| /* |
| * Copyright (C) 2018 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.graphics.text; |
| |
| import android.annotation.FloatRange; |
| import android.annotation.IntDef; |
| import android.annotation.IntRange; |
| import android.annotation.NonNull; |
| import android.annotation.Nullable; |
| import android.annotation.Px; |
| |
| import dalvik.annotation.optimization.CriticalNative; |
| import dalvik.annotation.optimization.FastNative; |
| |
| import libcore.util.NativeAllocationRegistry; |
| |
| import java.lang.annotation.Retention; |
| import java.lang.annotation.RetentionPolicy; |
| |
| /** |
| * Provides automatic line breaking for a <em>single</em> paragraph. |
| * |
| * <p> |
| * <pre> |
| * <code> |
| * Paint paint = new Paint(); |
| * Paint bigPaint = new Paint(); |
| * bigPaint.setTextSize(paint.getTextSize() * 2.0); |
| * String text = "Hello, Android."; |
| * |
| * // Prepare the measured text |
| * MeasuredText mt = new MeasuredText.Builder(text.toCharArray()) |
| * .appendStyleRun(paint, 7, false) // Use paint for "Hello, " |
| * .appednStyleRun(bigPaint, 8, false) // Use bigPaint for "Hello, " |
| * .build(); |
| * |
| * LineBreaker lb = new LineBreaker.Builder() |
| * // Use simple line breaker |
| * .setBreakStrategy(LineBreaker.BREAK_STRATEGY_SIMPLE) |
| * // Do not add hyphenation. |
| * .setHyphenationFrequency(LineBreaker.HYPHENATION_FREQUENCY_NONE) |
| * // Build the LineBreaker |
| * .build(); |
| * |
| * ParagraphConstraints c = new ParagraphConstraints(); |
| * c.setWidth(240); // Set the line wieth as 1024px |
| * |
| * // Do the line breaking |
| * Result r = lb.computeLineBreaks(mt, c, 0); |
| * |
| * // Compute the total height of the text. |
| * float totalHeight = 0; |
| * for (int i = 0; i < r.getLineCount(); ++i) { // iterate over the lines |
| * totalHeight += r.getLineDescent(i) - r.getLineAscent(i); |
| * } |
| * |
| * // Draw text to the canvas |
| * Bitmap bmp = new Bitmap.createBitmap(240, totalHeight, Bitmap.Config.ARGB_8888); |
| * Canvas c = new Canvas(bmp); |
| * float yOffset = 0f; |
| * int prevOffset = 0; |
| * for (int i = 0; i < r.getLineCount(); ++i) { // iterate over the lines |
| * int nextOffset = r.getLineBreakOffset(i); |
| * c.drawText(text, prevOffset, nextOffset, 0f, yOffset, paint); |
| * |
| * prevOffset = nextOffset; |
| * yOffset += r.getLineDescent(i) - r.getLineAscent(i); |
| * } |
| * </code> |
| * </pre> |
| * </p> |
| */ |
| public class LineBreaker { |
| /** @hide */ |
| @IntDef(prefix = { "BREAK_STRATEGY_" }, value = { |
| BREAK_STRATEGY_SIMPLE, |
| BREAK_STRATEGY_HIGH_QUALITY, |
| BREAK_STRATEGY_BALANCED |
| }) |
| @Retention(RetentionPolicy.SOURCE) |
| public @interface BreakStrategy {} |
| |
| /** |
| * Value for break strategy indicating simple line breaking. |
| * |
| * The line breaker puts words to the line as much as possible and breaks line if no more words |
| * can fit into the same line. Automatic hyphens are only added when a line has a single word |
| * and that word is longer than line width. This is the fastest break strategy and ideal for |
| * editor. |
| */ |
| public static final int BREAK_STRATEGY_SIMPLE = 0; |
| |
| /** |
| * Value for break strategy indicating high quality line breaking. |
| * |
| * With this option line breaker does whole-paragraph optimization for more readable text, and |
| * also applies automatic hyphenation when required. |
| */ |
| public static final int BREAK_STRATEGY_HIGH_QUALITY = 1; |
| |
| /** |
| * Value for break strategy indicating balanced line breaking. |
| * |
| * The line breaker does whole-paragraph optimization for making all lines similar length, and |
| * also applies automatic hyphenation when required. This break strategy is good for small |
| * screen devices such as watch screens. |
| */ |
| public static final int BREAK_STRATEGY_BALANCED = 2; |
| |
| /** @hide */ |
| @IntDef(prefix = { "HYPHENATION_FREQUENCY_" }, value = { |
| HYPHENATION_FREQUENCY_NORMAL, |
| HYPHENATION_FREQUENCY_FULL, |
| HYPHENATION_FREQUENCY_NONE |
| }) |
| @Retention(RetentionPolicy.SOURCE) |
| public @interface HyphenationFrequency {} |
