| /* |
| * Copyright (C) 2012 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.media; |
| |
| import java.nio.ByteBuffer; |
| import java.util.HashMap; |
| import java.util.Map; |
| |
| /** |
| * Encapsulates the information describing the format of media data, |
| * be it audio or video. |
| * |
| * The format of the media data is specified as string/value pairs. |
| * |
| * Keys common to all audio/video formats, <b>all keys not marked optional are mandatory</b>: |
| * |
| * <table> |
| * <tr><th>Name</th><th>Value Type</th><th>Description</th></tr> |
| * <tr><td>{@link #KEY_MIME}</td><td>String</td><td>The type of the format.</td></tr> |
| * <tr><td>{@link #KEY_MAX_INPUT_SIZE}</td><td>Integer</td><td>optional, maximum size of a buffer of input data</td></tr> |
| * <tr><td>{@link #KEY_BIT_RATE}</td><td>Integer</td><td><b>encoder-only</b>, desired bitrate in bits/second</td></tr> |
| * </table> |
| * |
| * Video formats have the following keys: |
| * <table> |
| * <tr><th>Name</th><th>Value Type</th><th>Description</th></tr> |
| * <tr><td>{@link #KEY_WIDTH}</td><td>Integer</td><td></td></tr> |
| * <tr><td>{@link #KEY_HEIGHT}</td><td>Integer</td><td></td></tr> |
| * <tr><td>{@link #KEY_COLOR_FORMAT}</td><td>Integer</td><td>set by the user |
| * for encoders, readable in the output format of decoders</b></td></tr> |
| * <tr><td>{@link #KEY_FRAME_RATE}</td><td>Integer or Float</td><td><b>encoder-only</b></td></tr> |
| * <tr><td>{@link #KEY_CAPTURE_RATE}</td><td>Integer</td><td></td></tr> |
| * <tr><td>{@link #KEY_I_FRAME_INTERVAL}</td><td>Integer</td><td><b>encoder-only</b></td></tr> |
| * <tr><td>{@link #KEY_MAX_WIDTH}</td><td>Integer</td><td><b>decoder-only</b>, optional, max-resolution width</td></tr> |
| * <tr><td>{@link #KEY_MAX_HEIGHT}</td><td>Integer</td><td><b>decoder-only</b>, optional, max-resolution height</td></tr> |
| * <tr><td>{@link #KEY_REPEAT_PREVIOUS_FRAME_AFTER}</td><td>Long</td><td><b>video encoder in surface-mode only</b></td></tr> |
| * <tr><td>{@link #KEY_PUSH_BLANK_BUFFERS_ON_STOP}</td><td>Integer(1)</td><td><b>video decoder rendering to a surface only</b></td></tr> |
| * </table> |
| * Specify both {@link #KEY_MAX_WIDTH} and {@link #KEY_MAX_HEIGHT} to enable |
| * adaptive playback (seamless resolution change) for a video decoder that |
| * supports it ({@link MediaCodecInfo.CodecCapabilities#FEATURE_AdaptivePlayback}). |
| * The values are used as hints for the codec: they are the maximum expected |
| * resolution to prepare for. Depending on codec support, preparing for larger |
| * maximum resolution may require more memory even if that resolution is never |
| * reached. These fields have no effect for codecs that do not support adaptive |
| * playback.<br /><br /> |
| * |
| * Audio formats have the following keys: |
| * <table> |
| * <tr><th>Name</th><th>Value Type</th><th>Description</th></tr> |
| * <tr><td>{@link #KEY_CHANNEL_COUNT}</td><td>Integer</td><td></td></tr> |
| * <tr><td>{@link #KEY_SAMPLE_RATE}</td><td>Integer</td><td></td></tr> |
| * <tr><td>{@link #KEY_IS_ADTS}</td><td>Integer</td><td>optional, if <em>decoding</em> AAC audio content, setting this key to 1 indicates that each audio frame is prefixed by the ADTS header.</td></tr> |
| * <tr><td>{@link #KEY_AAC_PROFILE}</td><td>Integer</td><td><b>encoder-only</b>, optional, if content is AAC audio, specifies the desired profile.</td></tr> |
| * <tr><td>{@link #KEY_AAC_SBR_MODE}</td><td>Integer</td><td><b>encoder-only</b>, optional, if content is AAC audio, specifies the desired SBR mode.</td></tr> |
| * <tr><td>{@link #KEY_AAC_DRC_TARGET_REFERENCE_LEVEL}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies the target reference level.</td></tr> |
| * <tr><td>{@link #KEY_AAC_ENCODED_TARGET_LEVEL}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies the target reference level used at encoder.</td></tr> |
| * <tr><td>{@link #KEY_AAC_DRC_BOOST_FACTOR}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies the DRC boost factor.</td></tr> |
