blob: 0f321d2aac73fef5123e7fc94513afadfe92b837 [file] [log] [blame]
wdenk7ebf7442002-11-02 23:17:16 +00001#
Wolfgang Denkeca3aeb2013-06-21 10:22:36 +02002# (C) Copyright 2000-2013
wdenk7ebf7442002-11-02 23:17:16 +00003# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4#
Wolfgang Denkeca3aeb2013-06-21 10:22:36 +02005# SPDX-License-Identifier: GPL-2.0+
wdenk7ebf7442002-11-02 23:17:16 +00006#
7
Tom Rinid19ad722013-11-25 16:49:32 -05008VERSION = 2014
Tom Rini0a8e8232014-02-19 16:01:28 -05009PATCHLEVEL = 04
Wolfgang Denk211e4752012-07-10 09:21:12 +020010SUBLEVEL =
Tom Rini0a8e8232014-02-19 16:01:28 -050011EXTRAVERSION = -rc1
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +090012NAME =
Wolfgang Denkae6d1052008-01-13 00:59:21 +010013
Masahiro Yamada6825a952014-02-04 17:24:28 +090014# *DOCUMENTATION*
15# To see a list of typical targets execute "make help"
16# More info can be located in ./README
17# Comments in this file are targeted only to the developer, do not
18# expect to learn how to build the kernel reading this file.
19
20# Do not:
21# o use make's built-in rules and variables
22# (this increases performance and avoids hard-to-debug behaviour);
23# o print "Entering directory ...";
24MAKEFLAGS += -rR --no-print-directory
25
26# Avoid funny character set dependencies
27unexport LC_ALL
28LC_COLLATE=C
29LC_NUMERIC=C
30export LC_COLLATE LC_NUMERIC
31
32# We are using a recursive build, so we need to do a little thinking
33# to get the ordering right.
34#
35# Most importantly: sub-Makefiles should only ever modify files in
36# their own directory. If in some directory we have a dependency on
37# a file in another dir (which doesn't happen often, but it's often
38# unavoidable when linking the built-in.o targets which finally
39# turn into vmlinux), we will call a sub make in that other dir, and
40# after that we are sure that everything which is in that other dir
41# is now up to date.
42#
43# The only cases where we need to modify files which have global
44# effects are thus separated out and done before the recursive
45# descending is started. They are now explicitly listed as the
46# prepare rule.
47
48# To put more focus on warnings, be less verbose as default
49# Use 'make V=1' to see the full commands
50
51ifeq ("$(origin V)", "command line")
52 KBUILD_VERBOSE = $(V)
wdenk7ebf7442002-11-02 23:17:16 +000053endif
Masahiro Yamada6825a952014-02-04 17:24:28 +090054ifndef KBUILD_VERBOSE
55 KBUILD_VERBOSE = 0
56endif
57
58# Call a source code checker (by default, "sparse") as part of the
59# C compilation.
60#
61# Use 'make C=1' to enable checking of only re-compiled files.
62# Use 'make C=2' to enable checking of *all* source files, regardless
63# of whether they are re-compiled or not.
64#
65# See the file "Documentation/sparse.txt" for more details, including
66# where to get the "sparse" utility.
67
68ifeq ("$(origin C)", "command line")
69 KBUILD_CHECKSRC = $(C)
70endif
71ifndef KBUILD_CHECKSRC
72 KBUILD_CHECKSRC = 0
73endif
74
75# Use make M=dir to specify directory of external module to build
76# Old syntax make ... SUBDIRS=$PWD is still supported
77# Setting the environment variable KBUILD_EXTMOD take precedence
78ifdef SUBDIRS
79 KBUILD_EXTMOD ?= $(SUBDIRS)
80endif
81
82ifeq ("$(origin M)", "command line")
83 KBUILD_EXTMOD := $(M)
84endif
85
Masahiro Yamada9e414032014-02-04 17:24:24 +090086# kbuild supports saving output files in a separate directory.
87# To locate output files in a separate directory two syntaxes are supported.
88# In both cases the working directory must be the root of the kernel src.
89# 1) O=
90# Use "make O=dir/to/store/output/files/"
Marian Balakowiczf9328632006-09-01 19:49:50 +020091#
Masahiro Yamada9e414032014-02-04 17:24:24 +090092# 2) Set KBUILD_OUTPUT
93# Set the environment variable KBUILD_OUTPUT to point to the directory
94# where the output files shall be placed.
95# export KBUILD_OUTPUT=dir/to/store/output/files/
96# make
Stefan Roese887e2ec2006-09-07 11:51:23 +020097#
Masahiro Yamada9e414032014-02-04 17:24:24 +090098# The O= assignment takes precedence over the KBUILD_OUTPUT environment
99# variable.
wdenk7ebf7442002-11-02 23:17:16 +0000100
Masahiro Yamada9e414032014-02-04 17:24:24 +0900101
102# KBUILD_SRC is set on invocation of make in OBJ directory
103# KBUILD_SRC is not intended to be used by the regular user (for now)
104ifeq ($(KBUILD_SRC),)
105
106# OK, Make called in directory where kernel src resides
107# Do we want to locate output files in a separate directory?
Marian Balakowiczf9328632006-09-01 19:49:50 +0200108ifeq ("$(origin O)", "command line")
Masahiro Yamada9e414032014-02-04 17:24:24 +0900109 KBUILD_OUTPUT := $(O)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200110endif
wdenk7ebf7442002-11-02 23:17:16 +0000111
Masahiro Yamada9e414032014-02-04 17:24:24 +0900112ifeq ("$(origin W)", "command line")
113 export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W)
114endif
115
116# That's our default target when none is given on the command line
117PHONY := _all
118_all:
119
120# Cancel implicit rules on top Makefile
121$(CURDIR)/Makefile Makefile: ;
122
123ifneq ($(KBUILD_OUTPUT),)
124# Invoke a second make in the output directory, passing relevant variables
125# check that the output directory actually exists
126saved-output := $(KBUILD_OUTPUT)
127KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
128$(if $(KBUILD_OUTPUT),, \
129 $(error output directory "$(saved-output)" does not exist))
130
131PHONY += $(MAKECMDGOALS) sub-make
132
133$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
134 @:
135
136sub-make: FORCE
137 $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
138 KBUILD_SRC=$(CURDIR) \
139 KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
140 $(filter-out _all sub-make,$(MAKECMDGOALS))
141
142# Leave processing to above invocation of make
143skip-makefile := 1
144endif # ifneq ($(KBUILD_OUTPUT),)
145endif # ifeq ($(KBUILD_SRC),)
146
147# We process the rest of the Makefile if this is the final invocation of make
148ifeq ($(skip-makefile),)
149
Masahiro Yamada6825a952014-02-04 17:24:28 +0900150# If building an external module we do not care about the all: rule
151# but instead _all depend on modules
Masahiro Yamada9e414032014-02-04 17:24:24 +0900152PHONY += all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900153ifeq ($(KBUILD_EXTMOD),)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900154_all: all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900155else
156_all: modules
157endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900158
159srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
160objtree := $(CURDIR)
161src := $(srctree)
162obj := $(objtree)
163
164VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
165
166export srctree objtree VPATH
167
Masahiro Yamada9e414032014-02-04 17:24:24 +0900168OBJTREE := $(objtree)
Daniel Schwierzeckc8f9c302011-07-18 06:09:15 +0000169SPLTREE := $(OBJTREE)/spl
Ying Zhang3aa29de2013-08-16 15:16:15 +0800170TPLTREE := $(OBJTREE)/tpl
Masahiro Yamada9e414032014-02-04 17:24:24 +0900171SRCTREE := $(srctree)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200172TOPDIR := $(SRCTREE)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900173export TOPDIR SRCTREE OBJTREE SPLTREE TPLTREE
Marian Balakowiczf9328632006-09-01 19:49:50 +0200174
175MKCONFIG := $(SRCTREE)/mkconfig
176export MKCONFIG
177
Wolfgang Denk5013c092008-03-02 22:45:33 +0100178# Make sure CDPATH settings don't interfere
179unexport CDPATH
180
Marian Balakowiczf9328632006-09-01 19:49:50 +0200181#########################################################################
182
wdenk7ebf7442002-11-02 23:17:16 +0000183HOSTARCH := $(shell uname -m | \
184 sed -e s/i.86/x86/ \
185 -e s/sun4u/sparc64/ \
186 -e s/arm.*/arm/ \
187 -e s/sa110/arm/ \
188 -e s/ppc64/powerpc/ \
189 -e s/ppc/powerpc/ \
190 -e s/macppc/powerpc/\
191 -e s/sh.*/sh/)
192
193HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
194 sed -e 's/\(cygwin\).*/cygwin/')
195
196export HOSTARCH HOSTOS
197
198# Deal with colliding definitions from tcsh etc.
