blob: 90812e92a9dd5865c562d9c160fbd51278bba071 [file] [log] [blame]
Kim Phillips5e918a92008-01-16 00:38:05 -06001/*
2 * Copyright (C) 2007 Freescale Semiconductor, Inc.
3 * Kevin Lam <kevin.lam@freescale.com>
4 * Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation; either version 2 of
9 * the License, or (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
19 * MA 02111-1307 USA
20 */
21
22#ifndef __CONFIG_H
23#define __CONFIG_H
24
25/*
26 * High Level Configuration Options
27 */
28#define CONFIG_E300 1 /* E300 family */
29#define CONFIG_MPC83XX 1 /* MPC83XX family */
30#define CONFIG_MPC837X 1 /* MPC837X CPU specific */
31#define CONFIG_MPC837XERDB 1
32
33#define CONFIG_PCI 1
34
Anton Vorontsov2bd74602008-03-24 17:40:43 +030035#define CONFIG_BOARD_EARLY_INIT_F
Timur Tabi89c77842008-02-08 13:15:55 -060036#define CONFIG_MISC_INIT_R
37
38/*
39 * On-board devices
40 */
41#define CONFIG_TSEC_ENET /* TSEC Ethernet support */
42#define CONFIG_VSC7385_ENET
43
Kim Phillips5e918a92008-01-16 00:38:05 -060044/*
45 * System Clock Setup
46 */
47#ifdef CONFIG_PCISLAVE
48#define CONFIG_83XX_PCICLK 66666667 /* in HZ */
49#else
50#define CONFIG_83XX_CLKIN 66666667 /* in Hz */
51#define CONFIG_83XX_GENERIC_PCI 1
52#endif
53
54#ifndef CONFIG_SYS_CLK_FREQ
55#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
56#endif
57
58/*
59 * Hardware Reset Configuration Word
60 */
61#define CFG_HRCW_LOW (\
62 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
63 HRCWL_DDR_TO_SCB_CLK_1X1 |\
64 HRCWL_SVCOD_DIV_2 |\
65 HRCWL_CSB_TO_CLKIN_5X1 |\
66 HRCWL_CORE_TO_CSB_2X1)
67
68#ifdef CONFIG_PCISLAVE
69#define CFG_HRCW_HIGH (\
70 HRCWH_PCI_AGENT |\
71 HRCWH_PCI1_ARBITER_DISABLE |\
72 HRCWH_CORE_ENABLE |\
73 HRCWH_FROM_0XFFF00100 |\
74 HRCWH_BOOTSEQ_DISABLE |\
75 HRCWH_SW_WATCHDOG_DISABLE |\
76 HRCWH_ROM_LOC_LOCAL_16BIT |\
77 HRCWH_RL_EXT_LEGACY |\
78 HRCWH_TSEC1M_IN_RGMII |\
79 HRCWH_TSEC2M_IN_RGMII |\
80 HRCWH_BIG_ENDIAN |\
81 HRCWH_LDP_CLEAR)
82#else
83#define CFG_HRCW_HIGH (\
84 HRCWH_PCI_HOST |\
85 HRCWH_PCI1_ARBITER_ENABLE |\
86 HRCWH_CORE_ENABLE |\
87 HRCWH_FROM_0X00000100 |\
88 HRCWH_BOOTSEQ_DISABLE |\
89 HRCWH_SW_WATCHDOG_DISABLE |\
90 HRCWH_ROM_LOC_LOCAL_16BIT |\
91 HRCWH_RL_EXT_LEGACY |\
92 HRCWH_TSEC1M_IN_RGMII |\
93 HRCWH_TSEC2M_IN_RGMII |\
94 HRCWH_BIG_ENDIAN |\
95 HRCWH_LDP_CLEAR)
96#endif
97
98/* System performance - define the value i.e. CFG_XXX
99*/
100
101/* Arbiter Configuration Register */
102#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
103#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
104
105/* System Priority Control Regsiter */
106#define CFG_SPCR_TSECEP 3 /* eTSEC1&2 emergency priority (0-3) */
107
108/* System Clock Configuration Register */
109#define CFG_SCCR_TSEC1CM 1 /* eTSEC1 clock mode (0-3) */
110#define CFG_SCCR_TSEC2CM 1 /* eTSEC2 clock mode (0-3) */
111#define CFG_SCCR_SATACM SCCR_SATACM_1 /* SATA1-4 clock mode (0-3) */
112
113/*
114 * System IO Config
115 */
116#define CFG_SICRH 0x08200000
117#define CFG_SICRL 0x00000000
118
119/*
120 * Output Buffer Impedance
121 */
122#define CFG_OBIR 0x30100000
123
124/*
125 * IMMR new address
126 */
127#define CFG_IMMR 0xE0000000
128
129/*
Timur Tabi89c77842008-02-08 13:15:55 -0600130 * Device configurations
131 */
132
133/* Vitesse 7385 */
134
135#ifdef CONFIG_VSC7385_ENET
136
137#define CONFIG_TSEC2
138
139/* The flash address and size of the VSC7385 firmware image */
140#define CONFIG_VSC7385_IMAGE 0xFE7FE000
141#define CONFIG_VSC7385_IMAGE_SIZE 8192
142
143#endif
144
145/*
Kim Phillips5e918a92008-01-16 00:38:05 -0600146 * DDR Setup
147 */
148#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */
149#define CFG_SDRAM_BASE CFG_DDR_BASE
