blob: 0e5c20097d1cfd0781e68d2883fcac031921664b [file] [log] [blame]
Tim Harvey59189a82014-03-06 07:46:30 -08001/*
2 * Copyright (C) 2013 Gateworks Corporation
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7#ifndef __CONFIG_H
8#define __CONFIG_H
9
Tim Harvey0cc11de2014-06-02 16:13:27 -070010/* SPL */
11#define CONFIG_SPL_NAND_SUPPORT
12#define CONFIG_SPL_MMC_SUPPORT
13#define CONFIG_SPL_FAT_SUPPORT
14/*
15#define CONFIG_SPL_SATA_SUPPORT
16*/
17/* Location in NAND to read U-Boot from */
18#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024)
19
20#include "imx6_spl.h" /* common IMX6 SPL configuration */
Tim Harvey59189a82014-03-06 07:46:30 -080021#include "mx6_common.h"
22#define CONFIG_MX6
23#define CONFIG_DISPLAY_CPUINFO /* display cpu info */
24#define CONFIG_DISPLAY_BOARDINFO_LATE /* display board info (after reloc) */
25
26#define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
27
28#include <asm/arch/imx-regs.h>
29#include <asm/imx-common/gpio.h>
30
31/* ATAGs */
32#define CONFIG_CMDLINE_TAG
33#define CONFIG_SETUP_MEMORY_TAGS
34#define CONFIG_INITRD_TAG
35#define CONFIG_SERIAL_TAG
36#define CONFIG_REVISION_TAG
37
Tim Harveyeffb7dc2014-04-25 15:17:00 -070038#define CONFIG_SYS_GENERIC_BOARD
39
Tim Harvey59189a82014-03-06 07:46:30 -080040/* Size of malloc() pool */
41#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
42
43/* Init Functions */
44#define CONFIG_BOARD_EARLY_INIT_F
45#define CONFIG_MISC_INIT_R
46
47/* GPIO */
48#define CONFIG_MXC_GPIO
49
50/* Serial */
51#define CONFIG_MXC_UART
52#define CONFIG_MXC_UART_BASE UART2_BASE
53
54#ifdef CONFIG_SPI_FLASH
55
56/* SPI */
57#define CONFIG_CMD_SF
58#ifdef CONFIG_CMD_SF
59 #define CONFIG_MXC_SPI
60 #define CONFIG_SPI_FLASH_MTD
61 #define CONFIG_SPI_FLASH_BAR
62 #define CONFIG_SPI_FLASH_WINBOND
63 #define CONFIG_SF_DEFAULT_BUS 0
64 #define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8))
65 /* GPIO 3-19 (21248) */
66 #define CONFIG_SF_DEFAULT_SPEED 30000000
67 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
68#endif
69
70#else
71/* Enable NAND support */
72#define CONFIG_CMD_TIME
73#define CONFIG_CMD_NAND
74#define CONFIG_CMD_NAND_TRIMFFS
75#ifdef CONFIG_CMD_NAND
76 #define CONFIG_NAND_MXS
77 #define CONFIG_SYS_MAX_NAND_DEVICE 1
78 #define CONFIG_SYS_NAND_BASE 0x40000000
79 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
80 #define CONFIG_SYS_NAND_ONFI_DETECTION
81
82 /* DMA stuff, needed for GPMI/MXS NAND support */
83 #define CONFIG_APBH_DMA
84 #define CONFIG_APBH_DMA_BURST
85 #define CONFIG_APBH_DMA_BURST8
86#endif
87
88#endif /* CONFIG_SPI_FLASH */
89
90/* Flattened Image Tree Suport */
91#define CONFIG_FIT
92#define CONFIG_FIT_VERBOSE
93
94/* I2C Configs */
95#define CONFIG_CMD_I2C
96#define CONFIG_SYS_I2C
97#define CONFIG_SYS_I2C_MXC
Tim Harvey9c0fe832014-08-07 22:35:45 -070098#define CONFIG_SYS_I2C_SPEED 100000
99#define CONFIG_I2C_GSC 0
100#define CONFIG_I2C_PMIC 1
Tim Harvey59189a82014-03-06 07:46:30 -0800101
102/* MMC Configs */
103#define CONFIG_FSL_ESDHC
104#define CONFIG_FSL_USDHC
105#define CONFIG_SYS_FSL_ESDHC_ADDR 0
106#define CONFIG_SYS_FSL_USDHC_NUM 1
107#define CONFIG_MMC
108#define CONFIG_CMD_MMC
109#define CONFIG_GENERIC_MMC
110#define CONFIG_BOUNCE_BUFFER
111
112/* Filesystem support */
113#define CONFIG_CMD_EXT2
114#define CONFIG_CMD_FAT
115#define CONFIG_CMD_UBIFS
116#define CONFIG_DOS_PARTITION
117
118/* Network config - Allow larger/faster download for TFTP/NFS */
119#define CONFIG_IP_DEFRAG
120#define CONFIG_TFTP_BLOCKSIZE 4096
121#define CONFIG_NFS_READ_SIZE 4096
122
123/*
124 * SATA Configs
125 */
126#define CONFIG_CMD_SATA
127#ifdef CONFIG_CMD_SATA
128 #define CONFIG_DWC_AHSATA
129 #define CONFIG_SYS_SATA_MAX_DEVICE 1
