blob: 0538821b5cfe31696193efac42061b2f68ecd0bd [file] [log] [blame]
Tom Rini99060902014-11-10 16:19:51 -05001VERSION = 2015
Tom Rini112db942015-02-02 12:39:29 -05002PATCHLEVEL = 04
Wolfgang Denk211e4752012-07-10 09:21:12 +02003SUBLEVEL =
Tom Rini112db942015-02-02 12:39:29 -05004EXTRAVERSION = -rc1
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +09005NAME =
Wolfgang Denkae6d1052008-01-13 00:59:21 +01006
Masahiro Yamada6825a952014-02-04 17:24:28 +09007# *DOCUMENTATION*
8# To see a list of typical targets execute "make help"
9# More info can be located in ./README
10# Comments in this file are targeted only to the developer, do not
11# expect to learn how to build the kernel reading this file.
12
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090013# Do not use make's built-in rules and variables
14# (this increases performance and avoids hard-to-debug behaviour);
15MAKEFLAGS += -rR
Masahiro Yamada6825a952014-02-04 17:24:28 +090016
17# Avoid funny character set dependencies
18unexport LC_ALL
19LC_COLLATE=C
20LC_NUMERIC=C
21export LC_COLLATE LC_NUMERIC
22
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090023# Avoid interference with shell env settings
24unexport GREP_OPTIONS
25
Masahiro Yamada6825a952014-02-04 17:24:28 +090026# We are using a recursive build, so we need to do a little thinking
27# to get the ordering right.
28#
29# Most importantly: sub-Makefiles should only ever modify files in
30# their own directory. If in some directory we have a dependency on
31# a file in another dir (which doesn't happen often, but it's often
32# unavoidable when linking the built-in.o targets which finally
33# turn into vmlinux), we will call a sub make in that other dir, and
34# after that we are sure that everything which is in that other dir
35# is now up to date.
36#
37# The only cases where we need to modify files which have global
38# effects are thus separated out and done before the recursive
39# descending is started. They are now explicitly listed as the
40# prepare rule.
41
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090042# Beautify output
43# ---------------------------------------------------------------------------
44#
45# Normally, we echo the whole command before executing it. By making
46# that echo $($(quiet)$(cmd)), we now have the possibility to set
47# $(quiet) to choose other forms of output instead, e.g.
48#
49# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
50# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
51#
52# If $(quiet) is empty, the whole command will be printed.
53# If it is set to "quiet_", only the short version will be printed.
54# If it is set to "silent_", nothing will be printed at all, since
55# the variable $(silent_cmd_cc_o_c) doesn't exist.
56#
57# A simple variant is to prefix commands with $(Q) - that's useful
58# for commands that shall be hidden in non-verbose mode.
59#
60# $(Q)ln $@ :<
61#
62# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
63# If KBUILD_VERBOSE equals 1 then the above command is displayed.
64#
Masahiro Yamada6825a952014-02-04 17:24:28 +090065# To put more focus on warnings, be less verbose as default
66# Use 'make V=1' to see the full commands
67
68ifeq ("$(origin V)", "command line")
69 KBUILD_VERBOSE = $(V)
wdenk7ebf7442002-11-02 23:17:16 +000070endif
Masahiro Yamada6825a952014-02-04 17:24:28 +090071ifndef KBUILD_VERBOSE
72 KBUILD_VERBOSE = 0
73endif
74
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090075ifeq ($(KBUILD_VERBOSE),1)
76 quiet =
77 Q =
78else
79 quiet=quiet_
80 Q = @
Masahiro Yamada6825a952014-02-04 17:24:28 +090081endif
82
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090083# If the user is running make -s (silent mode), suppress echoing of
84# commands
85
86ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
87ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
88 quiet=silent_
89endif
90else # make-3.8x
91ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
92 quiet=silent_
93endif
Masahiro Yamada6825a952014-02-04 17:24:28 +090094endif
95
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090096export quiet Q KBUILD_VERBOSE
Masahiro Yamada6825a952014-02-04 17:24:28 +090097
Masahiro Yamada9e414032014-02-04 17:24:24 +090098# kbuild supports saving output files in a separate directory.
99# To locate output files in a separate directory two syntaxes are supported.
100# In both cases the working directory must be the root of the kernel src.
101# 1) O=
102# Use "make O=dir/to/store/output/files/"
Marian Balakowiczf9328632006-09-01 19:49:50 +0200103#
Masahiro Yamada9e414032014-02-04 17:24:24 +0900104# 2) Set KBUILD_OUTPUT
105# Set the environment variable KBUILD_OUTPUT to point to the directory
106# where the output files shall be placed.
107# export KBUILD_OUTPUT=dir/to/store/output/files/
108# make
Stefan Roese887e2ec2006-09-07 11:51:23 +0200109#
Masahiro Yamada9e414032014-02-04 17:24:24 +0900110# The O= assignment takes precedence over the KBUILD_OUTPUT environment
111# variable.
wdenk7ebf7442002-11-02 23:17:16 +0000112
Masahiro Yamada9e414032014-02-04 17:24:24 +0900113# KBUILD_SRC is set on invocation of make in OBJ directory
114# KBUILD_SRC is not intended to be used by the regular user (for now)
115ifeq ($(KBUILD_SRC),)
116
117# OK, Make called in directory where kernel src resides
118# Do we want to locate output files in a separate directory?
Marian Balakowiczf9328632006-09-01 19:49:50 +0200119ifeq ("$(origin O)", "command line")
Masahiro Yamada9e414032014-02-04 17:24:24 +0900120 KBUILD_OUTPUT := $(O)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200121endif
wdenk7ebf7442002-11-02 23:17:16 +0000122
Masahiro Yamada9e414032014-02-04 17:24:24 +0900123# That's our default target when none is given on the command line
124PHONY := _all
125_all:
126
127# Cancel implicit rules on top Makefile
128$(CURDIR)/Makefile Makefile: ;
129
130ifneq ($(KBUILD_OUTPUT),)
131# Invoke a second make in the output directory, passing relevant variables
132# check that the output directory actually exists
133saved-output := $(KBUILD_OUTPUT)
Masahiro Yamada5a449d72014-03-24 13:55:27 +0900134KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
135 && /bin/pwd)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900136$(if $(KBUILD_OUTPUT),, \
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900137 $(error failed to create output directory "$(saved-output)"))
Masahiro Yamada9e414032014-02-04 17:24:24 +0900138
139PHONY += $(MAKECMDGOALS) sub-make
140
141$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
142 @:
143
144sub-make: FORCE
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900145 $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
146 -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
Masahiro Yamada9e414032014-02-04 17:24:24 +0900147
148# Leave processing to above invocation of make
149skip-makefile := 1
150endif # ifneq ($(KBUILD_OUTPUT),)
151endif # ifeq ($(KBUILD_SRC),)
152
153# We process the rest of the Makefile if this is the final invocation of make
154ifeq ($(skip-makefile),)
155
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900156# Do not print "Entering directory ...",
157# but we want to display it when entering to the output directory
158# so that IDEs/editors are able to understand relative filenames.
159MAKEFLAGS += --no-print-directory
160
161# Call a source code checker (by default, "sparse") as part of the
162# C compilation.
163#
164# Use 'make C=1' to enable checking of only re-compiled files.
165# Use 'make C=2' to enable checking of *all* source files, regardless
166# of whether they are re-compiled or not.
167#
168# See the file "Documentation/sparse.txt" for more details, including
169# where to get the "sparse" utility.
170
171ifeq ("$(origin C)", "command line")
172 KBUILD_CHECKSRC = $(C)
173endif
174ifndef KBUILD_CHECKSRC
175 KBUILD_CHECKSRC = 0
176endif
177
178# Use make M=dir to specify directory of external module to build
179# Old syntax make ... SUBDIRS=$PWD is still supported
180# Setting the environment variable KBUILD_EXTMOD take precedence
181ifdef SUBDIRS
182 KBUILD_EXTMOD ?= $(SUBDIRS)
183endif
184
185ifeq ("$(origin M)", "command line")
186 KBUILD_EXTMOD := $(M)
187endif
188
Masahiro Yamada6825a952014-02-04 17:24:28 +0900189# If building an external module we do not care about the all: rule
190# but instead _all depend on modules
Masahiro Yamada9e414032014-02-04 17:24:24 +0900191PHONY += all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900192ifeq ($(KBUILD_EXTMOD),)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900193_all: all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900194else
195_all: modules
196endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900197
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900198ifeq ($(KBUILD_SRC),)
199 # building in the source tree
200 srctree := .
201else
202 ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
203 # building in a subdirectory of the source tree
204 srctree := ..
