blob: 7d60cf9840b133a91e7510c75e01bec325bfcf69 [file] [log] [blame]
Heiko Schocher7254d922015-05-18 13:32:31 +02001/*
2 * (C) Copyright 2015
3 * (C) Copyright 2014
4 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
5 *
6 * Based on:
7 * Copyright (C) 2012 Freescale Semiconductor, Inc.
8 *
9 * Configuration settings for the Freescale i.MX6Q SabreSD board.
10 *
11 * SPDX-License-Identifier: GPL-2.0+
12 */
13#ifndef __ARISTAINETOS_COMMON_CONFIG_H
14#define __ARISTAINETOS_COMMON_CONFIG_H
15
16#define CONFIG_MX6
17
18#include "mx6_common.h"
19#include <linux/sizes.h>
20
21#define CONFIG_DISPLAY_CPUINFO
22#define CONFIG_DISPLAY_BOARDINFO
23
24#include <asm/arch/imx-regs.h>
25#include <asm/imx-common/gpio.h>
26
27#define CONFIG_MACH_TYPE 4501
28#define CONFIG_MMCROOT "/dev/mmcblk0p1"
29#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
30
31#define CONFIG_SYS_GENERIC_BOARD
32
33/* Size of malloc() pool */
34#define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M)
35
36#define CONFIG_BOARD_EARLY_INIT_F
37#define CONFIG_MXC_GPIO
38
39#define CONFIG_MXC_UART
40
41#define CONFIG_CMD_FUSE
42#define CONFIG_MXC_OCOTP
43
44/* MMC Configs */
45#define CONFIG_FSL_ESDHC
46#define CONFIG_FSL_USDHC
47#define CONFIG_SYS_FSL_ESDHC_ADDR 0
48
49#define CONFIG_MMC
50#define CONFIG_CMD_MMC
51#define CONFIG_GENERIC_MMC
52#define CONFIG_BOUNCE_BUFFER
53#define CONFIG_CMD_EXT2
54#define CONFIG_CMD_FAT
55#define CONFIG_DOS_PARTITION
56
57#define CONFIG_CMD_PING
58#define CONFIG_CMD_DHCP
59#define CONFIG_CMD_MII
60#define CONFIG_CMD_NET
61#define CONFIG_FEC_MXC
62#define CONFIG_MII
63#define IMX_FEC_BASE ENET_BASE_ADDR
64#define CONFIG_ETHPRIME "FEC"
65#define CONFIG_FEC_MXC_PHYADDR 0
66
67#define CONFIG_PHYLIB
68#define CONFIG_PHY_MICREL
69
70#define CONFIG_CMD_SF
71#define CONFIG_SPI_FLASH
72#define CONFIG_SPI_FLASH_MTD
73#define CONFIG_SPI_FLASH_STMICRO
74#define CONFIG_MXC_SPI
75#define CONFIG_SF_DEFAULT_BUS 3
76#define CONFIG_SF_DEFAULT_SPEED 20000000
77#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
78#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
79
80/* allow to overwrite serial and ethaddr */
81#define CONFIG_ENV_OVERWRITE
82#define CONFIG_CONS_INDEX 1
83#define CONFIG_BAUDRATE 115200
84
85/* Command definition */
86#include <config_cmd_default.h>
87
88#define CONFIG_CMD_BMODE
89#define CONFIG_CMD_BOOTZ
90#define CONFIG_CMD_SETEXPR
91#undef CONFIG_CMD_IMLS
92
93#define CONFIG_BOOTDELAY 3
94
95#define CONFIG_LOADADDR 0x12000000
96#define CONFIG_SYS_TEXT_BASE 0x17800000
97
98#define CONFIG_EXTRA_ENV_SETTINGS \
99 "script=u-boot.scr\0" \
100 "fit_file=/boot/system.itb\0" \
101 "loadaddr=0x12000000\0" \
102 "fit_addr_r=0x14000000\0" \
103 "uboot=/boot/u-boot.imx\0" \
104 "uboot_sz=d0000\0" \
105 "rescue_sys_addr=f0000\0" \
106 "rescue_sys_length=f10000\0" \
107 "panel=lb07wv8\0" \
108 "splashpos=m,m\0" \
109 "console=" CONFIG_CONSOLE_DEV "\0" \
110 "fdt_high=0xffffffff\0" \
111 "initrd_high=0xffffffff\0" \
112 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
113 "set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
114 "default ${board_type}\0" \
115 "get_env=mw ${loadaddr} 0 0x20000;" \
116 "mmc rescan;" \
117 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
118 "env import -t ${loadaddr}\0" \
119 "default_env=mw ${loadaddr} 0 0x20000;" \
120 "env export -t ${loadaddr} serial# ethaddr eth1addr " \
121 "board_type panel;" \
122 "env default -a;" \
