| /* |
| * Copyright (C) 2016 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| syntax = "proto2"; |
| |
| package clearcut.connectivity; |
| |
| option java_package = "com.android.server.wifi"; |
| option java_outer_classname = "WifiMetricsProto"; |
| |
| // The information about the Wifi events. |
| message WifiLog { |
| |
| // Session information that gets logged for every Wifi connection. |
| repeated ConnectionEvent connection_event = 1; |
| |
| // Number of saved networks in the user profile. |
| optional int32 num_saved_networks = 2; |
| |
| // Number of open networks in the saved networks. |
| optional int32 num_open_networks = 3; |
| |
| // Number of personal networks. |
| optional int32 num_personal_networks = 4; |
| |
| // Number of enterprise networks. |
| optional int32 num_enterprise_networks = 5; |
| |
| // Does the user have location setting enabled. |
| optional bool is_location_enabled = 6; |
| |
| // Does the user have scanning enabled. |
| optional bool is_scanning_always_enabled = 7; |
| |
| // Number of times user toggled wifi using the settings menu. |
| optional int32 num_wifi_toggled_via_settings = 8; |
| |
| // Number of times user toggled wifi using the airplane menu. |
| optional int32 num_wifi_toggled_via_airplane = 9; |
| |
| // Number of networks added by the user. |
| optional int32 num_networks_added_by_user = 10; |
| |
| // Number of networks added by applications. |
| optional int32 num_networks_added_by_apps = 11; |
| |
| // Number scans that returned empty results. |
| optional int32 num_empty_scan_results = 12; |
| |
| // Number scans that returned at least one result. |
| optional int32 num_non_empty_scan_results = 13; |
| |
| // Number of single scans requests. |
| optional int32 num_oneshot_scans = 14; |
| |
| // Number of repeated background scans that were scheduled to the chip. |
| optional int32 num_background_scans = 15; |
| |
| // Error codes that a scan can result in. |
| enum ScanReturnCode { |
| |
| // Return Code is unknown. |
| SCAN_UNKNOWN = 0; |
| |
| // Scan was successful. |
| SCAN_SUCCESS = 1; |
| |
| // Scan was successfully started, but was interrupted. |
| SCAN_FAILURE_INTERRUPTED = 2; |
| |
| // Scan failed to start because of invalid configuration |
| // (bad channel, etc). |
| SCAN_FAILURE_INVALID_CONFIGURATION = 3; |
| |
| // Could not start a scan because wifi is disabled. |
| FAILURE_WIFI_DISABLED = 4; |
| |
| } |
| |
| // Mapping of error codes to the number of times that scans resulted |
| // in that error. |
| repeated ScanReturnEntry scan_return_entries = 16; |
| |
| message ScanReturnEntry { |
| |
| // Return code of the scan. |
| optional ScanReturnCode scan_return_code = 1; |
| |
| // Number of entries that were found in the scan. |
| optional int32 scan_results_count = 2; |
| } |
| |
| // State of the Wifi. |
| enum WifiState { |
| |
| // State is unknown. |
| WIFI_UNKNOWN = 0; |
| |
| // Wifi is disabled. |
| WIFI_DISABLED = 1; |
| |
| // Wifi is enabled. |
| WIFI_DISCONNECTED = 2; |
| |
| // Wifi is enabled and associated with an AP. |
| WIFI_ASSOCIATED = 3; |
| } |
| |
| // Mapping of system state to the number of times that scans were requested in |
| // that state |
| repeated WifiSystemStateEntry wifi_system_state_entries = 17; |
| |
| message WifiSystemStateEntry { |
| |
| // Current WiFi state. |
| optional WifiState wifi_state = 1; |
| |
| // Count of scans in state. |
| optional int32 wifi_state_count = 2; |
| |
| // Is screen on. |
| optional bool is_screen_on = 3; |
| } |
| |
| // Mapping of Error/Success codes to the number of background scans that resulted in it |
| repeated ScanReturnEntry background_scan_return_entries = 18; |
| |
| // Mapping of system state to the number of times that Background scans were requested in that |
| // state |
| repeated WifiSystemStateEntry background_scan_request_state = 19; |
| |
| // Total number of times the Watchdog of Last Resort triggered, resetting the wifi stack |
| optional int32 num_last_resort_watchdog_triggers = 20; |
| |
| // Total number of networks over bad association threshold when watchdog triggered |
| optional int32 num_last_resort_watchdog_bad_association_networks_total = 21; |
| |
| // Total number of networks over bad authentication threshold when watchdog triggered |
| optional int32 num_last_resort_watchdog_bad_authentication_networks_total = 22; |
| |
| // Total number of networks over bad dhcp threshold when watchdog triggered |
| optional int32 num_last_resort_watchdog_bad_dhcp_networks_total = 23; |
| |
| // Total number of networks over bad other threshold when watchdog triggered |
| optional int32 num_last_resort_watchdog_bad_other_networks_total = 24; |
| |
| // Total count of networks seen when watchdog triggered |
| optional int32 num_last_resort_watchdog_available_networks_total = 25; |
| |
| // Total count of triggers with atleast one bad association network |
| optional int32 num_last_resort_watchdog_triggers_with_bad_association = 26; |
| |
| // Total count of triggers with atleast one bad authentication network |
| optional int32 num_last_resort_watchdog_triggers_with_bad_authentication = 27; |
| |
| // Total count of triggers with atleast one bad dhcp network |
| optional int32 num_last_resort_watchdog_triggers_with_bad_dhcp = 28; |
| |
| // Total count of triggers with atleast one bad other network |
| optional int32 num_last_resort_watchdog_triggers_with_bad_other = 29; |
| |
| // Count of times connectivity watchdog confirmed pno is working |
| optional int32 num_connectivity_watchdog_pno_good = 30; |
| |
| // Count of times connectivity watchdog found pno not working |
| optional int32 num_connectivity_watchdog_pno_bad = 31; |
| |
| // Count of times connectivity watchdog confirmed background scan is working |
| optional int32 num_connectivity_watchdog_background_good = 32; |
| |
| // Count of times connectivity watchdog found background scan not working |
| optional int32 num_connectivity_watchdog_background_bad = 33; |
| |
| // The time duration represented by this wifi log, from start to end of capture |
| optional int32 record_duration_sec = 34; |
| |
| // Counts the occurrences of each individual RSSI poll level |
| repeated RssiPollCount rssi_poll_rssi_count = 35; |
| |
| // Total number of times WiFi connected immediately after a Last Resort Watchdog trigger, |
| // without new networks becoming available. |
| optional int32 num_last_resort_watchdog_successes = 36; |
| |
| // Total number of saved hidden networks |
| optional int32 num_hidden_networks = 37; |
| |
| // Total number of saved passpoint / hotspot 2.0 networks |
| optional int32 num_passpoint_networks = 38; |
| |
| // Total number of scan results |
| optional int32 num_total_scan_results = 39; |
| |
| // Total number of scan results for open networks |
| optional int32 num_open_network_scan_results = 40; |
| |
| // Total number of scan results for personal networks |
| optional int32 num_personal_network_scan_results = 41; |
| |
| // Total number of scan results for enterprise networks |
| optional int32 num_enterprise_network_scan_results = 42; |
| |
| // Total number of scan results for hidden networks |
| optional int32 num_hidden_network_scan_results = 43; |
| |
| // Total number of scan results for hotspot 2.0 r1 networks |
| optional int32 num_hotspot2_r1_network_scan_results = 44; |
| |
| // Total number of scan results for hotspot 2.0 r2 networks |
| optional int32 num_hotspot2_r2_network_scan_results = 45; |
| |
| // Total number of scans handled by framework (oneshot or otherwise) |
| optional int32 num_scans = 46; |
| |
| // Counts the occurrences of each alert reason. |
| repeated AlertReasonCount alert_reason_count = 47; |
| |
| // Counts the occurrences of each Wifi score |
| repeated WifiScoreCount wifi_score_count = 48; |
| |
| // Histogram of Soft AP Durations |
| repeated SoftApDurationBucket soft_ap_duration = 49; |
| |
| // Histogram of Soft AP ReturnCode |
| repeated SoftApReturnCodeCount soft_ap_return_code = 50; |
