blob: 7eaa392839142b272ffa7e54b75ef46529745c2e [file] [log] [blame]
Tom Rinida58dec2015-11-10 01:06:16 +00001#
2# SPDX-License-Identifier: GPL-2.0+
3#
4
Tom Rini3d482542015-11-16 20:29:51 -05005VERSION = 2016
Tom Rinib104b3d2016-06-06 17:43:54 -04006PATCHLEVEL = 07
Wolfgang Denk211e4752012-07-10 09:21:12 +02007SUBLEVEL =
Tom Rini19ce9242016-07-11 15:01:01 -04008EXTRAVERSION =
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +09009NAME =
Wolfgang Denkae6d1052008-01-13 00:59:21 +010010
Masahiro Yamada6825a952014-02-04 17:24:28 +090011# *DOCUMENTATION*
12# To see a list of typical targets execute "make help"
13# More info can be located in ./README
14# Comments in this file are targeted only to the developer, do not
15# expect to learn how to build the kernel reading this file.
16
Masahiro Yamada4d713be2015-07-05 01:56:57 +090017# o Do not use make's built-in rules and variables
18# (this increases performance and avoids hard-to-debug behaviour);
19# o Look for make include files relative to root of kernel src
20MAKEFLAGS += -rR --include-dir=$(CURDIR)
Masahiro Yamada6825a952014-02-04 17:24:28 +090021
22# Avoid funny character set dependencies
23unexport LC_ALL
24LC_COLLATE=C
25LC_NUMERIC=C
26export LC_COLLATE LC_NUMERIC
27
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090028# Avoid interference with shell env settings
29unexport GREP_OPTIONS
30
Masahiro Yamada6825a952014-02-04 17:24:28 +090031# We are using a recursive build, so we need to do a little thinking
32# to get the ordering right.
33#
34# Most importantly: sub-Makefiles should only ever modify files in
35# their own directory. If in some directory we have a dependency on
36# a file in another dir (which doesn't happen often, but it's often
37# unavoidable when linking the built-in.o targets which finally
38# turn into vmlinux), we will call a sub make in that other dir, and
39# after that we are sure that everything which is in that other dir
40# is now up to date.
41#
42# The only cases where we need to modify files which have global
43# effects are thus separated out and done before the recursive
44# descending is started. They are now explicitly listed as the
45# prepare rule.
46
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090047# Beautify output
48# ---------------------------------------------------------------------------
49#
50# Normally, we echo the whole command before executing it. By making
51# that echo $($(quiet)$(cmd)), we now have the possibility to set
52# $(quiet) to choose other forms of output instead, e.g.
53#
54# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
55# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
56#
57# If $(quiet) is empty, the whole command will be printed.
58# If it is set to "quiet_", only the short version will be printed.
59# If it is set to "silent_", nothing will be printed at all, since
60# the variable $(silent_cmd_cc_o_c) doesn't exist.
61#
62# A simple variant is to prefix commands with $(Q) - that's useful
63# for commands that shall be hidden in non-verbose mode.
64#
65# $(Q)ln $@ :<
66#
67# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
68# If KBUILD_VERBOSE equals 1 then the above command is displayed.
69#
Masahiro Yamada6825a952014-02-04 17:24:28 +090070# To put more focus on warnings, be less verbose as default
71# Use 'make V=1' to see the full commands
72
73ifeq ("$(origin V)", "command line")
74 KBUILD_VERBOSE = $(V)
wdenk7ebf7442002-11-02 23:17:16 +000075endif
Masahiro Yamada6825a952014-02-04 17:24:28 +090076ifndef KBUILD_VERBOSE
77 KBUILD_VERBOSE = 0
78endif
79
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090080ifeq ($(KBUILD_VERBOSE),1)
81 quiet =
82 Q =
83else
84 quiet=quiet_
85 Q = @
Masahiro Yamada6825a952014-02-04 17:24:28 +090086endif
87
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +090088# If the user is running make -s (silent mode), suppress echoing of
89# commands
90
91ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
92ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
93 quiet=silent_
94endif
95else # make-3.8x
96ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
97 quiet=silent_
98endif
Masahiro Yamada6825a952014-02-04 17:24:28 +090099endif
100
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900101export quiet Q KBUILD_VERBOSE
Masahiro Yamada6825a952014-02-04 17:24:28 +0900102
Masahiro Yamada9e414032014-02-04 17:24:24 +0900103# kbuild supports saving output files in a separate directory.
104# To locate output files in a separate directory two syntaxes are supported.
105# In both cases the working directory must be the root of the kernel src.
106# 1) O=
107# Use "make O=dir/to/store/output/files/"
Marian Balakowiczf9328632006-09-01 19:49:50 +0200108#
Masahiro Yamada9e414032014-02-04 17:24:24 +0900109# 2) Set KBUILD_OUTPUT
110# Set the environment variable KBUILD_OUTPUT to point to the directory
111# where the output files shall be placed.
112# export KBUILD_OUTPUT=dir/to/store/output/files/
113# make
Stefan Roese887e2ec2006-09-07 11:51:23 +0200114#
Masahiro Yamada9e414032014-02-04 17:24:24 +0900115# The O= assignment takes precedence over the KBUILD_OUTPUT environment
116# variable.
wdenk7ebf7442002-11-02 23:17:16 +0000117
Masahiro Yamada9e414032014-02-04 17:24:24 +0900118# KBUILD_SRC is set on invocation of make in OBJ directory
119# KBUILD_SRC is not intended to be used by the regular user (for now)
120ifeq ($(KBUILD_SRC),)
121
122# OK, Make called in directory where kernel src resides
123# Do we want to locate output files in a separate directory?
Marian Balakowiczf9328632006-09-01 19:49:50 +0200124ifeq ("$(origin O)", "command line")
Masahiro Yamada9e414032014-02-04 17:24:24 +0900125 KBUILD_OUTPUT := $(O)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200126endif
wdenk7ebf7442002-11-02 23:17:16 +0000127
Masahiro Yamada9e414032014-02-04 17:24:24 +0900128# That's our default target when none is given on the command line
129PHONY := _all
130_all:
131
132# Cancel implicit rules on top Makefile
133$(CURDIR)/Makefile Makefile: ;
134
135ifneq ($(KBUILD_OUTPUT),)
136# Invoke a second make in the output directory, passing relevant variables
137# check that the output directory actually exists
138saved-output := $(KBUILD_OUTPUT)
Masahiro Yamada5a449d72014-03-24 13:55:27 +0900139KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
140 && /bin/pwd)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900141$(if $(KBUILD_OUTPUT),, \
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900142 $(error failed to create output directory "$(saved-output)"))
Masahiro Yamada9e414032014-02-04 17:24:24 +0900143
144PHONY += $(MAKECMDGOALS) sub-make
145
146$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
147 @:
148
149sub-make: FORCE
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900150 $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
151 -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
Masahiro Yamada9e414032014-02-04 17:24:24 +0900152
153# Leave processing to above invocation of make
154skip-makefile := 1
155endif # ifneq ($(KBUILD_OUTPUT),)
156endif # ifeq ($(KBUILD_SRC),)
157
158# We process the rest of the Makefile if this is the final invocation of make
159ifeq ($(skip-makefile),)
160
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900161# Do not print "Entering directory ...",
162# but we want to display it when entering to the output directory
163# so that IDEs/editors are able to understand relative filenames.
164MAKEFLAGS += --no-print-directory
165
166# Call a source code checker (by default, "sparse") as part of the
167# C compilation.
168#
169# Use 'make C=1' to enable checking of only re-compiled files.
170# Use 'make C=2' to enable checking of *all* source files, regardless
171# of whether they are re-compiled or not.
172#
173# See the file "Documentation/sparse.txt" for more details, including
174# where to get the "sparse" utility.
175
176ifeq ("$(origin C)", "command line")
177 KBUILD_CHECKSRC = $(C)
178endif
179ifndef KBUILD_CHECKSRC
180 KBUILD_CHECKSRC = 0
181endif
182
183# Use make M=dir to specify directory of external module to build
184# Old syntax make ... SUBDIRS=$PWD is still supported
185# Setting the environment variable KBUILD_EXTMOD take precedence
186ifdef SUBDIRS
187 KBUILD_EXTMOD ?= $(SUBDIRS)
188endif
189
190ifeq ("$(origin M)", "command line")
191 KBUILD_EXTMOD := $(M)
192endif
193
Masahiro Yamada6825a952014-02-04 17:24:28 +0900194# If building an external module we do not care about the all: rule
195# but instead _all depend on modules
Masahiro Yamada9e414032014-02-04 17:24:24 +0900196PHONY += all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900197ifeq ($(KBUILD_EXTMOD),)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900198_all: all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900199else
200_all: modules
201endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900202
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +0900203ifeq ($(KBUILD_SRC),)
204 # building in the source tree
205 srctree := .
206else
207 ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
208 # building in a subdirectory of the source tree
209 srctree := ..
210 else
211 srctree := $(KBUILD_SRC)
212 endif
213endif
214objtree := .
