| /* |
| * Copyright (C) 2006 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.text; |
| |
| import android.graphics.Paint; |
| import android.text.style.LeadingMarginSpan; |
| import android.text.style.LeadingMarginSpan.LeadingMarginSpan2; |
| import android.text.style.LineHeightSpan; |
| import android.text.style.MetricAffectingSpan; |
| import android.text.style.TabStopSpan; |
| import android.util.Log; |
| import android.util.Pools.SynchronizedPool; |
| |
| import com.android.internal.util.ArrayUtils; |
| import com.android.internal.util.GrowingArrayUtils; |
| |
| import java.util.Arrays; |
| import java.util.Locale; |
| |
| /** |
| * StaticLayout is a Layout for text that will not be edited after it |
| * is laid out. Use {@link DynamicLayout} for text that may change. |
| * <p>This is used by widgets to control text layout. You should not need |
| * to use this class directly unless you are implementing your own widget |
| * or custom display object, or would be tempted to call |
| * {@link android.graphics.Canvas#drawText(java.lang.CharSequence, int, int, |
| * float, float, android.graphics.Paint) |
| * Canvas.drawText()} directly.</p> |
| */ |
| public class StaticLayout extends Layout { |
| |
| static final String TAG = "StaticLayout"; |
| |
| /** |
| * Builder for static layouts. It would be better if this were a public |
| * API (as it would offer much greater flexibility for adding new options) |
| * but for the time being it's just internal. |
| * |
| * @hide |
| */ |
| public final static class Builder { |
| private Builder() { |
| mNativePtr = nNewBuilder(); |
| } |
| |
| public static Builder obtain(CharSequence source, int start, int end, int width) { |
| Builder b = sPool.acquire(); |
| if (b == null) { |
| b = new Builder(); |
| } |
| |
| // set default initial values |
| b.mText = source; |
| b.mStart = start; |
| b.mEnd = end; |
| b.mWidth = width; |
| b.mAlignment = Alignment.ALIGN_NORMAL; |
| b.mTextDir = TextDirectionHeuristics.FIRSTSTRONG_LTR; |
| b.mSpacingMult = 1.0f; |
| b.mSpacingAdd = 0.0f; |
| b.mIncludePad = true; |
| b.mEllipsizedWidth = width; |
| b.mEllipsize = null; |
| b.mMaxLines = Integer.MAX_VALUE; |
| |
| b.mMeasuredText = MeasuredText.obtain(); |
| return b; |
| } |
| |
| private static void recycle(Builder b) { |
| b.mPaint = null; |
| b.mText = null; |
| MeasuredText.recycle(b.mMeasuredText); |
| sPool.release(b); |
| } |
| |
| // release any expensive state |
| /* package */ void finish() { |
| nFinishBuilder(mNativePtr); |
| mMeasuredText.finish(); |
| } |
| |
| public Builder setText(CharSequence source) { |
| return setText(source, 0, source.length()); |
| } |
| |
| public Builder setText(CharSequence source, int start, int end) { |
| mText = source; |
| mStart = start; |
| mEnd = end; |
| return this; |
| } |
| |
| public Builder setPaint(TextPaint paint) { |
| mPaint = paint; |
| return this; |
| } |
| |
| public Builder setWidth(int width) { |
| mWidth = width; |
| if (mEllipsize == null) { |
| mEllipsizedWidth = width; |
| } |
| return this; |
| } |
| |
| public Builder setAlignment(Alignment alignment) { |
| mAlignment = alignment; |
| return this; |
| } |
| |
| public Builder setTextDir(TextDirectionHeuristic textDir) { |
| mTextDir = textDir; |
| return this; |
| } |
| |
| // TODO: combine the following, as they're almost always set together? |
| public Builder setSpacingMult(float spacingMult) { |
| mSpacingMult = spacingMult; |
| return this; |
| } |
| |
| public Builder setSpacingAdd(float spacingAdd) { |
| mSpacingAdd = spacingAdd; |
| return this; |
| } |
| |
| public Builder setIncludePad(boolean includePad) { |
| mIncludePad = includePad; |
| return this; |
| } |
| |
| // TODO: combine the following? |
| public Builder setEllipsizedWidth(int ellipsizedWidth) { |
| mEllipsizedWidth = ellipsizedWidth; |
| return this; |
| } |
| |
| public Builder setEllipsize(TextUtils.TruncateAt ellipsize) { |
| mEllipsize = ellipsize; |
| return this; |
| } |
| |
| public Builder setMaxLines(int maxLines) { |
| mMaxLines = maxLines; |
| return this; |
| } |
| |