150#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
151#define CFG_DDR_SDRAM_CLK_CNTL 0x03000000
152#define CFG_83XX_DDR_USES_CS0
153
154#define CFG_DDRCDR_VALUE (DDRCDR_DHC_EN | DDRCDR_ODT | DDRCDR_Q_DRN)
155
156#undef CONFIG_DDR_ECC /* support DDR ECC function */
157#undef CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */
158
159#undef CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */
160
161/*
162 * Manually set up DDR parameters
163 */
164#define CFG_DDR_SIZE 256 /* MB */
165#define CFG_DDR_CS0_BNDS 0x0000000f
166#define CFG_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_ODT_WR_ACS \
167 | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
168
169#define CFG_DDR_TIMING_3 0x00000000
170#define CFG_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
171 | (0 << TIMING_CFG0_WRT_SHIFT) \
172 | (0 << TIMING_CFG0_RRT_SHIFT) \
173 | (0 << TIMING_CFG0_WWT_SHIFT) \
174 | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
175 | (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
176 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
177 | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
178 /* 0x00220802 */
179 /* 0x00260802 */ /* DDR400 */
180#define CFG_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \
181 | (9 << TIMING_CFG1_ACTTOPRE_SHIFT) \
182 | (3 << TIMING_CFG1_ACTTORW_SHIFT) \
183 | (7 << TIMING_CFG1_CASLAT_SHIFT) \
184 | (13 << TIMING_CFG1_REFREC_SHIFT) \
185 | (3 << TIMING_CFG1_WRREC_SHIFT) \
186 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
187 | (2 << TIMING_CFG1_WRTORD_SHIFT))
188 /* 0x3935d322 */
189 /* 0x3937d322 */
190#define CFG_DDR_TIMING_2 0x02984cc8
191
192#define CFG_DDR_INTERVAL ((1545 << SDRAM_INTERVAL_REFINT_SHIFT) \
193 | (256 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
194 /* 0x06090100 */
195
196#if defined(CONFIG_DDR_2T_TIMING)
197#define CFG_DDR_SDRAM_CFG (SDRAM_CFG_SREN \
198 | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \
199 | SDRAM_CFG_2T_EN \
200 | SDRAM_CFG_DBW_32)
201#else
202#define CFG_DDR_SDRAM_CFG (SDRAM_CFG_SREN \
203 | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT)
204 /* 0x43000000 */
205#endif
206#define CFG_DDR_SDRAM_CFG2 0x00001000 /* 1 posted refresh */
207#define CFG_DDR_MODE ((0x0440 << SDRAM_MODE_ESD_SHIFT) \
208 | (0x0442 << SDRAM_MODE_SD_SHIFT))
209 /* 0x04400442 */ /* DDR400 */
210#define CFG_DDR_MODE2 0x00000000;
211
212/*
213 * Memory test
214 */
215#undef CFG_DRAM_TEST /* memory test, takes time */
216#define CFG_MEMTEST_START 0x00040000 /* memtest region */
217#define CFG_MEMTEST_END 0x0ef70010
218
219/*
220 * The reserved memory
221 */
222#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
223
224#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
225#define CFG_RAMBOOT
226#else
227#undef CFG_RAMBOOT
228#endif
229
230#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
231#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
232
233/*
234 * Initial RAM Base Address Setup
235 */
236#define CFG_INIT_RAM_LOCK 1
237#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
238#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */
239#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
240#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
241
242/*
243 * Local Bus Configuration & Clock Setup
244 */
245#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_8)
246#define CFG_LBC_LBCR 0x00000000
247
248/*
249 * FLASH on the Local Bus
250 */
251#define CFG_FLASH_CFI /* use the Common Flash Interface */
252#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
253#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
254#define CFG_FLASH_SIZE 8 /* max FLASH size is 32M */
255