| |
| // Histogram of the delta between scan result RSSI and RSSI polls |
| repeated RssiPollCount rssi_poll_delta_count = 51; |
| |
| // List of events |
| repeated StaEvent sta_event_list = 52; |
| |
| // Total number of times WiFi HAL crashed. |
| optional int32 num_hal_crashes = 53; |
| |
| // Total number of times WiFicond crashed. |
| optional int32 num_wificond_crashes = 54; |
| |
| // Indicates the number of times an error was encountered in |
| // Wifi HAL on |WifiNative.setupInterfaceForClientMode|. |
| optional int32 num_setup_client_interface_failure_due_to_hal = 55; |
| |
| // Indicates the number of times an error was encountered in |
| // Wificond on |WifiNative.setupInterfaceForClientMode|. |
| optional int32 num_setup_client_interface_failure_due_to_wificond = 56; |
| |
| // Wi-Fi Aware metrics |
| optional WifiAwareLog wifi_aware_log = 57; |
| |
| // Number of saved Passpoint providers in user profile. |
| optional int32 num_passpoint_providers = 58; |
| |
| // Count of times Passpoint provider being installed. |
| optional int32 num_passpoint_provider_installation = 59; |
| |
| // Count of times Passpoint provivider is installed successfully. |
| optional int32 num_passpoint_provider_install_success = 60; |
| |
| // Count of times Passpoint provider is being uninstalled. |
| optional int32 num_passpoint_provider_uninstallation = 61; |
| |
| // Count of times Passpoint provider is uninstalled successfully. |
| optional int32 num_passpoint_provider_uninstall_success = 62; |
| |
| // Count of saved Passpoint providers device has ever connected to. |
| optional int32 num_passpoint_providers_successfully_connected = 63; |
| |
| // Histogram counting instances of scans with N many ScanResults with unique ssids |
| repeated NumConnectableNetworksBucket total_ssids_in_scan_histogram = 64; |
| |
| // Histogram counting instances of scans with N many ScanResults/bssids |
| repeated NumConnectableNetworksBucket total_bssids_in_scan_histogram = 65; |
| |
| // Histogram counting instances of scans with N many unique open ssids |
| repeated NumConnectableNetworksBucket available_open_ssids_in_scan_histogram = 66; |
| |
| // Histogram counting instances of scans with N many bssids for open networks |
| repeated NumConnectableNetworksBucket available_open_bssids_in_scan_histogram = 67; |
| |
| // Histogram counting instances of scans with N many unique ssids for saved networks |
| repeated NumConnectableNetworksBucket available_saved_ssids_in_scan_histogram = 68; |
| |
| // Histogram counting instances of scans with N many bssids for saved networks |
| repeated NumConnectableNetworksBucket available_saved_bssids_in_scan_histogram = 69; |
| |
| // Histogram counting instances of scans with N many unique SSIDs for open or saved networks |
| repeated NumConnectableNetworksBucket available_open_or_saved_ssids_in_scan_histogram = 70; |
| |
| // Histogram counting instances of scans with N many BSSIDs for open or saved networks |
| repeated NumConnectableNetworksBucket available_open_or_saved_bssids_in_scan_histogram = 71; |
| |
| // Histogram counting instances of scans with N many ScanResults matching unique saved passpoint providers |
| repeated NumConnectableNetworksBucket available_saved_passpoint_provider_profiles_in_scan_histogram = 72; |
| |
| // Histogram counting instances of scans with N many ScanResults BSSIDs matching a saved passpoint provider |
| repeated NumConnectableNetworksBucket available_saved_passpoint_provider_bssids_in_scan_histogram = 73; |
| |
| // Counts the number of AllSingleScanLister.onResult calls with a full band scan result |
| optional int32 full_band_all_single_scan_listener_results = 74; |
| |
| // Counts the number of AllSingleScanLister.onResult calls with a partial (channels) scan result |
| optional int32 partial_all_single_scan_listener_results = 75; |
| |
| // Pno scan metrics |
| optional PnoScanMetrics pno_scan_metrics = 76; |
| |
| // Histogram of "Connect to Network" notifications. |
| // The notification Action should be unset. |
| repeated ConnectToNetworkNotificationAndActionCount connect_to_network_notification_count = 77; |
| |
| // Histogram of "Connect to Network" notification user actions. |
| repeated ConnectToNetworkNotificationAndActionCount connect_to_network_notification_action_count = 78; |
| |
| // The number of SSIDs blacklisted from recommendation by the open network |
| // notification recommender |
| optional int32 open_network_recommender_blacklist_size = 79; |
| |
| // Is the available network notification feature turned on |
| optional bool is_wifi_networks_available_notification_on = 80; |
| |
| // Count of recommendation updates made by the open network notification |
| // recommender |
| optional int32 num_open_network_recommendation_updates = 81; |
| |
| // Count of connection attempts that were initiated unsuccessfully |
| optional int32 num_open_network_connect_message_failed_to_send = 82; |
| |
| // Histogram counting instances of scans with N many HotSpot 2.0 R1 APs |
| repeated NumConnectableNetworksBucket observed_hotspot_r1_aps_in_scan_histogram = 83; |
| |
| // Histogram counting instances of scans with N many HotSpot 2.0 R2 APs |
| repeated NumConnectableNetworksBucket observed_hotspot_r2_aps_in_scan_histogram = 84; |
| |
| // Histogram counting instances of scans with N many unique HotSpot 2.0 R1 ESS. |
| // Where ESS is defined as the (HESSID, ANQP Domain ID), (SSID, ANQP Domain ID) or |
| // (SSID, BSSID) tuple depending on AP configuration (in the above priority |
| // order). |
| repeated NumConnectableNetworksBucket observed_hotspot_r1_ess_in_scan_histogram = 85; |
| |
| // Histogram counting instances of scans with N many unique HotSpot 2.0 R2 ESS. |
| // Where ESS is defined as the (HESSID, ANQP Domain ID), (SSID, ANQP Domain ID) or |
| // (SSID, BSSID) tuple depending on AP configuration (in the above priority |
| // order). |
| repeated NumConnectableNetworksBucket observed_hotspot_r2_ess_in_scan_histogram = 86; |
| |
| // Histogram counting number of HotSpot 2.0 R1 APs per observed ESS in a scan |
| // (one value added per unique ESS - potentially multiple counts per single |
| // scan!) |
| repeated NumConnectableNetworksBucket observed_hotspot_r1_aps_per_ess_in_scan_histogram = 87; |
| |
| // Histogram counting number of HotSpot 2.0 R2 APs per observed ESS in a scan |
| // (one value added per unique ESS - potentially multiple counts per single |
| // scan!) |
| repeated NumConnectableNetworksBucket observed_hotspot_r2_aps_per_ess_in_scan_histogram = 88; |
| |
| // SoftAP event list tracking sessions and client counts in tethered mode |
| repeated SoftApConnectedClientsEvent soft_ap_connected_clients_events_tethered = 89; |
| |
| // SoftAP event list tracking sessions and client counts in local only mode |
| repeated SoftApConnectedClientsEvent soft_ap_connected_clients_events_local_only = 90; |
| |
| // Wps connection metrics |
| optional WpsMetrics wps_metrics = 91; |
| |
| // Wifi power statistics |
| optional WifiPowerStats wifi_power_stats = 92; |
| |
| // Number of connectivity single scan requests. |
| optional int32 num_connectivity_oneshot_scans = 93; |
| |
| // WifiWake statistics |
| optional WifiWakeStats wifi_wake_stats = 94; |
| |
| // Histogram counting instances of scans with N many 802.11mc (RTT) supporting APs |
| repeated NumConnectableNetworksBucket observed_80211mc_supporting_aps_in_scan_histogram = 95; |
| |
| // Total number of times supplicant crashed. |
| optional int32 num_supplicant_crashes = 96; |
| |
| // Total number of times hostapd crashed. |
| optional int32 num_hostapd_crashes = 97; |
| |
| // Indicates the number of times an error was encountered in |
| // supplicant on |WifiNative.setupInterfaceForClientMode|. |
| optional int32 num_setup_client_interface_failure_due_to_supplicant = 98; |
| |
| // Indicates the number of times an error was encountered in |
| // Wifi HAL on |WifiNative.setupInterfaceForSoftApMode|. |