Masahiro Yamada9e414032014-02-04 17:24:24 +0900215src := $(srctree)
216obj := $(objtree)
217
218VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
219
220export srctree objtree VPATH
221
Wolfgang Denk5013c092008-03-02 22:45:33 +0100222# Make sure CDPATH settings don't interfere
223unexport CDPATH
224
Marian Balakowiczf9328632006-09-01 19:49:50 +0200225#########################################################################
226
wdenk7ebf7442002-11-02 23:17:16 +0000227HOSTARCH := $(shell uname -m | \
228 sed -e s/i.86/x86/ \
229 -e s/sun4u/sparc64/ \
230 -e s/arm.*/arm/ \
231 -e s/sa110/arm/ \
232 -e s/ppc64/powerpc/ \
233 -e s/ppc/powerpc/ \
234 -e s/macppc/powerpc/\
235 -e s/sh.*/sh/)
236
237HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
238 sed -e 's/\(cygwin\).*/cygwin/')
239
240export HOSTARCH HOSTOS
241
wdenk7ebf7442002-11-02 23:17:16 +0000242#########################################################################
Marian Balakowiczf9328632006-09-01 19:49:50 +0200243
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400244# set default to nothing for native builds
Wolfgang Denka5284ef2007-03-06 18:01:47 +0100245ifeq ($(HOSTARCH),$(ARCH))
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400246CROSS_COMPILE ?=
wdenk7ebf7442002-11-02 23:17:16 +0000247endif
wdenk7ebf7442002-11-02 23:17:16 +0000248
Masahiro Yamada51148792014-07-30 14:08:17 +0900249KCONFIG_CONFIG ?= .config
250export KCONFIG_CONFIG
251
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900252# SHELL used by kbuild
253CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
254 else if [ -x /bin/bash ]; then echo /bin/bash; \
255 else echo sh; fi ; fi)
256
Jeroen Hofsteeb477fe42014-09-10 20:08:51 +0200257HOSTCC = cc
258HOSTCXX = c++
Simon Glass022885c2016-06-30 10:52:20 -0600259HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
260 $(if $(CONFIG_TOOLS_DEBUG),-g)
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900261HOSTCXXFLAGS = -O2
262
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900263ifeq ($(HOSTOS),cygwin)
264HOSTCFLAGS += -ansi
265endif
266
267# Mac OS X / Darwin's C preprocessor is Apple specific. It
268# generates numerous errors and warnings. We want to bypass it
269# and use GNU C's cpp. To do this we pass the -traditional-cpp
270# option to the compiler. Note that the -traditional-cpp flag
271# DOES NOT have the same semantics as GNU C's flag, all it does
272# is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
273#
274# Apple's linker is similar, thanks to the new 2 stage linking
275# multiple symbol definitions are treated as errors, hence the
276# -multiply_defined suppress option to turn off this error.
277#
278ifeq ($(HOSTOS),darwin)
279# get major and minor product version (e.g. '10' and '6' for Snow Leopard)
280DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
281DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
282
283os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
284 $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
285
286# Snow Leopards build environment has no longer restrictions as described above
287HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
288HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
289HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
Andreas Bießmann1fddd7b2015-02-09 00:06:10 +0100290
291# since Lion (10.7) ASLR is on by default, but we use linker generated lists
292# in some host tools which is a problem then ... so disable ASLR for these
293# tools
294HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900295endif
296
Masahiro Yamada6825a952014-02-04 17:24:28 +0900297# Decide whether to build built-in, modular, or both.
298# Normally, just do built-in.
299
300KBUILD_MODULES :=
301KBUILD_BUILTIN := 1
302
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900303# If we have only "make modules", don't compile built-in objects.
304# When we're building modules with modversions, we need to consider
305# the built-in objects during the descend as well, in order to
306# make sure the checksums are up to date before we record them.
Masahiro Yamada6825a952014-02-04 17:24:28 +0900307
308ifeq ($(MAKECMDGOALS),modules)
309 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
310endif
311
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900312# If we have "make <whatever> modules", compile modules
313# in addition to whatever we do anyway.
314# Just "make" or "make all" shall build modules as well
Masahiro Yamada6825a952014-02-04 17:24:28 +0900315
316# U-Boot does not need modules
317#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
318# KBUILD_MODULES := 1
319#endif
320
321#ifeq ($(MAKECMDGOALS),)
322# KBUILD_MODULES := 1
323#endif
324
325export KBUILD_MODULES KBUILD_BUILTIN
326export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
327
Masahiro Yamadabf4b3de2014-02-04 17:24:18 +0900328# We need some generic definitions (do not try to remake the file).
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900329scripts/Kbuild.include: ;
330include scripts/Kbuild.include
Masahiro Yamadabf4b3de2014-02-04 17:24:18 +0900331
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900332# Make variables (CC, etc...)
333
334AS = $(CROSS_COMPILE)as
335# Always use GNU ld
336ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
337LD = $(CROSS_COMPILE)ld.bfd
338else
339LD = $(CROSS_COMPILE)ld
340endif
341CC = $(CROSS_COMPILE)gcc
342CPP = $(CC) -E
343AR = $(CROSS_COMPILE)ar
344NM = $(CROSS_COMPILE)nm
345LDR = $(CROSS_COMPILE)ldr
346STRIP = $(CROSS_COMPILE)strip
347OBJCOPY = $(CROSS_COMPILE)objcopy
348OBJDUMP = $(CROSS_COMPILE)objdump
349AWK = awk
Masahiro Yamadaf77d7092014-05-12 11:45:55 +0900350PERL = perl
Masahiro Yamada51148792014-07-30 14:08:17 +0900351PYTHON = python
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900352DTC = dtc
353CHECK = sparse
354
355CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
356 -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
357
Masahiro Yamada3b612972014-08-31 15:16:53 +0900358KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900359
360KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
361 -Wno-format-security \
362 -fno-builtin -ffreestanding
363KBUILD_AFLAGS := -D__ASSEMBLY__
364
Masahiro Yamada74241452014-02-24 11:12:09 +0900365# Read UBOOTRELEASE from include/config/uboot.release (if it exists)
366UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
367UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +0900368
Masahiro Yamada74241452014-02-24 11:12:09 +0900369export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900370export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900371export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
372export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
Masahiro Yamada51148792014-07-30 14:08:17 +0900373export MAKE AWK PERL PYTHON
Masahiro Yamada15c939f2014-06-06 10:15:27 +0900374export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900375
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900376export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900377export KBUILD_CFLAGS KBUILD_AFLAGS
378
Masahiro Yamada6825a952014-02-04 17:24:28 +0900379# When compiling out-of-tree modules, put MODVERDIR in the module
380# tree rather than in the kernel tree. The kernel tree might
381# even be read-only.
382export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
383
384# Files to ignore in find ... statements
385
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900386export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
387 -name CVS -o -name .pc -o -name .hg -o -name .git \) \
388 -prune -o
Masahiro Yamada6825a952014-02-04 17:24:28 +0900389export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
390 --exclude CVS --exclude .pc --exclude .hg --exclude .git
391
392# ===========================================================================
393# Rules shared between *config targets and build targets
394
395# Basic helpers built in scripts/
396PHONY += scripts_basic
397scripts_basic:
398 $(Q)$(MAKE) $(build)=scripts/basic
399 $(Q)rm -f .tmp_quiet_recordmcount
400
401# To avoid any implicit rule to kick in, define an empty command.
402scripts/basic/%: scripts_basic ;
403
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900404PHONY += outputmakefile
405# outputmakefile generates a Makefile in the output directory, if using a
406# separate output directory. This allows convenient use of make in the
407# output directory.
408outputmakefile:
409ifneq ($(KBUILD_SRC),)
410 $(Q)ln -fsn $(srctree) source
411 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
412 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
413endif
414
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900415# To make sure we do not include .config for any of the *config targets
416# catch them early, and hand them over to scripts/kconfig/Makefile
417# It is allowed to specify more targets when calling make, including
418# mixing *config targets and build targets.
419# For example 'make oldconfig all'.
420# Detect when mixed targets is specified, and make a second invocation
421# of make so .config is not included in this case either (for *config).
Masahiro Yamada6825a952014-02-04 17:24:28 +0900422
Masahiro Yamada74241452014-02-24 11:12:09 +0900423version_h := include/generated/version_autogenerated.h
424timestamp_h := include/generated/timestamp_autogenerated.h
425
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900426no-dot-config-targets := clean clobber mrproper distclean \
Masahiro Yamada27651182014-02-21 15:45:11 +0900427 help %docs check% coccicheck \
Tom Rinic7ad5cb2014-10-13 08:38:55 -0400428 ubootversion backup
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900429
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900430config-targets := 0
431mixed-targets := 0
432dot-config := 1
433
434ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
435 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
436 dot-config := 0
437 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900438endif
439
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900440ifeq ($(KBUILD_EXTMOD),)
441 ifneq ($(filter config %config,$(MAKECMDGOALS)),)
442 config-targets := 1
Masahiro Yamada98bd0e02015-07-05 01:56:55 +0900443 ifneq ($(words $(MAKECMDGOALS)),1)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900444 mixed-targets := 1
445 endif
446 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900447endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900448
449ifeq ($(mixed-targets),1)
450# ===========================================================================
451# We're called with mixed targets (*config and build targets).
452# Handle them one by one.
453
Masahiro Yamadae7734402014-08-05 15:56:44 +0900454PHONY += $(MAKECMDGOALS) __build_one_by_one
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900455
Masahiro Yamadae7734402014-08-05 15:56:44 +0900456$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900457 @:
458
Masahiro Yamadae7734402014-08-05 15:56:44 +0900459__build_one_by_one:
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900460 $(Q)set -e; \
461 for i in $(MAKECMDGOALS); do \
462 $(MAKE) -f $(srctree)/Makefile $$i; \
463 done
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900464
465else
466ifeq ($(config-targets),1)
467# ===========================================================================
468# *config targets only - make sure prerequisites are updated, and descend
469# in scripts/kconfig to make the *config target
470
Masahiro Yamada51148792014-07-30 14:08:17 +0900471KBUILD_DEFCONFIG := sandbox_defconfig
472export KBUILD_DEFCONFIG KBUILD_KCONFIG
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900473
Masahiro Yamada51148792014-07-30 14:08:17 +0900474config: scripts_basic outputmakefile FORCE
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900475 $(Q)$(MAKE) $(build)=scripts/kconfig $@
Masahiro Yamada51148792014-07-30 14:08:17 +0900476
477%config: scripts_basic outputmakefile FORCE
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900478 $(Q)$(MAKE) $(build)=scripts/kconfig $@
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900479
480else
481# ===========================================================================
482# Build targets only - this includes vmlinux, arch specific targets, clean
483# targets and others. In general all targets except *config targets.
