/*
 * Copyright (C) 2010 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package android.animation;

import android.os.Handler;
import android.os.Looper;
import android.os.Message;
import android.util.AndroidRuntimeException;
import android.view.animation.AccelerateDecelerateInterpolator;
import android.view.animation.AnimationUtils;
import android.view.animation.LinearInterpolator;

import java.util.ArrayList;
import java.util.HashMap;

/**
 * This class provides a simple timing engine for running animations
 * which calculate animated values and set them on target objects.
 *
 * <p>There is a single timing pulse that all animations use. It runs in a
 * custom handler to ensure that property changes happen on the UI thread.</p>
 *
 * <p>By default, ValueAnimator uses non-linear time interpolation, via the
 * {@link AccelerateDecelerateInterpolator} class, which accelerates into and decelerates
 * out of an animation. This behavior can be changed by calling
 * {@link ValueAnimator#setInterpolator(TimeInterpolator)}.</p>
 */
public class ValueAnimator extends Animator {

    /**
     * Internal constants
     */

    /*
     * The default amount of time in ms between animation frames
     */
    private static final long DEFAULT_FRAME_DELAY = 10;

    /**
     * Messages sent to timing handler: START is sent when an animation first begins, FRAME is sent
     * by the handler to itself to process the next animation frame
     */
    private static final int ANIMATION_START = 0;
    private static final int ANIMATION_FRAME = 1;

    /**
     * Values used with internal variable mPlayingState to indicate the current state of an
     * animation.
     */
    static final int STOPPED    = 0; // Not yet playing
    static final int RUNNING    = 1; // Playing normally
    static final int SEEKED     = 2; // Seeked to some time value

    /**
     * Internal variables
     * NOTE: This object implements the clone() method, making a deep copy of any referenced
     * objects. As other non-trivial fields are added to this class, make sure to add logic
     * to clone() to make deep copies of them.
     */

    // The first time that the animation's animateFrame() method is called. This time is used to
    // determine elapsed time (and therefore the elapsed fraction) in subsequent calls
    // to animateFrame()
    long mStartTime;

    /**
     * Set when setCurrentPlayTime() is called. If negative, animation is not currently seeked
     * to a value.
     */
    long mSeekTime = -1;

    // TODO: We access the following ThreadLocal variables often, some of them on every update.
    // If ThreadLocal access is significantly expensive, we may want to put all of these
    // fields into a structure sot hat we just access ThreadLocal once to get the reference
    // to that structure, then access the structure directly for each field.

    // The static sAnimationHandler processes the internal timing loop on which all animations
    // are based
    private static ThreadLocal<AnimationHandler> sAnimationHandler =
            new ThreadLocal<AnimationHandler>();

    // The per-thread list of all active animations
    private static final ThreadLocal<ArrayList<ValueAnimator>> sAnimations =
            new ThreadLocal<ArrayList<ValueAnimator>>() {
                @Override
                protected ArrayList<ValueAnimator> initialValue() {
                    return new ArrayList<ValueAnimator>();
                }
            };

    // The per-thread set of animations to be started on the next animation frame
    private static final ThreadLocal<ArrayList<ValueAnimator>> sPendingAnimations =
            new ThreadLocal<ArrayList<ValueAnimator>>() {
                @Override
                protected ArrayList<ValueAnimator> initialValue() {
                    return new ArrayList<ValueAnimator>();
                }
            };

    /**
     * Internal per-thread collections used to avoid set collisions as animations start and end
     * while being processed.
     */
    private static final ThreadLocal<ArrayList<ValueAnimator>> sDelayedAnims =
            new ThreadLocal<ArrayList<ValueAnimator>>() {
                @Override
                protected ArrayList<ValueAnimator> initialValue() {
                    return new ArrayList<ValueAnimator>();
                }
            };

    private static final ThreadLocal<ArrayList<ValueAnimator>> sEndingAnims =
            new ThreadLocal<ArrayList<ValueAnimator>>() {
                @Override
                protected ArrayList<ValueAnimator> initialValue() {
                    return new ArrayList<ValueAnimator>();
                }
            };

    private static final ThreadLocal<ArrayList<ValueAnimator>> sReadyAnims =
            new ThreadLocal<ArrayList<ValueAnimator>>() {
                @Override
                protected ArrayList<ValueAnimator> initialValue() {
                    return new ArrayList<ValueAnimator>();
                }
            };

    // The time interpolator to be used if none is set on the animation
    private static final TimeInterpolator sDefaultInterpolator =
            new AccelerateDecelerateInterpolator();

    // type evaluators for the primitive types handled by this implementation
    private static final TypeEvaluator sIntEvaluator = new IntEvaluator();
    private static final TypeEvaluator sFloatEvaluator = new FloatEvaluator();

    /**
     * Used to indicate whether the animation is currently playing in reverse. This causes the
     * elapsed fraction to be inverted to calculate the appropriate values.
     */
    private boolean mPlayingBackwards = false;

    /**
     * This variable tracks the current iteration that is playing. When mCurrentIteration exceeds the
     * repeatCount (if repeatCount!=INFINITE), the animation ends
     */
    private int mCurrentIteration = 0;

    /**
     * Tracks current elapsed/eased fraction, for querying in getAnimatedFraction().
     */
    private float mCurrentFraction = 0f;