123 "env import -t ${loadaddr}\0" \
124 "loadbootscript=" \
125 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
126 "bootscript=echo Running bootscript from mmc ...; " \
127 "source\0" \
128 "mmcpart=1\0" \
129 "mmcdev=0\0" \
130 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
131 "mmcargs=setenv bootargs console=${console},${baudrate} " \
132 "root=${mmcroot}\0" \
133 "mmcboot=echo Booting from mmc ...; " \
134 "run mmcargs addmtd addmisc set_fit_default;" \
135 "bootm ${fit_addr_r}\0" \
136 "mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
137 "${fit_file}\0" \
138 "mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
139 "${uboot}\0" \
140 "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
141 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
142 "setexpr uboot_maxsize ${uboot_sz} - 400;" \
143 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
144 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
145 "sf write ${loadaddr} 400 ${filesize};" \
146 "sf read ${cmp_buf} 400 ${uboot_sz};" \
147 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
148 "ubiboot=echo Booting from ubi ...; " \
149 "run ubiargs addmtd addmisc set_fit_default;" \
150 "bootm ${fit_addr_r}\0" \
151 "ubifs_load_fit=sf probe;ubi part ubi 2048;ubifsmount ubi:rootfs;" \
152 "ubifsload ${fit_addr_r} /boot/system.itb; " \
153 "imi ${fit_addr_r}\0 " \
154 "rescueargs=setenv bootargs console=${console},${baudrate} " \
155 "root=/dev/ram rw\0 " \
156 "rescueboot=echo Booting rescue system from NOR ...; " \
157 "run rescueargs addmtd addmisc set_fit_default;" \
158 "bootm ${fit_addr_r}\0" \
159 "rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
160 "${rescue_sys_length}; imi ${fit_addr_r}\0" \
161 CONFIG_EXTRA_ENV_BOARD_SETTINGS
162
163#define CONFIG_BOOTCOMMAND \
164 "mmc dev ${mmcdev};" \
165 "if mmc rescan; then " \
166 "if run loadbootscript; then " \
167 "run bootscript; " \
168 "else " \
169 "if run mmc_load_fit; then " \
170 "run mmcboot; " \
171 "else " \
172 "if run ubifs_load_fit; then " \
173 "run ubiboot; " \
174 "else " \
175 "if run rescue_load_fit; then " \
176 "run rescueboot; " \
177 "else " \
178 "echo RESCUE SYSTEM BOOT " \
179 "FAILURE;" \
180 "fi; " \
181 "fi; " \
182 "fi; " \
183 "fi; " \
184 "else " \
185 "if run ubifs_load_fit; then " \
186 "run ubiboot; " \
187 "else " \
188 "if run rescue_load_fit; then " \
189 "run rescueboot; " \
190 "else " \
191 "echo RESCUE SYSTEM BOOT FAILURE;" \
192 "fi; " \
193 "fi; " \
194 "fi"
195
196#define CONFIG_ARP_TIMEOUT 200UL
197
198/* Miscellaneous configurable options */
199#define CONFIG_SYS_LONGHELP
200#define CONFIG_SYS_HUSH_PARSER
201#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
202#define CONFIG_AUTO_COMPLETE
203#define CONFIG_SYS_CBSIZE 256
204
205/* Print Buffer Size */
206#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
207#define CONFIG_SYS_MAXARGS 16
208#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
209
210#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
211#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
212#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
213
214#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
215
216#define CONFIG_CMDLINE_EDITING
217#define CONFIG_STACKSIZE (128 * 1024)
218
219/* Physical Memory Map */
220#define CONFIG_NR_DRAM_BANKS 1
221#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
222
223#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
