blob: 23310a4391eeb73c75e9bc6abc0eb092f083c984 [file] [log] [blame]
wdenk2d39b712000-12-14 10:04:19 +00001/*
wdenk180d3f72004-01-04 16:28:35 +00002 * (C) Copyright 2000-2004
wdenk2d39b712000-12-14 10:04:19 +00003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
wdenk180d3f72004-01-04 16:28:35 +00005 * Derived from FADS860T definitions by Magnus Damm, Helmut Buchsbaum,
6 * and Dan Malek
7 *
8 * Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com
9 *
10 * This header file contains values common to all FADS family boards.
11 *
wdenk2d39b712000-12-14 10:04:19 +000012 * See file CREDITS for list of people who contributed to this
13 * project.
14 *
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License as
17 * published by the Free Software Foundation; either version 2 of
18 * the License, or (at your option) any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
28 * MA 02111-1307 USA
29 */
30
31/****************************************************************************
wdenk180d3f72004-01-04 16:28:35 +000032 * Flash Memory Map as used by U-Boot:
wdenk2d39b712000-12-14 10:04:19 +000033 *
34 * Start Address Length
35 * +-----------------------+ 0xFE00_0000 Start of Flash -----------------
wdenk180d3f72004-01-04 16:28:35 +000036 * | | 0xFE00_0100 Reset Vector
37 * + + 0xFE0?_????
38 * | U-Boot code |
39 * | |
40 * +-----------------------+ 0xFE04_0000 (sector border)
41 * | |
42 * | |
43 * | U-Boot environment |
44 * | | ^
45 * | | | U-Boot
46 * +=======================+ 0xFE08_0000 (sector border) -----------------
47 * | Available | | Applications
wdenk2d39b712000-12-14 10:04:19 +000048 * | ... | v
49 *
50 *****************************************************************************/
wdenk180d3f72004-01-04 16:28:35 +000051
52#if 0
53#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
54#else
55#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
56#endif
57
Wolfgang Denk8ff02082006-03-12 01:55:43 +010058#define CONFIG_ENV_OVERWRITE
59
60#define CONFIG_NFSBOOTCOMMAND \
wdenk180d3f72004-01-04 16:28:35 +000061 "dhcp;" \
Wolfgang Denk8ff02082006-03-12 01:55:43 +010062 "setenv bootargs root=/dev/nfs rw nfsroot=$rootpath " \
63 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:eth0:off;" \
wdenk180d3f72004-01-04 16:28:35 +000064 "bootm"
65
Wolfgang Denk8ff02082006-03-12 01:55:43 +010066#define CONFIG_BOOTCOMMAND \
67 "setenv bootargs root=/dev/mtdblock2 rw mtdparts=phys:1280K(ROM)ro,-(root) "\
68 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:eth0:off;" \
69 "bootm fe080000"
70
71#undef CONFIG_BOOTARGS
72
wdenk180d3f72004-01-04 16:28:35 +000073#undef CONFIG_WATCHDOG /* watchdog disabled */
Scott Wood78f9fef2007-08-15 15:46:46 -050074
75#if !defined(CONFIG_MPC885ADS)
wdenk11142572004-06-06 21:35:06 +000076#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
Scott Wood78f9fef2007-08-15 15:46:46 -050077#endif
wdenk180d3f72004-01-04 16:28:35 +000078
79/*
Wolfgang Denk8ff02082006-03-12 01:55:43 +010080 * New MPC86xADS and MPC885ADS provide two Ethernet connectivity options:
wdenk180d3f72004-01-04 16:28:35 +000081 * 10Mbit/s on SCC and 100Mbit/s on FEC. FADS provides SCC Ethernet on
82 * motherboard and FEC Ethernet on daughterboard. All new PQ1 chips have
83 * got FEC so FEC is the default.