| public Builder setBreakStrategy(@BreakStrategy int breakStrategy) { |
| mBreakStrategy = breakStrategy; |
| return this; |
| } |
| |
| public Builder setIndents(int[] leftIndents, int[] rightIndents) { |
| int leftLen = leftIndents == null ? 0 : leftIndents.length; |
| int rightLen = rightIndents == null ? 0 : rightIndents.length; |
| int[] indents = new int[Math.max(leftLen, rightLen)]; |
| for (int i = 0; i < indents.length; i++) { |
| int leftMargin = i < leftLen ? leftIndents[i] : 0; |
| int rightMargin = i < rightLen ? rightIndents[i] : 0; |
| indents[i] = leftMargin + rightMargin; |
| } |
| nSetIndents(mNativePtr, indents); |
| return this; |
| } |
| |
| /** |
| * Measurement and break iteration is done in native code. The protocol for using |
| * the native code is as follows. |
| * |
| * For each paragraph, do a nSetupParagraph, which sets paragraph text, line width, tab |
| * stops, break strategy (and possibly other parameters in the future). |
| * |
| * Then, for each run within the paragraph: |
| * - setLocale (this must be done at least for the first run, optional afterwards) |
| * - one of the following, depending on the type of run: |
| * + addStyleRun (a text run, to be measured in native code) |
| * + addMeasuredRun (a run already measured in Java, passed into native code) |
| * + addReplacementRun (a replacement run, width is given) |
| * |
| * After measurement, nGetWidths() is valid if the widths are needed (eg for ellipsis). |
| * Run nComputeLineBreaks() to obtain line breaks for the paragraph. |
| * |
| * After all paragraphs, call finish() to release expensive buffers. |
| */ |
| |
| private void setLocale(Locale locale) { |
| if (!locale.equals(mLocale)) { |
| nSetLocale(mNativePtr, locale.toLanguageTag(), Hyphenator.get(locale)); |
| mLocale = locale; |
| } |
| } |
| |
| /* package */ float addStyleRun(TextPaint paint, int start, int end, boolean isRtl) { |
| return nAddStyleRun(mNativePtr, paint.getNativeInstance(), paint.mNativeTypeface, |
| start, end, isRtl); |
| } |
| |
| /* package */ void addMeasuredRun(int start, int end, float[] widths) { |
| nAddMeasuredRun(mNativePtr, start, end, widths); |
| } |
| |
| /* package */ void addReplacementRun(int start, int end, float width) { |
| nAddReplacementRun(mNativePtr, start, end, width); |
| } |
| |
| public StaticLayout build() { |
| StaticLayout result = new StaticLayout(this); |
| Builder.recycle(this); |
| return result; |
| } |
| |
| @Override |
| protected void finalize() throws Throwable { |
| try { |
| nFreeBuilder(mNativePtr); |
| } finally { |
| super.finalize(); |
| } |
| } |
| |
| /* package */ long mNativePtr; |
| |
| CharSequence mText; |
| int mStart; |
| int mEnd; |
| TextPaint mPaint; |
| int mWidth; |
| Alignment mAlignment; |
| TextDirectionHeuristic mTextDir; |
| float mSpacingMult; |
| float mSpacingAdd; |
| boolean mIncludePad; |
| int mEllipsizedWidth; |
| TextUtils.TruncateAt mEllipsize; |
| int mMaxLines; |
| int mBreakStrategy; |
| |
| Paint.FontMetricsInt mFontMetricsInt = new Paint.FontMetricsInt(); |
| |
| // This will go away and be subsumed by native builder code |
| MeasuredText mMeasuredText; |
| |
| Locale mLocale; |
| |
| private static final SynchronizedPool<Builder> sPool = new SynchronizedPool<Builder>(3); |
| } |
| |
| public StaticLayout(CharSequence source, TextPaint paint, |
| int width, |
| Alignment align, float spacingmult, float spacingadd, |
| boolean includepad) { |
| this(source, 0, source.length(), paint, width, align, |
| spacingmult, spacingadd, includepad); |
| } |
| |
| /** |
| * @hide |
| */ |
| public StaticLayout(CharSequence source, TextPaint paint, |
| int width, Alignment align, TextDirectionHeuristic textDir, |
| float spacingmult, float spacingadd, |
| boolean includepad) { |
| this(source, 0, source.length(), paint, width, align, textDir, |
| spacingmult, spacingadd, includepad); |
| } |
| |
| public StaticLayout(CharSequence source, int bufstart, int bufend, |
| TextPaint paint, int outerwidth, |
| Alignment align, |
| float spacingmult, float spacingadd, |
| boolean includepad) { |
| this(source, bufstart, bufend, paint, outerwidth, align, |
