| /* |
| * Copyright (C) 2007 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <stdlib.h> |
| #include <stdint.h> |
| #include <math.h> |
| #include <sys/types.h> |
| |
| #include <utils/Errors.h> |
| #include <utils/Log.h> |
| #include <utils/StopWatch.h> |
| |
| #include <ui/GraphicBuffer.h> |
| #include <ui/PixelFormat.h> |
| #include <ui/FramebufferNativeWindow.h> |
| #include <ui/Rect.h> |
| #include <ui/Region.h> |
| |
| #include <hardware/copybit.h> |
| |
| #include "LayerBuffer.h" |
| #include "SurfaceFlinger.h" |
| #include "DisplayHardware/DisplayHardware.h" |
| |
| namespace android { |
| |
| // --------------------------------------------------------------------------- |
| |
| const uint32_t LayerBuffer::typeInfo = LayerBaseClient::typeInfo | 0x20; |
| const char* const LayerBuffer::typeID = "LayerBuffer"; |
| gralloc_module_t const* LayerBuffer::sGrallocModule = 0; |
| |
| // --------------------------------------------------------------------------- |
| |
| LayerBuffer::LayerBuffer(SurfaceFlinger* flinger, DisplayID display, |
| const sp<Client>& client, int32_t i) |
| : LayerBaseClient(flinger, display, client, i), |
| mNeedsBlending(false), mBlitEngine(0) |
| { |
| } |
| |
| LayerBuffer::~LayerBuffer() |
| { |
| if (mBlitEngine) { |
| copybit_close(mBlitEngine); |
| } |
| } |
| |
| void LayerBuffer::onFirstRef() |
| { |
| LayerBaseClient::onFirstRef(); |
| mSurface = new SurfaceLayerBuffer(mFlinger, clientIndex(), |
| const_cast<LayerBuffer *>(this)); |
| |
| hw_module_t const* module = (hw_module_t const*)sGrallocModule; |
| if (!module) { |
| // NOTE: technically there is a race here, but it shouldn't |
| // cause any problem since hw_get_module() always returns |
| // the same value. |
| if (hw_get_module(GRALLOC_HARDWARE_MODULE_ID, &module) == 0) { |
| sGrallocModule = (gralloc_module_t const *)module; |
| } |
| } |
| |
| if (hw_get_module(COPYBIT_HARDWARE_MODULE_ID, &module) == 0) { |
| copybit_open(module, &mBlitEngine); |
| } |
| } |
| |
| sp<LayerBaseClient::Surface> LayerBuffer::createSurface() const |
| { |
| return mSurface; |
| } |
| |
| status_t LayerBuffer::ditch() |
| { |
| mSurface.clear(); |
| return NO_ERROR; |
| } |
| |
| bool LayerBuffer::needsBlending() const { |
| return mNeedsBlending; |
| } |
| |
| void LayerBuffer::setNeedsBlending(bool blending) { |
| mNeedsBlending = blending; |
| } |
| |
| void LayerBuffer::postBuffer(ssize_t offset) |
| { |
| sp<Source> source(getSource()); |
| if (source != 0) |
| source->postBuffer(offset); |
| } |
| |
| void LayerBuffer::unregisterBuffers() |
| { |
| sp<Source> source(clearSource()); |
| if (source != 0) |
| source->unregisterBuffers(); |
| } |
| |
| uint32_t LayerBuffer::doTransaction(uint32_t flags) |
| { |
| sp<Source> source(getSource()); |
| if (source != 0) |
| source->onTransaction(flags); |
| uint32_t res = LayerBase::doTransaction(flags); |
| // we always want filtering for these surfaces |
| mUseLinearFiltering = !(mFlags & DisplayHardware::SLOW_CONFIG); |
| return res; |
| } |
| |
| void LayerBuffer::unlockPageFlip(const Transform& planeTransform, |
| Region& outDirtyRegion) |
| { |
| // this code-path must be as tight as possible, it's called each time |
| // the screen is composited. |
| sp<Source> source(getSource()); |
| if (source != 0) |
| source->onVisibilityResolved(planeTransform); |
| LayerBase::unlockPageFlip(planeTransform, outDirtyRegion); |
| } |
| |
| void LayerBuffer::onDraw(const Region& clip) const |
| { |
| sp<Source> source(getSource()); |
| if (LIKELY(source != 0)) { |
