blob: 516a26e9f1abeb69b9133f8e66ba977501195780 [file] [log] [blame]
Łukasz Dałek34cda7a2012-10-15 07:46:54 +00001/*
2 * iPAQ h2200 board configuration
3 *
4 * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#ifndef __CONFIG_H
22#define __CONFIG_H
23
24#define MACH_TYPE_H2200 341
25#define CONFIG_MACH_TYPE MACH_TYPE_H2200
26
27#define CONFIG_CPU_PXA25X 1
28#define CONFIG_BOARD_H2200
29
30#define CONFIG_SYS_NO_FLASH
31
32#define CONFIG_SYS_HZ 1000
33
34#define CONFIG_NR_DRAM_BANKS 1
35#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
36#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
37
38#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
39#define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE
40
41#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800
42
43#define CONFIG_ENV_SIZE 0x00040000
44#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
45
46#define CONFIG_ENV_IS_NOWHERE
47#define CONFIG_SYS_MAXARGS 16
48#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */
49
50/*
51 * iPAQ 1st stage bootloader loads 2nd stage bootloader
52 * at address 0xa0040000 but bootloader requires header
53 * which is 0x1000 long.
54 *
55 * --- Header begin ---
56 * .word 0xea0003fe ; b 0x1000
57 *
58 * .org 0x40
59 * .ascii "ECEC"
60 *
61 * .org 0x1000
62 * --- Header end ---
63 */
64
65#define CONFIG_SYS_TEXT_BASE 0xa0041000
66
67/*
68 * Static chips
69 */
70
71#define CONFIG_SYS_MSC0_VAL 0x246c7ffc
72#define CONFIG_SYS_MSC1_VAL 0x7ff07ff0
73#define CONFIG_SYS_MSC2_VAL 0x7ff07ff0
74
75/*
76 * PCMCIA and CF Interfaces
77 */
78
79#define CONFIG_SYS_MECR_VAL 0x00000000
80#define CONFIG_SYS_MCMEM0_VAL 0x00000000
81#define CONFIG_SYS_MCMEM1_VAL 0x00000000
82#define CONFIG_SYS_MCATT0_VAL 0x00000000
83#define CONFIG_SYS_MCATT1_VAL 0x00000000
84#define CONFIG_SYS_MCIO0_VAL 0x00000000
85#define CONFIG_SYS_MCIO1_VAL 0x00000000
86
87#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
88#define CONFIG_SYS_SXCNFG_VAL 0x00040004
89
90#define CONFIG_SYS_MDREFR_VAL 0x0099E018
91#define CONFIG_SYS_MDCNFG_VAL 0x01C801CB
92#define CONFIG_SYS_MDMRS_VAL 0x00220022
93
94#define CONFIG_SYS_PSSR_VAL 0x00000000
95#define CONFIG_SYS_CKEN 0x00004840
96#define CONFIG_SYS_CCCR 0x00000161
97
98/*
99 * GPIOs
100 */
101
102#define CONFIG_SYS_GPSR0_VAL 0x01000000
103#define CONFIG_SYS_GPSR1_VAL 0x00000000
104#define CONFIG_SYS_GPSR2_VAL 0x00010000
105
106#define CONFIG_SYS_GPCR0_VAL 0x00000000
107#define CONFIG_SYS_GPCR1_VAL 0x00000000
108#define CONFIG_SYS_GPCR2_VAL 0x00000000
109
110#define CONFIG_SYS_GPDR0_VAL 0xF7E38C00
111#define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83
112#define CONFIG_SYS_GPDR2_VAL 0x000157FF
113
114#define CONFIG_SYS_GAFR0_L_VAL 0x80401000
115#define CONFIG_SYS_GAFR0_U_VAL 0x00000112
116#define CONFIG_SYS_GAFR1_L_VAL 0x600A9550
117#define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA
118#define CONFIG_SYS_GAFR2_L_VAL 0x20000000
119#define CONFIG_SYS_GAFR2_U_VAL 0x00000000
120
121/*
122 * Serial port
123 */
124
125#define CONFIG_PXA_SERIAL
126#define CONFIG_FFUART
127#define CONFIG_CONS_INDEX 3
128
129#define CONFIG_BAUDRATE 115200
130#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 }
131
132#define CONFIG_CMD_IMPORTENV 1
133#define CONFIG_CMD_LOADB
134#define CONFIG_CMD_SOURCE
135#define CONFIG_CMD_RUN
136#define CONFIG_CMD_IMI
137
138#define CONFIG_FIT
139#define CONFIG_SETUP_MEMORY_TAGS
140#define CONFIG_CMDLINE_TAG
141#define CONFIG_INITRD_TAG
142
143/* Monitor Command Prompt */
144#define CONFIG_SYS_PROMPT "> "
145#define CONFIG_SYS_HUSH_PARSER
146#define CONFIG_SYS_PROMPT_HUSH_PS2 "$ "
147
148/* Console I/O Buffer Size */
149#define CONFIG_SYS_CBSIZE 256
150
151/* Print Buffer Size */
152#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
153 sizeof(CONFIG_SYS_PROMPT) + 16)
154
155#define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8"
156
Lukasz Daleka33fada2012-11-29 15:55:16 +0100157#define CONFIG_SYS_CONSOLE_IS_IN_ENV
158#define CONFIG_USB_DEV_PULLUP_GPIO 33
159/* USB VBUS GPIO 3 */
160
161#define CONFIG_CMD_NET
162#define CONFIG_CMD_PING
163
164#define CONFIG_BOOTDELAY 2
165#define CONFIG_BOOTCOMMAND \
166 "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
167 "if bootp ; then setenv downloaded 1 ; fi ; done ; " \
168 "source :script ; " \
169 "bootm ; "
170
171#define CONFIG_USB_GADGET_PXA2XX
172#define CONFIG_USB_ETHER
173#define CONFIG_USB_ETH_SUBSET
174
175#define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01"
176#define CONFIG_USBNET_HOST_ADDR "de:ad:be:ef:00:02"
177#define CONFIG_EXTRA_ENV_SETTINGS \
178 "stdin=serial\0" \
179 "stdout=serial\0" \
180 "stderr=serial\0"
181
Łukasz Dałek34cda7a2012-10-15 07:46:54 +0000182#endif /* __CONFIG_H */