Clean up and modularise debug info reading a little. The stabs and
dwarf2 readers are now in seperate procedures.
git-svn-id: svn://svn.valgrind.org/valgrind/trunk@349 a5019735-40e9-0310-863c-91ae7b9d1cf9
diff --git a/vg_symtab2.c b/vg_symtab2.c
index c869b6e..5e3b838 100644
--- a/vg_symtab2.c
+++ b/vg_symtab2.c
@@ -52,24 +52,6 @@
/*--- Structs n stuff ---*/
/*------------------------------------------------------------*/
-/* Stabs entry types, from:
- * The "stabs" debug format
- * Menapace, Kingdon and MacKenzie
- * Cygnus Support
- */
-typedef enum { N_GSYM = 32, /* Global symbol */
- N_FUN = 36, /* Function start or end */
- N_STSYM = 38, /* Data segment file-scope variable */
- N_LCSYM = 40, /* BSS segment file-scope variable */
- N_RSYM = 64, /* Register variable */
- N_SLINE = 68, /* Source line number */
- N_SO = 100, /* Source file path and name */
- N_LSYM = 128, /* Stack variable or type */
- N_SOL = 132, /* Include file name */
- N_LBRAC = 192, /* Start of lexical block */
- N_RBRAC = 224 /* End of lexical block */
- } stab_types;
-
/* A structure to hold an ELF symbol (very crudely). */
typedef
struct {
@@ -258,6 +240,53 @@
}
+/* Top-level place to call to add a source-location mapping entry. */
+
+static __inline__
+void addLineInfo ( SegInfo* si,
+ Int fnmoff,
+ Addr this,
+ Addr next,
+ Int lineno,
+ Int entry )
+{
+ RiLoc loc;
+ Int size = next - this;
+
+ /* Ignore zero-sized locs */
+ if (this == next) return;
+
+ /* Maximum sanity checking. Some versions of GNU as do a shabby
+ * job with stabs entries; if anything looks suspicious, revert to
+ * a size of 1. This should catch the instruction of interest
+ * (since if using asm-level debug info, one instruction will
+ * correspond to one line, unlike with C-level debug info where
+ * multiple instructions can map to the one line), but avoid
+ * catching any other instructions bogusly. */
+ if (this > next) {
+ VG_(message)(Vg_DebugMsg,
+ "warning: stabs addresses out of order "
+ "at entry %d: 0x%x 0x%x", entry, this, next);
+ size = 1;
+ }
+
+ if (size > MAX_LOC_SIZE) {
+ VG_(message)(Vg_DebugMsg,
+ "warning: stabs line address range too large "
+ "at entry %d: %d", entry, size);
+ size = 1;
+ }
+
+ vg_assert(this < si->start + si->size && next-1 >= si->start);
+ vg_assert(lineno >= 0 && lineno <= MAX_LINENO);
+
+ loc.addr = this;
+ loc.size = (UShort)size;
+ loc.lineno = lineno;
+ loc.fnmoff = fnmoff;
+ addLoc ( si, &loc );
+}
+
/*------------------------------------------------------------*/
/*--- Helpers ---*/
@@ -317,6 +346,7 @@
}
#endif
+
/*------------------------------------------------------------*/
/*--- Canonicalisers ---*/
/*------------------------------------------------------------*/
@@ -474,7 +504,8 @@
/* Sort the location table by starting address. Mash the table around
so as to establish the property that addresses are in order and the
ranges do not overlap. This facilitates using binary search to map
- addresses to locations when we come to query the table. */
+ addresses to locations when we come to query the table.