199VENDOR=
200
201#########################################################################
Marian Balakowiczf9328632006-09-01 19:49:50 +0200202
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400203# set default to nothing for native builds
Wolfgang Denka5284ef2007-03-06 18:01:47 +0100204ifeq ($(HOSTARCH),$(ARCH))
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400205CROSS_COMPILE ?=
wdenk7ebf7442002-11-02 23:17:16 +0000206endif
wdenk7ebf7442002-11-02 23:17:16 +0000207
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900208# SHELL used by kbuild
209CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
210 else if [ -x /bin/bash ]; then echo /bin/bash; \
211 else echo sh; fi ; fi)
212
213HOSTCC = gcc
214HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
215
216ifeq ($(HOSTOS),cygwin)
217HOSTCFLAGS += -ansi
218endif
219
220# Mac OS X / Darwin's C preprocessor is Apple specific. It
221# generates numerous errors and warnings. We want to bypass it
222# and use GNU C's cpp. To do this we pass the -traditional-cpp
223# option to the compiler. Note that the -traditional-cpp flag
224# DOES NOT have the same semantics as GNU C's flag, all it does
225# is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
226#
227# Apple's linker is similar, thanks to the new 2 stage linking
228# multiple symbol definitions are treated as errors, hence the
229# -multiply_defined suppress option to turn off this error.
230#
231ifeq ($(HOSTOS),darwin)
232# get major and minor product version (e.g. '10' and '6' for Snow Leopard)
233DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
234DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
235
236os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
237 $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
238
239# Snow Leopards build environment has no longer restrictions as described above
240HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
241HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
242HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
243endif
244
Masahiro Yamada6825a952014-02-04 17:24:28 +0900245# Decide whether to build built-in, modular, or both.
246# Normally, just do built-in.
247
248KBUILD_MODULES :=
249KBUILD_BUILTIN := 1
250
251# If we have only "make modules", don't compile built-in objects.
252# When we're building modules with modversions, we need to consider
253# the built-in objects during the descend as well, in order to
254# make sure the checksums are up to date before we record them.
255
256ifeq ($(MAKECMDGOALS),modules)
257 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
258endif
259
260# If we have "make <whatever> modules", compile modules
261# in addition to whatever we do anyway.
262# Just "make" or "make all" shall build modules as well
263
264# U-Boot does not need modules
265#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
266# KBUILD_MODULES := 1
267#endif
268
269#ifeq ($(MAKECMDGOALS),)
270# KBUILD_MODULES := 1
271#endif
272
273export KBUILD_MODULES KBUILD_BUILTIN
274export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
275
276# Beautify output
277# ---------------------------------------------------------------------------
278#
279# Normally, we echo the whole command before executing it. By making
280# that echo $($(quiet)$(cmd)), we now have the possibility to set
281# $(quiet) to choose other forms of output instead, e.g.
282#
283# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
284# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
285#
286# If $(quiet) is empty, the whole command will be printed.
287# If it is set to "quiet_", only the short version will be printed.
288# If it is set to "silent_", nothing will be printed at all, since
289# the variable $(silent_cmd_cc_o_c) doesn't exist.
290#
291# A simple variant is to prefix commands with $(Q) - that's useful
292# for commands that shall be hidden in non-verbose mode.
293#
294# $(Q)ln $@ :<
295#
296# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
297# If KBUILD_VERBOSE equals 1 then the above command is displayed.
298
299ifeq ($(KBUILD_VERBOSE),1)
300 quiet =
301 Q =
302else
303 quiet=quiet_
304 Q = @
305endif
306
307# If the user is running make -s (silent mode), suppress echoing of
308# commands
309
310ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
311 quiet=silent_
312endif
313
314export quiet Q KBUILD_VERBOSE
315
316
Masahiro Yamada9e414032014-02-04 17:24:24 +0900317# Look for make include files relative to root of kernel src
318MAKEFLAGS += --include-dir=$(srctree)
319
Masahiro Yamadabf4b3de2014-02-04 17:24:18 +0900320# We need some generic definitions (do not try to remake the file).
321$(srctree)/scripts/Kbuild.include: ;
322include $(srctree)/scripts/Kbuild.include
323
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900324# Make variables (CC, etc...)
325
326AS = $(CROSS_COMPILE)as
327# Always use GNU ld
328ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
329LD = $(CROSS_COMPILE)ld.bfd
330else
331LD = $(CROSS_COMPILE)ld
332endif
333CC = $(CROSS_COMPILE)gcc
334CPP = $(CC) -E
335AR = $(CROSS_COMPILE)ar
336NM = $(CROSS_COMPILE)nm
337LDR = $(CROSS_COMPILE)ldr
338STRIP = $(CROSS_COMPILE)strip
339OBJCOPY = $(CROSS_COMPILE)objcopy
340OBJDUMP = $(CROSS_COMPILE)objdump
341AWK = awk
342RANLIB = $(CROSS_COMPILE)RANLIB
343DTC = dtc
344CHECK = sparse
345
346CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
347 -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
348
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900349KBUILD_CPPFLAGS := -D__KERNEL__
350
351KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
352 -Wno-format-security \
353 -fno-builtin -ffreestanding
354KBUILD_AFLAGS := -D__ASSEMBLY__
355
Masahiro Yamada74241452014-02-24 11:12:09 +0900356# Read UBOOTRELEASE from include/config/uboot.release (if it exists)
357UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
358UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +0900359
Masahiro Yamada74241452014-02-24 11:12:09 +0900360export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900361export ARCH CPU BOARD VENDOR SOC
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900362export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
363export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
364export MAKE AWK
365export DTC CHECK CHECKFLAGS
366
Masahiro Yamadafea1ca82014-02-04 17:24:20 +0900367export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900368export KBUILD_CFLAGS KBUILD_AFLAGS
369
Masahiro Yamada6825a952014-02-04 17:24:28 +0900370# When compiling out-of-tree modules, put MODVERDIR in the module
371# tree rather than in the kernel tree. The kernel tree might
372# even be read-only.
