blob: a1ba42e2f3a2c3a4abc625af674a4599af451f38 [file] [log] [blame]
wdenkc6097192002-11-03 00:24:07 +00001/*
2 * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
3 * Andreas Heppel <aheppel@sysgo.de>
4 *
5 * (C) Copyright 2002
6 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
7 * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
8 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02009 * SPDX-License-Identifier: GPL-2.0+
wdenkc6097192002-11-03 00:24:07 +000010 */
11
12/*
13 * PCI routines
14 */
15
16#include <common.h>
Simon Glass0098e172014-04-10 20:01:30 -060017#include <bootretry.h>
Simon Glass18d66532014-04-10 20:01:25 -060018#include <cli.h>
wdenkc6097192002-11-03 00:24:07 +000019#include <command.h>
wdenkc6097192002-11-03 00:24:07 +000020#include <asm/processor.h>
21#include <asm/io.h>
wdenkc6097192002-11-03 00:24:07 +000022#include <pci.h>
23
wdenkc6097192002-11-03 00:24:07 +000024/*
25 * Follows routines for the output of infos about devices on PCI bus.
26 */
27
28void pci_header_show(pci_dev_t dev);
29void pci_header_show_brief(pci_dev_t dev);
30
31/*
32 * Subroutine: pciinfo
33 *
34 * Description: Show information about devices on PCI bus.
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020035 * Depending on the define CONFIG_SYS_SHORT_PCI_LISTING
wdenkc6097192002-11-03 00:24:07 +000036 * the output will be more or less exhaustive.
37 *
38 * Inputs: bus_no the number of the bus to be scanned.
39 *
40 * Return: None
41 *
42 */
43void pciinfo(int BusNum, int ShortPCIListing)
44{
45 int Device;
46 int Function;
47 unsigned char HeaderType;
48 unsigned short VendorID;
49 pci_dev_t dev;
50
51 printf("Scanning PCI devices on bus %d\n", BusNum);
52
53 if (ShortPCIListing) {
54 printf("BusDevFun VendorId DeviceId Device Class Sub-Class\n");
55 printf("_____________________________________________________________\n");
56 }
57
58 for (Device = 0; Device < PCI_MAX_PCI_DEVICES; Device++) {
59 HeaderType = 0;
60 VendorID = 0;
61 for (Function = 0; Function < PCI_MAX_PCI_FUNCTIONS; Function++) {
62 /*
63 * If this is not a multi-function device, we skip the rest.
64 */
65 if (Function && !(HeaderType & 0x80))
66 break;
67
68 dev = PCI_BDF(BusNum, Device, Function);
69
70 pci_read_config_word(dev, PCI_VENDOR_ID, &VendorID);
71 if ((VendorID == 0xFFFF) || (VendorID == 0x0000))
72 continue;
73
wdenkc7de8292002-11-19 11:04:11 +000074 if (!Function) pci_read_config_byte(dev, PCI_HEADER_TYPE, &HeaderType);
wdenkc6097192002-11-03 00:24:07 +000075
76 if (ShortPCIListing)
77 {
78 printf("%02x.%02x.%02x ", BusNum, Device, Function);
79 pci_header_show_brief(dev);
80 }
81 else
82 {
83 printf("\nFound PCI device %02x.%02x.%02x:\n",
84 BusNum, Device, Function);
85 pci_header_show(dev);
86 }
87 }
88 }
89}
90
wdenkc6097192002-11-03 00:24:07 +000091
92/*
93 * Subroutine: pci_header_show_brief
94 *
95 * Description: Reads and prints the header of the
Wolfgang Denk53677ef2008-05-20 16:00:29 +020096 * specified PCI device in short form.