84 */
85#ifndef CONFIG_ADS
86#undef CONFIG_SCC1_ENET /* Disable SCC1 ethernet */
87#define CONFIG_FEC_ENET /* Use FEC ethernet */
88#else /* Old ADS has not got FEC option */
89#define CONFIG_SCC1_ENET /* Use SCC1 ethernet */
90#undef CONFIG_FEC_ENET /* No FEC ethernet */
91#endif /* !CONFIG_ADS */
92
93#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
94#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
95#endif
96
97#ifdef CONFIG_FEC_ENET
98#define CFG_DISCOVER_PHY
TsiChung Liew0f3ba7e2008-03-30 01:22:13 -050099#define CONFIG_MII_INIT 1
wdenk180d3f72004-01-04 16:28:35 +0000100#endif
101
Jon Loeliger079a1362007-07-10 10:12:10 -0500102
103/*
104 * BOOTP options
105 */
106#define CONFIG_BOOTP_BOOTFILESIZE
107#define CONFIG_BOOTP_BOOTPATH
108#define CONFIG_BOOTP_GATEWAY
109#define CONFIG_BOOTP_HOSTNAME
110
111
Jon Loeliger498ff9a2007-07-05 19:13:52 -0500112#if !defined(FADS_COMMANDS_ALREADY_DEFINED)
113/*
114 * Command line configuration.
115 */
116#include <config_cmd_default.h>
wdenk180d3f72004-01-04 16:28:35 +0000117
Jon Loeliger498ff9a2007-07-05 19:13:52 -0500118#define CONFIG_CMD_ASKENV
119#define CONFIG_CMD_DHCP
120#define CONFIG_CMD_ECHO
121#define CONFIG_CMD_IMMAP
122#define CONFIG_CMD_JFFS2
123#define CONFIG_CMD_MII
124#define CONFIG_CMD_PCMCIA
125#define CONFIG_CMD_PING
126
127#endif
128
wdenk180d3f72004-01-04 16:28:35 +0000129
130/*
131 * Miscellaneous configurable options
132 */
Wolfgang Denk8ff02082006-03-12 01:55:43 +0100133#define CFG_PROMPT "=>" /* Monitor Command Prompt */
134#define CFG_HUSH_PARSER
135#define CFG_PROMPT_HUSH_PS2 "> "
136#define CFG_LONGHELP /* #undef to save memory */
Jon Loeligerc508a4c2007-07-09 18:31:28 -0500137#if defined(CONFIG_CMD_KGDB)
Wolfgang Denk8ff02082006-03-12 01:55:43 +0100138#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
wdenk180d3f72004-01-04 16:28:35 +0000139#else
Wolfgang Denk8ff02082006-03-12 01:55:43 +0100140#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
wdenk180d3f72004-01-04 16:28:35 +0000141#endif
Wolfgang Denk8ff02082006-03-12 01:55:43 +0100142#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */
143#define CFG_MAXARGS 16 /* max number of command args */
144#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
wdenk180d3f72004-01-04 16:28:35 +0000145
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200146#define CFG_LOAD_ADDR 0x00100000
wdenk180d3f72004-01-04 16:28:35 +0000147
148#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
149
150#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
151
152/*
153 * Low Level Configuration Settings
154 * (address mappings, register initial values, etc.)
155 * You should know what you are doing if you make changes here.
156 */
Wolfgang Denk8ff02082006-03-12 01:55:43 +0100157
wdenk180d3f72004-01-04 16:28:35 +0000158/*-----------------------------------------------------------------------
159 * Internal Memory Mapped Register
160 */
161#define CFG_IMMR 0xFF000000
162
163/*-----------------------------------------------------------------------
164 * Definitions for initial stack pointer and data area (in DPRAM)
165 */
166#define CFG_INIT_RAM_ADDR CFG_IMMR
167#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
168#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
169#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
170#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
171
172/*-----------------------------------------------------------------------
173 * Start addresses for the final memory configuration
174 * (Set up by the startup code)
175 * Please note that CFG_SDRAM_BASE _must_ start at 0
176 */
177#define CFG_SDRAM_BASE 0x00000000
wdenk11142572004-06-06 21:35:06 +0000178#if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC885ADS) /* New ADS or Duet */
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200179#define CFG_SDRAM_SIZE 0x00800000 /* 8 Mbyte */
Wolfgang Denk8ff02082006-03-12 01:55:43 +0100180/*
181 * 2048 SDRAM rows
182 * 1000 factor s -> ms
183 * 64 PTP (pre-divider from MPTPR) from SDRAM example configuration
184 * 4 Number of refresh cycles per period
185 * 64 Refresh cycle in ms per number of rows
186 */
187#define CFG_PTA_PER_CLK ((2048 * 64 * 1000) / (4 * 64))
wdenk180d3f72004-01-04 16:28:35 +0000188#elif defined(CONFIG_FADS) /* Old/new FADS */
189#define CFG_SDRAM_SIZE 0x00400000 /* 4 Mbyte */
190#else /* Old ADS */
191#define CFG_SDRAM_SIZE 0x00000000 /* No SDRAM */
192#endif
193
194#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
195#if (CFG_SDRAM_SIZE)
196#define CFG_MEMTEST_END CFG_SDRAM_SIZE /* 1 ... SDRAM_SIZE */
197#else
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200198#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
wdenk180d3f72004-01-04 16:28:35 +0000199#endif /* CFG_SDRAM_SIZE */
200
201/*
202 * For booting Linux, the board info and command line data
203 * have to be in the first 8 MB of memory, since this is
204 * the maximum mapped by the Linux kernel during initialization.