130 #define CONFIG_DWC_AHSATA_PORT_ID 0
131 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
132 #define CONFIG_LBA48
133 #define CONFIG_LIBATA
134#endif
135
136/*
137 * PCI express
138 */
139#define CONFIG_CMD_PCI
140#ifdef CONFIG_CMD_PCI
141#define CONFIG_PCI
142#define CONFIG_PCI_PNP
143#define CONFIG_PCI_SCAN_SHOW
Tim Harveydad08282014-08-07 22:49:57 -0700144#define CONFIG_PCI_FIXUP_DEV
Tim Harvey59189a82014-03-06 07:46:30 -0800145#define CONFIG_PCIE_IMX
146#endif
147
148/*
149 * PMIC
150 */
151#define CONFIG_POWER
152#define CONFIG_POWER_I2C
153#define CONFIG_POWER_PFUZE100
154#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
Tim Harvey234d89d2014-05-05 08:22:25 -0700155#define CONFIG_POWER_LTC3676
156#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
Tim Harvey59189a82014-03-06 07:46:30 -0800157
158/* Various command support */
159#include <config_cmd_default.h>
160#undef CONFIG_CMD_IMLS
161#define CONFIG_CMD_PING
162#define CONFIG_CMD_DHCP
163#define CONFIG_CMD_MII
164#define CONFIG_CMD_NET
165#define CONFIG_CMD_BMODE /* set eFUSE shadow for a boot dev and reset */
166#define CONFIG_CMD_HDMIDETECT /* detect HDMI output device */
167#define CONFIG_CMD_SETEXPR
168#define CONFIG_CMD_BOOTZ
169#define CONFIG_CMD_GSC
Tim Harvey9c0fe832014-08-07 22:35:45 -0700170#define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */
Tim Harvey59189a82014-03-06 07:46:30 -0800171#define CONFIG_CMD_UBI
172#define CONFIG_RBTREE
173#define CONFIG_LZO
174#define CONFIG_CMD_FUSE /* eFUSE read/write support */
175#ifdef CONFIG_CMD_FUSE
176#define CONFIG_MXC_OCOTP
177#endif
178
179
180/* Ethernet support */
181#define CONFIG_FEC_MXC
182#define CONFIG_MII
183#define IMX_FEC_BASE ENET_BASE_ADDR
184#define CONFIG_FEC_XCV_TYPE RGMII
185#define CONFIG_ETHPRIME "FEC"
186#define CONFIG_FEC_MXC_PHYADDR 0
187#define CONFIG_PHYLIB
188#define CONFIG_ARP_TIMEOUT 200UL
189
190/* USB Configs */
191#define CONFIG_CMD_USB
192#define CONFIG_USB_EHCI
193#define CONFIG_USB_EHCI_MX6
194#define CONFIG_USB_STORAGE
195#define CONFIG_USB_HOST_ETHER
196#define CONFIG_USB_ETHER_ASIX
197#define CONFIG_USB_ETHER_SMSC95XX
198#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
199#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
200#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
201#define CONFIG_MXC_USB_FLAGS 0
202#define CONFIG_USB_KEYBOARD
203#define CONFIG_CI_UDC
204#define CONFIG_USBD_HS
205#define CONFIG_USB_GADGET_DUALSPEED
206#define CONFIG_USB_ETHER
207#define CONFIG_USB_ETH_CDC
208#define CONFIG_NETCONSOLE
209#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
Tim Harvey59189a82014-03-06 07:46:30 -0800210
Tim Harvey7a278f92014-04-25 15:39:07 -0700211/* Framebuffer and LCD */
212#define CONFIG_VIDEO
213#define CONFIG_VIDEO_IPUV3
214#define CONFIG_CFB_CONSOLE
215#define CONFIG_VGA_AS_SINGLE_DEVICE
216#define CONFIG_SYS_CONSOLE_IS_IN_ENV
217#define CONFIG_VIDEO_BMP_RLE8
218#define CONFIG_SPLASH_SCREEN
219#define CONFIG_BMP_16BPP
220#define CONFIG_VIDEO_LOGO
221#define CONFIG_IPUV3_CLK 260000000
222#define CONFIG_CMD_HDMIDETECT
223#define CONFIG_CONSOLE_MUX
224#define CONFIG_IMX_HDMI
225#define CONFIG_IMX_VIDEO_SKIP
226
Tim Harvey59189a82014-03-06 07:46:30 -0800227/* serial console (ttymxc1,115200) */
228#define CONFIG_CONS_INDEX 1
229#define CONFIG_BAUDRATE 115200
230
231/* Miscellaneous configurable options */
232#define CONFIG_SYS_LONGHELP
233#define CONFIG_SYS_HUSH_PARSER
234#define CONFIG_SYS_PROMPT "Ventana > "
235#define CONFIG_SYS_CBSIZE 1024
236#define CONFIG_AUTO_COMPLETE
237#define CONFIG_CMDLINE_EDITING
238#define CONFIG_HWCONFIG
239
240/* Print Buffer Size */
241#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
