| |
| /*---------------------------------------------------------------*/ |
| /*--- ---*/ |
| /*--- This file (host-x86/isel.c) is ---*/ |
| /*--- Copyright (C) OpenWorks LLP. All rights reserved. ---*/ |
| /*--- ---*/ |
| /*---------------------------------------------------------------*/ |
| |
| /* |
| This file is part of LibVEX, a library for dynamic binary |
| instrumentation and translation. |
| |
| Copyright (C) 2004-2006 OpenWorks LLP. All rights reserved. |
| |
| This library is made available under a dual licensing scheme. |
| |
| If you link LibVEX against other code all of which is itself |
| licensed under the GNU General Public License, version 2 dated June |
| 1991 ("GPL v2"), then you may use LibVEX under the terms of the GPL |
| v2, as appearing in the file LICENSE.GPL. If the file LICENSE.GPL |
| is missing, you can obtain a copy of the GPL v2 from the Free |
| Software Foundation Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| 02110-1301, USA. |
| |
| For any other uses of LibVEX, you must first obtain a commercial |
| license from OpenWorks LLP. Please contact info@open-works.co.uk |
| for information about commercial licensing. |
| |
| This software is provided by OpenWorks LLP "as is" and any express |
| or implied warranties, including, but not limited to, the implied |
| warranties of merchantability and fitness for a particular purpose |
| are disclaimed. In no event shall OpenWorks LLP be liable for any |
| direct, indirect, incidental, special, exemplary, or consequential |
| damages (including, but not limited to, procurement of substitute |
| goods or services; loss of use, data, or profits; or business |
| interruption) however caused and on any theory of liability, |
| whether in contract, strict liability, or tort (including |
| negligence or otherwise) arising in any way out of the use of this |
| software, even if advised of the possibility of such damage. |
| |
| Neither the names of the U.S. Department of Energy nor the |
| University of California nor the names of its contributors may be |
| used to endorse or promote products derived from this software |
| without prior written permission. |
| */ |
| |
| #include "libvex_basictypes.h" |
| #include "libvex_ir.h" |
| #include "libvex.h" |
| |
| #include "ir/irmatch.h" |
| #include "main/vex_util.h" |
| #include "main/vex_globals.h" |
| #include "host-generic/h_generic_regs.h" |
| #include "host-generic/h_generic_simd64.h" |
| #include "host-x86/hdefs.h" |
| |
| /* TODO 21 Apr 2005: |
| |
| -- (Really an assembler issue) don't emit CMov32 as a cmov |
| insn, since that's expensive on P4 and conditional branch |
| is cheaper if (as we expect) the condition is highly predictable |
| |
| -- preserve xmm registers across function calls (by declaring them |
| as trashed by call insns) |
| |
| -- preserve x87 ST stack discipline across function calls. Sigh. |
| |
| -- Check doHelperCall: if a call is conditional, we cannot safely |
| compute any regparm args directly to registers. Hence, the |
| fast-regparm marshalling should be restricted to unconditional |
| calls only. |
| */ |
| |
| /*---------------------------------------------------------*/ |
| /*--- x87 control word stuff ---*/ |
| /*---------------------------------------------------------*/ |
| |
| /* Vex-generated code expects to run with the FPU set as follows: all |
| exceptions masked, round-to-nearest, precision = 53 bits. This |
| corresponds to a FPU control word value of 0x027F. |
| |
| Similarly the SSE control word (%mxcsr) should be 0x1F80. |
| |
| %fpucw and %mxcsr should have these values on entry to |
| Vex-generated code, and should those values should be |
| unchanged at exit. |
| */ |
| |
| #define DEFAULT_FPUCW 0x027F |
| |
| /* debugging only, do not use */ |
| /* define DEFAULT_FPUCW 0x037F */ |
| |
| |
| /*---------------------------------------------------------*/ |
| /*--- misc helpers ---*/ |
| /*---------------------------------------------------------*/ |
| |
| /* These are duplicated in guest-x86/toIR.c */ |
| static IRExpr* unop ( IROp op, IRExpr* a ) |
| { |
| return IRExpr_Unop(op, a); |
| } |
| |
| static IRExpr* binop ( IROp op, IRExpr* a1, IRExpr* a2 ) |
| { |
| return IRExpr_Binop(op, a1, a2); |
| } |
| |
| static IRExpr* bind ( Int binder ) |
| { |
| return IRExpr_Binder(binder); |
| } |
| |
| |
| |
| /*---------------------------------------------------------*/ |
| /*--- ISelEnv ---*/ |
| /*---------------------------------------------------------*/ |
| |
| /* This carries around: |
| |
| - A mapping from IRTemp to IRType, giving the type of any IRTemp we |
| might encounter. This is computed before insn selection starts, |
| and does not change. |
| |
| - A mapping from IRTemp to HReg. This tells the insn selector |
| which virtual register(s) are associated with each IRTemp |
| temporary. This is computed before insn selection starts, and |
| does not change. We expect this mapping to map precisely the |
| same set of IRTemps as the type mapping does. |
| |
| - vregmap holds the primary register for the IRTemp. |
| - vregmapHI is only used for 64-bit integer-typed |
| IRTemps. It holds the identity of a second |
| 32-bit virtual HReg, which holds the high half |
| of the value. |
| |
| - The code array, that is, the insns selected so far. |
| |
| - A counter, for generating new virtual registers. |
| |
| - The host subarchitecture we are selecting insns for. |
| This is set at the start and does not change. |
| |
| Note, this is all host-independent. */ |
| |
| typedef |
| struct { |
| IRTypeEnv* type_env; |
| |
| HReg* vregmap; |
| HReg* vregmapHI; |
| Int n_vregmap; |
| |
| HInstrArray* code; |
| |
| Int vreg_ctr; |
| |
| UInt hwcaps; |
| } |
| ISelEnv; |
| |
| |
| static HReg lookupIRTemp ( ISelEnv* env, IRTemp tmp ) |
| { |
| vassert(tmp >= 0); |
| vassert(tmp < env->n_vregmap); |
| return env->vregmap[tmp]; |
| } |
| |
| static void lookupIRTemp64 ( HReg* vrHI, HReg* vrLO, ISelEnv* env, IRTemp tmp ) |
| { |
| vassert(tmp >= 0); |
| vassert(tmp < env->n_vregmap); |
| vassert(env->vregmapHI[tmp] != INVALID_HREG); |
| *vrLO = env->vregmap[tmp]; |
| *vrHI = env->vregmapHI[tmp]; |
| } |
| |
| static void addInstr ( ISelEnv* env, X86Instr* instr ) |
| { |
| addHInstr(env->code, instr); |
| if (vex_traceflags & VEX_TRACE_VCODE) { |
| ppX86Instr(instr, False); |
| vex_printf("\n"); |
| } |
| } |
| |
| static HReg newVRegI ( ISelEnv* env ) |
| { |
| HReg reg = mkHReg(env->vreg_ctr, HRcInt32, True/*virtual reg*/); |
| env->vreg_ctr++; |
| return reg; |
| } |
| |
| static HReg newVRegF ( ISelEnv* env ) |
| { |
| HReg reg = mkHReg(env->vreg_ctr, HRcFlt64, True/*virtual reg*/); |
| env->vreg_ctr++; |
| return reg; |
| } |
| |
| static HReg newVRegV ( ISelEnv* env ) |
| { |
| HReg reg = mkHReg(env->vreg_ctr, HRcVec128, True/*virtual reg*/); |
| env->vreg_ctr++; |
| return reg; |
| } |
| |
| |
| /*---------------------------------------------------------*/ |
| /*--- ISEL: Forward declarations ---*/ |
| /*---------------------------------------------------------*/ |
| |
| /* These are organised as iselXXX and iselXXX_wrk pairs. The |
| iselXXX_wrk do the real work, but are not to be called directly. |
| For each XXX, iselXXX calls its iselXXX_wrk counterpart, then |
| checks that all returned registers are virtual. You should not |
| call the _wrk version directly. |
| */ |
| static X86RMI* iselIntExpr_RMI_wrk ( ISelEnv* env, IRExpr* e ); |
| static X86RMI* iselIntExpr_RMI ( ISelEnv* env, IRExpr* e ); |
| |
| static X86RI* iselIntExpr_RI_wrk ( ISelEnv* env, IRExpr* e ); |
| static X86RI* iselIntExpr_RI ( ISelEnv* env, IRExpr* e ); |
| |
| static X86RM* iselIntExpr_RM_wrk ( ISelEnv* env, IRExpr* e ); |
| static X86RM* iselIntExpr_RM ( ISelEnv* env, IRExpr* e ); |
| |
| static HReg iselIntExpr_R_wrk ( ISelEnv* env, IRExpr* e ); |
| static HReg iselIntExpr_R ( ISelEnv* env, IRExpr* e ); |
| |
| static X86AMode* iselIntExpr_AMode_wrk ( ISelEnv* env, IRExpr* e ); |
| static X86AMode* iselIntExpr_AMode ( ISelEnv* env, IRExpr* e ); |
| |
| static void iselInt64Expr_wrk ( HReg* rHi, HReg* rLo, |
| ISelEnv* env, IRExpr* e ); |
| static void iselInt64Expr ( HReg* rHi, HReg* rLo, |
| ISelEnv* env, IRExpr* e ); |
| |
| static X86CondCode iselCondCode_wrk ( ISelEnv* env, IRExpr* e ); |
| static X86CondCode iselCondCode ( ISelEnv* env, IRExpr* e ); |
| |
| static HReg iselDblExpr_wrk ( ISelEnv* env, IRExpr* e ); |
| static HReg iselDblExpr ( ISelEnv* env, IRExpr* e ); |
| |
| static HReg iselFltExpr_wrk ( ISelEnv* env, IRExpr* e ); |
| static HReg iselFltExpr ( ISelEnv* env, IRExpr* e ); |
| |
| static HReg iselVecExpr_wrk ( ISelEnv* env, IRExpr* e ); |
| static HReg iselVecExpr ( ISelEnv* env, IRExpr* e ); |
| |
| |
| /*---------------------------------------------------------*/ |
| /*--- ISEL: Misc helpers ---*/ |
| /*---------------------------------------------------------*/ |
| |
| /* Make a int reg-reg move. */ |
| |
| static X86Instr* mk_iMOVsd_RR ( HReg src, HReg dst ) |
| { |
| vassert(hregClass(src) == HRcInt32); |
| vassert(hregClass(dst) == HRcInt32); |
| return X86Instr_Alu32R(Xalu_MOV, X86RMI_Reg(src), dst); |
| } |
| |
| |
| /* Make a vector reg-reg move. */ |
| |
| static X86Instr* mk_vMOVsd_RR ( HReg src, HReg dst ) |
| { |
| vassert(hregClass(src) == HRcVec128); |
| vassert(hregClass(dst) == HRcVec128); |
| return X86Instr_SseReRg(Xsse_MOV, src, dst); |
| } |
| |
| /* Advance/retreat %esp by n. */ |
| |
| static void add_to_esp ( ISelEnv* env, Int n ) |
| { |
| vassert(n > 0 && n < 256 && (n%4) == 0); |
| addInstr(env, |
| X86Instr_Alu32R(Xalu_ADD, X86RMI_Imm(n), hregX86_ESP())); |
| } |
| |
| static void sub_from_esp ( ISelEnv* env, Int n ) |
| { |
| vassert(n > 0 && n < 256 && (n%4) == 0); |
| addInstr(env, |
| X86Instr_Alu32R(Xalu_SUB, X86RMI_Imm(n), hregX86_ESP())); |
| } |
| |
| |
| /* Given an amode, return one which references 4 bytes further |
| along. */ |
| |
| static X86AMode* advance4 ( X86AMode* am ) |
| { |
| X86AMode* am4 = dopyX86AMode(am); |
| switch (am4->tag) { |
| case Xam_IRRS: |
| am4->Xam.IRRS.imm += 4; break; |
| case Xam_IR: |
| am4->Xam.IR.imm += 4; break; |
| default: |
| vpanic("advance4(x86,host)"); |
| } |
| return am4; |
| } |
| |
| |
| /* Push an arg onto the host stack, in preparation for a call to a |
| helper function of some kind. Returns the number of 32-bit words |
| pushed. */ |
| |
| static Int pushArg ( ISelEnv* env, IRExpr* arg ) |
| { |
| IRType arg_ty = typeOfIRExpr(env->type_env, arg); |
| if (arg_ty == Ity_I32) { |
| addInstr(env, X86Instr_Push(iselIntExpr_RMI(env, arg))); |
| return 1; |
| } else |
| if (arg_ty == Ity_I64) { |
| HReg rHi, rLo; |
| iselInt64Expr(&rHi, &rLo, env, arg); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(rHi))); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(rLo))); |
| return 2; |
| } |
| ppIRExpr(arg); |
| vpanic("pushArg(x86): can't handle arg of this type"); |
| } |
| |
| |
| /* Complete the call to a helper function, by calling the |
| helper and clearing the args off the stack. */ |
| |
| static |
| void callHelperAndClearArgs ( ISelEnv* env, X86CondCode cc, |
| IRCallee* cee, Int n_arg_ws ) |
| { |
| /* Complication. Need to decide which reg to use as the fn address |
| pointer, in a way that doesn't trash regparm-passed |
| parameters. */ |
| vassert(sizeof(void*) == 4); |
| |
| addInstr(env, X86Instr_Call( cc, toUInt(Ptr_to_ULong(cee->addr)), |
| cee->regparms)); |
| if (n_arg_ws > 0) |
| add_to_esp(env, 4*n_arg_ws); |
| } |
| |
| |
| /* Used only in doHelperCall. See big comment in doHelperCall re |
| handling of regparm args. This function figures out whether |
| evaluation of an expression might require use of a fixed register. |
| If in doubt return True (safe but suboptimal). |
| */ |
| static |
| Bool mightRequireFixedRegs ( IRExpr* e ) |
| { |
| switch (e->tag) { |
| case Iex_Tmp: case Iex_Const: case Iex_Get: |
| return False; |
| default: |
| return True; |
| } |
| } |
| |
| |
| /* Do a complete function call. guard is a Ity_Bit expression |
| indicating whether or not the call happens. If guard==NULL, the |
| call is unconditional. */ |
| |
| static |
| void doHelperCall ( ISelEnv* env, |
| Bool passBBP, |
| IRExpr* guard, IRCallee* cee, IRExpr** args ) |
| { |
| X86CondCode cc; |
| HReg argregs[3]; |
| HReg tmpregs[3]; |
| Bool danger; |
| Int not_done_yet, n_args, n_arg_ws, stack_limit, |
| i, argreg, argregX; |
| |
| /* Marshal args for a call, do the call, and clear the stack. |
| Complexities to consider: |
| |
| * if passBBP is True, %ebp (the baseblock pointer) is to be |
| passed as the first arg. |
| |
| * If the callee claims regparmness of 1, 2 or 3, we must pass the |
| first 1, 2 or 3 args in registers (EAX, EDX, and ECX |
| respectively). To keep things relatively simple, only args of |
| type I32 may be passed as regparms -- just bomb out if anything |
| else turns up. Clearly this depends on the front ends not |
| trying to pass any other types as regparms. |
| */ |
| |
| /* 16 Nov 2004: the regparm handling is complicated by the |
| following problem. |
| |
| Consider a call two a function with two regparm parameters: |
| f(e1,e2). We need to compute e1 into %eax and e2 into %edx. |
| Suppose code is first generated to compute e1 into %eax. Then, |
| code is generated to compute e2 into %edx. Unfortunately, if |
| the latter code sequence uses %eax, it will trash the value of |
| e1 computed by the former sequence. This could happen if (for |
| example) e2 itself involved a function call. In the code below, |
| args are evaluated right-to-left, not left-to-right, but the |
| principle and the problem are the same. |
| |
| One solution is to compute all regparm-bound args into vregs |
| first, and once they are all done, move them to the relevant |
| real regs. This always gives correct code, but it also gives |
| a bunch of vreg-to-rreg moves which are usually redundant but |
| are hard for the register allocator to get rid of. |
| |
| A compromise is to first examine all regparm'd argument |
| expressions. If they are all so simple that it is clear |
| they will be evaluated without use of any fixed registers, |
| use the old compute-directly-to-fixed-target scheme. If not, |
| be safe and use the via-vregs scheme. |
| |
| Note this requires being able to examine an expression and |
| determine whether or not evaluation of it might use a fixed |
| register. That requires knowledge of how the rest of this |
| insn selector works. Currently just the following 3 are |
| regarded as safe -- hopefully they cover the majority of |
| arguments in practice: IRExpr_Tmp IRExpr_Const IRExpr_Get. |
| */ |
| vassert(cee->regparms >= 0 && cee->regparms <= 3); |
| |
| n_args = n_arg_ws = 0; |
| while (args[n_args]) n_args++; |
| |
