blob: b6eb28e9c8a62626fe3b20f5c0b0da028ae32bb2 [file] [log] [blame]
/*
* Copyright 2007-2008 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/immap_85xx.h>
#include <asm/immap_fsl_pci.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/io.h>
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
#include "../common/pixis.h"
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif
long int fixed_sdram(void);
int checkboard (void)
{
printf ("Board: MPC8572DS, System ID: 0x%02x, "
"System Version: 0x%02x, FPGA Version: 0x%02x\n",
in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
in8(PIXIS_BASE + PIXIS_PVER));
return 0;
}
phys_size_t initdram(int board_type)
{
phys_size_t dram_size = 0;
puts("Initializing....");
#ifdef CONFIG_SPD_EEPROM
dram_size = fsl_ddr_sdram();
dram_size = setup_ddr_tlbs(dram_size / 0x100000);
dram_size *= 0x100000;
#else
dram_size = fixed_sdram();
#endif
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/*
* Initialize and enable DDR ECC.
*/
ddr_enable_ecc(dram_size);
#endif
puts(" DDR: ");
return dram_size;
}
#if !defined(CONFIG_SPD_EEPROM)
/*
* Fixed sdram init -- doesn't use serial presence detect.
*/
phys_size_t fixed_sdram (void)
{
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile ccsr_ddr_t *ddr= &immap->im_ddr;
uint d_init;
ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
#if defined (CONFIG_DDR_ECC)
ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN;
ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS;
ddr->err_sbe = CONFIG_SYS_DDR_SBE;
#endif
asm("sync;isync");
udelay(500);
ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
d_init = 1;
debug("DDR - 1st controller: memory initializing\n");
/*
* Poll until memory is initialized.
* 512 Meg at 400 might hit this 200 times or so.
*/
while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
udelay(1000);
}
debug("DDR: memory initialized\n\n");
asm("sync; isync");
udelay(500);
#endif
return 512 * 1024 * 1024;
}
#endif
#ifdef CONFIG_PCIE1
static struct pci_controller pcie1_hose;
#endif
#ifdef CONFIG_PCIE2
static struct pci_controller pcie2_hose;
#endif
#ifdef CONFIG_PCIE3
static struct pci_controller pcie3_hose;
#endif
int first_free_busno=0;
#ifdef CONFIG_PCI
void pci_init_board(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
uint devdisr = gur->devdisr;
uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
devdisr, io_sel, host_agent);
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
printf (" eTSEC1 is in sgmii mode.\n");
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
printf (" eTSEC2 is in sgmii mode.\n");
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
printf (" eTSEC3 is in sgmii mode.\n");
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
printf (" eTSEC4 is in sgmii mode.\n");
#ifdef CONFIG_PCIE3
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
extern void fsl_pci_init(struct pci_controller *hose);
struct pci_controller *hose = &pcie3_hose;
int pcie_ep = (host_agent == 0) || (host_agent == 3) ||
(host_agent == 5) || (host_agent == 6);
int pcie_configured = io_sel >= 1;
u32 temp32;
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE3 connected to ULI as %s (base address %x)",
pcie_ep ? "End Point" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det) {
pci->pme_msg_det = 0xffffffff;
debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
}
printf ("\n");
/* inbound */
pci_set_region(hose->regions + 0,
CONFIG_SYS_PCI_MEMORY_BUS,
CONFIG_SYS_PCI_MEMORY_PHYS,
CONFIG_SYS_PCI_MEMORY_SIZE,
PCI_REGION_MEM | PCI_REGION_MEMORY);
/* outbound memory */
pci_set_region(hose->regions + 1,
CONFIG_SYS_PCIE3_MEM_BASE,
CONFIG_SYS_PCIE3_MEM_PHYS,
CONFIG_SYS_PCIE3_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(hose->regions + 2,
CONFIG_SYS_PCIE3_IO_BASE,
CONFIG_SYS_PCIE3_IO_PHYS,
CONFIG_SYS_PCIE3_IO_SIZE,
PCI_REGION_IO);
hose->region_count = 3;
hose->first_busno=first_free_busno;
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
fsl_pci_init(hose);
first_free_busno=hose->last_busno+1;
printf (" PCIE3 on bus %02x - %02x\n",
hose->first_busno,hose->last_busno);
/*
* Activate ULI1575 legacy chip by performing a fake
* memory access. Needed to make ULI RTC work.
