blob: d1800ede05653803f57eeafb152d3a83bbfb428f [file] [log] [blame]
/*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <74xx_7xx.h>
#include <asm/processor.h>
#ifdef CONFIG_AMIGAONEG3SE
#include "../board/MAI/AmigaOneG3SE/via686.h"
#endif
DECLARE_GLOBAL_DATA_PTR;
static const int hid1_multipliers_x_10[] = {
25, /* 0000 - 2.5x */
75, /* 0001 - 7.5x */
70, /* 0010 - 7x */
10, /* 0011 - bypass */
20, /* 0100 - 2x */
65, /* 0101 - 6.5x */
100, /* 0110 - 10x */
45, /* 0111 - 4.5x */
30, /* 1000 - 3x */
55, /* 1001 - 5.5x */
40, /* 1010 - 4x */
50, /* 1011 - 5x */
80, /* 1100 - 8x */
60, /* 1101 - 6x */
35, /* 1110 - 3.5x */
0 /* 1111 - off */
};
static const int hid1_fx_multipliers_x_10[] = {
00, /* 0000 - off */
00, /* 0001 - off */
10, /* 0010 - bypass */
10, /* 0011 - bypass */
20, /* 0100 - 2x */
25, /* 0101 - 2.5x */
30, /* 0110 - 3x */
35, /* 0111 - 3.5x */
40, /* 1000 - 4x */
45, /* 1001 - 4.5x */
50, /* 1010 - 5x */
55, /* 1011 - 5.5x */
60, /* 1100 - 6x */
65, /* 1101 - 6.5x */
70, /* 1110 - 7x */
75, /* 1111 - 7.5 */
80, /* 10000 - 8x */
85, /* 10001 - 8.5x */
90, /* 10010 - 9x */
95, /* 10011 - 9.5x */
100, /* 10100 - 10x */
110, /* 10101 - 11x */
120, /* 10110 - 12x */
};
/* ------------------------------------------------------------------------- */
/*
* Measure CPU clock speed (core clock GCLK1, GCLK2)
*
* (Approx. GCLK frequency in Hz)
*/
int get_clocks (void)
{
ulong clock = 0;
/* calculate the clock frequency based upon the CPU type */
switch (get_cpu_type()) {
case CPU_7448:
case CPU_7455:
case CPU_7457:
/*
* It is assumed that the PLL_EXT line is zero.
* Make sure division is done before multiplication to prevent 32-bit
* arithmetic overflows which will cause a negative number
*/
clock = (CFG_BUS_CLK / 10) * hid1_multipliers_x_10[(get_hid1 () >> 13) & 0xF];
break;
case CPU_750GX:
case CPU_750FX:
clock = CFG_BUS_CLK * hid1_fx_multipliers_x_10[get_hid1 () >> 27] / 10;
break;
case CPU_7450:
case CPU_740:
case CPU_740P:
case CPU_745:
case CPU_750CX:
case CPU_750:
case CPU_750P:
case CPU_755:
case CPU_7400:
case CPU_7410:
/*
* Make sure division is done before multiplication to prevent 32-bit
* arithmetic overflows which will cause a negative number
*/
clock = (CFG_BUS_CLK / 10) * hid1_multipliers_x_10[get_hid1 () >> 28];
break;
case CPU_UNKNOWN:
printf ("get_gclk_freq(): unknown CPU type\n");
clock = 0;
return (1);
}
gd->cpu_clk = clock;
gd->bus_clk = CFG_BUS_CLK;
return (0);
}
/* ------------------------------------------------------------------------- */