205 */
206#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenk99edcfb2004-06-09 21:54:22 +0000207
208#define CFG_MONITOR_BASE TEXT_BASE
209#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */
210
211#ifdef CONFIG_BZIP2
212#define CFG_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */
213#else
214#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */
215#endif /* CONFIG_BZIP2 */
216
wdenk180d3f72004-01-04 16:28:35 +0000217/*-----------------------------------------------------------------------
218 * Flash organization
219 */
wdenk99edcfb2004-06-09 21:54:22 +0000220#define CFG_FLASH_BASE CFG_MONITOR_BASE
221#define CFG_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */
wdenk180d3f72004-01-04 16:28:35 +0000222
wdenk99edcfb2004-06-09 21:54:22 +0000223#define CFG_MAX_FLASH_BANKS 4 /* max number of memory banks */
224#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
wdenk180d3f72004-01-04 16:28:35 +0000225
226#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
227#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
228
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200229#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200230#define CONFIG_ENV_SECT_SIZE 0x40000 /* see README - env sector total size */
231#define CONFIG_ENV_OFFSET CONFIG_ENV_SECT_SIZE
232#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment */
Wolfgang Denk67c31032007-09-16 17:10:04 +0200233#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
wdenk180d3f72004-01-04 16:28:35 +0000234
wdenk99edcfb2004-06-09 21:54:22 +0000235#define CFG_DIRECT_FLASH_TFTP
wdenk11142572004-06-06 21:35:06 +0000236
Jon Loeligerc508a4c2007-07-09 18:31:28 -0500237#if defined(CONFIG_CMD_JFFS2)
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200238
239/*
240 * JFFS2 partitions
241 *
242 */
243/* No command line, one static partition, whole device */
244#undef CONFIG_JFFS2_CMDLINE
245#define CONFIG_JFFS2_DEV "nor0"
246#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
247#define CONFIG_JFFS2_PART_OFFSET 0x00000000
248
249/* mtdparts command line support */
250/* Note: fake mtd_id used, no linux mtd map file */
251/*
252#define CONFIG_JFFS2_CMDLINE
253#define MTDIDS_DEFAULT "nor0=fads0,nor1=fads-1,nor2=fads-2,nor3=fads-3"
254#define MTDPARTS_DEFAULT "mtdparts=fads-0:-@1m(user1),fads-1:-(user2),fads-2:-(user3),fads-3:-(user4)"
255*/
256
wdenk99edcfb2004-06-09 21:54:22 +0000257#define CFG_JFFS2_SORT_FRAGMENTS
Jon Loeliger77a31852007-07-10 10:39:10 -0500258#endif
wdenk180d3f72004-01-04 16:28:35 +0000259
260/*-----------------------------------------------------------------------
261 * Cache Configuration
262 */
263#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
wdenk180d3f72004-01-04 16:28:35 +0000264#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
wdenk180d3f72004-01-04 16:28:35 +0000265
266/*-----------------------------------------------------------------------
267 * I2C configuration
268 */
Jon Loeligerc508a4c2007-07-09 18:31:28 -0500269#if defined(CONFIG_CMD_I2C)
wdenk180d3f72004-01-04 16:28:35 +0000270#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
271#define CFG_I2C_SPEED 400000 /* I2C speed and slave address defaults */
272#define CFG_I2C_SLAVE 0x7F
273#endif
274
275/*-----------------------------------------------------------------------
276 * SYPCR - System Protection Control 11-9
277 * SYPCR can only be written once after reset!