| spacingmult, spacingadd, includepad, null, 0); |
| } |
| |
| /** |
| * @hide |
| */ |
| public StaticLayout(CharSequence source, int bufstart, int bufend, |
| TextPaint paint, int outerwidth, |
| Alignment align, TextDirectionHeuristic textDir, |
| float spacingmult, float spacingadd, |
| boolean includepad) { |
| this(source, bufstart, bufend, paint, outerwidth, align, textDir, |
| spacingmult, spacingadd, includepad, null, 0, Integer.MAX_VALUE); |
| } |
| |
| public StaticLayout(CharSequence source, int bufstart, int bufend, |
| TextPaint paint, int outerwidth, |
| Alignment align, |
| float spacingmult, float spacingadd, |
| boolean includepad, |
| TextUtils.TruncateAt ellipsize, int ellipsizedWidth) { |
| this(source, bufstart, bufend, paint, outerwidth, align, |
| TextDirectionHeuristics.FIRSTSTRONG_LTR, |
| spacingmult, spacingadd, includepad, ellipsize, ellipsizedWidth, Integer.MAX_VALUE); |
| } |
| |
| /** |
| * @hide |
| */ |
| public StaticLayout(CharSequence source, int bufstart, int bufend, |
| TextPaint paint, int outerwidth, |
| Alignment align, TextDirectionHeuristic textDir, |
| float spacingmult, float spacingadd, |
| boolean includepad, |
| TextUtils.TruncateAt ellipsize, int ellipsizedWidth, int maxLines) { |
| super((ellipsize == null) |
| ? source |
| : (source instanceof Spanned) |
| ? new SpannedEllipsizer(source) |
| : new Ellipsizer(source), |
| paint, outerwidth, align, textDir, spacingmult, spacingadd); |
| |
| Builder b = Builder.obtain(source, bufstart, bufend, outerwidth) |
| .setPaint(paint) |
| .setAlignment(align) |
| .setTextDir(textDir) |
| .setSpacingMult(spacingmult) |
| .setSpacingAdd(spacingadd) |
| .setIncludePad(includepad) |
| .setEllipsizedWidth(ellipsizedWidth) |
| .setEllipsize(ellipsize) |
| .setMaxLines(maxLines); |
| /* |
| * This is annoying, but we can't refer to the layout until |
| * superclass construction is finished, and the superclass |
| * constructor wants the reference to the display text. |
| * |
| * This will break if the superclass constructor ever actually |
| * cares about the content instead of just holding the reference. |
| */ |
| if (ellipsize != null) { |
| Ellipsizer e = (Ellipsizer) getText(); |
| |
| e.mLayout = this; |
| e.mWidth = ellipsizedWidth; |
| e.mMethod = ellipsize; |
| mEllipsizedWidth = ellipsizedWidth; |
| |
| mColumns = COLUMNS_ELLIPSIZE; |
| } else { |
| mColumns = COLUMNS_NORMAL; |
| mEllipsizedWidth = outerwidth; |
| } |
| |
| mLineDirections = ArrayUtils.newUnpaddedArray(Directions.class, 2 * mColumns); |
| mLines = new int[mLineDirections.length]; |
| mMaximumVisibleLineCount = maxLines; |
| |
| generate(b, b.mIncludePad, b.mIncludePad); |
| |
| Builder.recycle(b); |
| } |
| |
| /* package */ StaticLayout(CharSequence text) { |
| super(text, null, 0, null, 0, 0); |
| |
| mColumns = COLUMNS_ELLIPSIZE; |
| mLineDirections = ArrayUtils.newUnpaddedArray(Directions.class, 2 * mColumns); |
| mLines = new int[mLineDirections.length]; |
| } |
| |
| private StaticLayout(Builder b) { |
| super((b.mEllipsize == null) |
| ? b.mText |
| : (b.mText instanceof Spanned) |
| ? new SpannedEllipsizer(b.mText) |
| : new Ellipsizer(b.mText), |
| b.mPaint, b.mWidth, b.mAlignment, b.mSpacingMult, b.mSpacingAdd); |
| |
| if (b.mEllipsize != null) { |
| Ellipsizer e = (Ellipsizer) getText(); |
| |
| e.mLayout = this; |
| e.mWidth = b.mEllipsizedWidth; |
| e.mMethod = b.mEllipsize; |
| mEllipsizedWidth = b.mEllipsizedWidth; |
| |
| mColumns = COLUMNS_ELLIPSIZE; |
| } else { |
| mColumns = COLUMNS_NORMAL; |
| mEllipsizedWidth = b.mWidth; |
| } |
| |
| mLineDirections = ArrayUtils.newUnpaddedArray(Directions.class, 2 * mColumns); |
| mLines = new int[mLineDirections.length]; |
| mMaximumVisibleLineCount = b.mMaxLines; |
| |
| generate(b, b.mIncludePad, b.mIncludePad); |
| } |
| |
| /* package */ void generate(Builder b, boolean includepad, boolean trackpad) { |
| CharSequence source = b.mText; |
| int bufStart = b.mStart; |
| int bufEnd = b.mEnd; |
| TextPaint paint = b.mPaint; |
| int outerWidth = b.mWidth; |
| TextDirectionHeuristic textDir = b.mTextDir; |