484
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900485ifeq ($(dot-config),1)
486# Read in config
Masahiro Yamada51148792014-07-30 14:08:17 +0900487-include include/config/auto.conf
488
489# Read in dependencies to all Kconfig* files, make sure to run
490# oldconfig if changes are detected.
491-include include/config/auto.conf.cmd
492
493# To avoid any implicit rule to kick in, define an empty command
494$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
495
496# If .config is newer than include/config/auto.conf, someone tinkered
497# with it and forgot to run make oldconfig.
498# if auto.conf.cmd is missing then we are probably in a cleaned tree so
499# we execute the config step to be sure to catch updated Kconfig files
500include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
501 $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
Masahiro Yamada5f9eb222015-03-13 18:08:55 +0900502 @# If the following part fails, include/config/auto.conf should be
503 @# deleted so "make silentoldconfig" will be re-run on the next build.
504 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
505 { rm -f include/config/auto.conf; false; }
506 @# include/config.h has been updated after "make silentoldconfig".
507 @# We need to touch include/config/auto.conf so it gets newer
508 @# than include/config.h.
509 @# Otherwise, 'make silentoldconfig' would be invoked twice.
510 $(Q)touch include/config/auto.conf
Masahiro Yamada51148792014-07-30 14:08:17 +0900511
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900512-include include/autoconf.mk
513-include include/autoconf.mk.dep
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900514
Masahiro Yamada51148792014-07-30 14:08:17 +0900515# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
516# is up-to-date. When we switch to a different board configuration, old CONFIG
517# macros are still remaining in include/config/auto.conf. Without the following
518# gimmick, wrong config.mk would be included leading nasty warnings/errors.
Masahiro Yamadacffcd282015-04-03 12:30:25 +0900519ifneq ($(wildcard $(KCONFIG_CONFIG)),)
520ifneq ($(wildcard include/config/auto.conf),)
521autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
522 include/config/auto.conf)
523ifeq ($(autoconf_is_old),)
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900524include config.mk
525include arch/$(ARCH)/Makefile
Masahiro Yamadaced07152014-02-04 17:24:21 +0900526endif
Masahiro Yamadacffcd282015-04-03 12:30:25 +0900527endif
528endif
Simon Glassfada9e22013-04-20 08:42:36 +0000529
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000530# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
531# that (or fail if absent). Otherwise, search for a linker script in a
532# standard location.
533
534ifndef LDSCRIPT
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900535 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000536 ifdef CONFIG_SYS_LDSCRIPT
537 # need to strip off double quotes
Masahiro Yamada4a377552014-02-25 19:26:48 +0900538 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000539 endif
540endif
541
Simon Glassee601972011-11-21 10:49:37 +0000542# If there is no specified link script, we look in a number of places for it
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000543ifndef LDSCRIPT
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000544 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900545 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000546 endif
547 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900548 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000549 endif
550 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900551 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
Simon Glassee601972011-11-21 10:49:37 +0000552 endif
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000553endif
554
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900555else
Masahiro Yamada51148792014-07-30 14:08:17 +0900556# Dummy target needed, because used as prerequisite
557include/config/auto.conf: ;
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900558endif # $(dot-config)
559
Masahiro Yamada4a8ed8e2014-08-22 19:42:29 +0900560ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
561KBUILD_CFLAGS += -Os
562else
563KBUILD_CFLAGS += -O2
564endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900565
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900566KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
Prabhakar Kushwaha687a7512015-07-02 12:00:17 +0530567KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900568
569KBUILD_CFLAGS += -g
570# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
571# option to the assembler.
572KBUILD_AFLAGS += -g
573
574# Report stack usage if supported
Masahiro Yamada5b1f1f42013-12-11 20:11:34 +0900575ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
576 KBUILD_CFLAGS += -fstack-usage
577endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900578
579KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
580
581# turn jbsr into jsr for m68k
582ifeq ($(ARCH),m68k)
583ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
584KBUILD_AFLAGS += -Wa,-gstabs,-S
585endif
586endif
587
Masahiro Yamada65bb6d82014-04-18 19:09:51 +0900588# Prohibit date/time macros, which would make the build non-deterministic
589KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
590
Masahiro Yamada4d713be2015-07-05 01:56:57 +0900591include scripts/Makefile.extrawarn
Masahiro Yamada6419e142014-08-05 15:56:43 +0900592
Masahiro Yamada0e6256d2014-04-15 14:47:40 +0900593# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
594KBUILD_CPPFLAGS += $(KCPPFLAGS)
595KBUILD_AFLAGS += $(KAFLAGS)
596KBUILD_CFLAGS += $(KCFLAGS)
597
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900598# Use UBOOTINCLUDE when you must reference the include/ directory.
599# Needed to be compatible with the O= option
Masahiro Yamadaf5c66bd2014-03-11 11:05:18 +0900600UBOOTINCLUDE := \
601 -Iinclude \
602 $(if $(KBUILD_SRC), -I$(srctree)/include) \
Albert ARIBAUD62e92072015-10-23 18:06:40 +0200603 $(if $(CONFIG_SYS_THUMB_BUILD), $(if $(CONFIG_HAS_THUMB2),, \
604 -I$(srctree)/arch/$(ARCH)/thumb1/include),) \
Masahiro Yamada51148792014-07-30 14:08:17 +0900605 -I$(srctree)/arch/$(ARCH)/include \
606 -include $(srctree)/include/linux/kconfig.h
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900607
608NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
609CHECKFLAGS += $(NOSTDINC_FLAGS)
610
611# FIX ME
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900612cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
613 $(NOSTDINC_FLAGS)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900614c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
615
wdenk7ebf7442002-11-02 23:17:16 +0000616#########################################################################
617# U-Boot objects....order is important (i.e. start must be first)
618
Masahiro Yamada9e414032014-02-04 17:24:24 +0900619HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200620
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900621libs-y += lib/
622libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900623libs-$(CONFIG_OF_EMBED) += dts/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900624libs-y += fs/
625libs-y += net/
626libs-y += disk/
627libs-y += drivers/
628libs-y += drivers/dma/
629libs-y += drivers/gpio/
630libs-y += drivers/i2c/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900631libs-y += drivers/mmc/
632libs-y += drivers/mtd/
633libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
634libs-y += drivers/mtd/onenand/
635libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
636libs-y += drivers/mtd/spi/
637libs-y += drivers/net/
638libs-y += drivers/net/phy/
639libs-y += drivers/pci/
640libs-y += drivers/power/ \
Masahiro Yamadae2906a52013-11-11 14:36:00 +0900641 drivers/power/fuel_gauge/ \
642 drivers/power/mfd/ \
643 drivers/power/pmic/ \
Przemyslaw Marczakaf41e8d2015-04-20 20:07:42 +0200644 drivers/power/battery/ \
645 drivers/power/regulator/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900646libs-y += drivers/spi/
647libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
648libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
Dinh Nguyen9bbd2132015-06-02 22:52:48 -0500649libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900650libs-y += drivers/serial/
Kishon Vijay Abraham I5b9ce0e2015-02-23 18:40:16 +0530651libs-y += drivers/usb/dwc3/
Sriram Dash93eb8f32016-04-05 14:41:19 +0530652libs-y += drivers/usb/common/
Simon Glass019808f2015-03-25 12:22:37 -0600653libs-y += drivers/usb/emul/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900654libs-y += drivers/usb/eth/
655libs-y += drivers/usb/gadget/
Kishon Vijay Abraham I5b9ce0e2015-02-23 18:40:16 +0530656libs-y += drivers/usb/gadget/udc/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900657libs-y += drivers/usb/host/
658libs-y += drivers/usb/musb/
659libs-y += drivers/usb/musb-new/
660libs-y += drivers/usb/phy/
661libs-y += drivers/usb/ulpi/
Simon Glass72a8cf82016-01-17 20:53:51 -0700662libs-y += cmd/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900663libs-y += common/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900664libs-$(CONFIG_API) += api/
665libs-$(CONFIG_HAS_POST) += post/
666libs-y += test/
Simon Glass2e7d35d2014-02-26 15:59:21 -0700667libs-y += test/dm/
Joe Hershberger421f86f2015-05-20 14:27:36 -0500668libs-$(CONFIG_UT_ENV) += test/env/
Marian Balakowiczf9328632006-09-01 19:49:50 +0200669
Masahiro Yamada33a02da2014-03-03 19:03:17 +0900670libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
Masahiro Yamada08e39a82013-11-11 14:35:55 +0900671
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900672libs-y := $(sort $(libs-y))
673
674u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
675
676u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
677
678libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
679
680u-boot-init := $(head-y)
681u-boot-main := $(libs-y)
682
wdenka8c7c702003-12-06 19:49:23 +0000683
wdenk4f7cb082003-09-11 23:06:34 +0000684# Add GCC lib
Masahiro Yamadacd2e46c2014-03-05 16:59:38 +0900685ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
Masahiro Yamadaa86cf892014-02-27 22:40:34 +0900686PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200687else
Masahiro Yamada6825a952014-02-04 17:24:28 +0900688PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200689endif
690PLATFORM_LIBS += $(PLATFORM_LIBGCC)
691export PLATFORM_LIBS
Alexey Brodkine75e73d2014-05-16 12:54:17 +0400692export PLATFORM_LIBGCC
wdenk3d3befa2004-03-14 15:06:13 +0000693
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400694# Special flags for CPP when processing the linker script.
