Update zlib to 1.2.11
Reapply and regenerate all local patches to upstream zlib 1.2.11
Explicitly specify 9 as the minimum windowBits value (representing a
512-byte window) during compression in net/websockets even when 8
(representing 256) is received. This was previously silently done during
compression. Because of how zlib's deflate is implemented, when
windowBits is 9, it will produce a stream that can be decompressed with
a 250-byte or larger window.
Changes in 1.2.9 (31 Dec 2016)
- Fix contrib/minizip to permit unzipping with desktop API [Zouzou]
- Improve contrib/blast to return unused bytes
- Assure that gzoffset() is correct when appending
- Improve compress() and uncompress() to support large lengths
- Fix bug in test/example.c where error code not saved
- Remedy Coverity warning [Randers-Pehrson]
- Improve speed of gzprintf() in transparent mode
- Fix inflateInit2() bug when windowBits is 16 or 32
- Change DEBUG macro to ZLIB_DEBUG
- Avoid uninitialized access by gzclose_w()
- Allow building zlib outside of the source directory
- Fix bug that accepted invalid zlib header when windowBits is zero
- Fix gzseek() problem on MinGW due to buggy _lseeki64 there
- Loop on write() calls in gzwrite.c in case of non-blocking I/O
- Add --warn (-w) option to ./configure for more compiler warnings
- Reject a window size of 256 bytes if not using the zlib wrapper
- Fix bug when level 0 used with Z_HUFFMAN or Z_RLE
- Add --debug (-d) option to ./configure to define ZLIB_DEBUG
- Fix bugs in creating a very large gzip header
- Add uncompress2() function, which returns the input size used
- Assure that deflateParams() will not switch functions mid-block
- Dramatically speed up deflation for level 0 (storing)
- Add gzfread(), duplicating the interface of fread()
- Add gzfwrite(), duplicating the interface of fwrite()
- Add deflateGetDictionary() function
- Use snprintf() for later versions of Microsoft C
- Fix *Init macros to use z_ prefix when requested
- Replace as400 with os400 for OS/400 support [Monnerat]
- Add crc32_z() and adler32_z() functions with size_t lengths
- Update Visual Studio project files [AraHaan]
Changes in 1.2.10 (2 Jan 2017)
- Avoid warnings on snprintf() return value
- Fix bug in deflate_stored() for zero-length input
- Fix bug in gzwrite.c that produced corrupt gzip files
- Remove files to be installed before copying them in Makefile.in
- Add warnings when compiling with assembler code
Changes in 1.2.11 (15 Jan 2017)
- Fix deflate stored bug when pulling last block from window
- Permit immediate deflateParams changes before any deflate input
BUG=691074, 691075
Review-Url: https://codereview.chromium.org/2690623003
Cr-Original-Commit-Position: refs/heads/master@{#450585}
Cr-Mirrored-From: https://chromium.googlesource.com/chromium/src
Cr-Mirrored-Commit: 6d9a6251dfe87183075dc16cfa134e41dc4cee0d
diff --git a/inffast.c b/inffast.c
index bda59ce..0dbd1db 100644
--- a/inffast.c
+++ b/inffast.c
@@ -1,5 +1,5 @@
/* inffast.c -- fast decoding
- * Copyright (C) 1995-2008, 2010, 2013 Mark Adler
+ * Copyright (C) 1995-2017 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -8,26 +8,9 @@
#include "inflate.h"
#include "inffast.h"
-#ifndef ASMINF
-
-/* Allow machine dependent optimization for post-increment or pre-increment.