205 else
206 srctree := $(KBUILD_SRC)
207 endif
208endif
209objtree := .
Masahiro Yamada9e414032014-02-04 17:24:24 +0900210src := $(srctree)
211obj := $(objtree)
212
213VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
214
215export srctree objtree VPATH
216
Wolfgang Denk5013c092008-03-02 22:45:33 +0100217# Make sure CDPATH settings don't interfere
218unexport CDPATH
219
Marian Balakowiczf9328632006-09-01 19:49:50 +0200220#########################################################################
221
wdenk7ebf7442002-11-02 23:17:16 +0000222HOSTARCH := $(shell uname -m | \
223 sed -e s/i.86/x86/ \
224 -e s/sun4u/sparc64/ \
225 -e s/arm.*/arm/ \
226 -e s/sa110/arm/ \
227 -e s/ppc64/powerpc/ \
228 -e s/ppc/powerpc/ \
229 -e s/macppc/powerpc/\
230 -e s/sh.*/sh/)
231
232HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
233 sed -e 's/\(cygwin\).*/cygwin/')
234
235export HOSTARCH HOSTOS
236
wdenk7ebf7442002-11-02 23:17:16 +0000237#########################################################################
Marian Balakowiczf9328632006-09-01 19:49:50 +0200238
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400239# set default to nothing for native builds
Wolfgang Denka5284ef2007-03-06 18:01:47 +0100240ifeq ($(HOSTARCH),$(ARCH))
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400241CROSS_COMPILE ?=
wdenk7ebf7442002-11-02 23:17:16 +0000242endif
wdenk7ebf7442002-11-02 23:17:16 +0000243
Masahiro Yamada51148792014-07-30 14:08:17 +0900244KCONFIG_CONFIG ?= .config
245export KCONFIG_CONFIG
246
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900247# SHELL used by kbuild
248CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
249 else if [ -x /bin/bash ]; then echo /bin/bash; \
250 else echo sh; fi ; fi)
251
Jeroen Hofsteeb477fe42014-09-10 20:08:51 +0200252HOSTCC = cc
253HOSTCXX = c++
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900254HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900255HOSTCXXFLAGS = -O2
256
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900257ifeq ($(HOSTOS),cygwin)
258HOSTCFLAGS += -ansi
259endif
260
261# Mac OS X / Darwin's C preprocessor is Apple specific. It
262# generates numerous errors and warnings. We want to bypass it
263# and use GNU C's cpp. To do this we pass the -traditional-cpp
264# option to the compiler. Note that the -traditional-cpp flag
265# DOES NOT have the same semantics as GNU C's flag, all it does
266# is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
267#
268# Apple's linker is similar, thanks to the new 2 stage linking
269# multiple symbol definitions are treated as errors, hence the
270# -multiply_defined suppress option to turn off this error.
271#
272ifeq ($(HOSTOS),darwin)
273# get major and minor product version (e.g. '10' and '6' for Snow Leopard)
274DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
275DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
276
277os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
278 $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
279
280# Snow Leopards build environment has no longer restrictions as described above
281HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
282HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
283HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
Andreas Bießmann1fddd7b2015-02-09 00:06:10 +0100284
285# since Lion (10.7) ASLR is on by default, but we use linker generated lists
286# in some host tools which is a problem then ... so disable ASLR for these
287# tools
288HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900289endif
290
Masahiro Yamada6825a952014-02-04 17:24:28 +0900291# Decide whether to build built-in, modular, or both.
292# Normally, just do built-in.
293
294KBUILD_MODULES :=
295KBUILD_BUILTIN := 1
296
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900297# If we have only "make modules", don't compile built-in objects.
298# When we're building modules with modversions, we need to consider
299# the built-in objects during the descend as well, in order to
300# make sure the checksums are up to date before we record them.
Masahiro Yamada6825a952014-02-04 17:24:28 +0900301
302ifeq ($(MAKECMDGOALS),modules)
303 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
304endif
305
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900306# If we have "make <whatever> modules", compile modules
307# in addition to whatever we do anyway.
308# Just "make" or "make all" shall build modules as well
Masahiro Yamada6825a952014-02-04 17:24:28 +0900309
310# U-Boot does not need modules
311#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
312# KBUILD_MODULES := 1
313#endif
314
315#ifeq ($(MAKECMDGOALS),)
316# KBUILD_MODULES := 1
317#endif
318
319export KBUILD_MODULES KBUILD_BUILTIN
320export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
321
Masahiro Yamada9e414032014-02-04 17:24:24 +0900322# Look for make include files relative to root of kernel src
323MAKEFLAGS += --include-dir=$(srctree)
324
Masahiro Yamadabf4b3de2014-02-04 17:24:18 +0900325# We need some generic definitions (do not try to remake the file).
326$(srctree)/scripts/Kbuild.include: ;
327include $(srctree)/scripts/Kbuild.include
328
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900329# Make variables (CC, etc...)
330
331AS = $(CROSS_COMPILE)as
332# Always use GNU ld
333ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
334LD = $(CROSS_COMPILE)ld.bfd
335else
336LD = $(CROSS_COMPILE)ld
337endif
338CC = $(CROSS_COMPILE)gcc
339CPP = $(CC) -E
340AR = $(CROSS_COMPILE)ar
341NM = $(CROSS_COMPILE)nm
342LDR = $(CROSS_COMPILE)ldr
343STRIP = $(CROSS_COMPILE)strip
344OBJCOPY = $(CROSS_COMPILE)objcopy
345OBJDUMP = $(CROSS_COMPILE)objdump
346AWK = awk
Masahiro Yamadaf77d7092014-05-12 11:45:55 +0900347PERL = perl
Masahiro Yamada51148792014-07-30 14:08:17 +0900348PYTHON = python
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900349DTC = dtc
350CHECK = sparse
351
352CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
353 -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
354
Masahiro Yamada3b612972014-08-31 15:16:53 +0900355KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900356
357KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
358 -Wno-format-security \
359 -fno-builtin -ffreestanding
360KBUILD_AFLAGS := -D__ASSEMBLY__
361
Masahiro Yamada74241452014-02-24 11:12:09 +0900362# Read UBOOTRELEASE from include/config/uboot.release (if it exists)
363UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
364UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +0900365
Masahiro Yamada74241452014-02-24 11:12:09 +0900366export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900367export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900368export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
369export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
Masahiro Yamada51148792014-07-30 14:08:17 +0900370export MAKE AWK PERL PYTHON
Masahiro Yamada15c939f2014-06-06 10:15:27 +0900371export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900372
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900373export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900374export KBUILD_CFLAGS KBUILD_AFLAGS
375
Masahiro Yamada6825a952014-02-04 17:24:28 +0900376# When compiling out-of-tree modules, put MODVERDIR in the module
377# tree rather than in the kernel tree. The kernel tree might
378# even be read-only.
379export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
380
381# Files to ignore in find ... statements
382
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900383export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
384 -name CVS -o -name .pc -o -name .hg -o -name .git \) \
385 -prune -o
Masahiro Yamada6825a952014-02-04 17:24:28 +0900386export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
387 --exclude CVS --exclude .pc --exclude .hg --exclude .git
388
389# ===========================================================================
390# Rules shared between *config targets and build targets
391
392# Basic helpers built in scripts/
393PHONY += scripts_basic
394scripts_basic:
395 $(Q)$(MAKE) $(build)=scripts/basic
396 $(Q)rm -f .tmp_quiet_recordmcount
397
398# To avoid any implicit rule to kick in, define an empty command.
399scripts/basic/%: scripts_basic ;
400
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900401PHONY += outputmakefile
402# outputmakefile generates a Makefile in the output directory, if using a
403# separate output directory. This allows convenient use of make in the
404# output directory.
405outputmakefile:
406ifneq ($(KBUILD_SRC),)
407 $(Q)ln -fsn $(srctree) source
408 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
409 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
410endif
411
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900412# To make sure we do not include .config for any of the *config targets
413# catch them early, and hand them over to scripts/kconfig/Makefile
414# It is allowed to specify more targets when calling make, including
415# mixing *config targets and build targets.
416# For example 'make oldconfig all'.
417# Detect when mixed targets is specified, and make a second invocation
418# of make so .config is not included in this case either (for *config).
