| /* |
| * Copyright (C) 2010 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef ANDROID_HWUI_PROPERTIES_H |
| #define ANDROID_HWUI_PROPERTIES_H |
| |
| #include <cutils/properties.h> |
| #include <stdlib.h> |
| |
| /** |
| * This file contains the list of system properties used to configure |
| * the OpenGLRenderer. |
| */ |
| |
| // If turned on, text is interpreted as glyphs instead of UTF-16 |
| #define RENDER_TEXT_AS_GLYPHS 1 |
| |
| // Indicates whether to remove the biggest layers first, or the smaller ones |
| #define LAYER_REMOVE_BIGGEST_FIRST 0 |
| |
| // Textures used by layers must have dimensions multiples of this number |
| #define LAYER_SIZE 64 |
| |
| // Defines the size in bits of the stencil buffer for the framebuffer |
| // Note: Only 1 bit is required for clipping but more bits are required |
| // to properly implement overdraw debugging |
| #define STENCIL_BUFFER_SIZE 8 |
| |
| /** |
| * Debug level for app developers. The value is a numeric value defined |
| * by the DebugLevel enum below. |
| */ |
| #define PROPERTY_DEBUG "debug.hwui.level" |
| |
| /** |
| * Debug levels. Debug levels are used as flags. |
| */ |
| enum DebugLevel { |
| kDebugDisabled = 0, |
| kDebugMemory = 1, |
| kDebugCaches = 2, |
| kDebugMoreCaches = kDebugMemory | kDebugCaches |
| }; |
| |
| /** |
| * Used to enable/disable layers update debugging. The accepted values are |
| * "true" and "false". The default value is "false". |
| */ |
| #define PROPERTY_DEBUG_LAYERS_UPDATES "debug.hwui.show_layers_updates" |
| |
| /** |
| * Used to enable/disable overdraw debugging. The accepted values are |
| * "true" and "false". The default value is "false". |
| */ |
| #define PROPERTY_DEBUG_OVERDRAW "debug.hwui.show_overdraw" |
| |
| /** |
| * Used to enable/disable non-rectangular clipping debugging. |
| * |
| * The accepted values are: |
| * "highlight", drawing commands clipped by the stencil will |
| * be colored differently |
| * "region", renders the clipping region on screen whenever |
| * the stencil is set |
| * "hide", don't show the clip |
| * |
| * The default value is "hide". |
| */ |
| #define PROPERTY_DEBUG_STENCIL_CLIP "debug.hwui.show_non_rect_clip" |
| |
| /** |
| * Used to enable/disable scissor optimization. The accepted values are |
| * "true" and "false". The default value is "false". |
| * |
| * When scissor optimization is enabled, OpenGLRenderer will attempt to |
| * minimize the use of scissor by selectively enabling and disabling the |
| * GL scissor test. |
| * When the optimization is disabled, OpenGLRenderer will keep the GL |
| * scissor test enabled and change the scissor rect as needed. |
| * Some GPUs (for instance the SGX 540) perform better when changing |
| * the scissor rect often than when enabling/disabling the scissor test |
| * often. |
| */ |
| #define PROPERTY_DISABLE_SCISSOR_OPTIMIZATION "ro.hwui.disable_scissor_opt" |
| |
| /** |
| * Disables draw operation deferral if set to "true", forcing draw |
| * commands to be issued to OpenGL in order, and processed in sequence |
| * with state-manipulation canvas commands. |
| */ |
| #define PROPERTY_DISABLE_DRAW_DEFER "debug.hwui.disable_draw_defer" |
| |
| /** |
| * Used to disable draw operation reordering when deferring draw operations |