373export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
374
375# Files to ignore in find ... statements
376
377RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \
378 -o -name .pc -o -name .hg -o -name .git \) -prune -o
379export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
380 --exclude CVS --exclude .pc --exclude .hg --exclude .git
381
382# ===========================================================================
383# Rules shared between *config targets and build targets
384
385# Basic helpers built in scripts/
386PHONY += scripts_basic
387scripts_basic:
388 $(Q)$(MAKE) $(build)=scripts/basic
389 $(Q)rm -f .tmp_quiet_recordmcount
390
391# To avoid any implicit rule to kick in, define an empty command.
392scripts/basic/%: scripts_basic ;
393
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900394PHONY += outputmakefile
395# outputmakefile generates a Makefile in the output directory, if using a
396# separate output directory. This allows convenient use of make in the
397# output directory.
398outputmakefile:
399ifneq ($(KBUILD_SRC),)
400 $(Q)ln -fsn $(srctree) source
401 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
402 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
403endif
404
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900405# To make sure we do not include .config for any of the *config targets
406# catch them early, and hand them over to scripts/kconfig/Makefile
407# It is allowed to specify more targets when calling make, including
408# mixing *config targets and build targets.
409# For example 'make oldconfig all'.
410# Detect when mixed targets is specified, and make a second invocation
411# of make so .config is not included in this case either (for *config).
Masahiro Yamada6825a952014-02-04 17:24:28 +0900412
Masahiro Yamada74241452014-02-24 11:12:09 +0900413version_h := include/generated/version_autogenerated.h
414timestamp_h := include/generated/timestamp_autogenerated.h
415
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900416no-dot-config-targets := clean clobber mrproper distclean \
Masahiro Yamada27651182014-02-21 15:45:11 +0900417 help %docs check% coccicheck \
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900418 backup
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900419
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900420config-targets := 0
421mixed-targets := 0
422dot-config := 1
423
424ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
425 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
426 dot-config := 0
427 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900428endif
429
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900430ifeq ($(KBUILD_EXTMOD),)
431 ifneq ($(filter config %config,$(MAKECMDGOALS)),)
432 config-targets := 1
433 ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
434 mixed-targets := 1
435 endif
436 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900437endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900438
439ifeq ($(mixed-targets),1)
440# ===========================================================================
441# We're called with mixed targets (*config and build targets).
442# Handle them one by one.
443
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900444PHONY += $(MAKECMDGOALS) build-one-by-one
445
446$(MAKECMDGOALS): build-one-by-one
447 @:
448
449build-one-by-one:
450 $(Q)set -e; \
451 for i in $(MAKECMDGOALS); do \
452 $(MAKE) -f $(srctree)/Makefile $$i; \
453 done
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900454
455else
456ifeq ($(config-targets),1)
457# ===========================================================================
458# *config targets only - make sure prerequisites are updated, and descend
459# in scripts/kconfig to make the *config target
460
461# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
462# KBUILD_DEFCONFIG may point out an alternative default configuration
463# used for 'make defconfig'
464
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900465%_config:: outputmakefile
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900466 @$(MKCONFIG) -A $(@:_config=)
467
468else
469# ===========================================================================
470# Build targets only - this includes vmlinux, arch specific targets, clean
471# targets and others. In general all targets except *config targets.
472
473# load ARCH, BOARD, and CPU configuration
474-include include/config.mk
475
476ifeq ($(dot-config),1)
477# Read in config
478-include include/autoconf.mk
479-include include/autoconf.mk.dep
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900480
Wolfgang Denk92b197f2006-03-12 01:37:50 +0100481# load other configuration
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900482include $(srctree)/config.mk
Wolfgang Denk92b197f2006-03-12 01:37:50 +0100483
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900484ifeq ($(wildcard include/config.mk),)
485$(error "System not configured - see README")
Masahiro Yamadaced07152014-02-04 17:24:21 +0900486endif
Simon Glassfada9e22013-04-20 08:42:36 +0000487
Masahiro Yamadaced07152014-02-04 17:24:21 +0900488ifeq ($(__HAVE_ARCH_GENERIC_BOARD),)
489ifneq ($(CONFIG_SYS_GENERIC_BOARD),)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900490$(error Your architecture does not support generic board. \
Masahiro Yamadaced07152014-02-04 17:24:21 +0900491Please undefined CONFIG_SYS_GENERIC_BOARD in your board config file)
Simon Glassfada9e22013-04-20 08:42:36 +0000492endif
493endif
494
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000495# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
496# that (or fail if absent). Otherwise, search for a linker script in a
497# standard location.
498
Simon Glassee601972011-11-21 10:49:37 +0000499LDSCRIPT_MAKEFILE_DIR = $(dir $(LDSCRIPT))
500
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000501ifndef LDSCRIPT
502 #LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
503 ifdef CONFIG_SYS_LDSCRIPT
504 # need to strip off double quotes
Masahiro Yamadaa8c07542013-12-05 15:08:31 +0900505 LDSCRIPT := $(CONFIG_SYS_LDSCRIPT:"%"=%)
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000506 endif
507endif
508
Simon Glassee601972011-11-21 10:49:37 +0000509# If there is no specified link script, we look in a number of places for it
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000510ifndef LDSCRIPT
511 ifeq ($(CONFIG_NAND_U_BOOT),y)
512 LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
513 ifeq ($(wildcard $(LDSCRIPT)),)
514 LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
515 endif
516 endif
517 ifeq ($(wildcard $(LDSCRIPT)),)
518 LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
519 endif
520 ifeq ($(wildcard $(LDSCRIPT)),)
521 LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot.lds
522 endif
523 ifeq ($(wildcard $(LDSCRIPT)),)
Simon Glassee601972011-11-21 10:49:37 +0000524 LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot.lds
525 # We don't expect a Makefile here
526 LDSCRIPT_MAKEFILE_DIR =
527 endif
528 ifeq ($(wildcard $(LDSCRIPT)),)
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000529$(error could not find linker script)
530 endif
531endif
532
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900533else
534
535
536endif # $(dot-config)
537
538KBUILD_CFLAGS += -Os #-fomit-frame-pointer
539
540ifdef BUILD_TAG
541KBUILD_CFLAGS += -DBUILD_TAG='"$(BUILD_TAG)"'
542endif
543
544KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
545
546KBUILD_CFLAGS += -g
547# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
548# option to the assembler.
549KBUILD_AFLAGS += -g
550
551# Report stack usage if supported
Masahiro Yamada5b1f1f42013-12-11 20:11:34 +0900552ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
553 KBUILD_CFLAGS += -fstack-usage
554endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900555
556KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
557
558# turn jbsr into jsr for m68k
559ifeq ($(ARCH),m68k)
560ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
561KBUILD_AFLAGS += -Wa,-gstabs,-S
562endif
563endif
564
565ifneq ($(CONFIG_SYS_TEXT_BASE),)
566KBUILD_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
567endif
568
569export CONFIG_SYS_TEXT_BASE
570
571# Use UBOOTINCLUDE when you must reference the include/ directory.