695# Pass the version down so we can handle backwards compatibility
696# on the fly.
697LDPPFLAGS += \
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900698 -include $(srctree)/include/u-boot/u-boot.lds.h \
Simon Glass7e6403a2011-11-21 10:49:40 +0000699 -DCPUDIR=$(CPUDIR) \
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400700 $(shell $(LD) --version | \
701 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
702
wdenk7ebf7442002-11-02 23:17:16 +0000703#########################################################################
wdenkbdccc4f2003-08-05 17:43:17 +0000704#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +0000705
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400706ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
707BOARD_SIZE_CHECK = \
708 @actual=`wc -c $@ | awk '{print $$1}'`; \
Joe Hershbergerd060e6f2012-11-08 10:19:09 +0000709 limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400710 if test $$actual -gt $$limit; then \
Joe Hershbergerd060e6f2012-11-08 10:19:09 +0000711 echo "$@ exceeds file size limit:" >&2 ; \
712 echo " limit: $$limit bytes" >&2 ; \
713 echo " actual: $$actual bytes" >&2 ; \
714 echo " excess: $$((actual - limit)) bytes" >&2; \
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400715 exit 1; \
716 fi
717else
718BOARD_SIZE_CHECK =
719endif
720
Scott Wood8137af12013-12-14 11:47:32 +0800721# Statically apply RELA-style relocations (currently arm64 only)
722ifneq ($(CONFIG_STATIC_RELA),)
723# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
724DO_STATIC_RELA = \
725 start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
726 end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
Masahiro Yamada9e414032014-02-04 17:24:24 +0900727 tools/relocate-rela $(2) $(3) $$start $$end
Scott Wood8137af12013-12-14 11:47:32 +0800728else
729DO_STATIC_RELA =
730endif
731
Mike Frysinger3e883372009-06-15 00:25:19 -0400732# Always append ALL so that arch config.mk's can add custom ones
Stephen Warren7ed48482016-02-08 14:44:15 -0700733ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map u-boot.cfg binary_size_check
Haiying Wange935a372011-01-27 09:44:59 -0500734
Masahiro Yamada9e414032014-02-04 17:24:24 +0900735ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530736ifeq ($(CONFIG_SPL_FSL_PBL),y)
737ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
738else
Aneesh Bansal467a40d2015-06-16 10:36:00 +0530739ifneq ($(CONFIG_SECURE_BOOT), y)
740# For Secure Boot The Image needs to be signed and Header must also
741# be included. So The image has to be built explicitly
Masahiro Yamada9e414032014-02-04 17:24:24 +0900742ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530743endif
Aneesh Bansal467a40d2015-06-16 10:36:00 +0530744endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900745ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
746ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
747ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
Simon Glassad1ecd22016-01-31 18:10:50 -0700748ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
Masahiro Yamada2405d092014-05-15 20:37:51 +0900749ifeq ($(CONFIG_SPL_FRAMEWORK),y)
750ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
751endif
Simon Glass714a5622014-02-26 15:59:14 -0700752ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000753ifneq ($(CONFIG_SPL_TARGET),)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900754ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000755endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900756ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
Simon Glass08aeb8b2015-08-04 12:33:43 -0600757ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
Simon Glass476476e2015-08-04 12:33:52 -0600758ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
wdenk7ebf7442002-11-02 23:17:16 +0000759
Simon Glasseea0f112015-01-27 22:13:32 -0700760ifneq ($(BUILD_ROM),)
761ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
762endif
Simon Glassfce7b272014-11-12 22:42:08 -0700763
Allen Martin12b7b702012-08-31 08:30:12 +0000764# enable combined SPL/u-boot/dtb rules for tegra
Simon Glass580cc032016-01-31 18:10:49 -0700765ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
Simon Glassa9d78262016-01-31 18:10:52 -0700766ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
Simon Glass580cc032016-01-31 18:10:49 -0700767ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
Vidya Sagar7dcd3a22013-10-31 14:51:38 +0530768endif
Allen Martin12b7b702012-08-31 08:30:12 +0000769
Stefan Roeseb2b8a692014-10-22 12:13:24 +0200770# Add optional build target if defined in board/cpu/soc headers
771ifneq ($(CONFIG_BUILD_TARGET),)
772ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
773endif
774
Masahiro Yamadaad0fed42014-02-24 11:12:18 +0900775LDFLAGS_u-boot += $(LDFLAGS_FINAL)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900776ifneq ($(CONFIG_SYS_TEXT_BASE),)
777LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
778endif
Masahiro Yamada71f84ef2013-10-17 17:34:53 +0900779
Simon Glasse020c882015-07-31 09:31:23 -0600780# Normally we fill empty space with 0xff
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900781quiet_cmd_objcopy = OBJCOPY $@
Simon Glasse020c882015-07-31 09:31:23 -0600782cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
783 $(OBJCOPYFLAGS_$(@F)) $< $@
784
785# Provide a version which does not do this, for use by EFI
786quiet_cmd_zobjcopy = OBJCOPY $@
787cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900788
Simon Glass476476e2015-08-04 12:33:52 -0600789quiet_cmd_efipayload = OBJCOPY $@
790cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
791
Marek Vasutb97241b2014-03-14 05:00:14 +0100792quiet_cmd_mkimage = MKIMAGE $@
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900793cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
794 $(if $(KBUILD_VERBOSE:1=), >/dev/null)
795
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +0900796quiet_cmd_cat = CAT $@
797cmd_cat = cat $(filter-out $(PHONY), $^) > $@
798
Masahiro Yamada982a1192014-02-24 11:12:17 +0900799append = cat $(filter-out $< $(PHONY), $^) >> $@
800
801quiet_cmd_pad_cat = CAT $@
802cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
803
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900804all: $(ALL-y)
Simon Glass73845352015-01-12 18:02:08 -0700805ifeq ($(CONFIG_DM_I2C_COMPAT),y)
806 @echo "===================== WARNING ======================"
807 @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
808 @echo "(possibly in a subsequent patch in your series)"
809 @echo "before sending patches to the mailing list."
810 @echo "===================================================="
811endif
wdenk7ebf7442002-11-02 23:17:16 +0000812
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +0900813PHONY += dtbs
Masahiro Yamada4141e852016-06-23 13:53:46 +0900814dtbs: dts/dt.dtb
815 @:
816dts/dt.dtb: checkdtc u-boot
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +0900817 $(Q)$(MAKE) $(build)=dts dtbs
Simon Glass2c0f79e2011-10-24 19:15:31 +0000818
Simon Glassad1ecd22016-01-31 18:10:50 -0700819quiet_cmd_copy = COPY $@
820 cmd_copy = cp $< $@
821
822ifeq ($(CONFIG_OF_SEPARATE),y)
823u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +0900824 $(call if_changed,cat)
Simon Glass2c0f79e2011-10-24 19:15:31 +0000825
Simon Glassad1ecd22016-01-31 18:10:50 -0700826u-boot.bin: u-boot-dtb.bin FORCE
827 $(call if_changed,copy)
828else
829u-boot.bin: u-boot-nodtb.bin FORCE
830 $(call if_changed,copy)
831endif
832
Stefano Babice64348f2014-03-31 09:50:35 +0200833%.imx: %.bin
834 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
835
Masahiro Yamada0d1e8aa2014-02-21 15:34:30 +0900836u-boot.dtb: dts/dt.dtb
837 $(call cmd,copy)
838
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900839OBJCOPYFLAGS_u-boot.hex := -O ihex
wdenk6310eb92005-01-09 21:28:15 +0000840
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900841OBJCOPYFLAGS_u-boot.srec := -O srec
wdenk7ebf7442002-11-02 23:17:16 +0000842
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900843u-boot.hex u-boot.srec: u-boot FORCE
844 $(call if_changed,objcopy)
845
Simon Glassad1ecd22016-01-31 18:10:50 -0700846OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
Simon Glassfce7b272014-11-12 22:42:08 -0700847 $(if $(CONFIG_X86_RESET_VECTOR),-R .start16 -R .resetvec)
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900848
Simon Glassad1ecd22016-01-31 18:10:50 -0700849binary_size_check: u-boot-nodtb.bin FORCE
850 @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
Chris Packham3ce7a4f2014-07-24 17:27:07 +1200851 map_size=$(shell cat u-boot.map | \
Simon Glass0b308f12014-06-18 00:10:15 -0600852 awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
Chris Packham3ce7a4f2014-07-24 17:27:07 +1200853 | sed 's/0X//g' \
Simon Glass0b308f12014-06-18 00:10:15 -0600854 | bc); \
Simon Glass89742922014-06-02 22:04:47 -0600855 if [ "" != "$$map_size" ]; then \
856 if test $$map_size -ne $$file_size; then \
Chris Packham3ce7a4f2014-07-24 17:27:07 +1200857 echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
Simon Glassad1ecd22016-01-31 18:10:50 -0700858 echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
Simon Glass89742922014-06-02 22:04:47 -0600859 exit 1; \
860 fi \
861 fi
862
Simon Glassad1ecd22016-01-31 18:10:50 -0700863u-boot-nodtb.bin: u-boot FORCE
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900864 $(call if_changed,objcopy)
865 $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
866 $(BOARD_SIZE_CHECK)
wdenk7ebf7442002-11-02 23:17:16 +0000867
Masahiro Yamada9e414032014-02-04 17:24:24 +0900868u-boot.ldr: u-boot
Mike Frysinger76d82182009-07-21 22:17:36 -0400869 $(CREATE_LDR_ENV)
Sonic Zhang240182d2014-08-12 18:45:26 +0800870 $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400871 $(BOARD_SIZE_CHECK)
Mike Frysinger94a91e22008-02-04 19:26:57 -0500872
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900873OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
Mike Frysinger94a91e22008-02-04 19:26:57 -0500874
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900875OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
876
877u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
878 $(call if_changed,objcopy)
Mike Frysinger94a91e22008-02-04 19:26:57 -0500879
Stefan Roeseb40bda62012-08-16 17:54:52 +0200880#
881# U-Boot entry point, needed for booting of full-blown U-Boot
882# from the SPL U-Boot version.