| * <tr><td>{@link #KEY_AAC_DRC_ATTENUATION_FACTOR}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies the DRC attenuation factor.</td></tr> |
| * <tr><td>{@link #KEY_AAC_DRC_HEAVY_COMPRESSION}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies whether to use heavy compression.</td></tr> |
| * <tr><td>{@link #KEY_AAC_MAX_OUTPUT_CHANNEL_COUNT}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies the maximum number of channels the decoder outputs.</td></tr> |
| * <tr><td>{@link #KEY_CHANNEL_MASK}</td><td>Integer</td><td>optional, a mask of audio channel assignments</td></tr> |
| * <tr><td>{@link #KEY_FLAC_COMPRESSION_LEVEL}</td><td>Integer</td><td><b>encoder-only</b>, optional, if content is FLAC audio, specifies the desired compression level.</td></tr> |
| * </table> |
| * |
| * Subtitle formats have the following keys: |
| * <table> |
| * <tr><td>{@link #KEY_MIME}</td><td>String</td><td>The type of the format.</td></tr> |
| * <tr><td>{@link #KEY_LANGUAGE}</td><td>String</td><td>The language of the content.</td></tr> |
| * </table> |
| */ |
| public final class MediaFormat { |
| public static final String MIMETYPE_VIDEO_VP8 = "video/x-vnd.on2.vp8"; |
| public static final String MIMETYPE_VIDEO_VP9 = "video/x-vnd.on2.vp9"; |
| public static final String MIMETYPE_VIDEO_AVC = "video/avc"; |
| public static final String MIMETYPE_VIDEO_HEVC = "video/hevc"; |
| public static final String MIMETYPE_VIDEO_MPEG4 = "video/mp4v-es"; |
| public static final String MIMETYPE_VIDEO_H263 = "video/3gpp"; |
| public static final String MIMETYPE_VIDEO_MPEG2 = "video/mpeg2"; |
| public static final String MIMETYPE_VIDEO_RAW = "video/raw"; |
| |
| public static final String MIMETYPE_AUDIO_AMR_NB = "audio/3gpp"; |
| public static final String MIMETYPE_AUDIO_AMR_WB = "audio/amr-wb"; |
| public static final String MIMETYPE_AUDIO_MPEG = "audio/mpeg"; |
| public static final String MIMETYPE_AUDIO_AAC = "audio/mp4a-latm"; |
| public static final String MIMETYPE_AUDIO_QCELP = "audio/qcelp"; |
| public static final String MIMETYPE_AUDIO_VORBIS = "audio/vorbis"; |
| public static final String MIMETYPE_AUDIO_OPUS = "audio/opus"; |
| public static final String MIMETYPE_AUDIO_G711_ALAW = "audio/g711-alaw"; |
| public static final String MIMETYPE_AUDIO_G711_MLAW = "audio/g711-mlaw"; |
| public static final String MIMETYPE_AUDIO_RAW = "audio/raw"; |
| public static final String MIMETYPE_AUDIO_FLAC = "audio/flac"; |
| public static final String MIMETYPE_AUDIO_MSGSM = "audio/gsm"; |
| public static final String MIMETYPE_AUDIO_AC3 = "audio/ac3"; |
| |
| /** |
| * MIME type for WebVTT subtitle data. |
| */ |
| public static final String MIMETYPE_TEXT_VTT = "text/vtt"; |
| |
| /** |
| * MIME type for CEA-608 closed caption data. |
| */ |
| public static final String MIMETYPE_TEXT_CEA_608 = "text/cea-608"; |
| |
| private Map<String, Object> mMap; |
| |
| /** |
| * A key prefix used together with a {@link MediaCodecInfo.CodecCapabilities} |
| * feature name describing a required or optional feature for a codec capabilities |
| * query. |
| * The associated value is an integer, where non-0 value means the feature is |
| * requested to be present, while 0 value means the feature is requested to be not |
| * present. |
| * @see MediaCodecList#findDecoderForFormat |
| * @see MediaCodecList#findEncoderForFormat |
| * @see MediaCodecInfo.CodecCapabilities#isFormatSupported |
| */ |
| public static final String KEY_FEATURE_ = "feature-"; |
| |
| /** |
| * A key describing the mime type of the MediaFormat. |
| * The associated value is a string. |
| */ |
| public static final String KEY_MIME = "mime"; |
| |
| /** |
| * A key describing the language of the content, using either ISO 639-1 |
| * or 639-2/T codes. The associated value is a string. |
| */ |
| public static final String KEY_LANGUAGE = "language"; |
| |
| /** |
| * A key describing the sample rate of an audio format. |