wdenkc6097192002-11-03 00:24:07 +000097 *
98 * Inputs: dev Bus+Device+Function number
99 *
100 * Return: None
101 *
102 */
103void pci_header_show_brief(pci_dev_t dev)
104{
105 u16 vendor, device;
106 u8 class, subclass;
107
108 pci_read_config_word(dev, PCI_VENDOR_ID, &vendor);
109 pci_read_config_word(dev, PCI_DEVICE_ID, &device);
110 pci_read_config_byte(dev, PCI_CLASS_CODE, &class);
111 pci_read_config_byte(dev, PCI_CLASS_SUB_CODE, &subclass);
112
wdenk5d232d02003-05-22 22:52:13 +0000113 printf("0x%.4x 0x%.4x %-23s 0x%.2x\n",
wdenkc6097192002-11-03 00:24:07 +0000114 vendor, device,
Peter Tyser983eb9d2010-10-29 17:59:27 -0500115 pci_class_str(class), subclass);
wdenkc6097192002-11-03 00:24:07 +0000116}
117
118/*
119 * Subroutine: PCI_Header_Show
120 *
121 * Description: Reads the header of the specified PCI device.
122 *
123 * Inputs: BusDevFunc Bus+Device+Function number
124 *
125 * Return: None
126 *
127 */
128void pci_header_show(pci_dev_t dev)
129{
130 u8 _byte, header_type;
131 u16 _word;
132 u32 _dword;
133
134#define PRINT(msg, type, reg) \
135 pci_read_config_##type(dev, reg, &_##type); \
136 printf(msg, _##type)
137
138#define PRINT2(msg, type, reg, func) \
139 pci_read_config_##type(dev, reg, &_##type); \
140 printf(msg, _##type, func(_##type))
141
142 pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
143
144 PRINT (" vendor ID = 0x%.4x\n", word, PCI_VENDOR_ID);
145 PRINT (" device ID = 0x%.4x\n", word, PCI_DEVICE_ID);
146 PRINT (" command register = 0x%.4x\n", word, PCI_COMMAND);
147 PRINT (" status register = 0x%.4x\n", word, PCI_STATUS);
148 PRINT (" revision ID = 0x%.2x\n", byte, PCI_REVISION_ID);
149 PRINT2(" class code = 0x%.2x (%s)\n", byte, PCI_CLASS_CODE,
Peter Tyser983eb9d2010-10-29 17:59:27 -0500150 pci_class_str);
wdenkc6097192002-11-03 00:24:07 +0000151 PRINT (" sub class code = 0x%.2x\n", byte, PCI_CLASS_SUB_CODE);
152 PRINT (" programming interface = 0x%.2x\n", byte, PCI_CLASS_PROG);
153 PRINT (" cache line = 0x%.2x\n", byte, PCI_CACHE_LINE_SIZE);
154 PRINT (" latency time = 0x%.2x\n", byte, PCI_LATENCY_TIMER);
155 PRINT (" header type = 0x%.2x\n", byte, PCI_HEADER_TYPE);
156 PRINT (" BIST = 0x%.2x\n", byte, PCI_BIST);
157 PRINT (" base address 0 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_0);
wdenkc6097192002-11-03 00:24:07 +0000158
wdenk7c7a23b2002-12-07 00:20:59 +0000159 switch (header_type & 0x03) {
160 case PCI_HEADER_TYPE_NORMAL: /* "normal" PCI device */
161 PRINT (" base address 1 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_1);
162 PRINT (" base address 2 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_2);
163 PRINT (" base address 3 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_3);
164 PRINT (" base address 4 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_4);