    /**
     * Tracks whether a startDelay'd animation has begun playing through the startDelay.
     */
    private boolean mStartedDelay = false;

    /**
     * Tracks the time at which the animation began playing through its startDelay. This is
     * different from the mStartTime variable, which is used to track when the animation became
     * active (which is when the startDelay expired and the animation was added to the active
     * animations list).
     */
    private long mDelayStartTime;

    /**
     * Flag that represents the current state of the animation. Used to figure out when to start
     * an animation (if state == STOPPED). Also used to end an animation that
     * has been cancel()'d or end()'d since the last animation frame. Possible values are
     * STOPPED, RUNNING, SEEKED.
     */
    int mPlayingState = STOPPED;

    /**
     * Flag that denotes whether the animation is set up and ready to go. Used to
     * set up animation that has not yet been started.
     */
    boolean mInitialized = false;

    //
    // Backing variables
    //

    // How long the animation should last in ms
    private long mDuration = 300;

    // The amount of time in ms to delay starting the animation after start() is called
    private long mStartDelay = 0;

    // The number of milliseconds between animation frames
    private static long sFrameDelay = DEFAULT_FRAME_DELAY;

    // The number of times the animation will repeat. The default is 0, which means the animation
    // will play only once
    private int mRepeatCount = 0;

    /**
     * The type of repetition that will occur when repeatMode is nonzero. RESTART means the
     * animation will start from the beginning on every new cycle. REVERSE means the animation
     * will reverse directions on each iteration.
     */
    private int mRepeatMode = RESTART;

    /**
     * The time interpolator to be used. The elapsed fraction of the animation will be passed
     * through this interpolator to calculate the interpolated fraction, which is then used to
     * calculate the animated values.
     */
    private TimeInterpolator mInterpolator = sDefaultInterpolator;

    /**
     * The set of listeners to be sent events through the life of an animation.
     */
    private ArrayList<AnimatorUpdateListener> mUpdateListeners = null;

    /**
     * The property/value sets being animated.
     */
    PropertyValuesHolder[] mValues;

    /**
     * A hashmap of the PropertyValuesHolder objects. This map is used to lookup animated values
     * by property name during calls to getAnimatedValue(String).
     */
    HashMap<String, PropertyValuesHolder> mValuesMap;

    /**
     * Public constants
     */

    /**
     * When the animation reaches the end and <code>repeatCount</code> is INFINITE
     * or a positive value, the animation restarts from the beginning.
     */
    public static final int RESTART = 1;
    /**
     * When the animation reaches the end and <code>repeatCount</code> is INFINITE
     * or a positive value, the animation reverses direction on every iteration.
     */
    public static final int REVERSE = 2;
    /**
     * This value used used with the {@link #setRepeatCount(int)} property to repeat
     * the animation indefinitely.
     */
    public static final int INFINITE = -1;

    /**
     * Creates a new ValueAnimator object. This default constructor is primarily for
     * use internally; the factory methods which take parameters are more generally
     * useful.
     */
    public ValueAnimator() {
    }

    /**
     * Constructs and returns a ValueAnimator that animates between int values. A single
     * value implies that that value is the one being animated to. However, this is not typically
     * useful in a ValueAnimator object because there is no way for the object to determine the
     * starting value for the animation (unlike ObjectAnimator, which can derive that value
     * from the target object and property being animated). Therefore, there should typically
     * be two or more values.
     *
     * @param values A set of values that the animation will animate between over time.
     * @return A ValueAnimator object that is set up to animate between the given values.
     */
    public static ValueAnimator ofInt(int... values) {
        ValueAnimator anim = new ValueAnimator();
        anim.setIntValues(values);
        return anim;
    }

    /**
     * Constructs and returns a ValueAnimator that animates between float values. A single
     * value implies that that value is the one being animated to. However, this is not typically
     * useful in a ValueAnimator object because there is no way for the object to determine the
     * starting value for the animation (unlike ObjectAnimator, which can derive that value
     * from the target object and property being animated). Therefore, there should typically
     * be two or more values.
     *
     * @param values A set of values that the animation will animate between over time.
     * @return A ValueAnimator object that is set up to animate between the given values.
     */
    public static ValueAnimator ofFloat(float... values) {
        ValueAnimator anim = new ValueAnimator();
        anim.setFloatValues(values);
        return anim;
    }

    /**
     * Constructs and returns a ValueAnimator that animates between the values
     * specified in the PropertyValuesHolder objects.
     *
     * @param values A set of PropertyValuesHolder objects whose values will be animated
     * between over time.
     * @return A ValueAnimator object that is set up to animate between the given values.
     */
    public static ValueAnimator ofPropertyValuesHolder(PropertyValuesHolder... values) {
        ValueAnimator anim = new ValueAnimator();
        anim.setValues(values);
        return anim;
    }
    /**
     * Constructs and returns a ValueAnimator that animates between Object values. A single
     * value implies that that value is the one being animated to. However, this is not typically
     * useful in a ValueAnimator object because there is no way for the object to determine the
     * starting value for the animation (unlike ObjectAnimator, which can derive that value
     * from the target object and property being animated). Therefore, there should typically
     * be two or more values.
     *
     * <p>Since ValueAnimator does not know how to animate between arbitrary Objects, this
     * factory method also takes a TypeEvaluator object that the ValueAnimator will use
     * to perform that interpolation.
     *
     * @param evaluator A TypeEvaluator that will be called on each animation frame to
     * provide the ncessry interpolation between the Object values to derive the animated
     * value.
     * @param values A set of values that the animation will animate between over time.
     * @return A ValueAnimator object that is set up to animate between the given values.
     */
    public static ValueAnimator ofObject(TypeEvaluator evaluator, Object... values) {
        ValueAnimator anim = new ValueAnimator();
        anim.setObjectValues(values);
        anim.setEvaluator(evaluator);
        return anim;
    }