256#define CFG_FLASH_EMPTY_INFO /* display empty sectors */
257#define CFG_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */
258
259#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
260#define CFG_LBLAWAR0_PRELIM 0x80000016 /* 8 MB window size */
261
262#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \
263 (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
264 BR_V) /* valid */
265#define CFG_OR0_PRELIM (0xFF800000 /* 8 MByte */ \
266 | OR_GPCM_XACS \
267 | OR_GPCM_SCY_9 \
268 | OR_GPCM_EHTR \
269 | OR_GPCM_EAD)
270 /* 0xFF806FF7 TODO SLOW 8 MB flash size */
271
272#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
273#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */
274
275#undef CFG_FLASH_CHECKSUM
276#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
277#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
278
Anton Vorontsov46a3aee2008-03-24 17:40:23 +0300279/*
280 * NAND Flash on the Local Bus
281 */
282#define CFG_NAND_BASE 0xE0600000 /* 0xE0600000 */
283#define CFG_BR1_PRELIM (CFG_NAND_BASE | \
284 (2 << BR_DECC_SHIFT) | /* Use HW ECC */ \
285 BR_PS_8 | /* Port Size = 8 bit */ \
286 BR_MS_FCM | /* MSEL = FCM */ \
287 BR_V) /* valid */
288#define CFG_OR1_PRELIM (0xFFFF8000 | /* length 32K */ \
289 OR_FCM_CSCT | \
290 OR_FCM_CST | \
291 OR_FCM_CHT | \
292 OR_FCM_SCY_1 | \
293 OR_FCM_TRLX | \
294 OR_FCM_EHTR)
295#define CFG_LBLAWBAR1_PRELIM CFG_NAND_BASE
296#define CFG_LBLAWAR1_PRELIM 0x8000000E /* 32KB */
297
Timur Tabi89c77842008-02-08 13:15:55 -0600298/* Vitesse 7385 */
299
Kim Phillips5e918a92008-01-16 00:38:05 -0600300#define CFG_VSC7385_BASE 0xF0000000
301
Timur Tabi89c77842008-02-08 13:15:55 -0600302#ifdef CONFIG_VSC7385_ENET
303
Kim Phillips5e918a92008-01-16 00:38:05 -0600304#define CFG_BR2_PRELIM 0xf0000801 /* Base address */
305#define CFG_OR2_PRELIM 0xfffe09ff /* 128K bytes*/
306#define CFG_LBLAWBAR2_PRELIM CFG_VSC7385_BASE /* Access Base */
307#define CFG_LBLAWAR2_PRELIM 0x80000010 /* Access Size 128K */
308
Timur Tabi89c77842008-02-08 13:15:55 -0600309#endif
310
Kim Phillips5e918a92008-01-16 00:38:05 -0600311/*
312 * Serial Port
313 */
314#define CONFIG_CONS_INDEX 1
315#undef CONFIG_SERIAL_SOFTWARE_FIFO
316#define CFG_NS16550
317#define CFG_NS16550_SERIAL
318#define CFG_NS16550_REG_SIZE 1
319#define CFG_NS16550_CLK get_bus_freq(0)
320
321#define CFG_BAUDRATE_TABLE \
322 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
323
324#define CFG_NS16550_COM1 (CFG_IMMR+0x4500)
325#define CFG_NS16550_COM2 (CFG_IMMR+0x4600)
326
Anton Vorontsov2bd74602008-03-24 17:40:43 +0300327/* SERDES */
328#define CONFIG_FSL_SERDES
329#define CONFIG_FSL_SERDES1 0xe3000
330#define CONFIG_FSL_SERDES2 0xe3100
331
Kim Phillips5e918a92008-01-16 00:38:05 -0600332/* Use the HUSH parser */
333#define CFG_HUSH_PARSER
334#ifdef CFG_HUSH_PARSER
335#define CFG_PROMPT_HUSH_PS2 "> "
336#endif
337
338/* Pass open firmware flat tree */
339#define CONFIG_OF_LIBFDT 1
340#define CONFIG_OF_BOARD_SETUP 1
Anton Vorontsovaabce7f2008-03-24 17:40:47 +0300341#define CONFIG_OF_STDOUT_VIA_ALIAS 1
Kim Phillips5e918a92008-01-16 00:38:05 -0600342
343/* I2C */
344#define CONFIG_HARD_I2C /* I2C with hardware support */
345#undef CONFIG_SOFT_I2C /* I2C bit-banged */
346#define CONFIG_FSL_I2C
347#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
348#define CFG_I2C_SLAVE 0x7F
349#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */
350#define CFG_I2C_OFFSET 0x3000
351#define CFG_I2C2_OFFSET 0x3100
352
353/*
354 * Config on-board RTC
355 */
356#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
357#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
358
359/*
360 * General PCI
361 * Addresses are mapped 1-1.