| * The associated value is an integer |
| */ |
| public static final String KEY_SAMPLE_RATE = "sample-rate"; |
| |
| /** |
| * A key describing the number of channels in an audio format. |
| * The associated value is an integer |
| */ |
| public static final String KEY_CHANNEL_COUNT = "channel-count"; |
| |
| /** |
| * A key describing the width of the content in a video format. |
| * The associated value is an integer |
| */ |
| public static final String KEY_WIDTH = "width"; |
| |
| /** |
| * A key describing the height of the content in a video format. |
| * The associated value is an integer |
| */ |
| public static final String KEY_HEIGHT = "height"; |
| |
| /** |
| * A key describing the maximum expected width of the content in a video |
| * decoder format, in case there are resolution changes in the video content. |
| * The associated value is an integer |
| */ |
| public static final String KEY_MAX_WIDTH = "max-width"; |
| |
| /** |
| * A key describing the maximum expected height of the content in a video |
| * decoder format, in case there are resolution changes in the video content. |
| * The associated value is an integer |
| */ |
| public static final String KEY_MAX_HEIGHT = "max-height"; |
| |
| /** A key describing the maximum size in bytes of a buffer of data |
| * described by this MediaFormat. |
| * The associated value is an integer |
| */ |
| public static final String KEY_MAX_INPUT_SIZE = "max-input-size"; |
| |
| /** |
| * A key describing the bitrate in bits/sec. |
| * The associated value is an integer |
| */ |
| public static final String KEY_BIT_RATE = "bitrate"; |
| |
| /** |
| * A key describing the color format of the content in a video format. |
| * Constants are declared in {@link android.media.MediaCodecInfo.CodecCapabilities}. |
| */ |
| public static final String KEY_COLOR_FORMAT = "color-format"; |
| |
| /** |
| * A key describing the frame rate of a video format in frames/sec. |
| * The associated value is an integer or a float. |
| */ |
| public static final String KEY_FRAME_RATE = "frame-rate"; |
| |
| /** |
| * A key describing the capture rate of a video format in frames/sec. |
| * <p> |
| * When capture rate is different than the frame rate, it means that the |
| * video is acquired at a different rate than the playback, which produces |
| * slow motion or timelapse effect during playback. Application can use the |
| * value of this key to tell the relative speed ratio between capture and |
| * playback rates when the video was recorded. |
| * </p> |
| * <p> |
| * The associated value is an integer or a float. |
| * </p> |
| */ |
| public static final String KEY_CAPTURE_RATE = "capture-rate"; |
| |
| /** |
| * A key describing the frequency of I frames expressed in secs |
| * between I frames. |
| * The associated value is an integer. |
| */ |
| public static final String KEY_I_FRAME_INTERVAL = "i-frame-interval"; |
| |
| /** |
| * A key describing the temporal layering schema. This is an optional parameter |
| * that applies only to video encoders. Use {@link MediaCodec#getInputFormat} |
| * after {@link MediaCodec#configure configure} to query if the encoder supports |
| * the desired schema. Supported values are {@code webrtc.vp8.1-layer}, |
| * {@code webrtc.vp8.2-layer}, {@code webrtc.vp8.3-layer}, and {@code none}. |
| * If the encoder does not support temporal layering, the input format will |
| * not have an entry with this key. |
| * The associated value is a string. |
| */ |
| public static final String KEY_TEMPORAL_LAYERING = "ts-schema"; |
| |
| /** |
| * @hide |
| */ |
| public static final String KEY_STRIDE = "stride"; |
| /** |
| * @hide |
| */ |
| public static final String KEY_SLICE_HEIGHT = "slice-height"; |
| |
| /** |
| * Applies only when configuring a video encoder in "surface-input" mode. |
| * The associated value is a long and gives the time in microseconds |