278 *-----------------------------------------------------------------------
279 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
280 */
281#if defined(CONFIG_WATCHDOG)
282#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
283 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
284#else
285#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
286#endif
287
288/*-----------------------------------------------------------------------
289 * SIUMCR - SIU Module Configuration 11-6
290 *-----------------------------------------------------------------------
291 * PCMCIA config., multi-function pin tri-state
292 */
293#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
294
295/*-----------------------------------------------------------------------
296 * TBSCR - Time Base Status and Control 11-26
297 *-----------------------------------------------------------------------
298 * Clear Reference Interrupt Status, Timebase freezing enabled
299 */
300#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
301
302/*-----------------------------------------------------------------------
303 * PISCR - Periodic Interrupt Status and Control 11-31
304 *-----------------------------------------------------------------------
305 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
306 */
307#define CFG_PISCR (PISCR_PS | PISCR_PITF)
308
309/*-----------------------------------------------------------------------
310 * SCCR - System Clock and reset Control Register 15-27
311 *-----------------------------------------------------------------------
312 * Set clock output, timebase and RTC source and divider,
313 * power management and some other internal clocks
314 */
315#define SCCR_MASK SCCR_EBDF11
Wolfgang Denk8ff02082006-03-12 01:55:43 +0100316#define CFG_SCCR SCCR_TBS
wdenk180d3f72004-01-04 16:28:35 +0000317
wdenk11142572004-06-06 21:35:06 +0000318/*-----------------------------------------------------------------------
Wolfgang Denk8ff02082006-03-12 01:55:43 +0100319 * DER - Debug Enable Register
wdenk11142572004-06-06 21:35:06 +0000320 *-----------------------------------------------------------------------
Wolfgang Denk8ff02082006-03-12 01:55:43 +0100321 * Set to zero to prevent the processor from entering debug mode
wdenk180d3f72004-01-04 16:28:35 +0000322 */
323#define CFG_DER 0
324
Wolfgang Denk8ff02082006-03-12 01:55:43 +0100325/* Because of the way the 860 starts up and assigns CS0 the entire
326 * address space, we have to set the memory controller differently.
327 * Normally, you write the option register first, and then enable the
328 * chip select by writing the base register. For CS0, you must write
329 * the base register first, followed by the option register.
330 */
wdenk180d3f72004-01-04 16:28:35 +0000331
332/*
333 * Init Memory Controller:
334 *
335 * BR0/OR0 (Flash)
336 * BR1/OR1 (BCSR)
337 */
338/* the other CS:s are determined by looking at parameters in BCSRx */
339
340#define BCSR_ADDR ((uint) 0xFF080000)
341
342#define CFG_PRELIM_OR_AM 0xFF800000 /* OR addr mask */
343
344/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
345#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
346
347#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) /* 8 Mbyte until detected */
348#define CFG_BR0_PRELIM ((CFG_FLASH_BASE & BR_BA_MSK) | BR_V )
349
350/* BCSRx - Board Control and Status Registers */