+*/
static
void canonicaliseLoctab ( SegInfo* si )
{
@@ -562,82 +593,229 @@
/*------------------------------------------------------------*/
-/*--- Read info from a .so/exe file. ---*/
+/*--- Read STABS format debug info. ---*/
/*------------------------------------------------------------*/
-static __inline__
-void addLineInfo ( SegInfo* si,
- Int fnmoff,
- Addr this,
- Addr next,
- Int lineno,
- Int entry )
+/* Stabs entry types, from:
+ * The "stabs" debug format
+ * Menapace, Kingdon and MacKenzie
+ * Cygnus Support
+ */
+typedef enum { N_GSYM = 32, /* Global symbol */
+ N_FUN = 36, /* Function start or end */
+ N_STSYM = 38, /* Data segment file-scope variable */
+ N_LCSYM = 40, /* BSS segment file-scope variable */
+ N_RSYM = 64, /* Register variable */
+ N_SLINE = 68, /* Source line number */
+ N_SO = 100, /* Source file path and name */
+ N_LSYM = 128, /* Stack variable or type */
+ N_SOL = 132, /* Include file name */
+ N_LBRAC = 192, /* Start of lexical block */
+ N_RBRAC = 224 /* End of lexical block */
+ } stab_types;
+
+
+/* Read stabs-format debug info. This is all rather horrible because
+ stabs is a underspecified, kludgy hack.
+*/
+static
+void read_debuginfo_stabs ( SegInfo* si,
+ UChar* stabC, Int stab_sz,
+ UChar* stabstr, Int stabstr_sz )
{
- RiLoc loc;
- Int size = next - this;
+ Int i;
+ Int curr_filenmoff;
+ Addr curr_fnbaseaddr;
+ Char *curr_file_name, *curr_fn_name;
+ Int n_stab_entries;
+ Int prev_lineno, lineno;
+ Int lineno_overflows;
+ Bool same_file;
+ struct nlist* stab = (struct nlist*)stabC;
+ /* Ok. It all looks plausible. Go on and read debug data.
+ stab kinds: 100 N_SO a source file name
+ 68 N_SLINE a source line number
+ 36 N_FUN start of a function
- /* Ignore zero-sized locs */
- if (this == next) return;
+ In this loop, we maintain a current file name, updated as
+ N_SO/N_SOLs appear, and a current function base address,
+ updated as N_FUNs appear. Based on that, address ranges for
+ N_SLINEs are calculated, and stuffed into the line info table.
- /* Maximum sanity checking. Some versions of GNU as do a shabby job with
- * stabs entries; if anything looks suspicious, revert to a size of 1.
- * This should catch the instruction of interest (since if using asm-level
- * debug info, one instruction will correspond to one line, unlike with
- * C-level debug info where multiple instructions can map to the one line),
- * but avoid catching any other instructions bogusly. */
- if (this > next) {
- VG_(message)(Vg_DebugMsg,
- "warning: stabs addresses out of order "
- "at entry %d: 0x%x 0x%x", entry, this, next);
- size = 1;
- }
+ Finding the instruction address range covered by an N_SLINE is
+ complicated; see the N_SLINE case below.
+ */
+ curr_filenmoff = addStr(si,"???");
+ curr_fnbaseaddr = (Addr)NULL;
+ curr_file_name = curr_fn_name = (Char*)NULL;
+ lineno = prev_lineno = 0;
+ lineno_overflows = 0;
+ same_file = True;
- if (size > MAX_LOC_SIZE) {
- VG_(message)(Vg_DebugMsg,
- "warning: stabs line address range too large "
- "at entry %d: %d", entry, size);
- size = 1;
- }
+ n_stab_entries = stab_sz/(int)sizeof(struct nlist);
- vg_assert(this < si->start + si->size && next-1 >= si->start);
- vg_assert(lineno >= 0 && lineno <= MAX_LINENO);
+ for (i = 0; i < n_stab_entries; i++) {
+# if 0
+ VG_(printf) ( " %2d ", i );
+ VG_(printf) ( "type=0x%x othr=%d desc=%d value=0x%x strx=%d %s",
+ stab[i].n_type, stab[i].n_other, stab[i].n_desc,
+ (int)stab[i].n_value,
+ (int)stab[i].n_un.n_strx,
+ stabstr + stab[i].n_un.n_strx );
+ VG_(printf)("\n");
+# endif
- loc.addr = this;
- loc.size = (UShort)size;
- loc.lineno = lineno;
- loc.fnmoff = fnmoff;
- addLoc ( si, &loc );
+ Char *no_fn_name = "???";
+
+ switch (stab[i].n_type) {
+ UInt next_addr;
+
+ /* Two complicated things here:
+ *
+ * 1. the n_desc field in 'struct n_list' in a.out.h is only
+ * 16-bits, which gives a maximum of 65535 lines. We handle
+ * files bigger than this by detecting heuristically
+ * overflows -- if the line count goes from 65000-odd to
+ * 0-odd within the same file, we assume it's an overflow.