| float spacingmult = b.mSpacingMult; |
| float spacingadd = b.mSpacingAdd; |
| float ellipsizedWidth = b.mEllipsizedWidth; |
| TextUtils.TruncateAt ellipsize = b.mEllipsize; |
| LineBreaks lineBreaks = new LineBreaks(); // TODO: move to builder to avoid allocation costs |
| // store span end locations |
| int[] spanEndCache = new int[4]; |
| // store fontMetrics per span range |
| // must be a multiple of 4 (and > 0) (store top, bottom, ascent, and descent per range) |
| int[] fmCache = new int[4 * 4]; |
| b.setLocale(paint.getTextLocale()); // TODO: also respect LocaleSpan within the text |
| |
| mLineCount = 0; |
| |
| int v = 0; |
| boolean needMultiply = (spacingmult != 1 || spacingadd != 0); |
| |
| Paint.FontMetricsInt fm = b.mFontMetricsInt; |
| int[] chooseHtv = null; |
| |
| MeasuredText measured = b.mMeasuredText; |
| |
| Spanned spanned = null; |
| if (source instanceof Spanned) |
| spanned = (Spanned) source; |
| |
| int paraEnd; |
| for (int paraStart = bufStart; paraStart <= bufEnd; paraStart = paraEnd) { |
| paraEnd = TextUtils.indexOf(source, CHAR_NEW_LINE, paraStart, bufEnd); |
| if (paraEnd < 0) |
| paraEnd = bufEnd; |
| else |
| paraEnd++; |
| |
| int firstWidthLineCount = 1; |
| int firstWidth = outerWidth; |
| int restWidth = outerWidth; |
| |
| LineHeightSpan[] chooseHt = null; |
| |
| if (spanned != null) { |
| LeadingMarginSpan[] sp = getParagraphSpans(spanned, paraStart, paraEnd, |
| LeadingMarginSpan.class); |
| for (int i = 0; i < sp.length; i++) { |
| LeadingMarginSpan lms = sp[i]; |
| firstWidth -= sp[i].getLeadingMargin(true); |
| restWidth -= sp[i].getLeadingMargin(false); |
| |
| // LeadingMarginSpan2 is odd. The count affects all |
| // leading margin spans, not just this particular one |
| if (lms instanceof LeadingMarginSpan2) { |
| LeadingMarginSpan2 lms2 = (LeadingMarginSpan2) lms; |
| firstWidthLineCount = Math.max(firstWidthLineCount, |
| lms2.getLeadingMarginLineCount()); |
| } |
| } |
| |
| chooseHt = getParagraphSpans(spanned, paraStart, paraEnd, LineHeightSpan.class); |
| |
| if (chooseHt.length != 0) { |
| if (chooseHtv == null || |
| chooseHtv.length < chooseHt.length) { |
| chooseHtv = ArrayUtils.newUnpaddedIntArray(chooseHt.length); |
| } |
| |
| for (int i = 0; i < chooseHt.length; i++) { |
| int o = spanned.getSpanStart(chooseHt[i]); |
| |
| if (o < paraStart) { |
| // starts in this layout, before the |
| // current paragraph |
| |
| chooseHtv[i] = getLineTop(getLineForOffset(o)); |
| } else { |
| // starts in this paragraph |
| |
| chooseHtv[i] = v; |
| } |
| } |
| } |
| } |
| |
| measured.setPara(source, paraStart, paraEnd, textDir, b); |
| char[] chs = measured.mChars; |
| float[] widths = measured.mWidths; |
| byte[] chdirs = measured.mLevels; |
| int dir = measured.mDir; |
| boolean easy = measured.mEasy; |
| |
| // tab stop locations |
| int[] variableTabStops = null; |
| if (spanned != null) { |
| TabStopSpan[] spans = getParagraphSpans(spanned, paraStart, |
| paraEnd, TabStopSpan.class); |
| if (spans.length > 0) { |
| int[] stops = new int[spans.length]; |
| for (int i = 0; i < spans.length; i++) { |
| stops[i] = spans[i].getTabStop(); |
| } |
| Arrays.sort(stops, 0, stops.length); |
| variableTabStops = stops; |
| } |
| } |
| |
| nSetupParagraph(b.mNativePtr, chs, paraEnd - paraStart, |
| firstWidth, firstWidthLineCount, restWidth, |
| variableTabStops, TAB_INCREMENT, b.mBreakStrategy); |
| |
| // measurement has to be done before performing line breaking |
| // but we don't want to recompute fontmetrics or span ranges the |
| // second time, so we cache those and then use those stored values |
| int fmCacheCount = 0; |
| int spanEndCacheCount = 0; |
| for (int spanStart = paraStart, spanEnd; spanStart < paraEnd; spanStart = spanEnd) { |
| if (fmCacheCount * 4 >= fmCache.length) { |
| int[] grow = new int[fmCacheCount * 4 * 2]; |
| System.arraycopy(fmCache, 0, grow, 0, fmCacheCount * 4); |
| fmCache = grow; |
| } |
| |
| if (spanEndCacheCount >= spanEndCache.length) { |
| int[] grow = new int[spanEndCacheCount * 2]; |
| System.arraycopy(spanEndCache, 0, grow, 0, spanEndCacheCount); |