165 PRINT (" base address 5 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_5);
166 PRINT (" cardBus CIS pointer = 0x%.8x\n", dword, PCI_CARDBUS_CIS);
167 PRINT (" sub system vendor ID = 0x%.4x\n", word, PCI_SUBSYSTEM_VENDOR_ID);
168 PRINT (" sub system ID = 0x%.4x\n", word, PCI_SUBSYSTEM_ID);
169 PRINT (" expansion ROM base address = 0x%.8x\n", dword, PCI_ROM_ADDRESS);
170 PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE);
171 PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN);
172 PRINT (" min Grant = 0x%.2x\n", byte, PCI_MIN_GNT);
173 PRINT (" max Latency = 0x%.2x\n", byte, PCI_MAX_LAT);
174 break;
wdenk8bde7f72003-06-27 21:31:46 +0000175
wdenk7c7a23b2002-12-07 00:20:59 +0000176 case PCI_HEADER_TYPE_BRIDGE: /* PCI-to-PCI bridge */
177
178 PRINT (" base address 1 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_1);
wdenkc6097192002-11-03 00:24:07 +0000179 PRINT (" primary bus number = 0x%.2x\n", byte, PCI_PRIMARY_BUS);
180 PRINT (" secondary bus number = 0x%.2x\n", byte, PCI_SECONDARY_BUS);
181 PRINT (" subordinate bus number = 0x%.2x\n", byte, PCI_SUBORDINATE_BUS);
182 PRINT (" secondary latency timer = 0x%.2x\n", byte, PCI_SEC_LATENCY_TIMER);
183 PRINT (" IO base = 0x%.2x\n", byte, PCI_IO_BASE);
184 PRINT (" IO limit = 0x%.2x\n", byte, PCI_IO_LIMIT);
185 PRINT (" secondary status = 0x%.4x\n", word, PCI_SEC_STATUS);
186 PRINT (" memory base = 0x%.4x\n", word, PCI_MEMORY_BASE);
187 PRINT (" memory limit = 0x%.4x\n", word, PCI_MEMORY_LIMIT);
188 PRINT (" prefetch memory base = 0x%.4x\n", word, PCI_PREF_MEMORY_BASE);
189 PRINT (" prefetch memory limit = 0x%.4x\n", word, PCI_PREF_MEMORY_LIMIT);
190 PRINT (" prefetch memory base upper = 0x%.8x\n", dword, PCI_PREF_BASE_UPPER32);
191 PRINT (" prefetch memory limit upper = 0x%.8x\n", dword, PCI_PREF_LIMIT_UPPER32);
192 PRINT (" IO base upper 16 bits = 0x%.4x\n", word, PCI_IO_BASE_UPPER16);
193 PRINT (" IO limit upper 16 bits = 0x%.4x\n", word, PCI_IO_LIMIT_UPPER16);
194 PRINT (" expansion ROM base address = 0x%.8x\n", dword, PCI_ROM_ADDRESS1);
195 PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE);
196 PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN);
197 PRINT (" bridge control = 0x%.4x\n", word, PCI_BRIDGE_CONTROL);
wdenk7c7a23b2002-12-07 00:20:59 +0000198 break;
199
200 case PCI_HEADER_TYPE_CARDBUS: /* PCI-to-CardBus bridge */
201
202 PRINT (" capabilities = 0x%.2x\n", byte, PCI_CB_CAPABILITY_LIST);
203 PRINT (" secondary status = 0x%.4x\n", word, PCI_CB_SEC_STATUS);
204 PRINT (" primary bus number = 0x%.2x\n", byte, PCI_CB_PRIMARY_BUS);
205 PRINT (" CardBus number = 0x%.2x\n", byte, PCI_CB_CARD_BUS);
206 PRINT (" subordinate bus number = 0x%.2x\n", byte, PCI_CB_SUBORDINATE_BUS);