242#define CONFIG_SYS_MAXARGS 16
243#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
244
245/* Memory configuration */
246#define CONFIG_SYS_MEMTEST_START 0x10000000
247#define CONFIG_SYS_MEMTEST_END 0x10010000
248#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
249#define CONFIG_SYS_TEXT_BASE 0x17800000
250#define CONFIG_SYS_LOAD_ADDR 0x12000000
251
252/* Physical Memory Map */
253#define CONFIG_NR_DRAM_BANKS 1
254#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
255#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
256#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
257#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
258
259#define CONFIG_SYS_INIT_SP_OFFSET \
260 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
261#define CONFIG_SYS_INIT_SP_ADDR \
262 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
263
264/* FLASH and environment organization */
265#define CONFIG_SYS_NO_FLASH /* no NOR flash */
266
267/*
268 * MTD Command for mtdparts
269 */
270#define CONFIG_CMD_MTDPARTS
271#define CONFIG_MTD_DEVICE
272#define CONFIG_MTD_PARTITIONS
273#ifdef CONFIG_SPI_FLASH
274#define MTDIDS_DEFAULT "nor0=nor"
275#define MTDPARTS_DEFAULT \
276 "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
277#else
278#define MTDIDS_DEFAULT "nand0=nand"
279#define MTDPARTS_DEFAULT "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
280#endif
281
282/* Persistent Environment Config */
283#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */
284#ifdef CONFIG_SPI_FLASH
285#define CONFIG_ENV_IS_IN_SPI_FLASH
286#else
287#define CONFIG_ENV_IS_IN_NAND
288#endif
289#if defined(CONFIG_ENV_IS_IN_MMC)
290 #define CONFIG_ENV_OFFSET (6 * 64 * 1024)
291 #define CONFIG_ENV_SIZE (8 * 1024)
292 #define CONFIG_SYS_MMC_ENV_DEV 0
293#elif defined(CONFIG_ENV_IS_IN_NAND)
294 #define CONFIG_ENV_OFFSET (16 << 20)
295 #define CONFIG_ENV_SECT_SIZE (128 << 10)
296 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
297 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
298 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
299#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
300 #define CONFIG_ENV_OFFSET (512 * 1024)
301 #define CONFIG_ENV_SECT_SIZE (64 * 1024)
302 #define CONFIG_ENV_SIZE (8 * 1024)
303 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
304 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
305 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
306 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
307#endif
308
309/* Environment */
310#define CONFIG_BOOTDELAY 3
311#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
312#define CONFIG_IPADDR 192.168.1.1
313#define CONFIG_SERVERIP 192.168.1.146
314#define HWCONFIG_DEFAULT \
315 "hwconfig=rs232;" \
316 "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
317
318#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
319 "console=ttymxc1\0" \
320 "bootdevs=usb mmc sata flash\0" \
321 HWCONFIG_DEFAULT \
322 "video=\0" \
323 \
324 "mtdparts=" MTDPARTS_DEFAULT "\0" \
325 "mtdids=" MTDIDS_DEFAULT "\0" \
326 \
327 "fdt_high=0xffffffff\0" \
328 "fdt_addr=0x18000000\0" \
329 "loadfdt=" \
330 "if ${fsload} ${fdt_addr} boot/${fdt_file}; then " \
331 "echo Loaded DTB from boot/${fdt_file}; " \
332 "elif ${fsload} ${fdt_addr} boot/${fdt_file1}; then " \
333 "echo Loaded DTB from boot/${fdt_file1}; " \
334 "elif ${fsload} ${fdt_addr} boot/${fdt_file2}; then " \
335 "echo Loaded DTB from boot/${fdt_file2}; " \
336 "fi\0" \
337 \
338 "script=boot/6x_bootscript-ventana\0" \
339 "loadscript=" \
340 "if ${fsload} ${loadaddr} ${script}; then " \
341 "source; " \
342 "fi\0" \
343 \
344 "uimage=boot/uImage\0" \
345 "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