| * after which the frame previously submitted to the encoder will be |
| * repeated (once) if no new frame became available since. |
| */ |
| public static final String KEY_REPEAT_PREVIOUS_FRAME_AFTER |
| = "repeat-previous-frame-after"; |
| |
| /** |
| * If specified when configuring a video decoder rendering to a surface, |
| * causes the decoder to output "blank", i.e. black frames to the surface |
| * when stopped to clear out any previously displayed contents. |
| * The associated value is an integer of value 1. |
| */ |
| public static final String KEY_PUSH_BLANK_BUFFERS_ON_STOP |
| = "push-blank-buffers-on-shutdown"; |
| |
| /** |
| * A key describing the duration (in microseconds) of the content. |
| * The associated value is a long. |
| */ |
| public static final String KEY_DURATION = "durationUs"; |
| |
| /** |
| * A key mapping to a value of 1 if the content is AAC audio and |
| * audio frames are prefixed with an ADTS header. |
| * The associated value is an integer (0 or 1). |
| * This key is only supported when _decoding_ content, it cannot |
| * be used to configure an encoder to emit ADTS output. |
| */ |
| public static final String KEY_IS_ADTS = "is-adts"; |
| |
| /** |
| * A key describing the channel composition of audio content. This mask |
| * is composed of bits drawn from channel mask definitions in {@link android.media.AudioFormat}. |
| * The associated value is an integer. |
| */ |
| public static final String KEY_CHANNEL_MASK = "channel-mask"; |
| |
| /** |
| * A key describing the AAC profile to be used (AAC audio formats only). |
| * Constants are declared in {@link android.media.MediaCodecInfo.CodecProfileLevel}. |
| */ |
| public static final String KEY_AAC_PROFILE = "aac-profile"; |
| |
| /** |
| * A key describing the AAC SBR mode to be used (AAC audio formats only). |
| * The associated value is an integer and can be set to following values: |
| * <ul> |
| * <li>0 - no SBR should be applied</li> |
| * <li>1 - single rate SBR</li> |
| * <li>2 - double rate SBR</li> |
| * </ul> |
| * Note: If this key is not defined the default SRB mode for the desired AAC profile will |
| * be used. |
| * <p>This key is only used during encoding. |
| */ |
| public static final String KEY_AAC_SBR_MODE = "aac-sbr-mode"; |
| |
| /** |
| * A key describing the maximum number of channels that can be output by the AAC decoder. |
| * By default, the decoder will output the same number of channels as present in the encoded |
| * stream, if supported. Set this value to limit the number of output channels, and use |
| * the downmix information in the stream, if available. |
| * <p>Values larger than the number of channels in the content to decode are ignored. |
| * <p>This key is only used during decoding. |
| */ |
| public static final String KEY_AAC_MAX_OUTPUT_CHANNEL_COUNT = "aac-max-output-channel_count"; |
| |
| /** |
| * A key describing a gain to be applied so that the output loudness matches the |
| * Target Reference Level. This is typically used to normalize loudness across program items. |
| * The gain is derived as the difference between the Target Reference Level and the |
| * Program Reference Level. The latter can be given in the bitstream and indicates the actual |
| * loudness value of the program item. |
| * <p>The value is given as an integer value between |
| * 0 and 127, and is calculated as -0.25 * Target Reference Level in dBFS. |
| * Therefore, it represents the range of Full Scale (0 dBFS) to -31.75 dBFS. |
| * <p>This key is only used during decoding. |
| */ |
| public static final String KEY_AAC_DRC_TARGET_REFERENCE_LEVEL = "aac-target-ref-level"; |
| |
| /** |
| * A key describing the target reference level that was assumed at the encoder for |
| * calculation of attenuation gains for clipping prevention. This information can be provided |
| * if it is known, otherwise a worst-case assumption is used. |
| * <p>The value is given as an integer value between |