572# Needed to be compatible with the O= option
573UBOOTINCLUDE :=
574ifneq ($(OBJTREE),$(SRCTREE))
575UBOOTINCLUDE += -I$(OBJTREE)/include
576endif
577UBOOTINCLUDE += -I$(srctree)/include \
578 -I$(srctree)/arch/$(ARCH)/include
579
580NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
581CHECKFLAGS += $(NOSTDINC_FLAGS)
582
583# FIX ME
584cpp_flags := $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(UBOOTINCLUDE) $(NOSTDINC_FLAGS)
585c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
586
wdenk7ebf7442002-11-02 23:17:16 +0000587#########################################################################
588# U-Boot objects....order is important (i.e. start must be first)
589
Masahiro Yamadae8a8b822013-11-28 12:09:59 +0900590head-y := $(CPUDIR)/start.o
591head-$(CONFIG_4xx) += arch/powerpc/cpu/ppc4xx/resetvec.o
592head-$(CONFIG_MPC85xx) += arch/powerpc/cpu/mpc85xx/resetvec.o
wdenk7ebf7442002-11-02 23:17:16 +0000593
Masahiro Yamada9e414032014-02-04 17:24:24 +0900594HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200595
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900596libs-y += lib/
597libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
598libs-y += $(CPUDIR)/
wdenk1d9f4102004-10-09 22:21:29 +0000599ifdef SOC
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900600libs-y += $(CPUDIR)/$(SOC)/
wdenk1d9f4102004-10-09 22:21:29 +0000601endif
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900602libs-$(CONFIG_OF_EMBED) += dts/
603libs-y += arch/$(ARCH)/lib/
604libs-y += fs/
605libs-y += net/
606libs-y += disk/
607libs-y += drivers/
608libs-y += drivers/dma/
609libs-y += drivers/gpio/
610libs-y += drivers/i2c/
611libs-y += drivers/input/
612libs-y += drivers/mmc/
613libs-y += drivers/mtd/
614libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
615libs-y += drivers/mtd/onenand/
616libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
617libs-y += drivers/mtd/spi/
618libs-y += drivers/net/
619libs-y += drivers/net/phy/
620libs-y += drivers/pci/
621libs-y += drivers/power/ \
Masahiro Yamadae2906a52013-11-11 14:36:00 +0900622 drivers/power/fuel_gauge/ \
623 drivers/power/mfd/ \
624 drivers/power/pmic/ \
625 drivers/power/battery/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900626libs-y += drivers/spi/
627libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
628libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
629libs-y += drivers/serial/
630libs-y += drivers/usb/eth/
631libs-y += drivers/usb/gadget/
632libs-y += drivers/usb/host/
633libs-y += drivers/usb/musb/
634libs-y += drivers/usb/musb-new/
635libs-y += drivers/usb/phy/
636libs-y += drivers/usb/ulpi/
637libs-y += common/
638libs-y += lib/libfdt/
639libs-$(CONFIG_API) += api/
640libs-$(CONFIG_HAS_POST) += post/
641libs-y += test/
Marian Balakowiczf9328632006-09-01 19:49:50 +0200642
Alison Wang24e8bee2013-05-27 22:55:42 +0000643ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900644libs-y += arch/$(ARCH)/imx-common/
Jason Liu18936ee2011-11-25 00:18:01 +0000645endif
646
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900647libs-$(CONFIG_ARM) += arch/arm/cpu/
648libs-$(CONFIG_PPC) += arch/powerpc/cpu/
Minkyu Kang852bd072010-08-19 13:48:11 +0900649
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900650libs-y += board/$(BOARDDIR)/
Masahiro Yamada08e39a82013-11-11 14:35:55 +0900651
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900652libs-y := $(sort $(libs-y))
653
654u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
655
656u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
657
658libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
659
660u-boot-init := $(head-y)
661u-boot-main := $(libs-y)
662
wdenka8c7c702003-12-06 19:49:23 +0000663
wdenk4f7cb082003-09-11 23:06:34 +0000664# Add GCC lib
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200665ifdef USE_PRIVATE_LIBGCC
666ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
Masahiro Yamada6825a952014-02-04 17:24:28 +0900667PLATFORM_LIBGCC = $(OBJTREE)/arch/$(ARCH)/lib/lib.a
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200668else
669PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
670endif
671else
Masahiro Yamada6825a952014-02-04 17:24:28 +0900672PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200673endif
674PLATFORM_LIBS += $(PLATFORM_LIBGCC)
675export PLATFORM_LIBS
wdenk3d3befa2004-03-14 15:06:13 +0000676
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400677# Special flags for CPP when processing the linker script.
678# Pass the version down so we can handle backwards compatibility
679# on the fly.
680LDPPFLAGS += \
681 -include $(TOPDIR)/include/u-boot/u-boot.lds.h \
Simon Glass7e6403a2011-11-21 10:49:40 +0000682 -DCPUDIR=$(CPUDIR) \
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400683 $(shell $(LD) --version | \
684 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
685
wdenk7ebf7442002-11-02 23:17:16 +0000686#########################################################################
wdenkbdccc4f2003-08-05 17:43:17 +0000687#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +0000688
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400689ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
690BOARD_SIZE_CHECK = \
691 @actual=`wc -c $@ | awk '{print $$1}'`; \
Joe Hershbergerd060e6f2012-11-08 10:19:09 +0000692 limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400693 if test $$actual -gt $$limit; then \
Joe Hershbergerd060e6f2012-11-08 10:19:09 +0000694 echo "$@ exceeds file size limit:" >&2 ; \
695 echo " limit: $$limit bytes" >&2 ; \
696 echo " actual: $$actual bytes" >&2 ; \
697 echo " excess: $$((actual - limit)) bytes" >&2; \
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400698 exit 1; \
699 fi
700else
701BOARD_SIZE_CHECK =
702endif
703
Scott Wood8137af12013-12-14 11:47:32 +0800704# Statically apply RELA-style relocations (currently arm64 only)
705ifneq ($(CONFIG_STATIC_RELA),)
706# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
707DO_STATIC_RELA = \
708 start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
709 end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
Masahiro Yamada9e414032014-02-04 17:24:24 +0900710 tools/relocate-rela $(2) $(3) $$start $$end
Scott Wood8137af12013-12-14 11:47:32 +0800711else
712DO_STATIC_RELA =
713endif
714
Mike Frysinger3e883372009-06-15 00:25:19 -0400715# Always append ALL so that arch config.mk's can add custom ones
Masahiro Yamada9e414032014-02-04 17:24:24 +0900716ALL-y += u-boot.srec u-boot.bin System.map
Haiying Wange935a372011-01-27 09:44:59 -0500717
Masahiro Yamada9e414032014-02-04 17:24:24 +0900718ALL-$(CONFIG_NAND_U_BOOT) += u-boot-nand.bin
719ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
720ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
721ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
722ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
723ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +0900724ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.bin
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000725ifneq ($(CONFIG_SPL_TARGET),)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900726ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000727endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900728ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
wdenk7ebf7442002-11-02 23:17:16 +0000729
Allen Martin12b7b702012-08-31 08:30:12 +0000730# enable combined SPL/u-boot/dtb rules for tegra
Tom Warren6d6c0ba2012-12-11 13:34:17 +0000731ifneq ($(CONFIG_TEGRA),)
Vidya Sagar7dcd3a22013-10-31 14:51:38 +0530732ifeq ($(CONFIG_SPL),y)
Allen Martin12b7b702012-08-31 08:30:12 +0000733ifeq ($(CONFIG_OF_SEPARATE),y)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900734ALL-y += u-boot-dtb-tegra.bin
Allen Martin12b7b702012-08-31 08:30:12 +0000735else
Masahiro Yamada9e414032014-02-04 17:24:24 +0900736ALL-y += u-boot-nodtb-tegra.bin
Allen Martin12b7b702012-08-31 08:30:12 +0000737endif
738endif
Vidya Sagar7dcd3a22013-10-31 14:51:38 +0530739endif
Allen Martin12b7b702012-08-31 08:30:12 +0000740
Masahiro Yamadaad0fed42014-02-24 11:12:18 +0900741LDFLAGS_u-boot += $(LDFLAGS_FINAL)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900742ifneq ($(CONFIG_SYS_TEXT_BASE),)
743LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
744endif