| |
| /** |
| * Value for hyphenation frequency indicating no automatic hyphenation. |
| * |
| * Using this option disables auto hyphenation which results in better text layout performance. |
| * A word may be broken without hyphens when a line has a single word and that word is longer |
| * than line width. Soft hyphens are ignored and will not be used as suggestions for potential |
| * line breaks. |
| */ |
| public static final int HYPHENATION_FREQUENCY_NONE = 0; |
| |
| /** |
| * Value for hyphenation frequency indicating a light amount of automatic hyphenation. |
| * |
| * This hyphenation frequency is useful for informal cases, such as short sentences or chat |
| * messages. |
| */ |
| public static final int HYPHENATION_FREQUENCY_NORMAL = 1; |
| |
| /** |
| * Value for hyphenation frequency indicating the full amount of automatic hyphenation. |
| * |
| * This hyphenation frequency is useful for running text and where it's important to put the |
| * maximum amount of text in a screen with limited space. |
| */ |
| public static final int HYPHENATION_FREQUENCY_FULL = 2; |
| |
| /** @hide */ |
| @IntDef(prefix = { "JUSTIFICATION_MODE_" }, value = { |
| JUSTIFICATION_MODE_NONE, |
| JUSTIFICATION_MODE_INTER_WORD |
| }) |
| @Retention(RetentionPolicy.SOURCE) |
| public @interface JustificationMode {} |
| |
| /** |
| * Value for justification mode indicating no justification. |
| */ |
| public static final int JUSTIFICATION_MODE_NONE = 0; |
| |
| /** |
| * Value for justification mode indicating the text is justified by stretching word spacing. |
| */ |
| public static final int JUSTIFICATION_MODE_INTER_WORD = 1; |
| |
| /** |
| * Helper class for creating a {@link LineBreaker}. |
| */ |
| public static class Builder { |
| private @BreakStrategy int mBreakStrategy = BREAK_STRATEGY_SIMPLE; |
| private @HyphenationFrequency int mHyphenationFrequency = HYPHENATION_FREQUENCY_NONE; |
| private @JustificationMode int mJustified = JUSTIFICATION_MODE_NONE; |
| private @Nullable int[] mIndents = null; |
| |
| /** |
| * Set break strategy. |
| * |
| * You can change the line breaking behavior by setting break strategy. The default value is |
| * {@link #BREAK_STRATEGY_SIMPLE}. |
| */ |
| public Builder setBreakStrategy(@BreakStrategy int breakStrategy) { |
| mBreakStrategy = breakStrategy; |
| return this; |
| } |
| |
| /** |
| * Set hyphenation frequency. |
| * |
| * You can change the amount of automatic hyphenation used. The default value is |
| * {@link #HYPHENATION_FREQUENCY_NONE}. |
| */ |
| public Builder setHyphenationFrequency(@HyphenationFrequency int hyphenationFrequency) { |
| mHyphenationFrequency = hyphenationFrequency; |
| return this; |
| } |
| |
| /** |
| * Set whether the text is justified. |
| * |
| * By setting {@link #JUSTIFICATION_MODE_INTER_WORD}, the line breaker will change the |
| * internal parameters for justification. |
| * The default value is {@link #JUSTIFICATION_MODE_NONE} |
| */ |
| public Builder setJustified(@JustificationMode int justified) { |
| mJustified = justified; |
| return this; |
| } |
| |
| /** |
| * Set indents. |
| * |
| * The supplied array provides the total amount of indentation per line, in pixel. This |
| * amount is the sum of both left and right indentations. For lines past the last element in |
| * the array, the indentation amount of the last element is used. |
| */ |
| public Builder setIndents(@Nullable int[] indents) { |
| mIndents = indents; |
| return this; |
| } |
| |
| /** |
| * Build a new LineBreaker with given parameters. |
| * |
| * You can reuse the Builder instance even after calling this method. |
| */ |
| public LineBreaker build() { |
| return new LineBreaker(mBreakStrategy, mHyphenationFrequency, mJustified, mIndents); |
| } |
| } |
| |
| /** |
| * Line breaking constraints for single paragraph. |
| */ |
| public static class ParagraphConstraints { |
| private @FloatRange(from = 0.0f) float mWidth = 0; |
| private @FloatRange(from = 0.0f) float mFirstWidth = 0; |
| private @IntRange(from = 0) int mFirstWidthLineCount = 0; |
| private @Nullable int[] mVariableTabStops = null; |