Masahiro Yamada6825a952014-02-04 17:24:28 +0900419
Masahiro Yamada74241452014-02-24 11:12:09 +0900420version_h := include/generated/version_autogenerated.h
421timestamp_h := include/generated/timestamp_autogenerated.h
422
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900423no-dot-config-targets := clean clobber mrproper distclean \
Masahiro Yamada27651182014-02-21 15:45:11 +0900424 help %docs check% coccicheck \
Tom Rinic7ad5cb2014-10-13 08:38:55 -0400425 ubootversion backup
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900426
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900427config-targets := 0
428mixed-targets := 0
429dot-config := 1
430
431ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
432 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
433 dot-config := 0
434 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900435endif
436
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900437ifeq ($(KBUILD_EXTMOD),)
438 ifneq ($(filter config %config,$(MAKECMDGOALS)),)
439 config-targets := 1
440 ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
441 mixed-targets := 1
442 endif
443 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900444endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900445
446ifeq ($(mixed-targets),1)
447# ===========================================================================
448# We're called with mixed targets (*config and build targets).
449# Handle them one by one.
450
Masahiro Yamadae7734402014-08-05 15:56:44 +0900451PHONY += $(MAKECMDGOALS) __build_one_by_one
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900452
Masahiro Yamadae7734402014-08-05 15:56:44 +0900453$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900454 @:
455
Masahiro Yamadae7734402014-08-05 15:56:44 +0900456__build_one_by_one:
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900457 $(Q)set -e; \
458 for i in $(MAKECMDGOALS); do \
459 $(MAKE) -f $(srctree)/Makefile $$i; \
460 done
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900461
462else
463ifeq ($(config-targets),1)
464# ===========================================================================
465# *config targets only - make sure prerequisites are updated, and descend
466# in scripts/kconfig to make the *config target
467
Masahiro Yamada51148792014-07-30 14:08:17 +0900468KBUILD_DEFCONFIG := sandbox_defconfig
469export KBUILD_DEFCONFIG KBUILD_KCONFIG
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900470
Masahiro Yamada51148792014-07-30 14:08:17 +0900471config: scripts_basic outputmakefile FORCE
Masahiro Yamadaf458e352014-09-04 05:41:34 +0900472 +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/multiconfig.sh $@
Masahiro Yamada51148792014-07-30 14:08:17 +0900473
474%config: scripts_basic outputmakefile FORCE
Masahiro Yamada3ff291f2014-08-21 11:44:34 +0900475 +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/multiconfig.sh $@
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900476
477else
478# ===========================================================================
479# Build targets only - this includes vmlinux, arch specific targets, clean
480# targets and others. In general all targets except *config targets.
481
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900482ifeq ($(dot-config),1)
483# Read in config
Masahiro Yamada51148792014-07-30 14:08:17 +0900484-include include/config/auto.conf
485
486# Read in dependencies to all Kconfig* files, make sure to run
487# oldconfig if changes are detected.
488-include include/config/auto.conf.cmd
489
490# To avoid any implicit rule to kick in, define an empty command
491$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
492
493# If .config is newer than include/config/auto.conf, someone tinkered
494# with it and forgot to run make oldconfig.
495# if auto.conf.cmd is missing then we are probably in a cleaned tree so
496# we execute the config step to be sure to catch updated Kconfig files
497include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
498 $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
499
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900500-include include/autoconf.mk
501-include include/autoconf.mk.dep
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900502
Masahiro Yamada51148792014-07-30 14:08:17 +0900503# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
504# is up-to-date. When we switch to a different board configuration, old CONFIG
505# macros are still remaining in include/config/auto.conf. Without the following
506# gimmick, wrong config.mk would be included leading nasty warnings/errors.
507autoconf_is_current := $(if $(wildcard $(KCONFIG_CONFIG)),$(shell find . \
508 -path ./include/config/auto.conf -newer $(KCONFIG_CONFIG)))
509ifneq ($(autoconf_is_current),)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900510include $(srctree)/config.mk
Daniel Schwierzecke19db552014-11-21 23:51:33 +0100511include $(srctree)/arch/$(ARCH)/Makefile
Masahiro Yamadaced07152014-02-04 17:24:21 +0900512endif
Simon Glassfada9e22013-04-20 08:42:36 +0000513
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000514# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
515# that (or fail if absent). Otherwise, search for a linker script in a
516# standard location.
517
518ifndef LDSCRIPT
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900519 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000520 ifdef CONFIG_SYS_LDSCRIPT
521 # need to strip off double quotes
Masahiro Yamada4a377552014-02-25 19:26:48 +0900522 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000523 endif
524endif
525
Simon Glassee601972011-11-21 10:49:37 +0000526# If there is no specified link script, we look in a number of places for it
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000527ifndef LDSCRIPT
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000528 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900529 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000530 endif
531 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900532 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000533 endif
534 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900535 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
Simon Glassee601972011-11-21 10:49:37 +0000536 endif
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000537endif
538
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900539else
Masahiro Yamada51148792014-07-30 14:08:17 +0900540# Dummy target needed, because used as prerequisite
541include/config/auto.conf: ;
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900542endif # $(dot-config)
543
Masahiro Yamada4a8ed8e2014-08-22 19:42:29 +0900544ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
545KBUILD_CFLAGS += -Os
546else
547KBUILD_CFLAGS += -O2
548endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900549
550ifdef BUILD_TAG
551KBUILD_CFLAGS += -DBUILD_TAG='"$(BUILD_TAG)"'
552endif
553
554KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
555
556KBUILD_CFLAGS += -g
557# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
558# option to the assembler.
559KBUILD_AFLAGS += -g
560
561# Report stack usage if supported
Masahiro Yamada5b1f1f42013-12-11 20:11:34 +0900562ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
563 KBUILD_CFLAGS += -fstack-usage
564endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900565
566KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
567
568# turn jbsr into jsr for m68k
569ifeq ($(ARCH),m68k)
570ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
571KBUILD_AFLAGS += -Wa,-gstabs,-S
572endif
573endif
574
Masahiro Yamada65bb6d82014-04-18 19:09:51 +0900575# Prohibit date/time macros, which would make the build non-deterministic
576KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
577
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900578ifneq ($(CONFIG_SYS_TEXT_BASE),)
579KBUILD_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
580endif
581
582export CONFIG_SYS_TEXT_BASE
583
Masahiro Yamada6419e142014-08-05 15:56:43 +0900584include $(srctree)/scripts/Makefile.extrawarn
585
Masahiro Yamada0e6256d2014-04-15 14:47:40 +0900586# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
587KBUILD_CPPFLAGS += $(KCPPFLAGS)
588KBUILD_AFLAGS += $(KAFLAGS)
589KBUILD_CFLAGS += $(KCFLAGS)
590
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900591# Use UBOOTINCLUDE when you must reference the include/ directory.
592# Needed to be compatible with the O= option
Masahiro Yamadaf5c66bd2014-03-11 11:05:18 +0900593UBOOTINCLUDE := \
594 -Iinclude \
595 $(if $(KBUILD_SRC), -I$(srctree)/include) \
Masahiro Yamada51148792014-07-30 14:08:17 +0900596 -I$(srctree)/arch/$(ARCH)/include \
597 -include $(srctree)/include/linux/kconfig.h
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900598
599NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
600CHECKFLAGS += $(NOSTDINC_FLAGS)
601
602# FIX ME
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900603cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
604 $(NOSTDINC_FLAGS)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900605c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
606
wdenk7ebf7442002-11-02 23:17:16 +0000607#########################################################################
608# U-Boot objects....order is important (i.e. start must be first)
609
Masahiro Yamada9e414032014-02-04 17:24:24 +0900610HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200611
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900612libs-y += lib/
613libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900614libs-$(CONFIG_OF_EMBED) += dts/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900615libs-y += fs/
616libs-y += net/
617libs-y += disk/
618libs-y += drivers/
619libs-y += drivers/dma/
620libs-y += drivers/gpio/
621libs-y += drivers/i2c/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900622libs-y += drivers/mmc/
623libs-y += drivers/mtd/
624libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
625libs-y += drivers/mtd/onenand/
626libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
627libs-y += drivers/mtd/spi/
628libs-y += drivers/net/
629libs-y += drivers/net/phy/
630libs-y += drivers/pci/
631libs-y += drivers/power/ \
Masahiro Yamadae2906a52013-11-11 14:36:00 +0900632 drivers/power/fuel_gauge/ \
633 drivers/power/mfd/ \
634 drivers/power/pmic/ \
635 drivers/power/battery/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900636libs-y += drivers/spi/
637libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
638libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
639libs-y += drivers/serial/
640libs-y += drivers/usb/eth/
641libs-y += drivers/usb/gadget/
642libs-y += drivers/usb/host/
643libs-y += drivers/usb/musb/
644libs-y += drivers/usb/musb-new/
645libs-y += drivers/usb/phy/
646libs-y += drivers/usb/ulpi/
647libs-y += common/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900648libs-$(CONFIG_API) += api/
649libs-$(CONFIG_HAS_POST) += post/
650libs-y += test/
Simon Glass2e7d35d2014-02-26 15:59:21 -0700651libs-y += test/dm/
Marian Balakowiczf9328632006-09-01 19:49:50 +0200652
Masahiro Yamada33a02da2014-03-03 19:03:17 +0900653libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
Masahiro Yamada08e39a82013-11-11 14:35:55 +0900654
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900655libs-y := $(sort $(libs-y))
656
657u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
658
659u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
660
661libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
662
663u-boot-init := $(head-y)
664u-boot-main := $(libs-y)
665
wdenka8c7c702003-12-06 19:49:23 +0000666
wdenk4f7cb082003-09-11 23:06:34 +0000667# Add GCC lib
Masahiro Yamadacd2e46c2014-03-05 16:59:38 +0900668ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
Masahiro Yamadaa86cf892014-02-27 22:40:34 +0900669PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200670else
Masahiro Yamada6825a952014-02-04 17:24:28 +0900671PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200672endif
673PLATFORM_LIBS += $(PLATFORM_LIBGCC)
674export PLATFORM_LIBS
Alexey Brodkine75e73d2014-05-16 12:54:17 +0400675export PLATFORM_LIBGCC
wdenk3d3befa2004-03-14 15:06:13 +0000676
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400677# Special flags for CPP when processing the linker script.
