| /* |
| * |
| * Copyright (C) 2015 Valve Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included |
| * in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| * |
| * Author: Chia-I Wu <olvaffe@gmail.com> |
| * Author: Chia-I Wu <olv@lunarg.com> |
| * |
| */ |
| |
| #include "dev.h" |
| #include "format.h" |
| #include "gpu.h" |
| #include "layout.h" |
| |
| enum { |
| LAYOUT_TILING_NONE = 1 << GEN6_TILING_NONE, |
| LAYOUT_TILING_X = 1 << GEN6_TILING_X, |
| LAYOUT_TILING_Y = 1 << GEN6_TILING_Y, |
| LAYOUT_TILING_W = 1 << GEN8_TILING_W, |
| |
| LAYOUT_TILING_ALL = (LAYOUT_TILING_NONE | |
| LAYOUT_TILING_X | |
| LAYOUT_TILING_Y | |
| LAYOUT_TILING_W) |
| }; |
| |
| struct intel_layout_params { |
| struct intel_dev *dev; |
| |
| const struct intel_gpu *gpu; |
| const VkImageCreateInfo *info; |
| bool scanout; |
| |
| bool compressed; |
| |
| unsigned h0, h1; |
| unsigned max_x, max_y; |
| }; |
| |
| static void |
| layout_get_slice_size(const struct intel_layout *layout, |
| const struct intel_layout_params *params, |
| unsigned level, unsigned *width, unsigned *height) |
| { |
| const VkImageCreateInfo *info = params->info; |
| unsigned w, h; |
| |
| w = u_minify(layout->width0, level); |
| h = u_minify(layout->height0, level); |
| |
| /* |
| * From the Sandy Bridge PRM, volume 1 part 1, page 114: |
| * |
| * "The dimensions of the mip maps are first determined by applying the |
| * sizing algorithm presented in Non-Power-of-Two Mipmaps above. Then, |
| * if necessary, they are padded out to compression block boundaries." |
| */ |
| w = u_align(w, layout->block_width); |
| h = u_align(h, layout->block_height); |
| |
| /* |
| * From the Sandy Bridge PRM, volume 1 part 1, page 111: |
| * |
| * "If the surface is multisampled (4x), these values must be adjusted |
| * as follows before proceeding: |
| * |
| * W_L = ceiling(W_L / 2) * 4 |
| * H_L = ceiling(H_L / 2) * 4" |
| * |
| * From the Ivy Bridge PRM, volume 1 part 1, page 108: |
| * |
| * "If the surface is multisampled and it is a depth or stencil surface |
| * or Multisampled Surface StorageFormat in SURFACE_STATE is |
| * MSFMT_DEPTH_STENCIL, W_L and H_L must be adjusted as follows before |
| * proceeding: |
| * |
| * #samples W_L = H_L = |
| * 2 ceiling(W_L / 2) * 4 HL [no adjustment] |
| * 4 ceiling(W_L / 2) * 4 ceiling(H_L / 2) * 4 |
| * 8 ceiling(W_L / 2) * 8 ceiling(H_L / 2) * 4 |
| * 16 ceiling(W_L / 2) * 8 ceiling(H_L / 2) * 8" |
| * |
| * For interleaved samples (4x), where pixels |
| * |
| * (x, y ) (x+1, y ) |
| * (x, y+1) (x+1, y+1) |
| * |
| * would be is occupied by |
| * |
| * (x, y , si0) (x+1, y , si0) (x, y , si1) (x+1, y , si1) |
| * (x, y+1, si0) (x+1, y+1, si0) (x, y+1, si1) (x+1, y+1, si1) |
| * (x, y , si2) (x+1, y , si2) (x, y , si3) (x+1, y , si3) |
| * (x, y+1, si2) (x+1, y+1, si2) (x, y+1, si3) (x+1, y+1, si3) |
| * |
| * Thus the need to |
| * |
| * w = align(w, 2) * 2; |
| * y = align(y, 2) * 2; |
| */ |
| if (layout->interleaved_samples) { |
| switch (info->samples) { |
| case VK_SAMPLE_COUNT_1_BIT: |
| break; |
| case VK_SAMPLE_COUNT_2_BIT: |
| w = u_align(w, 2) * 2; |
| break; |
| case VK_SAMPLE_COUNT_4_BIT: |
| w = u_align(w, 2) * 2; |
| h = u_align(h, 2) * 2; |
| break; |
| case VK_SAMPLE_COUNT_8_BIT: |
| w = u_align(w, 2) * 4; |
| h = u_align(h, 2) * 2; |
| break; |
| case VK_SAMPLE_COUNT_16_BIT: |
| w = u_align(w, 2) * 4; |
| h = u_align(h, 2) * 4; |
| break; |
| default: |
| assert(!"unsupported sample count"); |
| break; |
| } |
| } |
| |
| /* |
| * From the Ivy Bridge PRM, volume 1 part 1, page 108: |
| * |
| * "For separate stencil buffer, the width must be mutiplied by 2 and |
| * height divided by 2..." |
| * |
| * To make things easier (for transfer), we will just double the stencil |
| * stride in 3DSTATE_STENCIL_BUFFER. |
| */ |
| w = u_align(w, layout->align_i); |
| h = u_align(h, layout->align_j); |
| |
| *width = w; |
| *height = h; |
| } |
| |
| static unsigned |
| layout_get_num_layers(const struct intel_layout *layout, |
| const struct intel_layout_params *params) |
| { |
| const VkImageCreateInfo *info = params->info; |
| unsigned num_layers = info->arrayLayers; |
| |
| /* samples of the same index are stored in a layer */ |
| if (info->samples != VK_SAMPLE_COUNT_1_BIT && !layout->interleaved_samples) |
| num_layers *= (uint32_t) info->samples; |
| |
| return num_layers; |
| } |
| |
| static void |
| layout_init_layer_height(struct intel_layout *layout, |
| struct intel_layout_params *params) |
| { |
| const VkImageCreateInfo *info = params->info; |
| unsigned num_layers; |
| |
| if (layout->walk != INTEL_LAYOUT_WALK_LAYER) |
| return; |
| |
| num_layers = layout_get_num_layers(layout, params); |
| if (num_layers <= 1) |
| return; |
| |
| /* |
| * From the Sandy Bridge PRM, volume 1 part 1, page 115: |
| * |
| * "The following equation is used for surface formats other than |
| * compressed textures: |
| * |
| * QPitch = (h0 + h1 + 11j)" |
| * |
| * "The equation for compressed textures (BC* and FXT1 surface formats) |
| * follows: |
| * |
| * QPitch = (h0 + h1 + 11j) / 4" |
| * |
| * "[DevSNB] Errata: Sampler MSAA Qpitch will be 4 greater than the |
| * value calculated in the equation above, for every other odd Surface |
| * Height starting from 1 i.e. 1,5,9,13" |
| * |
| * From the Ivy Bridge PRM, volume 1 part 1, page 111-112: |