| private @IntRange(from = 0) int mDefaultTabStop = 0; |
| |
| public ParagraphConstraints() {} |
| |
| /** |
| * Set width for this paragraph. |
| * |
| * @see #getWidth() |
| */ |
| public void setWidth(@Px @FloatRange(from = 0.0f) float width) { |
| mWidth = width; |
| } |
| |
| /** |
| * Set indent for this paragraph. |
| * |
| * @param firstWidth the line width of the starting of the paragraph |
| * @param firstWidthLineCount the number of lines that applies the firstWidth |
| * @see #getFirstWidth() |
| * @see #getFirstWidthLineCount() |
| */ |
| public void setIndent(@Px @FloatRange(from = 0.0f) float firstWidth, |
| @Px @IntRange(from = 0) int firstWidthLineCount) { |
| mFirstWidth = firstWidth; |
| mFirstWidthLineCount = firstWidthLineCount; |
| } |
| |
| /** |
| * Set tab stops for this paragraph. |
| * |
| * @param tabStops the array of pixels of tap stopping position |
| * @param defaultTabStop pixels of the default tab stopping position |
| * @see #getTabStops() |
| * @see #getDefaultTabStop() |
| */ |
| public void setTabStops(@Nullable int[] tabStops, |
| @Px @IntRange(from = 0) int defaultTabStop) { |
| mVariableTabStops = tabStops; |
| mDefaultTabStop = defaultTabStop; |
| } |
| |
| /** |
| * Return the width for this paragraph in pixels. |
| * |
| * @see #setWidth(float) |
| */ |
| public @Px @FloatRange(from = 0.0f) float getWidth() { |
| return mWidth; |
| } |
| |
| /** |
| * Return the first line's width for this paragraph in pixel. |
| * |
| * @see #setIndent(float, int) |
| */ |
| public @Px @FloatRange(from = 0.0f) float getFirstWidth() { |
| return mFirstWidth; |
| } |
| |
| /** |
| * Return the number of lines to apply the first line's width. |
| * |
| * @see #setIndent(float, int) |
| */ |
| public @Px @IntRange(from = 0) int getFirstWidthLineCount() { |
| return mFirstWidthLineCount; |
| } |
| |
| /** |
| * Returns the array of tab stops in pixels. |
| * |
| * @see #setTabStops(int[], int) |
| */ |
| public @Nullable int[] getTabStops() { |
| return mVariableTabStops; |
| } |
| |
| /** |
| * Returns the default tab stops in pixels. |
| * |
| * @see #setTabStop(int[], int) |
| */ |
| public @Px @IntRange(from = 0) int getDefaultTabStop() { |
| return mDefaultTabStop; |
| } |
| } |
| |
| /** |
| * Holds the result of the {@link LineBreaker#computeLineBreaks line breaking algorithm}. |
| * @see LineBreaker#computeLineBreaks |
| */ |
| public static class Result { |
| // Following two contstant must be synced with minikin's line breaker. |
| private static final int TAB_MASK = 0x20000000; |
| private static final int HYPHEN_MASK = 0xFF; |
| |
| private static final NativeAllocationRegistry sRegistry = new NativeAllocationRegistry( |
| Result.class.getClassLoader(), nGetReleaseResultFunc(), 32); |
| private final long mPtr; |
| |
| private Result(long ptr) { |
| mPtr = ptr; |
| sRegistry.registerNativeAllocation(this, mPtr); |
| } |
| |
| /** |
| * Returns the number of lines in the paragraph. |
| * |
| * @return number of lines |
| */ |
| public @IntRange(from = 0) int getLineCount() { |
| return nGetLineCount(mPtr); |
| } |
| |
| /** |
| * Returns character offset of the break for a given line. |
| * |
| * @param lineIndex an index of the line. |
| * @return the break offset. |
| */ |
| public @IntRange(from = 0) int getLineBreakOffset(@IntRange(from = 0) int lineIndex) { |
| return nGetLineBreakOffset(mPtr, lineIndex); |
| } |
| |
| /** |
| * Returns width of a given line in pixels. |
| * |
| * @param lineIndex an index of the line. |
| * @return width of the line in pixels |
| */ |
| public @Px float getLineWidth(@IntRange(from = 0) int lineIndex) { |
| return nGetLineWidth(mPtr, lineIndex); |
| } |
| |
| /** |
| * Returns font ascent of the line in pixels. |
| * |
| * @param lineIndex an index of the line. |
| * @return an entier font ascent of the line in pixels. |
| */ |
| public @Px float getLineAscent(@IntRange(from = 0) int lineIndex) { |
| return nGetLineAscent(mPtr, lineIndex); |
| } |
| |
| /** |
| * Returns font descent of the line in pixels. |
| * |
| * @param lineIndex an index of the line. |