883#
884ifndef CONFIG_SYS_UBOOT_START
885CONFIG_SYS_UBOOT_START := 0
886endif
887
Simon Glass741e58e2015-02-05 22:06:10 -0700888# Create a file containing the configuration options the image was built with
889quiet_cmd_cpp_cfg = CFG $@
890cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
Masahiro Yamada31134712015-05-26 12:51:25 +0900891 -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<
Simon Glass741e58e2015-02-05 22:06:10 -0700892
Simon Glasscdf17242016-02-22 22:55:57 -0700893ifdef CONFIG_SPL_LOAD_FIT
894MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
895 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
896 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
Andreas Bießmann7a439ca2016-05-01 03:01:27 +0200897 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
Simon Glasscdf17242016-02-22 22:55:57 -0700898else
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900899MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
900 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
901 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
Simon Glasscdf17242016-02-22 22:55:57 -0700902endif
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900903
Simon Glassdae6e7b2016-01-31 18:10:54 -0700904MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
905
Masahiro Yamada4ab3fc52014-03-11 11:05:17 +0900906MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
907 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900908
Stefan Roesea90ffb52015-01-19 11:33:45 +0100909MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
Stefan Roese944c7a32015-08-25 13:49:41 +0200910 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
Stefan Roesea90ffb52015-01-19 11:33:45 +0100911
Masahiro Yamadae4536f82014-03-11 11:05:16 +0900912MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
913 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900914
Simon Glasscdf17242016-02-22 22:55:57 -0700915u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl: \
916 $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900917 $(call if_changed,mkimage)
wdenkbdccc4f2003-08-05 17:43:17 +0000918
Simon Glass73c5c392016-01-31 18:10:55 -0700919u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
Stefan Roesea90ffb52015-01-19 11:33:45 +0100920 $(call if_changed,mkimage)
921
Masahiro Yamada9e414032014-02-04 17:24:24 +0900922u-boot.sha1: u-boot.bin
923 tools/ubsha1 u-boot.bin
Heiko Schocher566a4942007-06-22 19:11:54 +0200924
Masahiro Yamada9e414032014-02-04 17:24:24 +0900925u-boot.dis: u-boot
wdenk7ebf7442002-11-02 23:17:16 +0000926 $(OBJDUMP) -d $< > $@
927
Masahiro Yamada514ec432016-02-05 17:55:13 +0900928u-boot.cfg: include/config.h FORCE
Simon Glass741e58e2015-02-05 22:06:10 -0700929 $(call if_changed,cpp_cfg)
930
Ying Zhang3aa29de2013-08-16 15:16:15 +0800931ifdef CONFIG_TPL
Masahiro Yamada9e414032014-02-04 17:24:24 +0900932SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
Ying Zhang3aa29de2013-08-16 15:16:15 +0800933else
Masahiro Yamada9e414032014-02-04 17:24:24 +0900934SPL_PAYLOAD := u-boot.bin
Ying Zhang3aa29de2013-08-16 15:16:15 +0800935endif
Scott Wood74752ba2012-12-06 13:33:16 +0000936
Masahiro Yamada982a1192014-02-24 11:12:17 +0900937OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
938 --pad-to=$(CONFIG_SPL_PAD_TO)
939u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
940 $(call if_changed,pad_cat)
Ying Zhang3aa29de2013-08-16 15:16:15 +0800941
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +0200942MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
943
944lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
945 $(call if_changed,mkimage)
946
947OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
948
Masahiro Yamada514ec432016-02-05 17:55:13 +0900949lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +0200950 $(call if_changed,objcopy)
951
952OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
953
Masahiro Yamada514ec432016-02-05 17:55:13 +0900954lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +0200955 $(call if_changed,objcopy)
956
Masahiro Yamada514ec432016-02-05 17:55:13 +0900957lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
Albert ARIBAUD \(3ADEV\)412ae532015-03-31 11:40:51 +0200958 $(call if_changed,cat)
959
960CLEAN_FILES += lpc32xx-*
961
Masahiro Yamada982a1192014-02-24 11:12:17 +0900962OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
963 --pad-to=$(CONFIG_TPL_PAD_TO)
964tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
965 $(call if_changed,pad_cat)
Heiko Schocher7816f2c2011-07-16 00:06:42 +0000966
Masahiro Yamada630d2342014-02-24 11:12:21 +0900967SPL: spl/u-boot-spl.bin FORCE
968 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
969
970u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
Masahiro Yamada4e0c8ab2014-02-24 11:12:20 +0900971 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
Benoît Thébaudeau7d5a5c72013-04-11 09:35:57 +0000972
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900973MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
974
975u-boot.ubl: u-boot-with-spl.bin FORCE
976 $(call if_changed,mkimage)
José Miguel Gonçalves277f00f2012-09-19 01:25:26 +0000977
Masahiro Yamada982a1192014-02-24 11:12:17 +0900978MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
979 $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
980 -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
981spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
982 $(call if_changed,mkimage)
Christian Rieschd36d8852011-12-09 09:47:39 +0000983
Christian Riesch532d5312014-05-07 10:16:28 +0200984OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
Masahiro Yamada982a1192014-02-24 11:12:17 +0900985u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
986 $(call if_changed,pad_cat)
Otavio Salvadora5453552012-08-18 07:25:25 +0000987
Marek Vasut1a9df132014-04-03 19:12:21 +0200988u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
989 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
Masahiro Yamada03c7b3f2014-02-24 11:12:13 +0900990u-boot.sb: u-boot.bin spl/u-boot-spl.bin
Masahiro Yamada07e27ce2014-03-11 11:05:11 +0900991 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
Marek Vasut30b9b932011-11-08 23:18:19 +0000992
Stefan Roese94aebe62012-01-05 11:19:50 +0100993# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
994# Both images are created using mkimage (crc etc), so that the ROM
995# bootloader can check its integrity. Padding needs to be done to the
996# SPL image (with mkimage header) and not the binary. Otherwise the resulting image
997# which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
998# The resulting image containing both U-Boot images is called u-boot.spr
Masahiro Yamada982a1192014-02-24 11:12:17 +0900999MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
1000 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
1001spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
1002 $(call if_changed,mkimage)
1003
1004OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1005 --gap-fill=0xff
1006u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
1007 $(call if_changed,pad_cat)
Stefan Roese94aebe62012-01-05 11:19:50 +01001008
Marek Vasut333b7202015-07-15 02:53:45 +02001009ifneq ($(CONFIG_ARCH_SOCFPGA),)
1010quiet_cmd_socboot = SOCBOOT $@
Simon Glassbd7dc382016-01-31 18:10:53 -07001011cmd_socboot = cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
1012 spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
1013 u-boot.img > $@ || rm -f $@
1014u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE
Marek Vasut333b7202015-07-15 02:53:45 +02001015 $(call if_changed,socboot)
1016endif
1017
Simon Glassfce7b272014-11-12 22:42:08 -07001018# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
1019# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
1020# the middle.