| not_done_yet = n_args; |
| if (passBBP) |
| not_done_yet++; |
| |
| stack_limit = cee->regparms; |
| if (cee->regparms > 0 && passBBP) stack_limit--; |
| |
| /* ------ BEGIN marshall all arguments ------ */ |
| |
| /* Push (R to L) the stack-passed args, [n_args-1 .. stack_limit] */ |
| for (i = n_args-1; i >= stack_limit; i--) { |
| n_arg_ws += pushArg(env, args[i]); |
| not_done_yet--; |
| } |
| |
| /* args [stack_limit-1 .. 0] and possibly %ebp are to be passed in |
| registers. */ |
| |
| if (cee->regparms > 0) { |
| |
| /* ------ BEGIN deal with regparms ------ */ |
| |
| /* deal with regparms, not forgetting %ebp if needed. */ |
| argregs[0] = hregX86_EAX(); |
| argregs[1] = hregX86_EDX(); |
| argregs[2] = hregX86_ECX(); |
| tmpregs[0] = tmpregs[1] = tmpregs[2] = INVALID_HREG; |
| |
| argreg = cee->regparms; |
| |
| /* In keeping with big comment above, detect potential danger |
| and use the via-vregs scheme if needed. */ |
| danger = False; |
| for (i = stack_limit-1; i >= 0; i--) { |
| if (mightRequireFixedRegs(args[i])) { |
| danger = True; |
| break; |
| } |
| } |
| |
| if (danger) { |
| |
| /* Move via temporaries */ |
| argregX = argreg; |
| for (i = stack_limit-1; i >= 0; i--) { |
| |
| if (0) { |
| vex_printf("x86 host: register param is complex: "); |
| ppIRExpr(args[i]); |
| vex_printf("\n"); |
| } |
| |
| argreg--; |
| vassert(argreg >= 0); |
| vassert(typeOfIRExpr(env->type_env, args[i]) == Ity_I32); |
| tmpregs[argreg] = iselIntExpr_R(env, args[i]); |
| not_done_yet--; |
| } |
| for (i = stack_limit-1; i >= 0; i--) { |
| argregX--; |
| vassert(argregX >= 0); |
| addInstr( env, mk_iMOVsd_RR( tmpregs[argregX], argregs[argregX] ) ); |
| } |
| |
| } else { |
| /* It's safe to compute all regparm args directly into their |
| target registers. */ |
| for (i = stack_limit-1; i >= 0; i--) { |
| argreg--; |
| vassert(argreg >= 0); |
| vassert(typeOfIRExpr(env->type_env, args[i]) == Ity_I32); |
| addInstr(env, X86Instr_Alu32R(Xalu_MOV, |
| iselIntExpr_RMI(env, args[i]), |
| argregs[argreg])); |
| not_done_yet--; |
| } |
| |
| } |
| |
| /* Not forgetting %ebp if needed. */ |
| if (passBBP) { |
| vassert(argreg == 1); |
| addInstr(env, mk_iMOVsd_RR( hregX86_EBP(), argregs[0])); |
| not_done_yet--; |
| } |
| |
| /* ------ END deal with regparms ------ */ |
| |
| } else { |
| |
| /* No regparms. Heave %ebp on the stack if needed. */ |
| if (passBBP) { |
| addInstr(env, X86Instr_Push(X86RMI_Reg(hregX86_EBP()))); |
| n_arg_ws++; |
| not_done_yet--; |
| } |
| |
| } |
| |
| vassert(not_done_yet == 0); |
| |
| /* ------ END marshall all arguments ------ */ |
| |
| /* Now we can compute the condition. We can't do it earlier |
| because the argument computations could trash the condition |
| codes. Be a bit clever to handle the common case where the |
| guard is 1:Bit. */ |
| cc = Xcc_ALWAYS; |
| if (guard) { |
| if (guard->tag == Iex_Const |
| && guard->Iex.Const.con->tag == Ico_U1 |
| && guard->Iex.Const.con->Ico.U1 == True) { |
| /* unconditional -- do nothing */ |
| } else { |
| cc = iselCondCode( env, guard ); |
| } |
| } |
| |
| /* call the helper, and get the args off the stack afterwards. */ |
| callHelperAndClearArgs( env, cc, cee, n_arg_ws ); |
| } |
| |
| |
| /* Given a guest-state array descriptor, an index expression and a |
| bias, generate an X86AMode holding the relevant guest state |
| offset. */ |
| |
| static |
| X86AMode* genGuestArrayOffset ( ISelEnv* env, IRArray* descr, |
| IRExpr* off, Int bias ) |
| { |
| HReg tmp, roff; |
| Int elemSz = sizeofIRType(descr->elemTy); |
| Int nElems = descr->nElems; |
| Int shift = 0; |
| |
| /* throw out any cases not generated by an x86 front end. In |
| theory there might be a day where we need to handle them -- if |
| we ever run non-x86-guest on x86 host. */ |
| |
| if (nElems != 8) |
| vpanic("genGuestArrayOffset(x86 host)(1)"); |
| |
| switch (elemSz) { |
| case 1: shift = 0; break; |
| case 4: shift = 2; break; |
| case 8: shift = 3; break; |
| default: vpanic("genGuestArrayOffset(x86 host)(2)"); |
| } |
| |
| /* Compute off into a reg, %off. Then return: |
| |
| movl %off, %tmp |
| addl $bias, %tmp (if bias != 0) |
| andl %tmp, 7 |
| ... base(%ebp, %tmp, shift) ... |
| */ |
| tmp = newVRegI(env); |
| roff = iselIntExpr_R(env, off); |
| addInstr(env, mk_iMOVsd_RR(roff, tmp)); |
| if (bias != 0) { |
| addInstr(env, |
| X86Instr_Alu32R(Xalu_ADD, X86RMI_Imm(bias), tmp)); |
| } |
| addInstr(env, |
| X86Instr_Alu32R(Xalu_AND, X86RMI_Imm(7), tmp)); |
| return |
| X86AMode_IRRS( descr->base, hregX86_EBP(), tmp, shift ); |
| } |
| |
| |
| /* Mess with the FPU's rounding mode: set to the default rounding mode |
| (DEFAULT_FPUCW). */ |
| static |
| void set_FPU_rounding_default ( ISelEnv* env ) |
| { |
| /* pushl $DEFAULT_FPUCW |
| fldcw 0(%esp) |
| addl $4, %esp |
| */ |
| X86AMode* zero_esp = X86AMode_IR(0, hregX86_ESP()); |
| addInstr(env, X86Instr_Push(X86RMI_Imm(DEFAULT_FPUCW))); |
| addInstr(env, X86Instr_FpLdCW(zero_esp)); |
| add_to_esp(env, 4); |
| } |
| |
| |
| /* Mess with the FPU's rounding mode: 'mode' is an I32-typed |
| expression denoting a value in the range 0 .. 3, indicating a round |
| mode encoded as per type IRRoundingMode. Set the x87 FPU to have |
| the same rounding. |
| */ |
| static |
| void set_FPU_rounding_mode ( ISelEnv* env, IRExpr* mode ) |
| { |
| HReg rrm = iselIntExpr_R(env, mode); |
| HReg rrm2 = newVRegI(env); |
| X86AMode* zero_esp = X86AMode_IR(0, hregX86_ESP()); |
| |
| /* movl %rrm, %rrm2 |
| andl $3, %rrm2 -- shouldn't be needed; paranoia |
| shll $10, %rrm2 |
| orl $DEFAULT_FPUCW, %rrm2 |
| pushl %rrm2 |
| fldcw 0(%esp) |
| addl $4, %esp |
| */ |
| addInstr(env, mk_iMOVsd_RR(rrm, rrm2)); |
| addInstr(env, X86Instr_Alu32R(Xalu_AND, X86RMI_Imm(3), rrm2)); |
| addInstr(env, X86Instr_Sh32(Xsh_SHL, 10, rrm2)); |
| addInstr(env, X86Instr_Alu32R(Xalu_OR, X86RMI_Imm(DEFAULT_FPUCW), rrm2)); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(rrm2))); |
| addInstr(env, X86Instr_FpLdCW(zero_esp)); |
| add_to_esp(env, 4); |
| } |
| |
| |
| /* Generate !src into a new vector register, and be sure that the code |
| is SSE1 compatible. Amazing that Intel doesn't offer a less crappy |
| way to do this. |
| */ |
| static HReg do_sse_Not128 ( ISelEnv* env, HReg src ) |
| { |
| HReg dst = newVRegV(env); |
| /* Set dst to zero. If dst contains a NaN then all hell might |
| break loose after the comparison. So, first zero it. */ |
| addInstr(env, X86Instr_SseReRg(Xsse_XOR, dst, dst)); |
| /* And now make it all 1s ... */ |
| addInstr(env, X86Instr_Sse32Fx4(Xsse_CMPEQF, dst, dst)); |
| /* Finally, xor 'src' into it. */ |
| addInstr(env, X86Instr_SseReRg(Xsse_XOR, src, dst)); |
| /* Doesn't that just totally suck? */ |
| return dst; |
| } |
| |
| |
| /* Round an x87 FPU value to 53-bit-mantissa precision, to be used |
| after most non-simple FPU operations (simple = +, -, *, / and |
| sqrt). |
| |
| This could be done a lot more efficiently if needed, by loading |
| zero and adding it to the value to be rounded (fldz ; faddp?). |
| */ |
| static void roundToF64 ( ISelEnv* env, HReg reg ) |
| { |
| X86AMode* zero_esp = X86AMode_IR(0, hregX86_ESP()); |
| sub_from_esp(env, 8); |
| addInstr(env, X86Instr_FpLdSt(False/*store*/, 8, reg, zero_esp)); |
| addInstr(env, X86Instr_FpLdSt(True/*load*/, 8, reg, zero_esp)); |
| add_to_esp(env, 8); |
| } |
| |
| |
| /*---------------------------------------------------------*/ |
| /*--- ISEL: Integer expressions (32/16/8 bit) ---*/ |
| /*---------------------------------------------------------*/ |
| |
| /* Select insns for an integer-typed expression, and add them to the |
| code list. Return a reg holding the result. This reg will be a |
| virtual register. THE RETURNED REG MUST NOT BE MODIFIED. If you |
| want to modify it, ask for a new vreg, copy it in there, and modify |
| the copy. The register allocator will do its best to map both |
| vregs to the same real register, so the copies will often disappear |
| later in the game. |
| |
| This should handle expressions of 32, 16 and 8-bit type. All |
| results are returned in a 32-bit register. For 16- and 8-bit |
| expressions, the upper 16/24 bits are arbitrary, so you should mask |
| or sign extend partial values if necessary. |
| */ |
| |
| static HReg iselIntExpr_R ( ISelEnv* env, IRExpr* e ) |
| { |
| HReg r = iselIntExpr_R_wrk(env, e); |
| /* sanity checks ... */ |
| # if 0 |
| vex_printf("\n"); ppIRExpr(e); vex_printf("\n"); |
| # endif |
| vassert(hregClass(r) == HRcInt32); |
| vassert(hregIsVirtual(r)); |
| return r; |
| } |
| |
| /* DO NOT CALL THIS DIRECTLY ! */ |
| static HReg iselIntExpr_R_wrk ( ISelEnv* env, IRExpr* e ) |
| { |
| MatchInfo mi; |
| DECLARE_PATTERN(p_32to1_then_1Uto8); |
| |
| IRType ty = typeOfIRExpr(env->type_env,e); |
| vassert(ty == Ity_I32 || ty == Ity_I16 || ty == Ity_I8); |
| |
| switch (e->tag) { |
| |
| /* --------- TEMP --------- */ |
| case Iex_Tmp: { |
| return lookupIRTemp(env, e->Iex.Tmp.tmp); |
| } |
| |
| /* --------- LOAD --------- */ |
| case Iex_Load: { |
| HReg dst = newVRegI(env); |
| X86AMode* amode = iselIntExpr_AMode ( env, e->Iex.Load.addr ); |
| |
| if (e->Iex.Load.end != Iend_LE) |
| goto irreducible; |
| |
| if (ty == Ity_I32) { |
| addInstr(env, X86Instr_Alu32R(Xalu_MOV, |
| X86RMI_Mem(amode), dst) ); |
| return dst; |
| } |
| if (ty == Ity_I16) { |
| addInstr(env, X86Instr_LoadEX(2,False,amode,dst)); |
| return dst; |
| } |
| if (ty == Ity_I8) { |
| addInstr(env, X86Instr_LoadEX(1,False,amode,dst)); |
| return dst; |
| } |
| break; |
| } |
| |
| /* --------- TERNARY OP --------- */ |
| case Iex_Triop: { |
| /* C3210 flags following FPU partial remainder (fprem), both |
| IEEE compliant (PREM1) and non-IEEE compliant (PREM). */ |
| if (e->Iex.Triop.op == Iop_PRemC3210F64 |
| || e->Iex.Triop.op == Iop_PRem1C3210F64) { |
| HReg junk = newVRegF(env); |
| HReg dst = newVRegI(env); |
| HReg srcL = iselDblExpr(env, e->Iex.Triop.arg2); |
| HReg srcR = iselDblExpr(env, e->Iex.Triop.arg3); |
| /* XXXROUNDINGFIXME */ |
| /* set roundingmode here */ |
| addInstr(env, X86Instr_FpBinary( |
| e->Iex.Binop.op==Iop_PRemC3210F64 |
| ? Xfp_PREM : Xfp_PREM1, |
| srcL,srcR,junk |
| )); |
| /* The previous pseudo-insn will have left the FPU's C3210 |
| flags set correctly. So bag them. */ |
| addInstr(env, X86Instr_FpStSW_AX()); |
| addInstr(env, mk_iMOVsd_RR(hregX86_EAX(), dst)); |
| addInstr(env, X86Instr_Alu32R(Xalu_AND, X86RMI_Imm(0x4700), dst)); |
| return dst; |
| } |
| |
| break; |
| } |
| |
| /* --------- BINARY OP --------- */ |
| case Iex_Binop: { |
| X86AluOp aluOp; |
| X86ShiftOp shOp; |
| |
| /* Is it an addition or logical style op? */ |
| switch (e->Iex.Binop.op) { |
| case Iop_Add8: case Iop_Add16: case Iop_Add32: |
| aluOp = Xalu_ADD; break; |
| case Iop_Sub8: case Iop_Sub16: case Iop_Sub32: |
| aluOp = Xalu_SUB; break; |
| case Iop_And8: case Iop_And16: case Iop_And32: |
| aluOp = Xalu_AND; break; |
| case Iop_Or8: case Iop_Or16: case Iop_Or32: |
| aluOp = Xalu_OR; break; |
| case Iop_Xor8: case Iop_Xor16: case Iop_Xor32: |
| aluOp = Xalu_XOR; break; |
| case Iop_Mul16: case Iop_Mul32: |
| aluOp = Xalu_MUL; break; |
| default: |
| aluOp = Xalu_INVALID; break; |
| } |
| /* For commutative ops we assume any literal |
| values are on the second operand. */ |
| if (aluOp != Xalu_INVALID) { |
| HReg dst = newVRegI(env); |
| HReg reg = iselIntExpr_R(env, e->Iex.Binop.arg1); |
| X86RMI* rmi = iselIntExpr_RMI(env, e->Iex.Binop.arg2); |
| addInstr(env, mk_iMOVsd_RR(reg,dst)); |
| addInstr(env, X86Instr_Alu32R(aluOp, rmi, dst)); |
| return dst; |
| } |
| /* Could do better here; forcing the first arg into a reg |
| isn't always clever. |
| -- t70 = Xor32(And32(Xor32(LDle:I32(Add32(t41,0xFFFFFFA0:I32)), |
| LDle:I32(Add32(t41,0xFFFFFFA4:I32))),LDle:I32(Add32( |
| t41,0xFFFFFFA8:I32))),LDle:I32(Add32(t41,0xFFFFFFA0:I32))) |
| movl 0xFFFFFFA0(%vr41),%vr107 |
| movl 0xFFFFFFA4(%vr41),%vr108 |
| movl %vr107,%vr106 |
| xorl %vr108,%vr106 |
| movl 0xFFFFFFA8(%vr41),%vr109 |
| movl %vr106,%vr105 |
| andl %vr109,%vr105 |
| movl 0xFFFFFFA0(%vr41),%vr110 |
| movl %vr105,%vr104 |
| xorl %vr110,%vr104 |
| movl %vr104,%vr70 |
| */ |
| |
| /* Perhaps a shift op? */ |
| switch (e->Iex.Binop.op) { |
| case Iop_Shl32: case Iop_Shl16: case Iop_Shl8: |
| shOp = Xsh_SHL; break; |
| case Iop_Shr32: case Iop_Shr16: case Iop_Shr8: |
| shOp = Xsh_SHR; break; |
| case Iop_Sar32: case Iop_Sar16: case Iop_Sar8: |
| shOp = Xsh_SAR; break; |
| default: |
| shOp = Xsh_INVALID; break; |
| } |
| if (shOp != Xsh_INVALID) { |
| HReg dst = newVRegI(env); |
| |
| /* regL = the value to be shifted */ |
| HReg regL = iselIntExpr_R(env, e->Iex.Binop.arg1); |
| addInstr(env, mk_iMOVsd_RR(regL,dst)); |
| |
| /* Do any necessary widening for 16/8 bit operands */ |
| switch (e->Iex.Binop.op) { |
| case Iop_Shr8: |
| addInstr(env, X86Instr_Alu32R( |
| Xalu_AND, X86RMI_Imm(0xFF), dst)); |
| break; |
| case Iop_Shr16: |
| addInstr(env, X86Instr_Alu32R( |
| Xalu_AND, X86RMI_Imm(0xFFFF), dst)); |
| break; |
| case Iop_Sar8: |
| addInstr(env, X86Instr_Sh32(Xsh_SHL, 24, dst)); |
| addInstr(env, X86Instr_Sh32(Xsh_SAR, 24, dst)); |
| break; |
| case Iop_Sar16: |
| addInstr(env, X86Instr_Sh32(Xsh_SHL, 16, dst)); |
| addInstr(env, X86Instr_Sh32(Xsh_SAR, 16, dst)); |
| break; |
| default: break; |
| } |
| |
| /* Now consider the shift amount. If it's a literal, we |
| can do a much better job than the general case. */ |
| if (e->Iex.Binop.arg2->tag == Iex_Const) { |
| /* assert that the IR is well-typed */ |
| Int nshift; |
| vassert(e->Iex.Binop.arg2->Iex.Const.con->tag == Ico_U8); |
| nshift = e->Iex.Binop.arg2->Iex.Const.con->Ico.U8; |
| vassert(nshift >= 0); |
| if (nshift > 0) |
| /* Can't allow nshift==0 since that means %cl */ |
| addInstr(env, X86Instr_Sh32( shOp, nshift, dst )); |
| } else { |
| /* General case; we have to force the amount into %cl. */ |
| HReg regR = iselIntExpr_R(env, e->Iex.Binop.arg2); |
| addInstr(env, mk_iMOVsd_RR(regR,hregX86_ECX())); |
| addInstr(env, X86Instr_Sh32(shOp, 0/* %cl */, dst)); |
| } |
| return dst; |
| } |
| |
| /* Handle misc other ops. */ |
| if (e->Iex.Binop.op == Iop_8HLto16) { |
| HReg hi8 = newVRegI(env); |
| HReg lo8 = newVRegI(env); |
| HReg hi8s = iselIntExpr_R(env, e->Iex.Binop.arg1); |
| HReg lo8s = iselIntExpr_R(env, e->Iex.Binop.arg2); |
| addInstr(env, mk_iMOVsd_RR(hi8s, hi8)); |
| addInstr(env, mk_iMOVsd_RR(lo8s, lo8)); |
| addInstr(env, X86Instr_Sh32(Xsh_SHL, 8, hi8)); |
| addInstr(env, X86Instr_Alu32R(Xalu_AND, X86RMI_Imm(0xFF), lo8)); |
| addInstr(env, X86Instr_Alu32R(Xalu_OR, X86RMI_Reg(lo8), hi8)); |
| return hi8; |
| } |
| |
| if (e->Iex.Binop.op == Iop_16HLto32) { |
| HReg hi16 = newVRegI(env); |
| HReg lo16 = newVRegI(env); |
| HReg hi16s = iselIntExpr_R(env, e->Iex.Binop.arg1); |
| HReg lo16s = iselIntExpr_R(env, e->Iex.Binop.arg2); |