+ * Once we switch files, we zero the overflow count.
+ *
+ * 2. To compute the instr address range covered by a single
+ * line, find the address of the next thing and compute the
+ * difference. The approach used depends on what kind of
+ * entry/entries follow...
+ */
+ case N_SLINE: {
+ Int this_addr = (UInt)stab[i].n_value;
+
+ /* Although stored as a short, neg values really are >
+ * 32768, hence the UShort cast. Then we use an Int to
+ * handle overflows. */
+ prev_lineno = lineno;
+ lineno = (Int)((UShort)stab[i].n_desc);
+
+ if (prev_lineno > lineno + OVERFLOW_DIFFERENCE && same_file) {
+ VG_(message)(Vg_DebugMsg,
+ "Line number overflow detected (%d --> %d) in %s",
+ prev_lineno, lineno, curr_file_name);
+ lineno_overflows++;
+ }
+ same_file = True;
+
+ LOOP:
+ if (i+1 >= n_stab_entries) {
+ /* If it's the last entry, just guess the range is
+ * four; can't do any better */
+ next_addr = this_addr + 4;
+ } else {
+ switch (stab[i+1].n_type) {
+ /* Easy, common case: use address of next entry */
+ case N_SLINE: case N_SO:
+ next_addr = (UInt)stab[i+1].n_value;
+ break;
+
+ /* Boring one: skip, look for something more
+ useful. */
+ case N_RSYM: case N_LSYM: case N_LBRAC: case N_RBRAC:
+ case N_STSYM: case N_LCSYM: case N_GSYM:
+ i++;
+ goto LOOP;
+
+ /* Should be an end of fun entry, use its address */
+ case N_FUN:
+ if ('\0' == * (stabstr + stab[i+1].n_un.n_strx) ) {
+ next_addr = (UInt)stab[i+1].n_value;
+ } else {
+ VG_(message)(Vg_DebugMsg,
+ "warning: function %s missing closing "
+ "N_FUN stab at entry %d",
+ curr_fn_name, i );
+ next_addr = this_addr; /* assume zero-size loc */
+ }
+ break;
+
+ /* N_SOL should be followed by an N_SLINE which can
+ be used */
+ case N_SOL:
+ if (i+2 < n_stab_entries && N_SLINE == stab[i+2].n_type) {
+ next_addr = (UInt)stab[i+2].n_value;
+ break;
+ } else {
+ VG_(printf)("unhandled N_SOL stabs case: %d %d %d",
+ stab[i+1].n_type, i, n_stab_entries);
+ VG_(panic)("unhandled N_SOL stabs case");
+ }
+
+ default:
+ VG_(printf)("unhandled (other) stabs case: %d %d",
+ stab[i+1].n_type,i);
+ /* VG_(panic)("unhandled (other) stabs case"); */
+ next_addr = this_addr + 4;
+ break;
+ }
+ }
+
+ addLineInfo ( si, curr_filenmoff, curr_fnbaseaddr + this_addr,
+ curr_fnbaseaddr + next_addr,
+ lineno + lineno_overflows * LINENO_OVERFLOW, i);
+ break;
+ }
+
+ case N_FUN: {
+ if ('\0' != (stabstr + stab[i].n_un.n_strx)[0] ) {
+ /* N_FUN with a name -- indicates the start of a fn. */
+ curr_fnbaseaddr = si->offset + (Addr)stab[i].n_value;
+ curr_fn_name = stabstr + stab[i].n_un.n_strx;
+ } else {
+ curr_fn_name = no_fn_name;
+ }
+ break;
+ }
+
+ case N_SOL:
+ if (lineno_overflows != 0) {
+ VG_(message)(Vg_UserMsg,
+ "Warning: file %s is very big (> 65535 lines) "
+ "Line numbers and annotation for this file might "
+ "be wrong. Sorry",
+ curr_file_name);
+ }
+ /* fall through! */
+ case N_SO:
+ lineno_overflows = 0;
+
+ /* seems to give lots of locations in header files */