    /**
     * Sets int values that will be animated between. A single
     * value implies that that value is the one being animated to. However, this is not typically
     * useful in a ValueAnimator object because there is no way for the object to determine the
     * starting value for the animation (unlike ObjectAnimator, which can derive that value
     * from the target object and property being animated). Therefore, there should typically
     * be two or more values.
     *
     * <p>If there are already multiple sets of values defined for this ValueAnimator via more
     * than one PropertyValuesHolder object, this method will set the values for the first
     * of those objects.</p>
     *
     * @param values A set of values that the animation will animate between over time.
     */
    public void setIntValues(int... values) {
        if (values == null || values.length == 0) {
            return;
        }
        if (mValues == null || mValues.length == 0) {
            setValues(new PropertyValuesHolder[]{PropertyValuesHolder.ofInt("", values)});
        } else {
            PropertyValuesHolder valuesHolder = mValues[0];
            valuesHolder.setIntValues(values);
        }
        // New property/values/target should cause re-initialization prior to starting
        mInitialized = false;
    }

    /**
     * Sets float values that will be animated between. A single
     * value implies that that value is the one being animated to. However, this is not typically
     * useful in a ValueAnimator object because there is no way for the object to determine the
     * starting value for the animation (unlike ObjectAnimator, which can derive that value
     * from the target object and property being animated). Therefore, there should typically
     * be two or more values.
     *
     * <p>If there are already multiple sets of values defined for this ValueAnimator via more
     * than one PropertyValuesHolder object, this method will set the values for the first
     * of those objects.</p>
     *
     * @param values A set of values that the animation will animate between over time.
     */
    public void setFloatValues(float... values) {
        if (values == null || values.length == 0) {
            return;
        }
        if (mValues == null || mValues.length == 0) {
            setValues(new PropertyValuesHolder[]{PropertyValuesHolder.ofFloat("", values)});
        } else {
            PropertyValuesHolder valuesHolder = mValues[0];
            valuesHolder.setFloatValues(values);
        }
        // New property/values/target should cause re-initialization prior to starting
        mInitialized = false;
    }

    /**
     * Sets the values to animate between for this animation. A single
     * value implies that that value is the one being animated to. However, this is not typically
     * useful in a ValueAnimator object because there is no way for the object to determine the
     * starting value for the animation (unlike ObjectAnimator, which can derive that value
     * from the target object and property being animated). Therefore, there should typically
     * be two or more values.
     *
     * <p>If there are already multiple sets of values defined for this ValueAnimator via more
     * than one PropertyValuesHolder object, this method will set the values for the first
     * of those objects.</p>
     *
     * <p>There should be a TypeEvaluator set on the ValueAnimator that knows how to interpolate
     * between these value objects. ValueAnimator only knows how to interpolate between the
     * primitive types specified in the other setValues() methods.</p>
     *
     * @param values The set of values to animate between.
     */
    public void setObjectValues(Object... values) {
        if (values == null || values.length == 0) {
            return;
        }
        if (mValues == null || mValues.length == 0) {
            setValues(new PropertyValuesHolder[]{PropertyValuesHolder.ofObject("",
                    (TypeEvaluator)null, values)});
        } else {
            PropertyValuesHolder valuesHolder = mValues[0];
            valuesHolder.setObjectValues(values);
        }
        // New property/values/target should cause re-initialization prior to starting
        mInitialized = false;
    }

    /**
     * Sets the values, per property, being animated between. This function is called internally
     * by the constructors of ValueAnimator that take a list of values. But an ValueAnimator can
     * be constructed without values and this method can be called to set the values manually
     * instead.
     *
     * @param values The set of values, per property, being animated between.
     */
    public void setValues(PropertyValuesHolder... values) {
        int numValues = values.length;
        mValues = values;
        mValuesMap = new HashMap<String, PropertyValuesHolder>(numValues);
        for (int i = 0; i < numValues; ++i) {
            PropertyValuesHolder valuesHolder = (PropertyValuesHolder) values[i];
            mValuesMap.put(valuesHolder.getPropertyName(), valuesHolder);
        }
        // New property/values/target should cause re-initialization prior to starting
        mInitialized = false;
    }

    /**
     * Returns the values that this ValueAnimator animates between. These values are stored in
     * PropertyValuesHolder objects, even if the ValueAnimator was created with a simple list
     * of value objects instead.
     *
     * @return PropertyValuesHolder[] An array of PropertyValuesHolder objects which hold the
     * values, per property, that define the animation.
     */
    public PropertyValuesHolder[] getValues() {
        return mValues;
    }

