BAB%d\n", eltec_board);
}
else
{
printf ("Cache: L2 activated on BAB%d\n", eltec_board);
l2_cache_enable(*(int*)&eerev.res[0]);
}
#endif
/*
* Reconfig ata reset timeout from environment
*/
if ((ptr = getenv ("ata_reset_time")) != NULL)
{
ata_reset_time = (int)simple_strtoul (ptr, NULL, 10);
}
else
{
sprintf (buf, "%d", ata_reset_time);
setenv ("ata_reset_time", buf);
}
/*
* Reconfig scsi reset timeout from environment
*/
if ((ptr = getenv ("scsi_reset_time")) != NULL)
{
scsi_reset_time = (int)simple_strtoul (ptr, NULL, 10);
}
else
{
sprintf (buf, "%d", scsi_reset_time);
setenv ("scsi_reset_time", buf);
}
if ((bdf = pci_find_device(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_83C553, 0)) > 0)
{
if (pci_find_device(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C860, 0) > 0)
{
/* BAB740 with SCSI=IRQ 11; SCC=IRQ 9; no IDE; NCR860 at 80 Mhz */
scsi_dev_id = PCI_DEVICE_ID_NCR_53C860;
scsi_max_scsi_id = 7;
scsi_sym53c8xx_ccf = 0x15;
pci_write_config_byte (bdf, WINBOND_IDEIRCR, 0xb0);
}
if ((ptr = getenv ("ide_dma_off")) != NULL)
{
u_long dma_off = simple_strtoul (ptr, NULL, 10);
/*
* setup user defined registers
* s.a. linux/drivers/ide/sl82c105.c
*/
bdf |= PCI_BDF(0,0,1); /* ide user reg at bdf function 1 */
if (dma_off & 1)
{
pci_write_config_byte (bdf, 0x46, 1);
printf("IDE: DMA off flag set: Bus 0 : Dev 0\n");
}
if (dma_off & 2)
{
pci_write_config_byte (bdf, 0x4a, 1);
printf("IDE: DMA off flag set: Bus 0 : Dev 1\n");
}
if (dma_off & 4)
{
pci_write_config_byte (bdf, 0x4e, 1);
printf("IDE: DMA off flag set: Bus 1 : Dev 0\n");
}
if (dma_off & 8)
{
pci_write_config_byte (bdf, 0x52, 1);
printf("IDE: DMA off flag set: Bus 1 : Dev 1\n");
}
}
}
return (0);
}
/*----------------------------------------------------------------------------*/
/*
* BAB740 uses KENDIN KS8761 modem chip with not common setup values
*/
#ifdef CONFIG_TULIP_SELECT_MEDIA
/* Register bits.
*/
#define BMR_SWR 0x00000001 /* Software Reset */
#define STS_TS 0x00700000 /* Transmit Process State */
#define STS_RS 0x000e0000 /* Receive Process State */
#define OMR_ST 0x00002000 /* Start/Stop Transmission Command */
#define OMR_SR 0x00000002 /* Start/Stop Receive */
#define OMR_PS 0x00040000 /* Port Select */
#define OMR_SDP 0x02000000 /* SD Polarity - MUST BE ASSERTED */
#define OMR_PM 0x00000080 /* Pass All Multicast */
#define OMR_PR 0x00000040 /* Promiscuous Mode */
#define OMR_PCS 0x00800000 /* PCS Function */
#define OMR_TTM 0x00400000 /* Transmit Threshold Mode */
/* Ethernet chip registers.
