Tegra30: Add/enable Cardhu build (T30 reference board)
This build is stripped down. It boots to the command prompt.
GPIO is the only peripheral supported. Others TBD.
include/configs/tegra-common.h now holds common config options
for Tegra SoCs.
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index fe07f72..33e5f52 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -21,80 +21,81 @@
* MA 02111-1307 USA
*/
-#ifndef __TEGRA20_COMMON_H
-#define __TEGRA20_COMMON_H
-#include <asm/sizes.h>
-#include <linux/stringify.h>
+#ifndef _TEGRA20_COMMON_H_
+#define _TEGRA20_COMMON_H_
+#include "tegra-common.h"
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMCORTEXA9 /* This is an ARM V7 CPU core */
-#define CONFIG_TEGRA20 /* in a NVidia Tegra20 core */
-#define CONFIG_TEGRA /* which is a Tegra generic machine */
-#define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */
+#define CONFIG_TEGRA20 /* in a NVidia Tegra20 core */
-#define CONFIG_SYS_CACHELINE_SIZE 32
+/* Environment information, boards can override if required */
+#define CONFIG_LOADADDR 0x00408000 /* def. location for kernel */
-#include <asm/arch/tegra.h> /* get chip and board defs */
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LOAD_ADDR 0x00A00800 /* default */
+#define CONFIG_STACKBASE 0x02800000 /* 40MB */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_SYS_TEXT_BASE 0x0010E000
+
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ * else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ * decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ * should not overlap that area, or the kernel will have to copy itself
+ * somewhere else before decompression. Similarly, the address of any other
+ * data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ * this up to 16M allows for a sizable kernel to be decompressed below the
+ * compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ * the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ * for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define MEM_LAYOUT_ENV_SETTINGS \
+ "scriptaddr=0x10000000\0" \
+ "kernel_addr_r=0x01000000\0" \
+ "fdt_addr_r=0x02000000\0" \
+ "ramdisk_addr_r=0x02100000\0"
+
+/* Defines for SPL */
+#define CONFIG_SPL_TEXT_BASE 0x00108000
+#define CONFIG_SYS_SPL_MALLOC_START 0x00090000
+#define CONFIG_SPL_STACK 0x000ffffc
+
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds"
/* Align LCD to 1MB boundary */
#define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_OF_LIBFDT /* enable passing of devicetree */
-
#ifdef CONFIG_TEGRA_LP0
#define TEGRA_LP0_ADDR 0x1C406000
#define TEGRA_LP0_SIZE 0x2000
#define TEGRA_LP0_VEC \
- "lp0_vec=" __stringify(TEGRA_LP0_SIZE) \
+ "lp0_vec=" __stringify(TEGRA_LP0_SIZE) \
"@" __stringify(TEGRA_LP0_ADDR) " "
#else
#define TEGRA_LP0_VEC
#endif
-/* Environment */
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_ENV_SIZE 0x2000 /* Total Size Environment */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */
-
-/*
- * PllX Configuration
- */
-#define CONFIG_SYS_CPU_OSC_FREQUENCY 1000000 /* Set CPU clock to 1GHz */
-
-/*
- * NS16550 Configuration
- */
-#define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CONS_INDEX 1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
- 115200}
-
/*
* This parameter affects a TXFILLTUNING field that controls how much data is
* sent to the latency fifo before it is sent to the wire. Without this
@@ -107,105 +108,13 @@
/* Total I2C ports on Tegra20 */
#define TEGRA_I2C_NUM_CONTROLLERS 4
-/* include default commands */
-#include <config_cmd_default.h>
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART
-/* remove unused commands */
-#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
-#undef CONFIG_CMD_FPGA /* FPGA configuration support */
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_NFS /* NFS support */
-#undef CONFIG_CMD_NET /* network support */
-
-/* turn on command-line edit/hist/auto */
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_COMMAND_HISTORY
-#define CONFIG_AUTO_COMPLETE
-
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-#define CONFIG_LOADADDR 0x408000 /* def. location for kernel */
-#define CONFIG_BOOTDELAY 2 /* -1 to disable auto boot */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT V_PROMPT
-/*
- * Increasing the size of the IO buffer as default nfsargs size is more
- * than 256 and so it is not possible to edit it
- */
-#define CONFIG_SYS_CBSIZE (256 * 2) /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
-
-#define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000)
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
-
-#define CONFIG_SYS_LOAD_ADDR (0xA00800) /* default */
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_STACKBASE 0x2800000 /* 40MB */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 NV_PA_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */
-
-#define CONFIG_SYS_TEXT_BASE 0x0010c000
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-
-#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
-
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE
-#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_TEGRA_GPIO
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_ENTERRCM
-#define CONFIG_CMD_BOOTZ
-
-/* Defines for SPL */
-#define CONFIG_SPL
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_RAM_DEVICE
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_NAND_SIMPLE
-#define CONFIG_SPL_TEXT_BASE 0x00108000
-#define CONFIG_SPL_MAX_SIZE (CONFIG_SYS_TEXT_BASE - \
- CONFIG_SPL_TEXT_BASE)
-#define CONFIG_SYS_SPL_MALLOC_START 0x00090000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000
-#define CONFIG_SPL_STACK 0x000ffffc
-
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds"
-
#define CONFIG_SYS_NAND_SELF_INIT
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* Misc utility code */
#define CONFIG_BOUNCE_BUFFER
-#endif /* __TEGRA20_COMMON_H */
+#endif /* _TEGRA20_COMMON_H_ */