| /* |
| * Copyright (C) 2018 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.hardware.biometrics; |
| |
| import android.hardware.face.FaceManager; |
| |
| /** |
| * Interface containing all of the face-specific constants. |
| * |
| * NOTE: The error messages must be consistent between BiometricConstants, Biometric*Constants, |
| * and the frameworks/support/biometric/.../BiometricConstants files. |
| * |
| * @hide |
| */ |
| public interface BiometricFaceConstants { |
| // |
| // Error messages from face authentication hardware during initialization, enrollment, |
| // authentication or removal. Must agree with the list in HAL h file |
| // |
| /** |
| * The hardware is unavailable. Try again later. |
| */ |
| public static final int FACE_ERROR_HW_UNAVAILABLE = 1; |
| |
| /** |
| * Error state returned when the sensor was unable to process the current image. |
| */ |
| public static final int FACE_ERROR_UNABLE_TO_PROCESS = 2; |
| |
| /** |
| * Error state returned when the current request has been running too long. This is intended to |
| * prevent programs from waiting for the face authentication sensor indefinitely. The timeout is |
| * platform and sensor-specific, but is generally on the order of 30 seconds. |
| */ |
| public static final int FACE_ERROR_TIMEOUT = 3; |
| |
| /** |
| * Error state returned for operations like enrollment; the operation cannot be completed |
| * because there's not enough storage remaining to complete the operation. |
| */ |
| public static final int FACE_ERROR_NO_SPACE = 4; |
| |
| /** |
| * The operation was canceled because the face authentication sensor is unavailable. For |
| * example, this may happen when the user is switched, the device is locked or another pending |
| * operation prevents or disables it. |
| */ |
| public static final int FACE_ERROR_CANCELED = 5; |
| |
| /** |
| * The {@link FaceManager#remove} call failed. Typically this will happen when the |
| * provided face id was incorrect. |
| * |
| * @hide |
| */ |
| public static final int FACE_ERROR_UNABLE_TO_REMOVE = 6; |
| |
| /** |
| * The operation was canceled because the API is locked out due to too many attempts. |
| * This occurs after 5 failed attempts, and lasts for 30 seconds. |
| */ |
| public static final int FACE_ERROR_LOCKOUT = 7; |
| |
| /** |
| * Hardware vendors may extend this list if there are conditions that do not fall under one of |
| * the above categories. Vendors are responsible for providing error strings for these errors. |
| * These messages are typically reserved for internal operations such as enrollment, but may be |
| * used to express vendor errors not covered by the ones in HAL h file. Applications are |
| * expected to show the error message string if they happen, but are advised not to rely on the |
| * message id since they will be device and vendor-specific |
| */ |
| public static final int FACE_ERROR_VENDOR = 8; |
| |
| /** |
| * The operation was canceled because FACE_ERROR_LOCKOUT occurred too many times. |
| * Face authentication is disabled until the user unlocks with strong authentication |
| * (PIN/Pattern/Password) |
| */ |
| public static final int FACE_ERROR_LOCKOUT_PERMANENT = 9; |
| |
| /** |
| * The user canceled the operation. Upon receiving this, applications should use alternate |
| * authentication (e.g. a password). The application should also provide the means to return |
| * to face authentication, such as a "use face authentication" button. |
| */ |
| public static final int FACE_ERROR_USER_CANCELED = 10; |
| |
| /** |
| * The user does not have a face enrolled. |
| */ |
| public static final int FACE_ERROR_NOT_ENROLLED = 11; |
| |
| /** |
| * The device does not have a face sensor. This message will propagate if the calling app |
| * ignores the result from PackageManager.hasFeature(FEATURE_FACE) and calls |
| * this API anyway. Apps should always check for the feature before calling this API. |
| */ |
| public static final int FACE_ERROR_HW_NOT_PRESENT = 12; |
| |
| /** |
| * The user pressed the negative button. This is a placeholder that is currently only used |
| * by the support library. |
| * @hide |
| */ |
| public static final int FACE_ERROR_NEGATIVE_BUTTON = 13; |
| |
| /** |
| * @hide |
| */ |
| public static final int FACE_ERROR_VENDOR_BASE = 1000; |
| |
| // |
| // Image acquisition messages. These will not be sent to the user, since they conflict with |
| // existing constants. These must agree with face@1.0/types.hal. |
| // |
| |
| /** |
| * The image acquired was good. |
| */ |
| public static final int FACE_ACQUIRED_GOOD = 0; |
| |