351#define CFG_OR1_PRELIM 0xFFFF8110 /* 64Kbyte address space */
352#define CFG_BR1_PRELIM ((BCSR_ADDR) | BR_V)
353
354/*
355 * Internal Definitions
356 *
357 * Boot Flags
358 */
359#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
360#define BOOTFLAG_WARM 0x02 /* Software reboot */
361
362/* values according to the manual */
363
wdenk180d3f72004-01-04 16:28:35 +0000364#define BCSR0 ((uint) (BCSR_ADDR + 0x00))
365#define BCSR1 ((uint) (BCSR_ADDR + 0x04))
366#define BCSR2 ((uint) (BCSR_ADDR + 0x08))
367#define BCSR3 ((uint) (BCSR_ADDR + 0x0c))
368#define BCSR4 ((uint) (BCSR_ADDR + 0x10))
369
370/*
371 * (F)ADS bitvalues by Helmut Buchsbaum
372 *
373 * See User's Manual for a proper
374 * description of the following structures
375 */
376
377#define BCSR0_ERB ((uint)0x80000000)
378#define BCSR0_IP ((uint)0x40000000)
379#define BCSR0_BDIS ((uint)0x10000000)
380#define BCSR0_BPS_MASK ((uint)0x0C000000)
381#define BCSR0_ISB_MASK ((uint)0x01800000)
382#define BCSR0_DBGC_MASK ((uint)0x00600000)
383#define BCSR0_DBPC_MASK ((uint)0x00180000)
384#define BCSR0_EBDF_MASK ((uint)0x00060000)
385
386#define BCSR1_FLASH_EN ((uint)0x80000000)
387#define BCSR1_DRAM_EN ((uint)0x40000000)
388#define BCSR1_ETHEN ((uint)0x20000000)
389#define BCSR1_IRDEN ((uint)0x10000000)
390#define BCSR1_FLASH_CFG_EN ((uint)0x08000000)
391#define BCSR1_CNT_REG_EN_PROTECT ((uint)0x04000000)
392#define BCSR1_BCSR_EN ((uint)0x02000000)
393#define BCSR1_RS232EN_1 ((uint)0x01000000)
394#define BCSR1_PCCEN ((uint)0x00800000)
395#define BCSR1_PCCVCC0 ((uint)0x00400000)
396#define BCSR1_PCCVPP_MASK ((uint)0x00300000)
397#define BCSR1_DRAM_HALF_WORD ((uint)0x00080000)
398#define BCSR1_RS232EN_2 ((uint)0x00040000)
399#define BCSR1_SDRAM_EN ((uint)0x00020000)
400#define BCSR1_PCCVCC1 ((uint)0x00010000)
401
402#define BCSR1_PCCVCCON BCSR1_PCCVCC0
403
404#define BCSR2_FLASH_PD_MASK ((uint)0xF0000000)
wdenk99edcfb2004-06-09 21:54:22 +0000405#define BCSR2_FLASH_PD_SHIFT 28
wdenk180d3f72004-01-04 16:28:35 +0000406#define BCSR2_DRAM_PD_MASK ((uint)0x07800000)
407#define BCSR2_DRAM_PD_SHIFT 23
408#define BCSR2_EXTTOLI_MASK ((uint)0x00780000)
409#define BCSR2_DBREVNR_MASK ((uint)0x00030000)
410
411#define BCSR3_DBID_MASK ((ushort)0x3800)
412#define BCSR3_CNT_REG_EN_PROTECT ((ushort)0x0400)
413#define BCSR3_BREVNR0 ((ushort)0x0080)
414#define BCSR3_FLASH_PD_MASK ((ushort)0x0070)
415#define BCSR3_BREVN1 ((ushort)0x0008)
416#define BCSR3_BREVN2_MASK ((ushort)0x0003)
417
418#define BCSR4_ETHLOOP ((uint)0x80000000)
419#define BCSR4_TFPLDL ((uint)0x40000000)
420#define BCSR4_TPSQEL ((uint)0x20000000)
421#define BCSR4_SIGNAL_LAMP ((uint)0x10000000)
Wolfgang Denk8ff02082006-03-12 01:55:43 +0100422#if defined(CONFIG_MPC823)
wdenk180d3f72004-01-04 16:28:35 +0000423#define BCSR4_USB_EN ((uint)0x08000000)
wdenk180d3f72004-01-04 16:28:35 +0000424#define BCSR4_USB_SPEED ((uint)0x04000000)
wdenk180d3f72004-01-04 16:28:35 +0000425#define BCSR4_VCCO ((uint)0x02000000)
wdenk180d3f72004-01-04 16:28:35 +0000426#define BCSR4_VIDEO_ON ((uint)0x00800000)
wdenk180d3f72004-01-04 16:28:35 +0000427#define BCSR4_VDO_EKT_CLK_EN ((uint)0x00400000)
wdenk180d3f72004-01-04 16:28:35 +0000428#define BCSR4_VIDEO_RST ((uint)0x00200000)
wdenk180d3f72004-01-04 16:28:35 +0000429#define BCSR4_MODEM_EN ((uint)0x00100000)