| addInstr(env, mk_iMOVsd_RR(hi16s, hi16)); |
| addInstr(env, mk_iMOVsd_RR(lo16s, lo16)); |
| addInstr(env, X86Instr_Sh32(Xsh_SHL, 16, hi16)); |
| addInstr(env, X86Instr_Alu32R(Xalu_AND, X86RMI_Imm(0xFFFF), lo16)); |
| addInstr(env, X86Instr_Alu32R(Xalu_OR, X86RMI_Reg(lo16), hi16)); |
| return hi16; |
| } |
| |
| if (e->Iex.Binop.op == Iop_MullS16 || e->Iex.Binop.op == Iop_MullS8 |
| || e->Iex.Binop.op == Iop_MullU16 || e->Iex.Binop.op == Iop_MullU8) { |
| HReg a16 = newVRegI(env); |
| HReg b16 = newVRegI(env); |
| HReg a16s = iselIntExpr_R(env, e->Iex.Binop.arg1); |
| HReg b16s = iselIntExpr_R(env, e->Iex.Binop.arg2); |
| Int shift = (e->Iex.Binop.op == Iop_MullS8 |
| || e->Iex.Binop.op == Iop_MullU8) |
| ? 24 : 16; |
| X86ShiftOp shr_op = (e->Iex.Binop.op == Iop_MullS8 |
| || e->Iex.Binop.op == Iop_MullS16) |
| ? Xsh_SAR : Xsh_SHR; |
| |
| addInstr(env, mk_iMOVsd_RR(a16s, a16)); |
| addInstr(env, mk_iMOVsd_RR(b16s, b16)); |
| addInstr(env, X86Instr_Sh32(Xsh_SHL, shift, a16)); |
| addInstr(env, X86Instr_Sh32(Xsh_SHL, shift, b16)); |
| addInstr(env, X86Instr_Sh32(shr_op, shift, a16)); |
| addInstr(env, X86Instr_Sh32(shr_op, shift, b16)); |
| addInstr(env, X86Instr_Alu32R(Xalu_MUL, X86RMI_Reg(a16), b16)); |
| return b16; |
| } |
| |
| if (e->Iex.Binop.op == Iop_CmpF64) { |
| HReg fL = iselDblExpr(env, e->Iex.Binop.arg1); |
| HReg fR = iselDblExpr(env, e->Iex.Binop.arg2); |
| HReg dst = newVRegI(env); |
| addInstr(env, X86Instr_FpCmp(fL,fR,dst)); |
| /* shift this right 8 bits so as to conform to CmpF64 |
| definition. */ |
| addInstr(env, X86Instr_Sh32(Xsh_SHR, 8, dst)); |
| return dst; |
| } |
| |
| if (e->Iex.Binop.op == Iop_F64toI32 || e->Iex.Binop.op == Iop_F64toI16) { |
| Int sz = e->Iex.Binop.op == Iop_F64toI16 ? 2 : 4; |
| HReg rf = iselDblExpr(env, e->Iex.Binop.arg2); |
| HReg dst = newVRegI(env); |
| |
| /* Used several times ... */ |
| X86AMode* zero_esp = X86AMode_IR(0, hregX86_ESP()); |
| |
| /* rf now holds the value to be converted, and rrm holds the |
| rounding mode value, encoded as per the IRRoundingMode |
| enum. The first thing to do is set the FPU's rounding |
| mode accordingly. */ |
| |
| /* Create a space for the format conversion. */ |
| /* subl $4, %esp */ |
| sub_from_esp(env, 4); |
| |
| /* Set host rounding mode */ |
| set_FPU_rounding_mode( env, e->Iex.Binop.arg1 ); |
| |
| /* gistw/l %rf, 0(%esp) */ |
| addInstr(env, X86Instr_FpLdStI(False/*store*/, |
| toUChar(sz), rf, zero_esp)); |
| |
| if (sz == 2) { |
| /* movzwl 0(%esp), %dst */ |
| addInstr(env, X86Instr_LoadEX(2,False,zero_esp,dst)); |
| } else { |
| /* movl 0(%esp), %dst */ |
| vassert(sz == 4); |
| addInstr(env, X86Instr_Alu32R( |
| Xalu_MOV, X86RMI_Mem(zero_esp), dst)); |
| } |
| |
| /* Restore default FPU rounding. */ |
| set_FPU_rounding_default( env ); |
| |
| /* addl $4, %esp */ |
| add_to_esp(env, 4); |
| return dst; |
| } |
| |
| break; |
| } |
| |
| /* --------- UNARY OP --------- */ |
| case Iex_Unop: { |
| /* 1Uto8(32to1(expr32)) */ |
| DEFINE_PATTERN(p_32to1_then_1Uto8, |
| unop(Iop_1Uto8,unop(Iop_32to1,bind(0)))); |
| if (matchIRExpr(&mi,p_32to1_then_1Uto8,e)) { |
| IRExpr* expr32 = mi.bindee[0]; |
| HReg dst = newVRegI(env); |
| HReg src = iselIntExpr_R(env, expr32); |
| addInstr(env, mk_iMOVsd_RR(src,dst) ); |
| addInstr(env, X86Instr_Alu32R(Xalu_AND, |
| X86RMI_Imm(1), dst)); |
| return dst; |
| } |
| |
| /* 16Uto32(LDle(expr32)) */ |
| { |
| DECLARE_PATTERN(p_LDle16_then_16Uto32); |
| DEFINE_PATTERN(p_LDle16_then_16Uto32, |
| unop(Iop_16Uto32, |
| IRExpr_Load(Iend_LE,Ity_I16,bind(0))) ); |
| if (matchIRExpr(&mi,p_LDle16_then_16Uto32,e)) { |
| HReg dst = newVRegI(env); |
| X86AMode* amode = iselIntExpr_AMode ( env, mi.bindee[0] ); |
| addInstr(env, X86Instr_LoadEX(2,False,amode,dst)); |
| return dst; |
| } |
| } |
| |
| switch (e->Iex.Unop.op) { |
| case Iop_8Uto16: |
| case Iop_8Uto32: |
| case Iop_16Uto32: { |
| HReg dst = newVRegI(env); |
| HReg src = iselIntExpr_R(env, e->Iex.Unop.arg); |
| UInt mask = e->Iex.Unop.op==Iop_16Uto32 ? 0xFFFF : 0xFF; |
| addInstr(env, mk_iMOVsd_RR(src,dst) ); |
| addInstr(env, X86Instr_Alu32R(Xalu_AND, |
| X86RMI_Imm(mask), dst)); |
| return dst; |
| } |
| case Iop_8Sto16: |
| case Iop_8Sto32: |
| case Iop_16Sto32: { |
| HReg dst = newVRegI(env); |
| HReg src = iselIntExpr_R(env, e->Iex.Unop.arg); |
| UInt amt = e->Iex.Unop.op==Iop_16Sto32 ? 16 : 24; |
| addInstr(env, mk_iMOVsd_RR(src,dst) ); |
| addInstr(env, X86Instr_Sh32(Xsh_SHL, amt, dst)); |
| addInstr(env, X86Instr_Sh32(Xsh_SAR, amt, dst)); |
| return dst; |
| } |
| case Iop_Not8: |
| case Iop_Not16: |
| case Iop_Not32: { |
| HReg dst = newVRegI(env); |
| HReg src = iselIntExpr_R(env, e->Iex.Unop.arg); |
| addInstr(env, mk_iMOVsd_RR(src,dst) ); |
| addInstr(env, X86Instr_Unary32(Xun_NOT,dst)); |
| return dst; |
| } |
| case Iop_64HIto32: { |
| HReg rHi, rLo; |
| iselInt64Expr(&rHi,&rLo, env, e->Iex.Unop.arg); |
| return rHi; /* and abandon rLo .. poor wee thing :-) */ |
| } |
| case Iop_64to32: { |
| HReg rHi, rLo; |
| iselInt64Expr(&rHi,&rLo, env, e->Iex.Unop.arg); |
| return rLo; /* similar stupid comment to the above ... */ |
| } |
| case Iop_16HIto8: |
| case Iop_32HIto16: { |
| HReg dst = newVRegI(env); |
| HReg src = iselIntExpr_R(env, e->Iex.Unop.arg); |
| Int shift = e->Iex.Unop.op == Iop_16HIto8 ? 8 : 16; |
| addInstr(env, mk_iMOVsd_RR(src,dst) ); |
| addInstr(env, X86Instr_Sh32(Xsh_SHR, shift, dst)); |
| return dst; |
| } |
| case Iop_1Uto32: |
| case Iop_1Uto8: { |
| HReg dst = newVRegI(env); |
| X86CondCode cond = iselCondCode(env, e->Iex.Unop.arg); |
| addInstr(env, X86Instr_Set32(cond,dst)); |
| return dst; |
| } |
| case Iop_1Sto8: |
| case Iop_1Sto16: |
| case Iop_1Sto32: { |
| /* could do better than this, but for now ... */ |
| HReg dst = newVRegI(env); |
| X86CondCode cond = iselCondCode(env, e->Iex.Unop.arg); |
| addInstr(env, X86Instr_Set32(cond,dst)); |
| addInstr(env, X86Instr_Sh32(Xsh_SHL, 31, dst)); |
| addInstr(env, X86Instr_Sh32(Xsh_SAR, 31, dst)); |
| return dst; |
| } |
| case Iop_Ctz32: { |
| /* Count trailing zeroes, implemented by x86 'bsfl' */ |
| HReg dst = newVRegI(env); |
| HReg src = iselIntExpr_R(env, e->Iex.Unop.arg); |
| addInstr(env, X86Instr_Bsfr32(True,src,dst)); |
| return dst; |
| } |
| case Iop_Clz32: { |
| /* Count leading zeroes. Do 'bsrl' to establish the index |
| of the highest set bit, and subtract that value from |
| 31. */ |
| HReg tmp = newVRegI(env); |
| HReg dst = newVRegI(env); |
| HReg src = iselIntExpr_R(env, e->Iex.Unop.arg); |
| addInstr(env, X86Instr_Bsfr32(False,src,tmp)); |
| addInstr(env, X86Instr_Alu32R(Xalu_MOV, |
| X86RMI_Imm(31), dst)); |
| addInstr(env, X86Instr_Alu32R(Xalu_SUB, |
| X86RMI_Reg(tmp), dst)); |
| return dst; |
| } |
| case Iop_Neg8: |
| case Iop_Neg16: |
| case Iop_Neg32: { |
| HReg dst = newVRegI(env); |
| HReg reg = iselIntExpr_R(env, e->Iex.Unop.arg); |
| addInstr(env, mk_iMOVsd_RR(reg,dst)); |
| addInstr(env, X86Instr_Unary32(Xun_NEG,dst)); |
| return dst; |
| } |
| |
| case Iop_V128to32: { |
| HReg dst = newVRegI(env); |
| HReg vec = iselVecExpr(env, e->Iex.Unop.arg); |
| X86AMode* esp0 = X86AMode_IR(0, hregX86_ESP()); |
| sub_from_esp(env, 16); |
| addInstr(env, X86Instr_SseLdSt(False/*store*/, vec, esp0)); |
| addInstr(env, X86Instr_Alu32R( Xalu_MOV, X86RMI_Mem(esp0), dst )); |
| add_to_esp(env, 16); |
| return dst; |
| } |
| |
| case Iop_16to8: |
| case Iop_32to8: |
| case Iop_32to16: |
| /* These are no-ops. */ |
| return iselIntExpr_R(env, e->Iex.Unop.arg); |
| |
| default: |
| break; |
| } |
| break; |
| } |
| |
| /* --------- GET --------- */ |
| case Iex_Get: { |
| if (ty == Ity_I32) { |
| HReg dst = newVRegI(env); |
| addInstr(env, X86Instr_Alu32R( |
| Xalu_MOV, |
| X86RMI_Mem(X86AMode_IR(e->Iex.Get.offset, |
| hregX86_EBP())), |
| dst)); |
| return dst; |
| } |
| if (ty == Ity_I8 || ty == Ity_I16) { |
| HReg dst = newVRegI(env); |
| addInstr(env, X86Instr_LoadEX( |
| toUChar(ty==Ity_I8 ? 1 : 2), |
| False, |
| X86AMode_IR(e->Iex.Get.offset,hregX86_EBP()), |
| dst)); |
| return dst; |
| } |
| break; |
| } |
| |
| case Iex_GetI: { |
| X86AMode* am |
| = genGuestArrayOffset( |
| env, e->Iex.GetI.descr, |
| e->Iex.GetI.ix, e->Iex.GetI.bias ); |
| HReg dst = newVRegI(env); |
| if (ty == Ity_I8) { |
| addInstr(env, X86Instr_LoadEX( 1, False, am, dst )); |
| return dst; |
| } |
| if (ty == Ity_I32) { |
| addInstr(env, X86Instr_Alu32R(Xalu_MOV, X86RMI_Mem(am), dst)); |
| return dst; |
| } |
| break; |
| } |
| |
| /* --------- CCALL --------- */ |
| case Iex_CCall: { |
| HReg dst = newVRegI(env); |
| vassert(ty == e->Iex.CCall.retty); |
| |
| /* be very restrictive for now. Only 32/64-bit ints allowed |
| for args, and 32 bits for return type. */ |
| if (e->Iex.CCall.retty != Ity_I32) |
| goto irreducible; |
| |
| /* Marshal args, do the call, clear stack. */ |
| doHelperCall( env, False, NULL, e->Iex.CCall.cee, e->Iex.CCall.args ); |
| |
| addInstr(env, mk_iMOVsd_RR(hregX86_EAX(), dst)); |
| return dst; |
| } |
| |
| /* --------- LITERAL --------- */ |
| /* 32/16/8-bit literals */ |
| case Iex_Const: { |
| X86RMI* rmi = iselIntExpr_RMI ( env, e ); |
| HReg r = newVRegI(env); |
| addInstr(env, X86Instr_Alu32R(Xalu_MOV, rmi, r)); |
| return r; |
| } |
| |
| /* --------- MULTIPLEX --------- */ |
| case Iex_Mux0X: { |
| if ((ty == Ity_I32 || ty == Ity_I16 || ty == Ity_I8) |
| && typeOfIRExpr(env->type_env,e->Iex.Mux0X.cond) == Ity_I8) { |
| HReg r8; |
| HReg rX = iselIntExpr_R(env, e->Iex.Mux0X.exprX); |
| X86RM* r0 = iselIntExpr_RM(env, e->Iex.Mux0X.expr0); |
| HReg dst = newVRegI(env); |
| addInstr(env, mk_iMOVsd_RR(rX,dst)); |
| r8 = iselIntExpr_R(env, e->Iex.Mux0X.cond); |
| addInstr(env, X86Instr_Test32(0xFF, r8)); |
| addInstr(env, X86Instr_CMov32(Xcc_Z,r0,dst)); |
| return dst; |
| } |
| break; |
| } |
| |
| default: |
| break; |
| } /* switch (e->tag) */ |
| |
| /* We get here if no pattern matched. */ |
| irreducible: |
| ppIRExpr(e); |
| vpanic("iselIntExpr_R: cannot reduce tree"); |
| } |
| |
| |
| /*---------------------------------------------------------*/ |
| /*--- ISEL: Integer expression auxiliaries ---*/ |
| /*---------------------------------------------------------*/ |
| |
| /* --------------------- AMODEs --------------------- */ |
| |
| /* Return an AMode which computes the value of the specified |
| expression, possibly also adding insns to the code list as a |
| result. The expression may only be a 32-bit one. |
| */ |
| |
| static Bool sane_AMode ( X86AMode* am ) |
| { |
| switch (am->tag) { |
| case Xam_IR: |
| return |
| toBool( hregClass(am->Xam.IR.reg) == HRcInt32 |
| && (hregIsVirtual(am->Xam.IR.reg) |
| || am->Xam.IR.reg == hregX86_EBP()) ); |
| case Xam_IRRS: |
| return |
| toBool( hregClass(am->Xam.IRRS.base) == HRcInt32 |
| && hregIsVirtual(am->Xam.IRRS.base) |
| && hregClass(am->Xam.IRRS.index) == HRcInt32 |
| && hregIsVirtual(am->Xam.IRRS.index) ); |
| default: |
| vpanic("sane_AMode: unknown x86 amode tag"); |
| } |
| } |
| |
| static X86AMode* iselIntExpr_AMode ( ISelEnv* env, IRExpr* e ) |
| { |
| X86AMode* am = iselIntExpr_AMode_wrk(env, e); |
| vassert(sane_AMode(am)); |
| return am; |
| } |
| |
| /* DO NOT CALL THIS DIRECTLY ! */ |
| static X86AMode* iselIntExpr_AMode_wrk ( ISelEnv* env, IRExpr* e ) |
| { |
| IRType ty = typeOfIRExpr(env->type_env,e); |
| vassert(ty == Ity_I32); |
| |
| /* Add32(expr1, Shl32(expr2, imm)) */ |
| if (e->tag == Iex_Binop |
| && e->Iex.Binop.op == Iop_Add32 |
| && e->Iex.Binop.arg2->tag == Iex_Binop |
| && e->Iex.Binop.arg2->Iex.Binop.op == Iop_Shl32 |
| && e->Iex.Binop.arg2->Iex.Binop.arg2->tag == Iex_Const |
| && e->Iex.Binop.arg2->Iex.Binop.arg2->Iex.Const.con->tag == Ico_U8) { |
| UInt shift = e->Iex.Binop.arg2->Iex.Binop.arg2->Iex.Const.con->Ico.U8; |
| if (shift == 1 || shift == 2 || shift == 3) { |
| HReg r1 = iselIntExpr_R(env, e->Iex.Binop.arg1); |
| HReg r2 = iselIntExpr_R(env, e->Iex.Binop.arg2->Iex.Binop.arg1 ); |
| return X86AMode_IRRS(0, r1, r2, shift); |
| } |
| } |
| |
| /* Add32(expr,i) */ |
| if (e->tag == Iex_Binop |
| && e->Iex.Binop.op == Iop_Add32 |
| && e->Iex.Binop.arg2->tag == Iex_Const |
| && e->Iex.Binop.arg2->Iex.Const.con->tag == Ico_U32) { |
| HReg r1 = iselIntExpr_R(env, e->Iex.Binop.arg1); |
| return X86AMode_IR(e->Iex.Binop.arg2->Iex.Const.con->Ico.U32, r1); |
| } |
| |
| /* Doesn't match anything in particular. Generate it into |
| a register and use that. */ |
| { |
| HReg r1 = iselIntExpr_R(env, e); |
| return X86AMode_IR(0, r1); |
| } |
| } |
| |
| |
| /* --------------------- RMIs --------------------- */ |
| |
| /* Similarly, calculate an expression into an X86RMI operand. As with |
| iselIntExpr_R, the expression can have type 32, 16 or 8 bits. */ |
| |
| static X86RMI* iselIntExpr_RMI ( ISelEnv* env, IRExpr* e ) |
| { |
| X86RMI* rmi = iselIntExpr_RMI_wrk(env, e); |
| /* sanity checks ... */ |
| switch (rmi->tag) { |
| case Xrmi_Imm: |
| return rmi; |
| case Xrmi_Reg: |
| vassert(hregClass(rmi->Xrmi.Reg.reg) == HRcInt32); |
| vassert(hregIsVirtual(rmi->Xrmi.Reg.reg)); |
| return rmi; |
| case Xrmi_Mem: |
| vassert(sane_AMode(rmi->Xrmi.Mem.am)); |
| return rmi; |
| default: |
| vpanic("iselIntExpr_RMI: unknown x86 RMI tag"); |
| } |
| } |
| |
| /* DO NOT CALL THIS DIRECTLY ! */ |
| static X86RMI* iselIntExpr_RMI_wrk ( ISelEnv* env, IRExpr* e ) |
| { |
| IRType ty = typeOfIRExpr(env->type_env,e); |
| vassert(ty == Ity_I32 || ty == Ity_I16 || ty == Ity_I8); |
| |
| /* special case: immediate */ |
| if (e->tag == Iex_Const) { |
| UInt u; |
| switch (e->Iex.Const.con->tag) { |
| case Ico_U32: u = e->Iex.Const.con->Ico.U32; break; |
| case Ico_U16: u = 0xFFFF & (e->Iex.Const.con->Ico.U16); break; |
| case Ico_U8: u = 0xFF & (e->Iex.Const.con->Ico.U8); break; |
| default: vpanic("iselIntExpr_RMI.Iex_Const(x86h)"); |
| } |
| return X86RMI_Imm(u); |
| } |
| |
| /* special case: 32-bit GET */ |
| if (e->tag == Iex_Get && ty == Ity_I32) { |
| return X86RMI_Mem(X86AMode_IR(e->Iex.Get.offset, |
| hregX86_EBP())); |
| } |
| |
| /* special case: 32-bit load from memory */ |
| if (e->tag == Iex_Load && ty == Ity_I32 && e->Iex.Load.end == Iend_LE) { |
| X86AMode* am = iselIntExpr_AMode(env, e->Iex.Load.addr); |
| return X86RMI_Mem(am); |
| } |
| |
| /* default case: calculate into a register and return that */ |
| { |
| HReg r = iselIntExpr_R ( env, e ); |
| return X86RMI_Reg(r); |
| } |
| } |
| |
| |
| /* --------------------- RIs --------------------- */ |
| |
| /* Calculate an expression into an X86RI operand. As with |
| iselIntExpr_R, the expression can have type 32, 16 or 8 bits. */ |
| |
| static X86RI* iselIntExpr_RI ( ISelEnv* env, IRExpr* e ) |
| { |
| X86RI* ri = iselIntExpr_RI_wrk(env, e); |
| /* sanity checks ... */ |
| switch (ri->tag) { |
| case Xri_Imm: |
| return ri; |
| case Xrmi_Reg: |
| vassert(hregClass(ri->Xri.Reg.reg) == HRcInt32); |