362 */
363#define CFG_PCI_MEM_BASE 0x80000000
364#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE
365#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */
366#define CFG_PCI_MMIO_BASE 0x90000000
367#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE
368#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */
Scott Wooda7ba32d2008-03-24 12:44:13 -0500369#define CFG_PCI_IO_BASE 0x00000000
Kim Phillips5e918a92008-01-16 00:38:05 -0600370#define CFG_PCI_IO_PHYS 0xE0300000
371#define CFG_PCI_IO_SIZE 0x100000 /* 1M */
372
373#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE
374#define CFG_PCI_SLV_MEM_BUS 0x00000000
375#define CFG_PCI_SLV_MEM_SIZE 0x80000000
376
377#ifdef CONFIG_PCI
378#define CONFIG_NET_MULTI
379#define CONFIG_PCI_PNP /* do pci plug-and-play */
380
Kim Phillips5e918a92008-01-16 00:38:05 -0600381#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
382#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
383#endif /* CONFIG_PCI */
384
Kim Phillips5e918a92008-01-16 00:38:05 -0600385/*
386 * TSEC
387 */
Timur Tabi89c77842008-02-08 13:15:55 -0600388#ifdef CONFIG_TSEC_ENET
Kim Phillips5e918a92008-01-16 00:38:05 -0600389
Timur Tabi89c77842008-02-08 13:15:55 -0600390#define CONFIG_NET_MULTI
391#define CONFIG_GMII /* MII PHY management */
392
393#define CONFIG_TSEC1
394
395#ifdef CONFIG_TSEC1
396#define CONFIG_HAS_ETH0
Kim Phillips5e918a92008-01-16 00:38:05 -0600397#define CONFIG_TSEC1_NAME "TSEC0"
Timur Tabi89c77842008-02-08 13:15:55 -0600398#define CFG_TSEC1_OFFSET 0x24000
Kim Phillips5e918a92008-01-16 00:38:05 -0600399#define TSEC1_PHY_ADDR 2
Kim Phillips5e918a92008-01-16 00:38:05 -0600400#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
Kim Phillips5e918a92008-01-16 00:38:05 -0600401#define TSEC1_PHYIDX 0
Timur Tabi89c77842008-02-08 13:15:55 -0600402#endif
Kim Phillips5e918a92008-01-16 00:38:05 -0600403
Timur Tabi89c77842008-02-08 13:15:55 -0600404#ifdef CONFIG_TSEC2
405#define CONFIG_HAS_ETH1
406#define CONFIG_TSEC2_NAME "TSEC1"
407#define CFG_TSEC2_OFFSET 0x25000
408#define TSEC2_PHY_ADDR 0x1c
409#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
410#define TSEC2_PHYIDX 0
411#endif
Kim Phillips5e918a92008-01-16 00:38:05 -0600412
413/* Options are: TSEC[0-1] */
414#define CONFIG_ETHPRIME "TSEC0"
415
Timur Tabi89c77842008-02-08 13:15:55 -0600416#endif
417
Kim Phillips5e918a92008-01-16 00:38:05 -0600418/*
419 * Environment
420 */
421#ifndef CFG_RAMBOOT
422 #define CFG_ENV_IS_IN_FLASH 1
423 #define CFG_ENV_ADDR (CFG_MONITOR_BASE+CFG_MONITOR_LEN)
424 #define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for env */
425 #define CFG_ENV_SIZE 0x4000
426#else
427 #define CFG_NO_FLASH 1 /* Flash is not usable now */
428 #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
429 #define CFG_ENV_ADDR (CFG_MONITOR_BASE-0x1000)
430 #define CFG_ENV_SIZE 0x2000
431#endif
432
433#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
434#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
435
436/*
437 * BOOTP options
438 */
439#define CONFIG_BOOTP_BOOTFILESIZE
440#define CONFIG_BOOTP_BOOTPATH
441#define CONFIG_BOOTP_GATEWAY
442#define CONFIG_BOOTP_HOSTNAME
443
444
445/*
446 * Command line configuration.