* Device 1d has the first on-board memory BAR.
*/
pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0 ),
PCI_BASE_ADDRESS_1, &temp32);
if (temp32 >= CONFIG_SYS_PCIE3_MEM_PHYS) {
debug(" uli1572 read to %x\n", temp32);
in_be32((unsigned *)temp32);
}
} else {
printf (" PCIE3: disabled\n");
}
}
#else
gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */
#endif
#ifdef CONFIG_PCIE2
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
extern void fsl_pci_init(struct pci_controller *hose);
struct pci_controller *hose = &pcie2_hose;
int pcie_ep = (host_agent == 2) || (host_agent == 4) ||
(host_agent == 6);
int pcie_configured = io_sel & 4;
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)",
pcie_ep ? "End Point" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det) {
pci->pme_msg_det = 0xffffffff;
debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
}
printf ("\n");
/* inbound */
pci_set_region(hose->regions + 0,
CONFIG_SYS_PCI_MEMORY_BUS,
CONFIG_SYS_PCI_MEMORY_PHYS,
CONFIG_SYS_PCI_MEMORY_SIZE,
PCI_REGION_MEM | PCI_REGION_MEMORY);
/* outbound memory */
pci_set_region(hose->regions + 1,
CONFIG_SYS_PCIE2_MEM_BASE,
CONFIG_SYS_PCIE2_MEM_PHYS,
CONFIG_SYS_PCIE2_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(hose->regions + 2,
CONFIG_SYS_PCIE2_IO_BASE,
CONFIG_SYS_PCIE2_IO_PHYS,
CONFIG_SYS_PCIE2_IO_SIZE,
PCI_REGION_IO);
hose->region_count = 3;
hose->first_busno=first_free_busno;
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
fsl_pci_init(hose);
first_free_busno=hose->last_busno+1;
printf (" PCIE2 on bus %02x - %02x\n",
hose->first_busno,hose->last_busno);
} else {
printf (" PCIE2: disabled\n");
}
}
#else
gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */
#endif
#ifdef CONFIG_PCIE1
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
extern void fsl_pci_init(struct pci_controller *hose);
struct pci_controller *hose = &pcie1_hose;
int pcie_ep = (host_agent == 1) || (host_agent == 4) ||
(host_agent == 5);
int pcie_configured = io_sel & 6;
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE1 connected to Slot 2 as %s (base address %x)",
pcie_ep ? "End Point" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det) {
pci->pme_msg_det = 0xffffffff;
debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
}
printf ("\n");
/* inbound */
pci_set_region(hose->regions + 0,
CONFIG_SYS_PCI_MEMORY_BUS,
CONFIG_SYS_PCI_MEMORY_PHYS,
CONFIG_SYS_PCI_MEMORY_SIZE,
PCI_REGION_MEM | PCI_REGION_MEMORY);
/* outbound memory */
pci_set_region(hose->regions + 1,
CONFIG_SYS_PCIE1_MEM_BASE,
CONFIG_SYS_PCIE1_MEM_PHYS,
CONFIG_SYS_PCIE1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(hose->regions + 2,
CONFIG_SYS_PCIE1_IO_BASE,
CONFIG_SYS_PCIE1_IO_PHYS,
CONFIG_SYS_PCIE1_IO_SIZE,
PCI_REGION_IO);
hose->region_count = 3;
hose->first_busno=first_free_busno;
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
fsl_pci_init(hose);
first_free_busno=hose->last_busno+1;
printf(" PCIE1 on bus %02x - %02x\n",
hose->first_busno,hose->last_busno);
} else {
printf (" PCIE1: disabled\n");
}
}
#else
gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
#endif
}
#endif
int board_early_init_r(void)
{
unsigned int i;
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
const u8 flash_esel = 2;
/*
* Remap Boot flash + PROMJET region to caching-inhibited
* so that flash can be erased properly.