| vassert(hregIsVirtual(ri->Xri.Reg.reg)); |
| return ri; |
| default: |
| vpanic("iselIntExpr_RI: unknown x86 RI tag"); |
| } |
| } |
| |
| /* DO NOT CALL THIS DIRECTLY ! */ |
| static X86RI* iselIntExpr_RI_wrk ( ISelEnv* env, IRExpr* e ) |
| { |
| IRType ty = typeOfIRExpr(env->type_env,e); |
| vassert(ty == Ity_I32 || ty == Ity_I16 || ty == Ity_I8); |
| |
| /* special case: immediate */ |
| if (e->tag == Iex_Const) { |
| UInt u; |
| switch (e->Iex.Const.con->tag) { |
| case Ico_U32: u = e->Iex.Const.con->Ico.U32; break; |
| case Ico_U16: u = 0xFFFF & (e->Iex.Const.con->Ico.U16); break; |
| case Ico_U8: u = 0xFF & (e->Iex.Const.con->Ico.U8); break; |
| default: vpanic("iselIntExpr_RMI.Iex_Const(x86h)"); |
| } |
| return X86RI_Imm(u); |
| } |
| |
| /* default case: calculate into a register and return that */ |
| { |
| HReg r = iselIntExpr_R ( env, e ); |
| return X86RI_Reg(r); |
| } |
| } |
| |
| |
| /* --------------------- RMs --------------------- */ |
| |
| /* Similarly, calculate an expression into an X86RM operand. As with |
| iselIntExpr_R, the expression can have type 32, 16 or 8 bits. */ |
| |
| static X86RM* iselIntExpr_RM ( ISelEnv* env, IRExpr* e ) |
| { |
| X86RM* rm = iselIntExpr_RM_wrk(env, e); |
| /* sanity checks ... */ |
| switch (rm->tag) { |
| case Xrm_Reg: |
| vassert(hregClass(rm->Xrm.Reg.reg) == HRcInt32); |
| vassert(hregIsVirtual(rm->Xrm.Reg.reg)); |
| return rm; |
| case Xrm_Mem: |
| vassert(sane_AMode(rm->Xrm.Mem.am)); |
| return rm; |
| default: |
| vpanic("iselIntExpr_RM: unknown x86 RM tag"); |
| } |
| } |
| |
| /* DO NOT CALL THIS DIRECTLY ! */ |
| static X86RM* iselIntExpr_RM_wrk ( ISelEnv* env, IRExpr* e ) |
| { |
| IRType ty = typeOfIRExpr(env->type_env,e); |
| vassert(ty == Ity_I32 || ty == Ity_I16 || ty == Ity_I8); |
| |
| /* special case: 32-bit GET */ |
| if (e->tag == Iex_Get && ty == Ity_I32) { |
| return X86RM_Mem(X86AMode_IR(e->Iex.Get.offset, |
| hregX86_EBP())); |
| } |
| |
| /* special case: load from memory */ |
| |
| /* default case: calculate into a register and return that */ |
| { |
| HReg r = iselIntExpr_R ( env, e ); |
| return X86RM_Reg(r); |
| } |
| } |
| |
| |
| /* --------------------- CONDCODE --------------------- */ |
| |
| /* Generate code to evaluated a bit-typed expression, returning the |
| condition code which would correspond when the expression would |
| notionally have returned 1. */ |
| |
| static X86CondCode iselCondCode ( ISelEnv* env, IRExpr* e ) |
| { |
| /* Uh, there's nothing we can sanity check here, unfortunately. */ |
| return iselCondCode_wrk(env,e); |
| } |
| |
| /* DO NOT CALL THIS DIRECTLY ! */ |
| static X86CondCode iselCondCode_wrk ( ISelEnv* env, IRExpr* e ) |
| { |
| MatchInfo mi; |
| DECLARE_PATTERN(p_32to1); |
| DECLARE_PATTERN(p_1Uto32_then_32to1); |
| DECLARE_PATTERN(p_1Sto32_then_32to1); |
| |
| vassert(e); |
| vassert(typeOfIRExpr(env->type_env,e) == Ity_I1); |
| |
| /* var */ |
| if (e->tag == Iex_Tmp) { |
| HReg r32 = lookupIRTemp(env, e->Iex.Tmp.tmp); |
| /* Test32 doesn't modify r32; so this is OK. */ |
| addInstr(env, X86Instr_Test32(1,r32)); |
| return Xcc_NZ; |
| } |
| |
| /* Constant 1:Bit */ |
| if (e->tag == Iex_Const) { |
| HReg r; |
| vassert(e->Iex.Const.con->tag == Ico_U1); |
| vassert(e->Iex.Const.con->Ico.U1 == True |
| || e->Iex.Const.con->Ico.U1 == False); |
| r = newVRegI(env); |
| addInstr(env, X86Instr_Alu32R(Xalu_MOV,X86RMI_Imm(0),r)); |
| addInstr(env, X86Instr_Alu32R(Xalu_XOR,X86RMI_Reg(r),r)); |
| return e->Iex.Const.con->Ico.U1 ? Xcc_Z : Xcc_NZ; |
| } |
| |
| /* Not1(e) */ |
| if (e->tag == Iex_Unop && e->Iex.Unop.op == Iop_Not1) { |
| /* Generate code for the arg, and negate the test condition */ |
| return 1 ^ iselCondCode(env, e->Iex.Unop.arg); |
| } |
| |
| /* --- patterns rooted at: 32to1 --- */ |
| |
| /* 32to1(1Uto32(e)) ==> e */ |
| DEFINE_PATTERN(p_1Uto32_then_32to1, |
| unop(Iop_32to1,unop(Iop_1Uto32,bind(0)))); |
| if (matchIRExpr(&mi,p_1Uto32_then_32to1,e)) { |
| IRExpr* expr1 = mi.bindee[0]; |
| return iselCondCode(env, expr1); |
| } |
| |
| /* 32to1(1Sto32(e)) ==> e */ |
| DEFINE_PATTERN(p_1Sto32_then_32to1, |
| unop(Iop_32to1,unop(Iop_1Sto32,bind(0)))); |
| if (matchIRExpr(&mi,p_1Sto32_then_32to1,e)) { |
| IRExpr* expr1 = mi.bindee[0]; |
| return iselCondCode(env, expr1); |
| } |
| |
| /* 32to1(expr32) */ |
| DEFINE_PATTERN(p_32to1, |
| unop(Iop_32to1,bind(0)) |
| ); |
| if (matchIRExpr(&mi,p_32to1,e)) { |
| HReg r = iselIntExpr_R(env, mi.bindee[0]); |
| addInstr(env, X86Instr_Test32(1,r)); |
| return Xcc_NZ; |
| } |
| |
| /* --- patterns rooted at: CmpNEZ8 --- */ |
| |
| /* CmpNEZ8(x) */ |
| if (e->tag == Iex_Unop |
| && e->Iex.Unop.op == Iop_CmpNEZ8) { |
| HReg r = iselIntExpr_R(env, e->Iex.Unop.arg); |
| addInstr(env, X86Instr_Test32(0xFF,r)); |
| return Xcc_NZ; |
| } |
| |
| /* --- patterns rooted at: CmpNEZ16 --- */ |
| |
| /* CmpNEZ16(x) */ |
| if (e->tag == Iex_Unop |
| && e->Iex.Unop.op == Iop_CmpNEZ16) { |
| HReg r = iselIntExpr_R(env, e->Iex.Unop.arg); |
| addInstr(env, X86Instr_Test32(0xFFFF,r)); |
| return Xcc_NZ; |
| } |
| |
| /* --- patterns rooted at: CmpNEZ32 --- */ |
| |
| /* CmpNEZ32(1Sto32(b)) ==> b */ |
| { |
| DECLARE_PATTERN(p_CmpNEZ32_1Sto32); |
| DEFINE_PATTERN(p_CmpNEZ32_1Sto32, |
| unop(Iop_CmpNEZ32, unop(Iop_1Sto32,bind(0)))); |
| if (matchIRExpr(&mi, p_CmpNEZ32_1Sto32, e)) { |
| return iselCondCode(env, mi.bindee[0]); |
| } |
| } |
| |
| /* CmpNEZ32(And32(x,y)) */ |
| { |
| DECLARE_PATTERN(p_CmpNEZ32_And32); |
| DEFINE_PATTERN(p_CmpNEZ32_And32, |
| unop(Iop_CmpNEZ32, binop(Iop_And32, bind(0), bind(1)))); |
| if (matchIRExpr(&mi, p_CmpNEZ32_And32, e)) { |
| HReg r0 = iselIntExpr_R(env, mi.bindee[0]); |
| X86RMI* rmi1 = iselIntExpr_RMI(env, mi.bindee[1]); |
| HReg tmp = newVRegI(env); |
| addInstr(env, mk_iMOVsd_RR(r0, tmp)); |
| addInstr(env, X86Instr_Alu32R(Xalu_AND,rmi1,tmp)); |
| return Xcc_NZ; |
| } |
| } |
| |
| /* CmpNEZ32(Or32(x,y)) */ |
| { |
| DECLARE_PATTERN(p_CmpNEZ32_Or32); |
| DEFINE_PATTERN(p_CmpNEZ32_Or32, |
| unop(Iop_CmpNEZ32, binop(Iop_Or32, bind(0), bind(1)))); |
| if (matchIRExpr(&mi, p_CmpNEZ32_Or32, e)) { |
| HReg r0 = iselIntExpr_R(env, mi.bindee[0]); |
| X86RMI* rmi1 = iselIntExpr_RMI(env, mi.bindee[1]); |
| HReg tmp = newVRegI(env); |
| addInstr(env, mk_iMOVsd_RR(r0, tmp)); |
| addInstr(env, X86Instr_Alu32R(Xalu_OR,rmi1,tmp)); |
| return Xcc_NZ; |
| } |
| } |
| |
| /* CmpNEZ32(x) */ |
| if (e->tag == Iex_Unop |
| && e->Iex.Unop.op == Iop_CmpNEZ32) { |
| HReg r1 = iselIntExpr_R(env, e->Iex.Unop.arg); |
| X86RMI* rmi2 = X86RMI_Imm(0); |
| addInstr(env, X86Instr_Alu32R(Xalu_CMP,rmi2,r1)); |
| return Xcc_NZ; |
| } |
| |
| /* --- patterns rooted at: CmpNEZ64 --- */ |
| |
| /* CmpNEZ64(1Sto64(b)) ==> b */ |
| { |
| DECLARE_PATTERN(p_CmpNEZ64_1Sto64); |
| DEFINE_PATTERN( |
| p_CmpNEZ64_1Sto64, |
| unop(Iop_CmpNEZ64, unop(Iop_1Sto64,bind(0)))); |
| if (matchIRExpr(&mi, p_CmpNEZ64_1Sto64, e)) { |
| return iselCondCode(env, mi.bindee[0]); |
| } |
| } |
| |
| /* CmpNEZ64(Or64(x,y)) */ |
| { |
| DECLARE_PATTERN(p_CmpNEZ64_Or64); |
| DEFINE_PATTERN(p_CmpNEZ64_Or64, |
| unop(Iop_CmpNEZ64, binop(Iop_Or64, bind(0), bind(1)))); |
| if (matchIRExpr(&mi, p_CmpNEZ64_Or64, e)) { |
| HReg hi1, lo1, hi2, lo2; |
| HReg tmp = newVRegI(env); |
| iselInt64Expr( &hi1, &lo1, env, mi.bindee[0] ); |
| addInstr(env, mk_iMOVsd_RR(hi1, tmp)); |
| addInstr(env, X86Instr_Alu32R(Xalu_OR,X86RMI_Reg(lo1),tmp)); |
| iselInt64Expr( &hi2, &lo2, env, mi.bindee[1] ); |
| addInstr(env, X86Instr_Alu32R(Xalu_OR,X86RMI_Reg(hi2),tmp)); |
| addInstr(env, X86Instr_Alu32R(Xalu_OR,X86RMI_Reg(lo2),tmp)); |
| return Xcc_NZ; |
| } |
| } |
| |
| /* CmpNEZ64(x) */ |
| if (e->tag == Iex_Unop |
| && e->Iex.Unop.op == Iop_CmpNEZ64) { |
| HReg hi, lo; |
| HReg tmp = newVRegI(env); |
| iselInt64Expr( &hi, &lo, env, e->Iex.Unop.arg ); |
| addInstr(env, mk_iMOVsd_RR(hi, tmp)); |
| addInstr(env, X86Instr_Alu32R(Xalu_OR,X86RMI_Reg(lo), tmp)); |
| return Xcc_NZ; |
| } |
| |
| /* --- patterns rooted at: Cmp{EQ,NE}{8,16} --- */ |
| |
| /* CmpEQ8 / CmpNE8 */ |
| if (e->tag == Iex_Binop |
| && (e->Iex.Binop.op == Iop_CmpEQ8 |
| || e->Iex.Binop.op == Iop_CmpNE8)) { |
| HReg r1 = iselIntExpr_R(env, e->Iex.Binop.arg1); |
| X86RMI* rmi2 = iselIntExpr_RMI(env, e->Iex.Binop.arg2); |
| HReg r = newVRegI(env); |
| addInstr(env, mk_iMOVsd_RR(r1,r)); |
| addInstr(env, X86Instr_Alu32R(Xalu_XOR,rmi2,r)); |
| addInstr(env, X86Instr_Test32(0xFF,r)); |
| switch (e->Iex.Binop.op) { |
| case Iop_CmpEQ8: return Xcc_Z; |
| case Iop_CmpNE8: return Xcc_NZ; |
| default: vpanic("iselCondCode(x86): CmpXX8"); |
| } |
| } |
| |
| /* CmpEQ16 / CmpNE16 */ |
| if (e->tag == Iex_Binop |
| && (e->Iex.Binop.op == Iop_CmpEQ16 |
| || e->Iex.Binop.op == Iop_CmpNE16)) { |
| HReg r1 = iselIntExpr_R(env, e->Iex.Binop.arg1); |
| X86RMI* rmi2 = iselIntExpr_RMI(env, e->Iex.Binop.arg2); |
| HReg r = newVRegI(env); |
| addInstr(env, mk_iMOVsd_RR(r1,r)); |
| addInstr(env, X86Instr_Alu32R(Xalu_XOR,rmi2,r)); |
| addInstr(env, X86Instr_Test32(0xFFFF,r)); |
| switch (e->Iex.Binop.op) { |
| case Iop_CmpEQ16: return Xcc_Z; |
| case Iop_CmpNE16: return Xcc_NZ; |
| default: vpanic("iselCondCode(x86): CmpXX16"); |
| } |
| } |
| |
| /* Cmp*32*(x,y) */ |
| if (e->tag == Iex_Binop |
| && (e->Iex.Binop.op == Iop_CmpEQ32 |
| || e->Iex.Binop.op == Iop_CmpNE32 |
| || e->Iex.Binop.op == Iop_CmpLT32S |
| || e->Iex.Binop.op == Iop_CmpLT32U |
| || e->Iex.Binop.op == Iop_CmpLE32S |
| || e->Iex.Binop.op == Iop_CmpLE32U)) { |
| HReg r1 = iselIntExpr_R(env, e->Iex.Binop.arg1); |
| X86RMI* rmi2 = iselIntExpr_RMI(env, e->Iex.Binop.arg2); |
| addInstr(env, X86Instr_Alu32R(Xalu_CMP,rmi2,r1)); |
| switch (e->Iex.Binop.op) { |
| case Iop_CmpEQ32: return Xcc_Z; |
| case Iop_CmpNE32: return Xcc_NZ; |
| case Iop_CmpLT32S: return Xcc_L; |
| case Iop_CmpLT32U: return Xcc_B; |
| case Iop_CmpLE32S: return Xcc_LE; |
| case Iop_CmpLE32U: return Xcc_BE; |
| default: vpanic("iselCondCode(x86): CmpXX32"); |
| } |
| } |
| |
| /* CmpNE64 */ |
| if (e->tag == Iex_Binop |
| && (e->Iex.Binop.op == Iop_CmpNE64 |
| || e->Iex.Binop.op == Iop_CmpEQ64)) { |
| HReg hi1, hi2, lo1, lo2; |
| HReg tHi = newVRegI(env); |
| HReg tLo = newVRegI(env); |
| iselInt64Expr( &hi1, &lo1, env, e->Iex.Binop.arg1 ); |
| iselInt64Expr( &hi2, &lo2, env, e->Iex.Binop.arg2 ); |
| addInstr(env, mk_iMOVsd_RR(hi1, tHi)); |
| addInstr(env, X86Instr_Alu32R(Xalu_XOR,X86RMI_Reg(hi2), tHi)); |
| addInstr(env, mk_iMOVsd_RR(lo1, tLo)); |
| addInstr(env, X86Instr_Alu32R(Xalu_XOR,X86RMI_Reg(lo2), tLo)); |
| addInstr(env, X86Instr_Alu32R(Xalu_OR,X86RMI_Reg(tHi), tLo)); |
| switch (e->Iex.Binop.op) { |
| case Iop_CmpNE64: return Xcc_NZ; |
| case Iop_CmpEQ64: return Xcc_Z; |
| default: vpanic("iselCondCode(x86): CmpXX64"); |
| } |
| } |
| |
| ppIRExpr(e); |
| vpanic("iselCondCode"); |
| } |
| |
| |
| /*---------------------------------------------------------*/ |
| /*--- ISEL: Integer expressions (64 bit) ---*/ |
| /*---------------------------------------------------------*/ |
| |
| /* Compute a 64-bit value into a register pair, which is returned as |
| the first two parameters. As with iselIntExpr_R, these may be |
| either real or virtual regs; in any case they must not be changed |
| by subsequent code emitted by the caller. */ |
| |
| static void iselInt64Expr ( HReg* rHi, HReg* rLo, ISelEnv* env, IRExpr* e ) |
| { |
| iselInt64Expr_wrk(rHi, rLo, env, e); |
| # if 0 |
| vex_printf("\n"); ppIRExpr(e); vex_printf("\n"); |
| # endif |
| vassert(hregClass(*rHi) == HRcInt32); |
| vassert(hregIsVirtual(*rHi)); |
| vassert(hregClass(*rLo) == HRcInt32); |
| vassert(hregIsVirtual(*rLo)); |
| } |
| |
| /* DO NOT CALL THIS DIRECTLY ! */ |
| static void iselInt64Expr_wrk ( HReg* rHi, HReg* rLo, ISelEnv* env, IRExpr* e ) |
| { |
| HWord fn = 0; /* helper fn for most SIMD64 stuff */ |
| vassert(e); |
| vassert(typeOfIRExpr(env->type_env,e) == Ity_I64); |
| |
| /* 64-bit literal */ |
| if (e->tag == Iex_Const) { |
| ULong w64 = e->Iex.Const.con->Ico.U64; |
| UInt wHi = toUInt(w64 >> 32); |
| UInt wLo = toUInt(w64); |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| vassert(e->Iex.Const.con->tag == Ico_U64); |
| if (wLo == wHi) { |
| /* Save a precious Int register in this special case. */ |
| addInstr(env, X86Instr_Alu32R(Xalu_MOV, X86RMI_Imm(wLo), tLo)); |
| *rHi = tLo; |
| *rLo = tLo; |
| } else { |
| addInstr(env, X86Instr_Alu32R(Xalu_MOV, X86RMI_Imm(wHi), tHi)); |
| addInstr(env, X86Instr_Alu32R(Xalu_MOV, X86RMI_Imm(wLo), tLo)); |
| *rHi = tHi; |
| *rLo = tLo; |
| } |
| return; |
| } |
| |
| /* read 64-bit IRTemp */ |
| if (e->tag == Iex_Tmp) { |
| lookupIRTemp64( rHi, rLo, env, e->Iex.Tmp.tmp); |
| return; |
| } |
| |
| /* 64-bit load */ |
| if (e->tag == Iex_Load && e->Iex.Load.end == Iend_LE) { |
| HReg tLo, tHi; |
| X86AMode *am0, *am4; |
| vassert(e->Iex.Load.ty == Ity_I64); |
| tLo = newVRegI(env); |
| tHi = newVRegI(env); |
| am0 = iselIntExpr_AMode(env, e->Iex.Load.addr); |
| am4 = advance4(am0); |
| addInstr(env, X86Instr_Alu32R( Xalu_MOV, X86RMI_Mem(am0), tLo )); |
| addInstr(env, X86Instr_Alu32R( Xalu_MOV, X86RMI_Mem(am4), tHi )); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| /* 64-bit GET */ |
| if (e->tag == Iex_Get) { |
| X86AMode* am = X86AMode_IR(e->Iex.Get.offset, hregX86_EBP()); |
| X86AMode* am4 = advance4(am); |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| addInstr(env, X86Instr_Alu32R( Xalu_MOV, X86RMI_Mem(am), tLo )); |
| addInstr(env, X86Instr_Alu32R( Xalu_MOV, X86RMI_Mem(am4), tHi )); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| /* 64-bit GETI */ |
| if (e->tag == Iex_GetI) { |
| X86AMode* am |
| = genGuestArrayOffset( env, e->Iex.GetI.descr, |
| e->Iex.GetI.ix, e->Iex.GetI.bias ); |
| X86AMode* am4 = advance4(am); |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| addInstr(env, X86Instr_Alu32R( Xalu_MOV, X86RMI_Mem(am), tLo )); |
| addInstr(env, X86Instr_Alu32R( Xalu_MOV, X86RMI_Mem(am4), tHi )); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| /* 64-bit Mux0X */ |
| if (e->tag == Iex_Mux0X) { |
| HReg e0Lo, e0Hi, eXLo, eXHi, r8; |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| iselInt64Expr(&e0Hi, &e0Lo, env, e->Iex.Mux0X.expr0); |
| iselInt64Expr(&eXHi, &eXLo, env, e->Iex.Mux0X.exprX); |
| addInstr(env, mk_iMOVsd_RR(eXHi, tHi)); |
| addInstr(env, mk_iMOVsd_RR(eXLo, tLo)); |
| r8 = iselIntExpr_R(env, e->Iex.Mux0X.cond); |
| addInstr(env, X86Instr_Test32(0xFF, r8)); |
| /* This assumes the first cmov32 doesn't trash the condition |
| codes, so they are still available for the second cmov32 */ |
| addInstr(env, X86Instr_CMov32(Xcc_Z,X86RM_Reg(e0Hi),tHi)); |
| addInstr(env, X86Instr_CMov32(Xcc_Z,X86RM_Reg(e0Lo),tLo)); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| /* --------- BINARY ops --------- */ |
| if (e->tag == Iex_Binop) { |