    /**
     * This function is called immediately before processing the first animation
     * frame of an animation. If there is a nonzero <code>startDelay</code>, the
     * function is called after that delay ends.
     * It takes care of the final initialization steps for the
     * animation.
     *
     *  <p>Overrides of this method should call the superclass method to ensure
     *  that internal mechanisms for the animation are set up correctly.</p>
     */
    void initAnimation() {
        if (!mInitialized) {
            int numValues = mValues.length;
            for (int i = 0; i < numValues; ++i) {
                mValues[i].init();
            }
            mInitialized = true;
        }
    }


    /**
     * Sets the length of the animation. The default duration is 300 milliseconds.
     *
     * @param duration The length of the animation, in milliseconds. This value cannot
     * be negative.
     * @return ValueAnimator The object called with setDuration(). This return
     * value makes it easier to compose statements together that construct and then set the
     * duration, as in <code>ValueAnimator.ofInt(0, 10).setDuration(500).start()</code>.
     */
    public ValueAnimator setDuration(long duration) {
        if (duration < 0) {
            throw new IllegalArgumentException("Animators cannot have negative duration: " +
                    duration);
        }
        mDuration = duration;
        return this;
    }

    /**
     * Gets the length of the animation. The default duration is 300 milliseconds.
     *
     * @return The length of the animation, in milliseconds.
     */
    public long getDuration() {
        return mDuration;
    }

    /**
     * Sets the position of the animation to the specified point in time. This time should
     * be between 0 and the total duration of the animation, including any repetition. If
     * the animation has not yet been started, then it will not advance forward after it is
     * set to this time; it will simply set the time to this value and perform any appropriate
     * actions based on that time. If the animation is already running, then setCurrentPlayTime()
     * will set the current playing time to this value and continue playing from that point.
     *
     * @param playTime The time, in milliseconds, to which the animation is advanced or rewound.
     */
    public void setCurrentPlayTime(long playTime) {
        initAnimation();
        long currentTime = AnimationUtils.currentAnimationTimeMillis();
        if (mPlayingState != RUNNING) {
            mSeekTime = playTime;
            mPlayingState = SEEKED;
        }
        mStartTime = currentTime - playTime;
        animationFrame(currentTime);
    }

    /**
     * Gets the current position of the animation in time, which is equal to the current
     * time minus the time that the animation started. An animation that is not yet started will
     * return a value of zero.
     *
     * @return The current position in time of the animation.
     */
    public long getCurrentPlayTime() {
        if (!mInitialized || mPlayingState == STOPPED) {
            return 0;
        }
        return AnimationUtils.currentAnimationTimeMillis() - mStartTime;
    }

    /**
     * This custom, static handler handles the timing pulse that is shared by
     * all active animations. This approach ensures that the setting of animation
     * values will happen on the UI thread and that all animations will share
     * the same times for calculating their values, which makes synchronizing
     * animations possible.
     *
     */
    private static class AnimationHandler extends Handler {
        /**
         * There are only two messages that we care about: ANIMATION_START and
         * ANIMATION_FRAME. The START message is sent when an animation's start()
         * method is called. It cannot start synchronously when start() is called
         * because the call may be on the wrong thread, and it would also not be
         * synchronized with other animations because it would not start on a common
         * timing pulse. So each animation sends a START message to the handler, which
         * causes the handler to place the animation on the active animations queue and
         * start processing frames for that animation.
         * The FRAME message is the one that is sent over and over while there are any
         * active animations to process.
         */
        @Override
        public void handleMessage(Message msg) {
            boolean callAgain = true;
            ArrayList<ValueAnimator> animations = sAnimations.get();
            ArrayList<ValueAnimator> delayedAnims = sDelayedAnims.get();
            switch (msg.what) {
                // TODO: should we avoid sending frame message when starting if we
                // were already running?
                case ANIMATION_START:
                    ArrayList<ValueAnimator> pendingAnimations = sPendingAnimations.get();
                    if (animations.size() > 0 || delayedAnims.size() > 0) {
                        callAgain = false;
                    }
                    // pendingAnims holds any animations that have requested to be started
                    // We're going to clear sPendingAnimations, but starting animation may
                    // cause more to be added to the pending list (for example, if one animation
                    // starting triggers another starting). So we loop until sPendingAnimations
                    // is empty.
                    while (pendingAnimations.size() > 0) {
                        ArrayList<ValueAnimator> pendingCopy =
                                (ArrayList<ValueAnimator>) pendingAnimations.clone();
                        pendingAnimations.clear();
                        int count = pendingCopy.size();
                        for (int i = 0; i < count; ++i) {
                            ValueAnimator anim = pendingCopy.get(i);
                            // If the animation has a startDelay, place it on the delayed list
                            if (anim.mStartDelay == 0) {
                                anim.startAnimation();
                            } else {
                                delayedAnims.add(anim);
                            }
                        }
                    }
                    // fall through to process first frame of new animations
                case ANIMATION_FRAME:
                    // currentTime holds the common time for all animations processed
                    // during this frame
                    long currentTime = AnimationUtils.currentAnimationTimeMillis();
                    ArrayList<ValueAnimator> readyAnims = sReadyAnims.get();
                    ArrayList<ValueAnimator> endingAnims = sEndingAnims.get();