678# Pass the version down so we can handle backwards compatibility
679# on the fly.
680LDPPFLAGS += \
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900681 -include $(srctree)/include/u-boot/u-boot.lds.h \
Simon Glass7e6403a2011-11-21 10:49:40 +0000682 -DCPUDIR=$(CPUDIR) \
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400683 $(shell $(LD) --version | \
684 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
685
wdenk7ebf7442002-11-02 23:17:16 +0000686#########################################################################
wdenkbdccc4f2003-08-05 17:43:17 +0000687#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +0000688
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400689ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
690BOARD_SIZE_CHECK = \
691 @actual=`wc -c $@ | awk '{print $$1}'`; \
Joe Hershbergerd060e6f2012-11-08 10:19:09 +0000692 limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400693 if test $$actual -gt $$limit; then \
Joe Hershbergerd060e6f2012-11-08 10:19:09 +0000694 echo "$@ exceeds file size limit:" >&2 ; \
695 echo " limit: $$limit bytes" >&2 ; \
696 echo " actual: $$actual bytes" >&2 ; \
697 echo " excess: $$((actual - limit)) bytes" >&2; \
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400698 exit 1; \
699 fi
700else
701BOARD_SIZE_CHECK =
702endif
703
Scott Wood8137af12013-12-14 11:47:32 +0800704# Statically apply RELA-style relocations (currently arm64 only)
705ifneq ($(CONFIG_STATIC_RELA),)
706# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
707DO_STATIC_RELA = \
708 start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
709 end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
Masahiro Yamada9e414032014-02-04 17:24:24 +0900710 tools/relocate-rela $(2) $(3) $$start $$end
Scott Wood8137af12013-12-14 11:47:32 +0800711else
712DO_STATIC_RELA =
713endif
714
Mike Frysinger3e883372009-06-15 00:25:19 -0400715# Always append ALL so that arch config.mk's can add custom ones
Simon Glass89742922014-06-02 22:04:47 -0600716ALL-y += u-boot.srec u-boot.bin System.map binary_size_check
Haiying Wange935a372011-01-27 09:44:59 -0500717
Masahiro Yamada9e414032014-02-04 17:24:24 +0900718ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530719ifeq ($(CONFIG_SPL_FSL_PBL),y)
720ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
721else
Masahiro Yamada9e414032014-02-04 17:24:24 +0900722ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530723endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900724ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
725ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
726ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
Masahiro Yamada0d1e8aa2014-02-21 15:34:30 +0900727ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb u-boot-dtb.bin
Masahiro Yamada2405d092014-05-15 20:37:51 +0900728ifeq ($(CONFIG_SPL_FRAMEWORK),y)
729ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
730endif
Simon Glass714a5622014-02-26 15:59:14 -0700731ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000732ifneq ($(CONFIG_SPL_TARGET),)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900733ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000734endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900735ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
wdenk7ebf7442002-11-02 23:17:16 +0000736
Simon Glasseea0f112015-01-27 22:13:32 -0700737ifneq ($(BUILD_ROM),)
738ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
739endif
Simon Glassfce7b272014-11-12 22:42:08 -0700740
Allen Martin12b7b702012-08-31 08:30:12 +0000741# enable combined SPL/u-boot/dtb rules for tegra
Tom Warren6d6c0ba2012-12-11 13:34:17 +0000742ifneq ($(CONFIG_TEGRA),)
Vidya Sagar7dcd3a22013-10-31 14:51:38 +0530743ifeq ($(CONFIG_SPL),y)
Allen Martin12b7b702012-08-31 08:30:12 +0000744ifeq ($(CONFIG_OF_SEPARATE),y)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900745ALL-y += u-boot-dtb-tegra.bin
Allen Martin12b7b702012-08-31 08:30:12 +0000746else
Masahiro Yamada9e414032014-02-04 17:24:24 +0900747ALL-y += u-boot-nodtb-tegra.bin
Allen Martin12b7b702012-08-31 08:30:12 +0000748endif
749endif
Vidya Sagar7dcd3a22013-10-31 14:51:38 +0530750endif
Allen Martin12b7b702012-08-31 08:30:12 +0000751
Stefan Roeseb2b8a692014-10-22 12:13:24 +0200752# Add optional build target if defined in board/cpu/soc headers
753ifneq ($(CONFIG_BUILD_TARGET),)
754ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
755endif
756
Masahiro Yamadaad0fed42014-02-24 11:12:18 +0900757LDFLAGS_u-boot += $(LDFLAGS_FINAL)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900758ifneq ($(CONFIG_SYS_TEXT_BASE),)
759LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
760endif
Masahiro Yamada71f84ef2013-10-17 17:34:53 +0900761
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900762quiet_cmd_objcopy = OBJCOPY $@
763cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
764
Marek Vasutb97241b2014-03-14 05:00:14 +0100765quiet_cmd_mkimage = MKIMAGE $@
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900766cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
767 $(if $(KBUILD_VERBOSE:1=), >/dev/null)
768
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +0900769quiet_cmd_cat = CAT $@
770cmd_cat = cat $(filter-out $(PHONY), $^) > $@
771
Masahiro Yamada982a1192014-02-24 11:12:17 +0900772append = cat $(filter-out $< $(PHONY), $^) >> $@
773
774quiet_cmd_pad_cat = CAT $@
775cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
776
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900777all: $(ALL-y)
Masahiro Yamada5add2932014-11-07 03:32:07 +0900778ifneq ($(CONFIG_SYS_GENERIC_BOARD),y)
779 @echo "===================== WARNING ======================"
780 @echo "Please convert this board to generic board."
781 @echo "Otherwise it will be removed by the end of 2014."
782 @echo "See doc/README.generic-board for further information"
783 @echo "===================================================="
784endif
Simon Glass73845352015-01-12 18:02:08 -0700785ifeq ($(CONFIG_DM_I2C_COMPAT),y)
786 @echo "===================== WARNING ======================"
787 @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
788 @echo "(possibly in a subsequent patch in your series)"
789 @echo "before sending patches to the mailing list."
