blob: 1593e2bd4ea33936bc98d8d1afa1b8fe3eb99053 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018 Microchip Technology, Inc.
* Eugen Hristev <eugen.hristev@microchip.com>
*/
#include <common.h>
#include <debug_uart.h>
#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/atmel_pio4.h>
#include <asm/arch/atmel_mpddrc.h>
#include <asm/arch/atmel_sdhci.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
#include <asm/arch/sama5d2.h>
DECLARE_GLOBAL_DATA_PTR;
int board_late_init(void)
{
return 0;
}
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
static void board_uart0_hw_init(void)
{
atmel_pio4_set_c_periph(AT91_PIO_PORTB, 26, ATMEL_PIO_PUEN_MASK); /* URXD0 */
atmel_pio4_set_c_periph(AT91_PIO_PORTB, 27, 0); /* UTXD0 */
at91_periph_clk_enable(ATMEL_ID_UART0);
}
void board_debug_uart_init(void)
{
board_uart0_hw_init();
}
#endif
int board_early_init_f(void)
{
#ifdef CONFIG_DEBUG_UART
debug_uart_init();
#endif
return 0;
}
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);
return 0;
}
#define MAC24AA_MAC_OFFSET 0xfa
int misc_init_r(void)
{
#ifdef CONFIG_I2C_EEPROM
at91_set_ethaddr(MAC24AA_MAC_OFFSET);
#endif
return 0;
}
/* SPL */
#ifdef CONFIG_SPL_BUILD
/* must set PB25 low to enable the CAN transceivers */
static void board_can_stdby_dis(void)
{
atmel_pio4_set_pio_output(AT91_PIO_PORTB, 25, 0);
}
static void board_leds_init(void)
{
atmel_pio4_set_pio_output(AT91_PIO_PORTB, 0, 0); /* RED */
atmel_pio4_set_pio_output(AT91_PIO_PORTB, 1, 1); /* GREEN */
atmel_pio4_set_pio_output(AT91_PIO_PORTA, 31, 0); /* BLUE */
}
/* deassert reset lines for external periph in case of warm reboot */
static void board_reset_additional_periph(void)
{
atmel_pio4_set_pio_output(AT91_PIO_PORTB, 16, 0); /* LAN9252_RST */
atmel_pio4_set_pio_output(AT91_PIO_PORTC, 2, 0); /* HSIC_RST */
atmel_pio4_set_pio_output(AT91_PIO_PORTC, 17, 0); /* USB2534_RST */
atmel_pio4_set_pio_output(AT91_PIO_PORTD, 4, 0); /* KSZ8563_RST */
}
static void board_start_additional_periph(void)
{
atmel_pio4_set_pio_output(AT91_PIO_PORTB, 16, 1); /* LAN9252_RST */
atmel_pio4_set_pio_output(AT91_PIO_PORTC, 2, 1); /* HSIC_RST */
atmel_pio4_set_pio_output(AT91_PIO_PORTC, 17, 1); /* USB2534_RST */
atmel_pio4_set_pio_output(AT91_PIO_PORTD, 4, 1); /* KSZ8563_RST */
}
#ifdef CONFIG_SD_BOOT
void spl_mmc_init(void)
{
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 1, 0); /* CMD */
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 2, 0); /* DAT0 */
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 3, 0); /* DAT1 */
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 4, 0); /* DAT2 */
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 5, 0); /* DAT3 */
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 0, 0); /* CK */
atmel_pio4_set_a_periph(AT91_PIO_PORTA, 13, 0); /* CD */
at91_periph_clk_enable(ATMEL_ID_SDMMC0);
}
#endif
void spl_board_init(void)
{
#ifdef CONFIG_SD_BOOT
spl_mmc_init();
#endif
board_reset_additional_periph();
board_can_stdby_dis();
board_leds_init();
}
void spl_display_print(void)
{
}
void spl_board_prepare_for_boot(void)
{
board_start_additional_periph();
}
static void ddrc_conf(struct atmel_mpddrc_config *ddrc)
{
ddrc->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR3_SDRAM);
ddrc->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
ATMEL_MPDDRC_CR_NR_ROW_14 |
ATMEL_MPDDRC_CR_CAS_DDR_CAS5 |
ATMEL_MPDDRC_CR_DIC_DS |
ATMEL_MPDDRC_CR_NB_8BANKS |
ATMEL_MPDDRC_CR_DECOD_INTERLEAVED |
ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
ddrc->rtr = 0x298;
ddrc->tpr0 = ((6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET) |
(3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET) |
(3 << ATMEL_MPDDRC_TPR0_TWR_OFFSET) |
(9 << ATMEL_MPDDRC_TPR0_TRC_OFFSET) |
(3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET) |
(4 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET) |
(4 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET) |
(4 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET));
ddrc->tpr1 = ((27 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET) |
(29 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET) |
(0 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET) |
(10 << ATMEL_MPDDRC_TPR1_TXP_OFFSET));
ddrc->tpr2 = ((0 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET) |
(0 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET) |
(0 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET) |
(4 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET) |
(7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET));
}
void mem_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
struct atmel_mpddrc_config ddrc_config;
u32 reg;
ddrc_conf(&ddrc_config);
at91_periph_clk_enable(ATMEL_ID_MPDDRC);
writel(AT91_PMC_DDR, &pmc->scer);
reg = readl(&mpddrc->io_calibr);
reg &= ~ATMEL_MPDDRC_IO_CALIBR_RDIV;
reg |= ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_55;
reg &= ~ATMEL_MPDDRC_IO_CALIBR_TZQIO;
reg |= ATMEL_MPDDRC_IO_CALIBR_TZQIO_(100);
writel(reg, &mpddrc->io_calibr);
writel(ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_ONE_CYCLE,
&mpddrc->rd_data_path);
ddr3_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddrc_config);
writel(0x5355, &mpddrc->cal_mr4);
writel(64, &mpddrc->tim_cal);
}
void at91_pmc_init(void)
{
u32 tmp;
/*
* while coming from the ROM code, we run on PLLA @ 492 MHz / 164 MHz
* so we need to slow down and configure MCKR accordingly.
* This is why we have a special flavor of the switching function.
*/
tmp = AT91_PMC_MCKR_PLLADIV_2 |
AT91_PMC_MCKR_MDIV_3 |
AT91_PMC_MCKR_CSS_MAIN;
at91_mck_init_down(tmp);
tmp = AT91_PMC_PLLAR_29 |
AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
AT91_PMC_PLLXR_MUL(82) |
AT91_PMC_PLLXR_DIV(1);
at91_plla_init(tmp);
tmp = AT91_PMC_MCKR_H32MXDIV |
AT91_PMC_MCKR_PLLADIV_2 |
AT91_PMC_MCKR_MDIV_3 |
AT91_PMC_MCKR_CSS_PLLA;
at91_mck_init(tmp);
}
#endif