                    // First, process animations currently sitting on the delayed queue, adding
                    // them to the active animations if they are ready
                    int numDelayedAnims = delayedAnims.size();
                    for (int i = 0; i < numDelayedAnims; ++i) {
                        ValueAnimator anim = delayedAnims.get(i);
                        if (anim.delayedAnimationFrame(currentTime)) {
                            readyAnims.add(anim);
                        }
                    }
                    int numReadyAnims = readyAnims.size();
                    if (numReadyAnims > 0) {
                        for (int i = 0; i < numReadyAnims; ++i) {
                            ValueAnimator anim = readyAnims.get(i);
                            anim.startAnimation();
                            delayedAnims.remove(anim);
                        }
                        readyAnims.clear();
                    }

                    // Now process all active animations. The return value from animationFrame()
                    // tells the handler whether it should now be ended
                    int numAnims = animations.size();
                    int i = 0;
                    while (i < numAnims) {
                        ValueAnimator anim = animations.get(i);
                        if (anim.animationFrame(currentTime)) {
                            endingAnims.add(anim);
                        }
                        if (animations.size() == numAnims) {
                            ++i;
                        } else {
                            // An animation might be canceled or ended by client code
                            // during the animation frame. Check to see if this happened by
                            // seeing whether the current index is the same as it was before
                            // calling animationFrame(). Another approach would be to copy
                            // animations to a temporary list and process that list instead,
                            // but that entails garbage and processing overhead that would
                            // be nice to avoid.
                            --numAnims;
                            endingAnims.remove(anim);
                        }
                    }
                    if (endingAnims.size() > 0) {
                        for (i = 0; i < endingAnims.size(); ++i) {
                            endingAnims.get(i).endAnimation();
                        }
                        endingAnims.clear();
                    }

                    // If there are still active or delayed animations, call the handler again
                    // after the frameDelay
                    if (callAgain && (!animations.isEmpty() || !delayedAnims.isEmpty())) {
                        sendEmptyMessageDelayed(ANIMATION_FRAME, Math.max(0, sFrameDelay -
                            (AnimationUtils.currentAnimationTimeMillis() - currentTime)));
                    }
                    break;
            }
        }
    }

    /**
     * The amount of time, in milliseconds, to delay starting the animation after
     * {@link #start()} is called.
     *
     * @return the number of milliseconds to delay running the animation
     */
    public long getStartDelay() {
        return mStartDelay;
    }

    /**
     * The amount of time, in milliseconds, to delay starting the animation after
     * {@link #start()} is called.

     * @param startDelay The amount of the delay, in milliseconds
     */
    public void setStartDelay(long startDelay) {
        this.mStartDelay = startDelay;
    }

    /**
     * The amount of time, in milliseconds, between each frame of the animation. This is a
     * requested time that the animation will attempt to honor, but the actual delay between
     * frames may be different, depending on system load and capabilities. This is a static
     * function because the same delay will be applied to all animations, since they are all
     * run off of a single timing loop.
     *
     * @return the requested time between frames, in milliseconds
     */
    public static long getFrameDelay() {
        return sFrameDelay;
    }

    /**
     * The amount of time, in milliseconds, between each frame of the animation. This is a
     * requested time that the animation will attempt to honor, but the actual delay between
     * frames may be different, depending on system load and capabilities. This is a static
     * function because the same delay will be applied to all animations, since they are all
     * run off of a single timing loop.
     *
     * @param frameDelay the requested time between frames, in milliseconds
     */
    public static void setFrameDelay(long frameDelay) {
        sFrameDelay = frameDelay;
    }

    /**
     * The most recent value calculated by this <code>ValueAnimator</code> when there is just one
     * property being animated. This value is only sensible while the animation is running. The main
     * purpose for this read-only property is to retrieve the value from the <code>ValueAnimator</code>
     * during a call to {@link AnimatorUpdateListener#onAnimationUpdate(ValueAnimator)}, which
     * is called during each animation frame, immediately after the value is calculated.
     *
     * @return animatedValue The value most recently calculated by this <code>ValueAnimator</code> for
     * the single property being animated. If there are several properties being animated
     * (specified by several PropertyValuesHolder objects in the constructor), this function
     * returns the animated value for the first of those objects.
     */
    public Object getAnimatedValue() {
        if (mValues != null && mValues.length > 0) {
            return mValues[0].getAnimatedValue();
        }
        // Shouldn't get here; should always have values unless ValueAnimator was set up wrong
        return null;
    }

    /**
     * The most recent value calculated by this <code>ValueAnimator</code> for <code>propertyName</code>.
     * The main purpose for this read-only property is to retrieve the value from the
     * <code>ValueAnimator</code> during a call to
     * {@link AnimatorUpdateListener#onAnimationUpdate(ValueAnimator)}, which
     * is called during each animation frame, immediately after the value is calculated.
     *
     * @return animatedValue The value most recently calculated for the named property
     * by this <code>ValueAnimator</code>.
     */
    public Object getAnimatedValue(String propertyName) {
        PropertyValuesHolder valuesHolder = mValuesMap.get(propertyName);
        if (valuesHolder != null) {
            return valuesHolder.getAnimatedValue();
        } else {
            // At least avoid crashing if called with bogus propertyName
            return null;
        }
    }