790 @echo "===================================================="
791endif
wdenk7ebf7442002-11-02 23:17:16 +0000792
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +0900793PHONY += dtbs
794dtbs dts/dt.dtb: checkdtc u-boot
795 $(Q)$(MAKE) $(build)=dts dtbs
Simon Glass2c0f79e2011-10-24 19:15:31 +0000796
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +0900797u-boot-dtb.bin: u-boot.bin dts/dt.dtb FORCE
798 $(call if_changed,cat)
Simon Glass2c0f79e2011-10-24 19:15:31 +0000799
Stefano Babice64348f2014-03-31 09:50:35 +0200800%.imx: %.bin
801 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
802
Masahiro Yamada0d1e8aa2014-02-21 15:34:30 +0900803quiet_cmd_copy = COPY $@
804 cmd_copy = cp $< $@
805
806u-boot.dtb: dts/dt.dtb
807 $(call cmd,copy)
808
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900809OBJCOPYFLAGS_u-boot.hex := -O ihex
wdenk6310eb92005-01-09 21:28:15 +0000810
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900811OBJCOPYFLAGS_u-boot.srec := -O srec
wdenk7ebf7442002-11-02 23:17:16 +0000812
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900813u-boot.hex u-boot.srec: u-boot FORCE
814 $(call if_changed,objcopy)
815
Simon Glassfce7b272014-11-12 22:42:08 -0700816OBJCOPYFLAGS_u-boot.bin := -O binary \
817 $(if $(CONFIG_X86_RESET_VECTOR),-R .start16 -R .resetvec)
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900818
Chris Packham3ce7a4f2014-07-24 17:27:07 +1200819binary_size_check: u-boot.bin FORCE
Chris Packham67b060b2014-07-24 12:44:25 +1200820 @file_size=$(shell wc -c u-boot.bin | awk '{print $$1}') ; \
Chris Packham3ce7a4f2014-07-24 17:27:07 +1200821 map_size=$(shell cat u-boot.map | \
Simon Glass0b308f12014-06-18 00:10:15 -0600822 awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
Chris Packham3ce7a4f2014-07-24 17:27:07 +1200823 | sed 's/0X//g' \
Simon Glass0b308f12014-06-18 00:10:15 -0600824 | bc); \
Simon Glass89742922014-06-02 22:04:47 -0600825 if [ "" != "$$map_size" ]; then \
826 if test $$map_size -ne $$file_size; then \
Chris Packham3ce7a4f2014-07-24 17:27:07 +1200827 echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
Simon Glass89742922014-06-02 22:04:47 -0600828 echo " but u-boot.bin shows $$file_size" >&2 ; \
829 exit 1; \
830 fi \
831 fi
832
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900833u-boot.bin: u-boot FORCE
834 $(call if_changed,objcopy)
835 $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
836 $(BOARD_SIZE_CHECK)
wdenk7ebf7442002-11-02 23:17:16 +0000837
Masahiro Yamada9e414032014-02-04 17:24:24 +0900838u-boot.ldr: u-boot
Mike Frysinger76d82182009-07-21 22:17:36 -0400839 $(CREATE_LDR_ENV)
Sonic Zhang240182d2014-08-12 18:45:26 +0800840 $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400841 $(BOARD_SIZE_CHECK)
Mike Frysinger94a91e22008-02-04 19:26:57 -0500842
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900843OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
Mike Frysinger94a91e22008-02-04 19:26:57 -0500844
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900845OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
846
847u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
848 $(call if_changed,objcopy)
Mike Frysinger94a91e22008-02-04 19:26:57 -0500849
Stefan Roeseb40bda62012-08-16 17:54:52 +0200850#
851# U-Boot entry point, needed for booting of full-blown U-Boot
852# from the SPL U-Boot version.
853#
854ifndef CONFIG_SYS_UBOOT_START
855CONFIG_SYS_UBOOT_START := 0
856endif
857
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900858MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
859 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
860 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
861
Masahiro Yamada4ab3fc52014-03-11 11:05:17 +0900862MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
863 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900864
Stefan Roesea90ffb52015-01-19 11:33:45 +0100865MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
866 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
867
Masahiro Yamadae4536f82014-03-11 11:05:16 +0900868MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
869 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900870
Simon Glassd18926a2014-06-12 07:24:43 -0600871u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900872 $(call if_changed,mkimage)
wdenkbdccc4f2003-08-05 17:43:17 +0000873
Stefan Roesea90ffb52015-01-19 11:33:45 +0100874u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
875 $(call if_changed,mkimage)
876
Masahiro Yamada2405d092014-05-15 20:37:51 +0900877MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
878
879u-boot-dtb.img: u-boot-dtb.bin FORCE
880 $(call if_changed,mkimage)
881
Masahiro Yamada9e414032014-02-04 17:24:24 +0900882u-boot.sha1: u-boot.bin
883 tools/ubsha1 u-boot.bin
Heiko Schocher566a4942007-06-22 19:11:54 +0200884
Masahiro Yamada9e414032014-02-04 17:24:24 +0900885u-boot.dis: u-boot
wdenk7ebf7442002-11-02 23:17:16 +0000886 $(OBJDUMP) -d $< > $@
887
Ying Zhang3aa29de2013-08-16 15:16:15 +0800888ifdef CONFIG_TPL
Masahiro Yamada9e414032014-02-04 17:24:24 +0900889SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
Ying Zhang3aa29de2013-08-16 15:16:15 +0800890else
Masahiro Yamada9e414032014-02-04 17:24:24 +0900891SPL_PAYLOAD := u-boot.bin
Ying Zhang3aa29de2013-08-16 15:16:15 +0800892endif
Scott Wood74752ba2012-12-06 13:33:16 +0000893
Masahiro Yamada982a1192014-02-24 11:12:17 +0900894OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
895 --pad-to=$(CONFIG_SPL_PAD_TO)
896u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
897 $(call if_changed,pad_cat)
Ying Zhang3aa29de2013-08-16 15:16:15 +0800898
Masahiro Yamada982a1192014-02-24 11:12:17 +0900899OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
900 --pad-to=$(CONFIG_TPL_PAD_TO)
901tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
902 $(call if_changed,pad_cat)
Heiko Schocher7816f2c2011-07-16 00:06:42 +0000903
Masahiro Yamada630d2342014-02-24 11:12:21 +0900904SPL: spl/u-boot-spl.bin FORCE
905 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
906
907u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
Masahiro Yamada4e0c8ab2014-02-24 11:12:20 +0900908 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
Benoît Thébaudeau7d5a5c72013-04-11 09:35:57 +0000909
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900910MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
911
912u-boot.ubl: u-boot-with-spl.bin FORCE
913 $(call if_changed,mkimage)
José Miguel Gonçalves277f00f2012-09-19 01:25:26 +0000914
Masahiro Yamada982a1192014-02-24 11:12:17 +0900915MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
916 $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
917 -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
918spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
919 $(call if_changed,mkimage)
Christian Rieschd36d8852011-12-09 09:47:39 +0000920
Christian Riesch532d5312014-05-07 10:16:28 +0200921OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
Masahiro Yamada982a1192014-02-24 11:12:17 +0900922u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
923 $(call if_changed,pad_cat)
Otavio Salvadora5453552012-08-18 07:25:25 +0000924
Marek Vasut1a9df132014-04-03 19:12:21 +0200925u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
926 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
Masahiro Yamada03c7b3f2014-02-24 11:12:13 +0900927u-boot.sb: u-boot.bin spl/u-boot-spl.bin
Masahiro Yamada07e27ce2014-03-11 11:05:11 +0900928 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
Marek Vasut30b9b932011-11-08 23:18:19 +0000929
Stefan Roese94aebe62012-01-05 11:19:50 +0100930# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
931# Both images are created using mkimage (crc etc), so that the ROM
932# bootloader can check its integrity. Padding needs to be done to the
933# SPL image (with mkimage header) and not the binary. Otherwise the resulting image
934# which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
935# The resulting image containing both U-Boot images is called u-boot.spr
Masahiro Yamada982a1192014-02-24 11:12:17 +0900936MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
937 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
938spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
939 $(call if_changed,mkimage)
940
941OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
942 --gap-fill=0xff
943u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
944 $(call if_changed,pad_cat)
Stefan Roese94aebe62012-01-05 11:19:50 +0100945
Vitaly Andrianovef509b92014-04-04 13:16:53 -0400946MKIMAGEFLAGS_u-boot-spl.gph = -A $(ARCH) -T gpimage -C none \
947 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n SPL
948spl/u-boot-spl.gph: spl/u-boot-spl.bin FORCE
949 $(call if_changed,mkimage)
950
951OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
952 --gap-fill=0
953u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE
954 $(call if_changed,pad_cat)
955
Khoronzhuk, Ivan0e7f2db2014-07-04 15:03:26 +0300956MKIMAGEFLAGS_u-boot-nand.gph = -A $(ARCH) -T gpimage -C none \
957 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -n U-Boot
958u-boot-nand.gph: u-boot.bin FORCE
959 $(call if_changed,mkimage)
960 @dd if=/dev/zero bs=8 count=1 2>/dev/null >> $@
961
Simon Glassfce7b272014-11-12 22:42:08 -0700962# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
963# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
964# the middle.