| * 0 and 127, and is calculated as -0.25 * Target Reference Level in dBFS. |
| * Therefore, it represents the range of Full Scale (0 dBFS) to -31.75 dBFS. |
| * The default value is the worst-case assumption of 127. |
| * <p>The value is ignored when heavy compression is used (see |
| * {@link #KEY_AAC_DRC_HEAVY_COMPRESSION}). |
| * <p>This key is only used during decoding. |
| */ |
| public static final String KEY_AAC_ENCODED_TARGET_LEVEL = "aac-encoded-target-level"; |
| |
| /** |
| * A key describing the boost factor allowing to adapt the dynamics of the output to the |
| * actual listening requirements. This relies on DRC gain sequences that can be transmitted in |
| * the encoded bitstream to be able to reduce the dynamics of the output signal upon request. |
| * This factor enables the user to select how much of the gains are applied. |
| * <p>Positive gains (boost) and negative gains (attenuation, see |
| * {@link #KEY_AAC_DRC_ATTENUATION_FACTOR}) can be controlled separately for a better match |
| * to different use-cases. |
| * <p>Typically, attenuation gains are sent for loud signal segments, and boost gains are sent |
| * for soft signal segments. If the output is listened to in a noisy environment, for example, |
| * the boost factor is used to enable the positive gains, i.e. to amplify soft signal segments |
| * beyond the noise floor. But for listening late at night, the attenuation |
| * factor is used to enable the negative gains, to prevent loud signal from surprising |
| * the listener. In applications which generally need a low dynamic range, both the boost factor |
| * and the attenuation factor are used in order to enable all DRC gains. |
| * <p>In order to prevent clipping, it is also recommended to apply the attenuation factors |
| * in case of a downmix and/or loudness normalization to high target reference levels. |
| * <p>Both the boost and the attenuation factor parameters are given as integer values |
| * between 0 and 127, representing the range of the factor of 0 (i.e. don't apply) |
| * to 1 (i.e. fully apply boost/attenuation factors respectively). |
| * <p>This key is only used during decoding. |
| */ |
| public static final String KEY_AAC_DRC_BOOST_FACTOR = "aac-drc-boost-level"; |
| |
| /** |
| * A key describing the attenuation factor allowing to adapt the dynamics of the output to the |
| * actual listening requirements. |
| * See {@link #KEY_AAC_DRC_BOOST_FACTOR} for a description of the role of this attenuation |
| * factor and the value range. |
| * <p>This key is only used during decoding. |
| */ |
| public static final String KEY_AAC_DRC_ATTENUATION_FACTOR = "aac-drc-cut-level"; |
| |
| /** |
| * A key describing the selection of the heavy compression profile for DRC. |
| * Two separate DRC gain sequences can be transmitted in one bitstream: MPEG-4 DRC light |
| * compression, and DVB-specific heavy compression. When selecting the application of the heavy |
| * compression, one of the sequences is selected: |
| * <ul> |
| * <li>0 enables light compression,</li> |
| * <li>1 enables heavy compression instead. |
| * </ul> |
| * Note that only light compression offers the features of scaling of DRC gains |
| * (see {@link #KEY_AAC_DRC_BOOST_FACTOR} and {@link #KEY_AAC_DRC_ATTENUATION_FACTOR} for the |
| * boost and attenuation factors, and frequency-selective (multiband) DRC. |
| * Light compression usually contains clipping prevention for stereo downmixing while heavy |
| * compression, if additionally provided in the bitstream, is usually stronger, and contains |
| * clipping prevention for stereo and mono downmixing. |
| * <p>The default is light compression. |
| * <p>This key is only used during decoding. |
| */ |
| public static final String KEY_AAC_DRC_HEAVY_COMPRESSION = "aac-drc-heavy-compression"; |
| |
| /** |
| * A key describing the FLAC compression level to be used (FLAC audio format only). |
