blob: d28da54ed6595403964a0079e4d9972d3a84a1eb [file] [log] [blame]
menu "Command line interface"
config CMDLINE
bool "Support U-Boot commands"
default y
help
Enable U-Boot's command-line functions. This provides a means
to enter commands into U-Boot for a wide variety of purposes. It
also allows scripts (containing commands) to be executed.
Various commands and command categorys can be indivdually enabled.
Depending on the number of commands enabled, this can add
substantially to the size of U-Boot.
config HUSH_PARSER
bool "Use hush shell"
depends on CMDLINE
help
This option enables the "hush" shell (from Busybox) as command line
interpreter, thus enabling powerful command line syntax like
if...then...else...fi conditionals or `&&' and '||'
constructs ("shell scripts").
If disabled, you get the old, much simpler behaviour with a somewhat
smaller memory footprint.
config SYS_PROMPT
string "Shell prompt"
default "=> "
help
This string is displayed in the command line to the left of the
cursor.
menu "Autoboot options"
config AUTOBOOT
bool "Autoboot"
default y
help
This enables the autoboot. See doc/README.autoboot for detail.
config AUTOBOOT_KEYED
bool "Stop autobooting via specific input key / string"
default n
help
This option enables stopping (aborting) of the automatic
boot feature only by issuing a specific input key or
string. If not enabled, any input key will abort the
U-Boot automatic booting process and bring the device
to the U-Boot prompt for user input.
config AUTOBOOT_PROMPT
string "Autoboot stop prompt"
depends on AUTOBOOT_KEYED
default "Autoboot in %d seconds\\n"
help
This string is displayed before the boot delay selected by
CONFIG_BOOTDELAY starts. If it is not defined there is no
output indicating that autoboot is in progress.
Note that this define is used as the (only) argument to a
printf() call, so it may contain '%' format specifications,
provided that it also includes, sepearated by commas exactly
like in a printf statement, the required arguments. It is
the responsibility of the user to select only such arguments
that are valid in the given context.
config AUTOBOOT_ENCRYPTION
bool "Enable encryption in autoboot stopping"
depends on AUTOBOOT_KEYED
default n
config AUTOBOOT_DELAY_STR
string "Delay autobooting via specific input key / string"
depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
help
This option delays the automatic boot feature by issuing
a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR
or the environment variable "bootdelaykey" is specified
and this string is received from console input before
autoboot starts booting, U-Boot gives a command prompt. The
U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is
used, otherwise it never times out.
config AUTOBOOT_STOP_STR
string "Stop autobooting via specific input key / string"
depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
help
This option enables stopping (aborting) of the automatic
boot feature only by issuing a specific input key or
string. If CONFIG_AUTOBOOT_STOP_STR or the environment
variable "bootstopkey" is specified and this string is
received from console input before autoboot starts booting,
U-Boot gives a command prompt. The U-Boot prompt never
times out, even if CONFIG_BOOT_RETRY_TIME is used.
config AUTOBOOT_KEYED_CTRLC
bool "Enable Ctrl-C autoboot interruption"
depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
default n
help
This option allows for the boot sequence to be interrupted
by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey".
Setting this variable provides an escape sequence from the
limited "password" strings.
config AUTOBOOT_STOP_STR_SHA256
string "Stop autobooting via SHA256 encrypted password"
depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION
help
This option adds the feature to only stop the autobooting,
and therefore boot into the U-Boot prompt, when the input
string / password matches a values that is encypted via
a SHA256 hash and saved in the environment.
endmenu
source "cmd/fastboot/Kconfig"
comment "Commands"
menu "Info commands"
config CMD_BDI
bool "bdinfo"
default y
help
Print board info
config CMD_CONSOLE
bool "coninfo"
default y
help
Print console devices and information.
config CMD_CPU
bool "cpu"
help
Print information about available CPUs. This normally shows the
number of CPUs, type (e.g. manufacturer, architecture, product or
internal name) and clock frequency. Other information may be
available depending on the CPU driver.
config CMD_LICENSE
bool "license"
help
Print GPL license text
endmenu
menu "Boot commands"
config CMD_BOOTD
bool "bootd"
default y
help
Run the command stored in the environment "bootcmd", i.e.
"bootd" does the same thing as "run bootcmd".
config CMD_BOOTM
bool "bootm"
default y
help
Boot an application image from the memory.
config CMD_BOOTZ
bool "bootz"
help
Boot the Linux zImage
config CMD_BOOTI
bool "booti"
depends on ARM64
default y
help
Boot an AArch64 Linux Kernel image from memory.
config CMD_BOOTEFI
bool "bootefi"
depends on EFI_LOADER
default y
help
Boot an EFI image from memory.
config CMD_ELF
bool "bootelf, bootvx"
default y
help
Boot an ELF/vxWorks image from the memory.
config CMD_FDT
bool "Flattened Device Tree utility commands"
default y
depends on OF_LIBFDT
help
Do FDT related setup before booting into the Operating System.
config CMD_GO
bool "go"
default y
help
Start an application at a given address.