- Based on testing to date,
- Pre-increment preferred for:
- - PowerPC G3 (Adler)
- - MIPS R5000 (Randers-Pehrson)
- Post-increment preferred for:
- - none
- No measurable difference:
- - Pentium III (Anderson)
- - M68060 (Nikl)
- */
-#ifdef POSTINC
-# define OFF 0
-# define PUP(a) *(a)++
+#ifdef ASMINF
+# pragma message("Assembler code may have bugs -- use at your own risk")
#else
-# define OFF 1
-# define PUP(a) *++(a)
-#endif
/*
Decode literal, length, and distance codes and write out the resulting
@@ -96,9 +79,9 @@
/* copy state to local variables */
state = (struct inflate_state FAR *)strm->state;
- in = strm->next_in - OFF;
+ in = strm->next_in;
last = in + (strm->avail_in - 5);
- out = strm->next_out - OFF;
+ out = strm->next_out;
beg = out - (start - strm->avail_out);
end = out + (strm->avail_out - 257);
#ifdef INFLATE_STRICT
@@ -119,9 +102,9 @@
input data or output space */
do {
if (bits < 15) {
- hold += (unsigned long)(PUP(in)) << bits;
+ hold += (unsigned long)(*in++) << bits;
bits += 8;
- hold += (unsigned long)(PUP(in)) << bits;
+ hold += (unsigned long)(*in++) << bits;
bits += 8;
}
here = lcode[hold & lmask];
@@ -134,14 +117,14 @@
Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
"inflate: literal '%c'\n" :
"inflate: literal 0x%02x\n", here.val));
- PUP(out) = (unsigned char)(here.val);
+ *out++ = (unsigned char)(here.val);
}
else if (op & 16) { /* length base */
len = (unsigned)(here.val);
op &= 15; /* number of extra bits */
if (op) {
if (bits < op) {
- hold += (unsigned long)(PUP(in)) << bits;
+ hold += (unsigned long)(*in++) << bits;
bits += 8;
}
len += (unsigned)hold & ((1U << op) - 1);
@@ -150,9 +133,9 @@
}
Tracevv((stderr, "inflate: length %u\n", len));
if (bits < 15) {
- hold += (unsigned long)(PUP(in)) << bits;
+ hold += (unsigned long)(*in++) << bits;
bits += 8;
- hold += (unsigned long)(PUP(in)) << bits;
+ hold += (unsigned long)(*in++) << bits;
bits += 8;
}
here = dcode[hold & dmask];
@@ -165,10 +148,10 @@
dist = (unsigned)(here.val);
op &= 15; /* number of extra bits */
if (bits < op) {
- hold += (unsigned long)(PUP(in)) << bits;
+ hold += (unsigned long)(*in++) << bits;
bits += 8;
if (bits < op) {
- hold += (unsigned long)(PUP(in)) << bits;
+ hold += (unsigned long)(*in++) << bits;
bits += 8;
}
}
@@ -196,30 +179,30 @@
#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
if (len <= op - whave) {
do {
- PUP(out) = 0;
+ *out++ = 0;
} while (--len);
continue;
}
len -= op - whave;
do {
- PUP(out) = 0;
+ *out++ = 0;
} while (--op > whave);
if (op == 0) {
from = out - dist;
do {
- PUP(out) = PUP(from);
+ *out++ = *from++;
} while (--len);
continue;
}
#endif
}
- from = window - OFF;
+ from = window;
if (wnext == 0) { /* very common case */
from += wsize - op;
if (op < len) { /* some from window */
len -= op;
do {
- PUP(out) = PUP(from);
+ *out++ = *from++;
} while (--op);
from = out - dist; /* rest from output */
}
@@ -230,14 +213,14 @@
if (op < len) { /* some from end of window */
len -= op;
do {
- PUP(out) = PUP(from);
+ *out++ = *from++;
} while (--op);
- from = window - OFF;
+ from = window;
if (wnext < len) { /* some from start of window */
op = wnext;
len -= op;
do {
- PUP(out) = PUP(from);
+ *out++ = *from++;
} while (--op);
from = out - dist; /* rest from output */
}
@@ -248,35 +231,35 @@
if (op < len) { /* some from window */
len -= op;
do {
- PUP(out) = PUP(from);
+ *out++ = *from++;
} while (--op);
from = out - dist; /* rest from output */
}
}
while (len > 2) {
- PUP(out) = PUP(from);
- PUP(out) = PUP(from);
- PUP(out) = PUP(from);
+ *out++ = *from++;
+ *out++ = *from++;
+ *out++ = *from++;
len -= 3;
}
if (len) {
- PUP(out) = PUP(from);
+ *out++ = *from++;
if (len > 1)
- PUP(out) = PUP(from);
+ *out++ = *from++;
}
}
else {
from = out - dist; /* copy direct from output */
do { /* minimum length is three */
- PUP(out) = PUP(from);
- PUP(out) = PUP(from);
- PUP(out) = PUP(from);
+ *out++ = *from++;
+ *out++ = *from++;
+ *out++ = *from++;
len -= 3;
} while (len > 2);
if (len) {
- PUP(out) = PUP(from);
+ *out++ = *from++;
if (len > 1)
- PUP(out) = PUP(from);
+ *out++ = *from++;
}
}
}
@@ -313,8 +296,8 @@
hold &= (1U << bits) - 1;
/* update state and return */
- strm->next_in = in + OFF;
- strm->next_out = out + OFF;
+ strm->next_in = in;
+ strm->next_out = out;
strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
strm->avail_out = (unsigned)(out < end ?
257 + (end - out) : 257 - (out - end));