| * |
| * "If Surface Array Spacing is set to ARYSPC_FULL (note that the depth |
| * buffer and stencil buffer have an implied value of ARYSPC_FULL): |
| * |
| * QPitch = (h0 + h1 + 12j) |
| * QPitch = (h0 + h1 + 12j) / 4 (compressed) |
| * |
| * (There are many typos or missing words here...)" |
| * |
| * To access the N-th slice, an offset of (Stride * QPitch * N) is added to |
| * the base address. The PRM divides QPitch by 4 for compressed formats |
| * because the block height for those formats are 4, and it wants QPitch to |
| * mean the number of memory rows, as opposed to texel rows, between |
| * slices. Since we use texel rows everywhere, we do not need to divide |
| * QPitch by 4. |
| */ |
| layout->layer_height = params->h0 + params->h1 + |
| ((intel_gpu_gen(params->gpu) >= INTEL_GEN(7)) ? 12 : 11) * layout->align_j; |
| |
| if (intel_gpu_gen(params->gpu) == INTEL_GEN(6) && |
| info->samples != VK_SAMPLE_COUNT_1_BIT && |
| layout->height0 % 4 == 1) |
| layout->layer_height += 4; |
| |
| params->max_y += layout->layer_height * (num_layers - 1); |
| } |
| |
| static void |
| layout_init_lods(struct intel_layout *layout, |
| struct intel_layout_params *params) |
| { |
| const VkImageCreateInfo *info = params->info; |
| unsigned cur_x, cur_y; |
| unsigned lv; |
| |
| cur_x = 0; |
| cur_y = 0; |
| for (lv = 0; lv < info->mipLevels; lv++) { |
| unsigned lod_w, lod_h; |
| |
| layout_get_slice_size(layout, params, lv, &lod_w, &lod_h); |
| |
| layout->lods[lv].x = cur_x; |
| layout->lods[lv].y = cur_y; |
| layout->lods[lv].slice_width = lod_w; |
| layout->lods[lv].slice_height = lod_h; |
| |
| switch (layout->walk) { |
| case INTEL_LAYOUT_WALK_LOD: |
| lod_h *= layout_get_num_layers(layout, params); |
| if (lv == 1) |
| cur_x += lod_w; |
| else |
| cur_y += lod_h; |
| |
| /* every LOD begins at tile boundaries */ |
| if (info->mipLevels > 1) { |
| assert(layout->format == VK_FORMAT_S8_UINT); |
| cur_x = u_align(cur_x, 64); |
| cur_y = u_align(cur_y, 64); |
| } |
| break; |
| case INTEL_LAYOUT_WALK_LAYER: |
| /* MIPLAYOUT_BELOW */ |
| if (lv == 1) |
| cur_x += lod_w; |
| else |
| cur_y += lod_h; |
| break; |
| case INTEL_LAYOUT_WALK_3D: |
| { |
| const unsigned num_slices = u_minify(info->extent.depth, lv); |
| const unsigned num_slices_per_row = 1 << lv; |
| const unsigned num_rows = |
| (num_slices + num_slices_per_row - 1) / num_slices_per_row; |
| |
| lod_w *= num_slices_per_row; |
| lod_h *= num_rows; |
| |
| cur_y += lod_h; |
| } |
| break; |
| } |
| |
| if (params->max_x < layout->lods[lv].x + lod_w) |
| params->max_x = layout->lods[lv].x + lod_w; |
| if (params->max_y < layout->lods[lv].y + lod_h) |
| params->max_y = layout->lods[lv].y + lod_h; |
| } |
| |
| if (layout->walk == INTEL_LAYOUT_WALK_LAYER) { |
| params->h0 = layout->lods[0].slice_height; |
| |
| if (info->mipLevels > 1) |
| params->h1 = layout->lods[1].slice_height; |
| else |
| layout_get_slice_size(layout, params, 1, &cur_x, ¶ms->h1); |
| } |
| } |
| |
| static void |
| layout_init_alignments(struct intel_layout *layout, |
| struct intel_layout_params *params) |
| { |
| const VkImageCreateInfo *info = params->info; |
| |
| /* |
| * From the Sandy Bridge PRM, volume 1 part 1, page 113: |
| * |
| * "surface format align_i align_j |
| * YUV 4:2:2 formats 4 *see below |
| * BC1-5 4 4 |
| * FXT1 8 4 |
| * all other formats 4 *see below" |
| * |
| * "- align_j = 4 for any depth buffer |
| * - align_j = 2 for separate stencil buffer |
| * - align_j = 4 for any render target surface is multisampled (4x) |
| * - align_j = 4 for any render target surface with Surface Vertical |
| * Alignment = VALIGN_4 |
| * - align_j = 2 for any render target surface with Surface Vertical |
| * Alignment = VALIGN_2 |
| * - align_j = 2 for all other render target surface |
| * - align_j = 2 for any sampling engine surface with Surface Vertical |
| * Alignment = VALIGN_2 |
| * - align_j = 4 for any sampling engine surface with Surface Vertical |
| * Alignment = VALIGN_4" |
| * |
| * From the Sandy Bridge PRM, volume 4 part 1, page 86: |
| * |
| * "This field (Surface Vertical Alignment) must be set to VALIGN_2 if |
| * the Surface Format is 96 bits per element (BPE)." |
| * |
| * They can be rephrased as |
| * |
| * align_i align_j |
| * compressed formats block width block height |
| * PIPE_FORMAT_S8_UINT 4 2 |
| * other depth/stencil formats 4 4 |
| * 4x multisampled 4 4 |
| * bpp 96 4 2 |
| * others 4 2 or 4 |
| */ |
| |
| /* |
| * From the Ivy Bridge PRM, volume 1 part 1, page 110: |
| * |
| * "surface defined by surface format align_i align_j |
| * 3DSTATE_DEPTH_BUFFER D16_UNORM 8 4 |
| * not D16_UNORM 4 4 |
| * 3DSTATE_STENCIL_BUFFER N/A 8 8 |
| * SURFACE_STATE BC*, ETC*, EAC* 4 4 |
| * FXT1 8 4 |
| * all others (set by SURFACE_STATE)" |
| * |
| * From the Ivy Bridge PRM, volume 4 part 1, page 63: |
| * |
| * "- This field (Surface Vertical Aligment) is intended to be set to |
| * VALIGN_4 if the surface was rendered as a depth buffer, for a |
| * multisampled (4x) render target, or for a multisampled (8x) |
| * render target, since these surfaces support only alignment of 4. |
| * - Use of VALIGN_4 for other surfaces is supported, but uses more |
| * memory. |
| * - This field must be set to VALIGN_4 for all tiled Y Render Target |
| * surfaces. |
| * - Value of 1 is not supported for format YCRCB_NORMAL (0x182), |