| switch (e->Iex.Binop.op) { |
| /* 32 x 32 -> 64 multiply */ |
| case Iop_MullU32: |
| case Iop_MullS32: { |
| /* get one operand into %eax, and the other into a R/M. |
| Need to make an educated guess about which is better in |
| which. */ |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| Bool syned = toBool(e->Iex.Binop.op == Iop_MullS32); |
| X86RM* rmLeft = iselIntExpr_RM(env, e->Iex.Binop.arg1); |
| HReg rRight = iselIntExpr_R(env, e->Iex.Binop.arg2); |
| addInstr(env, mk_iMOVsd_RR(rRight, hregX86_EAX())); |
| addInstr(env, X86Instr_MulL(syned, rmLeft)); |
| /* Result is now in EDX:EAX. Tell the caller. */ |
| addInstr(env, mk_iMOVsd_RR(hregX86_EDX(), tHi)); |
| addInstr(env, mk_iMOVsd_RR(hregX86_EAX(), tLo)); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| /* 64 x 32 -> (32(rem),32(div)) division */ |
| case Iop_DivModU64to32: |
| case Iop_DivModS64to32: { |
| /* Get the 64-bit operand into edx:eax, and the other into |
| any old R/M. */ |
| HReg sHi, sLo; |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| Bool syned = toBool(e->Iex.Binop.op == Iop_DivModS64to32); |
| X86RM* rmRight = iselIntExpr_RM(env, e->Iex.Binop.arg2); |
| iselInt64Expr(&sHi,&sLo, env, e->Iex.Binop.arg1); |
| addInstr(env, mk_iMOVsd_RR(sHi, hregX86_EDX())); |
| addInstr(env, mk_iMOVsd_RR(sLo, hregX86_EAX())); |
| addInstr(env, X86Instr_Div(syned, rmRight)); |
| addInstr(env, mk_iMOVsd_RR(hregX86_EDX(), tHi)); |
| addInstr(env, mk_iMOVsd_RR(hregX86_EAX(), tLo)); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| /* Or64/And64/Xor64 */ |
| case Iop_Or64: |
| case Iop_And64: |
| case Iop_Xor64: { |
| HReg xLo, xHi, yLo, yHi; |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| X86AluOp op = e->Iex.Binop.op==Iop_Or64 ? Xalu_OR |
| : e->Iex.Binop.op==Iop_And64 ? Xalu_AND |
| : Xalu_XOR; |
| iselInt64Expr(&xHi, &xLo, env, e->Iex.Binop.arg1); |
| addInstr(env, mk_iMOVsd_RR(xHi, tHi)); |
| addInstr(env, mk_iMOVsd_RR(xLo, tLo)); |
| iselInt64Expr(&yHi, &yLo, env, e->Iex.Binop.arg2); |
| addInstr(env, X86Instr_Alu32R(op, X86RMI_Reg(yHi), tHi)); |
| addInstr(env, X86Instr_Alu32R(op, X86RMI_Reg(yLo), tLo)); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| /* Add64/Sub64 */ |
| case Iop_Add64: |
| case Iop_Sub64: { |
| HReg xLo, xHi, yLo, yHi; |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| iselInt64Expr(&xHi, &xLo, env, e->Iex.Binop.arg1); |
| addInstr(env, mk_iMOVsd_RR(xHi, tHi)); |
| addInstr(env, mk_iMOVsd_RR(xLo, tLo)); |
| iselInt64Expr(&yHi, &yLo, env, e->Iex.Binop.arg2); |
| if (e->Iex.Binop.op==Iop_Add64) { |
| addInstr(env, X86Instr_Alu32R(Xalu_ADD, X86RMI_Reg(yLo), tLo)); |
| addInstr(env, X86Instr_Alu32R(Xalu_ADC, X86RMI_Reg(yHi), tHi)); |
| } else { |
| addInstr(env, X86Instr_Alu32R(Xalu_SUB, X86RMI_Reg(yLo), tLo)); |
| addInstr(env, X86Instr_Alu32R(Xalu_SBB, X86RMI_Reg(yHi), tHi)); |
| } |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| /* 32HLto64(e1,e2) */ |
| case Iop_32HLto64: |
| *rHi = iselIntExpr_R(env, e->Iex.Binop.arg1); |
| *rLo = iselIntExpr_R(env, e->Iex.Binop.arg2); |
| return; |
| |
| /* 64-bit shifts */ |
| case Iop_Shl64: { |
| /* We use the same ingenious scheme as gcc. Put the value |
| to be shifted into %hi:%lo, and the shift amount into |
| %cl. Then (dsts on right, a la ATT syntax): |
| |
| shldl %cl, %lo, %hi -- make %hi be right for the |
| -- shift amt %cl % 32 |
| shll %cl, %lo -- make %lo be right for the |
| -- shift amt %cl % 32 |
| |
| Now, if (shift amount % 64) is in the range 32 .. 63, |
| we have to do a fixup, which puts the result low half |
| into the result high half, and zeroes the low half: |
| |
| testl $32, %ecx |
| |
| cmovnz %lo, %hi |
| movl $0, %tmp -- sigh; need yet another reg |
| cmovnz %tmp, %lo |
| */ |
| HReg rAmt, sHi, sLo, tHi, tLo, tTemp; |
| tLo = newVRegI(env); |
| tHi = newVRegI(env); |
| tTemp = newVRegI(env); |
| rAmt = iselIntExpr_R(env, e->Iex.Binop.arg2); |
| iselInt64Expr(&sHi,&sLo, env, e->Iex.Binop.arg1); |
| addInstr(env, mk_iMOVsd_RR(rAmt, hregX86_ECX())); |
| addInstr(env, mk_iMOVsd_RR(sHi, tHi)); |
| addInstr(env, mk_iMOVsd_RR(sLo, tLo)); |
| /* Ok. Now shift amt is in %ecx, and value is in tHi/tLo |
| and those regs are legitimately modifiable. */ |
| addInstr(env, X86Instr_Sh3232(Xsh_SHL, 0/*%cl*/, tLo, tHi)); |
| addInstr(env, X86Instr_Sh32(Xsh_SHL, 0/*%cl*/, tLo)); |
| addInstr(env, X86Instr_Test32(32, hregX86_ECX())); |
| addInstr(env, X86Instr_CMov32(Xcc_NZ, X86RM_Reg(tLo), tHi)); |
| addInstr(env, X86Instr_Alu32R(Xalu_MOV, X86RMI_Imm(0), tTemp)); |
| addInstr(env, X86Instr_CMov32(Xcc_NZ, X86RM_Reg(tTemp), tLo)); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| case Iop_Shr64: { |
| /* We use the same ingenious scheme as gcc. Put the value |
| to be shifted into %hi:%lo, and the shift amount into |
| %cl. Then: |
| |
| shrdl %cl, %hi, %lo -- make %lo be right for the |
| -- shift amt %cl % 32 |
| shrl %cl, %hi -- make %hi be right for the |
| -- shift amt %cl % 32 |
| |
| Now, if (shift amount % 64) is in the range 32 .. 63, |
| we have to do a fixup, which puts the result high half |
| into the result low half, and zeroes the high half: |
| |
| testl $32, %ecx |
| |
| cmovnz %hi, %lo |
| movl $0, %tmp -- sigh; need yet another reg |
| cmovnz %tmp, %hi |
| */ |
| HReg rAmt, sHi, sLo, tHi, tLo, tTemp; |
| tLo = newVRegI(env); |
| tHi = newVRegI(env); |
| tTemp = newVRegI(env); |
| rAmt = iselIntExpr_R(env, e->Iex.Binop.arg2); |
| iselInt64Expr(&sHi,&sLo, env, e->Iex.Binop.arg1); |
| addInstr(env, mk_iMOVsd_RR(rAmt, hregX86_ECX())); |
| addInstr(env, mk_iMOVsd_RR(sHi, tHi)); |
| addInstr(env, mk_iMOVsd_RR(sLo, tLo)); |
| /* Ok. Now shift amt is in %ecx, and value is in tHi/tLo |
| and those regs are legitimately modifiable. */ |
| addInstr(env, X86Instr_Sh3232(Xsh_SHR, 0/*%cl*/, tHi, tLo)); |
| addInstr(env, X86Instr_Sh32(Xsh_SHR, 0/*%cl*/, tHi)); |
| addInstr(env, X86Instr_Test32(32, hregX86_ECX())); |
| addInstr(env, X86Instr_CMov32(Xcc_NZ, X86RM_Reg(tHi), tLo)); |
| addInstr(env, X86Instr_Alu32R(Xalu_MOV, X86RMI_Imm(0), tTemp)); |
| addInstr(env, X86Instr_CMov32(Xcc_NZ, X86RM_Reg(tTemp), tHi)); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| /* F64 -> I64 */ |
| /* Sigh, this is an almost exact copy of the F64 -> I32/I16 |
| case. Unfortunately I see no easy way to avoid the |
| duplication. */ |
| case Iop_F64toI64: { |
| HReg rf = iselDblExpr(env, e->Iex.Binop.arg2); |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| |
| /* Used several times ... */ |
| /* Careful ... this sharing is only safe because |
| zero_esp/four_esp do not hold any registers which the |
| register allocator could attempt to swizzle later. */ |
| X86AMode* zero_esp = X86AMode_IR(0, hregX86_ESP()); |
| X86AMode* four_esp = X86AMode_IR(4, hregX86_ESP()); |
| |
| /* rf now holds the value to be converted, and rrm holds |
| the rounding mode value, encoded as per the |
| IRRoundingMode enum. The first thing to do is set the |
| FPU's rounding mode accordingly. */ |
| |
| /* Create a space for the format conversion. */ |
| /* subl $8, %esp */ |
| sub_from_esp(env, 8); |
| |
| /* Set host rounding mode */ |
| set_FPU_rounding_mode( env, e->Iex.Binop.arg1 ); |
| |
| /* gistll %rf, 0(%esp) */ |
| addInstr(env, X86Instr_FpLdStI(False/*store*/, 8, rf, zero_esp)); |
| |
| /* movl 0(%esp), %dstLo */ |
| /* movl 4(%esp), %dstHi */ |
| addInstr(env, X86Instr_Alu32R( |
| Xalu_MOV, X86RMI_Mem(zero_esp), tLo)); |
| addInstr(env, X86Instr_Alu32R( |
| Xalu_MOV, X86RMI_Mem(four_esp), tHi)); |
| |
| /* Restore default FPU rounding. */ |
| set_FPU_rounding_default( env ); |
| |
| /* addl $8, %esp */ |
| add_to_esp(env, 8); |
| |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| case Iop_Add8x8: |
| fn = (HWord)h_generic_calc_Add8x8; goto binnish; |
| case Iop_Add16x4: |
| fn = (HWord)h_generic_calc_Add16x4; goto binnish; |
| case Iop_Add32x2: |
| fn = (HWord)h_generic_calc_Add32x2; goto binnish; |
| |
| case Iop_Avg8Ux8: |
| fn = (HWord)h_generic_calc_Avg8Ux8; goto binnish; |
| case Iop_Avg16Ux4: |
| fn = (HWord)h_generic_calc_Avg16Ux4; goto binnish; |
| |
| case Iop_CmpEQ8x8: |
| fn = (HWord)h_generic_calc_CmpEQ8x8; goto binnish; |
| case Iop_CmpEQ16x4: |
| fn = (HWord)h_generic_calc_CmpEQ16x4; goto binnish; |
| case Iop_CmpEQ32x2: |
| fn = (HWord)h_generic_calc_CmpEQ32x2; goto binnish; |
| |
| case Iop_CmpGT8Sx8: |
| fn = (HWord)h_generic_calc_CmpGT8Sx8; goto binnish; |
| case Iop_CmpGT16Sx4: |
| fn = (HWord)h_generic_calc_CmpGT16Sx4; goto binnish; |
| case Iop_CmpGT32Sx2: |
| fn = (HWord)h_generic_calc_CmpGT32Sx2; goto binnish; |
| |
| case Iop_InterleaveHI8x8: |
| fn = (HWord)h_generic_calc_InterleaveHI8x8; goto binnish; |
| case Iop_InterleaveLO8x8: |
| fn = (HWord)h_generic_calc_InterleaveLO8x8; goto binnish; |
| case Iop_InterleaveHI16x4: |
| fn = (HWord)h_generic_calc_InterleaveHI16x4; goto binnish; |
| case Iop_InterleaveLO16x4: |
| fn = (HWord)h_generic_calc_InterleaveLO16x4; goto binnish; |
| case Iop_InterleaveHI32x2: |
| fn = (HWord)h_generic_calc_InterleaveHI32x2; goto binnish; |
| case Iop_InterleaveLO32x2: |
| fn = (HWord)h_generic_calc_InterleaveLO32x2; goto binnish; |
| |
| case Iop_Max8Ux8: |
| fn = (HWord)h_generic_calc_Max8Ux8; goto binnish; |
| case Iop_Max16Sx4: |
| fn = (HWord)h_generic_calc_Max16Sx4; goto binnish; |
| case Iop_Min8Ux8: |
| fn = (HWord)h_generic_calc_Min8Ux8; goto binnish; |
| case Iop_Min16Sx4: |
| fn = (HWord)h_generic_calc_Min16Sx4; goto binnish; |
| |
| case Iop_Mul16x4: |
| fn = (HWord)h_generic_calc_Mul16x4; goto binnish; |
| case Iop_MulHi16Sx4: |
| fn = (HWord)h_generic_calc_MulHi16Sx4; goto binnish; |
| case Iop_MulHi16Ux4: |
| fn = (HWord)h_generic_calc_MulHi16Ux4; goto binnish; |
| |
| case Iop_QAdd8Sx8: |
| fn = (HWord)h_generic_calc_QAdd8Sx8; goto binnish; |
| case Iop_QAdd16Sx4: |
| fn = (HWord)h_generic_calc_QAdd16Sx4; goto binnish; |
| case Iop_QAdd8Ux8: |
| fn = (HWord)h_generic_calc_QAdd8Ux8; goto binnish; |
| case Iop_QAdd16Ux4: |
| fn = (HWord)h_generic_calc_QAdd16Ux4; goto binnish; |
| |
| case Iop_QNarrow32Sx2: |
| fn = (HWord)h_generic_calc_QNarrow32Sx2; goto binnish; |
| case Iop_QNarrow16Sx4: |
| fn = (HWord)h_generic_calc_QNarrow16Sx4; goto binnish; |
| case Iop_QNarrow16Ux4: |
| fn = (HWord)h_generic_calc_QNarrow16Ux4; goto binnish; |
| |
| case Iop_QSub8Sx8: |
| fn = (HWord)h_generic_calc_QSub8Sx8; goto binnish; |
| case Iop_QSub16Sx4: |
| fn = (HWord)h_generic_calc_QSub16Sx4; goto binnish; |
| case Iop_QSub8Ux8: |
| fn = (HWord)h_generic_calc_QSub8Ux8; goto binnish; |
| case Iop_QSub16Ux4: |
| fn = (HWord)h_generic_calc_QSub16Ux4; goto binnish; |
| |
| case Iop_Sub8x8: |
| fn = (HWord)h_generic_calc_Sub8x8; goto binnish; |
| case Iop_Sub16x4: |
| fn = (HWord)h_generic_calc_Sub16x4; goto binnish; |
| case Iop_Sub32x2: |
| fn = (HWord)h_generic_calc_Sub32x2; goto binnish; |
| |
| binnish: { |
| /* Note: the following assumes all helpers are of |
| signature |
| ULong fn ( ULong, ULong ), and they are |
| not marked as regparm functions. |
| */ |
| HReg xLo, xHi, yLo, yHi; |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| iselInt64Expr(&yHi, &yLo, env, e->Iex.Binop.arg2); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(yHi))); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(yLo))); |
| iselInt64Expr(&xHi, &xLo, env, e->Iex.Binop.arg1); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(xHi))); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(xLo))); |
| addInstr(env, X86Instr_Call( Xcc_ALWAYS, (UInt)fn, 0 )); |
| add_to_esp(env, 4*4); |
| addInstr(env, mk_iMOVsd_RR(hregX86_EDX(), tHi)); |
| addInstr(env, mk_iMOVsd_RR(hregX86_EAX(), tLo)); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| case Iop_ShlN32x2: |
| fn = (HWord)h_generic_calc_ShlN32x2; goto shifty; |
| case Iop_ShlN16x4: |
| fn = (HWord)h_generic_calc_ShlN16x4; goto shifty; |
| case Iop_ShrN32x2: |
| fn = (HWord)h_generic_calc_ShrN32x2; goto shifty; |
| case Iop_ShrN16x4: |
| fn = (HWord)h_generic_calc_ShrN16x4; goto shifty; |
| case Iop_SarN32x2: |
| fn = (HWord)h_generic_calc_SarN32x2; goto shifty; |
| case Iop_SarN16x4: |
| fn = (HWord)h_generic_calc_SarN16x4; goto shifty; |
| shifty: { |
| /* Note: the following assumes all helpers are of |
| signature |
| ULong fn ( ULong, UInt ), and they are |
| not marked as regparm functions. |
| */ |
| HReg xLo, xHi; |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| X86RMI* y = iselIntExpr_RMI(env, e->Iex.Binop.arg2); |
| addInstr(env, X86Instr_Push(y)); |
| iselInt64Expr(&xHi, &xLo, env, e->Iex.Binop.arg1); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(xHi))); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(xLo))); |
| addInstr(env, X86Instr_Call( Xcc_ALWAYS, (UInt)fn, 0 )); |
| add_to_esp(env, 3*4); |
| addInstr(env, mk_iMOVsd_RR(hregX86_EDX(), tHi)); |
| addInstr(env, mk_iMOVsd_RR(hregX86_EAX(), tLo)); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| default: |
| break; |
| } |
| } /* if (e->tag == Iex_Binop) */ |
| |
| |
| /* --------- UNARY ops --------- */ |
| if (e->tag == Iex_Unop) { |
| switch (e->Iex.Unop.op) { |
| |
| /* 32Sto64(e) */ |
| case Iop_32Sto64: { |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| HReg src = iselIntExpr_R(env, e->Iex.Unop.arg); |
| addInstr(env, mk_iMOVsd_RR(src,tHi)); |
| addInstr(env, mk_iMOVsd_RR(src,tLo)); |
| addInstr(env, X86Instr_Sh32(Xsh_SAR, 31, tHi)); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| /* 32Uto64(e) */ |
| case Iop_32Uto64: { |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| HReg src = iselIntExpr_R(env, e->Iex.Unop.arg); |
| addInstr(env, mk_iMOVsd_RR(src,tLo)); |
| addInstr(env, X86Instr_Alu32R(Xalu_MOV, X86RMI_Imm(0), tHi)); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| /* V128{HI}to64 */ |
| case Iop_V128HIto64: |
| case Iop_V128to64: { |
| Int off = e->Iex.Unop.op==Iop_V128HIto64 ? 8 : 0; |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| HReg vec = iselVecExpr(env, e->Iex.Unop.arg); |
| X86AMode* esp0 = X86AMode_IR(0, hregX86_ESP()); |
| X86AMode* espLO = X86AMode_IR(off, hregX86_ESP()); |
| X86AMode* espHI = X86AMode_IR(off+4, hregX86_ESP()); |
| sub_from_esp(env, 16); |
| addInstr(env, X86Instr_SseLdSt(False/*store*/, vec, esp0)); |
| addInstr(env, X86Instr_Alu32R( Xalu_MOV, |
| X86RMI_Mem(espLO), tLo )); |
| addInstr(env, X86Instr_Alu32R( Xalu_MOV, |
| X86RMI_Mem(espHI), tHi )); |
| add_to_esp(env, 16); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| /* could do better than this, but for now ... */ |
| case Iop_1Sto64: { |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| X86CondCode cond = iselCondCode(env, e->Iex.Unop.arg); |
| addInstr(env, X86Instr_Set32(cond,tLo)); |
| addInstr(env, X86Instr_Sh32(Xsh_SHL, 31, tLo)); |
| addInstr(env, X86Instr_Sh32(Xsh_SAR, 31, tLo)); |
| addInstr(env, mk_iMOVsd_RR(tLo, tHi)); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| /* Not64(e) */ |