965ifneq ($(CONFIG_X86_RESET_VECTOR),)
966rom: u-boot.rom FORCE
967
Bin Mengc7016232014-12-12 21:05:21 +0800968IFDTOOL=$(objtree)/tools/ifdtool
Simon Glass0f61de82014-12-17 15:50:37 +0800969IFDTOOL_FLAGS = -f 0:$(objtree)/u-boot.dtb
970IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
971IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot.bin
Bin Mengc7016232014-12-12 21:05:21 +0800972IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
973
974ifneq ($(CONFIG_HAVE_INTEL_ME),)
975IFDTOOL_ME_FLAGS = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
976IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin
977endif
978
979ifneq ($(CONFIG_HAVE_MRC),)
Bin Meng8c5224c2014-12-17 15:50:42 +0800980IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin
Bin Mengc7016232014-12-12 21:05:21 +0800981endif
982
Bin Meng63faf252014-12-17 15:50:43 +0800983ifneq ($(CONFIG_HAVE_FSP),)
984IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE)
985endif
986
987ifneq ($(CONFIG_HAVE_CMC),)
988IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
989endif
990
Bin Mengc7016232014-12-12 21:05:21 +0800991ifneq ($(CONFIG_X86_OPTION_ROM_ADDR),)
Bin Meng63faf252014-12-17 15:50:43 +0800992IFDTOOL_FLAGS += -w $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILE)
Bin Mengc7016232014-12-12 21:05:21 +0800993endif
994
995quiet_cmd_ifdtool = IFDTOOL $@
996cmd_ifdtool = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp;
997ifneq ($(CONFIG_HAVE_INTEL_ME),)
998cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp;
999endif
1000cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
1001cmd_ifdtool += mv u-boot.tmp $@
1002
1003u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin
1004 $(call if_changed,ifdtool)
Simon Glassfce7b272014-11-12 22:42:08 -07001005
1006OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
1007u-boot-x86-16bit.bin: u-boot FORCE
1008 $(call if_changed,objcopy)
1009endif
1010
Ian Campbell50827a52014-05-05 11:52:30 +01001011ifneq ($(CONFIG_SUNXI),)
1012OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
1013 --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
Simon Glass57f878e2014-10-30 20:25:46 -06001014u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin \
1015 u-boot$(if $(CONFIG_OF_CONTROL),-dtb,).img FORCE
Ian Campbell50827a52014-05-05 11:52:30 +01001016 $(call if_changed,pad_cat)
1017endif
1018
Tom Warren6d6c0ba2012-12-11 13:34:17 +00001019ifneq ($(CONFIG_TEGRA),)
Masahiro Yamada982a1192014-02-24 11:12:17 +09001020OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
1021u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
1022 $(call if_changed,pad_cat)
Stephen Warren9972db52013-05-14 08:00:53 +00001023
1024ifeq ($(CONFIG_OF_SEPARATE),y)
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +09001025u-boot-dtb-tegra.bin: u-boot-nodtb-tegra.bin dts/dt.dtb FORCE
1026 $(call if_changed,cat)
Stephen Warren9972db52013-05-14 08:00:53 +00001027endif
Allen Martin984df4e2012-08-31 08:30:10 +00001028endif
1029
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +09001030u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
1031 $(call if_changed,cat)
Stefan Roesefb3d2b82012-08-24 17:36:53 +02001032
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301033#Add a target to create boot binary having SPL binary in PBI format
1034#concatenated with u-boot binary. It is need by PowerPC SoC having
1035#internal SRAM <= 512KB.
1036MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
Alison Wang94cb17d2014-12-03 15:00:41 +08001037 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
1038 -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301039
1040spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
1041 $(call if_changed,mkimage)
1042
Alison Wang45c2e482014-12-03 15:00:42 +08001043ifeq ($(ARCH),arm)
1044UBOOT_BINLOAD := u-boot.img
1045else
1046UBOOT_BINLOAD := u-boot.bin
1047endif
1048
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301049OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1050 --gap-fill=0xff
1051
Alison Wang45c2e482014-12-03 15:00:42 +08001052u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301053 $(call if_changed,pad_cat)
1054
Stefan Roeseecddccd2013-02-22 11:36:50 +01001055# PPC4xx needs the SPL at the end of the image, since the reset vector
1056# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
1057# and need to introduce a new build target with the full blown U-Boot
1058# at the start padded up to the start of the SPL image. And then concat
1059# the SPL image to the end.
Masahiro Yamada982a1192014-02-24 11:12:17 +09001060
1061OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
1062 --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
1063u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
1064 $(call if_changed,pad_cat)
Stefan Roeseecddccd2013-02-22 11:36:50 +01001065
Scott Woodf4dc7142013-12-14 11:47:33 +08001066# Create a new ELF from a raw binary file. This is useful for arm64
1067# where static relocation needs to be performed on the raw binary,
1068# but certain simulators only accept an ELF file (but don't do the
1069# relocation).
1070# FIXME refactor dts/Makefile to share target/arch detection
Masahiro Yamada9e414032014-02-04 17:24:24 +09001071u-boot.elf: u-boot.bin
Scott Woodf4dc7142013-12-14 11:47:33 +08001072 @$(OBJCOPY) -B aarch64 -I binary -O elf64-littleaarch64 \
Masahiro Yamada9e414032014-02-04 17:24:24 +09001073 $< u-boot-elf.o
1074 @$(LD) u-boot-elf.o -o $@ \
Scott Woodf4dc7142013-12-14 11:47:33 +08001075 --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \
1076 -Ttext=$(CONFIG_SYS_TEXT_BASE)
1077
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001078# Rule to link u-boot
1079# May be overridden by arch/$(ARCH)/config.mk
1080quiet_cmd_u-boot__ ?= LD $@
1081 cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
1082 -T u-boot.lds $(u-boot-init) \
1083 --start-group $(u-boot-main) --end-group \
1084 $(PLATFORM_LIBS) -Map u-boot.map
Simon Glass86eb49b2011-10-03 19:26:50 +00001085
Vasili Galkacac8f382014-08-14 12:40:55 +03001086quiet_cmd_smap = GEN common/system_map.o
1087cmd_smap = \
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001088 smap=`$(call SYSTEM_MAP,u-boot) | \
1089 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
1090 $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
1091 -c $(srctree)/common/system_map.c -o common/system_map.o
Vasili Galkacac8f382014-08-14 12:40:55 +03001092
1093u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds
1094 $(call if_changed,u-boot__)
1095ifeq ($(CONFIG_KALLSYMS),y)
1096 $(call cmd,smap)
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001097 $(call cmd,u-boot__) common/system_map.o
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001098endif
wdenk7ebf7442002-11-02 23:17:16 +00001099
Michal Simek69c0d322014-04-24 15:24:28 +02001100# The actual objects are generated when descending,
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001101# make sure no implicit rule kicks in
1102$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
Marian Balakowiczf9328632006-09-01 19:49:50 +02001103
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001104# Handle descending into subdirectories listed in $(vmlinux-dirs)
1105# Preset locale variables to speed up the build process. Limit locale
1106# tweaks to this spot to avoid wrong language settings when running
1107# make menuconfig etc.
1108# Error messages still appears in the original language
wdenka8c7c702003-12-06 19:49:23 +00001109
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001110PHONY += $(u-boot-dirs)
Masahiro Yamada63780082014-02-24 11:12:10 +09001111$(u-boot-dirs): prepare scripts
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001112 $(Q)$(MAKE) $(build)=$@
Masahiro Yamada940db162014-02-04 17:24:10 +09001113
Masahiro Yamada74241452014-02-24 11:12:09 +09001114tools: prepare
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001115# The "tools" are needed early
1116$(filter-out tools, $(u-boot-dirs)): tools
1117# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1118# is "yes"), so compile examples after U-Boot is compiled.
1119examples: $(filter-out examples, $(u-boot-dirs))
1120
Masahiro Yamada74241452014-02-24 11:12:09 +09001121define filechk_uboot.release
1122 echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1123endef
1124
1125# Store (new) UBOOTRELEASE string in include/config/uboot.release
Masahiro Yamada51148792014-07-30 14:08:17 +09001126include/config/uboot.release: include/config/auto.conf FORCE
Masahiro Yamada74241452014-02-24 11:12:09 +09001127 $(call filechk,uboot.release)
1128
1129
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001130# Things we need to do before we recursively start building the kernel
1131# or the modules are listed in "prepare".
1132# A multi level approach is used. prepareN is processed before prepareN-1.
1133# archprepare is used in arch Makefiles and when processed asm symlink,
1134# version.h and scripts_basic is processed / created.
1135
1136# Listed in dependency order
1137PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
1138
1139# prepare3 is used to check if we are building in a separate output directory,
1140# and if so do:
1141# 1) Check that make has not been executed in the kernel src $(srctree)
Masahiro Yamada74241452014-02-24 11:12:09 +09001142prepare3: include/config/uboot.release
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001143ifneq ($(KBUILD_SRC),)
Masahiro Yamada51148792014-07-30 14:08:17 +09001144 @$(kecho) ' Using $(srctree) as source for U-Boot'
1145 $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001146 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
1147 echo >&2 " in the '$(srctree)' directory.";\
1148 /bin/false; \
1149 fi;
1150endif
1151
1152# prepare2 creates a makefile if using a separate output directory
1153prepare2: prepare3 outputmakefile
1154
Masahiro Yamada51148792014-07-30 14:08:17 +09001155prepare1: prepare2 $(version_h) $(timestamp_h) \
1156 include/config/auto.conf
Masahiro Yamada331b45f2014-02-25 19:26:47 +09001157ifeq ($(__HAVE_ARCH_GENERIC_BOARD),)
1158ifeq ($(CONFIG_SYS_GENERIC_BOARD),y)
1159 @echo >&2 " Your architecture does not support generic board."