447 */
448#include <config_cmd_default.h>
449
450#define CONFIG_CMD_PING
451#define CONFIG_CMD_I2C
452#define CONFIG_CMD_MII
453#define CONFIG_CMD_DATE
454
455#if defined(CONFIG_PCI)
456#define CONFIG_CMD_PCI
457#endif
458
459#if defined(CFG_RAMBOOT)
460#undef CONFIG_CMD_ENV
461#undef CONFIG_CMD_LOADS
462#endif
463
464#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
465
466#undef CONFIG_WATCHDOG /* watchdog disabled */
467
468/*
469 * Miscellaneous configurable options
470 */
471#define CFG_LONGHELP /* undef to save memory */
472#define CFG_LOAD_ADDR 0x2000000 /* default load address */
473#define CFG_PROMPT "=> " /* Monitor Command Prompt */
474
475#if defined(CONFIG_CMD_KGDB)
476 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
477#else
478 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
479#endif
480
481#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
482#define CFG_MAXARGS 16 /* max number of command args */
483#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
484#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
485
486/*
487 * For booting Linux, the board info and command line data
488 * have to be in the first 8 MB of memory, since this is
489 * the maximum mapped by the Linux kernel during initialization.
490 */
491#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
492
493/*
494 * Core HID Setup
495 */
496#define CFG_HID0_INIT 0x000000000
497#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK
498#define CFG_HID2 HID2_HBE
499
500/*
501 * MMU Setup
502 */
503
504/* DDR: cache cacheable */
505#define CFG_SDRAM_LOWER CFG_SDRAM_BASE
506#define CFG_SDRAM_UPPER (CFG_SDRAM_BASE + 0x10000000)
507
508#define CFG_IBAT0L (CFG_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE)
509#define CFG_IBAT0U (CFG_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP)
510#define CFG_DBAT0L CFG_IBAT0L
511#define CFG_DBAT0U CFG_IBAT0U
512
513#define CFG_IBAT1L (CFG_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE)
514#define CFG_IBAT1U (CFG_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP)
515#define CFG_DBAT1L CFG_IBAT1L
516#define CFG_DBAT1U CFG_IBAT1U
517
518/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
519#define CFG_IBAT2L (CFG_IMMR | BATL_PP_10 | \
520 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
521#define CFG_IBAT2U (CFG_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
522#define CFG_DBAT2L CFG_IBAT2L
523#define CFG_DBAT2U CFG_IBAT2U
524
525/* L2 Switch: cache-inhibit and guarded */
526#define CFG_IBAT3L (CFG_VSC7385_BASE | BATL_PP_10 | \
527 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
528#define CFG_IBAT3U (CFG_VSC7385_BASE | BATU_BL_128K | BATU_VS | BATU_VP)
529#define CFG_DBAT3L CFG_IBAT3L
530#define CFG_DBAT3U CFG_IBAT3U
531
532/* FLASH: icache cacheable, but dcache-inhibit and guarded */
533#define CFG_IBAT4L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
534#define CFG_IBAT4U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
535#define CFG_DBAT4L (CFG_FLASH_BASE | BATL_PP_10 | \
536 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
537#define CFG_DBAT4U CFG_IBAT4U
538
539/* Stack in dcache: cacheable, no memory coherence */
540#define CFG_IBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_10)
541#define CFG_IBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
542#define CFG_DBAT5L CFG_IBAT5L
543#define CFG_DBAT5U CFG_IBAT5U
544
545#ifdef CONFIG_PCI
546/* PCI MEM space: cacheable */
547#define CFG_IBAT6L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
548#define CFG_IBAT6U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
549#define CFG_DBAT6L CFG_IBAT6L
