blob: 5545cf0f10f44fe6a5d68671c075a64419e317f0 [file] [log] [blame]
/*
* am335x_evm.h
*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __CONFIG_BALTOS_H
#define __CONFIG_BALTOS_H
#include <linux/sizes.h>
#include <configs/ti_am335x_common.h>
#define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */
#define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM
#define CONFIG_BOARD_LATE_INIT
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
/* Custom script for NOR */
#define CONFIG_SYS_LDSCRIPT "board/vscom/baltos/u-boot.lds"
/* Always 128 KiB env size */
#define CONFIG_ENV_SIZE (128 << 10)
/* Enhance our eMMC support / experience. */
#define CONFIG_CMD_GPT
#define CONFIG_EFI_PARTITION
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART
/* FIT support */
#define CONFIG_SYS_BOOTM_LEN SZ_64M
#define CONFIG_OF_BOARD_SETUP
/* UBI Support */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
/* I2C configuration */
#undef CONFIG_SYS_OMAP24_I2C_SPEED
#define CONFIG_SYS_OMAP24_I2C_SPEED 1000
#undef CONFIG_SPL_OS_BOOT
#ifdef CONFIG_NAND
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00080000
#ifdef CONFIG_SPL_OS_BOOT
#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
#endif
#define NANDARGS \
"mtdids=" MTDIDS_DEFAULT "\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"nandargs=setenv bootargs console=${console} " \
"${optargs} " \
"${mtdparts} " \
"root=${nandroot} " \
"rootfstype=${nandrootfstype}\0" \
"nandroot=ubi0:rootfs rw ubi.mtd=5\0" \
"nandrootfstype=ubifs rootwait=1\0" \
"nandboot=echo Booting from nand ...; " \
"run nandargs; " \
"setenv loadaddr 0x84000000; " \
"ubi part UBI; " \
"ubifsmount ubi0:kernel; " \
"ubifsload $loadaddr kernel-fit.itb;" \
"ubifsumount; " \
"bootm ${loadaddr}#conf${board_name}; " \
"if test $? -ne 0; then echo Using default FIT config; " \
"bootm ${loadaddr}; fi;\0"
#else
#define NANDARGS ""
#endif
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
"boot_fdt=try\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"bootfile=zImage\0" \
"fdtfile=undefined\0" \
"console=ttyO0,115200n8\0" \
"partitions=" \
"uuid_disk=${uuid_gpt_disk};" \
"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
"optargs=\0" \
"mmcdev=0\0" \
"mmcroot=/dev/mmcblk0p2 ro\0" \
"mmcrootfstype=ext4 rootwait\0" \
"rootpath=/export/rootfs\0" \
"nfsopts=nolock\0" \
"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
"::off\0" \
"ramroot=/dev/ram0 rw\0" \
"ramrootfstype=ext2\0" \
"mmcargs=setenv bootargs console=${console} " \
"${optargs} " \
"${mtdparts} " \
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
"spiroot=/dev/mtdblock4 rw\0" \
"spirootfstype=jffs2\0" \
"spisrcaddr=0xe0000\0" \
"spiimgsize=0x362000\0" \
"spibusno=0\0" \
"spiargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=${spiroot} " \
"rootfstype=${spirootfstype}\0" \
"netargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=/dev/nfs " \
"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
"ip=dhcp\0" \
"bootenv=uEnv.txt\0" \
"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
"importbootenv=echo Importing environment from mmc ...; " \
"env import -t $loadaddr $filesize\0" \
"ramargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=${ramroot} " \
"rootfstype=${ramrootfstype}\0" \
"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
"mmcloados=run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
"bootz ${loadaddr} - ${fdtaddr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
"bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
"bootz; " \
"fi;\0" \
"mmcboot=mmc dev ${mmcdev}; " \
"if mmc rescan; then " \
"echo SD/MMC found on device ${mmcdev};" \
"if run loadbootenv; then " \
"echo Loaded environment from ${bootenv};" \
"run importbootenv;" \
"fi;" \
"if test -n $uenvcmd; then " \
"echo Running uenvcmd ...;" \
"run uenvcmd;" \
"fi;" \
"if run loadimage; then " \