| spanEndCache = grow; |
| } |
| |
| if (spanned == null) { |
| spanEnd = paraEnd; |
| int spanLen = spanEnd - spanStart; |
| measured.addStyleRun(paint, spanLen, fm); |
| } else { |
| spanEnd = spanned.nextSpanTransition(spanStart, paraEnd, |
| MetricAffectingSpan.class); |
| int spanLen = spanEnd - spanStart; |
| MetricAffectingSpan[] spans = |
| spanned.getSpans(spanStart, spanEnd, MetricAffectingSpan.class); |
| spans = TextUtils.removeEmptySpans(spans, spanned, MetricAffectingSpan.class); |
| measured.addStyleRun(paint, spans, spanLen, fm); |
| } |
| |
| // the order of storage here (top, bottom, ascent, descent) has to match the code below |
| // where these values are retrieved |
| fmCache[fmCacheCount * 4 + 0] = fm.top; |
| fmCache[fmCacheCount * 4 + 1] = fm.bottom; |
| fmCache[fmCacheCount * 4 + 2] = fm.ascent; |
| fmCache[fmCacheCount * 4 + 3] = fm.descent; |
| fmCacheCount++; |
| |
| spanEndCache[spanEndCacheCount] = spanEnd; |
| spanEndCacheCount++; |
| } |
| |
| nGetWidths(b.mNativePtr, widths); |
| int breakCount = nComputeLineBreaks(b.mNativePtr, lineBreaks, lineBreaks.breaks, |
| lineBreaks.widths, lineBreaks.flags, lineBreaks.breaks.length); |
| |
| int[] breaks = lineBreaks.breaks; |
| float[] lineWidths = lineBreaks.widths; |
| int[] flags = lineBreaks.flags; |
| |
| // here is the offset of the starting character of the line we are currently measuring |
| int here = paraStart; |
| |
| int fmTop = 0, fmBottom = 0, fmAscent = 0, fmDescent = 0; |
| int fmCacheIndex = 0; |
| int spanEndCacheIndex = 0; |
| int breakIndex = 0; |
| for (int spanStart = paraStart, spanEnd; spanStart < paraEnd; spanStart = spanEnd) { |
| // retrieve end of span |
| spanEnd = spanEndCache[spanEndCacheIndex++]; |
| |
| // retrieve cached metrics, order matches above |
| fm.top = fmCache[fmCacheIndex * 4 + 0]; |
| fm.bottom = fmCache[fmCacheIndex * 4 + 1]; |
| fm.ascent = fmCache[fmCacheIndex * 4 + 2]; |
| fm.descent = fmCache[fmCacheIndex * 4 + 3]; |
| fmCacheIndex++; |
| |
| if (fm.top < fmTop) { |
| fmTop = fm.top; |
| } |
| if (fm.ascent < fmAscent) { |
| fmAscent = fm.ascent; |
| } |
| if (fm.descent > fmDescent) { |
| fmDescent = fm.descent; |
| } |
| if (fm.bottom > fmBottom) { |
| fmBottom = fm.bottom; |
| } |
| |
| // skip breaks ending before current span range |
| while (breakIndex < breakCount && paraStart + breaks[breakIndex] < spanStart) { |
| breakIndex++; |
| } |
| |
| while (breakIndex < breakCount && paraStart + breaks[breakIndex] <= spanEnd) { |
| int endPos = paraStart + breaks[breakIndex]; |
| |
| boolean moreChars = (endPos < bufEnd); |
| |
| v = out(source, here, endPos, |
| fmAscent, fmDescent, fmTop, fmBottom, |
| v, spacingmult, spacingadd, chooseHt,chooseHtv, fm, flags[breakIndex], |
| needMultiply, chdirs, dir, easy, bufEnd, includepad, trackpad, |
| chs, widths, paraStart, ellipsize, ellipsizedWidth, |
| lineWidths[breakIndex], paint, moreChars); |
| |
| if (endPos < spanEnd) { |
| // preserve metrics for current span |
| fmTop = fm.top; |
| fmBottom = fm.bottom; |
| fmAscent = fm.ascent; |
| fmDescent = fm.descent; |
| } else { |
| fmTop = fmBottom = fmAscent = fmDescent = 0; |
| } |
| |
| here = endPos; |
| breakIndex++; |
| |
| if (mLineCount >= mMaximumVisibleLineCount) { |
| return; |
| } |
| } |
| } |
| |
| if (paraEnd == bufEnd) |
| break; |
| } |
| |
| if ((bufEnd == bufStart || source.charAt(bufEnd - 1) == CHAR_NEW_LINE) && |
| mLineCount < mMaximumVisibleLineCount) { |
| // Log.e("text", "output last " + bufEnd); |
| |
| measured.setPara(source, bufEnd, bufEnd, textDir, b); |
| |
| paint.getFontMetricsInt(fm); |
| |
| v = out(source, |
| bufEnd, bufEnd, fm.ascent, fm.descent, |
| fm.top, fm.bottom, |
| v, |
| spacingmult, spacingadd, null, |
| null, fm, 0, |
| needMultiply, measured.mLevels, measured.mDir, measured.mEasy, bufEnd, |
| includepad, trackpad, null, |
| null, bufStart, ellipsize, |
| ellipsizedWidth, 0, paint, false); |
| } |
| } |
| |
| private int out(CharSequence text, int start, int end, |
| int above, int below, int top, int bottom, int v, |