wdenk8bde7f72003-06-27 21:31:46 +0000207 PRINT (" CardBus latency timer = 0x%.2x\n", byte, PCI_CB_LATENCY_TIMER);
wdenk7c7a23b2002-12-07 00:20:59 +0000208 PRINT (" CardBus memory base 0 = 0x%.8x\n", dword, PCI_CB_MEMORY_BASE_0);
209 PRINT (" CardBus memory limit 0 = 0x%.8x\n", dword, PCI_CB_MEMORY_LIMIT_0);
210 PRINT (" CardBus memory base 1 = 0x%.8x\n", dword, PCI_CB_MEMORY_BASE_1);
211 PRINT (" CardBus memory limit 1 = 0x%.8x\n", dword, PCI_CB_MEMORY_LIMIT_1);
212 PRINT (" CardBus IO base 0 = 0x%.4x\n", word, PCI_CB_IO_BASE_0);
213 PRINT (" CardBus IO base high 0 = 0x%.4x\n", word, PCI_CB_IO_BASE_0_HI);
214 PRINT (" CardBus IO limit 0 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_0);
215 PRINT (" CardBus IO limit high 0 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_0_HI);
216 PRINT (" CardBus IO base 1 = 0x%.4x\n", word, PCI_CB_IO_BASE_1);
217 PRINT (" CardBus IO base high 1 = 0x%.4x\n", word, PCI_CB_IO_BASE_1_HI);
218 PRINT (" CardBus IO limit 1 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_1);
219 PRINT (" CardBus IO limit high 1 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_1_HI);
220 PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE);
221 PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN);
222 PRINT (" bridge control = 0x%.4x\n", word, PCI_CB_BRIDGE_CONTROL);
223 PRINT (" subvendor ID = 0x%.4x\n", word, PCI_CB_SUBSYSTEM_VENDOR_ID);
224 PRINT (" subdevice ID = 0x%.4x\n", word, PCI_CB_SUBSYSTEM_ID);
225 PRINT (" PC Card 16bit base address = 0x%.8x\n", dword, PCI_CB_LEGACY_MODE_BASE);
226 break;
wdenk8bde7f72003-06-27 21:31:46 +0000227
wdenk7c7a23b2002-12-07 00:20:59 +0000228 default:
229 printf("unknown header\n");
wdenk8bde7f72003-06-27 21:31:46 +0000230 break;
wdenkc6097192002-11-03 00:24:07 +0000231 }
232
233#undef PRINT
234#undef PRINT2
235}
236
237/* Convert the "bus.device.function" identifier into a number.
238 */
239static pci_dev_t get_pci_dev(char* name)
240{
241 char cnum[12];
242 int len, i, iold, n;
243 int bdfs[3] = {0,0,0};
244
245 len = strlen(name);
246 if (len > 8)
247 return -1;
248 for (i = 0, iold = 0, n = 0; i < len; i++) {
249 if (name[i] == '.') {
250 memcpy(cnum, &name[iold], i - iold);
251 cnum[i - iold] = '\0';
252 bdfs[n++] = simple_strtoul(cnum, NULL, 16);
253 iold = i + 1;
254 }
255 }
256 strcpy(cnum, &name[iold]);
257 if (n == 0)
258 n = 1;
259 bdfs[n] = simple_strtoul(cnum, NULL, 16);
260 return PCI_BDF(bdfs[0], bdfs[1], bdfs[2]);
261}
262
263static int pci_cfg_display(pci_dev_t bdf, ulong addr, ulong size, ulong length)
264{
265#define DISP_LINE_LEN 16
266 ulong i, nbytes, linebytes;
267 int rc = 0;
268
269 if (length == 0)
270 length = 0x40 / size; /* Standard PCI configuration space */
271
272 /* Print the lines.
273 * once, and all accesses are with the specified bus width.