Masahiro Yamada71f84ef2013-10-17 17:34:53 +0900745
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900746quiet_cmd_objcopy = OBJCOPY $@
747cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
748
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900749quiet_cmd_mkimage = UIMAGE $@
750cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
751 $(if $(KBUILD_VERBOSE:1=), >/dev/null)
752
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +0900753quiet_cmd_cat = CAT $@
754cmd_cat = cat $(filter-out $(PHONY), $^) > $@
755
Masahiro Yamada982a1192014-02-24 11:12:17 +0900756append = cat $(filter-out $< $(PHONY), $^) >> $@
757
758quiet_cmd_pad_cat = CAT $@
759cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
760
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900761all: $(ALL-y)
wdenk7ebf7442002-11-02 23:17:16 +0000762
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +0900763PHONY += dtbs
764dtbs dts/dt.dtb: checkdtc u-boot
765 $(Q)$(MAKE) $(build)=dts dtbs
Simon Glass2c0f79e2011-10-24 19:15:31 +0000766
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +0900767u-boot-dtb.bin: u-boot.bin dts/dt.dtb FORCE
768 $(call if_changed,cat)
Simon Glass2c0f79e2011-10-24 19:15:31 +0000769
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900770OBJCOPYFLAGS_u-boot.hex := -O ihex
wdenk6310eb92005-01-09 21:28:15 +0000771
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900772OBJCOPYFLAGS_u-boot.srec := -O srec
wdenk7ebf7442002-11-02 23:17:16 +0000773
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900774u-boot.hex u-boot.srec: u-boot FORCE
775 $(call if_changed,objcopy)
776
777OBJCOPYFLAGS_u-boot.bin := -O binary
778
779u-boot.bin: u-boot FORCE
780 $(call if_changed,objcopy)
781 $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
782 $(BOARD_SIZE_CHECK)
wdenk7ebf7442002-11-02 23:17:16 +0000783
Masahiro Yamada9e414032014-02-04 17:24:24 +0900784u-boot.ldr: u-boot
Mike Frysinger76d82182009-07-21 22:17:36 -0400785 $(CREATE_LDR_ENV)
Mike Frysinger68e56322008-08-07 18:56:56 -0400786 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400787 $(BOARD_SIZE_CHECK)
Mike Frysinger94a91e22008-02-04 19:26:57 -0500788
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900789OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
Mike Frysinger94a91e22008-02-04 19:26:57 -0500790
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900791OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
792
793u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
794 $(call if_changed,objcopy)
Mike Frysinger94a91e22008-02-04 19:26:57 -0500795
Stefan Roeseb40bda62012-08-16 17:54:52 +0200796#
797# U-Boot entry point, needed for booting of full-blown U-Boot
798# from the SPL U-Boot version.
799#
800ifndef CONFIG_SYS_UBOOT_START
801CONFIG_SYS_UBOOT_START := 0
802endif
803
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900804MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
805 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
806 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
807
808MKIMAGEFLAGS_u-boot.kwb = -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
809 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
810
811MKIMAGEFLAGS_u-boot.pbl = -n $(CONFIG_SYS_FSL_PBL_RCW) \
812 -R $(CONFIG_SYS_FSL_PBL_PBI) -T pblimage
813
814u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE
815 $(call if_changed,mkimage)
wdenkbdccc4f2003-08-05 17:43:17 +0000816
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900817u-boot.imx: u-boot.bin
Masahiro Yamada03c7b3f2014-02-24 11:12:13 +0900818 $(Q)$(MAKE) $(build)=arch/arm/imx-common $(objtree)/$@
Stefano Babic8edcde52010-01-20 18:19:10 +0100819
Masahiro Yamada9e414032014-02-04 17:24:24 +0900820u-boot.sha1: u-boot.bin
821 tools/ubsha1 u-boot.bin
Heiko Schocher566a4942007-06-22 19:11:54 +0200822
Masahiro Yamada9e414032014-02-04 17:24:24 +0900823u-boot.dis: u-boot
wdenk7ebf7442002-11-02 23:17:16 +0000824 $(OBJDUMP) -d $< > $@
825
Ying Zhang3aa29de2013-08-16 15:16:15 +0800826ifdef CONFIG_TPL
Masahiro Yamada9e414032014-02-04 17:24:24 +0900827SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
Ying Zhang3aa29de2013-08-16 15:16:15 +0800828else
Masahiro Yamada9e414032014-02-04 17:24:24 +0900829SPL_PAYLOAD := u-boot.bin
Ying Zhang3aa29de2013-08-16 15:16:15 +0800830endif
Scott Wood74752ba2012-12-06 13:33:16 +0000831
Masahiro Yamada982a1192014-02-24 11:12:17 +0900832OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
833 --pad-to=$(CONFIG_SPL_PAD_TO)
834u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
835 $(call if_changed,pad_cat)
Ying Zhang3aa29de2013-08-16 15:16:15 +0800836
Masahiro Yamada982a1192014-02-24 11:12:17 +0900837OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
838 --pad-to=$(CONFIG_TPL_PAD_TO)
839tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
840 $(call if_changed,pad_cat)
Heiko Schocher7816f2c2011-07-16 00:06:42 +0000841
Masahiro Yamada03c7b3f2014-02-24 11:12:13 +0900842u-boot-with-spl.imx u-boot-with-nand-spl.imx: spl/u-boot-spl.bin u-boot.bin
843 $(Q)$(MAKE) $(build)=arch/arm/imx-common $(objtree)/$@
Benoît Thébaudeau7d5a5c72013-04-11 09:35:57 +0000844
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900845MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
846
847u-boot.ubl: u-boot-with-spl.bin FORCE
848 $(call if_changed,mkimage)
José Miguel Gonçalves277f00f2012-09-19 01:25:26 +0000849
Masahiro Yamada982a1192014-02-24 11:12:17 +0900850MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
851 $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
852 -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
853spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
854 $(call if_changed,mkimage)
Christian Rieschd36d8852011-12-09 09:47:39 +0000855
Masahiro Yamada982a1192014-02-24 11:12:17 +0900856OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_MAX_SIZE)
857u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
858 $(call if_changed,pad_cat)
Otavio Salvadora5453552012-08-18 07:25:25 +0000859
Masahiro Yamada03c7b3f2014-02-24 11:12:13 +0900860u-boot.sb: u-boot.bin spl/u-boot-spl.bin
861 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs $(objtree)/u-boot.sb
Marek Vasut30b9b932011-11-08 23:18:19 +0000862
Stefan Roese94aebe62012-01-05 11:19:50 +0100863# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
864# Both images are created using mkimage (crc etc), so that the ROM
865# bootloader can check its integrity. Padding needs to be done to the
866# SPL image (with mkimage header) and not the binary. Otherwise the resulting image
867# which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
868# The resulting image containing both U-Boot images is called u-boot.spr
Masahiro Yamada982a1192014-02-24 11:12:17 +0900869MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
870 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
871spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
872 $(call if_changed,mkimage)
873
874OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
875 --gap-fill=0xff
876u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
877 $(call if_changed,pad_cat)
Stefan Roese94aebe62012-01-05 11:19:50 +0100878
Tom Warren6d6c0ba2012-12-11 13:34:17 +0000879ifneq ($(CONFIG_TEGRA),)
Masahiro Yamada982a1192014-02-24 11:12:17 +0900880OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
881u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
882 $(call if_changed,pad_cat)
Stephen Warren9972db52013-05-14 08:00:53 +0000883
884ifeq ($(CONFIG_OF_SEPARATE),y)
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +0900885u-boot-dtb-tegra.bin: u-boot-nodtb-tegra.bin dts/dt.dtb FORCE
886 $(call if_changed,cat)
Stephen Warren9972db52013-05-14 08:00:53 +0000887endif
Allen Martin984df4e2012-08-31 08:30:10 +0000888endif
889
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +0900890u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
891 $(call if_changed,cat)
Stefan Roesefb3d2b82012-08-24 17:36:53 +0200892
Stefan Roeseecddccd2013-02-22 11:36:50 +0100893# PPC4xx needs the SPL at the end of the image, since the reset vector
894# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
895# and need to introduce a new build target with the full blown U-Boot
896# at the start padded up to the start of the SPL image. And then concat
897# the SPL image to the end.