| source->onDraw(clip); |
| } else { |
| clearWithOpenGL(clip); |
| } |
| } |
| |
| bool LayerBuffer::transformed() const |
| { |
| sp<Source> source(getSource()); |
| if (LIKELY(source != 0)) |
| return source->transformed(); |
| return false; |
| } |
| |
| void LayerBuffer::serverDestroy() |
| { |
| sp<Source> source(clearSource()); |
| if (source != 0) { |
| source->destroy(); |
| } |
| } |
| |
| /** |
| * This creates a "buffer" source for this surface |
| */ |
| status_t LayerBuffer::registerBuffers(const ISurface::BufferHeap& buffers) |
| { |
| Mutex::Autolock _l(mLock); |
| if (mSource != 0) |
| return INVALID_OPERATION; |
| |
| sp<BufferSource> source = new BufferSource(*this, buffers); |
| |
| status_t result = source->getStatus(); |
| if (result == NO_ERROR) { |
| mSource = source; |
| } |
| return result; |
| } |
| |
| /** |
| * This creates an "overlay" source for this surface |
| */ |
| sp<OverlayRef> LayerBuffer::createOverlay(uint32_t w, uint32_t h, int32_t f, |
| int32_t orientation) |
| { |
| sp<OverlayRef> result; |
| Mutex::Autolock _l(mLock); |
| if (mSource != 0) |
| return result; |
| |
| sp<OverlaySource> source = new OverlaySource(*this, &result, w, h, f, orientation); |
| if (result != 0) { |
| mSource = source; |
| } |
| return result; |
| } |
| |
| sp<LayerBuffer::Source> LayerBuffer::getSource() const { |
| Mutex::Autolock _l(mLock); |
| return mSource; |
| } |
| |
| sp<LayerBuffer::Source> LayerBuffer::clearSource() { |
| sp<Source> source; |
| Mutex::Autolock _l(mLock); |
| source = mSource; |
| mSource.clear(); |
| return source; |
| } |
| |
| // ============================================================================ |
| // LayerBuffer::SurfaceLayerBuffer |
| // ============================================================================ |
| |
| LayerBuffer::SurfaceLayerBuffer::SurfaceLayerBuffer(const sp<SurfaceFlinger>& flinger, |
| SurfaceID id, const sp<LayerBuffer>& owner) |
| : LayerBaseClient::Surface(flinger, id, owner->getIdentity(), owner) |
| { |
| } |
| |
| LayerBuffer::SurfaceLayerBuffer::~SurfaceLayerBuffer() |
| { |
| unregisterBuffers(); |
| } |
| |
| status_t LayerBuffer::SurfaceLayerBuffer::registerBuffers( |
| const ISurface::BufferHeap& buffers) |
| { |
| sp<LayerBuffer> owner(getOwner()); |
| if (owner != 0) |
| return owner->registerBuffers(buffers); |
| return NO_INIT; |
| } |
| |
| void LayerBuffer::SurfaceLayerBuffer::postBuffer(ssize_t offset) |
| { |
| sp<LayerBuffer> owner(getOwner()); |
| if (owner != 0) |
| owner->postBuffer(offset); |
| } |
| |
| void LayerBuffer::SurfaceLayerBuffer::unregisterBuffers() |
| { |
| sp<LayerBuffer> owner(getOwner()); |
| if (owner != 0) |
| owner->unregisterBuffers(); |
| } |
| |
| sp<OverlayRef> LayerBuffer::SurfaceLayerBuffer::createOverlay( |
| uint32_t w, uint32_t h, int32_t format, int32_t orientation) { |
| sp<OverlayRef> result; |
| sp<LayerBuffer> owner(getOwner()); |
| if (owner != 0) |
| result = owner->createOverlay(w, h, format, orientation); |
| return result; |
| } |
| |
| // ============================================================================ |
| // LayerBuffer::Buffer |
| // ============================================================================ |
| |
| LayerBuffer::Buffer::Buffer(const ISurface::BufferHeap& buffers, ssize_t offset) |
| : mBufferHeap(buffers), mSupportsCopybit(false) |
| { |
| NativeBuffer& src(mNativeBuffer); |
| src.crop.l = 0; |
| src.crop.t = 0; |
| src.crop.r = buffers.w; |
| src.crop.b = buffers.h; |
| |