| float spacingmult, float spacingadd, |
| LineHeightSpan[] chooseHt, int[] chooseHtv, |
| Paint.FontMetricsInt fm, int flags, |
| boolean needMultiply, byte[] chdirs, int dir, |
| boolean easy, int bufEnd, boolean includePad, |
| boolean trackPad, char[] chs, |
| float[] widths, int widthStart, TextUtils.TruncateAt ellipsize, |
| float ellipsisWidth, float textWidth, |
| TextPaint paint, boolean moreChars) { |
| int j = mLineCount; |
| int off = j * mColumns; |
| int want = off + mColumns + TOP; |
| int[] lines = mLines; |
| |
| if (want >= lines.length) { |
| Directions[] grow2 = ArrayUtils.newUnpaddedArray( |
| Directions.class, GrowingArrayUtils.growSize(want)); |
| System.arraycopy(mLineDirections, 0, grow2, 0, |
| mLineDirections.length); |
| mLineDirections = grow2; |
| |
| int[] grow = new int[grow2.length]; |
| System.arraycopy(lines, 0, grow, 0, lines.length); |
| mLines = grow; |
| lines = grow; |
| } |
| |
| if (chooseHt != null) { |
| fm.ascent = above; |
| fm.descent = below; |
| fm.top = top; |
| fm.bottom = bottom; |
| |
| for (int i = 0; i < chooseHt.length; i++) { |
| if (chooseHt[i] instanceof LineHeightSpan.WithDensity) { |
| ((LineHeightSpan.WithDensity) chooseHt[i]). |
| chooseHeight(text, start, end, chooseHtv[i], v, fm, paint); |
| |
| } else { |
| chooseHt[i].chooseHeight(text, start, end, chooseHtv[i], v, fm); |
| } |
| } |
| |
| above = fm.ascent; |
| below = fm.descent; |
| top = fm.top; |
| bottom = fm.bottom; |
| } |
| |
| boolean firstLine = (j == 0); |
| boolean currentLineIsTheLastVisibleOne = (j + 1 == mMaximumVisibleLineCount); |
| boolean lastLine = currentLineIsTheLastVisibleOne || (end == bufEnd); |
| |
| if (firstLine) { |
| if (trackPad) { |
| mTopPadding = top - above; |
| } |
| |
| if (includePad) { |
| above = top; |
| } |
| } |
| |
| int extra; |
| |
| if (lastLine) { |
| if (trackPad) { |
| mBottomPadding = bottom - below; |
| } |
| |
| if (includePad) { |
| below = bottom; |
| } |
| } |
| |
| |
| if (needMultiply && !lastLine) { |
| double ex = (below - above) * (spacingmult - 1) + spacingadd; |
| if (ex >= 0) { |
| extra = (int)(ex + EXTRA_ROUNDING); |
| } else { |
| extra = -(int)(-ex + EXTRA_ROUNDING); |
| } |
| } else { |
| extra = 0; |
| } |
| |
| lines[off + START] = start; |
| lines[off + TOP] = v; |
| lines[off + DESCENT] = below + extra; |
| |
| v += (below - above) + extra; |
| lines[off + mColumns + START] = end; |
| lines[off + mColumns + TOP] = v; |
| |
| // TODO: could move TAB to share same column as HYPHEN, simplifying this code and gaining |
| // one bit for start field |
| lines[off + TAB] |= flags & TAB_MASK; |
| lines[off + HYPHEN] = flags; |
| |
| lines[off + DIR] |= dir << DIR_SHIFT; |
| Directions linedirs = DIRS_ALL_LEFT_TO_RIGHT; |
| // easy means all chars < the first RTL, so no emoji, no nothing |
| // XXX a run with no text or all spaces is easy but might be an empty |
| // RTL paragraph. Make sure easy is false if this is the case. |
| if (easy) { |
| mLineDirections[j] = linedirs; |
| } else { |
| mLineDirections[j] = AndroidBidi.directions(dir, chdirs, start - widthStart, chs, |
| start - widthStart, end - start); |
| } |
| |
| if (ellipsize != null) { |
| // If there is only one line, then do any type of ellipsis except when it is MARQUEE |
| // if there are multiple lines, just allow END ellipsis on the last line |
| boolean forceEllipsis = moreChars && (mLineCount + 1 == mMaximumVisibleLineCount); |
| |
| boolean doEllipsis = |
| (((mMaximumVisibleLineCount == 1 && moreChars) || (firstLine && !moreChars)) && |
| ellipsize != TextUtils.TruncateAt.MARQUEE) || |
| (!firstLine && (currentLineIsTheLastVisibleOne || !moreChars) && |
| ellipsize == TextUtils.TruncateAt.END); |
| if (doEllipsis) { |
| calculateEllipsis(start, end, widths, widthStart, |
| ellipsisWidth, ellipsize, j, |
| textWidth, paint, forceEllipsis); |
| } |
| } |
| |
| mLineCount++; |
| return v; |
| } |
| |
| private void calculateEllipsis(int lineStart, int lineEnd, |
| float[] widths, int widthStart, |
| float avail, TextUtils.TruncateAt where, |
| int line, float textWidth, TextPaint paint, |
