Merge branch 'master' of git://git.denx.de/u-boot-arm

Bringing in the MMC tree means that CONFIG_BOUNCE_BUFFER needed to be
added to include/configs/exynos5-dt.h now.

Conflicts:
	include/configs/exynos5250-dt.h

Signed-off-by: Tom Rini <trini@ti.com>
diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h
new file mode 100644
index 0000000..414db42
--- /dev/null
+++ b/include/configs/exynos5-dt.h
@@ -0,0 +1,291 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG EXYNOS5 board.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_SAMSUNG			/* in a SAMSUNG core */
+#define CONFIG_S5P			/* S5P Family */
+#define CONFIG_EXYNOS5			/* which is in a Exynos5 Family */
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_COMMON
+#define CONFIG_ARCH_EARLY_INIT_R
+#define CONFIG_EXYNOS_SPL
+
+/* Enable fdt support for Exynos5250 */
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* Allow tracing to be enabled */
+#define CONFIG_TRACE
+#define CONFIG_CMD_TRACE
+#define CONFIG_TRACE_BUFFER_SIZE	(16 << 20)
+#define CONFIG_TRACE_EARLY_SIZE		(8 << 20)
+#define CONFIG_TRACE_EARLY
+#define CONFIG_TRACE_EARLY_ADDR		0x50000000
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_CACHELINE_SIZE	64
+
+/* Enable ACE acceleration for SHA1 and SHA256 */
+#define CONFIG_EXYNOS_ACE_SHA
+#define CONFIG_SHA_HW_ACCEL
+
+/* input clock of PLL: SMDK5250 has 24MHz input clock */
+#define CONFIG_SYS_CLK_FREQ		24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/* Power Down Modes */
+#define S5P_CHECK_SLEEP			0x00000BAD
+#define S5P_CHECK_DIDLE			0xBAD00000
+#define S5P_CHECK_LPA			0xABAD0000
+
+/* Offset for inform registers */
+#define INFORM0_OFFSET			0x800
+#define INFORM1_OFFSET			0x804
+#define INFORM2_OFFSET			0x808
+#define INFORM3_OFFSET			0x80c
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (4 << 20))
+
+/* select serial console configuration */
+#define CONFIG_BAUDRATE			115200
+#define EXYNOS5_DEFAULT_UART_OFFSET	0x010000
+#define CONFIG_SILENT_CONSOLE
+
+/* Enable keyboard */
+#define CONFIG_CROS_EC		/* CROS_EC protocol */
+#define CONFIG_CROS_EC_SPI		/* Support CROS_EC over SPI */
+#define CONFIG_CROS_EC_I2C		/* Support CROS_EC over I2C */
+#define CONFIG_CROS_EC_KEYB	/* CROS_EC keyboard input */
+#define CONFIG_CMD_CROS_EC
+#define CONFIG_KEYBOARD
+
+/* Console configuration */
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define EXYNOS_DEVICE_SETTINGS \
+		"stdin=serial,cros-ec-keyb\0" \
+		"stdout=serial,lcd\0" \
+		"stderr=serial,lcd\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	EXYNOS_DEVICE_SETTINGS
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_S5P_SDHCI
+#define CONFIG_DWMMC
+#define CONFIG_EXYNOS_DWMMC
+#define CONFIG_SUPPORT_EMMC_BOOT
+#define CONFIG_BOUNCE_BUFFER
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+/* PWM */
+#define CONFIG_PWM
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Command definition*/
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_HASH
+
+#define CONFIG_BOOTDELAY		3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+/* Thermal Management Unit */
+#define CONFIG_EXYNOS_TMU
+#define CONFIG_CMD_DTT
+#define CONFIG_TMU_CMD_DTT
+
+/* TPM */
+#define CONFIG_TPM
+#define CONFIG_CMD_TPM
+#define CONFIG_TPM_TIS_I2C
+#define CONFIG_TPM_TIS_I2C_BUS_NUMBER	3
+#define CONFIG_TPM_TIS_I2C_SLAVE_ADDR	0x20
+
+/* MMC SPL */
+#define CONFIG_SPL
+#define COPY_BL2_FNPTR_ADDR	0x02020030
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+
+/* specific .lds file */
+#define CONFIG_SPL_LDSCRIPT	"board/samsung/common/exynos-uboot-spl.lds"
+#define CONFIG_SPL_MAX_FOOTPRINT	(14 * 1024)
+
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE		384	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5E00000)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