| src.img.w = buffers.hor_stride ?: buffers.w; |
| src.img.h = buffers.ver_stride ?: buffers.h; |
| src.img.format = buffers.format; |
| src.img.base = (void*)(intptr_t(buffers.heap->base()) + offset); |
| src.img.handle = 0; |
| |
| gralloc_module_t const * module = LayerBuffer::getGrallocModule(); |
| if (module && module->perform) { |
| int err = module->perform(module, |
| GRALLOC_MODULE_PERFORM_CREATE_HANDLE_FROM_BUFFER, |
| buffers.heap->heapID(), buffers.heap->getSize(), |
| offset, buffers.heap->base(), |
| &src.img.handle); |
| |
| // we can fail here is the passed buffer is purely software |
| mSupportsCopybit = (err == NO_ERROR); |
| } |
| } |
| |
| LayerBuffer::Buffer::~Buffer() |
| { |
| NativeBuffer& src(mNativeBuffer); |
| if (src.img.handle) { |
| native_handle_delete(src.img.handle); |
| } |
| } |
| |
| // ============================================================================ |
| // LayerBuffer::Source |
| // LayerBuffer::BufferSource |
| // LayerBuffer::OverlaySource |
| // ============================================================================ |
| |
| LayerBuffer::Source::Source(LayerBuffer& layer) |
| : mLayer(layer) |
| { |
| } |
| LayerBuffer::Source::~Source() { |
| } |
| void LayerBuffer::Source::onDraw(const Region& clip) const { |
| } |
| void LayerBuffer::Source::onTransaction(uint32_t flags) { |
| } |
| void LayerBuffer::Source::onVisibilityResolved( |
| const Transform& planeTransform) { |
| } |
| void LayerBuffer::Source::postBuffer(ssize_t offset) { |
| } |
| void LayerBuffer::Source::unregisterBuffers() { |
| } |
| bool LayerBuffer::Source::transformed() const { |
| return mLayer.mTransformed; |
| } |
| |
| // --------------------------------------------------------------------------- |
| |
| LayerBuffer::BufferSource::BufferSource(LayerBuffer& layer, |
| const ISurface::BufferHeap& buffers) |
| : Source(layer), mStatus(NO_ERROR), mBufferSize(0), |
| mUseEGLImageDirectly(true) |
| { |
| if (buffers.heap == NULL) { |
| // this is allowed, but in this case, it is illegal to receive |
| // postBuffer(). The surface just erases the framebuffer with |
| // fully transparent pixels. |
| mBufferHeap = buffers; |
| mLayer.setNeedsBlending(false); |
| return; |
| } |
| |
| status_t err = (buffers.heap->heapID() >= 0) ? NO_ERROR : NO_INIT; |
| if (err != NO_ERROR) { |
| LOGE("LayerBuffer::BufferSource: invalid heap (%s)", strerror(err)); |
| mStatus = err; |
| return; |
| } |
| |
| PixelFormatInfo info; |
| err = getPixelFormatInfo(buffers.format, &info); |
| if (err != NO_ERROR) { |
| LOGE("LayerBuffer::BufferSource: invalid format %d (%s)", |
| buffers.format, strerror(err)); |
| mStatus = err; |
| return; |
| } |
| |
| if (buffers.hor_stride<0 || buffers.ver_stride<0) { |
| LOGE("LayerBuffer::BufferSource: invalid parameters " |
| "(w=%d, h=%d, xs=%d, ys=%d)", |
| buffers.w, buffers.h, buffers.hor_stride, buffers.ver_stride); |
| mStatus = BAD_VALUE; |
| return; |
| } |
| |
| mBufferHeap = buffers; |
| mLayer.setNeedsBlending((info.h_alpha - info.l_alpha) > 0); |
| mBufferSize = info.getScanlineSize(buffers.hor_stride)*buffers.ver_stride; |
| mLayer.forceVisibilityTransaction(); |
| } |
| |
| LayerBuffer::BufferSource::~BufferSource() |
| { |
| class MessageDestroyTexture : public MessageBase { |
| SurfaceFlinger* flinger; |
| GLuint name; |
| public: |
| MessageDestroyTexture( |
| SurfaceFlinger* flinger, GLuint name) |
| : flinger(flinger), name(name) { } |
| virtual bool handler() { |
| glDeleteTextures(1, &name); |
| return true; |
| } |
| }; |