| case Iop_Not64: { |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| HReg sHi, sLo; |
| iselInt64Expr(&sHi, &sLo, env, e->Iex.Unop.arg); |
| addInstr(env, mk_iMOVsd_RR(sHi, tHi)); |
| addInstr(env, mk_iMOVsd_RR(sLo, tLo)); |
| addInstr(env, X86Instr_Unary32(Xun_NOT,tHi)); |
| addInstr(env, X86Instr_Unary32(Xun_NOT,tLo)); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| /* Neg64(e) */ |
| case Iop_Neg64: { |
| HReg yLo, yHi; |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| /* yHi:yLo = arg */ |
| iselInt64Expr(&yHi, &yLo, env, e->Iex.Unop.arg); |
| /* tLo = 0 - yLo, and set carry */ |
| addInstr(env, X86Instr_Alu32R(Xalu_MOV, X86RMI_Imm(0), tLo)); |
| addInstr(env, X86Instr_Alu32R(Xalu_SUB, X86RMI_Reg(yLo), tLo)); |
| /* tHi = 0 - yHi - carry */ |
| addInstr(env, X86Instr_Alu32R(Xalu_MOV, X86RMI_Imm(0), tHi)); |
| addInstr(env, X86Instr_Alu32R(Xalu_SBB, X86RMI_Reg(yHi), tHi)); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| /* ReinterpF64asI64(e) */ |
| /* Given an IEEE754 double, produce an I64 with the same bit |
| pattern. */ |
| case Iop_ReinterpF64asI64: { |
| HReg rf = iselDblExpr(env, e->Iex.Unop.arg); |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| X86AMode* zero_esp = X86AMode_IR(0, hregX86_ESP()); |
| X86AMode* four_esp = X86AMode_IR(4, hregX86_ESP()); |
| /* paranoia */ |
| set_FPU_rounding_default(env); |
| /* subl $8, %esp */ |
| sub_from_esp(env, 8); |
| /* gstD %rf, 0(%esp) */ |
| addInstr(env, |
| X86Instr_FpLdSt(False/*store*/, 8, rf, zero_esp)); |
| /* movl 0(%esp), %tLo */ |
| addInstr(env, |
| X86Instr_Alu32R(Xalu_MOV, X86RMI_Mem(zero_esp), tLo)); |
| /* movl 4(%esp), %tHi */ |
| addInstr(env, |
| X86Instr_Alu32R(Xalu_MOV, X86RMI_Mem(four_esp), tHi)); |
| /* addl $8, %esp */ |
| add_to_esp(env, 8); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| case Iop_CmpNEZ32x2: |
| fn = (HWord)h_generic_calc_CmpNEZ32x2; goto unish; |
| case Iop_CmpNEZ16x4: |
| fn = (HWord)h_generic_calc_CmpNEZ16x4; goto unish; |
| case Iop_CmpNEZ8x8: |
| fn = (HWord)h_generic_calc_CmpNEZ8x8; goto unish; |
| unish: { |
| /* Note: the following assumes all helpers are of |
| signature |
| ULong fn ( ULong ), and they are |
| not marked as regparm functions. |
| */ |
| HReg xLo, xHi; |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| iselInt64Expr(&xHi, &xLo, env, e->Iex.Unop.arg); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(xHi))); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(xLo))); |
| addInstr(env, X86Instr_Call( Xcc_ALWAYS, (UInt)fn, 0 )); |
| add_to_esp(env, 2*4); |
| addInstr(env, mk_iMOVsd_RR(hregX86_EDX(), tHi)); |
| addInstr(env, mk_iMOVsd_RR(hregX86_EAX(), tLo)); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| default: |
| break; |
| } |
| } /* if (e->tag == Iex_Unop) */ |
| |
| |
| /* --------- CCALL --------- */ |
| if (e->tag == Iex_CCall) { |
| HReg tLo = newVRegI(env); |
| HReg tHi = newVRegI(env); |
| |
| /* Marshal args, do the call, clear stack. */ |
| doHelperCall( env, False, NULL, e->Iex.CCall.cee, e->Iex.CCall.args ); |
| |
| addInstr(env, mk_iMOVsd_RR(hregX86_EDX(), tHi)); |
| addInstr(env, mk_iMOVsd_RR(hregX86_EAX(), tLo)); |
| *rHi = tHi; |
| *rLo = tLo; |
| return; |
| } |
| |
| ppIRExpr(e); |
| vpanic("iselInt64Expr"); |
| } |
| |
| |
| /*---------------------------------------------------------*/ |
| /*--- ISEL: Floating point expressions (32 bit) ---*/ |
| /*---------------------------------------------------------*/ |
| |
| /* Nothing interesting here; really just wrappers for |
| 64-bit stuff. */ |
| |
| static HReg iselFltExpr ( ISelEnv* env, IRExpr* e ) |
| { |
| HReg r = iselFltExpr_wrk( env, e ); |
| # if 0 |
| vex_printf("\n"); ppIRExpr(e); vex_printf("\n"); |
| # endif |
| vassert(hregClass(r) == HRcFlt64); /* yes, really Flt64 */ |
| vassert(hregIsVirtual(r)); |
| return r; |
| } |
| |
| /* DO NOT CALL THIS DIRECTLY */ |
| static HReg iselFltExpr_wrk ( ISelEnv* env, IRExpr* e ) |
| { |
| IRType ty = typeOfIRExpr(env->type_env,e); |
| vassert(ty == Ity_F32); |
| |
| if (e->tag == Iex_Tmp) { |
| return lookupIRTemp(env, e->Iex.Tmp.tmp); |
| } |
| |
| if (e->tag == Iex_Load && e->Iex.Load.end == Iend_LE) { |
| X86AMode* am; |
| HReg res = newVRegF(env); |
| vassert(e->Iex.Load.ty == Ity_F32); |
| am = iselIntExpr_AMode(env, e->Iex.Load.addr); |
| addInstr(env, X86Instr_FpLdSt(True/*load*/, 4, res, am)); |
| return res; |
| } |
| |
| if (e->tag == Iex_Binop |
| && e->Iex.Binop.op == Iop_F64toF32) { |
| /* Although the result is still held in a standard FPU register, |
| we need to round it to reflect the loss of accuracy/range |
| entailed in casting it to a 32-bit float. */ |
| HReg dst = newVRegF(env); |
| HReg src = iselDblExpr(env, e->Iex.Binop.arg2); |
| set_FPU_rounding_mode( env, e->Iex.Binop.arg1 ); |
| addInstr(env, X86Instr_Fp64to32(src,dst)); |
| set_FPU_rounding_default( env ); |
| return dst; |
| } |
| |
| if (e->tag == Iex_Get) { |
| X86AMode* am = X86AMode_IR( e->Iex.Get.offset, |
| hregX86_EBP() ); |
| HReg res = newVRegF(env); |
| addInstr(env, X86Instr_FpLdSt( True/*load*/, 4, res, am )); |
| return res; |
| } |
| |
| if (e->tag == Iex_Unop |
| && e->Iex.Unop.op == Iop_ReinterpI32asF32) { |
| /* Given an I32, produce an IEEE754 float with the same bit |
| pattern. */ |
| HReg dst = newVRegF(env); |
| X86RMI* rmi = iselIntExpr_RMI(env, e->Iex.Unop.arg); |
| /* paranoia */ |
| addInstr(env, X86Instr_Push(rmi)); |
| addInstr(env, X86Instr_FpLdSt( |
| True/*load*/, 4, dst, |
| X86AMode_IR(0, hregX86_ESP()))); |
| add_to_esp(env, 4); |
| return dst; |
| } |
| |
| ppIRExpr(e); |
| vpanic("iselFltExpr_wrk"); |
| } |
| |
| |
| /*---------------------------------------------------------*/ |
| /*--- ISEL: Floating point expressions (64 bit) ---*/ |
| /*---------------------------------------------------------*/ |
| |
| /* Compute a 64-bit floating point value into a register, the identity |
| of which is returned. As with iselIntExpr_R, the reg may be either |
| real or virtual; in any case it must not be changed by subsequent |
| code emitted by the caller. */ |
| |
| /* IEEE 754 formats. From http://www.freesoft.org/CIE/RFC/1832/32.htm: |
| |
| Type S (1 bit) E (11 bits) F (52 bits) |
| ---- --------- ----------- ----------- |
| signalling NaN u 2047 (max) .0uuuuu---u |
| (with at least |
| one 1 bit) |
| quiet NaN u 2047 (max) .1uuuuu---u |
| |
| negative infinity 1 2047 (max) .000000---0 |
| |
| positive infinity 0 2047 (max) .000000---0 |
| |
| negative zero 1 0 .000000---0 |
| |
| positive zero 0 0 .000000---0 |
| */ |
| |
| static HReg iselDblExpr ( ISelEnv* env, IRExpr* e ) |
| { |
| HReg r = iselDblExpr_wrk( env, e ); |
| # if 0 |
| vex_printf("\n"); ppIRExpr(e); vex_printf("\n"); |
| # endif |
| vassert(hregClass(r) == HRcFlt64); |
| vassert(hregIsVirtual(r)); |
| return r; |
| } |
| |
| /* DO NOT CALL THIS DIRECTLY */ |
| static HReg iselDblExpr_wrk ( ISelEnv* env, IRExpr* e ) |
| { |
| IRType ty = typeOfIRExpr(env->type_env,e); |
| vassert(e); |
| vassert(ty == Ity_F64); |
| |
| if (e->tag == Iex_Tmp) { |
| return lookupIRTemp(env, e->Iex.Tmp.tmp); |
| } |
| |
| if (e->tag == Iex_Const) { |
| union { UInt u32x2[2]; ULong u64; Double f64; } u; |
| HReg freg = newVRegF(env); |
| vassert(sizeof(u) == 8); |
| vassert(sizeof(u.u64) == 8); |
| vassert(sizeof(u.f64) == 8); |
| vassert(sizeof(u.u32x2) == 8); |
| |
| if (e->Iex.Const.con->tag == Ico_F64) { |
| u.f64 = e->Iex.Const.con->Ico.F64; |
| } |
| else if (e->Iex.Const.con->tag == Ico_F64i) { |
| u.u64 = e->Iex.Const.con->Ico.F64i; |
| } |
| else |
| vpanic("iselDblExpr(x86): const"); |
| |
| addInstr(env, X86Instr_Push(X86RMI_Imm(u.u32x2[1]))); |
| addInstr(env, X86Instr_Push(X86RMI_Imm(u.u32x2[0]))); |
| addInstr(env, X86Instr_FpLdSt(True/*load*/, 8, freg, |
| X86AMode_IR(0, hregX86_ESP()))); |
| add_to_esp(env, 8); |
| return freg; |
| } |
| |
| if (e->tag == Iex_Load && e->Iex.Load.end == Iend_LE) { |
| X86AMode* am; |
| HReg res = newVRegF(env); |
| vassert(e->Iex.Load.ty == Ity_F64); |
| am = iselIntExpr_AMode(env, e->Iex.Load.addr); |
| addInstr(env, X86Instr_FpLdSt(True/*load*/, 8, res, am)); |
| return res; |
| } |
| |
| if (e->tag == Iex_Get) { |
| X86AMode* am = X86AMode_IR( e->Iex.Get.offset, |
| hregX86_EBP() ); |
| HReg res = newVRegF(env); |
| addInstr(env, X86Instr_FpLdSt( True/*load*/, 8, res, am )); |
| return res; |
| } |
| |
| if (e->tag == Iex_GetI) { |
| X86AMode* am |
| = genGuestArrayOffset( |
| env, e->Iex.GetI.descr, |
| e->Iex.GetI.ix, e->Iex.GetI.bias ); |
| HReg res = newVRegF(env); |
| addInstr(env, X86Instr_FpLdSt( True/*load*/, 8, res, am )); |
| return res; |
| } |
| |
| if (e->tag == Iex_Triop) { |
| X86FpOp fpop = Xfp_INVALID; |
| switch (e->Iex.Triop.op) { |
| case Iop_AddF64: fpop = Xfp_ADD; break; |
| case Iop_SubF64: fpop = Xfp_SUB; break; |
| case Iop_MulF64: fpop = Xfp_MUL; break; |
| case Iop_DivF64: fpop = Xfp_DIV; break; |
| case Iop_ScaleF64: fpop = Xfp_SCALE; break; |
| case Iop_Yl2xF64: fpop = Xfp_YL2X; break; |
| case Iop_Yl2xp1F64: fpop = Xfp_YL2XP1; break; |
| case Iop_AtanF64: fpop = Xfp_ATAN; break; |
| case Iop_PRemF64: fpop = Xfp_PREM; break; |
| case Iop_PRem1F64: fpop = Xfp_PREM1; break; |
| default: break; |
| } |
| if (fpop != Xfp_INVALID) { |
| HReg res = newVRegF(env); |
| HReg srcL = iselDblExpr(env, e->Iex.Triop.arg2); |
| HReg srcR = iselDblExpr(env, e->Iex.Triop.arg3); |
| /* XXXROUNDINGFIXME */ |
| /* set roundingmode here */ |
| addInstr(env, X86Instr_FpBinary(fpop,srcL,srcR,res)); |
| if (fpop != Xfp_ADD && fpop != Xfp_SUB |
| && fpop != Xfp_MUL && fpop != Xfp_DIV) |
| roundToF64(env, res); |
| return res; |
| } |
| } |
| |
| if (e->tag == Iex_Binop && e->Iex.Binop.op == Iop_RoundF64toInt) { |
| HReg rf = iselDblExpr(env, e->Iex.Binop.arg2); |
| HReg dst = newVRegF(env); |
| |
| /* rf now holds the value to be rounded. The first thing to do |
| is set the FPU's rounding mode accordingly. */ |
| |
| /* Set host rounding mode */ |
| set_FPU_rounding_mode( env, e->Iex.Binop.arg1 ); |
| |
| /* grndint %rf, %dst */ |
| addInstr(env, X86Instr_FpUnary(Xfp_ROUND, rf, dst)); |
| |
| /* Restore default FPU rounding. */ |
| set_FPU_rounding_default( env ); |
| |
| return dst; |
| } |
| |
| if (e->tag == Iex_Binop && e->Iex.Binop.op == Iop_I64toF64) { |
| HReg dst = newVRegF(env); |
| HReg rHi,rLo; |
| iselInt64Expr( &rHi, &rLo, env, e->Iex.Binop.arg2); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(rHi))); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(rLo))); |
| |
| /* Set host rounding mode */ |
| set_FPU_rounding_mode( env, e->Iex.Binop.arg1 ); |
| |
| addInstr(env, X86Instr_FpLdStI( |
| True/*load*/, 8, dst, |
| X86AMode_IR(0, hregX86_ESP()))); |
| |
| /* Restore default FPU rounding. */ |
| set_FPU_rounding_default( env ); |
| |
| add_to_esp(env, 8); |
| return dst; |
| } |
| |
| if (e->tag == Iex_Binop) { |
| X86FpOp fpop = Xfp_INVALID; |
| switch (e->Iex.Binop.op) { |
| case Iop_SinF64: fpop = Xfp_SIN; break; |
| case Iop_CosF64: fpop = Xfp_COS; break; |
| case Iop_TanF64: fpop = Xfp_TAN; break; |
| case Iop_2xm1F64: fpop = Xfp_2XM1; break; |
| case Iop_SqrtF64: fpop = Xfp_SQRT; break; |
| default: break; |
| } |
| if (fpop != Xfp_INVALID) { |
| HReg res = newVRegF(env); |
| HReg src = iselDblExpr(env, e->Iex.Binop.arg2); |
| /* XXXROUNDINGFIXME */ |
| /* set roundingmode here */ |
| addInstr(env, X86Instr_FpUnary(fpop,src,res)); |
| if (fpop != Xfp_SQRT |
| && fpop != Xfp_NEG && fpop != Xfp_ABS) |
| roundToF64(env, res); |
| return res; |
| } |
| } |
| |
| if (e->tag == Iex_Unop) { |
| X86FpOp fpop = Xfp_INVALID; |
| switch (e->Iex.Unop.op) { |
| case Iop_NegF64: fpop = Xfp_NEG; break; |
| case Iop_AbsF64: fpop = Xfp_ABS; break; |
| default: break; |
| } |
| if (fpop != Xfp_INVALID) { |
| HReg res = newVRegF(env); |
| HReg src = iselDblExpr(env, e->Iex.Unop.arg); |
| addInstr(env, X86Instr_FpUnary(fpop,src,res)); |
| if (fpop != Xfp_NEG && fpop != Xfp_ABS) |
| roundToF64(env, res); |
| return res; |
| } |
| } |
| |
| if (e->tag == Iex_Unop) { |
| switch (e->Iex.Unop.op) { |
| case Iop_I32toF64: { |
| HReg dst = newVRegF(env); |
| HReg ri = iselIntExpr_R(env, e->Iex.Unop.arg); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(ri))); |
| set_FPU_rounding_default(env); |
| addInstr(env, X86Instr_FpLdStI( |
| True/*load*/, 4, dst, |
| X86AMode_IR(0, hregX86_ESP()))); |
| add_to_esp(env, 4); |
| return dst; |
| } |
| case Iop_ReinterpI64asF64: { |
| /* Given an I64, produce an IEEE754 double with the same |
| bit pattern. */ |
| HReg dst = newVRegF(env); |
| HReg rHi, rLo; |
| iselInt64Expr( &rHi, &rLo, env, e->Iex.Unop.arg); |
| /* paranoia */ |
| set_FPU_rounding_default(env); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(rHi))); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(rLo))); |
| addInstr(env, X86Instr_FpLdSt( |
| True/*load*/, 8, dst, |
| X86AMode_IR(0, hregX86_ESP()))); |
| add_to_esp(env, 8); |
| return dst; |
| } |
| case Iop_F32toF64: { |
| /* this is a no-op */ |
| HReg res = iselFltExpr(env, e->Iex.Unop.arg); |
| return res; |
| } |
| default: |
| break; |
| } |
| } |
| |
| /* --------- MULTIPLEX --------- */ |
| if (e->tag == Iex_Mux0X) { |
| if (ty == Ity_F64 |
| && typeOfIRExpr(env->type_env,e->Iex.Mux0X.cond) == Ity_I8) { |
| HReg r8 = iselIntExpr_R(env, e->Iex.Mux0X.cond); |
| HReg rX = iselDblExpr(env, e->Iex.Mux0X.exprX); |
| HReg r0 = iselDblExpr(env, e->Iex.Mux0X.expr0); |
| HReg dst = newVRegF(env); |
| addInstr(env, X86Instr_FpUnary(Xfp_MOV,rX,dst)); |
| addInstr(env, X86Instr_Test32(0xFF, r8)); |
| addInstr(env, X86Instr_FpCMov(Xcc_Z,r0,dst)); |
| return dst; |
| } |
| } |
| |
| ppIRExpr(e); |
| vpanic("iselDblExpr_wrk"); |
| } |
| |
| |
| /*---------------------------------------------------------*/ |
| /*--- ISEL: SIMD (Vector) expressions, 128 bit. ---*/ |
| /*---------------------------------------------------------*/ |
| |
| static HReg iselVecExpr ( ISelEnv* env, IRExpr* e ) |
| { |
| HReg r = iselVecExpr_wrk( env, e ); |
| # if 0 |
| vex_printf("\n"); ppIRExpr(e); vex_printf("\n"); |
| # endif |
| vassert(hregClass(r) == HRcVec128); |
| vassert(hregIsVirtual(r)); |
| return r; |
| } |
| |
| |
| /* DO NOT CALL THIS DIRECTLY */ |
| static HReg iselVecExpr_wrk ( ISelEnv* env, IRExpr* e ) |
| { |
| |
| # define REQUIRE_SSE1 \ |
| do { if (env->hwcaps == 0/*baseline, no sse*/) \ |
| goto vec_fail; \ |
| } while (0) |
| |
| # define REQUIRE_SSE2 \ |
| do { if (0 == (env->hwcaps & VEX_HWCAPS_X86_SSE2)) \ |
| goto vec_fail; \ |
| } while (0) |
| |
| # define SSE2_OR_ABOVE \ |
| (env->hwcaps & VEX_HWCAPS_X86_SSE2) |
| |
| MatchInfo mi; |
| Bool arg1isEReg = False; |
| X86SseOp op = Xsse_INVALID; |
| IRType ty = typeOfIRExpr(env->type_env,e); |
| vassert(e); |
| vassert(ty == Ity_V128); |
| |
| REQUIRE_SSE1; |
| |