Masahiro Yamada982a1192014-02-24 11:12:17 +0900898
899OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
900 --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
901u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
902 $(call if_changed,pad_cat)
Stefan Roeseecddccd2013-02-22 11:36:50 +0100903
Scott Woodf4dc7142013-12-14 11:47:33 +0800904# Create a new ELF from a raw binary file. This is useful for arm64
905# where static relocation needs to be performed on the raw binary,
906# but certain simulators only accept an ELF file (but don't do the
907# relocation).
908# FIXME refactor dts/Makefile to share target/arch detection
Masahiro Yamada9e414032014-02-04 17:24:24 +0900909u-boot.elf: u-boot.bin
Scott Woodf4dc7142013-12-14 11:47:33 +0800910 @$(OBJCOPY) -B aarch64 -I binary -O elf64-littleaarch64 \
Masahiro Yamada9e414032014-02-04 17:24:24 +0900911 $< u-boot-elf.o
912 @$(LD) u-boot-elf.o -o $@ \
Scott Woodf4dc7142013-12-14 11:47:33 +0800913 --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \
914 -Ttext=$(CONFIG_SYS_TEXT_BASE)
915
Masahiro Yamadaad0fed42014-02-24 11:12:18 +0900916# Rule to link u-boot
917# May be overridden by arch/$(ARCH)/config.mk
918quiet_cmd_u-boot__ ?= LD $@
919 cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
920 -T u-boot.lds $(u-boot-init) \
921 --start-group $(u-boot-main) --end-group \
922 $(PLATFORM_LIBS) -Map u-boot.map
Simon Glass86eb49b2011-10-03 19:26:50 +0000923
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900924u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds
Masahiro Yamadaad0fed42014-02-24 11:12:18 +0900925 $(call if_changed,u-boot__)
Mike Frysingerecb1dc82009-05-20 04:35:14 -0400926ifeq ($(CONFIG_KALLSYMS),y)
Masahiro Yamadaad0fed42014-02-24 11:12:18 +0900927 smap=`$(call SYSTEM_MAP,u-boot) | \
928 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
929 $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
930 -c $(srctree)/common/system_map.c -o common/system_map.o
931 $(call cmd,u-boot__) common/system_map.o
Mike Frysingerecb1dc82009-05-20 04:35:14 -0400932endif
wdenk7ebf7442002-11-02 23:17:16 +0000933
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900934# The actual objects are generated when descending,
935# make sure no implicit rule kicks in
936$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
Marian Balakowiczf9328632006-09-01 19:49:50 +0200937
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900938# Handle descending into subdirectories listed in $(vmlinux-dirs)
939# Preset locale variables to speed up the build process. Limit locale
940# tweaks to this spot to avoid wrong language settings when running
941# make menuconfig etc.
942# Error messages still appears in the original language
wdenka8c7c702003-12-06 19:49:23 +0000943
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900944PHONY += $(u-boot-dirs)
Masahiro Yamada63780082014-02-24 11:12:10 +0900945$(u-boot-dirs): prepare scripts
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900946 $(Q)$(MAKE) $(build)=$@
Masahiro Yamada940db162014-02-04 17:24:10 +0900947
Masahiro Yamada74241452014-02-24 11:12:09 +0900948tools: prepare
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900949# The "tools" are needed early
950$(filter-out tools, $(u-boot-dirs)): tools
951# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
952# is "yes"), so compile examples after U-Boot is compiled.
953examples: $(filter-out examples, $(u-boot-dirs))
954
Masahiro Yamada74241452014-02-24 11:12:09 +0900955define filechk_uboot.release
956 echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
957endef
958
959# Store (new) UBOOTRELEASE string in include/config/uboot.release
960include/config/uboot.release: Makefile FORCE
961 $(call filechk,uboot.release)
962
963
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900964# Things we need to do before we recursively start building the kernel
965# or the modules are listed in "prepare".
966# A multi level approach is used. prepareN is processed before prepareN-1.
967# archprepare is used in arch Makefiles and when processed asm symlink,
968# version.h and scripts_basic is processed / created.
969
970# Listed in dependency order
971PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
972
973# prepare3 is used to check if we are building in a separate output directory,
974# and if so do:
975# 1) Check that make has not been executed in the kernel src $(srctree)
Masahiro Yamada74241452014-02-24 11:12:09 +0900976prepare3: include/config/uboot.release
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900977ifneq ($(KBUILD_SRC),)
978 @$(kecho) ' Using $(srctree) as source for u-boot'
979 $(Q)if [ -f $(srctree)/include/config.mk ]; then \
980 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
981 echo >&2 " in the '$(srctree)' directory.";\
982 /bin/false; \
983 fi;
984endif
985
986# prepare2 creates a makefile if using a separate output directory
987prepare2: prepare3 outputmakefile
988
Masahiro Yamada74241452014-02-24 11:12:09 +0900989prepare1: prepare2 $(version_h) $(timestamp_h)
wdenk7ebf7442002-11-02 23:17:16 +0000990 @:
991
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900992archprepare: prepare1 scripts_basic
wdenka8c7c702003-12-06 19:49:23 +0000993
Masahiro Yamada6a44d802014-02-24 11:12:11 +0900994prepare0: archprepare FORCE
995 $(Q)$(MAKE) $(build)=.
wdenk7ebf7442002-11-02 23:17:16 +0000996
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900997# All the preparing..