*/
#define DE4X5_BMR 0x000 /* Bus Mode Register */
#define DE4X5_TPD 0x008 /* Transmit Poll Demand Reg */
#define DE4X5_RRBA 0x018 /* RX Ring Base Address Reg */
#define DE4X5_TRBA 0x020 /* TX Ring Base Address Reg */
#define DE4X5_STS 0x028 /* Status Register */
#define DE4X5_OMR 0x030 /* Operation Mode Register */
#define DE4X5_SISR 0x060 /* SIA Status Register */
#define DE4X5_SICR 0x068 /* SIA Connectivity Register */
#define DE4X5_TXRX 0x070 /* SIA Transmit and Receive Register */
#define DE4X5_GPPR 0x078 /* General Purpose Port register */
#define DE4X5_APROM 0x048 /* Ethernet Address PROM */
/*----------------------------------------------------------------------------*/
static int INL(struct eth_device* dev, u_long addr)
{
return le32_to_cpu(*(volatile u_long *)(addr + dev->iobase));
}
/*----------------------------------------------------------------------------*/
static void OUTL(struct eth_device* dev, int command, u_long addr)
{
*(volatile u_long *)(addr + dev->iobase) = cpu_to_le32(command);
}
/*----------------------------------------------------------------------------*/
static void media_reg_init (
struct eth_device* dev,
u32 csr14,
u32 csr15_dir,
u32 csr15_v0,
u32 csr15_v1,
u32 csr6 )
{
OUTL(dev, 0, DE4X5_OMR); /* CSR6 */
udelay(10 * 1000);
OUTL(dev, 0, DE4X5_SICR); /* CSR13 */
OUTL(dev, 1, DE4X5_SICR); /* CSR13 */
udelay(10 * 1000);
OUTL(dev, csr14, DE4X5_TXRX); /* CSR14 */
OUTL(dev, csr15_dir, DE4X5_GPPR); /* CSR15 */
OUTL(dev, csr15_v0, DE4X5_GPPR); /* CSR15 */
udelay(10 * 1000);
OUTL(dev, csr15_v1, DE4X5_GPPR); /* CSR15 */
OUTL(dev, 0x00000301, DE4X5_SISR); /* CSR12 */
OUTL(dev, csr6, DE4X5_OMR); /* CSR6 */
}
/*----------------------------------------------------------------------------*/
void dc21x4x_select_media(struct eth_device* dev)
{
int i, status, ext;
extern unsigned int eltec_board;
if (eltec_board == 740)
{
printf("SYM media select "); /* BAB740 */
/* start autoneg. with 10 mbit */
media_reg_init (dev, 0x3ffff, 0x08af0008, 0x00a10008, 0x00a50008, 0x02400080);
ext = status = 0;
for (i=0; i<2000+ext; i++)
{
status = INL(dev, DE4X5_SISR);
udelay(1000);
if (status & 0x2000) ext = 2000;
if ((status & 0x7000) == 0x5000) break;
}
/* autoneg. ok -> 100MB FD */
if ((status & 0x0100f000) == 0x0100d000)
{
media_reg_init (dev, 0x37f7f, 0x08270008, 0x00210008, 0x00250008, 0x03c40280);
printf("100baseTx-FD\n");
}
/* autoneg. ok -> 100MB HD */
else if ((status & 0x0080f000) == 0x0080d000)
{
media_reg_init (dev, 0x17f7f, 0x08270008, 0x00210008, 0x00250008, 0x03c40080);
printf("100baseTx\n");
}
/* autoneg. ok -> 10MB FD */
else if ((status & 0x0040f000) == 0x0040d000)
{
media_reg_init (dev, 0x07f7f, 0x08af0008, 0x00a10008, 0x00a50008, 0x02400280);
printf("10baseT-FD\n");
}
/* autoneg. fail -> 10MB HD */
else
{
media_reg_init (dev, 0x7f7f, 0x08af0008, 0x00a10008, 0x00a50008,
(OMR_SDP | OMR_TTM | OMR_PM));
printf("10baseT\n");
}
}
else
{
printf("MII media selected\n"); /* BAB750 */
OUTL(dev, OMR_SDP | OMR_PS | OMR_PM, DE4X5_OMR); /* CSR6 */
}
}
#endif /* CONFIG_TULIP_SELECT_MEDIA */
/*---------------------------------------------------------------------------*/