wdenk180d3f72004-01-04 16:28:35 +0000430#define BCSR4_DATA_VOICE ((uint)0x00080000)
Wolfgang Denk8ff02082006-03-12 01:55:43 +0100431#elif defined(CONFIG_MPC850)
wdenk180d3f72004-01-04 16:28:35 +0000432#define BCSR4_DATA_VOICE ((uint)0x00080000)
Wolfgang Denk8ff02082006-03-12 01:55:43 +0100433#elif defined(CONFIG_MPC860SAR)
434#define BCSR4_UTOPIA_EN ((uint)0x08000000)
435#else /* MPC860T and other chips with FEC */
436#define BCSR4_FETH_EN ((uint)0x08000000)
437#define BCSR4_FETHCFG0 ((uint)0x04000000)
438#define BCSR4_FETHFDE ((uint)0x02000000)
439#define BCSR4_FETHCFG1 ((uint)0x00400000)
440#define BCSR4_FETHRST ((uint)0x00200000)
441#endif
wdenk180d3f72004-01-04 16:28:35 +0000442
Wolfgang Denk8ff02082006-03-12 01:55:43 +0100443/* BSCR5 exists on MPC86xADS and MPC885ADS only */
wdenk11142572004-06-06 21:35:06 +0000444
445#define CFG_PHYDEV_ADDR (BCSR_ADDR + 0x20000)
446
447#define BCSR5 (CFG_PHYDEV_ADDR + 0x300)
448
449#define BCSR5_MII2_EN 0x40
450#define BCSR5_MII2_RST 0x20
451#define BCSR5_T1_RST 0x10
452#define BCSR5_ATM155_RST 0x08
453#define BCSR5_ATM25_RST 0x04
454#define BCSR5_MII1_EN 0x02
455#define BCSR5_MII1_RST 0x01
456
wdenk180d3f72004-01-04 16:28:35 +0000457/* We don't use the 8259.
458*/
459#define NR_8259_INTS 0
460
wdenk180d3f72004-01-04 16:28:35 +0000461/*-----------------------------------------------------------------------
462 * PCMCIA stuff
463 *-----------------------------------------------------------------------
464 */
wdenk180d3f72004-01-04 16:28:35 +0000465#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
466#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
467#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
468#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
469#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
470#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
471#define CFG_PCMCIA_IO_ADDR (0xEC000000)
472#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
473
474/*-----------------------------------------------------------------------
475 * IDE/ATA stuff
476 *-----------------------------------------------------------------------
477 */
478#define CONFIG_MAC_PARTITION 1
479#define CONFIG_DOS_PARTITION 1
480#define CONFIG_ISO_PARTITION 1
481
482#undef CONFIG_ATAPI
Jon Loeliger77a31852007-07-10 10:39:10 -0500483#if 0 /* does not make sense when CONFIG_CMD_IDE is not enabled, too */
wdenk180d3f72004-01-04 16:28:35 +0000484#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
Wolfgang Denk966083e2006-07-21 15:24:56 +0200485#endif
wdenk180d3f72004-01-04 16:28:35 +0000486#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
487#undef CONFIG_IDE_LED /* LED for ide not supported */
488#undef CONFIG_IDE_RESET /* reset for ide not supported */
489
490#define CFG_IDE_MAXBUS 1 /* max. 2 IDE busses */
491#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
492
493#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
494#define CFG_ATA_IDE0_OFFSET 0x0000
495
496/* Offset for data I/O */
497#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)
498/* Offset for normal register accesses */
499#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
500/* Offset for alternate registers */
501#define CFG_ATA_ALT_OFFSET 0x0000
502
503#define CONFIG_DISK_SPINUP_TIME 1000000
Wolfgang Denk8ff02082006-03-12 01:55:43 +0100504/* #undef CONFIG_DISK_SPINUP_TIME */ /* usin Compact Flash */