1160 @echo >&2 " Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file."
1161 @/bin/false
1162endif
1163endif
Masahiro Yamada4a377552014-02-25 19:26:48 +09001164ifeq ($(wildcard $(LDSCRIPT)),)
1165 @echo >&2 " Could not find linker script."
1166 @/bin/false
1167endif
wdenk7ebf7442002-11-02 23:17:16 +00001168
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001169archprepare: prepare1 scripts_basic
wdenka8c7c702003-12-06 19:49:23 +00001170
Masahiro Yamada6a44d802014-02-24 11:12:11 +09001171prepare0: archprepare FORCE
1172 $(Q)$(MAKE) $(build)=.
wdenk7ebf7442002-11-02 23:17:16 +00001173
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001174# All the preparing..
1175prepare: prepare0
Che-liang Chiou349e83f2011-10-17 21:04:15 +00001176
Masahiro Yamada74241452014-02-24 11:12:09 +09001177# Generate some files
1178# ---------------------------------------------------------------------------
1179
1180define filechk_version.h
1181 (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1182 echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
1183 echo \#define CC_VERSION_STRING \"$$($(CC) --version | head -n 1)\"; \
1184 echo \#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; )
1185endef
1186
1187define filechk_timestamp.h
1188 (LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
1189 LC_ALL=C date +'#define U_BOOT_TIME "%T"')
1190endef
1191
Masahiro Yamada2e6b2f62014-03-10 10:42:27 +09001192$(version_h): include/config/uboot.release FORCE
Masahiro Yamada74241452014-02-24 11:12:09 +09001193 $(call filechk,version.h)
1194
1195$(timestamp_h): $(srctree)/Makefile FORCE
1196 $(call filechk,timestamp.h)
1197
Masahiro Yamada63780082014-02-24 11:12:10 +09001198# ---------------------------------------------------------------------------
1199
1200PHONY += depend dep
1201depend dep:
1202 @echo '*** Warning: make $@ is unnecessary now.'
1203
1204# ---------------------------------------------------------------------------
Masahiro Yamada04a34c92014-02-24 11:12:19 +09001205quiet_cmd_cpp_lds = LDS $@
Masahiro Yamada395e60c2014-04-09 20:10:43 +09001206cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
1207 -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
Masahiro Yamada63780082014-02-24 11:12:10 +09001208
Masahiro Yamada04a34c92014-02-24 11:12:19 +09001209u-boot.lds: $(LDSCRIPT) prepare FORCE
Masahiro Yamada395e60c2014-04-09 20:10:43 +09001210 $(call if_changed_dep,cpp_lds)
Wolfgang Denk1aada9c2009-08-17 14:00:53 +02001211
Masahiro Yamada982a1192014-02-24 11:12:17 +09001212spl/u-boot-spl.bin: spl/u-boot-spl
1213 @:
1214spl/u-boot-spl: tools prepare
Masahiro Yamadac7163082014-06-09 15:14:11 +09001215 $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
Daniel Schwierzeck5df2ee22011-07-13 05:11:04 +00001216
Ian Campbell50827a52014-05-05 11:52:30 +01001217spl/sunxi-spl.bin: spl/u-boot-spl
1218 @:
1219
Masahiro Yamada63780082014-02-24 11:12:10 +09001220tpl/u-boot-tpl.bin: tools prepare
Masahiro Yamada51148792014-07-30 14:08:17 +09001221 $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
Ying Zhang3aa29de2013-08-16 15:16:15 +08001222
Igor Grinberg8d819ab2014-07-15 15:52:00 +03001223TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
Jean-Christophe PLAGNIOL-VILLARDa340c322007-11-25 18:45:47 +01001224
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00001225FIND := find
1226FINDFLAGS := -L
1227
Marian Balakowiczf9328632006-09-01 19:49:50 +02001228tags ctags:
Masahiro Yamada9e414032014-02-04 17:24:24 +09001229 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08001230 -name '*.[chS]' -print`
wdenk7ebf7442002-11-02 23:17:16 +00001231
1232etags:
Igor Grinberg8d819ab2014-07-15 15:52:00 +03001233 etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08001234 -name '*.[chS]' -print`
Li Yangffda5862008-02-29 11:46:05 +08001235cscope:
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00001236 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
1237 cscope.files
Li Yangffda5862008-02-29 11:46:05 +08001238 cscope -b -q -k
wdenk7ebf7442002-11-02 23:17:16 +00001239
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001240SYSTEM_MAP = \
1241 $(NM) $1 | \
wdenk7ebf7442002-11-02 23:17:16 +00001242 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001243 LC_ALL=C sort
Masahiro Yamada9e414032014-02-04 17:24:24 +09001244System.map: u-boot
Masahiro Yamadabc8bb6e2013-11-11 14:36:01 +09001245 @$(call SYSTEM_MAP,$<) > $@
wdenk7ebf7442002-11-02 23:17:16 +00001246
Stephen Warren501ebdf2013-07-24 10:09:16 -07001247checkdtc:
1248 @if test $(call dtc-version) -lt 0104; then \
1249 echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
1250 false; \
1251 fi
1252
wdenk7ebf7442002-11-02 23:17:16 +00001253#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +00001254
Scott Wood54799e42013-12-14 11:47:34 +08001255# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1256# R_AARCH64_RELATIVE (64-bit).
Masahiro Yamada9e414032014-02-04 17:24:24 +09001257checkarmreloc: u-boot
Scott Wood54799e42013-12-14 11:47:34 +08001258 @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1259 grep R_A | sort -u`"; \
1260 if test "$$RELOC" != "R_ARM_RELATIVE" -a \
1261 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1262 echo "$< contains unexpected relocations: $$RELOC"; \
1263 false; \
1264 fi
Albert ARIBAUDc37980c2013-06-11 14:17:30 +02001265
Masahiro Yamada74241452014-02-24 11:12:09 +09001266env: scripts_basic
Masahiro Yamada3f76e982014-02-04 17:24:38 +09001267 $(Q)$(MAKE) $(build)=tools/$@
Mike Frysinger0358df42010-08-15 00:03:21 -04001268
Masahiro Yamada4642e002014-03-31 17:33:51 +09001269tools-only: scripts_basic $(version_h) $(timestamp_h)
1270 $(Q)$(MAKE) $(build)=tools
1271
Masahiro Yamada1ec8b4e2014-03-03 11:06:18 +09001272tools-all: export HOST_TOOLS_ALL=y
Masahiro Yamada2887c472014-02-04 17:24:39 +09001273tools-all: env tools ;
Mike Frysinger0358df42010-08-15 00:03:21 -04001274
Masahiro Yamadadb5b3392014-03-03 11:06:19 +09001275cross_tools: export CROSS_BUILD_TOOLS=y
1276cross_tools: tools ;
1277
Wolfgang Denk4e53a252006-10-25 00:43:17 +02001278.PHONY : CHANGELOG
1279CHANGELOG:
Ben Warrenb985b5d2006-10-26 14:38:25 -04001280 git log --no-merges U-Boot-1_1_5.. | \
1281 unexpand -a | sed -e 's/\s\s*$$//' > $@
Wolfgang Denk4e53a252006-10-25 00:43:17 +02001282
Harald Welte0a823aa2008-07-09 22:30:30 +08001283include/license.h: tools/bin2header COPYING
Wolfgang Denk0e42ada2010-05-27 23:18:33 +02001284 cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
wdenk7ebf7442002-11-02 23:17:16 +00001285#########################################################################
1286
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001287###
1288# Cleaning is done on three levels.