| * The associated value is an integer ranging from 0 (fastest, least compression) |
| * to 8 (slowest, most compression). |
| */ |
| public static final String KEY_FLAC_COMPRESSION_LEVEL = "flac-compression-level"; |
| |
| /** |
| * A key describing the encoding complexity. |
| * The associated value is an integer. These values are device and codec specific, |
| * but lower values generally result in faster and/or less power-hungry encoding. |
| * |
| * @see MediaCodecInfo.CodecCapabilities.EncoderCapabilities#getComplexityRange |
| */ |
| public static final String KEY_COMPLEXITY = "complexity"; |
| |
| /** |
| * A key describing the desired encoding quality. |
| * The associated value is an integer. This key is only supported for encoders |
| * that are configured in constant-quality mode. These values are device and |
| * codec specific, but lower values generally result in more efficient |
| * (smaller-sized) encoding. |
| * |
| * @see MediaCodecInfo.CodecCapabilities.EncoderCapabilities#getQualityRange |
| */ |
| public static final String KEY_QUALITY = "quality"; |
| |
| /** |
| * A key describing the desired profile to be used by an encoder. |
| * Constants are declared in {@link MediaCodecInfo.CodecProfileLevel}. |
| * This key is only supported for codecs that specify a profile. |
| * |
| * @see MediaCodecInfo.CodecCapabilities#profileLevels |
| */ |
| public static final String KEY_PROFILE = "profile"; |
| |
| /** |
| * A key describing the desired bitrate mode to be used by an encoder. |
| * Constants are declared in {@link MediaCodecInfo.CodecCapabilities}. |
| * |
| * @see MediaCodecInfo.CodecCapabilities.EncoderCapabilities#isBitrateModeSupported |
| */ |
| public static final String KEY_BITRATE_MODE = "bitrate-mode"; |
| |
| /** |
| * A key describing the reference clock ID for a tunneled codec. |
| * The associated value is an integer. |
| * |
| * @see MediaCodecInfo.CodecCapabilities#FEATURE_TunneledPlayback |
| */ |
| public static final String KEY_REFERENCE_CLOCK_ID = "reference-clock-id"; |
| |
| /** |
| * A key for boolean AUTOSELECT behavior for the track. Tracks with AUTOSELECT=true |
| * are considered when automatically selecting a track without specific user |
| * choice, based on the current locale. |
| * This is currently only used for subtitle tracks, when the user selected |
| * 'Default' for the captioning locale. |
| * The associated value is an integer, where non-0 means TRUE. This is an optional |
| * field; if not specified, AUTOSELECT defaults to TRUE. |
| */ |
| public static final String KEY_IS_AUTOSELECT = "is-autoselect"; |
| |
| /** |
| * A key for boolean DEFAULT behavior for the track. The track with DEFAULT=true is |
| * selected in the absence of a specific user choice. |
| * This is currently only used for subtitle tracks, when the user selected |
| * 'Default' for the captioning locale. |
| * The associated value is an integer, where non-0 means TRUE. This is an optional |
| * field; if not specified, DEFAULT is considered to be FALSE. |
| */ |
| public static final String KEY_IS_DEFAULT = "is-default"; |
| |
| |
| /** |
| * A key for the FORCED field for subtitle tracks. True if it is a |
| * forced subtitle track. Forced subtitle tracks are essential for the |
| * content and are shown even when the user turns off Captions. They |
| * are used for example to translate foreign/alien dialogs or signs. |
| * The associated value is an integer, where non-0 means TRUE. This is an |
| * optional field; if not specified, FORCED defaults to FALSE. |
| */ |
| public static final String KEY_IS_FORCED_SUBTITLE = "is-forced-subtitle"; |
| |
| /* package private */ MediaFormat(Map<String, Object> map) { |
| mMap = map; |
| } |
| |
| /** |
| * Creates an empty MediaFormat |
| */ |
| public MediaFormat() { |
| mMap = new HashMap(); |
| } |
| |
| /* package private */ Map<String, Object> getMap() { |
| return mMap; |
| } |
| |
| /** |
| * Returns true iff a key of the given name exists in the format. |