| optional int32 num_setup_soft_ap_interface_failure_due_to_hal = 99; |
| |
| // Indicates the number of times an error was encountered in |
| // Wifi HAL on |WifiNative.setupInterfaceForSoftApMode|. |
| optional int32 num_setup_soft_ap_interface_failure_due_to_wificond = 100; |
| |
| // Indicates the number of times an error was encountered in |
| // Wifi HAL on |WifiNative.setupInterfaceForSoftApMode|. |
| optional int32 num_setup_soft_ap_interface_failure_due_to_hostapd = 101; |
| |
| // Indicates the number of times we got an interface down in client mode. |
| optional int32 num_client_interface_down = 102; |
| |
| // Indicates the number of times we got an interface down in softap mode. |
| optional int32 num_soft_ap_interface_down = 103; |
| |
| // Indicates the number of scan requests from external apps. |
| optional int32 num_external_app_oneshot_scan_requests = 104; |
| |
| // Indicates the number of times a scan request from an external foreground app was throttled. |
| optional int32 num_external_foreground_app_oneshot_scan_requests_throttled = 105; |
| |
| // Indicates the number of times a scan request from an external background app was throttled. |
| optional int32 num_external_background_app_oneshot_scan_requests_throttled = 106; |
| |
| // WifiLastResortWatchdog time milliseconds delta between trigger and first connection success |
| optional int64 watchdog_trigger_to_connection_success_duration_ms = 107 [default = -1]; |
| |
| // The number of times wifi experienced failures after watchdog has already been triggered and is |
| // waiting for a connection success |
| optional int64 watchdog_total_connection_failure_count_after_trigger = 108; |
| |
| // Number of times DFS channel scans are requested in single scan requests. |
| optional int32 num_oneshot_has_dfs_channel_scans = 109; |
| |
| // Wi-Fi RTT metrics |
| optional WifiRttLog wifi_rtt_log = 110; |
| |
| // Flag which indicates if Connected MAC Randomization is enabled |
| optional bool is_mac_randomization_on = 111 [default = false]; |
| |
| // Number of radio mode changes to MCC (Multi channel concurrency). |
| optional int32 num_radio_mode_change_to_mcc = 112; |
| |
| // Number of radio mode changes to SCC (Single channel concurrency). |
| optional int32 num_radio_mode_change_to_scc = 113; |
| |
| // Number of radio mode changes to SBS (Single band simultaneous). |
| optional int32 num_radio_mode_change_to_sbs = 114; |
| |
| // Number of radio mode changes to DBS (Dual band simultaneous). |
| optional int32 num_radio_mode_change_to_dbs = 115; |
| |
| // Number of times the firmware picked a SoftAp channel not satisfying user band preference. |
| optional int32 num_soft_ap_user_band_preference_unsatisfied = 116; |
| |
| // Identifier for experimental scoring parameter settings. |
| optional string score_experiment_id = 117; |
| |
| // Data on wifi radio usage |
| optional WifiRadioUsage wifi_radio_usage = 118; |
| |
| // Stores settings values used for metrics testing. |
| optional ExperimentValues experiment_values = 119; |
| |
| // List of WifiIsUnusableEvents which get logged when we notice that WiFi is unusable. |
| // Collected only when WIFI_IS_UNUSABLE_EVENT_METRICS_ENABLED Settings is enabled. |
| repeated WifiIsUnusableEvent wifi_is_unusable_event_list = 120; |
| |
| // Counts the occurrences of each link speed (Mbps) level |
| // with rssi (dBm) and rssi^2 sums (dBm^2) |
| repeated LinkSpeedCount link_speed_counts = 121; |
| |
| // Number of times the SarManager failed to register SAR sensor listener |
| optional int32 num_sar_sensor_registration_failures = 122; |
| |
| // Histogram of the EAP method type of all installed Passpoint profiles |
| repeated PasspointProfileTypeCount installed_passpoint_profile_type = 123; |
| |
| // Hardware revision (EVT, DVT, PVT etc.) |
| optional string hardware_revision = 124; |
| |
| // Total wifi link layer usage data over the logging duration in ms. |
| optional WifiLinkLayerUsageStats wifi_link_layer_usage_stats = 125; |
| |
| // Multiple lists of timestamped link layer stats with labels to represent whether wifi is usable |
| repeated WifiUsabilityStats wifi_usability_stats_list = 126; |
| |
| // Counts the occurrences of each Wifi usability score provided by external app |
| repeated WifiUsabilityScoreCount wifi_usability_score_count = 127; |
| |
| // List of PNO scan stats, one element for each mobility state |
| repeated DeviceMobilityStatePnoScanStats mobility_state_pno_stats_list = 128; |
| } |
| |
| // Information that gets logged for every WiFi connection. |
| message RouterFingerPrint { |
| |
| enum RoamType { |
| |
| // Type is unknown. |
| ROAM_TYPE_UNKNOWN = 0; |
| |
| // No roaming - usually happens on a single band (2.4 GHz) router. |
| ROAM_TYPE_NONE = 1; |
| |
| // Enterprise router. |
| ROAM_TYPE_ENTERPRISE = 2; |
| |
| // DBDC => Dual Band Dual Concurrent essentially a router that |
| // supports both 2.4 GHz and 5 GHz bands. |
| ROAM_TYPE_DBDC = 3; |
| } |
| |
| enum Auth { |
| |
| // Auth is unknown. |
| AUTH_UNKNOWN = 0; |
| |
| // No authentication. |
| AUTH_OPEN = 1; |
| |
| // If the router uses a personal authentication. |
| AUTH_PERSONAL = 2; |
| |
| // If the router is setup for enterprise authentication. |
| AUTH_ENTERPRISE = 3; |
| } |
| |
| enum RouterTechnology { |
| |
| // Router is unknown. |
| ROUTER_TECH_UNKNOWN = 0; |
| |
| // Router Channel A. |
| ROUTER_TECH_A = 1; |
| |
| // Router Channel B. |
| ROUTER_TECH_B = 2; |
| |
| // Router Channel G. |
| ROUTER_TECH_G = 3; |
| |
| // Router Channel N. |
| ROUTER_TECH_N = 4; |
| |
| // Router Channel AC. |
| ROUTER_TECH_AC = 5; |
| |
| // When the channel is not one of the above. |
| ROUTER_TECH_OTHER = 6; |
| } |
| |
| optional RoamType roam_type = 1; |
| |
| // Channel on which the connection takes place. |
| optional int32 channel_info = 2; |
| |
| // DTIM setting of the router. |
| optional int32 dtim = 3; |
| |
| // Authentication scheme of the router. |
| optional Auth authentication = 4; |
| |
| // If the router is hidden. |
| optional bool hidden = 5; |
| |
| // Channel information. |
| optional RouterTechnology router_technology = 6; |
| |
| // whether ipv6 is supported. |
| optional bool supports_ipv6 = 7; |
| |
| // If the router is a passpoint / hotspot 2.0 network |
| optional bool passpoint = 8; |
| } |
| |
| message ConnectionEvent { |
| |
| // Roam Type. |
| enum RoamType { |
| |
| // Type is unknown. |
| ROAM_UNKNOWN = 0; |
| |
| // No roaming. |
| ROAM_NONE = 1; |
| |
| // DBDC roaming. |
| ROAM_DBDC = 2; |
| |
| // Enterprise roaming. |
| ROAM_ENTERPRISE = 3; |
| |
| // User selected roaming. |
| ROAM_USER_SELECTED = 4; |
| |
| // Unrelated. |
| ROAM_UNRELATED = 5; |
| } |
| |
| // Connectivity Level Failure. |
| enum ConnectivityLevelFailure { |
| |
| // Failure is unknown. |
| HLF_UNKNOWN = 0; |
| |
| // No failure. |
| HLF_NONE = 1; |
| |
| // DHCP failure. |
| HLF_DHCP = 2; |
| |
| // No internet connection. |
| HLF_NO_INTERNET = 3; |
| |
| // No internet connection. |
| HLF_UNWANTED = 4; |
| } |
| |
| // Start time of the connection. |
| optional int64 start_time_millis = 1;// [(datapol.semantic_type) = ST_TIMESTAMP]; |
| |
| // Duration to connect. |
| optional int32 duration_taken_to_connect_millis = 2; |
| |
| // Router information. |
| optional RouterFingerPrint router_fingerprint = 3; |
| |
| // RSSI at the start of the connection. |
| optional int32 signal_strength = 4; |
| |
| // Roam Type. |
| optional RoamType roam_type = 5; |
| |
| // Result of the connection. |
| optional int32 connection_result = 6; |
| |
| // Reasons for level 2 failure (needs to be coordinated with wpa-supplicant). |
| optional int32 level_2_failure_code = 7; |
| |
| // Failures that happen at the connectivity layer. |
| optional ConnectivityLevelFailure connectivity_level_failure_code = 8; |
| |
| // Has bug report been taken. |
| optional bool automatic_bug_report_taken = 9; |
| } |
| |
| // Number of occurrences of a specific RSSI poll rssi value |
