blob: 9ca648dd44cbcd624d3a39ea3a91b1eb38082a9d [file] [log] [blame]
/*
* Common configuration settings for IGEP technology based boards
*
* (C) Copyright 2012
* ISEE 2007 SL, <www.iseebcn.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __IGEP00X0_H
#define __IGEP00X0_H
#define CONFIG_NR_DRAM_BANKS 2
#define CONFIG_NAND
#include <configs/ti_omap3_common.h>
#include <asm/mach-types.h>
/*
* We are only ever GP parts and will utilize all of the "downloaded image"
* area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
*/
#undef CONFIG_SPL_TEXT_BASE
#define CONFIG_SPL_TEXT_BASE 0x40200000
/*
* Display CPU and Board information
*/
#define CONFIG_DISPLAY_CPUINFO 1
#define CONFIG_DISPLAY_BOARDINFO 1
#define CONFIG_MISC_INIT_R
#define CONFIG_REVISION_TAG 1
/* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
#if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032)
#define CONFIG_STATUS_LED
#define CONFIG_BOARD_SPECIFIC_LED
#define CONFIG_GPIO_LED
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
#define RED_LED_GPIO 27
#elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
#define RED_LED_GPIO 16
#else
#error "status LED not defined for this machine."
#endif
#define RED_LED_DEV 0
#define STATUS_LED_BIT RED_LED_GPIO
#define STATUS_LED_STATE STATUS_LED_ON
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BOOT RED_LED_DEV
#endif
/* GPIO banks */
#define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */
#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
/* USB */
#define CONFIG_USB_MUSB_UDC 1
#define CONFIG_USB_OMAP3 1
#define CONFIG_TWL4030_USB 1
/* USB device configuration */
#define CONFIG_USB_DEVICE 1
#define CONFIG_USB_TTY 1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
/* Change these to suit your needs */
#define CONFIG_USBD_VENDORID 0x0451
#define CONFIG_USBD_PRODUCTID 0x5678
#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
#define CONFIG_USBD_PRODUCT_NAME "IGEP"
#define CONFIG_CMD_MTDPARTS
#define CONFIG_CMD_ONENAND
#ifndef CONFIG_SPL_BUILD
/* Environment */
#define ENV_DEVICE_SETTINGS \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0"
#define MEM_LAYOUT_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
"scriptaddr=0x87E00000\0" \
"pxefile_addr_r=0x87F00000\0"
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0)
#include <config_distro_bootcmd.h>
#define CONFIG_EXTRA_ENV_SETTINGS \
ENV_DEVICE_SETTINGS \
MEM_LAYOUT_SETTINGS \
BOOTENV
#endif
/*
* SMSC911x Ethernet
*/
#if defined(CONFIG_CMD_NET)
#define CONFIG_SMC911X
#define CONFIG_SMC911X_32_BIT
#define CONFIG_SMC911X_BASE 0x2C000000
#endif /* (CONFIG_CMD_NET) */
#define CONFIG_RBTREE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_SYS_MTDPARTS_RUNTIME
/* OneNAND config */
#define CONFIG_USE_ONENAND_BOARD_INIT
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
#define CONFIG_SYS_ONENAND_BLOCK_SIZE (128*1024)
/* NAND config */
#define CONFIG_SPL_OMAP3_ID_NAND
#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
26, 27, 28, 29, 30, 31, 32, 33, \
34, 35, 36, 37, 38, 39, 40, 41, \
42, 43, 44, 45, 46, 47, 48, 49, \
50, 51, 52, 53, 54, 55, 56, 57, }
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_BCH
/* UBI configuration */
#define CONFIG_SPL_UBI 1
#define CONFIG_SPL_UBI_MAX_VOL_LEBS 256
#define CONFIG_SPL_UBI_MAX_PEB_SIZE (256*1024)
#define CONFIG_SPL_UBI_MAX_PEBS 4096
#define CONFIG_SPL_UBI_VOL_IDS 8
#define CONFIG_SPL_UBI_LOAD_MONITOR_ID 0
#define CONFIG_SPL_UBI_LOAD_KERNEL_ID 3
#define CONFIG_SPL_UBI_LOAD_ARGS_ID 4
#define CONFIG_SPL_UBI_PEB_OFFSET 4
#define CONFIG_SPL_UBI_VID_OFFSET 512
#define CONFIG_SPL_UBI_LEB_START 2048
#define CONFIG_SPL_UBI_INFO_ADDR 0x88080000
/* environment organization */
#define CONFIG_ENV_IS_IN_UBI 1
#define CONFIG_ENV_UBI_PART "UBI"
#define CONFIG_ENV_UBI_VOLUME "config"
#define CONFIG_ENV_UBI_VOLUME_REDUND "config_r"
#define CONFIG_UBI_SILENCE_MSG 1
#define CONFIG_UBIFS_SILENCE_MSG 1
#define CONFIG_ENV_SIZE (32*1024)
#endif /* __IGEP00X0_H */