| */ |
| public final boolean containsKey(String name) { |
| return mMap.containsKey(name); |
| } |
| |
| /** |
| * Returns the value of an integer key. |
| */ |
| public final int getInteger(String name) { |
| return ((Integer)mMap.get(name)).intValue(); |
| } |
| |
| /** |
| * Returns the value of an integer key, or the default value if the |
| * key is missing or is for another type value. |
| * @hide |
| */ |
| public final int getInteger(String name, int defaultValue) { |
| try { |
| return getInteger(name); |
| } |
| catch (NullPointerException e) { /* no such field */ } |
| catch (ClassCastException e) { /* field of different type */ } |
| return defaultValue; |
| } |
| |
| /** |
| * Returns the value of a long key. |
| */ |
| public final long getLong(String name) { |
| return ((Long)mMap.get(name)).longValue(); |
| } |
| |
| /** |
| * Returns the value of a float key. |
| */ |
| public final float getFloat(String name) { |
| return ((Float)mMap.get(name)).floatValue(); |
| } |
| |
| /** |
| * Returns the value of a string key. |
| */ |
| public final String getString(String name) { |
| return (String)mMap.get(name); |
| } |
| |
| /** |
| * Returns the value of a ByteBuffer key. |
| */ |
| public final ByteBuffer getByteBuffer(String name) { |
| return (ByteBuffer)mMap.get(name); |
| } |
| |
| /** |
| * Sets the value of an integer key. |
| */ |
| public final void setInteger(String name, int value) { |
| mMap.put(name, new Integer(value)); |
| } |
| |
| /** |
| * Sets the value of a long key. |
| */ |
| public final void setLong(String name, long value) { |
| mMap.put(name, new Long(value)); |
| } |
| |
| /** |
| * Sets the value of a float key. |
| */ |
| public final void setFloat(String name, float value) { |
| mMap.put(name, new Float(value)); |
| } |
| |
| /** |
| * Sets the value of a string key. |
| */ |
| public final void setString(String name, String value) { |
| mMap.put(name, value); |
| } |
| |
| /** |
| * Sets the value of a ByteBuffer key. |
| */ |
| public final void setByteBuffer(String name, ByteBuffer bytes) { |
| mMap.put(name, bytes); |
| } |
| |
| /** |
| * Creates a minimal audio format. |
| * @param mime The mime type of the content. |
| * @param sampleRate The sampling rate of the content. |
| * @param channelCount The number of audio channels in the content. |
| */ |
| public static final MediaFormat createAudioFormat( |
| String mime, |
| int sampleRate, |
| int channelCount) { |
| MediaFormat format = new MediaFormat(); |
| format.setString(KEY_MIME, mime); |
| format.setInteger(KEY_SAMPLE_RATE, sampleRate); |
| format.setInteger(KEY_CHANNEL_COUNT, channelCount); |
| |
| return format; |
| } |
| |
| /** |
| * Creates a minimal subtitle format. |
| * @param mime The mime type of the content. |
| * @param language The language of the content, using either ISO 639-1 or 639-2/T |
| * codes. Specify null or "und" if language information is only included |
| * in the content. (This will also work if there are multiple language |
| * tracks in the content.) |
| */ |
| public static final MediaFormat createSubtitleFormat( |
| String mime, |
| String language) { |
| MediaFormat format = new MediaFormat(); |
| format.setString(KEY_MIME, mime); |
| format.setString(KEY_LANGUAGE, language); |
| |
| return format; |
| } |
| |
| /** |
| * Creates a minimal video format. |
| * @param mime The mime type of the content. |
| * @param width The width of the content (in pixels) |
| * @param height The height of the content (in pixels) |
| */ |
| public static final MediaFormat createVideoFormat( |
| String mime, |
| int width, |
| int height) { |
| MediaFormat format = new MediaFormat(); |
| format.setString(KEY_MIME, mime); |
| format.setInteger(KEY_WIDTH, width); |
| format.setInteger(KEY_HEIGHT, height); |
| |
| return format; |
| } |
| |
| @Override |
| public String toString() { |
| return mMap.toString(); |
| } |
| } |