+ /* case 130: */ /* BINCL */
+ {
+ UChar* nm = stabstr + stab[i].n_un.n_strx;
+ UInt len = VG_(strlen)(nm);
+
+ if (len > 0 && nm[len-1] != '/') {
+ curr_filenmoff = addStr ( si, nm );
+ curr_file_name = stabstr + stab[i].n_un.n_strx;
+ }
+ else
+ if (len == 0)
+ curr_filenmoff = addStr ( si, "?1\0" );
+
+ break;
+ }
+
+# if 0
+ case 162: /* EINCL */
+ curr_filenmoff = addStr ( si, "?2\0" );
+ break;
+# endif
+
+ default:
+ break;
+ }
+ } /* for (i = 0; i < stab_sz/(int)sizeof(struct nlist); i++) */
}
-static
-UInt read_leb128 ( UChar* data, Int* length_return, Int sign )
-{
- UInt result = 0;
- UInt num_read = 0;
- Int shift = 0;
- UChar byte;
-
- do
- {
- byte = * data ++;
- num_read ++;
-
- result |= (byte & 0x7f) << shift;
-
- shift += 7;
-
- }
- while (byte & 0x80);
-
- if (length_return != NULL)
- * length_return = num_read;
-
- if (sign && (shift < 32) && (byte & 0x40))
- result |= -1 << shift;
-
- return result;
-}
+/*------------------------------------------------------------*/
+/*--- Read DWARF2 format debug info. ---*/
+/*------------------------------------------------------------*/
/* Structure found in the .debug_line section. */
typedef struct
@@ -705,6 +883,37 @@
UInt last_file_entry;
} SMR;
+
+static
+UInt read_leb128 ( UChar* data, Int* length_return, Int sign )
+{
+ UInt result = 0;
+ UInt num_read = 0;
+ Int shift = 0;
+ UChar byte;
+
+ do
+ {
+ byte = * data ++;
+ num_read ++;
+
+ result |= (byte & 0x7f) << shift;
+
+ shift += 7;
+
+ }
+ while (byte & 0x80);
+
+ if (length_return != NULL)
+ * length_return = num_read;
+
+ if (sign && (shift < 32) && (byte & 0x40))
+ result |= -1 << shift;
+
+ return result;
+}
+
+
static SMR state_machine_regs;
static void
@@ -788,17 +997,14 @@
}
-static Int
-handle_debug_lines (si, section, start)
- SegInfo * si;
- Elf32_Shdr * section;
- UChar * start;
+static
+void read_debuginfo_dwarf2 ( SegInfo* si, UChar* dwarf2, Int dwarf2_sz )
{
DWARF2_External_LineInfo * external;
DWARF2_Internal_LineInfo info;
UChar * standard_opcodes;
- UChar * data = start;
- UChar * end = start + section->sh_size;
+ UChar * data = dwarf2;
+ UChar * end = dwarf2 + dwarf2_sz;
UChar * end_of_sequence;
UInt *fnames = NULL;
@@ -812,23 +1018,22 @@
if (info.li_length == 0xffffffff)
{
- VG_(message) (Vg_UserMsg,"64-bit DWARF line info is not supported yet.");
+ vg_symerr("64-bit DWARF line info is not supported yet.");
break;
}
- if (info.li_length + sizeof (external->li_length) > section->sh_size)
+ if (info.li_length + sizeof (external->li_length) > dwarf2_sz)
{
- VG_(message)
- (Vg_UserMsg,"The line info appears to be corrupt - the section is too small");
- return 0;
+ vg_symerr("DWARF line info appears to be corrupt - the section is too small");
+ return;
}
/* Check its version number. */
info.li_version =*((UShort *) (external->li_version));
if (info.li_version != 2)
{
- VG_(message) (Vg_UserMsg,"Only DWARF version 2 line info is currently supported.");
- return 0;