| /** |
| * The face image was not good enough to process due to a detected condition. |
| * (See {@link #FACE_ACQUIRED_TOO_BRIGHT or @link #FACE_ACQUIRED_TOO_DARK}). |
| */ |
| public static final int FACE_ACQUIRED_INSUFFICIENT = 1; |
| |
| /** |
| * The face image was too bright due to too much ambient light. |
| * For example, it's reasonable to return this after multiple |
| * {@link #FACE_ACQUIRED_INSUFFICIENT} |
| * The user is expected to take action to retry in better lighting conditions |
| * when this is returned. |
| */ |
| public static final int FACE_ACQUIRED_TOO_BRIGHT = 2; |
| |
| /** |
| * The face image was too dark due to illumination light obscured. |
| * For example, it's reasonable to return this after multiple |
| * {@link #FACE_ACQUIRED_INSUFFICIENT} |
| * The user is expected to take action to retry in better lighting conditions |
| * when this is returned. |
| */ |
| public static final int FACE_ACQUIRED_TOO_DARK = 3; |
| |
| /** |
| * The detected face is too close to the sensor, and the image can't be processed. |
| * The user should be informed to move farther from the sensor when this is returned. |
| */ |
| public static final int FACE_ACQUIRED_TOO_CLOSE = 4; |
| |
| /** |
| * The detected face is too small, as the user might be too far from the sensor. |
| * The user should be informed to move closer to the sensor when this is returned. |
| */ |
| public static final int FACE_ACQUIRED_TOO_FAR = 5; |
| |
| /** |
| * Only the upper part of the face was detected. The sensor field of view is too high. |
| * The user should be informed to move up with respect to the sensor when this is returned. |
| */ |
| public static final int FACE_ACQUIRED_TOO_HIGH = 6; |
| |
| /** |
| * Only the lower part of the face was detected. The sensor field of view is too low. |
| * The user should be informed to move down with respect to the sensor when this is returned. |
| */ |
| public static final int FACE_ACQUIRED_TOO_LOW = 7; |
| |
| /** |
| * Only the right part of the face was detected. The sensor field of view is too far right. |
| * The user should be informed to move to the right with respect to the sensor |
| * when this is returned. |
| */ |
| public static final int FACE_ACQUIRED_TOO_RIGHT = 8; |
| |
| /** |
| * Only the left part of the face was detected. The sensor field of view is too far left. |
| * The user should be informed to move to the left with respect to the sensor |
| * when this is returned. |
| */ |
| public static final int FACE_ACQUIRED_TOO_LEFT = 9; |
| |
| /** |
| * The user's eyes have strayed away from the sensor. If this message is sent, the user should |
| * be informed to look at the device. If the user can't be found in the frame, one of the other |
| * acquisition messages should be sent, e.g. FACE_ACQUIRED_NOT_DETECTED. |
| */ |
| public static final int FACE_ACQUIRED_POOR_GAZE = 10; |
| |
| /** |
| * No face was detected in front of the sensor. |
| * The user should be informed to point the sensor to a face when this is returned. |
| */ |
| public static final int FACE_ACQUIRED_NOT_DETECTED = 11; |
| |
| /** |
| * Too much motion was detected. |
| * The user should be informed to keep their face steady relative to the |
| * sensor. |
| */ |
| public static final int FACE_ACQUIRED_TOO_MUCH_MOTION = 12; |
| |
| /** |
| * The sensor needs to be re-calibrated. This is an unexpected condition, and should only be |
| * sent if a serious, uncorrectable, and unrecoverable calibration issue is detected which |
| * requires user intervention, e.g. re-enrolling. The expected response to this message is to |
| * direct the user to re-enroll. |
| */ |
| public static final int FACE_ACQUIRED_RECALIBRATE = 13; |
| |
| /** |
| * The face is too different from a previous acquisition. This condition |
| * only applies to enrollment. This can happen if the user passes the |
| * device to someone else in the middle of enrollment. |
| */ |
| public static final int FACE_ACQUIRED_TOO_DIFFERENT = 14; |
| |
| /** |
| * The face is too similar to a previous acquisition. This condition only |
| * applies to enrollment. The user should change their pose. |
| */ |
| public static final int FACE_ACQUIRED_TOO_SIMILAR = 15; |
| |
| /** |
| * Hardware vendors may extend this list if there are conditions that do not fall under one of |
| * the above categories. Vendors are responsible for providing error strings for these errors. |
| * |
| * @hide |
| */ |
| public static final int FACE_ACQUIRED_VENDOR = 16; |
| |
| /** |
| * @hide |
| */ |
| public static final int FACE_ACQUIRED_VENDOR_BASE = 1000; |
| } |