| message RssiPollCount { |
| // RSSI |
| optional int32 rssi = 1; |
| |
| // Number of RSSI polls with 'rssi' |
| optional int32 count = 2; |
| |
| // Beacon frequency of the channel in MHz |
| optional int32 frequency = 3; |
| } |
| |
| // Number of occurrences of a specific alert reason value |
| message AlertReasonCount { |
| // Alert reason |
| optional int32 reason = 1; |
| |
| // Number of alerts with |reason|. |
| optional int32 count = 2; |
| } |
| |
| // Counts the number of instances of a specific Wifi Score calculated by WifiScoreReport |
| message WifiScoreCount { |
| // Wifi Score |
| optional int32 score = 1; |
| |
| // Number of Wifi score reports with this score |
| optional int32 count = 2; |
| } |
| |
| // Counts the number of instances of a specific Wifi Usability Score |
| message WifiUsabilityScoreCount { |
| // Wifi Usability Score |
| optional int32 score = 1; |
| |
| // Number of Wifi score reports with this score |
| optional int32 count = 2; |
| } |
| |
| // Number of occurrences of a specific link speed (Mbps) |
| // and sum of rssi (dBm) and rssi^2 (dBm^2) |
| message LinkSpeedCount { |
| // Link speed (Mbps) |
| optional int32 link_speed_mbps = 1; |
| |
| // Number of RSSI polls with link_speed |
| optional int32 count = 2; |
| |
| // Sum of absolute values of rssi values (dBm) |
| optional int32 rssi_sum_dbm = 3; |
| |
| // Sum of squares of rssi values (dBm^2) |
| optional int64 rssi_sum_of_squares_dbm_sq = 4; |
| } |
| |
| // Number of occurrences of Soft AP session durations |
| message SoftApDurationBucket { |
| // Bucket covers duration : [duration_sec, duration_sec + bucket_size_sec) |
| // The (inclusive) lower bound of Soft AP session duration represented by this bucket |
| optional int32 duration_sec = 1; |
| |
| // The size of this bucket |
| optional int32 bucket_size_sec = 2; |
| |
| // Number of soft AP session durations that fit into this bucket |
| optional int32 count = 3; |
| } |
| |
| // Number of occurrences of a soft AP session return code |
| message SoftApReturnCodeCount { |
| |
| enum SoftApStartResult { |
| |
| // SoftApManager return code unknown |
| SOFT_AP_RETURN_CODE_UNKNOWN = 0; |
| |
| // SoftAp started successfully |
| SOFT_AP_STARTED_SUCCESSFULLY = 1; |
| |
| // Catch all for failures with no specific failure reason |
| SOFT_AP_FAILED_GENERAL_ERROR = 2; |
| |
| // SoftAp failed to start due to NO_CHANNEL error |
| SOFT_AP_FAILED_NO_CHANNEL = 3; |
| } |
| |
| // Historical, no longer used for writing as of 01/2017. |
| optional int32 return_code = 1 [deprecated = true]; |
| |
| // Occurrences of this soft AP return code |
| optional int32 count = 2; |
| |
| // Result of attempt to start SoftAp |
| optional SoftApStartResult start_result = 3; |
| } |
| |
| message StaEvent { |
| message ConfigInfo { |
| // The set of key management protocols supported by this configuration. |
| optional uint32 allowed_key_management = 1 [default = 0]; |
| |
| // The set of security protocols supported by this configuration. |
| optional uint32 allowed_protocols = 2 [default = 0]; |
| |
| // The set of authentication protocols supported by this configuration. |
| optional uint32 allowed_auth_algorithms = 3 [default = 0]; |
| |
| // The set of pairwise ciphers for WPA supported by this configuration. |
| optional uint32 allowed_pairwise_ciphers = 4 [default = 0]; |
| |
| // The set of group ciphers supported by this configuration. |
| optional uint32 allowed_group_ciphers = 5; |
| |
| // Is this a 'hidden network' |
| optional bool hidden_ssid = 6; |
| |
| // Is this a Hotspot 2.0 / passpoint network |
| optional bool is_passpoint = 7; |
| |
| // Is this an 'ephemeral' network (Not in saved network list, recommended externally) |
| optional bool is_ephemeral = 8; |
| |
| // Has a successful connection ever been established using this WifiConfiguration |
| optional bool has_ever_connected = 9; |
| |
| // RSSI of the scan result candidate associated with this WifiConfiguration |
| optional int32 scan_rssi = 10 [default = -127]; |
| |
| // Frequency of the scan result candidate associated with this WifiConfiguration |
| optional int32 scan_freq = 11 [default = -1]; |
| } |
| |
| enum EventType { |
| // Default/Invalid event |
| TYPE_UNKNOWN = 0; |
| |
| // Supplicant Association Rejection event. Code contains the 802.11 |
| TYPE_ASSOCIATION_REJECTION_EVENT = 1; |
| |
| // Supplicant L2 event, |
| TYPE_AUTHENTICATION_FAILURE_EVENT = 2; |
| |
| // Supplicant L2 event |
| TYPE_NETWORK_CONNECTION_EVENT = 3; |
| |
| // Supplicant L2 event |
| TYPE_NETWORK_DISCONNECTION_EVENT = 4; |
| |
| // Supplicant L2 event |
| TYPE_SUPPLICANT_STATE_CHANGE_EVENT = 5; |
| |
| // Supplicant L2 event |
| TYPE_CMD_ASSOCIATED_BSSID = 6; |
| |
| // IP Manager successfully completed IP Provisioning |
| TYPE_CMD_IP_CONFIGURATION_SUCCESSFUL = 7; |
| |
| // IP Manager failed to complete IP Provisioning |
| TYPE_CMD_IP_CONFIGURATION_LOST = 8; |
| |
| // IP Manager lost reachability to network neighbors |
| TYPE_CMD_IP_REACHABILITY_LOST = 9; |
| |
| // Indicator that Supplicant is targeting a BSSID for roam/connection |
| TYPE_CMD_TARGET_BSSID = 10; |
| |
| // Wifi framework is initiating a connection attempt |
| TYPE_CMD_START_CONNECT = 11; |
| |
| // Wifi framework is initiating a roaming connection attempt |
| TYPE_CMD_START_ROAM = 12; |
| |
| // SystemAPI connect() command, Settings App |
| TYPE_CONNECT_NETWORK = 13; |
| |
| // Network Agent has validated the internet connection (Captive Portal Check success, or user |
| // validation) |
| TYPE_NETWORK_AGENT_VALID_NETWORK = 14; |
| |
| // Framework initiated disconnect. Sometimes generated to give an extra reason for a disconnect |
| // Should typically be followed by a NETWORK_DISCONNECTION_EVENT with a local_gen = true |
| TYPE_FRAMEWORK_DISCONNECT = 15; |
| |
| // The NetworkAgent score for wifi has changed in a way that may impact |
| // connectivity |
| TYPE_SCORE_BREACH = 16; |
| |
| // Framework changed Sta interface MAC address |
| TYPE_MAC_CHANGE = 17; |
| |
| // Wifi is turned on |
| TYPE_WIFI_ENABLED = 18; |
| |
| // Wifi is turned off |
| TYPE_WIFI_DISABLED = 19; |
| |
| // The NetworkAgent Wifi usability score has changed in a way that may |
| // impact connectivity |
| TYPE_WIFI_USABILITY_SCORE_BREACH = 20; |
| } |
| |
| enum FrameworkDisconnectReason { |
| // default/none/unknown value |
| DISCONNECT_UNKNOWN = 0; |
| |
| // API DISCONNECT |
| DISCONNECT_API = 1; |
| |
| // Some framework internal reason (generic) |
| DISCONNECT_GENERIC = 2; |
| |
| // Network Agent network validation failed, user signaled network unwanted |
| DISCONNECT_UNWANTED = 3; |
| |
| // Roaming timed out |
| DISCONNECT_ROAM_WATCHDOG_TIMER = 4; |
| |
| // P2P service requested wifi disconnect |
| DISCONNECT_P2P_DISCONNECT_WIFI_REQUEST = 5; |
| |
| // SIM was removed while using a SIM config |
| DISCONNECT_RESET_SIM_NETWORKS = 6; |
| } |
| |
| // Authentication Failure reasons as reported through the API. |
| enum AuthFailureReason { |
| // Unknown default |
| AUTH_FAILURE_UNKNOWN = 0; |
| |
| // The reason code if there is no error during authentication. It could also imply that there no |
| // authentication in progress, |
| AUTH_FAILURE_NONE = 1; |
| |
| // The reason code if there was a timeout authenticating. |
| AUTH_FAILURE_TIMEOUT = 2; |
| |
| // The reason code if there was a wrong password while authenticating. |
| AUTH_FAILURE_WRONG_PSWD = 3; |
| |
| // The reason code if there was EAP failure while authenticating. |
| AUTH_FAILURE_EAP_FAILURE = 4; |
| } |
| |
| // What event was this |
| optional EventType type = 1; |
| |
| // 80211 death reason code, relevant to NETWORK_DISCONNECTION_EVENTs |
| optional int32 reason = 2 [default = -1]; |
| |
| // 80211 Association Status code, relevant to ASSOCIATION_REJECTION_EVENTs |
| optional int32 status = 3 [default = -1]; |
| |
| // Designates whether a NETWORK_DISCONNECT_EVENT was by the STA or AP |
| optional bool local_gen = 4 [default = false]; |