+ vg_symerr("Only DWARF version 2 line info is currently supported.");
+ return;
}
info.li_prologue_length = *((UInt *)(external->li_prologue_length));
@@ -1005,10 +1210,13 @@
VG_(free)(VG_AR_SYMTAB, fnames);
fnames = NULL;
}
-
- return 1;
}
+
+/*------------------------------------------------------------*/
+/*--- Read info from a .so/exe file. ---*/
+/*------------------------------------------------------------*/
+
/* Read the symbols from the object/exe specified by the SegInfo into
the tables within the supplied SegInfo. */
static
@@ -1017,10 +1225,12 @@
Elf32_Ehdr* ehdr; /* The ELF header */
Elf32_Shdr* shdr; /* The section table */
UChar* sh_strtab; /* The section table's string table */
- struct nlist* stab; /* The .stab table */
+ UChar* stab; /* The .stab table */
UChar* stabstr; /* The .stab string table */
+ UChar* dwarf2; /* The DWARF2 location info table */
Int stab_sz; /* Size in bytes of the .stab table */
Int stabstr_sz; /* Size in bytes of the .stab string table */
+ Int dwarf2_sz; /* Size in bytes of the DWARF2 srcloc table*/
Int fd;
Int i;
Bool ok;
@@ -1028,15 +1238,6 @@
Int n_oimage;
struct vki_stat stat_buf;
- /* for the .stabs reader */
- Int curr_filenmoff;
- Addr curr_fnbaseaddr;
- Char *curr_file_name, *curr_fn_name;
- Int n_stab_entries;
- Int prev_lineno, lineno;
- Int lineno_overflows;
- Bool same_file;
-
oimage = (Addr)NULL;
if (VG_(clo_verbosity) > 1)
VG_(message)(Vg_UserMsg, "Reading syms from %s", si->filename );
@@ -1303,15 +1504,19 @@
}
}
- /* Reading of the "stabs" debug format information, if any. */
+ /* Reading of the stabs and/or dwarf2 debug format information, if
+ any. */
stabstr = NULL;
stab = NULL;
+ dwarf2 = NULL;
stabstr_sz = 0;
stab_sz = 0;
- /* find the .stabstr and .stab sections */
+ dwarf2_sz = 0;
+
+ /* find the .stabstr / .stab / .debug_line sections */
for (i = 0; i < ehdr->e_shnum; i++) {
if (0 == VG_(strcmp)(".stab",sh_strtab + shdr[i].sh_name)) {
- stab = (struct nlist *)(oimage + shdr[i].sh_offset);
+ stab = (UChar*)(oimage + shdr[i].sh_offset);
stab_sz = shdr[i].sh_size;
}
if (0 == VG_(strcmp)(".stabstr",sh_strtab + shdr[i].sh_name)) {
@@ -1319,11 +1524,12 @@
stabstr_sz = shdr[i].sh_size;
}
if (0 == VG_(strcmp)(".debug_line",sh_strtab + shdr[i].sh_name)) {
- handle_debug_lines (si, &shdr[i], (UChar *)(oimage + shdr[i].sh_offset));
+ dwarf2 = (UChar *)(oimage + shdr[i].sh_offset);
+ dwarf2_sz = shdr[i].sh_size;
}
}
- if (stab == NULL || stabstr == NULL) {
+ if ((stab == NULL || stabstr == NULL) && dwarf2 == NULL) {
vg_symerr(" object doesn't have any debug info");
VG_(munmap) ( (void*)oimage, n_oimage );
return;
@@ -1332,185 +1538,25 @@
if ( stab_sz + (UChar*)stab > n_oimage + (UChar*)oimage
|| stabstr_sz + (UChar*)stabstr
> n_oimage + (UChar*)oimage ) {
- vg_symerr(" ELF debug data is beyond image end?!");
+ vg_symerr(" ELF (stabs) debug data is beyond image end?!");
VG_(munmap) ( (void*)oimage, n_oimage );
return;
}
- /* Ok. It all looks plausible. Go on and read debug data.