346 "mmc_boot=" \
347 "setenv fsload 'ext2load mmc 0:1'; " \
348 "mmc dev 0 && mmc rescan && " \
349 "run loadscript; " \
350 "if ${fsload} ${loadaddr} ${uimage}; then " \
351 "setenv bootargs console=${console},${baudrate} " \
352 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
353 "rootwait rw ${video} ${extra}; " \
354 "if run loadfdt && fdt addr ${fdt_addr}; then " \
355 "bootm ${loadaddr} - ${fdt_addr}; " \
356 "else " \
357 "bootm; " \
358 "fi; " \
359 "fi\0" \
360 \
361 "sata_boot=" \
362 "setenv fsload 'ext2load sata 0:1'; sata init && " \
363 "run loadscript; " \
364 "if ${fsload} ${loadaddr} ${uimage}; then " \
365 "setenv bootargs console=${console},${baudrate} " \
366 "root=/dev/sda1 rootfstype=ext4 " \
367 "rootwait rw ${video} ${extra}; " \
368 "if run loadfdt && fdt addr ${fdt_addr}; then " \
369 "bootm ${loadaddr} - ${fdt_addr}; " \
370 "else " \
371 "bootm; " \
372 "fi; " \
373 "fi\0" \
374 "usb_boot=" \
375 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
376 "run loadscript; " \
377 "if ${fsload} ${loadaddr} ${uimage}; then " \
378 "setenv bootargs console=${console},${baudrate} " \
379 "root=/dev/sda1 rootfstype=ext4 " \
380 "rootwait rw ${video} ${extra}; " \
381 "if run loadfdt && fdt addr ${fdt_addr}; then " \
382 "bootm ${loadaddr} - ${fdt_addr}; " \
383 "else " \
384 "bootm; " \
385 "fi; " \
386 "fi\0"
387
388#ifdef CONFIG_SPI_FLASH
389 #define CONFIG_EXTRA_ENV_SETTINGS \
390 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
391 "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
392 "image_uboot=ventana/u-boot_spi.imx\0" \
393 \
394 "spi_koffset=0x90000\0" \
395 "spi_klen=0x200000\0" \
396 \
397 "spi_updateuboot=echo Updating uboot from " \
398 "${serverip}:${image_uboot}...; " \
399 "tftpboot ${loadaddr} ${image_uboot} && " \
400 "sf probe && sf erase 0 80000 && " \
401 "sf write ${loadaddr} 400 ${filesize}\0" \
402 "spi_update=echo Updating OS from ${serverip}:${image_os} " \
403 "to ${spi_koffset} ...; " \
404 "tftp ${loadaddr} ${image_os} && " \
405 "sf probe && " \
406 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
407 \
408 "flash_boot=" \
409 "if sf probe && " \
410 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
411 "setenv bootargs console=${console},${baudrate} " \
412 "root=/dev/mtdblock3 " \
413 "rootfstype=squashfs,jffs2 " \
414 "${video} ${extra}; " \
415 "bootm; " \
416 "fi\0"
417#else
418 #define CONFIG_EXTRA_ENV_SETTINGS \
419 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
420 "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
421 \
422 "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
423 "tftp ${loadaddr} ${image_rootfs} && " \
424 "nand erase.part rootfs && " \
425 "nand write ${loadaddr} rootfs ${filesize}\0" \
426 \
427 "flash_boot=" \
428 "setenv fsload 'ubifsload'; " \
429 "ubi part rootfs && ubifsmount ubi0:rootfs; " \
430 "run loadscript; " \
431 "if ${fsload} ${loadaddr} ${uimage}; then " \
432 "setenv bootargs console=${console},${baudrate} " \
433 "root=ubi0:rootfs ubi.mtd=2 " \
434 "rootfstype=ubifs ${video} ${extra}; " \
435 "if run loadfdt && fdt addr ${fdt_addr}; then " \
436 "ubifsumount; " \
437 "bootm ${loadaddr} - ${fdt_addr}; " \
438 "else " \
439 "ubifsumount; bootm; " \
440 "fi; " \
441 "fi\0"
442#endif
443
444#define CONFIG_BOOTCOMMAND \
445 "for btype in ${bootdevs}; do " \
446 "echo; echo Attempting ${btype} boot...; " \
447 "if run ${btype}_boot; then; fi; " \
448 "done"
449
450/* Device Tree Support */
451#define CONFIG_OF_BOARD_SETUP
452#define CONFIG_OF_LIBFDT
453#define CONFIG_FDT_FIXUP_PARTITIONS
454
455#ifndef CONFIG_SYS_DCACHE_OFF
456 #define CONFIG_CMD_CACHE
457#endif
458
459#endif /* __CONFIG_H */