    /**
     * Sets how many times the animation should be repeated. If the repeat
     * count is 0, the animation is never repeated. If the repeat count is
     * greater than 0 or {@link #INFINITE}, the repeat mode will be taken
     * into account. The repeat count is 0 by default.
     *
     * @param value the number of times the animation should be repeated
     */
    public void setRepeatCount(int value) {
        mRepeatCount = value;
    }
    /**
     * Defines how many times the animation should repeat. The default value
     * is 0.
     *
     * @return the number of times the animation should repeat, or {@link #INFINITE}
     */
    public int getRepeatCount() {
        return mRepeatCount;
    }

    /**
     * Defines what this animation should do when it reaches the end. This
     * setting is applied only when the repeat count is either greater than
     * 0 or {@link #INFINITE}. Defaults to {@link #RESTART}.
     *
     * @param value {@link #RESTART} or {@link #REVERSE}
     */
    public void setRepeatMode(int value) {
        mRepeatMode = value;
    }

    /**
     * Defines what this animation should do when it reaches the end.
     *
     * @return either one of {@link #REVERSE} or {@link #RESTART}
     */
    public int getRepeatMode() {
        return mRepeatMode;
    }

    /**
     * Adds a listener to the set of listeners that are sent update events through the life of
     * an animation. This method is called on all listeners for every frame of the animation,
     * after the values for the animation have been calculated.
     *
     * @param listener the listener to be added to the current set of listeners for this animation.
     */
    public void addUpdateListener(AnimatorUpdateListener listener) {
        if (mUpdateListeners == null) {
            mUpdateListeners = new ArrayList<AnimatorUpdateListener>();
        }
        mUpdateListeners.add(listener);
    }

    /**
     * Removes all listeners from the set listening to frame updates for this animation.
     */
    public void removeAllUpdateListeners() {
        if (mUpdateListeners == null) {
            return;
        }
        mUpdateListeners.clear();
        mUpdateListeners = null;
    }

    /**
     * Removes a listener from the set listening to frame updates for this animation.
     *
     * @param listener the listener to be removed from the current set of update listeners
     * for this animation.
     */
    public void removeUpdateListener(AnimatorUpdateListener listener) {
        if (mUpdateListeners == null) {
            return;
        }
        mUpdateListeners.remove(listener);
        if (mUpdateListeners.size() == 0) {
            mUpdateListeners = null;
        }
    }


    /**
     * The time interpolator used in calculating the elapsed fraction of this animation. The
     * interpolator determines whether the animation runs with linear or non-linear motion,
     * such as acceleration and deceleration. The default value is
     * {@link android.view.animation.AccelerateDecelerateInterpolator}
     *
     * @param value the interpolator to be used by this animation. A value of <code>null</code>
     * will result in linear interpolation.
     */
    @Override
    public void setInterpolator(TimeInterpolator value) {
        if (value != null) {
            mInterpolator = value;
        } else {
            mInterpolator = new LinearInterpolator();
        }
    }

    /**
     * Returns the timing interpolator that this ValueAnimator uses.
     *
     * @return The timing interpolator for this ValueAnimator.
     */
    public TimeInterpolator getInterpolator() {
        return mInterpolator;
    }

    /**
     * The type evaluator to be used when calculating the animated values of this animation.
     * The system will automatically assign a float or int evaluator based on the type
     * of <code>startValue</code> and <code>endValue</code> in the constructor. But if these values
     * are not one of these primitive types, or if different evaluation is desired (such as is
     * necessary with int values that represent colors), a custom evaluator needs to be assigned.
     * For example, when running an animation on color values, the {@link ArgbEvaluator}
     * should be used to get correct RGB color interpolation.
     *
     * <p>If this ValueAnimator has only one set of values being animated between, this evaluator
     * will be used for that set. If there are several sets of values being animated, which is
     * the case if PropertyValuesHOlder objects were set on the ValueAnimator, then the evaluator
     * is assigned just to the first PropertyValuesHolder object.</p>
     *
     * @param value the evaluator to be used this animation
     */
    public void setEvaluator(TypeEvaluator value) {
        if (value != null && mValues != null && mValues.length > 0) {
            mValues[0].setEvaluator(value);
        }
    }

    /**
     * Start the animation playing. This version of start() takes a boolean flag that indicates
     * whether the animation should play in reverse. The flag is usually false, but may be set
     * to true if called from the reverse() method.
     *
     * <p>The animation started by calling this method will be run on the thread that called
     * this method. This thread should have a Looper on it (a runtime exception will be thrown if
     * this is not the case). Also, if the animation will animate
     * properties of objects in the view hierarchy, then the calling thread should be the UI
     * thread for that view hierarchy.</p>
     *
     * @param playBackwards Whether the ValueAnimator should start playing in reverse.
     */
    private void start(boolean playBackwards) {
        if (Looper.myLooper() == null) {
            throw new AndroidRuntimeException("Animators may only be run on Looper threads");
        }
        mPlayingBackwards = playBackwards;
        mCurrentIteration = 0;
        mPlayingState = STOPPED;
        mStartedDelay = false;
        sPendingAnimations.get().add(this);
        if (mStartDelay == 0) {
            // This sets the initial value of the animation, prior to actually starting it running
            setCurrentPlayTime(getCurrentPlayTime());
            mPlayingState = STOPPED;

            if (mListeners != null) {
                ArrayList<AnimatorListener> tmpListeners =
                        (ArrayList<AnimatorListener>) mListeners.clone();
                int numListeners = tmpListeners.size();
                for (int i = 0; i < numListeners; ++i) {
                    tmpListeners.get(i).onAnimationStart(this);
                }
            }
        }
        AnimationHandler animationHandler = sAnimationHandler.get();
        if (animationHandler == null) {
            animationHandler = new AnimationHandler();
            sAnimationHandler.set(animationHandler);
        }
        animationHandler.sendEmptyMessage(ANIMATION_START);
    }