| if (e->tag == Iex_Tmp) { |
| return lookupIRTemp(env, e->Iex.Tmp.tmp); |
| } |
| |
| if (e->tag == Iex_Get) { |
| HReg dst = newVRegV(env); |
| addInstr(env, X86Instr_SseLdSt( |
| True/*load*/, |
| dst, |
| X86AMode_IR(e->Iex.Get.offset, hregX86_EBP()) |
| ) |
| ); |
| return dst; |
| } |
| |
| if (e->tag == Iex_Load && e->Iex.Load.end == Iend_LE) { |
| HReg dst = newVRegV(env); |
| X86AMode* am = iselIntExpr_AMode(env, e->Iex.Load.addr); |
| addInstr(env, X86Instr_SseLdSt( True/*load*/, dst, am )); |
| return dst; |
| } |
| |
| if (e->tag == Iex_Const) { |
| HReg dst = newVRegV(env); |
| vassert(e->Iex.Const.con->tag == Ico_V128); |
| addInstr(env, X86Instr_SseConst(e->Iex.Const.con->Ico.V128, dst)); |
| return dst; |
| } |
| |
| if (e->tag == Iex_Unop) { |
| |
| if (SSE2_OR_ABOVE) { |
| /* 64UtoV128(LDle:I64(addr)) */ |
| DECLARE_PATTERN(p_zwiden_load64); |
| DEFINE_PATTERN(p_zwiden_load64, |
| unop(Iop_64UtoV128, |
| IRExpr_Load(Iend_LE,Ity_I64,bind(0)))); |
| if (matchIRExpr(&mi, p_zwiden_load64, e)) { |
| X86AMode* am = iselIntExpr_AMode(env, mi.bindee[0]); |
| HReg dst = newVRegV(env); |
| addInstr(env, X86Instr_SseLdzLO(8, dst, am)); |
| return dst; |
| } |
| } |
| |
| switch (e->Iex.Unop.op) { |
| |
| case Iop_NotV128: { |
| HReg arg = iselVecExpr(env, e->Iex.Unop.arg); |
| return do_sse_Not128(env, arg); |
| } |
| |
| case Iop_CmpNEZ64x2: { |
| /* We can use SSE2 instructions for this. */ |
| /* Ideally, we want to do a 64Ix2 comparison against zero of |
| the operand. Problem is no such insn exists. Solution |
| therefore is to do a 32Ix4 comparison instead, and bitwise- |
| negate (NOT) the result. Let a,b,c,d be 32-bit lanes, and |
| let the not'd result of this initial comparison be a:b:c:d. |
| What we need to compute is (a|b):(a|b):(c|d):(c|d). So, use |
| pshufd to create a value b:a:d:c, and OR that with a:b:c:d, |
| giving the required result. |
| |
| The required selection sequence is 2,3,0,1, which |
| according to Intel's documentation means the pshufd |
| literal value is 0xB1, that is, |
| (2 << 6) | (3 << 4) | (0 << 2) | (1 << 0) |
| */ |
| HReg arg = iselVecExpr(env, e->Iex.Unop.arg); |
| HReg tmp = newVRegV(env); |
| HReg dst = newVRegV(env); |
| REQUIRE_SSE2; |
| addInstr(env, X86Instr_SseReRg(Xsse_XOR, tmp, tmp)); |
| addInstr(env, X86Instr_SseReRg(Xsse_CMPEQ32, arg, tmp)); |
| tmp = do_sse_Not128(env, tmp); |
| addInstr(env, X86Instr_SseShuf(0xB1, tmp, dst)); |
| addInstr(env, X86Instr_SseReRg(Xsse_OR, tmp, dst)); |
| return dst; |
| } |
| |
| case Iop_CmpNEZ32x4: { |
| /* Sigh, we have to generate lousy code since this has to |
| work on SSE1 hosts */ |
| /* basically, the idea is: for each lane: |
| movl lane, %r ; negl %r (now CF = lane==0 ? 0 : 1) |
| sbbl %r, %r (now %r = 1Sto32(CF)) |
| movl %r, lane |
| */ |
| Int i; |
| X86AMode* am; |
| X86AMode* esp0 = X86AMode_IR(0, hregX86_ESP()); |
| HReg arg = iselVecExpr(env, e->Iex.Unop.arg); |
| HReg dst = newVRegV(env); |
| HReg r32 = newVRegI(env); |
| sub_from_esp(env, 16); |
| addInstr(env, X86Instr_SseLdSt(False/*store*/, arg, esp0)); |
| for (i = 0; i < 4; i++) { |
| am = X86AMode_IR(i*4, hregX86_ESP()); |
| addInstr(env, X86Instr_Alu32R(Xalu_MOV, X86RMI_Mem(am), r32)); |
| addInstr(env, X86Instr_Unary32(Xun_NEG, r32)); |
| addInstr(env, X86Instr_Alu32R(Xalu_SBB, X86RMI_Reg(r32), r32)); |
| addInstr(env, X86Instr_Alu32M(Xalu_MOV, X86RI_Reg(r32), am)); |
| } |
| addInstr(env, X86Instr_SseLdSt(True/*load*/, dst, esp0)); |
| add_to_esp(env, 16); |
| return dst; |
| } |
| |
| case Iop_CmpNEZ8x16: |
| case Iop_CmpNEZ16x8: { |
| /* We can use SSE2 instructions for this. */ |
| HReg arg; |
| HReg vec0 = newVRegV(env); |
| HReg vec1 = newVRegV(env); |
| HReg dst = newVRegV(env); |
| X86SseOp cmpOp |
| = e->Iex.Unop.op==Iop_CmpNEZ16x8 ? Xsse_CMPEQ16 |
| : Xsse_CMPEQ8; |
| REQUIRE_SSE2; |
| addInstr(env, X86Instr_SseReRg(Xsse_XOR, vec0, vec0)); |
| addInstr(env, mk_vMOVsd_RR(vec0, vec1)); |
| addInstr(env, X86Instr_Sse32Fx4(Xsse_CMPEQF, vec1, vec1)); |
| /* defer arg computation to here so as to give CMPEQF as long |
| as possible to complete */ |
| arg = iselVecExpr(env, e->Iex.Unop.arg); |
| /* vec0 is all 0s; vec1 is all 1s */ |
| addInstr(env, mk_vMOVsd_RR(arg, dst)); |
| /* 16x8 or 8x16 comparison == */ |
| addInstr(env, X86Instr_SseReRg(cmpOp, vec0, dst)); |
| /* invert result */ |
| addInstr(env, X86Instr_SseReRg(Xsse_XOR, vec1, dst)); |
| return dst; |
| } |
| |
| case Iop_Recip32Fx4: op = Xsse_RCPF; goto do_32Fx4_unary; |
| case Iop_RSqrt32Fx4: op = Xsse_RSQRTF; goto do_32Fx4_unary; |
| case Iop_Sqrt32Fx4: op = Xsse_SQRTF; goto do_32Fx4_unary; |
| do_32Fx4_unary: |
| { |
| HReg arg = iselVecExpr(env, e->Iex.Unop.arg); |
| HReg dst = newVRegV(env); |
| addInstr(env, X86Instr_Sse32Fx4(op, arg, dst)); |
| return dst; |
| } |
| |
| case Iop_Recip64Fx2: op = Xsse_RCPF; goto do_64Fx2_unary; |
| case Iop_RSqrt64Fx2: op = Xsse_RSQRTF; goto do_64Fx2_unary; |
| case Iop_Sqrt64Fx2: op = Xsse_SQRTF; goto do_64Fx2_unary; |
| do_64Fx2_unary: |
| { |
| HReg arg = iselVecExpr(env, e->Iex.Unop.arg); |
| HReg dst = newVRegV(env); |
| REQUIRE_SSE2; |
| addInstr(env, X86Instr_Sse64Fx2(op, arg, dst)); |
| return dst; |
| } |
| |
| case Iop_Recip32F0x4: op = Xsse_RCPF; goto do_32F0x4_unary; |
| case Iop_RSqrt32F0x4: op = Xsse_RSQRTF; goto do_32F0x4_unary; |
| case Iop_Sqrt32F0x4: op = Xsse_SQRTF; goto do_32F0x4_unary; |
| do_32F0x4_unary: |
| { |
| /* A bit subtle. We have to copy the arg to the result |
| register first, because actually doing the SSE scalar insn |
| leaves the upper 3/4 of the destination register |
| unchanged. Whereas the required semantics of these |
| primops is that the upper 3/4 is simply copied in from the |
| argument. */ |
| HReg arg = iselVecExpr(env, e->Iex.Unop.arg); |
| HReg dst = newVRegV(env); |
| addInstr(env, mk_vMOVsd_RR(arg, dst)); |
| addInstr(env, X86Instr_Sse32FLo(op, arg, dst)); |
| return dst; |
| } |
| |
| case Iop_Recip64F0x2: op = Xsse_RCPF; goto do_64F0x2_unary; |
| case Iop_RSqrt64F0x2: op = Xsse_RSQRTF; goto do_64F0x2_unary; |
| case Iop_Sqrt64F0x2: op = Xsse_SQRTF; goto do_64F0x2_unary; |
| do_64F0x2_unary: |
| { |
| /* A bit subtle. We have to copy the arg to the result |
| register first, because actually doing the SSE scalar insn |
| leaves the upper half of the destination register |
| unchanged. Whereas the required semantics of these |
| primops is that the upper half is simply copied in from the |
| argument. */ |
| HReg arg = iselVecExpr(env, e->Iex.Unop.arg); |
| HReg dst = newVRegV(env); |
| REQUIRE_SSE2; |
| addInstr(env, mk_vMOVsd_RR(arg, dst)); |
| addInstr(env, X86Instr_Sse64FLo(op, arg, dst)); |
| return dst; |
| } |
| |
| case Iop_32UtoV128: { |
| HReg dst = newVRegV(env); |
| X86AMode* esp0 = X86AMode_IR(0, hregX86_ESP()); |
| X86RMI* rmi = iselIntExpr_RMI(env, e->Iex.Unop.arg); |
| addInstr(env, X86Instr_Push(rmi)); |
| addInstr(env, X86Instr_SseLdzLO(4, dst, esp0)); |
| add_to_esp(env, 4); |
| return dst; |
| } |
| |
| case Iop_64UtoV128: { |
| HReg rHi, rLo; |
| HReg dst = newVRegV(env); |
| X86AMode* esp0 = X86AMode_IR(0, hregX86_ESP()); |
| iselInt64Expr(&rHi, &rLo, env, e->Iex.Unop.arg); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(rHi))); |
| addInstr(env, X86Instr_Push(X86RMI_Reg(rLo))); |
| addInstr(env, X86Instr_SseLdzLO(8, dst, esp0)); |
| add_to_esp(env, 8); |
| return dst; |
| } |
| |
| default: |
| break; |
| } /* switch (e->Iex.Unop.op) */ |
| } /* if (e->tag == Iex_Unop) */ |
| |
| if (e->tag == Iex_Binop) { |
| switch (e->Iex.Binop.op) { |
| |
| case Iop_SetV128lo32: { |
| HReg dst = newVRegV(env); |
| HReg srcV = iselVecExpr(env, e->Iex.Binop.arg1); |
| HReg srcI = iselIntExpr_R(env, e->Iex.Binop.arg2); |
| X86AMode* esp0 = X86AMode_IR(0, hregX86_ESP()); |
| sub_from_esp(env, 16); |
| addInstr(env, X86Instr_SseLdSt(False/*store*/, srcV, esp0)); |
| addInstr(env, X86Instr_Alu32M(Xalu_MOV, X86RI_Reg(srcI), esp0)); |
| addInstr(env, X86Instr_SseLdSt(True/*load*/, dst, esp0)); |
| add_to_esp(env, 16); |
| return dst; |
| } |
| |
| case Iop_SetV128lo64: { |
| HReg dst = newVRegV(env); |
| HReg srcV = iselVecExpr(env, e->Iex.Binop.arg1); |
| HReg srcIhi, srcIlo; |
| X86AMode* esp0 = X86AMode_IR(0, hregX86_ESP()); |
| X86AMode* esp4 = advance4(esp0); |
| iselInt64Expr(&srcIhi, &srcIlo, env, e->Iex.Binop.arg2); |
| sub_from_esp(env, 16); |
| addInstr(env, X86Instr_SseLdSt(False/*store*/, srcV, esp0)); |
| addInstr(env, X86Instr_Alu32M(Xalu_MOV, X86RI_Reg(srcIlo), esp0)); |
| addInstr(env, X86Instr_Alu32M(Xalu_MOV, X86RI_Reg(srcIhi), esp4)); |
| addInstr(env, X86Instr_SseLdSt(True/*load*/, dst, esp0)); |
| add_to_esp(env, 16); |
| return dst; |
| } |
| |
| case Iop_64HLtoV128: { |
| HReg r3, r2, r1, r0; |
| X86AMode* esp0 = X86AMode_IR(0, hregX86_ESP()); |
| X86AMode* esp4 = advance4(esp0); |
| X86AMode* esp8 = advance4(esp4); |
| X86AMode* esp12 = advance4(esp8); |
| HReg dst = newVRegV(env); |
| /* do this via the stack (easy, convenient, etc) */ |
| sub_from_esp(env, 16); |
| /* Do the less significant 64 bits */ |
| iselInt64Expr(&r1, &r0, env, e->Iex.Binop.arg2); |
| addInstr(env, X86Instr_Alu32M(Xalu_MOV, X86RI_Reg(r0), esp0)); |
| addInstr(env, X86Instr_Alu32M(Xalu_MOV, X86RI_Reg(r1), esp4)); |
| /* Do the more significant 64 bits */ |
| iselInt64Expr(&r3, &r2, env, e->Iex.Binop.arg1); |
| addInstr(env, X86Instr_Alu32M(Xalu_MOV, X86RI_Reg(r2), esp8)); |
| addInstr(env, X86Instr_Alu32M(Xalu_MOV, X86RI_Reg(r3), esp12)); |
| /* Fetch result back from stack. */ |
| addInstr(env, X86Instr_SseLdSt(True/*load*/, dst, esp0)); |
| add_to_esp(env, 16); |
| return dst; |
| } |
| |
| case Iop_CmpEQ32Fx4: op = Xsse_CMPEQF; goto do_32Fx4; |
| case Iop_CmpLT32Fx4: op = Xsse_CMPLTF; goto do_32Fx4; |
| case Iop_CmpLE32Fx4: op = Xsse_CMPLEF; goto do_32Fx4; |
| case Iop_CmpUN32Fx4: op = Xsse_CMPUNF; goto do_32Fx4; |
| case Iop_Add32Fx4: op = Xsse_ADDF; goto do_32Fx4; |
| case Iop_Div32Fx4: op = Xsse_DIVF; goto do_32Fx4; |
| case Iop_Max32Fx4: op = Xsse_MAXF; goto do_32Fx4; |
| case Iop_Min32Fx4: op = Xsse_MINF; goto do_32Fx4; |
| case Iop_Mul32Fx4: op = Xsse_MULF; goto do_32Fx4; |
| case Iop_Sub32Fx4: op = Xsse_SUBF; goto do_32Fx4; |
| do_32Fx4: |
| { |
| HReg argL = iselVecExpr(env, e->Iex.Binop.arg1); |
| HReg argR = iselVecExpr(env, e->Iex.Binop.arg2); |
| HReg dst = newVRegV(env); |
| addInstr(env, mk_vMOVsd_RR(argL, dst)); |
| addInstr(env, X86Instr_Sse32Fx4(op, argR, dst)); |
| return dst; |
| } |
| |
| case Iop_CmpEQ64Fx2: op = Xsse_CMPEQF; goto do_64Fx2; |
| case Iop_CmpLT64Fx2: op = Xsse_CMPLTF; goto do_64Fx2; |
| case Iop_CmpLE64Fx2: op = Xsse_CMPLEF; goto do_64Fx2; |
| case Iop_CmpUN64Fx2: op = Xsse_CMPUNF; goto do_64Fx2; |
| case Iop_Add64Fx2: op = Xsse_ADDF; goto do_64Fx2; |
| case Iop_Div64Fx2: op = Xsse_DIVF; goto do_64Fx2; |
| case Iop_Max64Fx2: op = Xsse_MAXF; goto do_64Fx2; |
| case Iop_Min64Fx2: op = Xsse_MINF; goto do_64Fx2; |
| case Iop_Mul64Fx2: op = Xsse_MULF; goto do_64Fx2; |
| case Iop_Sub64Fx2: op = Xsse_SUBF; goto do_64Fx2; |
| do_64Fx2: |
| { |
| HReg argL = iselVecExpr(env, e->Iex.Binop.arg1); |
| HReg argR = iselVecExpr(env, e->Iex.Binop.arg2); |
| HReg dst = newVRegV(env); |
| REQUIRE_SSE2; |
| addInstr(env, mk_vMOVsd_RR(argL, dst)); |
| addInstr(env, X86Instr_Sse64Fx2(op, argR, dst)); |
| return dst; |
| } |
| |
| case Iop_CmpEQ32F0x4: op = Xsse_CMPEQF; goto do_32F0x4; |
| case Iop_CmpLT32F0x4: op = Xsse_CMPLTF; goto do_32F0x4; |
| case Iop_CmpLE32F0x4: op = Xsse_CMPLEF; goto do_32F0x4; |
| case Iop_CmpUN32F0x4: op = Xsse_CMPUNF; goto do_32F0x4; |
| case Iop_Add32F0x4: op = Xsse_ADDF; goto do_32F0x4; |
| case Iop_Div32F0x4: op = Xsse_DIVF; goto do_32F0x4; |
| case Iop_Max32F0x4: op = Xsse_MAXF; goto do_32F0x4; |
| case Iop_Min32F0x4: op = Xsse_MINF; goto do_32F0x4; |
| case Iop_Mul32F0x4: op = Xsse_MULF; goto do_32F0x4; |
| case Iop_Sub32F0x4: op = Xsse_SUBF; goto do_32F0x4; |
| do_32F0x4: { |
| HReg argL = iselVecExpr(env, e->Iex.Binop.arg1); |
| HReg argR = iselVecExpr(env, e->Iex.Binop.arg2); |
| HReg dst = newVRegV(env); |
| addInstr(env, mk_vMOVsd_RR(argL, dst)); |
| addInstr(env, X86Instr_Sse32FLo(op, argR, dst)); |
| return dst; |
| } |
| |
| case Iop_CmpEQ64F0x2: op = Xsse_CMPEQF; goto do_64F0x2; |
| case Iop_CmpLT64F0x2: op = Xsse_CMPLTF; goto do_64F0x2; |
| case Iop_CmpLE64F0x2: op = Xsse_CMPLEF; goto do_64F0x2; |
| case Iop_CmpUN64F0x2: op = Xsse_CMPUNF; goto do_64F0x2; |
| case Iop_Add64F0x2: op = Xsse_ADDF; goto do_64F0x2; |
| case Iop_Div64F0x2: op = Xsse_DIVF; goto do_64F0x2; |
| case Iop_Max64F0x2: op = Xsse_MAXF; goto do_64F0x2; |
| case Iop_Min64F0x2: op = Xsse_MINF; goto do_64F0x2; |
| case Iop_Mul64F0x2: op = Xsse_MULF; goto do_64F0x2; |
| case Iop_Sub64F0x2: op = Xsse_SUBF; goto do_64F0x2; |
| do_64F0x2: { |
| HReg argL = iselVecExpr(env, e->Iex.Binop.arg1); |
| HReg argR = iselVecExpr(env, e->Iex.Binop.arg2); |
| HReg dst = newVRegV(env); |
| REQUIRE_SSE2; |
| addInstr(env, mk_vMOVsd_RR(argL, dst)); |
| addInstr(env, X86Instr_Sse64FLo(op, argR, dst)); |
| return dst; |
| } |
| |
| case Iop_QNarrow32Sx4: |
| op = Xsse_PACKSSD; arg1isEReg = True; goto do_SseReRg; |
| case Iop_QNarrow16Sx8: |
| op = Xsse_PACKSSW; arg1isEReg = True; goto do_SseReRg; |
| case Iop_QNarrow16Ux8: |
| op = Xsse_PACKUSW; arg1isEReg = True; goto do_SseReRg; |
| |
| case Iop_InterleaveHI8x16: |
| op = Xsse_UNPCKHB; arg1isEReg = True; goto do_SseReRg; |
| case Iop_InterleaveHI16x8: |
| op = Xsse_UNPCKHW; arg1isEReg = True; goto do_SseReRg; |
| case Iop_InterleaveHI32x4: |
| op = Xsse_UNPCKHD; arg1isEReg = True; goto do_SseReRg; |
| case Iop_InterleaveHI64x2: |
| op = Xsse_UNPCKHQ; arg1isEReg = True; goto do_SseReRg; |
| |
| case Iop_InterleaveLO8x16: |
| op = Xsse_UNPCKLB; arg1isEReg = True; goto do_SseReRg; |
| case Iop_InterleaveLO16x8: |
| op = Xsse_UNPCKLW; arg1isEReg = True; goto do_SseReRg; |
| case Iop_InterleaveLO32x4: |
| op = Xsse_UNPCKLD; arg1isEReg = True; goto do_SseReRg; |
| case Iop_InterleaveLO64x2: |
| op = Xsse_UNPCKLQ; arg1isEReg = True; goto do_SseReRg; |
| |
| case Iop_AndV128: op = Xsse_AND; goto do_SseReRg; |
| case Iop_OrV128: op = Xsse_OR; goto do_SseReRg; |
| case Iop_XorV128: op = Xsse_XOR; goto do_SseReRg; |
| case Iop_Add8x16: op = Xsse_ADD8; goto do_SseReRg; |
| case Iop_Add16x8: op = Xsse_ADD16; goto do_SseReRg; |
| case Iop_Add32x4: op = Xsse_ADD32; goto do_SseReRg; |
| case Iop_Add64x2: op = Xsse_ADD64; goto do_SseReRg; |
| case Iop_QAdd8Sx16: op = Xsse_QADD8S; goto do_SseReRg; |
| case Iop_QAdd16Sx8: op = Xsse_QADD16S; goto do_SseReRg; |
| case Iop_QAdd8Ux16: op = Xsse_QADD8U; goto do_SseReRg; |
| case Iop_QAdd16Ux8: op = Xsse_QADD16U; goto do_SseReRg; |
| case Iop_Avg8Ux16: op = Xsse_AVG8U; goto do_SseReRg; |
| case Iop_Avg16Ux8: op = Xsse_AVG16U; goto do_SseReRg; |
| case Iop_CmpEQ8x16: op = Xsse_CMPEQ8; goto do_SseReRg; |