1021ifneq ($(CONFIG_X86_RESET_VECTOR),)
1022rom: u-boot.rom FORCE
1023
Bin Mengc7016232014-12-12 21:05:21 +08001024IFDTOOL=$(objtree)/tools/ifdtool
Simon Glass0f61de82014-12-17 15:50:37 +08001025IFDTOOL_FLAGS = -f 0:$(objtree)/u-boot.dtb
1026IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
Simon Glassad1ecd22016-01-31 18:10:50 -07001027IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-nodtb.bin
Bin Mengc7016232014-12-12 21:05:21 +08001028IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
Simon Glassb0980322015-08-15 14:37:53 -06001029IFDTOOL_FLAGS += -C
Bin Mengc7016232014-12-12 21:05:21 +08001030
1031ifneq ($(CONFIG_HAVE_INTEL_ME),)
1032IFDTOOL_ME_FLAGS = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
1033IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin
1034endif
1035
1036ifneq ($(CONFIG_HAVE_MRC),)
Bin Meng8c5224c2014-12-17 15:50:42 +08001037IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin
Bin Mengc7016232014-12-12 21:05:21 +08001038endif
1039
Bin Meng63faf252014-12-17 15:50:43 +08001040ifneq ($(CONFIG_HAVE_FSP),)
1041IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE)
1042endif
1043
1044ifneq ($(CONFIG_HAVE_CMC),)
1045IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
1046endif
1047
Bin Meng786a08e2015-07-06 16:31:33 +08001048ifneq ($(CONFIG_HAVE_VGA_BIOS),)
1049IFDTOOL_FLAGS += -w $(CONFIG_VGA_BIOS_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_VGA_BIOS_FILE)
Bin Mengc7016232014-12-12 21:05:21 +08001050endif
1051
Simon Glass0adf8d32016-03-11 22:07:16 -07001052ifneq ($(CONFIG_HAVE_REFCODE),)
1053IFDTOOL_FLAGS += -w $(CONFIG_X86_REFCODE_ADDR):refcode.bin
1054endif
1055
Bin Mengc7016232014-12-12 21:05:21 +08001056quiet_cmd_ifdtool = IFDTOOL $@
1057cmd_ifdtool = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp;
1058ifneq ($(CONFIG_HAVE_INTEL_ME),)
1059cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp;
1060endif
1061cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
1062cmd_ifdtool += mv u-boot.tmp $@
1063
Simon Glass0adf8d32016-03-11 22:07:16 -07001064refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
1065 $(call if_changed,copy)
1066
1067quiet_cmd_ldr = LD $@
1068cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
1069 $(filter-out FORCE,$^) -o $@
1070
1071u-boot.rom: u-boot-x86-16bit.bin u-boot.bin FORCE \
1072 $(if $(CONFIG_HAVE_REFCODE),refcode.bin)
Bin Mengc7016232014-12-12 21:05:21 +08001073 $(call if_changed,ifdtool)
Simon Glassfce7b272014-11-12 22:42:08 -07001074
1075OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
1076u-boot-x86-16bit.bin: u-boot FORCE
1077 $(call if_changed,objcopy)
1078endif
1079
Ian Campbell50827a52014-05-05 11:52:30 +01001080ifneq ($(CONFIG_SUNXI),)
1081OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
1082 --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
Simon Glass73c5c392016-01-31 18:10:55 -07001083u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
Ian Campbell50827a52014-05-05 11:52:30 +01001084 $(call if_changed,pad_cat)
1085endif
1086
Tom Warren6d6c0ba2012-12-11 13:34:17 +00001087ifneq ($(CONFIG_TEGRA),)
Masahiro Yamada982a1192014-02-24 11:12:17 +09001088OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
Simon Glassad1ecd22016-01-31 18:10:50 -07001089u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE
Masahiro Yamada982a1192014-02-24 11:12:17 +09001090 $(call if_changed,pad_cat)
Stephen Warren9972db52013-05-14 08:00:53 +00001091
Simon Glassa9d78262016-01-31 18:10:52 -07001092OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
Simon Glass73c5c392016-01-31 18:10:55 -07001093u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
Simon Glass580cc032016-01-31 18:10:49 -07001094 $(call if_changed,pad_cat)
Simon Glassa9d78262016-01-31 18:10:52 -07001095
1096u-boot-dtb-tegra.bin: u-boot-tegra.bin FORCE
1097 $(call if_changed,copy)
Allen Martin984df4e2012-08-31 08:30:10 +00001098endif
1099
Simon Glass08aeb8b2015-08-04 12:33:43 -06001100OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
1101u-boot-app.efi: u-boot FORCE
1102 $(call if_changed,zobjcopy)
1103
Simon Glass73c5c392016-01-31 18:10:55 -07001104u-boot.bin.o: u-boot.bin FORCE
Simon Glass476476e2015-08-04 12:33:52 -06001105 $(call if_changed,efipayload)
1106
1107u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
1108 $(call if_changed_dep,cpp_lds)
1109
1110# Rule to link the EFI payload which contains a stub and a U-Boot binary
1111quiet_cmd_u-boot_payload ?= LD $@
1112 cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
Simon Glass96a8d402015-08-04 12:33:56 -06001113 -T u-boot-payload.lds arch/x86/cpu/call32.o \
Simon Glass73c5c392016-01-31 18:10:55 -07001114 lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
Simon Glass476476e2015-08-04 12:33:52 -06001115 $(addprefix arch/$(ARCH)/lib/efi/,$(EFISTUB))
1116
Simon Glass73c5c392016-01-31 18:10:55 -07001117u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
Simon Glass476476e2015-08-04 12:33:52 -06001118 $(call if_changed,u-boot_payload)
1119
1120OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
1121u-boot-payload.efi: u-boot-payload FORCE
1122 $(call if_changed,zobjcopy)
1123
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +09001124u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
1125 $(call if_changed,cat)
Stefan Roesefb3d2b82012-08-24 17:36:53 +02001126
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301127#Add a target to create boot binary having SPL binary in PBI format
1128#concatenated with u-boot binary. It is need by PowerPC SoC having
1129#internal SRAM <= 512KB.
1130MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
Alison Wang94cb17d2014-12-03 15:00:41 +08001131 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
1132 -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301133
1134spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
1135 $(call if_changed,mkimage)
1136
Alison Wang45c2e482014-12-03 15:00:42 +08001137ifeq ($(ARCH),arm)
1138UBOOT_BINLOAD := u-boot.img
1139else
1140UBOOT_BINLOAD := u-boot.bin
1141endif
1142
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301143OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1144 --gap-fill=0xff
1145
Alison Wang45c2e482014-12-03 15:00:42 +08001146u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +05301147 $(call if_changed,pad_cat)
1148
Stefan Roeseecddccd2013-02-22 11:36:50 +01001149# PPC4xx needs the SPL at the end of the image, since the reset vector
1150# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
1151# and need to introduce a new build target with the full blown U-Boot
1152# at the start padded up to the start of the SPL image. And then concat
1153# the SPL image to the end.
Masahiro Yamada982a1192014-02-24 11:12:17 +09001154
1155OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
1156 --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
1157u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
1158 $(call if_changed,pad_cat)
Stefan Roeseecddccd2013-02-22 11:36:50 +01001159
Scott Woodf4dc7142013-12-14 11:47:33 +08001160# Create a new ELF from a raw binary file. This is useful for arm64
1161# where static relocation needs to be performed on the raw binary,
1162# but certain simulators only accept an ELF file (but don't do the
1163# relocation).
1164# FIXME refactor dts/Makefile to share target/arch detection
Masahiro Yamada9e414032014-02-04 17:24:24 +09001165u-boot.elf: u-boot.bin
Scott Woodf4dc7142013-12-14 11:47:33 +08001166 @$(OBJCOPY) -B aarch64 -I binary -O elf64-littleaarch64 \
Masahiro Yamada9e414032014-02-04 17:24:24 +09001167 $< u-boot-elf.o
1168 @$(LD) u-boot-elf.o -o $@ \
Scott Woodf4dc7142013-12-14 11:47:33 +08001169 --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \
1170 -Ttext=$(CONFIG_SYS_TEXT_BASE)
1171
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001172# Rule to link u-boot
1173# May be overridden by arch/$(ARCH)/config.mk
1174quiet_cmd_u-boot__ ?= LD $@
1175 cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
1176 -T u-boot.lds $(u-boot-init) \
1177 --start-group $(u-boot-main) --end-group \
1178 $(PLATFORM_LIBS) -Map u-boot.map
Simon Glass86eb49b2011-10-03 19:26:50 +00001179
Vasili Galkacac8f382014-08-14 12:40:55 +03001180quiet_cmd_smap = GEN common/system_map.o
1181cmd_smap = \
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001182 smap=`$(call SYSTEM_MAP,u-boot) | \
1183 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
1184 $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
1185 -c $(srctree)/common/system_map.c -o common/system_map.o
Vasili Galkacac8f382014-08-14 12:40:55 +03001186
Masahiro Yamada514ec432016-02-05 17:55:13 +09001187u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds FORCE
Vasili Galkacac8f382014-08-14 12:40:55 +03001188 $(call if_changed,u-boot__)
1189ifeq ($(CONFIG_KALLSYMS),y)
1190 $(call cmd,smap)
Masahiro Yamadaad0fed42014-02-24 11:12:18 +09001191 $(call cmd,u-boot__) common/system_map.o
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001192endif
wdenk7ebf7442002-11-02 23:17:16 +00001193
Stephen Warren7ed48482016-02-08 14:44:15 -07001194quiet_cmd_sym ?= SYM $@
1195 cmd_sym ?= $(OBJDUMP) -t $< > $@
1196u-boot.sym: u-boot FORCE
1197 $(call if_changed,sym)
1198
Michal Simek69c0d322014-04-24 15:24:28 +02001199# The actual objects are generated when descending,
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001200# make sure no implicit rule kicks in
1201$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
Marian Balakowiczf9328632006-09-01 19:49:50 +02001202
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001203# Handle descending into subdirectories listed in $(vmlinux-dirs)
1204# Preset locale variables to speed up the build process. Limit locale
1205# tweaks to this spot to avoid wrong language settings when running
1206# make menuconfig etc.
1207# Error messages still appears in the original language
wdenka8c7c702003-12-06 19:49:23 +00001208
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001209PHONY += $(u-boot-dirs)
Masahiro Yamada63780082014-02-24 11:12:10 +09001210$(u-boot-dirs): prepare scripts
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001211 $(Q)$(MAKE) $(build)=$@
Masahiro Yamada940db162014-02-04 17:24:10 +09001212
Masahiro Yamada74241452014-02-24 11:12:09 +09001213tools: prepare
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001214# The "tools" are needed early
1215$(filter-out tools, $(u-boot-dirs)): tools
1216# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1217# is "yes"), so compile examples after U-Boot is compiled.
1218examples: $(filter-out examples, $(u-boot-dirs))
1219
Masahiro Yamada74241452014-02-24 11:12:09 +09001220define filechk_uboot.release
1221 echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1222endef
1223
1224# Store (new) UBOOTRELEASE string in include/config/uboot.release
Masahiro Yamada51148792014-07-30 14:08:17 +09001225include/config/uboot.release: include/config/auto.conf FORCE
Masahiro Yamada74241452014-02-24 11:12:09 +09001226 $(call filechk,uboot.release)
1227
1228
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001229# Things we need to do before we recursively start building the kernel
1230# or the modules are listed in "prepare".