| boolean forceEllipsis) { |
| if (textWidth <= avail && !forceEllipsis) { |
| // Everything fits! |
| mLines[mColumns * line + ELLIPSIS_START] = 0; |
| mLines[mColumns * line + ELLIPSIS_COUNT] = 0; |
| return; |
| } |
| |
| float ellipsisWidth = paint.measureText( |
| (where == TextUtils.TruncateAt.END_SMALL) ? |
| TextUtils.ELLIPSIS_TWO_DOTS : TextUtils.ELLIPSIS_NORMAL, 0, 1); |
| int ellipsisStart = 0; |
| int ellipsisCount = 0; |
| int len = lineEnd - lineStart; |
| |
| // We only support start ellipsis on a single line |
| if (where == TextUtils.TruncateAt.START) { |
| if (mMaximumVisibleLineCount == 1) { |
| float sum = 0; |
| int i; |
| |
| for (i = len; i > 0; i--) { |
| float w = widths[i - 1 + lineStart - widthStart]; |
| |
| if (w + sum + ellipsisWidth > avail) { |
| break; |
| } |
| |
| sum += w; |
| } |
| |
| ellipsisStart = 0; |
| ellipsisCount = i; |
| } else { |
| if (Log.isLoggable(TAG, Log.WARN)) { |
| Log.w(TAG, "Start Ellipsis only supported with one line"); |
| } |
| } |
| } else if (where == TextUtils.TruncateAt.END || where == TextUtils.TruncateAt.MARQUEE || |
| where == TextUtils.TruncateAt.END_SMALL) { |
| float sum = 0; |
| int i; |
| |
| for (i = 0; i < len; i++) { |
| float w = widths[i + lineStart - widthStart]; |
| |
| if (w + sum + ellipsisWidth > avail) { |
| break; |
| } |
| |
| sum += w; |
| } |
| |
| ellipsisStart = i; |
| ellipsisCount = len - i; |
| if (forceEllipsis && ellipsisCount == 0 && len > 0) { |
| ellipsisStart = len - 1; |
| ellipsisCount = 1; |
| } |
| } else { |
| // where = TextUtils.TruncateAt.MIDDLE We only support middle ellipsis on a single line |
| if (mMaximumVisibleLineCount == 1) { |
| float lsum = 0, rsum = 0; |
| int left = 0, right = len; |
| |
| float ravail = (avail - ellipsisWidth) / 2; |
| for (right = len; right > 0; right--) { |
| float w = widths[right - 1 + lineStart - widthStart]; |
| |
| if (w + rsum > ravail) { |
| break; |
| } |
| |
| rsum += w; |
| } |
| |
| float lavail = avail - ellipsisWidth - rsum; |
| for (left = 0; left < right; left++) { |
| float w = widths[left + lineStart - widthStart]; |
| |
| if (w + lsum > lavail) { |
| break; |
| } |
| |
| lsum += w; |
| } |
| |
| ellipsisStart = left; |
| ellipsisCount = right - left; |
| } else { |
| if (Log.isLoggable(TAG, Log.WARN)) { |
| Log.w(TAG, "Middle Ellipsis only supported with one line"); |
| } |
| } |
| } |
| |
| mLines[mColumns * line + ELLIPSIS_START] = ellipsisStart; |
| mLines[mColumns * line + ELLIPSIS_COUNT] = ellipsisCount; |
| } |
| |
| // Override the base class so we can directly access our members, |
| // rather than relying on member functions. |
| // The logic mirrors that of Layout.getLineForVertical |
| // FIXME: It may be faster to do a linear search for layouts without many lines. |
| @Override |
| public int getLineForVertical(int vertical) { |
| int high = mLineCount; |
| int low = -1; |
| int guess; |
| int[] lines = mLines; |
| while (high - low > 1) { |
| guess = (high + low) >> 1; |
| if (lines[mColumns * guess + TOP] > vertical){ |
| high = guess; |
| } else { |
| low = guess; |
| } |
| } |
| if (low < 0) { |
| return 0; |
| } else { |
| return low; |
| } |
| } |
| |
| @Override |
| public int getLineCount() { |
| return mLineCount; |
| } |
| |
| @Override |
| public int getLineTop(int line) { |
| int top = mLines[mColumns * line + TOP]; |
| if (mMaximumVisibleLineCount > 0 && line >= mMaximumVisibleLineCount && |
| line != mLineCount) { |
| top += getBottomPadding(); |
| } |
| return top; |
| } |
| |
| @Override |
| public int getLineDescent(int line) { |
| int descent = mLines[mColumns * line + DESCENT]; |
| if (mMaximumVisibleLineCount > 0 && line >= mMaximumVisibleLineCount - 1 && // -1 intended |
| line != mLineCount) { |
| descent += getBottomPadding(); |
| } |
| return descent; |
| } |
| |
| @Override |
| public int getLineStart(int line) { |
| return mLines[mColumns * line + START] & START_MASK; |
| } |
| |
| @Override |
| public int getParagraphDirection(int line) { |
| return mLines[mColumns * line + DIR] >> DIR_SHIFT; |
| } |
| |
| @Override |
| public boolean getLineContainsTab(int line) { |