| |
| if (mTexture.name != -1U) { |
| // GL textures can only be destroyed from the GL thread |
| mLayer.mFlinger->mEventQueue.postMessage( |
| new MessageDestroyTexture(mLayer.mFlinger.get(), mTexture.name) ); |
| } |
| if (mTexture.image != EGL_NO_IMAGE_KHR) { |
| EGLDisplay dpy(mLayer.mFlinger->graphicPlane(0).getEGLDisplay()); |
| eglDestroyImageKHR(dpy, mTexture.image); |
| } |
| } |
| |
| void LayerBuffer::BufferSource::postBuffer(ssize_t offset) |
| { |
| ISurface::BufferHeap buffers; |
| { // scope for the lock |
| Mutex::Autolock _l(mBufferSourceLock); |
| buffers = mBufferHeap; |
| if (buffers.heap != 0) { |
| const size_t memorySize = buffers.heap->getSize(); |
| if ((size_t(offset) + mBufferSize) > memorySize) { |
| LOGE("LayerBuffer::BufferSource::postBuffer() " |
| "invalid buffer (offset=%d, size=%d, heap-size=%d", |
| int(offset), int(mBufferSize), int(memorySize)); |
| return; |
| } |
| } |
| } |
| |
| sp<Buffer> buffer; |
| if (buffers.heap != 0) { |
| buffer = new LayerBuffer::Buffer(buffers, offset); |
| if (buffer->getStatus() != NO_ERROR) |
| buffer.clear(); |
| setBuffer(buffer); |
| mLayer.invalidate(); |
| } |
| } |
| |
| void LayerBuffer::BufferSource::unregisterBuffers() |
| { |
| Mutex::Autolock _l(mBufferSourceLock); |
| mBufferHeap.heap.clear(); |
| mBuffer.clear(); |
| mLayer.invalidate(); |
| } |
| |
| sp<LayerBuffer::Buffer> LayerBuffer::BufferSource::getBuffer() const |
| { |
| Mutex::Autolock _l(mBufferSourceLock); |
| return mBuffer; |
| } |
| |
| void LayerBuffer::BufferSource::setBuffer(const sp<LayerBuffer::Buffer>& buffer) |
| { |
| Mutex::Autolock _l(mBufferSourceLock); |
| mBuffer = buffer; |
| } |
| |
| bool LayerBuffer::BufferSource::transformed() const |
| { |
| return mBufferHeap.transform ? true : Source::transformed(); |
| } |
| |
| void LayerBuffer::BufferSource::onDraw(const Region& clip) const |
| { |
| sp<Buffer> ourBuffer(getBuffer()); |
| if (UNLIKELY(ourBuffer == 0)) { |
| // nothing to do, we don't have a buffer |
| mLayer.clearWithOpenGL(clip); |
| return; |
| } |
| |
| status_t err = NO_ERROR; |
| NativeBuffer src(ourBuffer->getBuffer()); |
| const Rect transformedBounds(mLayer.getTransformedBounds()); |
| |
| if (UNLIKELY(mTexture.name == -1LU)) { |
| mTexture.name = mLayer.createTexture(); |
| } |
| |
| #if defined(EGL_ANDROID_image_native_buffer) |
| if (mLayer.mFlags & DisplayHardware::DIRECT_TEXTURE) { |
| err = INVALID_OPERATION; |
| if (ourBuffer->supportsCopybit()) { |
| // First, try to use the buffer as an EGLImage directly |
| if (mUseEGLImageDirectly) { |
| // NOTE: Assume the buffer is allocated with the proper USAGE flags |
| |
| sp<GraphicBuffer> buffer = new GraphicBuffer( |
| src.img.w, src.img.h, src.img.format, |
| GraphicBuffer::USAGE_HW_TEXTURE, |
| src.img.w, src.img.handle, false); |
| |
| err = mLayer.initializeEglImage(buffer, &mTexture); |
| if (err != NO_ERROR) { |
| mUseEGLImageDirectly = false; |
| } |
| } |
| copybit_device_t* copybit = mLayer.mBlitEngine; |
| if (copybit && err != NO_ERROR) { |
| // create our EGLImageKHR the first time |
| err = initTempBuffer(); |
| if (err == NO_ERROR) { |
| // NOTE: Assume the buffer is allocated with the proper USAGE flags |
| const NativeBuffer& dst(mTempBuffer); |
| region_iterator clip(Region(Rect(dst.crop.r, dst.crop.b))); |
| copybit->set_parameter(copybit, COPYBIT_TRANSFORM, 0); |
| copybit->set_parameter(copybit, COPYBIT_PLANE_ALPHA, 0xFF); |
| copybit->set_parameter(copybit, COPYBIT_DITHER, COPYBIT_ENABLE); |
| err = copybit->stretch(copybit, &dst.img, &src.img, |