| * @return an entier font descent of the line in pixels. |
| */ |
| public @Px float getLineDescent(@IntRange(from = 0) int lineIndex) { |
| return nGetLineDescent(mPtr, lineIndex); |
| } |
| |
| /** |
| * Returns true if the line has a TAB character. |
| * |
| * @param lineIndex an index of the line. |
| * @return true if the line has a TAB character |
| */ |
| public boolean hasLineTab(int lineIndex) { |
| return (nGetLineFlag(mPtr, lineIndex) & TAB_MASK) != 0; |
| } |
| |
| /** |
| * Returns a packed packed hyphen edit for the line. |
| * |
| * @param lineIndex an index of the line. |
| * @return a packed hyphen edit for the line. |
| * |
| * @see android.text.Hyphenator#unpackStartHyphenEdit(int) |
| * @see android.text.Hyphenator#unpackEndHyphenEdit(int) |
| * @see android.text.Hyphenator#packHyphenEdit(int,int) |
| */ |
| public int getLineHyphenEdit(int lineIndex) { |
| return (nGetLineFlag(mPtr, lineIndex) & HYPHEN_MASK); |
| } |
| } |
| |
| private static final NativeAllocationRegistry sRegistry = new NativeAllocationRegistry( |
| LineBreaker.class.getClassLoader(), nGetReleaseFunc(), 64); |
| |
| private final long mNativePtr; |
| |
| /** |
| * Use Builder instead. |
| */ |
| private LineBreaker(@BreakStrategy int breakStrategy, |
| @HyphenationFrequency int hyphenationFrequency, @JustificationMode int justify, |
| @Nullable int[] indents) { |
| mNativePtr = nInit(breakStrategy, hyphenationFrequency, |
| justify == JUSTIFICATION_MODE_INTER_WORD, indents); |
| sRegistry.registerNativeAllocation(this, mNativePtr); |
| } |
| |
| /** |
| * Break paragraph into lines. |
| * |
| * The result is filled to out param. |
| * |
| * @param measuredPara a result of the text measurement |
| * @param constraints for a single paragraph |
| * @param lineNumber a line number of this paragraph |
| */ |
| public Result computeLineBreaks( |
| @NonNull MeasuredText measuredPara, |
| @NonNull ParagraphConstraints constraints, |
| @IntRange(from = 0) int lineNumber) { |
| return new Result(nComputeLineBreaks( |
| mNativePtr, |
| |
| // Inputs |
| measuredPara.getChars(), |
| measuredPara.getNativePtr(), |
| measuredPara.getChars().length, |
| constraints.mFirstWidth, |
| constraints.mFirstWidthLineCount, |
| constraints.mWidth, |
| constraints.mVariableTabStops, |
| constraints.mDefaultTabStop, |
| lineNumber)); |
| } |
| |
| @FastNative |
| private static native long nInit(@BreakStrategy int breakStrategy, |
| @HyphenationFrequency int hyphenationFrequency, boolean isJustified, |
| @Nullable int[] indents); |
| |
| @CriticalNative |
| private static native long nGetReleaseFunc(); |
| |
| // populates LineBreaks and returns the number of breaks found |
| // |
| // the arrays inside the LineBreaks objects are passed in as well |
| // to reduce the number of JNI calls in the common case where the |
| // arrays do not have to be resized |
| // The individual character widths will be returned in charWidths. The length of |
| // charWidths must be at least the length of the text. |
| private static native long nComputeLineBreaks( |
| /* non zero */ long nativePtr, |
| |
| // Inputs |
| @NonNull char[] text, |
| /* Non Zero */ long measuredTextPtr, |
| @IntRange(from = 0) int length, |
| @FloatRange(from = 0.0f) float firstWidth, |
| @IntRange(from = 0) int firstWidthLineCount, |
| @FloatRange(from = 0.0f) float restWidth, |
| @Nullable int[] variableTabStops, |
| int defaultTabStop, |
| @IntRange(from = 0) int indentsOffset); |
| |
| // Result accessors |
| @CriticalNative |
| private static native int nGetLineCount(long ptr); |
| @CriticalNative |
| private static native int nGetLineBreakOffset(long ptr, int idx); |
| @CriticalNative |
| private static native float nGetLineWidth(long ptr, int idx); |
| @CriticalNative |
| private static native float nGetLineAscent(long ptr, int idx); |
| @CriticalNative |
| private static native float nGetLineDescent(long ptr, int idx); |
| @CriticalNative |
| private static native int nGetLineFlag(long ptr, int idx); |
| @CriticalNative |
| private static native long nGetReleaseResultFunc(); |
| } |