| * Has no effect if PROPERTY_DISABLE_DRAW_DEFER is set to "true" |
| */ |
| #define PROPERTY_DISABLE_DRAW_REORDER "debug.hwui.disable_draw_reorder" |
| |
| // These properties are defined in mega-bytes |
| #define PROPERTY_TEXTURE_CACHE_SIZE "ro.hwui.texture_cache_size" |
| #define PROPERTY_LAYER_CACHE_SIZE "ro.hwui.layer_cache_size" |
| #define PROPERTY_RENDER_BUFFER_CACHE_SIZE "ro.hwui.r_buffer_cache_size" |
| #define PROPERTY_GRADIENT_CACHE_SIZE "ro.hwui.gradient_cache_size" |
| #define PROPERTY_PATH_CACHE_SIZE "ro.hwui.path_cache_size" |
| #define PROPERTY_DROP_SHADOW_CACHE_SIZE "ro.hwui.drop_shadow_cache_size" |
| #define PROPERTY_FBO_CACHE_SIZE "ro.hwui.fbo_cache_size" |
| |
| // These properties are defined in percentage (range 0..1) |
| #define PROPERTY_TEXTURE_CACHE_FLUSH_RATE "ro.hwui.texture_cache_flushrate" |
| |
| // These properties are defined in pixels |
| #define PROPERTY_TEXT_SMALL_CACHE_WIDTH "ro.hwui.text_small_cache_width" |
| #define PROPERTY_TEXT_SMALL_CACHE_HEIGHT "ro.hwui.text_small_cache_height" |
| #define PROPERTY_TEXT_LARGE_CACHE_WIDTH "ro.hwui.text_large_cache_width" |
| #define PROPERTY_TEXT_LARGE_CACHE_HEIGHT "ro.hwui.text_large_cache_height" |
| |
| // Indicates whether gamma correction should be applied in the shaders |
| // or in lookup tables. Accepted values: |
| // |
| // - "lookup3", correction based on lookup tables. Gamma correction |
| // is different for black and white text (see thresholds below) |
| // |
| // - "lookup", correction based on a single lookup table |
| // |
| // - "shader3", correction applied by a GLSL shader. Gamma correction |
| // is different for black and white text (see thresholds below) |
| // |
| // - "shader", correction applied by a GLSL shader |
| // |
| // See PROPERTY_TEXT_GAMMA, PROPERTY_TEXT_BLACK_GAMMA_THRESHOLD and |
| // PROPERTY_TEXT_WHITE_GAMMA_THRESHOLD for more control. |
| #define PROPERTY_TEXT_GAMMA_METHOD "hwui.text_gamma_correction" |
| #define DEFAULT_TEXT_GAMMA_METHOD "lookup" |
| |
| // Gamma (>= 1.0, <= 10.0) |
| #define PROPERTY_TEXT_GAMMA "hwui.text_gamma" |
| // Luminance threshold below which black gamma correction is applied. Range: [0..255] |
| #define PROPERTY_TEXT_BLACK_GAMMA_THRESHOLD "hwui.text_gamma.black_threshold" |
| // Lumincance threshold above which white gamma correction is applied. Range: [0..255] |
| #define PROPERTY_TEXT_WHITE_GAMMA_THRESHOLD "hwui.text_gamma.white_threshold" |
| |
| // Converts a number of mega-bytes into bytes |
| #define MB(s) s * 1024 * 1024 |
| |
| #define DEFAULT_TEXTURE_CACHE_SIZE 24.0f |
| #define DEFAULT_LAYER_CACHE_SIZE 16.0f |
| #define DEFAULT_RENDER_BUFFER_CACHE_SIZE 2.0f |
| #define DEFAULT_PATH_CACHE_SIZE 10.0f |
| #define DEFAULT_PATCH_CACHE_SIZE 512 |
| #define DEFAULT_GRADIENT_CACHE_SIZE 0.5f |
| #define DEFAULT_DROP_SHADOW_CACHE_SIZE 2.0f |
| #define DEFAULT_FBO_CACHE_SIZE 16 |
| |
| #define DEFAULT_TEXTURE_CACHE_FLUSH_RATE 0.6f |
| |
| #define DEFAULT_TEXT_GAMMA 1.4f |
| #define DEFAULT_TEXT_BLACK_GAMMA_THRESHOLD 64 |
| #define DEFAULT_TEXT_WHITE_GAMMA_THRESHOLD 192 |
| |
| static DebugLevel readDebugLevel() { |
| char property[PROPERTY_VALUE_MAX]; |
| if (property_get(PROPERTY_DEBUG, property, NULL) > 0) { |
| return (DebugLevel) atoi(property); |
| } |
| return kDebugDisabled; |
| } |
| |
| #endif // ANDROID_HWUI_PROPERTIES_H |