| * YCRCB_SWAPUVY (0x183), YCRCB_SWAPUV (0x18f), YCRCB_SWAPY (0x190) |
| * - If Number of Multisamples is not MULTISAMPLECOUNT_1, this field |
| * must be set to VALIGN_4." |
| * - VALIGN_4 is not supported for surface format R32G32B32_FLOAT." |
| * |
| * "- This field (Surface Horizontal Aligment) is intended to be set to |
| * HALIGN_8 only if the surface was rendered as a depth buffer with |
| * Z16 format or a stencil buffer, since these surfaces support only |
| * alignment of 8. |
| * - Use of HALIGN_8 for other surfaces is supported, but uses more |
| * memory. |
| * - This field must be set to HALIGN_4 if the Surface Format is BC*. |
| * - This field must be set to HALIGN_8 if the Surface Format is |
| * FXT1." |
| * |
| * They can be rephrased as |
| * |
| * align_i align_j |
| * compressed formats block width block height |
| * PIPE_FORMAT_Z16_UNORM 8 4 |
| * PIPE_FORMAT_S8_UINT 8 8 |
| * other depth/stencil formats 4 4 |
| * 2x or 4x multisampled 4 or 8 4 |
| * tiled Y 4 or 8 4 (if rt) |
| * PIPE_FORMAT_R32G32B32_FLOAT 4 or 8 2 |
| * others 4 or 8 2 or 4 |
| */ |
| |
| if (params->compressed) { |
| /* this happens to be the case */ |
| layout->align_i = layout->block_width; |
| layout->align_j = layout->block_height; |
| } else if (info->usage & VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT) { |
| if (intel_gpu_gen(params->gpu) >= INTEL_GEN(7)) { |
| switch (layout->format) { |
| case VK_FORMAT_D16_UNORM: |
| layout->align_i = 8; |
| layout->align_j = 4; |
| break; |
| case VK_FORMAT_S8_UINT: |
| layout->align_i = 8; |
| layout->align_j = 8; |
| break; |
| default: |
| layout->align_i = 4; |
| layout->align_j = 4; |
| break; |
| } |
| } else { |
| switch (layout->format) { |
| case VK_FORMAT_S8_UINT: |
| layout->align_i = 4; |
| layout->align_j = 2; |
| break; |
| default: |
| layout->align_i = 4; |
| layout->align_j = 4; |
| break; |
| } |
| } |
| } else { |
| const bool valign_4 = |
| (info->samples != VK_SAMPLE_COUNT_1_BIT) || |
| (intel_gpu_gen(params->gpu) >= INTEL_GEN(8)) || |
| (intel_gpu_gen(params->gpu) >= INTEL_GEN(7) && |
| layout->tiling == GEN6_TILING_Y && |
| (info->usage & VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT)); |
| |
| if (intel_gpu_gen(params->gpu) >= INTEL_GEN(7) && |
| intel_gpu_gen(params->gpu) <= INTEL_GEN(7.5) && valign_4) |
| assert(layout->format != VK_FORMAT_R32G32B32_SFLOAT); |
| |
| layout->align_i = 4; |
| layout->align_j = (valign_4) ? 4 : 2; |
| } |
| |
| /* |
| * the fact that align i and j are multiples of block width and height |
| * respectively is what makes the size of the bo a multiple of the block |
| * size, slices start at block boundaries, and many of the computations |
| * work. |
| */ |
| assert(layout->align_i % layout->block_width == 0); |
| assert(layout->align_j % layout->block_height == 0); |
| |
| /* make sure u_align() works */ |
| assert(u_is_pow2(layout->align_i) && |
| u_is_pow2(layout->align_j)); |
| assert(u_is_pow2(layout->block_width) && |
| u_is_pow2(layout->block_height)); |
| } |
| |
| static unsigned |
| layout_get_valid_tilings(const struct intel_layout *layout, |
| const struct intel_layout_params *params) |
| { |
| const VkImageCreateInfo *info = params->info; |
| const VkFormat format = layout->format; |
| unsigned valid_tilings = LAYOUT_TILING_ALL; |
| |
| /* |
| * From the Sandy Bridge PRM, volume 1 part 2, page 32: |
| * |
| * "Display/Overlay Y-Major not supported. |
| * X-Major required for Async Flips" |
| */ |
| if (params->scanout) |
| valid_tilings &= LAYOUT_TILING_X; |
| |
| if (info->tiling == VK_IMAGE_TILING_LINEAR) |
| valid_tilings &= LAYOUT_TILING_NONE; |
| |
| /* |
| * From the Sandy Bridge PRM, volume 2 part 1, page 318: |
| * |
| * "[DevSNB+]: This field (Tiled Surface) must be set to TRUE. Linear |
| * Depth Buffer is not supported." |
| * |
| * "The Depth Buffer, if tiled, must use Y-Major tiling." |
| * |
| * From the Sandy Bridge PRM, volume 1 part 2, page 22: |
| * |
| * "W-Major Tile Format is used for separate stencil." |
| */ |
| if (info->usage & VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT) { |
| switch (format) { |
| case VK_FORMAT_S8_UINT: |
| valid_tilings &= LAYOUT_TILING_W; |
| break; |
| default: |
| valid_tilings &= LAYOUT_TILING_Y; |
| break; |
| } |
| } |
| |
| if (info->usage & VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT) { |
| /* |
| * From the Sandy Bridge PRM, volume 1 part 2, page 32: |
| * |
| * "NOTE: 128BPE Format Color buffer ( render target ) MUST be |
| * either TileX or Linear." |
| * |
| * From the Haswell PRM, volume 5, page 32: |
| * |
| * "NOTE: 128 BPP format color buffer (render target) supports |
| * Linear, TiledX and TiledY." |
| */ |
| if (intel_gpu_gen(params->gpu) < INTEL_GEN(7.5) && layout->block_size == 16) |
| valid_tilings &= ~LAYOUT_TILING_Y; |
| |
| /* |
| * From the Ivy Bridge PRM, volume 4 part 1, page 63: |
| * |
| * "This field (Surface Vertical Aligment) must be set to VALIGN_4 |
| * for all tiled Y Render Target surfaces." |
| * |
| * "VALIGN_4 is not supported for surface format R32G32B32_FLOAT." |
| */ |
| if (intel_gpu_gen(params->gpu) >= INTEL_GEN(7) && |
| intel_gpu_gen(params->gpu) <= INTEL_GEN(7.5) && |
| layout->format == VK_FORMAT_R32G32B32_SFLOAT) |
| valid_tilings &= ~LAYOUT_TILING_Y; |
| |