    @Override
    public void start() {
        start(false);
    }

    @Override
    public void cancel() {
        if (mListeners != null) {
            ArrayList<AnimatorListener> tmpListeners =
                    (ArrayList<AnimatorListener>) mListeners.clone();
            for (AnimatorListener listener : tmpListeners) {
                listener.onAnimationCancel(this);
            }
        }
        // Only cancel if the animation is actually running or has been started and is about
        // to run
        if (mPlayingState != STOPPED || sPendingAnimations.get().contains(this) ||
                sDelayedAnims.get().contains(this)) {
            endAnimation();
        }
    }

    @Override
    public void end() {
        if (!sAnimations.get().contains(this) && !sPendingAnimations.get().contains(this)) {
            // Special case if the animation has not yet started; get it ready for ending
            mStartedDelay = false;
            startAnimation();
        } else if (!mInitialized) {
            initAnimation();
        }
        // The final value set on the target varies, depending on whether the animation
        // was supposed to repeat an odd number of times
        if (mRepeatCount > 0 && (mRepeatCount & 0x01) == 1) {
            animateValue(0f);
        } else {
            animateValue(1f);
        }
        endAnimation();
    }

    @Override
    public boolean isRunning() {
        return (mPlayingState == RUNNING);
    }

    /**
     * Plays the ValueAnimator in reverse. If the animation is already running,
     * it will stop itself and play backwards from the point reached when reverse was called.
     * If the animation is not currently running, then it will start from the end and
     * play backwards. This behavior is only set for the current animation; future playing
     * of the animation will use the default behavior of playing forward.
     */
    public void reverse() {
        mPlayingBackwards = !mPlayingBackwards;
        if (mPlayingState == RUNNING) {
            long currentTime = AnimationUtils.currentAnimationTimeMillis();
            long currentPlayTime = currentTime - mStartTime;
            long timeLeft = mDuration - currentPlayTime;
            mStartTime = currentTime - timeLeft;
        } else {
            start(true);
        }
    }

    /**
     * Called internally to end an animation by removing it from the animations list. Must be
     * called on the UI thread.
     */
    private void endAnimation() {
        sAnimations.get().remove(this);
        sPendingAnimations.get().remove(this);
        sDelayedAnims.get().remove(this);
        mPlayingState = STOPPED;
        if (mListeners != null) {
            ArrayList<AnimatorListener> tmpListeners =
                    (ArrayList<AnimatorListener>) mListeners.clone();
            int numListeners = tmpListeners.size();
            for (int i = 0; i < numListeners; ++i) {
                tmpListeners.get(i).onAnimationEnd(this);
            }
        }
    }

    /**
     * Called internally to start an animation by adding it to the active animations list. Must be
     * called on the UI thread.
     */
    private void startAnimation() {
        initAnimation();
        sAnimations.get().add(this);
        if (mStartDelay > 0 && mListeners != null) {
            // Listeners were already notified in start() if startDelay is 0; this is
            // just for delayed animations
            ArrayList<AnimatorListener> tmpListeners =
                    (ArrayList<AnimatorListener>) mListeners.clone();
            int numListeners = tmpListeners.size();
            for (int i = 0; i < numListeners; ++i) {
                tmpListeners.get(i).onAnimationStart(this);
            }
        }
    }

    /**
     * Internal function called to process an animation frame on an animation that is currently
     * sleeping through its <code>startDelay</code> phase. The return value indicates whether it
     * should be woken up and put on the active animations queue.
     *
     * @param currentTime The current animation time, used to calculate whether the animation
     * has exceeded its <code>startDelay</code> and should be started.
     * @return True if the animation's <code>startDelay</code> has been exceeded and the animation
     * should be added to the set of active animations.
     */
    private boolean delayedAnimationFrame(long currentTime) {
        if (!mStartedDelay) {
            mStartedDelay = true;
            mDelayStartTime = currentTime;
        } else {
            long deltaTime = currentTime - mDelayStartTime;
            if (deltaTime > mStartDelay) {
                // startDelay ended - start the anim and record the
                // mStartTime appropriately
                mStartTime = currentTime - (deltaTime - mStartDelay);
                mPlayingState = RUNNING;
                return true;
            }
        }
        return false;
    }