| |
| // Network information from the WifiConfiguration of a framework initiated connection attempt |
| optional ConfigInfo config_info = 5; |
| |
| // RSSI from the last rssi poll (Only valid for active connections) |
| optional int32 last_rssi = 6 [default = -127]; |
| |
| // Link speed from the last rssi poll (Only valid for active connections) |
| optional int32 last_link_speed = 7 [default = -1]; |
| |
| // Frequency from the last rssi poll (Only valid for active connections) |
| optional int32 last_freq = 8 [default = -1]; |
| |
| // Enum used to define bit positions in the supplicant_state_change_bitmask |
| // See {@code frameworks/base/wifi/java/android/net/wifi/SupplicantState.java} for documentation |
| enum SupplicantState { |
| STATE_DISCONNECTED = 0; |
| |
| STATE_INTERFACE_DISABLED = 1; |
| |
| STATE_INACTIVE = 2; |
| |
| STATE_SCANNING = 3; |
| |
| STATE_AUTHENTICATING = 4; |
| |
| STATE_ASSOCIATING = 5; |
| |
| STATE_ASSOCIATED = 6; |
| |
| STATE_FOUR_WAY_HANDSHAKE = 7; |
| |
| STATE_GROUP_HANDSHAKE = 8; |
| |
| STATE_COMPLETED = 9; |
| |
| STATE_DORMANT = 10; |
| |
| STATE_UNINITIALIZED = 11; |
| |
| STATE_INVALID = 12; |
| } |
| |
| // Bit mask of all supplicant state changes that occurred since the last event |
| optional uint32 supplicant_state_changes_bitmask = 9 [default = 0]; |
| |
| // The number of milliseconds that have elapsed since the device booted |
| optional int64 start_time_millis = 10 [default = 0]; |
| |
| optional FrameworkDisconnectReason framework_disconnect_reason = 11 [default = DISCONNECT_UNKNOWN]; |
| |
| // Flag which indicates if an association rejection event occurred due to a timeout |
| optional bool association_timed_out = 12 [default = false]; |
| |
| // Authentication failure reason, as reported by WifiManager (calculated from state & deauth code) |
| optional AuthFailureReason auth_failure_reason = 13 [default = AUTH_FAILURE_UNKNOWN]; |
| |
| // NetworkAgent score of connected wifi |
| optional int32 last_score = 14 [default = -1]; |
| |
| // NetworkAgent Wifi usability score of connected wifi |
| optional int32 last_wifi_usability_score = 15 [default = -1]; |
| } |
| |
| // Wi-Fi Aware metrics |
| message WifiAwareLog { |
| // total number of unique apps that used Aware (measured on attach) |
| optional int32 num_apps = 1; |
| |
| // total number of unique apps that used an identity callback when attaching |
| optional int32 num_apps_using_identity_callback = 2; |
| |
| // maximum number of attaches for an app |
| optional int32 max_concurrent_attach_sessions_in_app = 3; |
| |
| // histogram of attach request results |
| repeated NanStatusHistogramBucket histogram_attach_session_status = 4; |
| |
| // maximum number of concurrent publish sessions in a single app |
| optional int32 max_concurrent_publish_in_app = 5; |
| |
| // maximum number of concurrent subscribe sessions in a single app |
| optional int32 max_concurrent_subscribe_in_app = 6; |
| |
| // maximum number of concurrent discovery (publish+subscribe) sessions in a single app |
| optional int32 max_concurrent_discovery_sessions_in_app = 7; |
| |
| // maximum number of concurrent publish sessions in the system |
| optional int32 max_concurrent_publish_in_system = 8; |
| |
| // maximum number of concurrent subscribe sessions in the system |
| optional int32 max_concurrent_subscribe_in_system = 9; |
| |
| // maximum number of concurrent discovery (publish+subscribe) sessions in the system |
| optional int32 max_concurrent_discovery_sessions_in_system = 10; |
| |
| // histogram of publish request results |
| repeated NanStatusHistogramBucket histogram_publish_status = 11; |
| |
| // histogram of subscribe request results |
| repeated NanStatusHistogramBucket histogram_subscribe_status = 12; |
| |
| // number of unique apps which experienced a discovery session creation failure due to lack of |
| // resources |
| optional int32 num_apps_with_discovery_session_failure_out_of_resources = 13; |
| |
| // histogram of create ndp request results |
| repeated NanStatusHistogramBucket histogram_request_ndp_status = 14; |
| |
| // histogram of create ndp out-of-band (OOB) request results |
| repeated NanStatusHistogramBucket histogram_request_ndp_oob_status = 15; |
| |
| // maximum number of concurrent active data-interfaces (NDI) in a single app |
| optional int32 max_concurrent_ndi_in_app = 19; |
| |
| // maximum number of concurrent active data-interfaces (NDI) in the system |
| optional int32 max_concurrent_ndi_in_system = 20; |
| |
| // maximum number of concurrent data-paths (NDP) in a single app |
| optional int32 max_concurrent_ndp_in_app = 21; |
| |
| // maximum number of concurrent data-paths (NDP) in the system |
| optional int32 max_concurrent_ndp_in_system = 22; |
| |
| // maximum number of concurrent secure data-paths (NDP) in a single app |
| optional int32 max_concurrent_secure_ndp_in_app = 23; |
| |
| // maximum number of concurrent secure data-paths (NDP) in the system |
| optional int32 max_concurrent_secure_ndp_in_system = 24; |
| |
| // maximum number of concurrent data-paths (NDP) per data-interface (NDI) |
| optional int32 max_concurrent_ndp_per_ndi = 25; |
| |
| // histogram of durations of Aware being available |
| repeated HistogramBucket histogram_aware_available_duration_ms = 26; |
| |
| // histogram of durations of Aware being enabled |
| repeated HistogramBucket histogram_aware_enabled_duration_ms = 27; |
| |
| // histogram of duration (in ms) of attach sessions |
| repeated HistogramBucket histogram_attach_duration_ms = 28; |
| |
| // histogram of duration (in ms) of publish sessions |
| repeated HistogramBucket histogram_publish_session_duration_ms = 29; |
| |
| // histogram of duration (in ms) of subscribe sessions |
| repeated HistogramBucket histogram_subscribe_session_duration_ms = 30; |
| |
| // histogram of duration (in ms) of data-paths (NDP) |
| repeated HistogramBucket histogram_ndp_session_duration_ms = 31; |
| |
| // histogram of usage (in MB) of data-paths (NDP) |
| repeated HistogramBucket histogram_ndp_session_data_usage_mb = 32; |
| |
| // histogram of usage (in MB) of data-path creation time (in ms) measured as request -> confirm |
| repeated HistogramBucket histogram_ndp_creation_time_ms = 33; |
| |
| // statistics for data-path (NDP) creation time (in ms) measured as request -> confirm: minimum |
| optional int64 ndp_creation_time_ms_min = 34; |
| |
| // statistics for data-path (NDP) creation time (in ms) measured as request -> confirm: maximum |
| optional int64 ndp_creation_time_ms_max = 35; |
| |
| // statistics for data-path (NDP) creation time (in ms) measured as request -> confirm: sum |
| optional int64 ndp_creation_time_ms_sum = 36; |
| |
| // statistics for data-path (NDP) creation time (in ms) measured as request -> confirm: sum of sq |
| optional int64 ndp_creation_time_ms_sum_of_sq = 37; |
| |
| // statistics for data-path (NDP) creation time (in ms) measured as request -> confirm: number of |
| // samples |
| optional int64 ndp_creation_time_ms_num_samples = 38; |
| |
| // total time within the logging window that aware was available |
| optional int64 available_time_ms = 39; |
| |
| // total time within the logging window that aware was enabled |
| optional int64 enabled_time_ms = 40; |
| |
| // maximum number of concurrent publish sessions enabling ranging in a single app |
| optional int32 max_concurrent_publish_with_ranging_in_app = 41; |
| |
| // maximum number of concurrent subscribe sessions specifying a geofence in a single app |
| optional int32 max_concurrent_subscribe_with_ranging_in_app = 42; |
| |
| // maximum number of concurrent publish sessions enabling ranging in the system |
| optional int32 max_concurrent_publish_with_ranging_in_system = 43; |
| |
| // maximum number of concurrent subscribe sessions specifying a geofence in the system |
| optional int32 max_concurrent_subscribe_with_ranging_in_system = 44; |
| |