274 */
275 nbytes = length * size;
276 do {
277 uint val4;
278 ushort val2;
279 u_char val1;
280
281 printf("%08lx:", addr);
282 linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes;
283 for (i=0; i<linebytes; i+= size) {
284 if (size == 4) {
285 pci_read_config_dword(bdf, addr, &val4);
286 printf(" %08x", val4);
287 } else if (size == 2) {
288 pci_read_config_word(bdf, addr, &val2);
289 printf(" %04x", val2);
290 } else {
291 pci_read_config_byte(bdf, addr, &val1);
292 printf(" %02x", val1);
293 }
294 addr += size;
295 }
296 printf("\n");
297 nbytes -= linebytes;
298 if (ctrlc()) {
299 rc = 1;
300 break;
301 }
302 } while (nbytes > 0);
303
304 return (rc);
305}
306
307static int pci_cfg_write (pci_dev_t bdf, ulong addr, ulong size, ulong value)
308{
309 if (size == 4) {
310 pci_write_config_dword(bdf, addr, value);
311 }
312 else if (size == 2) {
313 ushort val = value & 0xffff;
314 pci_write_config_word(bdf, addr, val);
315 }
316 else {
317 u_char val = value & 0xff;
318 pci_write_config_byte(bdf, addr, val);
319 }
320 return 0;
321}
322
323static int
324pci_cfg_modify (pci_dev_t bdf, ulong addr, ulong size, ulong value, int incrflag)
325{
326 ulong i;
327 int nbytes;
wdenkc6097192002-11-03 00:24:07 +0000328 uint val4;
329 ushort val2;
330 u_char val1;
331
332 /* Print the address, followed by value. Then accept input for
333 * the next value. A non-converted value exits.
334 */
335 do {
336 printf("%08lx:", addr);
337 if (size == 4) {
338 pci_read_config_dword(bdf, addr, &val4);
339 printf(" %08x", val4);
340 }
341 else if (size == 2) {
342 pci_read_config_word(bdf, addr, &val2);
343 printf(" %04x", val2);
344 }
345 else {
346 pci_read_config_byte(bdf, addr, &val1);
347 printf(" %02x", val1);
348 }
349
Simon Glasse1bf8242014-04-10 20:01:27 -0600350 nbytes = cli_readline(" ? ");
wdenkc6097192002-11-03 00:24:07 +0000351 if (nbytes == 0 || (nbytes == 1 && console_buffer[0] == '-')) {
352 /* <CR> pressed as only input, don't modify current
353 * location and move to next. "-" pressed will go back.
354 */
355 if (incrflag)
356 addr += nbytes ? -size : size;
357 nbytes = 1;
Simon Glassb26440f2014-04-10 20:01:31 -0600358 /* good enough to not time out */
359 bootretry_reset_cmd_timeout();
wdenkc6097192002-11-03 00:24:07 +0000360 }
361#ifdef CONFIG_BOOT_RETRY_TIME
362 else if (nbytes == -2) {
363 break; /* timed out, exit the command */
364 }
365#endif
366 else {
367 char *endp;
368 i = simple_strtoul(console_buffer, &endp, 16);
369 nbytes = endp - console_buffer;
370 if (nbytes) {
wdenkc6097192002-11-03 00:24:07 +0000371 /* good enough to not time out
372 */
Simon Glassb26440f2014-04-10 20:01:31 -0600373 bootretry_reset_cmd_timeout();
wdenkc6097192002-11-03 00:24:07 +0000374 pci_cfg_write (bdf, addr, size, i);
375 if (incrflag)
376 addr += size;
377 }
378 }
379 } while (nbytes);
380
381 return 0;
382}
383
384/* PCI Configuration Space access commands
385 *
386 * Syntax:
387 * pci display[.b, .w, .l] bus.device.function} [addr] [len]
388 * pci next[.b, .w, .l] bus.device.function [addr]
389 * pci modify[.b, .w, .l] bus.device.function [addr]
390 * pci write[.b, .w, .l] bus.device.function addr value
391 */