*/
/* Invalidate any remaining lines of the flash from caches. */
for (i = 0; i < 256*1024*1024; i+=32) {
asm volatile ("dcbi %0,%1": : "b" (flashbase), "r" (i));
asm volatile ("icbi %0,%1": : "b" (flashbase), "r" (i));
}
/* invalidate existing TLB entry for flash + promjet */
disable_tlb(flash_esel);
set_tlb(1, flashbase, flashbase, /* tlb, epn, rpn */
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */
return 0;
}
#ifdef CONFIG_GET_CLK_FROM_ICS307
/* decode S[0-2] to Output Divider (OD) */
static unsigned char ics307_S_to_OD[] = {
10, 2, 8, 4, 5, 7, 3, 6
};
/* Calculate frequency being generated by ICS307-02 clock chip based upon
* the control bytes being programmed into it. */
/* XXX: This function should probably go into a common library */
static unsigned long
ics307_clk_freq (unsigned char cw0, unsigned char cw1, unsigned char cw2)
{
const unsigned long InputFrequency = CONFIG_ICS307_REFCLK_HZ;
unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1);
unsigned long RDW = cw2 & 0x7F;
unsigned long OD = ics307_S_to_OD[cw0 & 0x7];
unsigned long freq;
/* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */
/* cw0: C1 C0 TTL F1 F0 S2 S1 S0
* cw1: V8 V7 V6 V5 V4 V3 V2 V1
* cw2: V0 R6 R5 R4 R3 R2 R1 R0
*
* R6:R0 = Reference Divider Word (RDW)
* V8:V0 = VCO Divider Word (VDW)
* S2:S0 = Output Divider Select (OD)
* F1:F0 = Function of CLK2 Output
* TTL = duty cycle
* C1:C0 = internal load capacitance for cyrstal
*/
/* Adding 1 to get a "nicely" rounded number, but this needs
* more tweaking to get a "properly" rounded number. */
freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD));
debug("ICS307: CW[0-2]: %02X %02X %02X => %u Hz\n", cw0, cw1, cw2,
freq);
return freq;
}
unsigned long get_board_sys_clk(ulong dummy)
{
return ics307_clk_freq (
in8(PIXIS_BASE + PIXIS_VSYSCLK0),
in8(PIXIS_BASE + PIXIS_VSYSCLK1),
in8(PIXIS_BASE + PIXIS_VSYSCLK2)
);
}
unsigned long get_board_ddr_clk(ulong dummy)
{
return ics307_clk_freq (
in8(PIXIS_BASE + PIXIS_VDDRCLK0),
in8(PIXIS_BASE + PIXIS_VDDRCLK1),
in8(PIXIS_BASE + PIXIS_VDDRCLK2)
);
}
#else
unsigned long get_board_sys_clk(ulong dummy)
{
u8 i;
ulong val = 0;
i = in8(PIXIS_BASE + PIXIS_SPD);
i &= 0x07;
switch (i) {
case 0:
val = 33333333;
break;
case 1:
val = 40000000;
break;
case 2:
val = 50000000;
break;
case 3:
val = 66666666;
break;
case 4:
val = 83333333;
break;
case 5:
val = 100000000;
break;
case 6:
val = 133333333;
break;
case 7:
val = 166666666;
break;
}
return val;
}
unsigned long get_board_ddr_clk(ulong dummy)
{
u8 i;
ulong val = 0;
i = in8(PIXIS_BASE + PIXIS_SPD);
i &= 0x38;
i >>= 3;
switch (i) {
case 0:
val = 33333333;
break;
case 1:
val = 40000000;
break;
case 2:
val = 50000000;
break;
case 3:
val = 66666666;
break;
case 4:
val = 83333333;
break;
case 5:
val = 100000000;
break;
case 6:
val = 133333333;
break;
case 7:
val = 166666666;
break;
}
return val;
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
int node, tmp[2];
const char *path;
ulong base, size;
ft_cpu_setup(blob, bd);
base = getenv_bootm_low();
size = getenv_bootm_size();
fdt_fixup_memory(blob, (u64)base, (u64)size);
node = fdt_path_offset(blob, "/aliases");
tmp[0] = 0;
if (node >= 0) {
#ifdef CONFIG_PCIE3
path = fdt_getprop(blob, node, "pci0", NULL);
if (path) {
tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;
do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
}
#endif
#ifdef CONFIG_PCIE2
path = fdt_getprop(blob, node, "pci1", NULL);
if (path) {
tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
}
#endif
#ifdef CONFIG_PCIE1
path = fdt_getprop(blob, node, "pci2", NULL);
if (path) {
tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
}
#endif
}
}
#endif
#ifdef CONFIG_MP
extern void cpu_mp_lmb_reserve(struct lmb *lmb);
void board_lmb_reserve(struct lmb *lmb)
{
cpu_mp_lmb_reserve(lmb);
}
#endif