| return (mLines[mColumns * line + TAB] & TAB_MASK) != 0; |
| } |
| |
| @Override |
| public final Directions getLineDirections(int line) { |
| return mLineDirections[line]; |
| } |
| |
| @Override |
| public int getTopPadding() { |
| return mTopPadding; |
| } |
| |
| @Override |
| public int getBottomPadding() { |
| return mBottomPadding; |
| } |
| |
| /** |
| * @hide |
| */ |
| @Override |
| public int getHyphen(int line) { |
| return mLines[mColumns * line + HYPHEN] & 0xff; |
| } |
| |
| @Override |
| public int getEllipsisCount(int line) { |
| if (mColumns < COLUMNS_ELLIPSIZE) { |
| return 0; |
| } |
| |
| return mLines[mColumns * line + ELLIPSIS_COUNT]; |
| } |
| |
| @Override |
| public int getEllipsisStart(int line) { |
| if (mColumns < COLUMNS_ELLIPSIZE) { |
| return 0; |
| } |
| |
| return mLines[mColumns * line + ELLIPSIS_START]; |
| } |
| |
| @Override |
| public int getEllipsizedWidth() { |
| return mEllipsizedWidth; |
| } |
| |
| private static native long nNewBuilder(); |
| private static native void nFreeBuilder(long nativePtr); |
| private static native void nFinishBuilder(long nativePtr); |
| |
| /* package */ static native long nLoadHyphenator(String patternData); |
| |
| private static native void nSetLocale(long nativePtr, String locale, long nativeHyphenator); |
| |
| private static native void nSetIndents(long nativePtr, int[] indents); |
| |
| // Set up paragraph text and settings; done as one big method to minimize jni crossings |
| private static native void nSetupParagraph(long nativePtr, char[] text, int length, |
| float firstWidth, int firstWidthLineCount, float restWidth, |
| int[] variableTabStops, int defaultTabStop, int breakStrategy); |
| |
| private static native float nAddStyleRun(long nativePtr, long nativePaint, |
| long nativeTypeface, int start, int end, boolean isRtl); |
| |
| private static native void nAddMeasuredRun(long nativePtr, |
| int start, int end, float[] widths); |
| |
| private static native void nAddReplacementRun(long nativePtr, int start, int end, float width); |
| |
| private static native void nGetWidths(long nativePtr, float[] widths); |
| |
| // populates LineBreaks and returns the number of breaks found |
| // |
| // the arrays inside the LineBreaks objects are passed in as well |
| // to reduce the number of JNI calls in the common case where the |
| // arrays do not have to be resized |
| private static native int nComputeLineBreaks(long nativePtr, LineBreaks recycle, |
| int[] recycleBreaks, float[] recycleWidths, int[] recycleFlags, int recycleLength); |
| |
| private int mLineCount; |
| private int mTopPadding, mBottomPadding; |
| private int mColumns; |
| private int mEllipsizedWidth; |
| |
| private static final int COLUMNS_NORMAL = 4; |
| private static final int COLUMNS_ELLIPSIZE = 6; |
| private static final int START = 0; |
| private static final int DIR = START; |
| private static final int TAB = START; |
| private static final int TOP = 1; |
| private static final int DESCENT = 2; |
| private static final int HYPHEN = 3; |
| private static final int ELLIPSIS_START = 4; |
| private static final int ELLIPSIS_COUNT = 5; |
| |
| private int[] mLines; |
| private Directions[] mLineDirections; |
| private int mMaximumVisibleLineCount = Integer.MAX_VALUE; |
| |
| private static final int START_MASK = 0x1FFFFFFF; |
| private static final int DIR_SHIFT = 30; |
| private static final int TAB_MASK = 0x20000000; |
| |
| private static final int TAB_INCREMENT = 20; // same as Layout, but that's private |
| |
| private static final char CHAR_NEW_LINE = '\n'; |
| |
| private static final double EXTRA_ROUNDING = 0.5; |
| |
| // This is used to return three arrays from a single JNI call when |
| // performing line breaking |
| /*package*/ static class LineBreaks { |
| private static final int INITIAL_SIZE = 16; |
| public int[] breaks = new int[INITIAL_SIZE]; |
| public float[] widths = new float[INITIAL_SIZE]; |
| public int[] flags = new int[INITIAL_SIZE]; // hasTabOrEmoji |
| // breaks, widths, and flags should all have the same length |
| } |
| |
| } |