1231# A multi level approach is used. prepareN is processed before prepareN-1.
1232# archprepare is used in arch Makefiles and when processed asm symlink,
1233# version.h and scripts_basic is processed / created.
1234
1235# Listed in dependency order
1236PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
1237
1238# prepare3 is used to check if we are building in a separate output directory,
1239# and if so do:
1240# 1) Check that make has not been executed in the kernel src $(srctree)
Masahiro Yamada74241452014-02-24 11:12:09 +09001241prepare3: include/config/uboot.release
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001242ifneq ($(KBUILD_SRC),)
Masahiro Yamada51148792014-07-30 14:08:17 +09001243 @$(kecho) ' Using $(srctree) as source for U-Boot'
1244 $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001245 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
1246 echo >&2 " in the '$(srctree)' directory.";\
1247 /bin/false; \
1248 fi;
1249endif
1250
1251# prepare2 creates a makefile if using a separate output directory
1252prepare2: prepare3 outputmakefile
1253
Masahiro Yamada51148792014-07-30 14:08:17 +09001254prepare1: prepare2 $(version_h) $(timestamp_h) \
1255 include/config/auto.conf
Masahiro Yamada4a377552014-02-25 19:26:48 +09001256ifeq ($(wildcard $(LDSCRIPT)),)
1257 @echo >&2 " Could not find linker script."
1258 @/bin/false
1259endif
wdenk7ebf7442002-11-02 23:17:16 +00001260
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001261archprepare: prepare1 scripts_basic
wdenka8c7c702003-12-06 19:49:23 +00001262
Masahiro Yamada6a44d802014-02-24 11:12:11 +09001263prepare0: archprepare FORCE
1264 $(Q)$(MAKE) $(build)=.
wdenk7ebf7442002-11-02 23:17:16 +00001265
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001266# All the preparing..
1267prepare: prepare0
Che-liang Chiou349e83f2011-10-17 21:04:15 +00001268
Masahiro Yamada74241452014-02-24 11:12:09 +09001269# Generate some files
1270# ---------------------------------------------------------------------------
1271
1272define filechk_version.h
1273 (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1274 echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
Vagrant Cascadian42ffa512016-06-12 06:07:07 -07001275 echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
1276 echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
Masahiro Yamada74241452014-02-24 11:12:09 +09001277endef
1278
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02001279# The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
1280# The BSD date on the other hand behaves different and would produce errors
1281# with the misused '-d' switch. Respect that and search a working date with
1282# well known pre- and suffixes for the GNU variant of date.
Masahiro Yamada74241452014-02-24 11:12:09 +09001283define filechk_timestamp.h
Chris Packham70d39f52015-08-13 18:08:27 +12001284 (if test -n "$${SOURCE_DATE_EPOCH}"; then \
1285 SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02001286 DATE=""; \
1287 for date in gdate date.gnu date; do \
1288 $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
1289 done; \
1290 if test -n "$${DATE}"; then \
1291 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
1292 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
1293 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
Bin Menga34b4672015-10-12 05:23:40 -07001294 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
Andreas Bießmann2d9efa12015-08-28 10:29:55 +02001295 else \
1296 return 42; \
1297 fi; \
Chris Packham70d39f52015-08-13 18:08:27 +12001298 else \
1299 LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
1300 LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
1301 LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
Bin Menga34b4672015-10-12 05:23:40 -07001302 LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
Chris Packham70d39f52015-08-13 18:08:27 +12001303 fi)
Masahiro Yamada74241452014-02-24 11:12:09 +09001304endef
1305
Masahiro Yamada2e6b2f62014-03-10 10:42:27 +09001306$(version_h): include/config/uboot.release FORCE
Masahiro Yamada74241452014-02-24 11:12:09 +09001307 $(call filechk,version.h)
1308
1309$(timestamp_h): $(srctree)/Makefile FORCE
1310 $(call filechk,timestamp.h)
1311
Masahiro Yamada63780082014-02-24 11:12:10 +09001312# ---------------------------------------------------------------------------
Masahiro Yamada04a34c92014-02-24 11:12:19 +09001313quiet_cmd_cpp_lds = LDS $@
Masahiro Yamada395e60c2014-04-09 20:10:43 +09001314cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
1315 -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
Masahiro Yamada63780082014-02-24 11:12:10 +09001316
Masahiro Yamada04a34c92014-02-24 11:12:19 +09001317u-boot.lds: $(LDSCRIPT) prepare FORCE
Masahiro Yamada395e60c2014-04-09 20:10:43 +09001318 $(call if_changed_dep,cpp_lds)
Wolfgang Denk1aada9c2009-08-17 14:00:53 +02001319
Masahiro Yamada982a1192014-02-24 11:12:17 +09001320spl/u-boot-spl.bin: spl/u-boot-spl
1321 @:
Simon Glassfa78e0a2015-06-23 15:38:29 -06001322spl/u-boot-spl: tools prepare $(if $(CONFIG_OF_SEPARATE),dts/dt.dtb)
Masahiro Yamadac7163082014-06-09 15:14:11 +09001323 $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
Daniel Schwierzeck5df2ee22011-07-13 05:11:04 +00001324
Ian Campbell50827a52014-05-05 11:52:30 +01001325spl/sunxi-spl.bin: spl/u-boot-spl
1326 @:
1327
Simon Glassbd7dc382016-01-31 18:10:53 -07001328spl/u-boot-spl.sfp: spl/u-boot-spl
Marek Vasut333b7202015-07-15 02:53:45 +02001329 @:
1330
Nathan Rossi08598d62015-11-17 22:56:57 +10001331spl/boot.bin: spl/u-boot-spl
1332 @:
1333
Masahiro Yamada63780082014-02-24 11:12:10 +09001334tpl/u-boot-tpl.bin: tools prepare
Masahiro Yamada51148792014-07-30 14:08:17 +09001335 $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
Ying Zhang3aa29de2013-08-16 15:16:15 +08001336
Igor Grinberg8d819ab2014-07-15 15:52:00 +03001337TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
Jean-Christophe PLAGNIOL-VILLARDa340c322007-11-25 18:45:47 +01001338
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00001339FIND := find
1340FINDFLAGS := -L
1341
Marian Balakowiczf9328632006-09-01 19:49:50 +02001342tags ctags:
Masahiro Yamada9e414032014-02-04 17:24:24 +09001343 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08001344 -name '*.[chS]' -print`
Du Huanpeng74d339b2015-05-04 06:26:53 -07001345 ln -s ctags tags
wdenk7ebf7442002-11-02 23:17:16 +00001346
1347etags:
Igor Grinberg8d819ab2014-07-15 15:52:00 +03001348 etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08001349 -name '*.[chS]' -print`
Li Yangffda5862008-02-29 11:46:05 +08001350cscope:
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00001351 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
1352 cscope.files
Li Yangffda5862008-02-29 11:46:05 +08001353 cscope -b -q -k
wdenk7ebf7442002-11-02 23:17:16 +00001354
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001355SYSTEM_MAP = \
1356 $(NM) $1 | \
wdenk7ebf7442002-11-02 23:17:16 +00001357 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001358 LC_ALL=C sort
Masahiro Yamada9e414032014-02-04 17:24:24 +09001359System.map: u-boot
Masahiro Yamadabc8bb6e2013-11-11 14:36:01 +09001360 @$(call SYSTEM_MAP,$<) > $@
wdenk7ebf7442002-11-02 23:17:16 +00001361
Stephen Warren501ebdf2013-07-24 10:09:16 -07001362checkdtc:
1363 @if test $(call dtc-version) -lt 0104; then \
1364 echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
1365 false; \
1366 fi
1367
wdenk7ebf7442002-11-02 23:17:16 +00001368#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +00001369
Scott Wood54799e42013-12-14 11:47:34 +08001370# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1371# R_AARCH64_RELATIVE (64-bit).
Masahiro Yamada9e414032014-02-04 17:24:24 +09001372checkarmreloc: u-boot
Scott Wood54799e42013-12-14 11:47:34 +08001373 @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1374 grep R_A | sort -u`"; \
1375 if test "$$RELOC" != "R_ARM_RELATIVE" -a \
1376 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1377 echo "$< contains unexpected relocations: $$RELOC"; \
1378 false; \
1379 fi
Albert ARIBAUDc37980c2013-06-11 14:17:30 +02001380
Masahiro Yamada74241452014-02-24 11:12:09 +09001381env: scripts_basic
Masahiro Yamada3f76e982014-02-04 17:24:38 +09001382 $(Q)$(MAKE) $(build)=tools/$@
Mike Frysinger0358df42010-08-15 00:03:21 -04001383
Masahiro Yamada4642e002014-03-31 17:33:51 +09001384tools-only: scripts_basic $(version_h) $(timestamp_h)
1385 $(Q)$(MAKE) $(build)=tools
1386
Masahiro Yamada1ec8b4e2014-03-03 11:06:18 +09001387tools-all: export HOST_TOOLS_ALL=y
Masahiro Yamada2887c472014-02-04 17:24:39 +09001388tools-all: env tools ;
Mike Frysinger0358df42010-08-15 00:03:21 -04001389
Masahiro Yamadadb5b3392014-03-03 11:06:19 +09001390cross_tools: export CROSS_BUILD_TOOLS=y
1391cross_tools: tools ;
1392
Wolfgang Denk4e53a252006-10-25 00:43:17 +02001393.PHONY : CHANGELOG
1394CHANGELOG:
Ben Warrenb985b5d2006-10-26 14:38:25 -04001395 git log --no-merges U-Boot-1_1_5.. | \
1396 unexpand -a | sed -e 's/\s\s*$$//' > $@
Wolfgang Denk4e53a252006-10-25 00:43:17 +02001397
wdenk7ebf7442002-11-02 23:17:16 +00001398#########################################################################
1399
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001400###
1401# Cleaning is done on three levels.