Kim Phillips088f1b12012-10-29 13:34:31 +0000392static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
wdenkc6097192002-11-03 00:24:07 +0000393{
394 ulong addr = 0, value = 0, size = 0;
395 pci_dev_t bdf = 0;
396 char cmd = 's';
397
398 if (argc > 1)
399 cmd = argv[1][0];
400
401 switch (cmd) {
402 case 'd': /* display */
403 case 'n': /* next */
404 case 'm': /* modify */
405 case 'w': /* write */
406 /* Check for a size specification. */
407 size = cmd_get_data_size(argv[1], 4);
408 if (argc > 3)
409 addr = simple_strtoul(argv[3], NULL, 16);
410 if (argc > 4)
411 value = simple_strtoul(argv[4], NULL, 16);
412 case 'h': /* header */
413 if (argc < 3)
414 goto usage;
415 if ((bdf = get_pci_dev(argv[2])) == -1)
416 return 1;
417 break;
John Schmoller96d61602010-10-22 00:20:23 -0500418#ifdef CONFIG_CMD_PCI_ENUM
419 case 'e':
420 break;
421#endif
wdenkc6097192002-11-03 00:24:07 +0000422 default: /* scan bus */
423 value = 1; /* short listing */
424 bdf = 0; /* bus number */
425 if (argc > 1) {
426 if (argv[argc-1][0] == 'l') {
427 value = 0;
428 argc--;
429 }
430 if (argc > 1)
431 bdf = simple_strtoul(argv[1], NULL, 16);
432 }
433 pciinfo(bdf, value);
434 return 0;
435 }
436
437 switch (argv[1][0]) {
438 case 'h': /* header */
439 pci_header_show(bdf);
440 return 0;
441 case 'd': /* display */
442 return pci_cfg_display(bdf, addr, size, value);
John Schmoller96d61602010-10-22 00:20:23 -0500443#ifdef CONFIG_CMD_PCI_ENUM
444 case 'e':
445 pci_init();
446 return 0;
447#endif
wdenkc6097192002-11-03 00:24:07 +0000448 case 'n': /* next */
449 if (argc < 4)
450 goto usage;
451 return pci_cfg_modify(bdf, addr, size, value, 0);
452 case 'm': /* modify */
453 if (argc < 4)
454 goto usage;
455 return pci_cfg_modify(bdf, addr, size, value, 1);
456 case 'w': /* write */
457 if (argc < 5)
458 goto usage;
459 return pci_cfg_write(bdf, addr, size, value);
460 }
461
462 return 1;
463 usage:
Simon Glass4c12eeb2011-12-10 08:44:01 +0000464 return CMD_RET_USAGE;
wdenkc6097192002-11-03 00:24:07 +0000465}
466
wdenk8bde7f72003-06-27 21:31:46 +0000467/***************************************************/
468
Kim Phillips088f1b12012-10-29 13:34:31 +0000469#ifdef CONFIG_SYS_LONGHELP
470static char pci_help_text[] =
wdenk8bde7f72003-06-27 21:31:46 +0000471 "[bus] [long]\n"
472 " - short or long list of PCI devices on bus 'bus'\n"
John Schmoller96d61602010-10-22 00:20:23 -0500473#ifdef CONFIG_CMD_PCI_ENUM
474 "pci enum\n"
475 " - re-enumerate PCI buses\n"
476#endif
wdenk8bde7f72003-06-27 21:31:46 +0000477 "pci header b.d.f\n"
478 " - show header of PCI device 'bus.device.function'\n"
479 "pci display[.b, .w, .l] b.d.f [address] [# of objects]\n"
480 " - display PCI configuration space (CFG)\n"
481 "pci next[.b, .w, .l] b.d.f address\n"
482 " - modify, read and keep CFG address\n"
483 "pci modify[.b, .w, .l] b.d.f address\n"
484 " - modify, auto increment CFG address\n"
485 "pci write[.b, .w, .l] b.d.f address value\n"
Kim Phillips088f1b12012-10-29 13:34:31 +0000486 " - write to CFG address";
487#endif
488
489U_BOOT_CMD(
490 pci, 5, 1, do_pci,
491 "list and access PCI Configuration Space", pci_help_text
wdenk8bde7f72003-06-27 21:31:46 +0000492);