- stab kinds: 100 N_SO a source file name
- 68 N_SLINE a source line number
- 36 N_FUN start of a function
+ if ( dwarf2_sz + (UChar*)dwarf2 > n_oimage + (UChar*)oimage ) {
+ vg_symerr(" ELF (dwarf2) debug data is beyond image end?!");
+ VG_(munmap) ( (void*)oimage, n_oimage );
+ return;
+ }
- In this loop, we maintain a current file name, updated as
- N_SO/N_SOLs appear, and a current function base address,
- updated as N_FUNs appear. Based on that, address ranges for
- N_SLINEs are calculated, and stuffed into the line info table.
+ /* Looks plausible. Go on and read debug data. */
+ if (stab != NULL && stabstr != NULL) {
+ read_debuginfo_stabs ( si, stab, stab_sz, stabstr, stabstr_sz );
+ }
- Finding the instruction address range covered by an N_SLINE is
- complicated; see the N_SLINE case below.
- */
- curr_filenmoff = addStr(si,"???");
- curr_fnbaseaddr = (Addr)NULL;
- curr_file_name = curr_fn_name = (Char*)NULL;
- lineno = prev_lineno = 0;
- lineno_overflows = 0;
- same_file = True;
-
- n_stab_entries = stab_sz/(int)sizeof(struct nlist);
-
- for (i = 0; i < n_stab_entries; i++) {
-# if 0
- VG_(printf) ( " %2d ", i );
- VG_(printf) ( "type=0x%x othr=%d desc=%d value=0x%x strx=%d %s",
- stab[i].n_type, stab[i].n_other, stab[i].n_desc,
- (int)stab[i].n_value,
- (int)stab[i].n_un.n_strx,
- stabstr + stab[i].n_un.n_strx );
- VG_(printf)("\n");
-# endif
-
- Char *no_fn_name = "???";
-
- switch (stab[i].n_type) {
- UInt next_addr;
-
- /* Two complicated things here:
- * 1. the n_desc field in 'struct n_list' in a.out.h is only 16-bits,
- * which gives a maximum of 65535 lines. We handle files bigger
- * than this by detecting heuristically overflows -- if the line
- * count goes from 65000-odd to 0-odd within the same file, we
- * assume it's an overflow. Once we switch files, we zero the
- * overflow count
- *
- * 2. To compute the instr address range covered by a single line,
- * find the address of the next thing and compute the difference.
- * The approach used depends on what kind of entry/entries
- * follow...