224#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
225#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
226
227#define CONFIG_SYS_INIT_SP_OFFSET \
228 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
229#define CONFIG_SYS_INIT_SP_ADDR \
230 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
231
232/* FLASH and environment organization */
233#define CONFIG_SYS_NO_FLASH
234
235#define CONFIG_ENV_SIZE (12 * 1024)
236#define CONFIG_ENV_IS_IN_SPI_FLASH
237#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
238#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
239#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
240#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
241#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
242#define CONFIG_ENV_SECT_SIZE (0x010000)
243#define CONFIG_ENV_OFFSET (0x0d0000)
244#define CONFIG_ENV_OFFSET_REDUND (0x0e0000)
245
246#define CONFIG_OF_LIBFDT
247
248#define CONFIG_CMD_CACHE
249
250#define CONFIG_SYS_FSL_USDHC_NUM 2
251
252/* I2C */
253#define CONFIG_CMD_I2C
254#define CONFIG_SYS_I2C
255#define CONFIG_SYS_I2C_MXC
256#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
257#define CONFIG_SYS_I2C_SPEED 100000
258#define CONFIG_SYS_I2C_SLAVE 0x7f
259#define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} }
260
261#define CONFIG_CMD_GPIO
262
263/* NAND stuff */
264#define CONFIG_CMD_NAND
265#define CONFIG_CMD_NAND_TRIMFFS
266#define CONFIG_NAND_MXS
267#define CONFIG_SYS_MAX_NAND_DEVICE 1
268#define CONFIG_SYS_NAND_BASE 0x40000000
269#define CONFIG_SYS_NAND_5_ADDR_CYCLE
270#define CONFIG_SYS_NAND_ONFI_DETECTION
271
272/* DMA stuff, needed for GPMI/MXS NAND support */
273#define CONFIG_APBH_DMA
274#define CONFIG_APBH_DMA_BURST
275#define CONFIG_APBH_DMA_BURST8
276
277/* RTC */
278#define CONFIG_SYS_I2C_RTC_ADDR 0x68
279#define CONFIG_SYS_RTC_BUS_NUM 2
280#define CONFIG_RTC_M41T11
281#define CONFIG_CMD_DATE
282
283/* USB Configs */
284#define CONFIG_CMD_USB
285#define CONFIG_CMD_FAT
286#define CONFIG_USB_EHCI
287#define CONFIG_USB_EHCI_MX6
288#define CONFIG_USB_STORAGE
289#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
290#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
291#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
292#define CONFIG_MXC_USB_FLAGS 0
293
294/* UBI support */
295#define CONFIG_CMD_MTDPARTS
296#define CONFIG_MTD_PARTITIONS
297#define CONFIG_MTD_DEVICE
298#define CONFIG_RBTREE
299#define CONFIG_LZO
300#define CONFIG_CMD_UBI
301#define CONFIG_CMD_UBIFS
302
303#define CONFIG_MTD_UBI_FASTMAP
304#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 1
305
306#define CONFIG_HW_WATCHDOG
307#define CONFIG_IMX_WATCHDOG
308
309#define CONFIG_FIT
310
311/* Framebuffer */
312#define CONFIG_VIDEO
313#define CONFIG_VIDEO_IPUV3
314/* check this console not needed, after test remove it */
315#define CONFIG_CFB_CONSOLE
316#define CONFIG_VGA_AS_SINGLE_DEVICE
317#define CONFIG_SYS_CONSOLE_IS_IN_ENV
318#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
319#define CONFIG_VIDEO_BMP_RLE8
320#define CONFIG_SPLASH_SCREEN
321#define CONFIG_SPLASH_SCREEN_ALIGN
322#define CONFIG_BMP_16BPP
323#define CONFIG_VIDEO_LOGO
324#define CONFIG_VIDEO_BMP_LOGO
325#define CONFIG_IPUV3_CLK 198000000
326#define CONFIG_IMX_VIDEO_SKIP
327
328#define CONFIG_CMD_BMP
329
330#define CONFIG_PWM_IMX
331#define CONFIG_IMX6_PWM_PER_CLK 66000000
332
333#endif /* __ARISTAINETOS_COMMON_CONFIG_H */