| // histogram of subscribe session geofence minimum (only when specified) |
| repeated HistogramBucket histogram_subscribe_geofence_min = 45; |
| |
| // histogram of subscribe session geofence maximum (only when specified) |
| repeated HistogramBucket histogram_subscribe_geofence_max = 46; |
| |
| // total number of subscribe sessions which enabled ranging |
| optional int32 num_subscribes_with_ranging = 47; |
| |
| // total number of matches (service discovery indication) with ranging provided |
| optional int32 num_matches_with_ranging = 48; |
| |
| // total number of matches (service discovery indication) for service discovery with ranging |
| // enabled which did not trigger ranging |
| optional int32 num_matches_without_ranging_for_ranging_enabled_subscribes = 49; |
| |
| // Histogram bucket for Wi-Fi Aware logs. Range is [start, end) |
| message HistogramBucket { |
| // lower range of the bucket (inclusive) |
| optional int64 start = 1; |
| |
| // upper range of the bucket (exclusive) |
| optional int64 end = 2; |
| |
| // number of samples in the bucket |
| optional int32 count = 3; |
| } |
| |
| // Status of various NAN operations |
| enum NanStatusTypeEnum { |
| // constant to be used by proto |
| UNKNOWN = 0; |
| |
| // NAN operation succeeded |
| SUCCESS = 1; |
| |
| // NAN Discovery Engine/Host driver failures |
| INTERNAL_FAILURE = 2; |
| |
| // NAN OTA failures |
| PROTOCOL_FAILURE = 3; |
| |
| // The publish/subscribe discovery session id is invalid |
| INVALID_SESSION_ID = 4; |
| |
| // Out of resources to fufill request |
| NO_RESOURCES_AVAILABLE = 5; |
| |
| // Invalid arguments passed |
| INVALID_ARGS = 6; |
| |
| // Invalid peer id |
| INVALID_PEER_ID = 7; |
| |
| // Invalid NAN data-path (ndp) id |
| INVALID_NDP_ID = 8; |
| |
| // Attempting to enable NAN when not available, e.g. wifi is disabled |
| NAN_NOT_ALLOWED = 9; |
| |
| // Over the air ACK not received |
| NO_OTA_ACK = 10; |
| |
| // Attempting to enable NAN when already enabled |
| ALREADY_ENABLED = 11; |
| |
| // Can't queue tx followup message foor transmission |
| FOLLOWUP_TX_QUEUE_FULL = 12; |
| |
| // Unsupported concurrency of NAN and another feature - NAN disabled |
| UNSUPPORTED_CONCURRENCY_NAN_DISABLED = 13; |
| |
| // Unknown NanStatusType |
| UNKNOWN_HAL_STATUS = 14; |
| } |
| |
| // Histogram bucket for Wi-Fi Aware (NAN) status. |
| message NanStatusHistogramBucket { |
| // status type defining the bucket |
| optional NanStatusTypeEnum nan_status_type = 1; |
| |
| // number of samples in the bucket |
| optional int32 count = 2; |
| } |
| } |
| |
| // Data point used to build 'Number of Connectable Network' histograms |
| message NumConnectableNetworksBucket { |
| // Number of connectable networks seen in a scan result |
| optional int32 num_connectable_networks = 1 [default = 0]; |
| |
| // Number of scan results with num_connectable_networks |
| optional int32 count = 2 [default = 0]; |
| } |
| |
| // Pno scan metrics |
| // Here "Pno Scan" refers to the session of offloaded scans, these metrics count the result of a |
| // single session, and not the individual scans within that session. |
| message PnoScanMetrics { |
| // Total number of attempts to offload pno scans |
| optional int32 num_pno_scan_attempts = 1; |
| |
| // Total number of pno scans failed |
| optional int32 num_pno_scan_failed = 2; |
| |
| // Number of pno scans started successfully over offload |
| optional int32 num_pno_scan_started_over_offload = 3; |
| |
| // Number of pno scans failed over offload |
| optional int32 num_pno_scan_failed_over_offload = 4; |
| |
| // Total number of pno scans that found any network |
| optional int32 num_pno_found_network_events = 5; |
| } |
| |
| // Number of occurrences for a particular "Connect to Network" Notification or |
| // notification Action. |
| message ConnectToNetworkNotificationAndActionCount { |
| |
| // "Connect to Network" notifications |
| enum Notification { |
| |
| // Default |
| NOTIFICATION_UNKNOWN = 0; |
| |
| // Initial notification with a recommended network. |
| NOTIFICATION_RECOMMEND_NETWORK = 1; |
| |
| // Notification when connecting to the recommended network. |
| NOTIFICATION_CONNECTING_TO_NETWORK = 2; |
| |
| // Notification when successfully connected to the network. |
| NOTIFICATION_CONNECTED_TO_NETWORK = 3; |
| |
| // Notification when failed to connect to network. |
| NOTIFICATION_FAILED_TO_CONNECT = 4; |
| } |
| |
| // "Connect to Network" notification actions |
| enum Action { |
| |
| // Default |
| ACTION_UNKNOWN = 0; |
| |
| // User dismissed the "Connect to Network" notification. |
| ACTION_USER_DISMISSED_NOTIFICATION = 1; |
| |
| // User tapped action button to connect to recommended network. |
| ACTION_CONNECT_TO_NETWORK = 2; |
| |
| // User tapped action button to open Wi-Fi Settings. |
| ACTION_PICK_WIFI_NETWORK = 3; |
| |
| // User tapped "Failed to connect" notification to open Wi-Fi Settings. |
| ACTION_PICK_WIFI_NETWORK_AFTER_CONNECT_FAILURE = 4; |
| } |
| |
| // Recommenders of the "Connect to Network" notification |
| enum Recommender { |
| |
| // Default. |
| RECOMMENDER_UNKNOWN = 0; |
| |
| // Open Network Available recommender. |
| RECOMMENDER_OPEN = 1; |
| } |
| |
| // Notification Type. |
| optional Notification notification = 1; |
| |
| // Action Type. |
| optional Action action = 2; |
| |
| // Recommender Type. |
| optional Recommender recommender = 3; |
| |
| // Occurrences of this action. |
| optional int32 count = 4; |
| } |
| |
| // SoftAP event tracking sessions and client counts |
| message SoftApConnectedClientsEvent { |
| |
| // Soft AP event Types |
| enum SoftApEventType { |
| |
| // Soft AP is Up and ready for use |
| SOFT_AP_UP = 0; |
| |
| // Soft AP is Down |
| SOFT_AP_DOWN = 1; |
| |
| // Number of connected soft AP clients has changed |
| NUM_CLIENTS_CHANGED = 2; |
| } |
| |
| // Soft AP channel bandwidth types |
| enum ChannelBandwidth { |
| |
| BANDWIDTH_INVALID = 0; |
| |
| BANDWIDTH_20_NOHT = 1; |
| |
| BANDWIDTH_20 = 2; |
| |
| BANDWIDTH_40 = 3; |
| |
| BANDWIDTH_80 = 4; |
| |
| BANDWIDTH_80P80 = 5; |
| |
| BANDWIDTH_160 = 6; |
| } |
| |
| // Type of event being recorded |
| optional SoftApEventType event_type = 1; |
| |
| // Time passed since last boot in milliseconds |
| optional int64 time_stamp_millis = 2; |
| |
| // Number of connected clients if event_type is NUM_CLIENTS_CHANGED, otherwise zero. |
| optional int32 num_connected_clients = 3; |
| |
| // Channel frequency used for Soft AP |
| optional int32 channel_frequency = 4; |
| |
| // Channel bandwidth used for Soft AP |
| optional ChannelBandwidth channel_bandwidth = 5; |
| } |
| |
| // Wps connection metrics |
| // Keeps track of Wi-Fi Protected Setup usage |
| message WpsMetrics { |
| // Total number of wps connection attempts |
| optional int32 num_wps_attempts = 1; |
| |
| // Total number of wps connection successes |
| optional int32 num_wps_success = 2; |
| |
| // Total number of wps failures on start |
| optional int32 num_wps_start_failure = 3; |
| |
| // Total number of wps overlap failure |
| optional int32 num_wps_overlap_failure = 4; |
| |
| // Total number of wps timeout failure |
| optional int32 num_wps_timeout_failure = 5; |
| |
| // Total number of other wps failure during connection |
| optional int32 num_wps_other_connection_failure = 6; |
| |
| // Total number of supplicant failure after wps |
| optional int32 num_wps_supplicant_failure = 7; |
| |
| // Total number of wps cancellation |
| optional int32 num_wps_cancellation = 8; |
| } |
| |
| // Power stats for Wifi |
| message WifiPowerStats { |
| |
| // Duration of log (ms) |
| optional int64 logging_duration_ms = 1; |
| |
| // Energy consumed by wifi (mAh) |
| optional double energy_consumed_mah = 2; |
| |
| // Amount of time wifi is in idle (ms) |
| optional int64 idle_time_ms = 3; |
| |
| // Amount of time wifi is in rx (ms) |
| optional int64 rx_time_ms = 4; |
| |
| // Amount of time wifi is in tx (ms) |
| optional int64 tx_time_ms = 5; |
| |
| // Amount of time kernel is active because of wifi data (ms) |