| valid_tilings &= ~LAYOUT_TILING_W; |
| } |
| |
| if (info->usage & VK_IMAGE_USAGE_SAMPLED_BIT) { |
| if (intel_gpu_gen(params->gpu) < INTEL_GEN(8)) |
| valid_tilings &= ~LAYOUT_TILING_W; |
| } |
| |
| /* no conflicting binding flags */ |
| assert(valid_tilings); |
| |
| return valid_tilings; |
| } |
| |
| static void |
| layout_init_tiling(struct intel_layout *layout, |
| struct intel_layout_params *params) |
| { |
| const VkImageCreateInfo *info = params->info; |
| unsigned preferred_tilings; |
| |
| layout->valid_tilings = layout_get_valid_tilings(layout, params); |
| |
| preferred_tilings = layout->valid_tilings; |
| |
| /* no fencing nor BLT support */ |
| if (preferred_tilings & ~LAYOUT_TILING_W) |
| preferred_tilings &= ~LAYOUT_TILING_W; |
| |
| if (info->usage & (VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT | |
| VK_IMAGE_USAGE_SAMPLED_BIT)) { |
| /* |
| * heuristically set a minimum width/height for enabling tiling |
| */ |
| if (layout->width0 < 64 && (preferred_tilings & ~LAYOUT_TILING_X)) |
| preferred_tilings &= ~LAYOUT_TILING_X; |
| |
| if ((layout->width0 < 32 || layout->height0 < 16) && |
| (layout->width0 < 16 || layout->height0 < 32) && |
| (preferred_tilings & ~LAYOUT_TILING_Y)) |
| preferred_tilings &= ~LAYOUT_TILING_Y; |
| } else { |
| /* force linear if we are not sure where the texture is bound to */ |
| if (preferred_tilings & LAYOUT_TILING_NONE) |
| preferred_tilings &= LAYOUT_TILING_NONE; |
| } |
| |
| /* prefer tiled over linear */ |
| if (preferred_tilings & LAYOUT_TILING_Y) |
| layout->tiling = GEN6_TILING_Y; |
| else if (preferred_tilings & LAYOUT_TILING_X) |
| layout->tiling = GEN6_TILING_X; |
| else if (preferred_tilings & LAYOUT_TILING_W) |
| layout->tiling = GEN8_TILING_W; |
| else |
| layout->tiling = GEN6_TILING_NONE; |
| } |
| |
| static void |
| layout_init_walk_gen7(struct intel_layout *layout, |
| struct intel_layout_params *params) |
| { |
| const VkImageCreateInfo *info = params->info; |
| |
| /* |
| * It is not explicitly states, but render targets are expected to be |
| * UMS/CMS (samples non-interleaved) and depth/stencil buffers are expected |
| * to be IMS (samples interleaved). |
| * |
| * See "Multisampled Surface Storage Format" field of SURFACE_STATE. |
| */ |
| if (info->usage & VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT) { |
| /* |
| * From the Ivy Bridge PRM, volume 1 part 1, page 111: |
| * |
| * "note that the depth buffer and stencil buffer have an implied |
| * value of ARYSPC_FULL" |
| */ |
| layout->walk = (info->imageType == VK_IMAGE_TYPE_3D) ? |
| INTEL_LAYOUT_WALK_3D : INTEL_LAYOUT_WALK_LAYER; |
| |
| layout->interleaved_samples = true; |
| } else { |
| /* |
| * From the Ivy Bridge PRM, volume 4 part 1, page 66: |
| * |
| * "If Multisampled Surface Storage Format is MSFMT_MSS and Number |
| * of Multisamples is not MULTISAMPLECOUNT_1, this field (Surface |
| * Array Spacing) must be set to ARYSPC_LOD0." |
| * |
| * As multisampled resources are not mipmapped, we never use |
| * ARYSPC_FULL for them. |
| */ |
| if (info->samples != VK_SAMPLE_COUNT_1_BIT) |
| assert(info->mipLevels == 1); |
| |
| layout->walk = |
| (info->imageType == VK_IMAGE_TYPE_3D) ? INTEL_LAYOUT_WALK_3D : |
| (info->mipLevels > 1) ? INTEL_LAYOUT_WALK_LAYER : |
| INTEL_LAYOUT_WALK_LOD; |
| |
| layout->interleaved_samples = false; |
| } |
| } |
| |
| static void |
| layout_init_walk_gen6(struct intel_layout *layout, |
| struct intel_layout_params *params) |
| { |
| /* |
| * From the Sandy Bridge PRM, volume 1 part 1, page 115: |
| * |
| * "The separate stencil buffer does not support mip mapping, thus the |
| * storage for LODs other than LOD 0 is not needed. The following |
| * QPitch equation applies only to the separate stencil buffer: |
| * |
| * QPitch = h_0" |
| * |
| * GEN6 does not support compact spacing otherwise. |
| */ |
| layout->walk = |
| (params->info->imageType == VK_IMAGE_TYPE_3D) ? INTEL_LAYOUT_WALK_3D : |
| (layout->format == VK_FORMAT_S8_UINT) ? INTEL_LAYOUT_WALK_LOD : |
| INTEL_LAYOUT_WALK_LAYER; |
| |
| /* GEN6 supports only interleaved samples */ |
| layout->interleaved_samples = true; |
| } |
| |
| static void |
| layout_init_walk(struct intel_layout *layout, |
| struct intel_layout_params *params) |
| { |
| if (intel_gpu_gen(params->gpu) >= INTEL_GEN(7)) |
| layout_init_walk_gen7(layout, params); |
| else |
| layout_init_walk_gen6(layout, params); |
| } |
| |
| static void |
| layout_init_size_and_format(struct intel_layout *layout, |
| struct intel_layout_params *params) |
| { |
| const VkImageCreateInfo *info = params->info; |
| VkFormat format = info->format; |
| bool require_separate_stencil = false; |
| |
| layout->width0 = info->extent.width; |
| layout->height0 = info->extent.height; |
| |
| /* |
| * From the Sandy Bridge PRM, volume 2 part 1, page 317: |
| * |
| * "This field (Separate Stencil Buffer Enable) must be set to the same |
| * value (enabled or disabled) as Hierarchical Depth Buffer Enable." |
| * |
| * GEN7+ requires separate stencil buffers. |
| */ |
| if (info->usage & VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT) { |
| if (intel_gpu_gen(params->gpu) >= INTEL_GEN(7)) |
| require_separate_stencil = true; |
| else |
| require_separate_stencil = (layout->aux == INTEL_LAYOUT_AUX_HIZ); |
| } |
| |
| switch (format) { |
| case VK_FORMAT_D24_UNORM_S8_UINT: |