config CMD_RUN
bool "run"
default y
help
Run the command in the given environment variable.
config CMD_IMI
bool "iminfo"
default y
help
Print header information for application image.
config CMD_IMLS
bool "imls"
default y
help
List all images found in flash
config CMD_XIMG
bool "imxtract"
default y
help
Extract a part of a multi-image.
config CMD_POWEROFF
bool
endmenu
menu "Environment commands"
config CMD_ASKENV
bool "ask for env variable"
help
Ask for environment variable
config CMD_EXPORTENV
bool "env export"
default y
help
Export environments.
config CMD_IMPORTENV
bool "env import"
default y
help
Import environments.
config CMD_EDITENV
bool "editenv"
default y
help
Edit environment variable.
config CMD_GREPENV
bool "search env"
help
Allow for searching environment variables
config CMD_SAVEENV
bool "saveenv"
default y
help
Save all environment variables into the compiled-in persistent
storage.
config CMD_ENV_EXISTS
bool "env exists"
default y
help
Check if a variable is defined in the environment for use in
shell scripting.
endmenu
menu "Memory commands"
config CMD_MEMORY
bool "md, mm, nm, mw, cp, cmp, base, loop"
default y
help
Memeory commands.
md - memory display
mm - memory modify (auto-incrementing address)
nm - memory modify (constant address)
mw - memory write (fill)
cp - memory copy
cmp - memory compare
base - print or set address offset
loop - initinite loop on address range
config CMD_CRC32
bool "crc32"
default y
help
Compute CRC32.
config LOOPW
bool "loopw"
help
Infinite write loop on address range
config CMD_MEMTEST
bool "memtest"
help
Simple RAM read/write test.
config CMD_MX_CYCLIC
bool "mdc, mwc"
help
mdc - memory display cyclic
mwc - memory write cyclic
config CMD_MEMINFO
bool "meminfo"
help
Display memory information.
endmenu
menu "Device access commands"
config CMD_DM
bool "dm - Access to driver model information"
depends on DM
default y
help
Provides access to driver model data structures and information,
such as a list of devices, list of uclasses and the state of each
device (e.g. activated). This is not required for operation, but
can be useful to see the state of driver model for debugging or
interest.
config CMD_DEMO
bool "demo - Demonstration commands for driver model"
depends on DM
help
Provides a 'demo' command which can be used to play around with
driver model. To use this properly you will need to enable one or
both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
Otherwise you will always get an empty list of devices. The demo
devices are defined in the sandbox device tree, so the easiest
option is to use sandbox and pass the -d point to sandbox's
u-boot.dtb file.
config CMD_LOADB
bool "loadb"
default y
help
Load a binary file over serial line.
config CMD_LOADS
bool "loads"
default y
help
Load an S-Record file over serial line
config CMD_FLASH
bool "flinfo, erase, protect"
default y
help
NOR flash support.
flinfo - print FLASH memory information
erase - FLASH memory
protect - enable or disable FLASH write protection
config CMD_ARMFLASH
#depends on FLASH_CFI_DRIVER
bool "armflash"
help
ARM Ltd reference designs flash partition access
config CMD_MMC
bool "mmc"
help
MMC memory mapped support.
config CMD_NAND
bool "nand"
help
NAND support.
config CMD_SF
bool "sf"
help
SPI Flash support
config CMD_SPI
bool "sspi"
help
SPI utility command.
config CMD_I2C
bool "i2c"
help
I2C support.
config CMD_USB
bool "usb"
help
USB support.
config CMD_DFU
bool "dfu"
help
Enables the command "dfu" which is used to have U-Boot create a DFU
class device via USB.
config CMD_USB_MASS_STORAGE
bool "UMS usb mass storage"
help
USB mass storage support
config CMD_FPGA
bool "fpga"
default y
help
FPGA support.
config CMD_REMOTEPROC
bool "remoteproc"
depends on REMOTEPROC
help
Support for Remote Processor control
config CMD_GPIO
bool "gpio"
help
GPIO support.
endmenu
menu "Shell scripting commands"
config CMD_ECHO
bool "echo"
default y
help
Echo args to console
config CMD_ITEST
bool "itest"
default y
help
Return true/false on integer compare.
config CMD_SOURCE
bool "source"
default y
help
Run script from memory
config CMD_SETEXPR
bool "setexpr"
default y
help
Evaluate boolean and math expressions and store the result in an env
variable.
Also supports loading the value at a memory location into a variable.