| optional int64 wifi_kernel_active_time_ms = 6; |
| |
| // Number of packets sent (tx) |
| optional int64 num_packets_tx = 7; |
| |
| // Number of bytes sent (tx) |
| optional int64 num_bytes_tx = 8; |
| |
| // Number of packets received (rx) |
| optional int64 num_packets_rx = 9; |
| |
| // Number of bytes sent (rx) |
| optional int64 num_bytes_rx = 10; |
| |
| // Amount of time wifi is in sleep (ms) |
| optional int64 sleep_time_ms = 11; |
| |
| // Amount of time wifi is scanning (ms) |
| optional int64 scan_time_ms = 12; |
| } |
| |
| // Metrics for Wifi Wake |
| message WifiWakeStats { |
| // An individual session for Wifi Wake |
| message Session { |
| // A Wifi Wake lifecycle event |
| message Event { |
| // Elapsed time in milliseconds since start of session. |
| optional int64 elapsed_time_millis = 1; |
| |
| // Number of scans that have occurred since start of session. |
| optional int32 elapsed_scans = 2; |
| } |
| |
| // Start time of session in milliseconds. |
| optional int64 start_time_millis = 1; |
| |
| // The number of networks the lock was provided with at start. |
| optional int32 locked_networks_at_start = 2; |
| |
| // The number of networks in the lock at the time of the initialize event. Only valid if |
| // initialize_event is recorded. |
| optional int32 locked_networks_at_initialize = 6; |
| |
| // Event for fully initializing the WakeupLock (i.e. WakeupLock is "locked"). |
| optional Event initialize_event = 7; |
| |
| // Event for unlocking the WakeupLock. Does not occur if lock was initialized with 0 networks. |
| optional Event unlock_event = 3; |
| |
| // Event for triggering wakeup. |
| optional Event wakeup_event = 4; |
| |
| // Event for WifiWake reset event. This event marks the end of a session. |
| optional Event reset_event = 5; |
| } |
| |
| // Total number of sessions for Wifi Wake. |
| optional int32 num_sessions = 1; |
| |
| // Session information for every Wifi Wake session (up to a maximum of 10). |
| repeated Session sessions = 2; |
| |
| // Number of ignored calls to start (due to WakeupController already being active). |
| optional int32 num_ignored_starts = 3; |
| |
| // Number of Wifi Wake sessions that have recorded wakeup events. |
| optional int32 num_wakeups = 4; |
| } |
| |
| // Metrics for Wi-Fi RTT |
| message WifiRttLog { |
| // Number of RTT request API calls |
| optional int32 num_requests = 1; |
| |
| // Histogram of RTT operation overall status |
| repeated RttOverallStatusHistogramBucket histogram_overall_status = 2; |
| |
| // RTT to Access Points metrics |
| optional RttToPeerLog rtt_to_ap = 3; |
| |
| // RTT to Wi-Fi Aware peers metrics |
| optional RttToPeerLog rtt_to_aware = 4; |
| |
| // Metrics for a RTT to Peer (peer = AP or Wi-Fi Aware) |
| message RttToPeerLog { |
| // Total number of API calls |
| optional int32 num_requests = 1; |
| |
| // Total number of individual requests |
| optional int32 num_individual_requests = 2; |
| |
| // Total number of apps which requested RTT |
| optional int32 num_apps = 3; |
| |
| // Histogram of total number of RTT requests by an app (WifiRttManager#startRanging) |
| repeated HistogramBucket histogram_num_requests_per_app = 4; |
| |
| // Histogram of number of peers in a single RTT request (RangingRequest entries) |
| repeated HistogramBucket histogram_num_peers_per_request = 5; |
| |
| // Histogram of status of individual RTT operations (RangingResult entries) |
| repeated RttIndividualStatusHistogramBucket histogram_individual_status = 6; |
| |
| // Histogram of measured distances (RangingResult entries) |
| repeated HistogramBucket histogram_distance = 7; |
| |
| // Histogram of interval of RTT requests by an app (WifiRttManager#startRanging) |
| repeated HistogramBucket histogram_request_interval_ms = 8; |
| } |
| |
| // Histogram bucket for Wi-Fi RTT logs. Range is [start, end) |
| message HistogramBucket { |
| // lower range of the bucket (inclusive) |
| optional int64 start = 1; |
| |
| // upper range of the bucket (exclusive) |
| optional int64 end = 2; |
| |
| // number of samples in the bucket |
| optional int32 count = 3; |
| } |
| |
| // Status codes for overall RTT operation |
| enum RttOverallStatusTypeEnum { |
| // constant to be used by proto |
| OVERALL_UNKNOWN = 0; |
| |
| // RTT operation succeeded (individual results may still fail) |
| OVERALL_SUCCESS = 1; |
| |
| // RTT operation failed (unspecified reason) |
| OVERALL_FAIL = 2; |
| |
| // RTT operation failed since RTT was not available (e.g. Airplane mode) |
| OVERALL_RTT_NOT_AVAILABLE = 3; |
| |
| // RTT operation timed-out: didn't receive response from HAL in expected time |
| OVERALL_TIMEOUT = 4; |
| |
| // RTT operation aborted since the app is spamming the service |
| OVERALL_THROTTLE = 5; |
| |
| // RTT request to HAL received immediate failure |
| OVERALL_HAL_FAILURE = 6; |
| |
| // RTT to Wi-Fi Aware peer using PeerHandle failed to get a MAC address translation |
| OVERALL_AWARE_TRANSLATION_FAILURE = 7; |
| |
| // RTT operation failed due to missing Location permission (post execution) |
| OVERALL_LOCATION_PERMISSION_MISSING = 8; |
| } |
| |
| // Status codes for individual RTT operation |
| enum RttIndividualStatusTypeEnum { |
| // constant to be used by proto |
| UNKNOWN = 0; |
| |
| // RTT operation succeeded |
| SUCCESS = 1; |
| |
| // RTT failure: generic reason (no further information) |
| FAILURE = 2; |
| |
| // Target STA does not respond to request |
| FAIL_NO_RSP = 3; |
| |
| // Request rejected. Applies to 2-sided RTT only |
| FAIL_REJECTED = 4; |
| |
| // Operation not scheduled |
| FAIL_NOT_SCHEDULED_YET = 5; |
| |
| // Timing measurement times out |
| FAIL_TM_TIMEOUT = 6; |
| |
| // Target on different channel, cannot range |
| FAIL_AP_ON_DIFF_CHANNEL = 7; |
| |
| // Ranging not supported |
| FAIL_NO_CAPABILITY = 8; |
| |
| // Request aborted for unknown reason |
| ABORTED = 9; |
| |
| // Invalid T1-T4 timestamp |
| FAIL_INVALID_TS = 10; |
| |
| // 11mc protocol failed |
| FAIL_PROTOCOL = 11; |
| |
| // Request could not be scheduled |
| FAIL_SCHEDULE = 12; |
| |
| // Responder cannot collaborate at time of request |
| FAIL_BUSY_TRY_LATER = 13; |
| |
| // Bad request args |
| INVALID_REQ = 14; |
| |
| // WiFi not enabled |
| NO_WIFI = 15; |
| |
| // Responder overrides param info, cannot range with new params |
| FAIL_FTM_PARAM_OVERRIDE = 16; |
| |
| // HAL did not provide a result to a framework request |
| MISSING_RESULT = 17; |
| } |
| |
| // Histogram bucket for Wi-Fi RTT overall operation status |
| message RttOverallStatusHistogramBucket { |
| // status type defining the bucket |
| optional RttOverallStatusTypeEnum status_type = 1; |
| |
| // number of samples in the bucket |
| optional int32 count = 2; |
| } |
| |
| // Histogram bucket for Wi-Fi RTT individual operation status |
| message RttIndividualStatusHistogramBucket { |
| // status type defining the bucket |
| optional RttIndividualStatusTypeEnum status_type = 1; |
| |
| // number of samples in the bucket |
| optional int32 count = 2; |
| } |
| } |
| |
| // Usage data for the wifi radio while device is running on battery. |
| message WifiRadioUsage { |
| // Duration of log (ms) |
| optional int64 logging_duration_ms = 1; |
| |
| // Total time for which the radio is awake due to scan. |
| optional int64 scan_time_ms = 2; |
| } |
| |
| message ExperimentValues { |
| // Indicates if we are logging WifiIsUnusableEvent in metrics |
| optional bool wifi_is_unusable_logging_enabled = 1; |
| |
| // Minimum number of txBad to trigger a data stall |
| optional int32 wifi_data_stall_min_tx_bad = 2; |
| |
| // Minimum number of txSuccess to trigger a data stall |
| // when rxSuccess is 0 |
| optional int32 wifi_data_stall_min_tx_success_without_rx = 3; |
| |
| // Indicates if we are logging LinkSpeedCount in metrics |
| optional bool link_speed_counts_logging_enabled = 4; |
| } |
| |
| message WifiIsUnusableEvent { |
| enum TriggerType { |
| // Default/Invalid event |