| &dst.crop, &src.crop, &clip); |
| if (err != NO_ERROR) { |
| clearTempBufferImage(); |
| } |
| } |
| } |
| } |
| } |
| #endif |
| else { |
| err = INVALID_OPERATION; |
| } |
| |
| if (err != NO_ERROR) { |
| // slower fallback |
| GGLSurface t; |
| t.version = sizeof(GGLSurface); |
| t.width = src.crop.r; |
| t.height = src.crop.b; |
| t.stride = src.img.w; |
| t.vstride= src.img.h; |
| t.format = src.img.format; |
| t.data = (GGLubyte*)src.img.base; |
| const Region dirty(Rect(t.width, t.height)); |
| mLayer.loadTexture(&mTexture, dirty, t); |
| } |
| |
| mTexture.transform = mBufferHeap.transform; |
| mLayer.drawWithOpenGL(clip, mTexture); |
| } |
| |
| status_t LayerBuffer::BufferSource::initTempBuffer() const |
| { |
| // figure out the size we need now |
| const ISurface::BufferHeap& buffers(mBufferHeap); |
| uint32_t w = mLayer.mTransformedBounds.width(); |
| uint32_t h = mLayer.mTransformedBounds.height(); |
| if (buffers.w * h != buffers.h * w) { |
| int t = w; w = h; h = t; |
| } |
| |
| // we're in the copybit case, so make sure we can handle this blit |
| // we don't have to keep the aspect ratio here |
| copybit_device_t* copybit = mLayer.mBlitEngine; |
| const int down = copybit->get(copybit, COPYBIT_MINIFICATION_LIMIT); |
| const int up = copybit->get(copybit, COPYBIT_MAGNIFICATION_LIMIT); |
| if (buffers.w > w*down) w = buffers.w / down; |
| else if (w > buffers.w*up) w = buffers.w*up; |
| if (buffers.h > h*down) h = buffers.h / down; |
| else if (h > buffers.h*up) h = buffers.h*up; |
| |
| if (mTexture.image != EGL_NO_IMAGE_KHR) { |
| // we have an EGLImage, make sure the needed size didn't change |
| if (w!=mTexture.width || h!= mTexture.height) { |
| // delete the EGLImage and texture |
| clearTempBufferImage(); |
| } else { |
| // we're good, we have an EGLImageKHR and it's (still) the |
| // right size |
| return NO_ERROR; |
| } |
| } |
| |
| // figure out if we need linear filtering |
| if (buffers.w * h == buffers.h * w) { |
| // same pixel area, don't use filtering |
| mLayer.mUseLinearFiltering = false; |
| } |
| |
| // Allocate a temporary buffer and create the corresponding EGLImageKHR |
| // once the EGLImage has been created we don't need the |
| // graphic buffer reference anymore. |
| sp<GraphicBuffer> buffer = new GraphicBuffer( |
| w, h, HAL_PIXEL_FORMAT_RGB_565, |
| GraphicBuffer::USAGE_HW_TEXTURE | |
| GraphicBuffer::USAGE_HW_2D); |
| |
| status_t err = buffer->initCheck(); |
| if (err == NO_ERROR) { |
| NativeBuffer& dst(mTempBuffer); |
| dst.img.w = buffer->getStride(); |
| dst.img.h = h; |
| dst.img.format = buffer->getPixelFormat(); |
| dst.img.handle = (native_handle_t *)buffer->handle; |
| dst.img.base = 0; |
| dst.crop.l = 0; |
| dst.crop.t = 0; |
| dst.crop.r = w; |
| dst.crop.b = h; |
| |
| err = mLayer.initializeEglImage(buffer, &mTexture); |
| } |
| |
| return err; |
| } |
| |
| void LayerBuffer::BufferSource::clearTempBufferImage() const |
| { |
| // delete the image |
| EGLDisplay dpy(mLayer.mFlinger->graphicPlane(0).getEGLDisplay()); |
| eglDestroyImageKHR(dpy, mTexture.image); |
| |
| // and the associated texture (recreate a name) |
| glDeleteTextures(1, &mTexture.name); |
| Texture defaultTexture; |
| mTexture = defaultTexture; |
| mTexture.name = mLayer.createTexture(); |
| } |
| |
| // --------------------------------------------------------------------------- |
| |
| LayerBuffer::OverlaySource::OverlaySource(LayerBuffer& layer, |
| sp<OverlayRef>* overlayRef, |