998prepare: prepare0
Che-liang Chiou349e83f2011-10-17 21:04:15 +0000999
Masahiro Yamada74241452014-02-24 11:12:09 +09001000# Generate some files
1001# ---------------------------------------------------------------------------
1002
1003define filechk_version.h
1004 (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1005 echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
1006 echo \#define CC_VERSION_STRING \"$$($(CC) --version | head -n 1)\"; \
1007 echo \#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; )
1008endef
1009
1010define filechk_timestamp.h
1011 (LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
1012 LC_ALL=C date +'#define U_BOOT_TIME "%T"')
1013endef
1014
1015$(version_h): $(srctree)/Makefile FORCE
1016 $(call filechk,version.h)
1017
1018$(timestamp_h): $(srctree)/Makefile FORCE
1019 $(call filechk,timestamp.h)
1020
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001021#
1022# Auto-generate the autoconf.mk file (which is included by all makefiles)
1023#
1024# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
1025# the dep file is only include in this top level makefile to determine when
1026# to regenerate the autoconf.mk file.
Wolfgang Denk1aada9c2009-08-17 14:00:53 +02001027
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001028quiet_cmd_autoconf_dep = GEN $@
1029 cmd_autoconf_dep = $(CC) -x c -DDO_DEPS_ONLY -M $(c_flags) \
1030 -MQ include/autoconf.mk $(srctree)/include/common.h > $@ || rm $@
Stefan Roese887e2ec2006-09-07 11:51:23 +02001031
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001032include/autoconf.mk.dep: include/config.h include/common.h
1033 $(call cmd,autoconf_dep)
Stefan Roese887e2ec2006-09-07 11:51:23 +02001034
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001035quiet_cmd_autoconf = GEN $@
1036 cmd_autoconf = \
1037 $(CPP) $(c_flags) -DDO_DEPS_ONLY -dM $(srctree)/include/common.h > $@.tmp && \
1038 sed -n -f $(srctree)/tools/scripts/define2mk.sed $@.tmp > $@; \
1039 rm $@.tmp
Daniel Schwierzeck5df2ee22011-07-13 05:11:04 +00001040
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001041include/autoconf.mk: include/config.h
1042 $(call cmd,autoconf)
1043
Masahiro Yamada63780082014-02-24 11:12:10 +09001044# ---------------------------------------------------------------------------
1045
1046PHONY += depend dep
1047depend dep:
1048 @echo '*** Warning: make $@ is unnecessary now.'
1049
1050# ---------------------------------------------------------------------------
Masahiro Yamada04a34c92014-02-24 11:12:19 +09001051quiet_cmd_cpp_lds = LDS $@
1052cmd_cpp_lds = $(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ \
1053 -x assembler-with-cpp -P -o $@ $<
Masahiro Yamada63780082014-02-24 11:12:10 +09001054
Masahiro Yamada04a34c92014-02-24 11:12:19 +09001055u-boot.lds: $(LDSCRIPT) prepare FORCE
1056 $(call if_changed,cpp_lds)
Stefan Roesef2302d42008-08-06 14:05:38 +02001057
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +09001058PHONY += nand_spl
Masahiro Yamada63780082014-02-24 11:12:10 +09001059nand_spl: prepare
Masahiro Yamada03c7b3f2014-02-24 11:12:13 +09001060 $(Q)$(MAKE) $(build)=nand_spl/board/$(BOARDDIR) all
Kyungmin Parkca6189d2009-09-22 09:05:00 +09001061
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +09001062nand_spl/u-boot-spl-16k.bin: nand_spl
1063 @:
1064
1065u-boot-nand.bin: nand_spl/u-boot-spl-16k.bin u-boot.bin FORCE
1066 $(call if_changed,cat)
Chander Kashyap0d3c62e2011-05-24 20:02:57 +00001067
Masahiro Yamada982a1192014-02-24 11:12:17 +09001068spl/u-boot-spl.bin: spl/u-boot-spl
1069 @:
1070spl/u-boot-spl: tools prepare
Masahiro Yamada03c7b3f2014-02-24 11:12:13 +09001071 $(Q)$(MAKE) obj=spl -f $(srctree)/spl/Makefile all
Chander Kashyap0d3c62e2011-05-24 20:02:57 +00001072
Masahiro Yamada63780082014-02-24 11:12:10 +09001073tpl/u-boot-tpl.bin: tools prepare
Masahiro Yamada03c7b3f2014-02-24 11:12:13 +09001074 $(Q)$(MAKE) obj=tpl -f $(srctree)/spl/Makefile all CONFIG_TPL_BUILD=y
Ying Zhang3aa29de2013-08-16 15:16:15 +08001075
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001076TAG_SUBDIRS := $(u-boot-dirs) include
Jean-Christophe PLAGNIOL-VILLARDa340c322007-11-25 18:45:47 +01001077
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00001078FIND := find
1079FINDFLAGS := -L
1080
Masahiro Yamada47f15712014-02-04 17:24:31 +09001081PHONY += checkstack
1082
Tom Rini1064d982012-02-02 14:07:05 +00001083checkstack:
Masahiro Yamada47f15712014-02-04 17:24:31 +09001084 $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
1085 $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
Tom Rini1064d982012-02-02 14:07:05 +00001086
Marian Balakowiczf9328632006-09-01 19:49:50 +02001087tags ctags:
Masahiro Yamada9e414032014-02-04 17:24:24 +09001088 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08001089 -name '*.[chS]' -print`
wdenk7ebf7442002-11-02 23:17:16 +00001090
1091etags:
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00001092 etags -a -o $(obj)etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08001093 -name '*.[chS]' -print`
Li Yangffda5862008-02-29 11:46:05 +08001094cscope:
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00001095 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
1096 cscope.files
Li Yangffda5862008-02-29 11:46:05 +08001097 cscope -b -q -k
wdenk7ebf7442002-11-02 23:17:16 +00001098
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001099SYSTEM_MAP = \
1100 $(NM) $1 | \
wdenk7ebf7442002-11-02 23:17:16 +00001101 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001102 LC_ALL=C sort
Masahiro Yamada9e414032014-02-04 17:24:24 +09001103System.map: u-boot
Masahiro Yamadabc8bb6e2013-11-11 14:36:01 +09001104 @$(call SYSTEM_MAP,$<) > $@
wdenk7ebf7442002-11-02 23:17:16 +00001105
Tom Rini06a119a2012-03-16 06:34:35 +00001106checkthumb:
1107 @if test $(call cc-version) -lt 0404; then \
1108 echo -n '*** Your GCC does not produce working '; \
1109 echo 'binaries in THUMB mode.'; \
1110 echo '*** Your board is configured for THUMB mode.'; \
1111 false; \
1112 fi
Scott Wood6ec63f42012-09-20 19:10:01 -05001113
1114# GCC 3.x is reported to have problems generating the type of relocation
1115# that U-Boot wants.
1116# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html
1117checkgcc4:
1118 @if test $(call cc-version) -lt 0400; then \
1119 echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \
1120 false; \
1121 fi
1122
Stephen Warren501ebdf2013-07-24 10:09:16 -07001123checkdtc:
1124 @if test $(call dtc-version) -lt 0104; then \
1125 echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
1126 false; \
1127 fi
1128
wdenk7ebf7442002-11-02 23:17:16 +00001129#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +00001130
Scott Wood54799e42013-12-14 11:47:34 +08001131# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1132# R_AARCH64_RELATIVE (64-bit).