1289# make clean Delete most generated files
1290# Leave enough to build external modules
1291# make mrproper Delete the current configuration, and all generated files
1292# make distclean Remove editor backup files, patch leftover files and the like
wdenk7ebf7442002-11-02 23:17:16 +00001293
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001294# Directories & files removed with 'make clean'
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09001295CLEAN_DIRS += $(MODVERDIR) \
1296 $(foreach d, spl tpl, $(patsubst %,$d/%, \
Masahiro Yamada51148792014-07-30 14:08:17 +09001297 $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09001298
1299CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
Bo Shen2a507122015-01-15 10:03:53 +08001300 boot* u-boot* MLO* SPL System.map
Mike Frysinger9f4a4202009-10-01 12:11:54 -04001301
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001302# Directories & files removed with 'make mrproper'
Masahiro Yamada51148792014-07-30 14:08:17 +09001303MRPROPER_DIRS += include/config include/generated spl tpl \
Masahiro Yamada45f0ad92014-06-16 18:56:38 +09001304 .tmp_objdiff
Masahiro Yamada51148792014-07-30 14:08:17 +09001305MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
1306 ctags etags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
wdenk7ebf7442002-11-02 23:17:16 +00001307
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001308# clean - Delete most, but leave enough to build external modules
1309#
1310clean: rm-dirs := $(CLEAN_DIRS)
1311clean: rm-files := $(CLEAN_FILES)
wdenk7ebf7442002-11-02 23:17:16 +00001312
Masahiro Yamada6bd04bb2014-03-28 14:55:02 +09001313clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
Andy Fleming734329f2011-11-21 13:40:43 +00001314
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001315clean-dirs := $(addprefix _clean_, $(clean-dirs) doc/DocBook)
wdenk7ebf7442002-11-02 23:17:16 +00001316
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001317PHONY += $(clean-dirs) clean archclean
1318$(clean-dirs):
1319 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1320
1321# TODO: Do not use *.cfgtmp
1322clean: $(clean-dirs)
1323 $(call cmd,rmdirs)
1324 $(call cmd,rmfiles)
1325 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1326 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1327 -o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \
1328 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1329 -o -name '*.symtypes' -o -name 'modules.order' \
1330 -o -name modules.builtin -o -name '.tmp_*.o.*' \
1331 -o -name '*.gcno' \) -type f -print | xargs rm -f
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001332
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001333# mrproper - Delete all generated files, including .config
1334#
1335mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
1336mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1337mrproper-dirs := $(addprefix _mrproper_,scripts)
1338
1339PHONY += $(mrproper-dirs) mrproper archmrproper
1340$(mrproper-dirs):
1341 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1342
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09001343mrproper: clean $(mrproper-dirs)
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001344 $(call cmd,rmdirs)
1345 $(call cmd,rmfiles)
Masahiro Yamadae9c16a82014-06-24 18:15:45 +09001346 @rm -f arch/*/include/asm/arch
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001347
1348# distclean
1349#
1350PHONY += distclean
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001351
1352distclean: mrproper
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001353 @find $(srctree) $(RCS_FIND_IGNORE) \
1354 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1355 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
Masahiro Yamada598e2d32014-04-15 13:29:00 +09001356 -o -name '.*.rej' -o -name '*%' -o -name 'core' \
1357 -o -name '*.pyc' \) \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001358 -type f -print | xargs rm -f
Roger Meierfd18a892014-08-20 22:10:29 +02001359 @rm -f boards.cfg
wdenk7ebf7442002-11-02 23:17:16 +00001360
1361backup:
Masahiro Yamada4379ac62014-03-11 11:05:19 +09001362 F=`basename $(srctree)` ; cd .. ; \
Ilya Yanokd6b93712010-06-21 18:13:21 +04001363 gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
wdenk7ebf7442002-11-02 23:17:16 +00001364
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001365help:
1366 @echo 'Cleaning targets:'
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09001367 @echo ' clean - Remove most generated files but keep the config'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001368 @echo ' mrproper - Remove all generated files + config + various backup files'
1369 @echo ' distclean - mrproper + remove editor backup and patch files'
1370 @echo ''
Masahiro Yamada51148792014-07-30 14:08:17 +09001371 @echo 'Configuration targets:'
1372 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1373 @echo ''
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001374 @echo 'Other generic targets:'
1375 @echo ' all - Build all necessary images depending on configuration'
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +09001376 @echo '* u-boot - Build the bare u-boot'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001377 @echo ' dir/ - Build all files in dir and below'
1378 @echo ' dir/file.[oisS] - Build specified target only'
1379 @echo ' dir/file.lst - Build specified mixed source/assembly target only'
1380 @echo ' (requires a recent binutils and recent build (System.map))'
Igor Grinberg5fc2f922014-07-15 15:52:02 +03001381 @echo ' tags/ctags - Generate ctags file for editors'
1382 @echo ' etags - Generate etags file for editors'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001383 @echo ' cscope - Generate cscope index'
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +09001384 @echo ' ubootrelease - Output the release version string (use with make -s)'
1385 @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001386 @echo ''
1387 @echo 'Static analysers'
1388 @echo ' checkstack - Generate a list of stack hogs'
1389 @echo ''
1390 @echo 'Documentation targets:'
1391 @$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp
1392 @echo ''
1393 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1394 @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
1395 @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
1396 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
1397 @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
1398 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1399 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
1400 @echo ' 1: warnings which may be relevant and do not occur too often'
1401 @echo ' 2: warnings which occur quite often but may still be relevant'
1402 @echo ' 3: more obscure warnings, can most likely be ignored'
1403 @echo ' Multiple levels can be combined with W=12 or W=123'
1404 @echo ''
1405 @echo 'Execute "make" or "make all" to build all targets marked with [*] '
1406 @echo 'For further info see the ./README file'
1407
Masahiro Yamada8fac9c72014-02-05 10:52:50 +09001408
1409# Documentation targets
1410# ---------------------------------------------------------------------------
1411%docs: scripts_basic FORCE
1412 $(Q)$(MAKE) $(build)=scripts build_docproc
1413 $(Q)$(MAKE) $(build)=doc/DocBook $@
1414
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001415# Dummies...
1416PHONY += prepare scripts
1417prepare: ;
1418scripts: ;
Masahiro Yamada9e414032014-02-04 17:24:24 +09001419
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001420endif #ifeq ($(config-targets),1)
1421endif #ifeq ($(mixed-targets),1)
1422
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001423PHONY += checkstack ubootrelease ubootversion
1424
1425checkstack:
1426 $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
1427 $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
1428
1429ubootrelease:
1430 @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1431
1432ubootversion:
1433 @echo $(UBOOTVERSION)
1434
Masahiro Yamada886d86e2014-02-24 11:12:22 +09001435# Single targets
1436# ---------------------------------------------------------------------------
1437# Single targets are compatible with:
1438# - build with mixed source and output
1439# - build with separate output dir 'make O=...'
1440# - external modules
1441#
1442# target-dir => where to store outputfile
1443# build-dir => directory in kernel source tree to use
1444
1445ifeq ($(KBUILD_EXTMOD),)
1446 build-dir = $(patsubst %/,%,$(dir $@))
1447 target-dir = $(dir $@)
1448else
1449 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1450 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1451 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1452endif
1453
1454%.s: %.c prepare scripts FORCE
1455 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1456%.i: %.c prepare scripts FORCE
1457 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1458%.o: %.c prepare scripts FORCE
1459 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1460%.lst: %.c prepare scripts FORCE
1461 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1462%.s: %.S prepare scripts FORCE
1463 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1464%.o: %.S prepare scripts FORCE
1465 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1466%.symtypes: %.c prepare scripts FORCE
1467 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1468
1469# Modules
1470/: prepare scripts FORCE
1471 $(cmd_crmodverdir)
1472 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1473 $(build)=$(build-dir)
1474%/: prepare scripts FORCE
1475 $(cmd_crmodverdir)
1476 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1477 $(build)=$(build-dir)
1478%.ko: prepare scripts FORCE
1479 $(cmd_crmodverdir)
1480 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1481 $(build)=$(build-dir) $(@:.ko=.o)
1482 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1483
Michal Simek69c0d322014-04-24 15:24:28 +02001484# FIXME Should go into a make.lib or something
Masahiro Yamada886d86e2014-02-24 11:12:22 +09001485# ===========================================================================
1486
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001487quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
1488 cmd_rmdirs = rm -rf $(rm-dirs)
1489
1490quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
1491 cmd_rmfiles = rm -f $(rm-files)
1492
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001493# read all saved command lines
1494
1495targets := $(wildcard $(sort $(targets)))
1496cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1497
1498ifneq ($(cmd_files),)
1499 $(cmd_files): ; # Do not try to update included dependency files
1500 include $(cmd_files)
1501endif
1502
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001503# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
1504# Usage:
1505# $(Q)$(MAKE) $(clean)=dir
Masahiro Yamada176d0982014-10-30 11:06:13 +09001506clean := -f $(srctree)/scripts/Makefile.clean obj
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001507
Masahiro Yamada9e414032014-02-04 17:24:24 +09001508endif # skip-makefile
1509
1510PHONY += FORCE
1511FORCE:
1512
1513# Declare the contents of the .PHONY variable as phony. We keep that
1514# information in a variable so we can use it in if_changed and friends.
1515.PHONY: $(PHONY)