| uint32_t w, uint32_t h, int32_t format, int32_t orientation) |
| : Source(layer), mVisibilityChanged(false), |
| mOverlay(0), mOverlayHandle(0), mOverlayDevice(0), mOrientation(orientation) |
| { |
| overlay_control_device_t* overlay_dev = mLayer.mFlinger->getOverlayEngine(); |
| if (overlay_dev == NULL) { |
| // overlays not supported |
| return; |
| } |
| |
| mOverlayDevice = overlay_dev; |
| overlay_t* overlay = overlay_dev->createOverlay(overlay_dev, w, h, format); |
| if (overlay == NULL) { |
| // couldn't create the overlay (no memory? no more overlays?) |
| return; |
| } |
| |
| // enable dithering... |
| overlay_dev->setParameter(overlay_dev, overlay, |
| OVERLAY_DITHER, OVERLAY_ENABLE); |
| |
| mOverlay = overlay; |
| mWidth = overlay->w; |
| mHeight = overlay->h; |
| mFormat = overlay->format; |
| mWidthStride = overlay->w_stride; |
| mHeightStride = overlay->h_stride; |
| mInitialized = false; |
| |
| mOverlayHandle = overlay->getHandleRef(overlay); |
| |
| sp<OverlayChannel> channel = new OverlayChannel( &layer ); |
| |
| *overlayRef = new OverlayRef(mOverlayHandle, channel, |
| mWidth, mHeight, mFormat, mWidthStride, mHeightStride); |
| mLayer.mFlinger->signalEvent(); |
| } |
| |
| LayerBuffer::OverlaySource::~OverlaySource() |
| { |
| if (mOverlay && mOverlayDevice) { |
| overlay_control_device_t* overlay_dev = mOverlayDevice; |
| overlay_dev->destroyOverlay(overlay_dev, mOverlay); |
| } |
| } |
| |
| void LayerBuffer::OverlaySource::onDraw(const Region& clip) const |
| { |
| // this would be where the color-key would be set, should we need it. |
| GLclampx red = 0; |
| GLclampx green = 0; |
| GLclampx blue = 0; |
| mLayer.clearWithOpenGL(clip, red, green, blue, 0); |
| } |
| |
| void LayerBuffer::OverlaySource::onTransaction(uint32_t flags) |
| { |
| const Layer::State& front(mLayer.drawingState()); |
| const Layer::State& temp(mLayer.currentState()); |
| if (temp.sequence != front.sequence) { |
| mVisibilityChanged = true; |
| } |
| } |
| |
| void LayerBuffer::OverlaySource::onVisibilityResolved( |
| const Transform& planeTransform) |
| { |
| // this code-path must be as tight as possible, it's called each time |
| // the screen is composited. |
| if (UNLIKELY(mOverlay != 0)) { |
| if (mVisibilityChanged || !mInitialized) { |
| mVisibilityChanged = false; |
| mInitialized = true; |
| const Rect bounds(mLayer.getTransformedBounds()); |
| int x = bounds.left; |
| int y = bounds.top; |
| int w = bounds.width(); |
| int h = bounds.height(); |
| |
| // we need a lock here to protect "destroy" |
| Mutex::Autolock _l(mOverlaySourceLock); |
| if (mOverlay) { |
| overlay_control_device_t* overlay_dev = mOverlayDevice; |
| overlay_dev->setPosition(overlay_dev, mOverlay, x,y,w,h); |
| // we need to combine the layer orientation and the |
| // user-requested orientation. |
| Transform finalTransform = Transform(mOrientation) * |
| Transform(mLayer.getOrientation()); |
| overlay_dev->setParameter(overlay_dev, mOverlay, |
| OVERLAY_TRANSFORM, finalTransform.getOrientation()); |
| overlay_dev->commit(overlay_dev, mOverlay); |
| } |
| } |
| } |
| } |
| |
| void LayerBuffer::OverlaySource::destroy() |
| { |
| // we need a lock here to protect "onVisibilityResolved" |
| Mutex::Autolock _l(mOverlaySourceLock); |
| if (mOverlay && mOverlayDevice) { |
| overlay_control_device_t* overlay_dev = mOverlayDevice; |
| overlay_dev->destroyOverlay(overlay_dev, mOverlay); |
| mOverlay = 0; |
| } |
| } |
| |
| // --------------------------------------------------------------------------- |
| }; // namespace android |