| if (require_separate_stencil) { |
| format = VK_FORMAT_X8_D24_UNORM_PACK32; |
| layout->separate_stencil = true; |
| } |
| break; |
| case VK_FORMAT_D32_SFLOAT_S8_UINT: |
| if (require_separate_stencil) { |
| format = VK_FORMAT_D32_SFLOAT; |
| layout->separate_stencil = true; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| layout->format = format; |
| layout->block_width = icd_format_get_block_width(format); |
| layout->block_height = layout->block_width; |
| layout->block_size = icd_format_get_size(format); |
| |
| params->compressed = icd_format_is_compressed(format); |
| } |
| |
| static bool |
| layout_want_mcs(struct intel_layout *layout, |
| struct intel_layout_params *params) |
| { |
| const VkImageCreateInfo *info = params->info; |
| bool want_mcs = false; |
| |
| /* MCS is for RT on GEN7+ */ |
| if (intel_gpu_gen(params->gpu) < INTEL_GEN(7)) |
| return false; |
| |
| if (info->imageType != VK_IMAGE_TYPE_2D || |
| !(info->usage & VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT)) |
| return false; |
| |
| /* |
| * From the Ivy Bridge PRM, volume 4 part 1, page 77: |
| * |
| * "For Render Target and Sampling Engine Surfaces:If the surface is |
| * multisampled (Number of Multisamples any value other than |
| * MULTISAMPLECOUNT_1), this field (MCS Enable) must be enabled." |
| * |
| * "This field must be set to 0 for all SINT MSRTs when all RT channels |
| * are not written" |
| */ |
| if (info->samples != VK_SAMPLE_COUNT_1_BIT && |
| !icd_format_is_int(info->format)) { |
| want_mcs = true; |
| } else if (info->samples == VK_SAMPLE_COUNT_1_BIT) { |
| /* |
| * From the Ivy Bridge PRM, volume 2 part 1, page 326: |
| * |
| * "When MCS is buffer is used for color clear of non-multisampler |
| * render target, the following restrictions apply. |
| * - Support is limited to tiled render targets. |
| * - Support is for non-mip-mapped and non-array surface types |
| * only. |
| * - Clear is supported only on the full RT; i.e., no partial clear |
| * or overlapping clears. |
| * - MCS buffer for non-MSRT is supported only for RT formats |
| * 32bpp, 64bpp and 128bpp. |
| * ..." |
| */ |
| if (layout->tiling != GEN6_TILING_NONE && |
| info->mipLevels == 1 && info->arrayLayers == 1) { |
| switch (layout->block_size) { |
| case 4: |
| case 8: |
| case 16: |
| want_mcs = true; |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| |
| return want_mcs; |
| } |
| |
| static bool |
| layout_want_hiz(const struct intel_layout *layout, |
| const struct intel_layout_params *params) |
| { |
| const VkImageCreateInfo *info = params->info; |
| |
| if (intel_debug & INTEL_DEBUG_NOHIZ) |
| return false; |
| |
| if (!(info->usage & VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT)) |
| return false; |
| |
| if (!intel_format_has_depth(params->gpu, info->format)) |
| return false; |
| |
| /* |
| * HiZ implies separate stencil on Gen6. We do not want to copy stencils |
| * values between combined and separate stencil buffers when HiZ is enabled |
| * or disabled. |
| */ |
| if (intel_gpu_gen(params->gpu) == INTEL_GEN(6)) |
| return false; |
| |
| return true; |
| } |
| |
| static void |
| layout_init_aux(struct intel_layout *layout, |
| struct intel_layout_params *params) |
| { |
| if (layout_want_hiz(layout, params)) |
| layout->aux = INTEL_LAYOUT_AUX_HIZ; |
| else if (layout_want_mcs(layout, params)) |
| layout->aux = INTEL_LAYOUT_AUX_MCS; |
| } |
| |
| static void |
| layout_align(struct intel_layout *layout, struct intel_layout_params *params) |
| { |
| const VkImageCreateInfo *info = params->info; |
| int align_w = 1, align_h = 1, pad_h = 0; |
| |
| /* |
| * From the Sandy Bridge PRM, volume 1 part 1, page 118: |
| * |
| * "To determine the necessary padding on the bottom and right side of |
| * the surface, refer to the table in Section 7.18.3.4 for the i and j |
| * parameters for the surface format in use. The surface must then be |
| * extended to the next multiple of the alignment unit size in each |
| * dimension, and all texels contained in this extended surface must |
| * have valid GTT entries." |
| * |
| * "For cube surfaces, an additional two rows of padding are required |
| * at the bottom of the surface. This must be ensured regardless of |
| * whether the surface is stored tiled or linear. This is due to the |
| * potential rotation of cache line orientation from memory to cache." |
| * |
| * "For compressed textures (BC* and FXT1 surface formats), padding at |
| * the bottom of the surface is to an even compressed row, which is |
| * equal to a multiple of 8 uncompressed texel rows. Thus, for padding |
| * purposes, these surfaces behave as if j = 8 only for surface |
| * padding purposes. The value of 4 for j still applies for mip level |
| * alignment and QPitch calculation." |
| */ |
| if (info->usage & VK_IMAGE_USAGE_SAMPLED_BIT) { |
| if (align_w < layout->align_i) |
| align_w = layout->align_i; |
| if (align_h < layout->align_j) |
| align_h = layout->align_j; |
| |
| /* in case it is used as a cube */ |
| if (info->imageType == VK_IMAGE_TYPE_2D) |
| pad_h += 2; |
| |
| if (params->compressed && align_h < layout->align_j * 2) |
| align_h = layout->align_j * 2; |
| } |
| |
| /* |
| * From the Sandy Bridge PRM, volume 1 part 1, page 118: |
| * |
| * "If the surface contains an odd number of rows of data, a final row |