    /**
     * This internal function processes a single animation frame for a given animation. The
     * currentTime parameter is the timing pulse sent by the handler, used to calculate the
     * elapsed duration, and therefore
     * the elapsed fraction, of the animation. The return value indicates whether the animation
     * should be ended (which happens when the elapsed time of the animation exceeds the
     * animation's duration, including the repeatCount).
     *
     * @param currentTime The current time, as tracked by the static timing handler
     * @return true if the animation's duration, including any repetitions due to
     * <code>repeatCount</code> has been exceeded and the animation should be ended.
     */
    boolean animationFrame(long currentTime) {
        boolean done = false;

        if (mPlayingState == STOPPED) {
            mPlayingState = RUNNING;
            if (mSeekTime < 0) {
                mStartTime = currentTime;
            } else {
                mStartTime = currentTime - mSeekTime;
                // Now that we're playing, reset the seek time
                mSeekTime = -1;
            }
        }
        switch (mPlayingState) {
        case RUNNING:
        case SEEKED:
            float fraction = mDuration > 0 ? (float)(currentTime - mStartTime) / mDuration : 1f;
            if (fraction >= 1f) {
                if (mCurrentIteration < mRepeatCount || mRepeatCount == INFINITE) {
                    // Time to repeat
                    if (mListeners != null) {
                        int numListeners = mListeners.size();
                        for (int i = 0; i < numListeners; ++i) {
                            mListeners.get(i).onAnimationRepeat(this);
                        }
                    }
                    if (mRepeatMode == REVERSE) {
                        mPlayingBackwards = mPlayingBackwards ? false : true;
                    }
                    mCurrentIteration += (int)fraction;
                    fraction = fraction % 1f;
                    mStartTime += mDuration;
                } else {
                    done = true;
                    fraction = Math.min(fraction, 1.0f);
                }
            }
            if (mPlayingBackwards) {
                fraction = 1f - fraction;
            }
            animateValue(fraction);
            break;
        }

        return done;
    }

    /**
     * Returns the current animation fraction, which is the elapsed/interpolated fraction used in
     * the most recent frame update on the animation.
     *
     * @return Elapsed/interpolated fraction of the animation.
     */
    public float getAnimatedFraction() {
        return mCurrentFraction;
    }

    /**
     * This method is called with the elapsed fraction of the animation during every
     * animation frame. This function turns the elapsed fraction into an interpolated fraction
     * and then into an animated value (from the evaluator. The function is called mostly during
     * animation updates, but it is also called when the <code>end()</code>
     * function is called, to set the final value on the property.
     *
     * <p>Overrides of this method must call the superclass to perform the calculation
     * of the animated value.</p>
     *
     * @param fraction The elapsed fraction of the animation.
     */
    void animateValue(float fraction) {
        fraction = mInterpolator.getInterpolation(fraction);
        mCurrentFraction = fraction;
        int numValues = mValues.length;
        for (int i = 0; i < numValues; ++i) {
            mValues[i].calculateValue(fraction);
        }
        if (mUpdateListeners != null) {
            int numListeners = mUpdateListeners.size();
            for (int i = 0; i < numListeners; ++i) {
                mUpdateListeners.get(i).onAnimationUpdate(this);
            }
        }
    }

    @Override
    public ValueAnimator clone() {
        final ValueAnimator anim = (ValueAnimator) super.clone();
        if (mUpdateListeners != null) {
            ArrayList<AnimatorUpdateListener> oldListeners = mUpdateListeners;
            anim.mUpdateListeners = new ArrayList<AnimatorUpdateListener>();
            int numListeners = oldListeners.size();
            for (int i = 0; i < numListeners; ++i) {
                anim.mUpdateListeners.add(oldListeners.get(i));
            }
        }
        anim.mSeekTime = -1;
        anim.mPlayingBackwards = false;
        anim.mCurrentIteration = 0;
        anim.mInitialized = false;
        anim.mPlayingState = STOPPED;
        anim.mStartedDelay = false;
        PropertyValuesHolder[] oldValues = mValues;
        if (oldValues != null) {
            int numValues = oldValues.length;
            anim.mValues = new PropertyValuesHolder[numValues];
            anim.mValuesMap = new HashMap<String, PropertyValuesHolder>(numValues);
            for (int i = 0; i < numValues; ++i) {
                PropertyValuesHolder newValuesHolder = oldValues[i].clone();
                anim.mValues[i] = newValuesHolder;
                anim.mValuesMap.put(newValuesHolder.getPropertyName(), newValuesHolder);
            }
        }
        return anim;
    }

    /**
     * Implementors of this interface can add themselves as update listeners
     * to an <code>ValueAnimator</code> instance to receive callbacks on every animation
     * frame, after the current frame's values have been calculated for that
     * <code>ValueAnimator</code>.
     */
    public static interface AnimatorUpdateListener {
        /**
         * <p>Notifies the occurrence of another frame of the animation.</p>
         *
         * @param animation The animation which was repeated.
         */
        void onAnimationUpdate(ValueAnimator animation);

    }

    /**
     * Return the number of animations currently running.
     *
     * Used by StrictMode internally to annotate violations.  Only
     * called on the main thread.
     *
     * @hide
     */
    public static int getCurrentAnimationsCount() {
        return sAnimations.get().size();
    }

    /**
     * Clear all animations on this thread, without canceling or ending them.
     * This should be used with caution.
     *
     * @hide
     */
    public static void clearAllAnimations() {
        sAnimations.get().clear();
        sPendingAnimations.get().clear();
        sDelayedAnims.get().clear();
    }

    @Override
    public String toString() {
        String returnVal = "ValueAnimator@" + Integer.toHexString(hashCode());
        if (mValues != null) {
            for (int i = 0; i < mValues.length; ++i) {
                returnVal += "\n    " + mValues[i].toString();
            }
        }
        return returnVal;
    }
}