+
+#define CONFIG_RD_LVL
+
+#define CONFIG_NR_DRAM_BANKS	8
+#define SDRAM_BANK_SIZE		(256UL << 20UL)	/* 256 MB */
+#define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE
+#define PHYS_SDRAM_1_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_2		(CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
+#define PHYS_SDRAM_2_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_3		(CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_3_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_4		(CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_4_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_5		(CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_5_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_6		(CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_6_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_7		(CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_7_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_8		(CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_8_SIZE	SDRAM_BANK_SIZE
+
+#define CONFIG_SYS_MONITOR_BASE	0x00000000
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_SYS_MMC_ENV_DEV		0
+
+#define CONFIG_SECURE_BL1_ONLY
+
+/* Secure FW size configuration */
+#ifdef CONFIG_SECURE_BL1_ONLY
+#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */
+#else
+#define CONFIG_SEC_FW_SIZE 0
+#endif
+
+/* Configuration of BL1, BL2, ENV Blocks on mmc */
+#define CONFIG_RES_BLOCK_SIZE	(512)
+#define CONFIG_BL1_SIZE	(16 << 10) /*16 K reserved for BL1*/
+#define CONFIG_BL2_SIZE	(512UL << 10UL) /* 512 KB */
+#define CONFIG_ENV_SIZE	(16 << 10) /* 16 KB */
+
+#define CONFIG_BL1_OFFSET	(CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
+#define CONFIG_BL2_OFFSET	(CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
+#define CONFIG_ENV_OFFSET	(CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE)
+
+/* U-boot copy size from boot Media to DRAM.*/
+#define BL2_START_OFFSET	(CONFIG_BL2_OFFSET/512)
+#define BL2_SIZE_BLOC_COUNT	(CONFIG_BL2_SIZE/512)
+
+#define CONFIG_SPI_BOOTING
+#define EXYNOS_COPY_SPI_FNPTR_ADDR	0x02020058
+#define SPI_FLASH_UBOOT_POS	(CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_PART
+#define CONFIG_PARTITION_UUIDS
+
+/* I2C */
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_SYS_I2C
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C_S3C24X0_SPEED	100000		/* 100 Kbps */
+#define CONFIG_SYS_I2C_S3C24X0
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x0
+#define CONFIG_I2C_EDID
+
+/* SPI */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SPI_FLASH
+#define CONFIG_ENV_SPI_BASE	0x12D30000
+
+#ifdef CONFIG_SPI_FLASH
+#define CONFIG_EXYNOS_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SPI_FLASH_GIGADEVICE
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED		50000000
+#define EXYNOS5_SPI_NUM_CONTROLLERS	5
+#define CONFIG_OF_SPI
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_MODE	SPI_MODE_0
+#define CONFIG_ENV_SECT_SIZE	CONFIG_ENV_SIZE
+#define CONFIG_ENV_SPI_BUS	1
+#define CONFIG_ENV_SPI_MAX_HZ	50000000
+#endif
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+
+/* Ethernet Controllor Driver */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_BASE		0x5000000
+#define CONFIG_SMC911X_16_BIT
+#define CONFIG_ENV_SROM_BANK		1
+#endif /*CONFIG_CMD_NET*/
+
+/* Enable PXE Support */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_CMD_PXE
+#define CONFIG_MENU
+#endif
+
+/* Enable devicetree support */
+#define CONFIG_OF_LIBFDT
+
+/* SHA hashing */
+#define CONFIG_CMD_HASH
+#define CONFIG_HASH_VERIFY
+#define CONFIG_SHA1
+#define CONFIG_SHA256
+
+/* Enable Time Command */
+#define CONFIG_CMD_TIME
+
+#define CONFIG_CMD_BOOTZ
+
+#endif	/* __CONFIG_H */