"run mmcloados;" \
"fi;" \
"fi;\0" \
"spiboot=echo Booting from spi ...; " \
"run spiargs; " \
"sf probe ${spibusno}:0; " \
"sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
"bootz ${loadaddr}\0" \
"netboot=echo Booting from network ...; " \
"setenv autoload no; " \
"dhcp; " \
"tftp ${loadaddr} ${bootfile}; " \
"tftp ${fdtaddr} ${fdtfile}; " \
"run netargs; " \
"bootz ${loadaddr} - ${fdtaddr}\0" \
"ramboot=echo Booting from ramdisk ...; " \
"run ramargs; " \
"bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
"findfdt=setenv fdtfile am335x-baltos.dtb\0" \
NANDARGS
/*DFUARGS*/
#endif
#define CONFIG_BOOTCOMMAND \
"run findfdt; " \
"run mmcboot;" \
"setenv mmcdev 1; " \
"setenv bootpart 1:2; " \
"run mmcboot;" \
"run nandboot;"
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
#define CONFIG_BAUDRATE 115200
#define CONFIG_CMD_EEPROM
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_I2C_MULTI_EEPROMS
/* PMIC support */
#define CONFIG_POWER_TPS65910
/* SPL */
#ifndef CONFIG_NOR_BOOT
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_YMODEM_SUPPORT
/* Bootcount using the RTC block */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_BOOTCOUNT_AM33XX
/* USB gadget RNDIS */
/*#define CONFIG_SPL_MUSB_NEW_SUPPORT*/
/* General network SPL, both CPSW and USB gadget RNDIS */
/*#define CONFIG_SPL_NET_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"*/
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
#ifdef CONFIG_NAND
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_NAND_OMAP_GPMC_PREFETCH
#define CONFIG_NAND_OMAP_ELM
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
CONFIG_SYS_NAND_PAGE_SIZE)
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
26, 27, 28, 29, 30, 31, 32, 33, \
34, 35, 36, 37, 38, 39, 40, 41, \
42, 43, 44, 45, 46, 47, 48, 49, \
50, 51, 52, 53, 54, 55, 56, 57, }
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#endif
#endif
/*
* USB configuration. We enable MUSB support, both for host and for
* gadget. We set USB0 as peripheral and USB1 as host, based on the
* board schematic and physical port wired to each. Then for host we
* add mass storage support and for gadget we add both RNDIS ethernet
* and DFU.
*/
#define CONFIG_USB_MUSB_DSPS
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_USB_MUSB_GADGET
#define CONFIG_USB_MUSB_PIO_ONLY
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
#define CONFIG_USB_GADGET
#define CONFIG_USBDOWNLOAD_GADGET
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_VBUS_DRAW 2
#define CONFIG_USB_MUSB_HOST
#define CONFIG_AM335X_USB0
#define CONFIG_AM335X_USB0_MODE MUSB_HOST
#define CONFIG_AM335X_USB1
#define CONFIG_AM335X_USB1_MODE MUSB_OTG
#ifdef CONFIG_USB_MUSB_HOST
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#endif
#ifdef CONFIG_USB_MUSB_GADGET
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
/* USB TI's IDs */
#define CONFIG_G_DNL_VENDOR_NUM 0x0403
#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
#endif /* CONFIG_USB_MUSB_GADGET */
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
/* disable host part of MUSB in SPL */
#undef CONFIG_USB_MUSB_HOST
/* disable EFI partitions and partition UUID support */
#undef CONFIG_PARTITION_UUIDS
#undef CONFIG_EFI_PARTITION
/*
* Disable CPSW SPL support so we fit within the 101KiB limit.
*/
#undef CONFIG_SPL_ETH_SUPPORT
#endif
/* Network. */
#define CONFIG_PHY_GIGE
#define CONFIG_PHYLIB
#define CONFIG_PHY_ADDR 0
#define CONFIG_PHY_SMSC
#define CONFIG_MII
#define CONFIG_CMD_MII
#define CONFIG_PHY_ATHEROS
/* NAND support */
#ifdef CONFIG_NAND
#define CONFIG_CMD_NAND
#define GPMC_NAND_ECC_LP_x8_LAYOUT 1
#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \
"128k(SPL.backup1)," \
"128k(SPL.backup2)," \
"128k(SPL.backup3)," \
"1920k(u-boot)," \
"-(UBI)"
#define CONFIG_ENV_IS_NOWHERE
#endif
#endif
#endif /* ! __CONFIG_BALTOS_H */