| case Iop_CmpEQ16x8: op = Xsse_CMPEQ16; goto do_SseReRg; |
| case Iop_CmpEQ32x4: op = Xsse_CMPEQ32; goto do_SseReRg; |
| case Iop_CmpGT8Sx16: op = Xsse_CMPGT8S; goto do_SseReRg; |
| case Iop_CmpGT16Sx8: op = Xsse_CMPGT16S; goto do_SseReRg; |
| case Iop_CmpGT32Sx4: op = Xsse_CMPGT32S; goto do_SseReRg; |
| case Iop_Max16Sx8: op = Xsse_MAX16S; goto do_SseReRg; |
| case Iop_Max8Ux16: op = Xsse_MAX8U; goto do_SseReRg; |
| case Iop_Min16Sx8: op = Xsse_MIN16S; goto do_SseReRg; |
| case Iop_Min8Ux16: op = Xsse_MIN8U; goto do_SseReRg; |
| case Iop_MulHi16Ux8: op = Xsse_MULHI16U; goto do_SseReRg; |
| case Iop_MulHi16Sx8: op = Xsse_MULHI16S; goto do_SseReRg; |
| case Iop_Mul16x8: op = Xsse_MUL16; goto do_SseReRg; |
| case Iop_Sub8x16: op = Xsse_SUB8; goto do_SseReRg; |
| case Iop_Sub16x8: op = Xsse_SUB16; goto do_SseReRg; |
| case Iop_Sub32x4: op = Xsse_SUB32; goto do_SseReRg; |
| case Iop_Sub64x2: op = Xsse_SUB64; goto do_SseReRg; |
| case Iop_QSub8Sx16: op = Xsse_QSUB8S; goto do_SseReRg; |
| case Iop_QSub16Sx8: op = Xsse_QSUB16S; goto do_SseReRg; |
| case Iop_QSub8Ux16: op = Xsse_QSUB8U; goto do_SseReRg; |
| case Iop_QSub16Ux8: op = Xsse_QSUB16U; goto do_SseReRg; |
| do_SseReRg: { |
| HReg arg1 = iselVecExpr(env, e->Iex.Binop.arg1); |
| HReg arg2 = iselVecExpr(env, e->Iex.Binop.arg2); |
| HReg dst = newVRegV(env); |
| if (op != Xsse_OR && op != Xsse_AND && op != Xsse_XOR) |
| REQUIRE_SSE2; |
| if (arg1isEReg) { |
| addInstr(env, mk_vMOVsd_RR(arg2, dst)); |
| addInstr(env, X86Instr_SseReRg(op, arg1, dst)); |
| } else { |
| addInstr(env, mk_vMOVsd_RR(arg1, dst)); |
| addInstr(env, X86Instr_SseReRg(op, arg2, dst)); |
| } |
| return dst; |
| } |
| |
| case Iop_ShlN16x8: op = Xsse_SHL16; goto do_SseShift; |
| case Iop_ShlN32x4: op = Xsse_SHL32; goto do_SseShift; |
| case Iop_ShlN64x2: op = Xsse_SHL64; goto do_SseShift; |
| case Iop_SarN16x8: op = Xsse_SAR16; goto do_SseShift; |
| case Iop_SarN32x4: op = Xsse_SAR32; goto do_SseShift; |
| case Iop_ShrN16x8: op = Xsse_SHR16; goto do_SseShift; |
| case Iop_ShrN32x4: op = Xsse_SHR32; goto do_SseShift; |
| case Iop_ShrN64x2: op = Xsse_SHR64; goto do_SseShift; |
| do_SseShift: { |
| HReg greg = iselVecExpr(env, e->Iex.Binop.arg1); |
| X86RMI* rmi = iselIntExpr_RMI(env, e->Iex.Binop.arg2); |
| X86AMode* esp0 = X86AMode_IR(0, hregX86_ESP()); |
| HReg ereg = newVRegV(env); |
| HReg dst = newVRegV(env); |
| REQUIRE_SSE2; |
| addInstr(env, X86Instr_Push(X86RMI_Imm(0))); |
| addInstr(env, X86Instr_Push(X86RMI_Imm(0))); |
| addInstr(env, X86Instr_Push(X86RMI_Imm(0))); |
| addInstr(env, X86Instr_Push(rmi)); |
| addInstr(env, X86Instr_SseLdSt(True/*load*/, ereg, esp0)); |
| addInstr(env, mk_vMOVsd_RR(greg, dst)); |
| addInstr(env, X86Instr_SseReRg(op, ereg, dst)); |
| add_to_esp(env, 16); |
| return dst; |
| } |
| |
| default: |
| break; |
| } /* switch (e->Iex.Binop.op) */ |
| } /* if (e->tag == Iex_Binop) */ |
| |
| if (e->tag == Iex_Mux0X) { |
| HReg r8 = iselIntExpr_R(env, e->Iex.Mux0X.cond); |
| HReg rX = iselVecExpr(env, e->Iex.Mux0X.exprX); |
| HReg r0 = iselVecExpr(env, e->Iex.Mux0X.expr0); |
| HReg dst = newVRegV(env); |
| addInstr(env, mk_vMOVsd_RR(rX,dst)); |
| addInstr(env, X86Instr_Test32(0xFF, r8)); |
| addInstr(env, X86Instr_SseCMov(Xcc_Z,r0,dst)); |
| return dst; |
| } |
| |
| vec_fail: |
| vex_printf("iselVecExpr (hwcaps = %s): can't reduce\n", |
| LibVEX_ppVexHwCaps(VexArchX86,env->hwcaps)); |
| ppIRExpr(e); |
| vpanic("iselVecExpr_wrk"); |
| |
| # undef REQUIRE_SSE1 |
| # undef REQUIRE_SSE2 |
| # undef SSE2_OR_ABOVE |
| } |
| |
| |
| /*---------------------------------------------------------*/ |
| /*--- ISEL: Statements ---*/ |
| /*---------------------------------------------------------*/ |
| |
| static void iselStmt ( ISelEnv* env, IRStmt* stmt ) |
| { |
| if (vex_traceflags & VEX_TRACE_VCODE) { |
| vex_printf("\n-- "); |
| ppIRStmt(stmt); |
| vex_printf("\n"); |
| } |
| |
| switch (stmt->tag) { |
| |
| /* --------- STORE --------- */ |
| case Ist_Store: { |
| X86AMode* am; |
| IRType tya = typeOfIRExpr(env->type_env, stmt->Ist.Store.addr); |
| IRType tyd = typeOfIRExpr(env->type_env, stmt->Ist.Store.data); |
| IREndness end = stmt->Ist.Store.end; |
| |
| if (tya != Ity_I32 || end != Iend_LE) |
| goto stmt_fail; |
| |
| am = iselIntExpr_AMode(env, stmt->Ist.Store.addr); |
| if (tyd == Ity_I32) { |
| X86RI* ri = iselIntExpr_RI(env, stmt->Ist.Store.data); |
| addInstr(env, X86Instr_Alu32M(Xalu_MOV,ri,am)); |
| return; |
| } |
| if (tyd == Ity_I8 || tyd == Ity_I16) { |
| HReg r = iselIntExpr_R(env, stmt->Ist.Store.data); |
| addInstr(env, X86Instr_Store( toUChar(tyd==Ity_I8 ? 1 : 2), |
| r,am )); |
| return; |
| } |
| if (tyd == Ity_F64) { |
| HReg r = iselDblExpr(env, stmt->Ist.Store.data); |
| addInstr(env, X86Instr_FpLdSt(False/*store*/, 8, r, am)); |
| return; |
| } |
| if (tyd == Ity_F32) { |
| HReg r = iselFltExpr(env, stmt->Ist.Store.data); |
| addInstr(env, X86Instr_FpLdSt(False/*store*/, 4, r, am)); |
| return; |
| } |
| if (tyd == Ity_I64) { |
| HReg vHi, vLo, rA; |
| iselInt64Expr(&vHi, &vLo, env, stmt->Ist.Store.data); |
| rA = iselIntExpr_R(env, stmt->Ist.Store.addr); |
| addInstr(env, X86Instr_Alu32M( |
| Xalu_MOV, X86RI_Reg(vLo), X86AMode_IR(0, rA))); |
| addInstr(env, X86Instr_Alu32M( |
| Xalu_MOV, X86RI_Reg(vHi), X86AMode_IR(4, rA))); |
| return; |
| } |
| if (tyd == Ity_V128) { |
| HReg r = iselVecExpr(env, stmt->Ist.Store.data); |
| addInstr(env, X86Instr_SseLdSt(False/*store*/, r, am)); |
| return; |
| } |
| break; |
| } |
| |
| /* --------- PUT --------- */ |
| case Ist_Put: { |
| IRType ty = typeOfIRExpr(env->type_env, stmt->Ist.Put.data); |
| if (ty == Ity_I32) { |
| /* We're going to write to memory, so compute the RHS into an |
| X86RI. */ |
| X86RI* ri = iselIntExpr_RI(env, stmt->Ist.Put.data); |
| addInstr(env, |
| X86Instr_Alu32M( |
| Xalu_MOV, |
| ri, |
| X86AMode_IR(stmt->Ist.Put.offset,hregX86_EBP()) |
| )); |
| return; |
| } |
| if (ty == Ity_I8 || ty == Ity_I16) { |
| HReg r = iselIntExpr_R(env, stmt->Ist.Put.data); |
| addInstr(env, X86Instr_Store( |
| toUChar(ty==Ity_I8 ? 1 : 2), |
| r, |
| X86AMode_IR(stmt->Ist.Put.offset, |
| hregX86_EBP()))); |
| return; |
| } |
| if (ty == Ity_I64) { |
| HReg vHi, vLo; |
| X86AMode* am = X86AMode_IR(stmt->Ist.Put.offset, hregX86_EBP()); |
| X86AMode* am4 = advance4(am); |
| iselInt64Expr(&vHi, &vLo, env, stmt->Ist.Put.data); |
| addInstr(env, X86Instr_Alu32M( Xalu_MOV, X86RI_Reg(vLo), am )); |
| addInstr(env, X86Instr_Alu32M( Xalu_MOV, X86RI_Reg(vHi), am4 )); |
| return; |
| } |
| if (ty == Ity_V128) { |
| HReg vec = iselVecExpr(env, stmt->Ist.Put.data); |
| X86AMode* am = X86AMode_IR(stmt->Ist.Put.offset, hregX86_EBP()); |
| addInstr(env, X86Instr_SseLdSt(False/*store*/, vec, am)); |
| return; |
| } |
| if (ty == Ity_F32) { |
| HReg f32 = iselFltExpr(env, stmt->Ist.Put.data); |
| X86AMode* am = X86AMode_IR(stmt->Ist.Put.offset, hregX86_EBP()); |
| set_FPU_rounding_default(env); /* paranoia */ |
| addInstr(env, X86Instr_FpLdSt( False/*store*/, 4, f32, am )); |
| return; |
| } |
| if (ty == Ity_F64) { |
| HReg f64 = iselDblExpr(env, stmt->Ist.Put.data); |
| X86AMode* am = X86AMode_IR(stmt->Ist.Put.offset, hregX86_EBP()); |
| set_FPU_rounding_default(env); /* paranoia */ |
| addInstr(env, X86Instr_FpLdSt( False/*store*/, 8, f64, am )); |
| return; |
| } |
| break; |
| } |
| |
| /* --------- Indexed PUT --------- */ |
| case Ist_PutI: { |
| X86AMode* am |
| = genGuestArrayOffset( |
| env, stmt->Ist.PutI.descr, |
| stmt->Ist.PutI.ix, stmt->Ist.PutI.bias ); |
| |
| IRType ty = typeOfIRExpr(env->type_env, stmt->Ist.PutI.data); |
| if (ty == Ity_F64) { |
| HReg val = iselDblExpr(env, stmt->Ist.PutI.data); |
| addInstr(env, X86Instr_FpLdSt( False/*store*/, 8, val, am )); |
| return; |
| } |
| if (ty == Ity_I8) { |
| HReg r = iselIntExpr_R(env, stmt->Ist.PutI.data); |
| addInstr(env, X86Instr_Store( 1, r, am )); |
| return; |
| } |
| if (ty == Ity_I32) { |
| HReg r = iselIntExpr_R(env, stmt->Ist.PutI.data); |
| addInstr(env, X86Instr_Alu32M( Xalu_MOV, X86RI_Reg(r), am )); |
| return; |
| } |
| if (ty == Ity_I64) { |
| HReg rHi, rLo; |
| X86AMode* am4 = advance4(am); |
| iselInt64Expr(&rHi, &rLo, env, stmt->Ist.PutI.data); |
| addInstr(env, X86Instr_Alu32M( Xalu_MOV, X86RI_Reg(rLo), am )); |
| addInstr(env, X86Instr_Alu32M( Xalu_MOV, X86RI_Reg(rHi), am4 )); |
| return; |
| } |
| break; |
| } |
| |
| /* --------- TMP --------- */ |
| case Ist_Tmp: { |
| IRTemp tmp = stmt->Ist.Tmp.tmp; |
| IRType ty = typeOfIRTemp(env->type_env, tmp); |
| if (ty == Ity_I32 || ty == Ity_I16 || ty == Ity_I8) { |
| X86RMI* rmi = iselIntExpr_RMI(env, stmt->Ist.Tmp.data); |
| HReg dst = lookupIRTemp(env, tmp); |
| addInstr(env, X86Instr_Alu32R(Xalu_MOV,rmi,dst)); |
| return; |
| } |
| if (ty == Ity_I64) { |
| HReg rHi, rLo, dstHi, dstLo; |
| iselInt64Expr(&rHi,&rLo, env, stmt->Ist.Tmp.data); |
| lookupIRTemp64( &dstHi, &dstLo, env, tmp); |
| addInstr(env, mk_iMOVsd_RR(rHi,dstHi) ); |
| addInstr(env, mk_iMOVsd_RR(rLo,dstLo) ); |
| return; |
| } |
| if (ty == Ity_I1) { |
| X86CondCode cond = iselCondCode(env, stmt->Ist.Tmp.data); |
| HReg dst = lookupIRTemp(env, tmp); |
| addInstr(env, X86Instr_Set32(cond, dst)); |
| return; |
| } |
| if (ty == Ity_F64) { |
| HReg dst = lookupIRTemp(env, tmp); |
| HReg src = iselDblExpr(env, stmt->Ist.Tmp.data); |
| addInstr(env, X86Instr_FpUnary(Xfp_MOV,src,dst)); |
| return; |
| } |
| if (ty == Ity_F32) { |
| HReg dst = lookupIRTemp(env, tmp); |
| HReg src = iselFltExpr(env, stmt->Ist.Tmp.data); |
| addInstr(env, X86Instr_FpUnary(Xfp_MOV,src,dst)); |
| return; |
| } |
| if (ty == Ity_V128) { |
| HReg dst = lookupIRTemp(env, tmp); |
| HReg src = iselVecExpr(env, stmt->Ist.Tmp.data); |
| addInstr(env, mk_vMOVsd_RR(src,dst)); |
| return; |
| } |
| break; |
| } |
| |
| /* --------- Call to DIRTY helper --------- */ |
| case Ist_Dirty: { |
| IRType retty; |
| IRDirty* d = stmt->Ist.Dirty.details; |
| Bool passBBP = False; |
| |
| if (d->nFxState == 0) |
| vassert(!d->needsBBP); |
| |
| passBBP = toBool(d->nFxState > 0 && d->needsBBP); |
| |
| /* Marshal args, do the call, clear stack. */ |
| doHelperCall( env, passBBP, d->guard, d->cee, d->args ); |
| |
| /* Now figure out what to do with the returned value, if any. */ |
| if (d->tmp == IRTemp_INVALID) |
| /* No return value. Nothing to do. */ |
| return; |
| |
| retty = typeOfIRTemp(env->type_env, d->tmp); |
| if (retty == Ity_I64) { |
| HReg dstHi, dstLo; |
| /* The returned value is in %edx:%eax. Park it in the |
| register-pair associated with tmp. */ |
| lookupIRTemp64( &dstHi, &dstLo, env, d->tmp); |
| addInstr(env, mk_iMOVsd_RR(hregX86_EDX(),dstHi) ); |
| addInstr(env, mk_iMOVsd_RR(hregX86_EAX(),dstLo) ); |
| return; |
| } |
| if (retty == Ity_I32 || retty == Ity_I16 || retty == Ity_I8) { |
| /* The returned value is in %eax. Park it in the register |
| associated with tmp. */ |
| HReg dst = lookupIRTemp(env, d->tmp); |
| addInstr(env, mk_iMOVsd_RR(hregX86_EAX(),dst) ); |
| return; |
| } |
| break; |
| } |
| |
| /* --------- MEM FENCE --------- */ |
| case Ist_MFence: |
| addInstr(env, X86Instr_MFence(env->hwcaps)); |
| return; |
| |
| /* --------- INSTR MARK --------- */ |
| /* Doesn't generate any executable code ... */ |
| case Ist_IMark: |
| return; |
| |
| /* --------- NO-OP --------- */ |
| /* Fairly self-explanatory, wouldn't you say? */ |
| case Ist_NoOp: |
| return; |
| |
| /* --------- EXIT --------- */ |
| case Ist_Exit: { |
| X86RI* dst; |
| X86CondCode cc; |
| if (stmt->Ist.Exit.dst->tag != Ico_U32) |
| vpanic("isel_x86: Ist_Exit: dst is not a 32-bit value"); |
| dst = iselIntExpr_RI(env, IRExpr_Const(stmt->Ist.Exit.dst)); |
| cc = iselCondCode(env,stmt->Ist.Exit.guard); |
| addInstr(env, X86Instr_Goto(stmt->Ist.Exit.jk, cc, dst)); |
| return; |
| } |
| |
| default: break; |
| } |
| stmt_fail: |
| ppIRStmt(stmt); |
| vpanic("iselStmt"); |
| } |
| |
| |
| /*---------------------------------------------------------*/ |
| /*--- ISEL: Basic block terminators (Nexts) ---*/ |
| /*---------------------------------------------------------*/ |
| |
| static void iselNext ( ISelEnv* env, IRExpr* next, IRJumpKind jk ) |
| { |
| X86RI* ri; |
| if (vex_traceflags & VEX_TRACE_VCODE) { |
| vex_printf("\n-- goto {"); |
| ppIRJumpKind(jk); |
| vex_printf("} "); |
| ppIRExpr(next); |
| vex_printf("\n"); |
| } |
| ri = iselIntExpr_RI(env, next); |
| addInstr(env, X86Instr_Goto(jk, Xcc_ALWAYS,ri)); |
| } |
| |
| |
| /*---------------------------------------------------------*/ |
| /*--- Insn selector top-level ---*/ |
| /*---------------------------------------------------------*/ |
| |
| /* Translate an entire BB to x86 code. */ |
| |
| HInstrArray* iselBB_X86 ( IRBB* bb, VexArch arch_host, |
| VexArchInfo* archinfo_host ) |
| { |
| Int i, j; |
| HReg hreg, hregHI; |
| ISelEnv* env; |
| UInt hwcaps_host = archinfo_host->hwcaps; |
| |
| /* sanity ... */ |
| vassert(arch_host == VexArchX86); |
| vassert(0 == (hwcaps_host & ~(VEX_HWCAPS_X86_SSE1 |
| |VEX_HWCAPS_X86_SSE2 |
| |VEX_HWCAPS_X86_SSE3))); |
| |
| /* Make up an initial environment to use. */ |
| env = LibVEX_Alloc(sizeof(ISelEnv)); |
| env->vreg_ctr = 0; |
| |
| /* Set up output code array. */ |
| env->code = newHInstrArray(); |
| |
| /* Copy BB's type env. */ |
| env->type_env = bb->tyenv; |
| |
| /* Make up an IRTemp -> virtual HReg mapping. This doesn't |
| change as we go along. */ |
| env->n_vregmap = bb->tyenv->types_used; |
| env->vregmap = LibVEX_Alloc(env->n_vregmap * sizeof(HReg)); |
| env->vregmapHI = LibVEX_Alloc(env->n_vregmap * sizeof(HReg)); |
| |
| /* and finally ... */ |
| env->hwcaps = hwcaps_host; |
| |
| /* For each IR temporary, allocate a suitably-kinded virtual |
| register. */ |
| j = 0; |
| for (i = 0; i < env->n_vregmap; i++) { |
| hregHI = hreg = INVALID_HREG; |
| switch (bb->tyenv->types[i]) { |
| case Ity_I1: |
| case Ity_I8: |
| case Ity_I16: |
| case Ity_I32: hreg = mkHReg(j++, HRcInt32, True); break; |
| case Ity_I64: hreg = mkHReg(j++, HRcInt32, True); |
| hregHI = mkHReg(j++, HRcInt32, True); break; |
| case Ity_F32: |
| case Ity_F64: hreg = mkHReg(j++, HRcFlt64, True); break; |
| case Ity_V128: hreg = mkHReg(j++, HRcVec128, True); break; |
| default: ppIRType(bb->tyenv->types[i]); |
| vpanic("iselBB: IRTemp type"); |
| } |
| env->vregmap[i] = hreg; |
| env->vregmapHI[i] = hregHI; |
| } |
| env->vreg_ctr = j; |
| |
| /* Ok, finally we can iterate over the statements. */ |
| for (i = 0; i < bb->stmts_used; i++) |
| iselStmt(env,bb->stmts[i]); |
| |
| iselNext(env,bb->next,bb->jumpkind); |
| |
| /* record the number of vregs we used. */ |
| env->code->n_vregs = env->vreg_ctr; |
| return env->code; |
| } |
| |
| |
| /*---------------------------------------------------------------*/ |
| /*--- end host-x86/isel.c ---*/ |
| /*---------------------------------------------------------------*/ |