| * below the surface must be allocated." |
| */ |
| if ((info->usage & VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT) && align_h < 2) |
| align_h = 2; |
| |
| /* |
| * Depth Buffer Clear/Resolve works in 8x4 sample blocks. In |
| * intel_texture_can_enable_hiz(), we always return true for the first slice. |
| * To avoid out-of-bound access, we have to pad. |
| */ |
| if (layout->aux == INTEL_LAYOUT_AUX_HIZ && |
| info->mipLevels == 1 && |
| info->arrayLayers == 1 && |
| info->extent.depth == 1) { |
| if (align_w < 8) |
| align_w = 8; |
| if (align_h < 4) |
| align_h = 4; |
| } |
| |
| params->max_x = u_align(params->max_x, align_w); |
| params->max_y = u_align(params->max_y + pad_h, align_h); |
| } |
| |
| /* note that this may force the texture to be linear */ |
| static void |
| layout_calculate_bo_size(struct intel_layout *layout, |
| struct intel_layout_params *params) |
| { |
| assert(params->max_x % layout->block_width == 0); |
| assert(params->max_y % layout->block_height == 0); |
| assert(layout->layer_height % layout->block_height == 0); |
| |
| layout->bo_stride = |
| (params->max_x / layout->block_width) * layout->block_size; |
| layout->bo_height = params->max_y / layout->block_height; |
| |
| while (true) { |
| unsigned w = layout->bo_stride, h = layout->bo_height; |
| unsigned align_w, align_h; |
| |
| /* |
| * From the Haswell PRM, volume 5, page 163: |
| * |
| * "For linear surfaces, additional padding of 64 bytes is required |
| * at the bottom of the surface. This is in addition to the padding |
| * required above." |
| */ |
| if (intel_gpu_gen(params->gpu) >= INTEL_GEN(7.5) && |
| (params->info->usage & VK_IMAGE_USAGE_SAMPLED_BIT) && |
| layout->tiling == GEN6_TILING_NONE) |
| h += (64 + layout->bo_stride - 1) / layout->bo_stride; |
| |
| /* |
| * From the Sandy Bridge PRM, volume 4 part 1, page 81: |
| * |
| * "- For linear render target surfaces, the pitch must be a |
| * multiple of the element size for non-YUV surface formats. |
| * Pitch must be a multiple of 2 * element size for YUV surface |
| * formats. |
| * - For other linear surfaces, the pitch can be any multiple of |
| * bytes. |
| * - For tiled surfaces, the pitch must be a multiple of the tile |
| * width." |
| * |
| * Different requirements may exist when the bo is used in different |
| * places, but our alignments here should be good enough that we do not |
| * need to check layout->info->usage. |
| */ |
| switch (layout->tiling) { |
| case GEN6_TILING_X: |
| align_w = 512; |
| align_h = 8; |
| break; |
| case GEN6_TILING_Y: |
| align_w = 128; |
| align_h = 32; |
| break; |
| case GEN8_TILING_W: |
| /* |
| * From the Sandy Bridge PRM, volume 1 part 2, page 22: |
| * |
| * "A 4KB tile is subdivided into 8-high by 8-wide array of |
| * Blocks for W-Major Tiles (W Tiles). Each Block is 8 rows by 8 |
| * bytes." |
| */ |
| align_w = 64; |
| align_h = 64; |
| break; |
| default: |
| assert(layout->tiling == GEN6_TILING_NONE); |
| /* some good enough values */ |
| align_w = 64; |
| align_h = 2; |
| break; |
| } |
| |
| w = u_align(w, align_w); |
| h = u_align(h, align_h); |
| |
| /* make sure the bo is mappable */ |
| if (layout->tiling != GEN6_TILING_NONE) { |
| /* |
| * Usually only the first 256MB of the GTT is mappable. |
| * |
| * See also how intel_context::max_gtt_map_object_size is calculated. |
| */ |
| const size_t mappable_gtt_size = 256 * 1024 * 1024; |
| |
| /* |
| * Be conservative. We may be able to switch from VALIGN_4 to |
| * VALIGN_2 if the layout was Y-tiled, but let's keep it simple. |
| */ |
| if (mappable_gtt_size / w / 4 < h) { |
| if (layout->valid_tilings & LAYOUT_TILING_NONE) { |
| layout->tiling = GEN6_TILING_NONE; |
| /* MCS support for non-MSRTs is limited to tiled RTs */ |
| if (layout->aux == INTEL_LAYOUT_AUX_MCS && |
| params->info->samples == VK_SAMPLE_COUNT_1_BIT) |
| layout->aux = INTEL_LAYOUT_AUX_NONE; |
| |
| continue; |
| } else { |
| /* mapping will fail */ |
| } |
| } |
| } |
| |
| layout->bo_stride = w; |
| layout->bo_height = h; |
| break; |
| } |
| } |
| |
| static void |
| layout_calculate_hiz_size(struct intel_layout *layout, |
| struct intel_layout_params *params) |
| { |
| const VkImageCreateInfo *info = params->info; |
| const unsigned hz_align_j = 8; |
| enum intel_layout_walk_type hz_walk; |
| unsigned hz_width, hz_height, lv; |
| unsigned hz_clear_w, hz_clear_h; |
| |
| assert(layout->aux == INTEL_LAYOUT_AUX_HIZ); |
| |
| assert(layout->walk == INTEL_LAYOUT_WALK_LAYER || |
| layout->walk == INTEL_LAYOUT_WALK_3D); |
| |
| /* |
| * From the Sandy Bridge PRM, volume 2 part 1, page 312: |
| * |
| * "The hierarchical depth buffer does not support the LOD field, it is |
| * assumed by hardware to be zero. A separate hierarachical depth |
| * buffer is required for each LOD used, and the corresponding |
| * buffer's state delivered to hardware each time a new depth buffer |
| * state with modified LOD is delivered." |
| * |
| * We will put all LODs in a single bo with INTEL_LAYOUT_WALK_LOD. |
| */ |
| if (intel_gpu_gen(params->gpu) >= INTEL_GEN(7)) |
| hz_walk = layout->walk; |
| else |
| hz_walk = INTEL_LAYOUT_WALK_LOD; |
| |
| /* |
| * See the Sandy Bridge PRM, volume 2 part 1, page 312, and the Ivy Bridge |
| * PRM, volume 2 part 1, page 312-313. |
| * |
| * It seems HiZ buffer is aligned to 8x8, with every two rows packed into a |