550#define CFG_DBAT6U CFG_IBAT6U
551/* PCI MMIO space: cache-inhibit and guarded */
552#define CFG_IBAT7L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
553 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
554#define CFG_IBAT7U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
555#define CFG_DBAT7L CFG_IBAT7L
556#define CFG_DBAT7U CFG_IBAT7U
557#else
558#define CFG_IBAT6L (0)
559#define CFG_IBAT6U (0)
560#define CFG_IBAT7L (0)
561#define CFG_IBAT7U (0)
562#define CFG_DBAT6L CFG_IBAT6L
563#define CFG_DBAT6U CFG_IBAT6U
564#define CFG_DBAT7L CFG_IBAT7L
565#define CFG_DBAT7U CFG_IBAT7U
566#endif
567
568/*
569 * Internal Definitions
570 *
571 * Boot Flags
572 */
573#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
574#define BOOTFLAG_WARM 0x02 /* Software reboot */
575
576#if defined(CONFIG_CMD_KGDB)
577#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
578#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
579#endif
580
581/*
582 * Environment Configuration
583 */
584#define CONFIG_ENV_OVERWRITE
585
Timur Tabi89c77842008-02-08 13:15:55 -0600586#ifdef CONFIG_HAS_ETH0
587#define CONFIG_ETHADDR 00:04:9f:ef:04:01
588#endif
589
590#ifdef CONFIG_HAS_ETH1
591#define CONFIG_ETH1ADDR 00:04:9f:ef:04:02
592#endif
Kim Phillips5e918a92008-01-16 00:38:05 -0600593
Anton Vorontsov18e69a32008-03-14 23:20:18 +0300594#define CONFIG_HAS_FSL_DR_USB
595
Kim Phillips5e918a92008-01-16 00:38:05 -0600596#define CONFIG_IPADDR 10.0.0.2
597#define CONFIG_SERVERIP 10.0.0.1
598#define CONFIG_GATEWAYIP 10.0.0.1
599#define CONFIG_NETMASK 255.0.0.0
600#define CONFIG_NETDEV eth1
601
602#define CONFIG_HOSTNAME mpc837x_rdb
603#define CONFIG_ROOTPATH /nfsroot
604#define CONFIG_RAMDISKFILE rootfs.ext2.gz.uboot
605#define CONFIG_BOOTFILE uImage
606#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
Kim Phillips270fe262008-03-07 12:27:31 -0600607#define CONFIG_FDTFILE mpc8379_rdb.dtb
Kim Phillips5e918a92008-01-16 00:38:05 -0600608
609#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
610#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
611#define CONFIG_BAUDRATE 115200
612
613#define XMK_STR(x) #x
614#define MK_STR(x) XMK_STR(x)
615
616#define CONFIG_EXTRA_ENV_SETTINGS \
617 "netdev=" MK_STR(CONFIG_NETDEV) "\0" \
618 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
619 "tftpflash=tftp $loadaddr $uboot;" \
620 "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
621 "erase " MK_STR(TEXT_BASE) " +$filesize; " \
622 "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
623 "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
624 "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
625 "fdtaddr=400000\0" \
626 "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \
627 "ramdiskaddr=1000000\0" \
628 "ramdiskfile=" MK_STR(CONFIG_RAMDISKFILE) "\0" \
629 "console=ttyS0\0" \
630 "setbootargs=setenv bootargs " \
631 "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
632 "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \
633 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
634 "root=$rootdev rw console=$console,$baudrate $othbootargs\0"
635
636#define CONFIG_NFSBOOTCOMMAND \
637 "setenv rootdev /dev/nfs;" \
638 "run setbootargs;" \
639 "run setipargs;" \
640 "tftp $loadaddr $bootfile;" \
641 "tftp $fdtaddr $fdtfile;" \
642 "bootm $loadaddr - $fdtaddr"
643
644#define CONFIG_RAMBOOTCOMMAND \
645 "setenv rootdev /dev/ram;" \
646 "run setbootargs;" \
647 "tftp $ramdiskaddr $ramdiskfile;" \
648 "tftp $loadaddr $bootfile;" \
649 "tftp $fdtaddr $fdtfile;" \
650 "bootm $loadaddr $ramdiskaddr $fdtaddr"
651
652#undef MK_STR
653#undef XMK_STR
654
655#endif /* __CONFIG_H */