Masahiro Yamada9e414032014-02-04 17:24:24 +09001133checkarmreloc: u-boot
Scott Wood54799e42013-12-14 11:47:34 +08001134 @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1135 grep R_A | sort -u`"; \
1136 if test "$$RELOC" != "R_ARM_RELATIVE" -a \
1137 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1138 echo "$< contains unexpected relocations: $$RELOC"; \
1139 false; \
1140 fi
Albert ARIBAUDc37980c2013-06-11 14:17:30 +02001141
Masahiro Yamada74241452014-02-24 11:12:09 +09001142env: scripts_basic
Masahiro Yamada3f76e982014-02-04 17:24:38 +09001143 $(Q)$(MAKE) $(build)=tools/$@
Mike Frysinger0358df42010-08-15 00:03:21 -04001144
Masahiro Yamada2887c472014-02-04 17:24:39 +09001145tools-all: HOST_TOOLS_ALL=y
1146tools-all: env tools ;
Mike Frysinger0358df42010-08-15 00:03:21 -04001147
Wolfgang Denk4e53a252006-10-25 00:43:17 +02001148.PHONY : CHANGELOG
1149CHANGELOG:
Ben Warrenb985b5d2006-10-26 14:38:25 -04001150 git log --no-merges U-Boot-1_1_5.. | \
1151 unexpand -a | sed -e 's/\s\s*$$//' > $@
Wolfgang Denk4e53a252006-10-25 00:43:17 +02001152
Harald Welte0a823aa2008-07-09 22:30:30 +08001153include/license.h: tools/bin2header COPYING
Wolfgang Denk0e42ada2010-05-27 23:18:33 +02001154 cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
wdenk7ebf7442002-11-02 23:17:16 +00001155#########################################################################
1156
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001157###
1158# Cleaning is done on three levels.
1159# make clean Delete most generated files
1160# Leave enough to build external modules
1161# make mrproper Delete the current configuration, and all generated files
1162# make distclean Remove editor backup files, patch leftover files and the like
wdenk7ebf7442002-11-02 23:17:16 +00001163
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001164# Directories & files removed with 'make clean'
1165CLEAN_DIRS += $(MODVERDIR)
1166CLEAN_FILES += u-boot.lds include/bmp_logo.h include/bmp_logo_data.h \
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +09001167 board/*/config.tmp board/*/*/config.tmp \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001168 include/autoconf.mk* include/spl-autoconf.mk \
1169 include/tpl-autoconf.mk
Wolfgang Denka6862bc2010-05-27 23:18:36 +02001170
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001171# Directories & files removed with 'make clobber'
1172CLOBBER_DIRS += $(patsubst %,spl/%, $(filter-out Makefile, \
1173 $(shell ls -1 spl 2>/dev/null))) \
1174 tpl
Masahiro Yamada73c8b522014-02-20 17:50:57 +09001175CLOBBER_FILES += u-boot* MLO* SPL System.map nand_spl/u-boot*
Mike Frysinger9f4a4202009-10-01 12:11:54 -04001176
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001177# Directories & files removed with 'make mrproper'
1178MRPROPER_DIRS += include/config include/generated
1179MRPROPER_FILES += .config .config.old \
1180 tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
1181 include/config.h include/config.mk
wdenk7ebf7442002-11-02 23:17:16 +00001182
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001183# clean - Delete most, but leave enough to build external modules
1184#
1185clean: rm-dirs := $(CLEAN_DIRS)
1186clean: rm-files := $(CLEAN_FILES)
wdenk7ebf7442002-11-02 23:17:16 +00001187
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001188clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $f/Makefile),$f))
Andy Fleming734329f2011-11-21 13:40:43 +00001189
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001190clean-dirs := $(addprefix _clean_, $(clean-dirs) doc/DocBook)
wdenk7ebf7442002-11-02 23:17:16 +00001191
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001192PHONY += $(clean-dirs) clean archclean
1193$(clean-dirs):
1194 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1195
1196# TODO: Do not use *.cfgtmp
1197clean: $(clean-dirs)
1198 $(call cmd,rmdirs)
1199 $(call cmd,rmfiles)
1200 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1201 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1202 -o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \
1203 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1204 -o -name '*.symtypes' -o -name 'modules.order' \
1205 -o -name modules.builtin -o -name '.tmp_*.o.*' \
1206 -o -name '*.gcno' \) -type f -print | xargs rm -f
1207 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1208 -path './nand_spl/*' -type l -print | xargs rm -f
1209
1210# clobber
1211#
1212clobber: rm-dirs := $(CLOBBER_DIRS)
1213clobber: rm-files := $(CLOBBER_FILES)
1214
1215PHONY += clobber
wdenk7ebf7442002-11-02 23:17:16 +00001216
Masahiro Yamada73906432014-02-04 17:24:34 +09001217clobber: clean
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001218 $(call cmd,rmdirs)
1219 $(call cmd,rmfiles)
wdenk7ebf7442002-11-02 23:17:16 +00001220
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001221# mrproper - Delete all generated files, including .config
1222#
1223mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
1224mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1225mrproper-dirs := $(addprefix _mrproper_,scripts)
1226
1227PHONY += $(mrproper-dirs) mrproper archmrproper
1228$(mrproper-dirs):
1229 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1230
1231mrproper: clobber $(mrproper-dirs)
1232 $(call cmd,rmdirs)
1233 $(call cmd,rmfiles)
1234 @rm -f arch/*/include/asm/arch arch/*/include/asm/proc
1235
1236# distclean
1237#
1238PHONY += distclean
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001239
1240distclean: mrproper
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001241 @find $(srctree) $(RCS_FIND_IGNORE) \
1242 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1243 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1244 -o -name '.*.rej' \
1245 -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
1246 -type f -print | xargs rm -f
wdenk7ebf7442002-11-02 23:17:16 +00001247
1248backup:
1249 F=`basename $(TOPDIR)` ; cd .. ; \
Ilya Yanokd6b93712010-06-21 18:13:21 +04001250 gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
wdenk7ebf7442002-11-02 23:17:16 +00001251
Masahiro Yamada8fac9c72014-02-05 10:52:50 +09001252
1253# Documentation targets
1254# ---------------------------------------------------------------------------
1255%docs: scripts_basic FORCE
1256 $(Q)$(MAKE) $(build)=scripts build_docproc
1257 $(Q)$(MAKE) $(build)=doc/DocBook $@
1258
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001259# Dummies...
1260PHONY += prepare scripts
1261prepare: ;
1262scripts: ;
Masahiro Yamada9e414032014-02-04 17:24:24 +09001263
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001264endif #ifeq ($(config-targets),1)
1265endif #ifeq ($(mixed-targets),1)
1266
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001267quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
1268 cmd_rmdirs = rm -rf $(rm-dirs)
1269
1270quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
1271 cmd_rmfiles = rm -f $(rm-files)
1272
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001273# read all saved command lines
1274
1275targets := $(wildcard $(sort $(targets)))
1276cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1277
1278ifneq ($(cmd_files),)
1279 $(cmd_files): ; # Do not try to update included dependency files
1280 include $(cmd_files)
1281endif
1282
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001283# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
1284# Usage:
1285# $(Q)$(MAKE) $(clean)=dir
1286clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
1287
Masahiro Yamada9e414032014-02-04 17:24:24 +09001288endif # skip-makefile
1289
1290PHONY += FORCE
1291FORCE:
1292
1293# Declare the contents of the .PHONY variable as phony. We keep that
1294# information in a variable so we can use it in if_changed and friends.
1295.PHONY: $(PHONY)