| * memory row. |
| */ |
| switch (hz_walk) { |
| case INTEL_LAYOUT_WALK_LOD: |
| { |
| unsigned lod_tx[INTEL_LAYOUT_MAX_LEVELS]; |
| unsigned lod_ty[INTEL_LAYOUT_MAX_LEVELS]; |
| unsigned cur_tx, cur_ty; |
| |
| /* figure out the tile offsets of LODs */ |
| hz_width = 0; |
| hz_height = 0; |
| cur_tx = 0; |
| cur_ty = 0; |
| for (lv = 0; lv < info->mipLevels; lv++) { |
| unsigned tw, th; |
| |
| lod_tx[lv] = cur_tx; |
| lod_ty[lv] = cur_ty; |
| |
| tw = u_align(layout->lods[lv].slice_width, 16); |
| th = u_align(layout->lods[lv].slice_height, hz_align_j) * |
| info->arrayLayers / 2; |
| /* convert to Y-tiles */ |
| tw = u_align(tw, 128) / 128; |
| th = u_align(th, 32) / 32; |
| |
| if (hz_width < cur_tx + tw) |
| hz_width = cur_tx + tw; |
| if (hz_height < cur_ty + th) |
| hz_height = cur_ty + th; |
| |
| if (lv == 1) |
| cur_tx += tw; |
| else |
| cur_ty += th; |
| } |
| |
| /* convert tile offsets to memory offsets */ |
| for (lv = 0; lv < info->mipLevels; lv++) { |
| layout->aux_offsets[lv] = |
| (lod_ty[lv] * hz_width + lod_tx[lv]) * 4096; |
| } |
| hz_width *= 128; |
| hz_height *= 32; |
| } |
| break; |
| case INTEL_LAYOUT_WALK_LAYER: |
| { |
| const unsigned h0 = u_align(params->h0, hz_align_j); |
| const unsigned h1 = u_align(params->h1, hz_align_j); |
| const unsigned htail = |
| ((intel_gpu_gen(params->gpu) >= INTEL_GEN(7)) ? 12 : 11) * hz_align_j; |
| const unsigned hz_qpitch = h0 + h1 + htail; |
| |
| hz_width = u_align(layout->lods[0].slice_width, 16); |
| |
| hz_height = hz_qpitch * info->arrayLayers / 2; |
| if (intel_gpu_gen(params->gpu) >= INTEL_GEN(7)) |
| hz_height = u_align(hz_height, 8); |
| |
| layout->aux_layer_height = hz_qpitch; |
| } |
| break; |
| case INTEL_LAYOUT_WALK_3D: |
| hz_width = u_align(layout->lods[0].slice_width, 16); |
| |
| hz_height = 0; |
| for (lv = 0; lv < info->mipLevels; lv++) { |
| const unsigned h = u_align(layout->lods[lv].slice_height, hz_align_j); |
| /* according to the formula, slices are packed together vertically */ |
| hz_height += h * u_minify(info->extent.depth, lv); |
| } |
| hz_height /= 2; |
| break; |
| default: |
| assert(!"unknown layout walk"); |
| hz_width = 0; |
| hz_height = 0; |
| break; |
| } |
| |
| /* |
| * In hiz_align_fb(), we will align the LODs to 8x4 sample blocks. |
| * Experiments on Haswell show that aligning the RECTLIST primitive and |
| * 3DSTATE_DRAWING_RECTANGLE alone are not enough. The LOD sizes must be |
| * aligned. |
| */ |
| hz_clear_w = 8; |
| hz_clear_h = 4; |
| switch (info->samples) { |
| case VK_SAMPLE_COUNT_1_BIT: |
| default: |
| break; |
| case VK_SAMPLE_COUNT_2_BIT: |
| hz_clear_w /= 2; |
| break; |
| case VK_SAMPLE_COUNT_4_BIT: |
| hz_clear_w /= 2; |
| hz_clear_h /= 2; |
| break; |
| case VK_SAMPLE_COUNT_8_BIT: |
| hz_clear_w /= 4; |
| hz_clear_h /= 2; |
| break; |
| case VK_SAMPLE_COUNT_16_BIT: |
| hz_clear_w /= 4; |
| hz_clear_h /= 4; |
| break; |
| } |
| |
| for (lv = 0; lv < info->mipLevels; lv++) { |
| if (u_minify(layout->width0, lv) % hz_clear_w || |
| u_minify(layout->height0, lv) % hz_clear_h) |
| break; |
| layout->aux_enables |= 1 << lv; |
| } |
| |
| /* we padded to allow this in layout_align() */ |
| if (info->mipLevels == 1 && info->arrayLayers == 1 && info->extent.depth == 1) |
| layout->aux_enables |= 0x1; |
| |
| /* align to Y-tile */ |
| layout->aux_stride = u_align(hz_width, 128); |
| layout->aux_height = u_align(hz_height, 32); |
| } |
| |
| static void |
| layout_calculate_mcs_size(struct intel_layout *layout, |
| struct intel_layout_params *params) |
| { |
| const VkImageCreateInfo *info = params->info; |
| int mcs_width, mcs_height, mcs_cpp; |
| int downscale_x, downscale_y; |
| |
| assert(layout->aux == INTEL_LAYOUT_AUX_MCS); |
| |
| if (info->samples != VK_SAMPLE_COUNT_1_BIT) { |
| /* |
| * From the Ivy Bridge PRM, volume 2 part 1, page 326, the clear |
| * rectangle is scaled down by 8x2 for 4X MSAA and 2x2 for 8X MSAA. The |
| * need of scale down could be that the clear rectangle is used to clear |
| * the MCS instead of the RT. |
| * |
| * For 8X MSAA, we need 32 bits in MCS for every pixel in the RT. The |
| * 2x2 factor could come from that the hardware writes 128 bits (an |
| * OWord) at a time, and the OWord in MCS maps to a 2x2 pixel block in |
| * the RT. For 4X MSAA, we need 8 bits in MCS for every pixel in the |
| * RT. Similarly, we could reason that an OWord in 4X MCS maps to a 8x2 |
| * pixel block in the RT. |
| */ |
| switch (info->samples) { |
| case VK_SAMPLE_COUNT_2_BIT: |
| case VK_SAMPLE_COUNT_4_BIT: |
| downscale_x = 8; |
| downscale_y = 2; |
| mcs_cpp = 1; |
| break; |
| case VK_SAMPLE_COUNT_8_BIT: |
| downscale_x = 2; |
| downscale_y = 2; |
| mcs_cpp = 4; |
| break; |
| case VK_SAMPLE_COUNT_16_BIT: |
| downscale_x = 2; |
| downscale_y = 1; |
| mcs_cpp = 8; |
| break; |
| default: |
| assert(!"unsupported sample count"); |
| return; |
| break; |
| } |
| |
| /* |
| * It also appears that the 2x2 subspans generated by the scaled-down |
| * clear rectangle cannot be masked. The scale-down clear rectangle |
| * thus must be aligned to 2x2, and we need to pad. |
| */ |
| mcs_width = u_align(layout->width0, downscale_x * 2); |
| mcs_height = u_align(layout->height0, downscale_y * 2); |
| } else { |
| /* |
| * From the Ivy Bridge PRM, volume 2 part 1, page 327: |