If CONFIG_REGEX is enabled, setexpr also supports a gsub function.
endmenu
menu "Network commands"
config CMD_NET
bool "bootp, tftpboot"
select NET
default y
help
Network commands.
bootp - boot image via network using BOOTP/TFTP protocol
tftpboot - boot image via network using TFTP protocol
config CMD_TFTPPUT
bool "tftp put"
help
TFTP put command, for uploading files to a server
config CMD_TFTPSRV
bool "tftpsrv"
help
Act as a TFTP server and boot the first received file
config CMD_RARP
bool "rarpboot"
help
Boot image via network using RARP/TFTP protocol
config CMD_DHCP
bool "dhcp"
help
Boot image via network using DHCP/TFTP protocol
config CMD_NFS
bool "nfs"
default y
help
Boot image via network using NFS protocol.
config CMD_MII
bool "mii"
help
Enable MII utility commands.
config CMD_PING
bool "ping"
help
Send ICMP ECHO_REQUEST to network host
config CMD_CDP
bool "cdp"
help
Perform CDP network configuration
config CMD_SNTP
bool "sntp"
help
Synchronize RTC via network
config CMD_DNS
bool "dns"
help
Lookup the IP of a hostname
config CMD_LINK_LOCAL
bool "linklocal"
help
Acquire a network IP address using the link-local protocol
endmenu
menu "Misc commands"
config CMD_AMBAPP
bool "ambapp"
depends on LEON3
default y
help
Lists AMBA Plug-n-Play information.
config SYS_AMBAPP_PRINT_ON_STARTUP
bool "Show AMBA PnP info on startup"
depends on CMD_AMBAPP
default n
help
Show AMBA Plug-n-Play information on startup.
config CMD_BLOCK_CACHE
bool "blkcache - control and stats for block cache"
depends on BLOCK_CACHE
default y if BLOCK_CACHE
help
Enable the blkcache command, which can be used to control the
operation of the cache functions.
This is most useful when fine-tuning the operation of the cache
during development, but also allows the cache to be disabled when
it might hurt performance (e.g. when using the ums command).
config CMD_CACHE
bool "icache or dcache"
help
Enable the "icache" and "dcache" commands
config CMD_TIME
bool "time"
help
Run commands and summarize execution time.
# TODO: rename to CMD_SLEEP
config CMD_MISC
bool "sleep"
default y
help
Delay execution for some time
config CMD_TIMER
bool "timer"
help
Access the system timer.
config CMD_SETGETDCR
bool "getdcr, setdcr, getidcr, setidcr"
depends on 4xx
default y
help
getdcr - Get an AMCC PPC 4xx DCR's value
setdcr - Set an AMCC PPC 4xx DCR's value
getidcr - Get a register value via indirect DCR addressing
setidcr - Set a register value via indirect DCR addressing
config CMD_SOUND
bool "sound"
depends on SOUND
help
This provides basic access to the U-Boot's sound support. The main
feature is to play a beep.
sound init - set up sound system
sound play - play a sound
config CMD_QFW
bool "qfw"
select QFW
help
This provides access to the QEMU firmware interface. The main
feature is to allow easy loading of files passed to qemu-system
via -kernel / -initrd
endmenu
config CMD_BOOTSTAGE
bool "Enable the 'bootstage' command"
depends on BOOTSTAGE
help
Add a 'bootstage' command which supports printing a report
and un/stashing of bootstage data.
menu "Power commands"
config CMD_PMIC
bool "Enable Driver Model PMIC command"
depends on DM_PMIC
help
This is the pmic command, based on a driver model pmic's API.
Command features are unchanged:
- list - list pmic devices
- pmic dev <id> - show or [set] operating pmic device (NEW)
- pmic dump - dump registers
- pmic read address - read byte of register at address
- pmic write address - write byte to register at address
The only one change for this command is 'dev' subcommand.
config CMD_REGULATOR
bool "Enable Driver Model REGULATOR command"
depends on DM_REGULATOR
help
This command is based on driver model regulator's API.
User interface features:
- list - list regulator devices
- regulator dev <id> - show or [set] operating regulator device
- regulator info - print constraints info
- regulator status - print operating status
- regulator value <val] <-f> - print/[set] voltage value [uV]
- regulator current <val> - print/[set] current value [uA]
- regulator mode <id> - print/[set] operating mode id
- regulator enable - enable the regulator output
- regulator disable - disable the regulator output
The '-f' (force) option can be used for set the value which exceeds
the limits, which are found in device-tree and are kept in regulator's
uclass platdata structure.
endmenu
menu "Security commands"
config CMD_TPM
bool "Enable the 'tpm' command"
depends on TPM
help
This provides a means to talk to a TPM from the command line. A wide
range of commands if provided - see 'tpm help' for details. The
command requires a suitable TPM on your board and the correct driver
must be enabled.
config CMD_TPM_TEST
bool "Enable the 'tpm test' command"
depends on CMD_TPM
help
This provides a a series of tests to confirm that the TPM is working
correctly. The tests cover initialisation, non-volatile RAM, extend,
global lock and checking that timing is within expectations. The
tests pass correctly on Infineon TPMs but may need to be adjusted
for other devices.
endmenu
menu "Filesystem commands"
config CMD_EXT2
bool "ext2 command support"
help
Enables EXT2 FS command
config CMD_EXT4
bool "ext4 command support"
help
Enables EXT4 FS command
config CMD_EXT4_WRITE
depends on CMD_EXT4
bool "ext4 write command support"
help
Enables EXT4 FS write command
config CMD_FAT
bool "FAT command support"
help
Support for the FAT fs
config CMD_FS_GENERIC
bool "filesystem commands"
help
Enables filesystem commands (e.g. load, ls) that work for multiple
fs types.
endmenu
endmenu