| TYPE_UNKNOWN = 0; |
| |
| // There is a data stall from tx failures |
| TYPE_DATA_STALL_BAD_TX = 1; |
| |
| // There is a data stall from rx failures |
| TYPE_DATA_STALL_TX_WITHOUT_RX = 2; |
| |
| // There is a data stall from both tx and rx failures |
| TYPE_DATA_STALL_BOTH = 3; |
| |
| // Firmware generated an alert |
| TYPE_FIRMWARE_ALERT = 4; |
| } |
| |
| // What event triggered WifiIsUnusableEvent. |
| optional TriggerType type = 1; |
| |
| // The timestamp at which this event occurred. |
| // Measured in milliseconds that have elapsed since the device booted. |
| optional int64 start_time_millis = 2; |
| |
| // NetworkAgent score of connected wifi. |
| // Defaults to -1 if the score was never set. |
| optional int32 last_score = 3 [default = -1]; |
| |
| // Delta of successfully transmitted (ACKed) unicast data packets |
| // between the last two WifiLinkLayerStats. |
| optional int64 tx_success_delta = 4; |
| |
| // Delta of transmitted unicast data retry packets |
| // between the last two WifiLinkLayerStats. |
| optional int64 tx_retries_delta = 5; |
| |
| // Delta of lost (not ACKed) transmitted unicast data packets |
| // between the last two WifiLinkLayerStats. |
| optional int64 tx_bad_delta = 6; |
| |
| // Delta of received unicast data packets |
| // between the last two WifiLinkLayerStats. |
| optional int64 rx_success_delta = 7; |
| |
| // Time in millisecond between the last two WifiLinkLayerStats. |
| optional int64 packet_update_time_delta = 8; |
| |
| // The timestamp at which the last WifiLinkLayerStats was updated. |
| // Measured in milliseconds that have elapsed since the device booted. |
| optional int64 last_link_layer_stats_update_time = 9; |
| |
| // Firmware alert code. Only valid when the event was triggered by a firmware alert, otherwise -1. |
| optional int32 firmware_alert_code = 10 [default = -1]; |
| |
| // NetworkAgent wifi usability score of connected wifi. |
| // Defaults to -1 if the score was never set. |
| optional int32 last_wifi_usability_score = 11 [default = -1]; |
| } |
| |
| message PasspointProfileTypeCount { |
| enum EapMethod { |
| // Unknown Type |
| TYPE_UNKNOWN = 0; |
| |
| // EAP_TLS (13) |
| TYPE_EAP_TLS = 1; |
| |
| // EAP_TTLS (21) |
| TYPE_EAP_TTLS = 2; |
| |
| // EAP_SIM (18) |
| TYPE_EAP_SIM = 3; |
| |
| // EAP_AKA (23) |
| TYPE_EAP_AKA = 4; |
| |
| // EAP_AKA_PRIME (50) |
| TYPE_EAP_AKA_PRIME = 5; |
| } |
| |
| // Eap method type set in Passpoint profile |
| optional EapMethod eap_method_type = 1; |
| |
| // Num of installed Passpoint profile with same eap method |
| optional int32 count = 2; |
| } |
| |
| message WifiLinkLayerUsageStats { |
| // Total logging duration in ms. |
| optional int64 logging_duration_ms = 1; |
| |
| // Total time the wifi radio is on in ms over the logging duration. |
| optional int64 radio_on_time_ms = 2; |
| |
| // Total time the wifi radio is doing tx in ms over the logging duration. |
| optional int64 radio_tx_time_ms = 3; |
| |
| // Total time the wifi radio is doing rx in ms over the logging duration. |
| optional int64 radio_rx_time_ms = 4; |
| |
| // Total time the wifi radio is scanning in ms over the logging duration. |
| optional int64 radio_scan_time_ms = 5; |
| |
| // Total time the wifi radio spent doing nan scans in ms over the logging duration. |
| optional int64 radio_nan_scan_time_ms = 6; |
| |
| // Total time the wifi radio spent doing background scans in ms over the logging duration. |
| optional int64 radio_background_scan_time_ms = 7; |
| |
| // Total time the wifi radio spent doing roam scans in ms over the logging duration. |
| optional int64 radio_roam_scan_time_ms = 8; |
| |
| // Total time the wifi radio spent doing pno scans in ms over the logging duration. |
| optional int64 radio_pno_scan_time_ms = 9; |
| |
| // Total time the wifi radio spent doing hotspot 2.0 scans and GAS exchange |
| // in ms over the logging duration. |
| optional int64 radio_hs20_scan_time_ms = 10; |
| } |
| |
| message WifiUsabilityStatsEntry { |
| // Absolute milliseconds from device boot when these stats were sampled |
| optional int64 time_stamp_ms = 1; |
| |
| // The RSSI at the sample time |
| optional int32 rssi = 2; |
| |
| // Link speed at the sample time in Mbps |
| optional int32 link_speed_mbps = 3; |
| |
| // The total number of tx success counted from the last radio chip reset |
| optional int64 total_tx_success = 4; |
| |
| // The total number of MPDU data packet retries counted from the last radio chip reset |
| optional int64 total_tx_retries = 5; |
| |
| // The total number of tx bad counted from the last radio chip reset |
| optional int64 total_tx_bad = 6; |
| |
| // The total number of rx success counted from the last radio chip reset |
| optional int64 total_rx_success = 7; |
| |
| // The total time the wifi radio is on in ms counted from the last radio chip reset |
| optional int64 total_radio_on_time_ms = 8; |
| |
| // The total time the wifi radio is doing tx in ms counted from the last radio chip reset |
| optional int64 total_radio_tx_time_ms = 9; |
| |
| // The total time the wifi radio is doing rx in ms counted from the last radio chip reset |
| optional int64 total_radio_rx_time_ms = 10; |
| |
| // The total time spent on all types of scans in ms counted from the last radio chip reset |
| optional int64 total_scan_time_ms = 11; |
| |
| // The total time spent on nan scans in ms counted from the last radio chip reset |
| optional int64 total_nan_scan_time_ms = 12; |
| |
| // The total time spent on background scans in ms counted from the last radio chip reset |
| optional int64 total_background_scan_time_ms = 13; |
| |
| // The total time spent on roam scans in ms counted from the last radio chip reset |
| optional int64 total_roam_scan_time_ms = 14; |
| |
| // The total time spent on pno scans in ms counted from the last radio chip reset |
| optional int64 total_pno_scan_time_ms = 15; |
| |
| // The total time spent on hotspot2.0 scans and GAS exchange in ms counted from the last radio |
| // chip reset |
| optional int64 total_hotspot_2_scan_time_ms = 16; |
| |
| // Internal framework Wifi score |
| optional int32 wifi_score = 17; |
| |
| // Wifi usability score provided by external system app |
| optional int32 wifi_usability_score = 18; |
| |
| // Sequence number from external system app to framework |
| optional int32 seq_num_to_framework = 19; |
| |
| // The total time CCA is on busy status on the current frequency in ms |
| // counted from the last radio chip reset |
| optional int64 total_cca_busy_freq_time_ms = 20; |
| |
| // The total radio on time of the current frequency from the last radio |
| // chip reset |
| optional int64 total_radio_on_freq_time_ms = 21; |
| |
| // The total number of beacons received from the last radio chip reset |
| optional int64 total_beacon_rx = 22; |
| } |
| |
| message WifiUsabilityStats { |
| enum Label { |
| // Default label |
| LABEL_UNKNOWN = 0; |
| |
| // Wifi is usable |
| LABEL_GOOD = 1; |
| |
| // Wifi is unusable |
| LABEL_BAD = 2; |
| } |
| |
| // The current wifi usability state |
| optional Label label = 1; |
| |
| // The list of timestamped wifi usability stats |
| repeated WifiUsabilityStatsEntry stats = 2; |
| } |
| |
| message DeviceMobilityStatePnoScanStats { |
| // see WifiManager.DEVICE_MOBILITY_STATE_* constants |
| enum DeviceMobilityState { |
| // Unknown mobility |
| UNKNOWN = 0; |
| |
| // High movement |
| HIGH_MVMT = 1; |
| |
| // Low movement |
| LOW_MVMT = 2; |
| |
| // Stationary |
| STATIONARY = 3; |
| } |
| |
| // The device mobility state |
| optional DeviceMobilityState device_mobility_state = 1; |
| |
| // The number of times that this state was entered |
| optional int32 num_times_entered_state = 2; |
| |
| // The total duration elapsed while in this mobility state, in ms |
| optional int64 total_duration_ms = 3; |
| |
| // the total duration elapsed while in this mobility state with PNO scans running, in ms |
| optional int64 pno_duration_ms = 4; |
| } |