blob: 52d8377a1b376eba0c3356611188ff3507433208 [file] [log] [blame]
Michael Wallef214a202012-06-05 11:33:17 +00001/*
2 * Copyright (c) 2012 Michael Walle
3 * Michael Walle <michael@walle.cc>
4 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02005 * SPDX-License-Identifier: GPL-2.0+
Michael Wallef214a202012-06-05 11:33:17 +00006 */
7
8#ifndef _CONFIG_LSXL_H
9#define _CONFIG_LSXL_H
10
11/*
12 * Version number information
13 */
14#if defined(CONFIG_LSCHLV2)
15#define CONFIG_IDENT_STRING " LS-CHLv2"
16#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
17#define CONFIG_MACH_TYPE 3006
18#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
19#elif defined(CONFIG_LSXHL)
20#define CONFIG_IDENT_STRING " LS-XHL"
21#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
22#define CONFIG_MACH_TYPE 2663
23/* CONFIG_SYS_TCLK is 200000000 by default */
24#else
25#error "unknown board"
26#endif
27
28/*
29 * General configuration options
30 */
31#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
32#define CONFIG_KIRKWOOD /* SOC Family Name */
33#define CONFIG_KW88F6281 /* SOC Name */
34
35#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
36#define CONFIG_MISC_INIT_R
37#define CONFIG_SHOW_BOOT_PROGRESS
38
39#define CONFIG_RANDOM_MACADDR
40#define CONFIG_KIRKWOOD_GPIO
41#define CONFIG_OF_LIBFDT
42
43#define CONFIG_SYS_NO_FLASH
44#define CONFIG_SYS_HUSH_PARSER
45#define CONFIG_SYS_CONSOLE_IS_IN_ENV
46#define CONFIG_SYS_CONSOLE_INFO_QUIET
47
48/*
49 * Enable u-boot API for standalone programs.
50 */
51#define CONFIG_API
52
53/*
54 * Commands configuration
55 */
56#include <config_cmd_default.h>
57#define CONFIG_CMD_DHCP
58#define CONFIG_CMD_ELF
59#define CONFIG_CMD_ENV
60#define CONFIG_CMD_EXT2
61#define CONFIG_CMD_FAT
62#define CONFIG_CMD_IDE
63#define CONFIG_CMD_PING
64#define CONFIG_CMD_PING
65#define CONFIG_CMD_SF
66#define CONFIG_CMD_SPI
67#define CONFIG_CMD_USB
68
69#define CONFIG_DOS_PARTITION
70#define CONFIG_EFI_PARTITION
71
72/*
73 * mv-common.h should be defined after CMD configs since it used them
74 * to enable certain macros
75 */
76#include "mv-common.h"
77
78/* ST M25P40 */
79#undef CONFIG_SPI_FLASH_MACRONIX
80#define CONFIG_SPI_FLASH_STMICRO
81#undef CONFIG_ENV_SPI_MAX_HZ
82#define CONFIG_ENV_SPI_MAX_HZ 25000000
83#undef CONFIG_SF_DEFAULT_SPEED
84#define CONFIG_SF_DEFAULT_SPEED 25000000
85
86
87#undef CONFIG_SYS_PROMPT
88#define CONFIG_SYS_PROMPT "=> "
89#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
90
91/*
92 * Environment variables configurations
93 */
94#ifdef CONFIG_SPI_FLASH
95#define CONFIG_SYS_MAX_FLASH_BANKS 1
96#define CONFIG_SYS_MAX_FLASH_SECT 8
97#define CONFIG_ENV_IS_IN_SPI_FLASH 1
98#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */
99#else
100#define CONFIG_ENV_IS_NOWHERE
101#endif
102
103#define CONFIG_ENV_SIZE 0x10000 /* 64k */
104#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
105
106/*
107 * Default environment variables
108 */
109#define CONFIG_LOADADDR 0x00800000
110#define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}"
111#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2"
112#define CONFIG_EXTRA_ENV_SETTINGS \
113 "bootsource=hdd\0" \
114 "hdpart=0:1\0" \
115 "bootcmd_net=bootp 0x00100000 uImage " \
116 "&& tftpboot 0x00800000 uInitrd " \
117 "&& bootm 0x00100000 0x00800000\0" \
118 "bootcmd_hdd=ide reset " \
119 "&& ext2load ide ${hdpart} 0x00100000 /uImage " \
120 "&& ext2load ide ${hdpart} 0x00800000 /uInitrd " \
121 "&& bootm 0x00100000 0x00800000\0" \
122 "bootcmd_usb=usb start " \
123 "&& fatload usb 0:1 0x00100000 /uImage " \
124 "&& fatload usb 0:1 0x00800000 /uInitrd " \
125 "&& bootm 0x00100000 0x00800000\0" \
126 "bootcmd_rescue=run config_nc_dhcp; run nc\0" \
127 "eraseenv=sf probe 0 " \
Marek Vasut5368c552012-09-23 17:41:24 +0200128 "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \
129 " +" __stringify(CONFIG_ENV_SIZE) "\0" \
Michael Wallef214a202012-06-05 11:33:17 +0000130 "config_nc_dhcp=setenv autoload_old ${autoload}; " \
131 "setenv autoload no " \
132 "&& bootp " \
Michael Walle23c99462012-10-04 06:54:25 +0000133 "&& setenv ncip " \
Michael Wallef214a202012-06-05 11:33:17 +0000134 "&& setenv autoload ${autoload_old}; " \
135 "setenv autoload_old\0" \
136 "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
137 "setenv ncip; setenv gatewayip; setenv ethact; " \
138 "setenv bootfile; setenv dnsip; " \
139 "setenv bootsource hdd; run ser\0" \
140 "restore_env=run standard_env; saveenv; reset\0" \
141 "ser=setenv stdin serial; setenv stdout serial; " \
142 "setenv stderr serial\0" \
143 "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \
144 "stdin=serial\0" \
145 "stdout=serial\0" \
146 "stderr=serial\0"
147
148/*
149 * Ethernet Driver configuration
150 */
151#ifdef CONFIG_CMD_NET
152#define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */
153#define CONFIG_PHY_BASE_ADR 7
154#undef CONFIG_RESET_PHY_R
155#endif /* CONFIG_CMD_NET */
156
157#ifdef CONFIG_CMD_IDE
158#undef CONFIG_IDE_LED
159#undef CONFIG_SYS_IDE_MAXBUS
160#define CONFIG_SYS_IDE_MAXBUS 1
161#undef CONFIG_SYS_IDE_MAXDEVICE
162#define CONFIG_SYS_IDE_MAXDEVICE 1
163#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
164#endif
165
166#endif /* _CONFIG_LSXL_H */