- */
- case N_SLINE: {
- Int this_addr = (UInt)stab[i].n_value;
-
- /* Although stored as a short, neg values really are > 32768, hence
- * the UShort cast. Then we use an Int to handle overflows. */
- prev_lineno = lineno;
- lineno = (Int)((UShort)stab[i].n_desc);
-
- if (prev_lineno > lineno + OVERFLOW_DIFFERENCE && same_file) {
- VG_(message)(Vg_DebugMsg,
- "Line number overflow detected (%d --> %d) in %s",
- prev_lineno, lineno, curr_file_name);
- lineno_overflows++;
- }
- same_file = True;
-
- LOOP:
- if (i+1 >= n_stab_entries) {
- /* If it's the last entry, just guess the range is four; can't
- * do any better */
- next_addr = this_addr + 4;
- } else {
- switch (stab[i+1].n_type) {
- /* Easy, common case: use address of next entry */
- case N_SLINE: case N_SO:
- next_addr = (UInt)stab[i+1].n_value;
- break;
-
- /* Boring one: skip, look for something more useful. */
- case N_RSYM: case N_LSYM: case N_LBRAC: case N_RBRAC:
- case N_STSYM: case N_LCSYM: case N_GSYM:
- i++;
- goto LOOP;
-
- /* Should be an end of fun entry, use its address */
- case N_FUN:
- if ('\0' == * (stabstr + stab[i+1].n_un.n_strx) ) {
- next_addr = (UInt)stab[i+1].n_value;
- } else {
- VG_(message)(Vg_DebugMsg,
- "warning: function %s missing closing "
- "N_FUN stab at entry %d",
- curr_fn_name, i );
- next_addr = this_addr; /* assume zero-size loc */
- }
- break;
-
- /* N_SOL should be followed by an N_SLINE which can be used */
- case N_SOL:
- if (i+2 < n_stab_entries && N_SLINE == stab[i+2].n_type) {
- next_addr = (UInt)stab[i+2].n_value;
- break;
- } else {
- VG_(printf)("unhandled N_SOL stabs case: %d %d %d",
- stab[i+1].n_type, i, n_stab_entries);
- VG_(panic)("unhandled N_SOL stabs case");
- }
-
- default:
- VG_(printf)("unhandled (other) stabs case: %d %d",
- stab[i+1].n_type,i);
- /* VG_(panic)("unhandled (other) stabs case"); */
- next_addr = this_addr + 4;
- break;
- }
- }
-
- addLineInfo ( si, curr_filenmoff, curr_fnbaseaddr + this_addr,
- curr_fnbaseaddr + next_addr,
- lineno + lineno_overflows * LINENO_OVERFLOW, i);
- break;
- }
-
- case N_FUN: {
- if ('\0' != (stabstr + stab[i].n_un.n_strx)[0] ) {
- /* N_FUN with a name -- indicates the start of a fn. */
- curr_fnbaseaddr = si->offset + (Addr)stab[i].n_value;
- curr_fn_name = stabstr + stab[i].n_un.n_strx;
- } else {
- curr_fn_name = no_fn_name;
- }
- break;
- }
-
- case N_SOL:
- if (lineno_overflows != 0) {
- VG_(message)(Vg_UserMsg,
- "Warning: file %s is very big (> 65535 lines) "
- "Line numbers and annotation for this file might "
- "be wrong. Sorry",
- curr_file_name);
- }
- /* fall through! */
- case N_SO:
- lineno_overflows = 0;
-
- /* seems to give lots of locations in header files */
- /* case 130: */ /* BINCL */
- {
- UChar* nm = stabstr + stab[i].n_un.n_strx;
- UInt len = VG_(strlen)(nm);
-
- if (len > 0 && nm[len-1] != '/') {
- curr_filenmoff = addStr ( si, nm );
- curr_file_name = stabstr + stab[i].n_un.n_strx;
- }
- else
- if (len == 0)
- curr_filenmoff = addStr ( si, "?1\0" );
-
- break;
- }
-
-# if 0
- case 162: /* EINCL */
- curr_filenmoff = addStr ( si, "?2\0" );
- break;
-# endif
-
- default:
- break;
- }
- } /* for (i = 0; i < stab_sz/(int)sizeof(struct nlist); i++) */
+ if (dwarf2 != NULL) {
+ read_debuginfo_dwarf2 ( si, dwarf2, dwarf2_sz );
+ }
/* Last, but not least, heave the oimage back overboard. */
VG_(munmap) ( (void*)oimage, n_oimage );