* Add start-up delay to make sure power has stabilized before
attempting to switch on USB on SX1 board.
* Patch by Josef Wagner, 18 Mar 2004:
- Add support for MicroSys XM250 board (PXA255)
- Add support for MicroSys PM828 board (MPC8280)
- Add support for 32 MB Flash on PM825/826
- new SDRAM refresh rate for PM825/PM826
- added support for MicroSys PM520 (MPC5200)
- replaced Query by Identify command in CPU86/flash.c
to support 28F160F3B
* Fix wrap around problem with udelay() on ARM920T
* Add support for Macronix flash on TRAB board
diff --git a/Makefile b/Makefile
index bb97631..684637e 100644
--- a/Makefile
+++ b/Makefile
@@ -244,6 +244,9 @@
@ echo "#define CONFIG_$(@:_config=) 1" >include/config.h
@./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk
+PM520_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc5xxx pm520
+
#########################################################################
## MPC8xx Systems
#########################################################################
@@ -652,7 +655,7 @@
#########################################################################
## MPC824x Systems
#########################################################################
-xtract_82xx = $(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))
+xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
A3000_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x a3000
@@ -747,32 +750,56 @@
MPC8266ADS_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 mpc8266ads
+# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash
PM825_config \
-PM825_ROMBOOT_config: unconfig
- @echo "#define CONFIG_PCI" >include/config.h
- @./mkconfig -a PM826 ppc mpc8260 pm826
- @cd ./include ; \
- if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
- echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
- echo "... booting from 8-bit flash" ; \
- else \
- echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
- echo "... booting from 64-bit flash" ; \
- fi; \
- echo "export CONFIG_BOOT_ROM" >> config.mk; \
-
+PM825_ROMBOOT_config \
+PM825_BIGFLASH_config \
+PM825_ROMBOOT_BIGFLASH_config \
PM826_config \
-PM826_ROMBOOT_config: unconfig
- @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 pm826
- @cd ./include ; \
- if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
- echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
- echo "... booting from 8-bit flash" ; \
+PM826_ROMBOOT_config \
+PM826_BIGFLASH_config \
+PM826_ROMBOOT_BIGFLASH_config: unconfig
+ @if [ "$(findstring PM825_,$@)" ] ; then \
+ echo "#define CONFIG_PCI" >include/config.h ; \
else \
- echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
+ >include/config.h ; \
+ fi
+ @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
+ echo "... booting from 8-bit flash" ; \
+ echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
+ echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \
+ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
+ echo "... with 32 MB Flash" ; \
+ echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \
+ fi; \
+ else \
echo "... booting from 64-bit flash" ; \
- fi; \
- echo "export CONFIG_BOOT_ROM" >> config.mk; \
+ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
+ echo "... with 32 MB Flash" ; \
+ echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \
+ echo "TEXT_BASE = 0x40000000" >board/pm826/config.tmp ; \
+ else \
+ echo "TEXT_BASE = 0xFF000000" >board/pm826/config.tmp ; \
+ fi; \
+ fi
+ @./mkconfig -a PM826 ppc mpc8260 pm826
+
+PM828_config \
+PM828_PCI_config \
+PM828_ROMBOOT_config \
+PM828_ROMBOOT_PCI_config: unconfig
+ @if [ -z "$(findstring _PCI_,$@)" ] ; then \
+ echo "#define CONFIG_PCI" >>include/config.h ; \
+ echo "... with PCI enabled" ; \
+ else \
+ >include/config.h ; \
+ fi
+ @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
+ echo "... booting from 8-bit flash" ; \
+ echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
+ echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \
+ fi
+ @./mkconfig -a PM828 ppc mpc8260 pm828
ppmc8260_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 ppmc8260
@@ -1042,6 +1069,9 @@
wepep250_config : unconfig
@./mkconfig $(@:_config=) arm pxa wepep250
+xm250_config : unconfig
+ @./mkconfig $(@:_config=) arm pxa xm250
+
#========================================================================
# i386
#========================================================================