blob: ab471afb977b6cf937ff71a9dab3cc69ae235afa [file] [log] [blame]
/*
* Copyright 2008 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* Version 2 as published by the Free Software Foundation.
*/
#include <common.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_ddr_dimm_params.h>
typedef struct {
u32 datarate_mhz_low;
u32 datarate_mhz_high;
u32 n_ranks;
u32 clk_adjust;
u32 cpo;
u32 write_data_delay;
u32 force_2T;
} board_specific_parameters_t;
/*
* CPO value doesn't matter if workaround for errata 111 and 134 enabled.
*
* For DDR2 DIMM, all combinations of clk_adjust and write_data_delay have been
* tested. For RDIMM, clk_adjust = 4 and write_data_delay = 3 is optimized for
* all clocks from 400MT/s to 800MT/s, verified with Kingston KVR800D2D8P6/2G.
* For UDIMM, clk_adjust = 8 and write_delay = 5 is optimized for all clocks
* from 400MT/s to 800MT/s, verified with Micron MT18HTF25672AY-800E1.
*/
const board_specific_parameters_t board_specific_parameters_udimm[][20] = {
{
/*
* memory controller 0
* lo| hi| num| clk| cpo|wrdata|2T
* mhz| mhz|ranks|adjst| | delay|
*/
{ 0, 333, 2, 8, 7, 5, 0},
{334, 400, 2, 8, 9, 5, 0},
{401, 549, 2, 8, 11, 5, 0},
{550, 680, 2, 8, 10, 5, 0},
{681, 850, 2, 8, 12, 5, 1},
{ 0, 333, 1, 6, 7, 3, 0},
{334, 400, 1, 6, 9, 3, 0},
{401, 549, 1, 6, 11, 3, 0},
{550, 680, 1, 1, 10, 5, 0},
{681, 850, 1, 1, 12, 5, 0}
},
{
/*
* memory controller 1
* lo| hi| num| clk| cpo|wrdata|2T
* mhz| mhz|ranks|adjst| | delay|
*/
{ 0, 333, 2, 8, 7, 5, 0},
{334, 400, 2, 8, 9, 5, 0},
{401, 549, 2, 8, 11, 5, 0},
{550, 680, 2, 8, 11, 5, 0},
{681, 850, 2, 8, 13, 5, 1},
{ 0, 333, 1, 6, 7, 3, 0},
{334, 400, 1, 6, 9, 3, 0},
{401, 549, 1, 6, 11, 3, 0},
{550, 680, 1, 1, 11, 6, 0},
{681, 850, 1, 1, 13, 6, 0}
}
};
const board_specific_parameters_t board_specific_parameters_rdimm[][20] = {
{
/*
* memory controller 0
* lo| hi| num| clk| cpo|wrdata|2T
* mhz| mhz|ranks|adjst| | delay|
*/
{ 0, 333, 2, 4, 7, 3, 0},
{334, 400, 2, 4, 9, 3, 0},
{401, 549, 2, 4, 11, 3, 0},
{550, 680, 2, 4, 10, 3, 0},
{681, 850, 2, 4, 12, 3, 1},
},
{
/*
* memory controller 1
* lo| hi| num| clk| cpo|wrdata|2T
* mhz| mhz|ranks|adjst| | delay|
*/
{ 0, 333, 2, 4, 7, 3, 0},
{334, 400, 2, 4, 9, 3, 0},
{401, 549, 2, 4, 11, 3, 0},
{550, 680, 2, 4, 11, 3, 0},
{681, 850, 2, 4, 13, 3, 1},
}
};
void fsl_ddr_board_options(memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int ctrl_num)
{
const board_specific_parameters_t *pbsp;
u32 num_params;
u32 i;
ulong ddr_freq;
int matched = 0;
if (!pdimm->n_ranks)
return;
if (popts->registered_dimm_en) {
pbsp = &(board_specific_parameters_rdimm[ctrl_num][0]);
num_params = sizeof(board_specific_parameters_rdimm[ctrl_num]) /
sizeof(board_specific_parameters_rdimm[0][0]);
} else {
pbsp = &(board_specific_parameters_udimm[ctrl_num][0]);
num_params = sizeof(board_specific_parameters_udimm[ctrl_num]) /
sizeof(board_specific_parameters_udimm[0][0]);
}
/* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
* that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
* there are two dimms in the controller, set odt_rd_cfg to 3 and
* odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
*/
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
if (i&1) { /* odd CS */
popts->cs_local_opts[i].odt_rd_cfg = 0;
popts->cs_local_opts[i].odt_wr_cfg = 0;
} else { /* even CS */
if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) {
popts->cs_local_opts[i].odt_rd_cfg = 0;
popts->cs_local_opts[i].odt_wr_cfg = 4;
} else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
popts->cs_local_opts[i].odt_rd_cfg = 3;
popts->cs_local_opts[i].odt_wr_cfg = 3;
}
}
}
/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
* freqency and n_banks specified in board_specific_parameters table.
*/
ddr_freq = get_ddr_freq(0) / 1000000;
for (i = 0; i < num_params; i++) {
if (ddr_freq >= pbsp->datarate_mhz_low &&
ddr_freq <= pbsp->datarate_mhz_high &&
pdimm->n_ranks == pbsp->n_ranks) {
popts->clk_adjust = pbsp->clk_adjust;
popts->cpo_override = pbsp->cpo;
popts->write_data_delay = pbsp->write_data_delay;
popts->twoT_en = pbsp->force_2T;
matched = 1;
break;
}
pbsp++;
}
if (!matched)
printf("Warning: board specific timing not found!\n");
/*
* Factors to consider for half-strength driver enable:
* - number of DIMMs installed
*/
popts->half_strength_driver_enable = 0;
}