| * |
| * " Pixels Lines |
| * TiledY RT CL |
| * bpp |
| * 32 8 4 |
| * 64 4 4 |
| * 128 2 4 |
| * |
| * TiledX RT CL |
| * bpp |
| * 32 16 2 |
| * 64 8 2 |
| * 128 4 2" |
| * |
| * This table and the two following tables define the RT alignments, the |
| * clear rectangle alignments, and the clear rectangle scale factors. |
| * Viewing the RT alignments as the sizes of 128-byte blocks, we can see |
| * that the clear rectangle alignments are 16x32 blocks, and the clear |
| * rectangle scale factors are 8x16 blocks. |
| * |
| * For non-MSAA RT, we need 1 bit in MCS for every 128-byte block in the |
| * RT. Similar to the MSAA cases, we can argue that an OWord maps to |
| * 8x16 blocks. |
| * |
| * One problem with this reasoning is that a Y-tile in MCS has 8x32 |
| * OWords and maps to 64x512 128-byte blocks. This differs from i965, |
| * which says that a Y-tile maps to 128x256 blocks (\see |
| * intel_get_non_msrt_mcs_alignment). It does not really change |
| * anything except for the size of the allocated MCS. Let's see if we |
| * hit out-of-bound access. |
| */ |
| switch (layout->tiling) { |
| case GEN6_TILING_X: |
| downscale_x = 64 / layout->block_size; |
| downscale_y = 2; |
| break; |
| case GEN6_TILING_Y: |
| downscale_x = 32 / layout->block_size; |
| downscale_y = 4; |
| break; |
| default: |
| assert(!"unsupported tiling mode"); |
| return; |
| break; |
| } |
| |
| downscale_x *= 8; |
| downscale_y *= 16; |
| |
| /* |
| * From the Haswell PRM, volume 7, page 652: |
| * |
| * "Clear rectangle must be aligned to two times the number of |
| * pixels in the table shown below due to 16X16 hashing across the |
| * slice." |
| * |
| * The scaled-down clear rectangle must be aligned to 4x4 instead of |
| * 2x2, and we need to pad. |
| */ |
| mcs_width = u_align(layout->width0, downscale_x * 4) / downscale_x; |
| mcs_height = u_align(layout->height0, downscale_y * 4) / downscale_y; |
| mcs_cpp = 16; /* an OWord */ |
| } |
| |
| layout->aux_enables = (1 << info->mipLevels) - 1; |
| /* align to Y-tile */ |
| layout->aux_stride = u_align(mcs_width * mcs_cpp, 128); |
| layout->aux_height = u_align(mcs_height, 32); |
| } |
| |
| /** |
| * Initialize the layout. Callers should zero-initialize \p layout first. |
| */ |
| void intel_layout_init(struct intel_layout *layout, |
| struct intel_dev *dev, |
| const VkImageCreateInfo *info, |
| bool scanout) |
| { |
| struct intel_layout_params params; |
| |
| memset(¶ms, 0, sizeof(params)); |
| params.dev = dev; |
| params.gpu = dev->gpu; |
| params.info = info; |
| params.scanout = scanout; |
| |
| /* note that there are dependencies between these functions */ |
| layout_init_aux(layout, ¶ms); |
| layout_init_size_and_format(layout, ¶ms); |
| layout_init_walk(layout, ¶ms); |
| layout_init_tiling(layout, ¶ms); |
| layout_init_alignments(layout, ¶ms); |
| layout_init_lods(layout, ¶ms); |
| layout_init_layer_height(layout, ¶ms); |
| |
| layout_align(layout, ¶ms); |
| layout_calculate_bo_size(layout, ¶ms); |
| |
| switch (layout->aux) { |
| case INTEL_LAYOUT_AUX_HIZ: |
| layout_calculate_hiz_size(layout, ¶ms); |
| break; |
| case INTEL_LAYOUT_AUX_MCS: |
| layout_calculate_mcs_size(layout, ¶ms); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /** |
| * Return the offset (in bytes) to a slice within the bo. |
| * |
| * The returned offset is aligned to tile size. Since slices are not |
| * guaranteed to start at tile boundaries, the X and Y offsets (in pixels) |
| * from the tile origin to the slice are also returned. X offset is always a |
| * multiple of 4 and Y offset is always a multiple of 2. |
| */ |
| unsigned |
| intel_layout_get_slice_tile_offset(const struct intel_layout *layout, |
| unsigned level, unsigned slice, |
| unsigned *x_offset, unsigned *y_offset) |
| { |
| unsigned tile_w, tile_h, tile_size, row_size; |
| unsigned tile_offset, x, y; |
| |
| /* see the Sandy Bridge PRM, volume 1 part 2, page 24 */ |
| |
| switch (layout->tiling) { |
| case GEN6_TILING_NONE: |
| tile_w = 1; |
| tile_h = 1; |
| break; |
| case GEN6_TILING_X: |
| tile_w = 512; |
| tile_h = 8; |
| break; |
| case GEN6_TILING_Y: |
| tile_w = 128; |
| tile_h = 32; |
| break; |
| case GEN8_TILING_W: |
| tile_w = 64; |
| tile_h = 64; |
| break; |
| default: |
| assert(!"unknown tiling"); |
| tile_w = 1; |
| tile_h = 1; |
| break; |
| } |
| |
| tile_size = tile_w * tile_h; |
| row_size = layout->bo_stride * tile_h; |
| |
| intel_layout_get_slice_pos(layout, level, slice, &x, &y); |
| /* in bytes */ |
| intel_layout_pos_to_mem(layout, x, y, &x, &y); |
| tile_offset = row_size * (y / tile_h) + tile_size * (x / tile_w); |
| |
| /* |
| * Since tex->bo_stride is a multiple of tile_w, slice_offset should be |
| * aligned at this point. |
| */ |
| assert(tile_offset % tile_size == 0); |
| |
| /* |
| * because of the possible values of align_i and align_j in |
| * tex_layout_init_alignments(), x_offset is guaranteed to be a multiple of |
| * 4 and y_offset is guaranteed to be a multiple of 2. |
| */ |
| if (x_offset) { |
| /* in pixels */ |
| x = (x % tile_w) / layout->block_size * layout->block_width; |
| assert(x % 4 == 0); |
| |
| *x_offset = x; |
| } |
| |
| if (y_offset) { |
| /* in pixels */ |
| y = (y % tile_h) * layout->block_height; |
| assert(y % 2 == 0); |
| |
| *y_offset = y; |
| } |
| |
| return tile_offset; |
| } |