1402# make clean Delete most generated files
1403# Leave enough to build external modules
1404# make mrproper Delete the current configuration, and all generated files
1405# make distclean Remove editor backup files, patch leftover files and the like
wdenk7ebf7442002-11-02 23:17:16 +00001406
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001407# Directories & files removed with 'make clean'
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09001408CLEAN_DIRS += $(MODVERDIR) \
1409 $(foreach d, spl tpl, $(patsubst %,$d/%, \
Masahiro Yamada51148792014-07-30 14:08:17 +09001410 $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09001411
Tom Rini8a7367a2016-03-15 12:49:12 -04001412CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h include/license.h \
Bo Shen2a507122015-01-15 10:03:53 +08001413 boot* u-boot* MLO* SPL System.map
Mike Frysinger9f4a4202009-10-01 12:11:54 -04001414
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001415# Directories & files removed with 'make mrproper'
Masahiro Yamada51148792014-07-30 14:08:17 +09001416MRPROPER_DIRS += include/config include/generated spl tpl \
Masahiro Yamada45f0ad92014-06-16 18:56:38 +09001417 .tmp_objdiff
Masahiro Yamada51148792014-07-30 14:08:17 +09001418MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
1419 ctags etags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
wdenk7ebf7442002-11-02 23:17:16 +00001420
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001421# clean - Delete most, but leave enough to build external modules
1422#
1423clean: rm-dirs := $(CLEAN_DIRS)
1424clean: rm-files := $(CLEAN_FILES)
wdenk7ebf7442002-11-02 23:17:16 +00001425
Masahiro Yamada6bd04bb2014-03-28 14:55:02 +09001426clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
Andy Fleming734329f2011-11-21 13:40:43 +00001427
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001428clean-dirs := $(addprefix _clean_, $(clean-dirs) doc/DocBook)
wdenk7ebf7442002-11-02 23:17:16 +00001429
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001430PHONY += $(clean-dirs) clean archclean
1431$(clean-dirs):
1432 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1433
1434# TODO: Do not use *.cfgtmp
1435clean: $(clean-dirs)
1436 $(call cmd,rmdirs)
1437 $(call cmd,rmfiles)
1438 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1439 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1440 -o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \
1441 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1442 -o -name '*.symtypes' -o -name 'modules.order' \
1443 -o -name modules.builtin -o -name '.tmp_*.o.*' \
Bin Meng0fbdaa02016-05-22 01:45:25 -07001444 -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001445 -o -name '*.gcno' \) -type f -print | xargs rm -f
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001446
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001447# mrproper - Delete all generated files, including .config
1448#
1449mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
1450mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1451mrproper-dirs := $(addprefix _mrproper_,scripts)
1452
1453PHONY += $(mrproper-dirs) mrproper archmrproper
1454$(mrproper-dirs):
1455 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1456
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09001457mrproper: clean $(mrproper-dirs)
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001458 $(call cmd,rmdirs)
1459 $(call cmd,rmfiles)
Masahiro Yamadae9c16a82014-06-24 18:15:45 +09001460 @rm -f arch/*/include/asm/arch
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001461
1462# distclean
1463#
1464PHONY += distclean
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001465
1466distclean: mrproper
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001467 @find $(srctree) $(RCS_FIND_IGNORE) \
1468 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1469 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
Masahiro Yamada598e2d32014-04-15 13:29:00 +09001470 -o -name '.*.rej' -o -name '*%' -o -name 'core' \
1471 -o -name '*.pyc' \) \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001472 -type f -print | xargs rm -f
Roger Meierfd18a892014-08-20 22:10:29 +02001473 @rm -f boards.cfg
wdenk7ebf7442002-11-02 23:17:16 +00001474
1475backup:
Masahiro Yamada4379ac62014-03-11 11:05:19 +09001476 F=`basename $(srctree)` ; cd .. ; \
Ilya Yanokd6b93712010-06-21 18:13:21 +04001477 gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
wdenk7ebf7442002-11-02 23:17:16 +00001478
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001479help:
1480 @echo 'Cleaning targets:'
Masahiro Yamada48aa812d2014-10-30 10:58:32 +09001481 @echo ' clean - Remove most generated files but keep the config'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001482 @echo ' mrproper - Remove all generated files + config + various backup files'
1483 @echo ' distclean - mrproper + remove editor backup and patch files'
1484 @echo ''
Masahiro Yamada51148792014-07-30 14:08:17 +09001485 @echo 'Configuration targets:'
1486 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1487 @echo ''
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001488 @echo 'Other generic targets:'
1489 @echo ' all - Build all necessary images depending on configuration'
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +09001490 @echo '* u-boot - Build the bare u-boot'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001491 @echo ' dir/ - Build all files in dir and below'
1492 @echo ' dir/file.[oisS] - Build specified target only'
1493 @echo ' dir/file.lst - Build specified mixed source/assembly target only'
1494 @echo ' (requires a recent binutils and recent build (System.map))'
Igor Grinberg5fc2f922014-07-15 15:52:02 +03001495 @echo ' tags/ctags - Generate ctags file for editors'
1496 @echo ' etags - Generate etags file for editors'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001497 @echo ' cscope - Generate cscope index'
Masahiro Yamadaffe29eb2014-10-30 11:06:11 +09001498 @echo ' ubootrelease - Output the release version string (use with make -s)'
1499 @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001500 @echo ''
1501 @echo 'Static analysers'
1502 @echo ' checkstack - Generate a list of stack hogs'
1503 @echo ''
1504 @echo 'Documentation targets:'
1505 @$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp
1506 @echo ''
1507 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1508 @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
1509 @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
1510 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
1511 @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
1512 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1513 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
1514 @echo ' 1: warnings which may be relevant and do not occur too often'
1515 @echo ' 2: warnings which occur quite often but may still be relevant'
1516 @echo ' 3: more obscure warnings, can most likely be ignored'
1517 @echo ' Multiple levels can be combined with W=12 or W=123'
1518 @echo ''
1519 @echo 'Execute "make" or "make all" to build all targets marked with [*] '
1520 @echo 'For further info see the ./README file'
1521
Masahiro Yamada8fac9c72014-02-05 10:52:50 +09001522
1523# Documentation targets
1524# ---------------------------------------------------------------------------
1525%docs: scripts_basic FORCE
1526 $(Q)$(MAKE) $(build)=scripts build_docproc
1527 $(Q)$(MAKE) $(build)=doc/DocBook $@
1528
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001529# Dummies...
1530PHONY += prepare scripts
1531prepare: ;
1532scripts: ;
Masahiro Yamada9e414032014-02-04 17:24:24 +09001533
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001534endif #ifeq ($(config-targets),1)
1535endif #ifeq ($(mixed-targets),1)
1536
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001537PHONY += checkstack ubootrelease ubootversion
1538
1539checkstack:
1540 $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
1541 $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
1542
1543ubootrelease:
1544 @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1545
1546ubootversion:
1547 @echo $(UBOOTVERSION)
1548
Masahiro Yamada886d86e2014-02-24 11:12:22 +09001549# Single targets
1550# ---------------------------------------------------------------------------
1551# Single targets are compatible with:
1552# - build with mixed source and output
1553# - build with separate output dir 'make O=...'
1554# - external modules
1555#
1556# target-dir => where to store outputfile
1557# build-dir => directory in kernel source tree to use
1558
1559ifeq ($(KBUILD_EXTMOD),)
1560 build-dir = $(patsubst %/,%,$(dir $@))
1561 target-dir = $(dir $@)
1562else
1563 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1564 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1565 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1566endif
1567
1568%.s: %.c prepare scripts FORCE
1569 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1570%.i: %.c prepare scripts FORCE
1571 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1572%.o: %.c prepare scripts FORCE
1573 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1574%.lst: %.c prepare scripts FORCE
1575 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1576%.s: %.S prepare scripts FORCE
1577 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1578%.o: %.S prepare scripts FORCE
1579 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1580%.symtypes: %.c prepare scripts FORCE
1581 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1582
1583# Modules
1584/: prepare scripts FORCE
1585 $(cmd_crmodverdir)
1586 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1587 $(build)=$(build-dir)
1588%/: prepare scripts FORCE
1589 $(cmd_crmodverdir)
1590 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1591 $(build)=$(build-dir)
1592%.ko: prepare scripts FORCE
1593 $(cmd_crmodverdir)
1594 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1595 $(build)=$(build-dir) $(@:.ko=.o)
1596 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1597
Michal Simek69c0d322014-04-24 15:24:28 +02001598# FIXME Should go into a make.lib or something
Masahiro Yamada886d86e2014-02-24 11:12:22 +09001599# ===========================================================================
1600
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001601quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
1602 cmd_rmdirs = rm -rf $(rm-dirs)
1603
1604quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
1605 cmd_rmfiles = rm -f $(rm-files)
1606
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001607# read all saved command lines
1608
1609targets := $(wildcard $(sort $(targets)))
1610cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1611
1612ifneq ($(cmd_files),)
1613 $(cmd_files): ; # Do not try to update included dependency files
1614 include $(cmd_files)
1615endif
1616
Masahiro Yamada9e414032014-02-04 17:24:24 +09001617endif # skip-makefile
1618
1619PHONY += FORCE
1620FORCE:
1621
1622# Declare the contents of the .PHONY variable as phony. We keep that
1623# information in a variable so we can use it in if_changed and friends.
1624.PHONY: $(PHONY)