| /* |
| * Copyright (C) 2014 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| |
| package android.view; |
| |
| import static android.view.WindowInsets.Type.FIRST; |
| import static android.view.WindowInsets.Type.IME; |
| import static android.view.WindowInsets.Type.LAST; |
| import static android.view.WindowInsets.Type.MANDATORY_SYSTEM_GESTURES; |
| import static android.view.WindowInsets.Type.NAVIGATION_BARS; |
| import static android.view.WindowInsets.Type.SIZE; |
| import static android.view.WindowInsets.Type.STATUS_BARS; |
| import static android.view.WindowInsets.Type.SYSTEM_GESTURES; |
| import static android.view.WindowInsets.Type.TAPPABLE_ELEMENT; |
| import static android.view.WindowInsets.Type.all; |
| import static android.view.WindowInsets.Type.indexOf; |
| import static android.view.WindowInsets.Type.systemBars; |
| import static android.view.WindowManager.LayoutParams.SOFT_INPUT_ADJUST_NOTHING; |
| import static android.view.WindowManager.LayoutParams.SOFT_INPUT_MASK_ADJUST; |
| |
| import android.annotation.IntDef; |
| import android.annotation.IntRange; |
| import android.annotation.NonNull; |
| import android.annotation.Nullable; |
| import android.compat.annotation.UnsupportedAppUsage; |
| import android.content.Intent; |
| import android.graphics.Insets; |
| import android.graphics.Rect; |
| import android.util.SparseArray; |
| import android.view.WindowInsets.Type.InsetsType; |
| import android.view.WindowManager.LayoutParams.SoftInputModeFlags; |
| import android.view.inputmethod.EditorInfo; |
| import android.view.inputmethod.InputMethod; |
| |
| import com.android.internal.util.Preconditions; |
| |
| import java.lang.annotation.Retention; |
| import java.lang.annotation.RetentionPolicy; |
| import java.util.Arrays; |
| import java.util.Objects; |
| |
| /** |
| * Describes a set of insets for window content. |
| * |
| * <p>WindowInsets are immutable and may be expanded to include more inset types in the future. |
| * To adjust insets, use one of the supplied clone methods to obtain a new WindowInsets instance |
| * with the adjusted properties.</p> |
| * |
| * <p>Note: Before {@link android.os.Build.VERSION_CODES#P P}, WindowInsets instances were only |
| * immutable during a single layout pass (i.e. would return the same values between |
| * {@link View#onApplyWindowInsets} and {@link View#onLayout}, but could return other values |
| * otherwise). Starting with {@link android.os.Build.VERSION_CODES#P P}, WindowInsets are |
| * always immutable and implement equality. |
| * |
| * @see View.OnApplyWindowInsetsListener |
| * @see View#onApplyWindowInsets(WindowInsets) |
| */ |
| public final class WindowInsets { |
| |
| private final Insets[] mTypeInsetsMap; |
| private final Insets[] mTypeMaxInsetsMap; |
| private final boolean[] mTypeVisibilityMap; |
| |
| @Nullable private Rect mTempRect; |
| private final boolean mIsRound; |
| @Nullable private final DisplayCutout mDisplayCutout; |
| |
| /** |
| * In multi-window we force show the navigation bar. Because we don't want that the surface size |
| * changes in this mode, we instead have a flag whether the navigation bar size should always |
| * be consumed, so the app is treated like there is no virtual navigation bar at all. |
| */ |
| private final boolean mAlwaysConsumeSystemBars; |
| |
| private final boolean mSystemWindowInsetsConsumed; |
| private final boolean mStableInsetsConsumed; |
| private final boolean mDisplayCutoutConsumed; |
| |
| private final int mCompatInsetTypes; |
| |
| /** |
| * Since new insets may be added in the future that existing apps couldn't |
| * know about, this fully empty constant shouldn't be made available to apps |
| * since it would allow them to inadvertently consume unknown insets by returning it. |
| * @hide |
| */ |
| @UnsupportedAppUsage |
| public static final WindowInsets CONSUMED; |
| |
| static { |
| CONSUMED = new WindowInsets((Rect) null, null, false, false, null); |
| } |
| |
| /** |
| * Construct a new WindowInsets from individual insets. |
| * |
| * A {@code null} inset indicates that the respective inset is consumed. |
| * |
| * @hide |
| * @deprecated Use {@link WindowInsets(SparseArray, SparseArray, boolean, boolean, DisplayCutout)} |
| */ |
| public WindowInsets(Rect systemWindowInsetsRect, Rect stableInsetsRect, |
| boolean isRound, boolean alwaysConsumeSystemBars, DisplayCutout displayCutout) { |
| this(createCompatTypeMap(systemWindowInsetsRect), createCompatTypeMap(stableInsetsRect), |
| createCompatVisibilityMap(createCompatTypeMap(systemWindowInsetsRect)), |
| isRound, alwaysConsumeSystemBars, displayCutout, systemBars()); |
| } |
| |
| /** |
| * Construct a new WindowInsets from individual insets. |
| * |
| * {@code typeInsetsMap} and {@code typeMaxInsetsMap} are a map of indexOf(type) -> insets that |
| * contain the information what kind of system bars causes how much insets. The insets in this |
| * map are non-additive; i.e. they have the same origin. In other words: If two system bars |
| * overlap on one side, the insets of the larger bar will also include the insets of the smaller |
| * bar. |
| * |
| * {@code null} type inset map indicates that the respective inset is fully consumed. |
| * @hide |
| */ |
| public WindowInsets(@Nullable Insets[] typeInsetsMap, |
| @Nullable Insets[] typeMaxInsetsMap, |
| boolean[] typeVisibilityMap, |
| boolean isRound, |
| boolean alwaysConsumeSystemBars, DisplayCutout displayCutout, int compatInsetTypes) { |
| mSystemWindowInsetsConsumed = typeInsetsMap == null; |
| mTypeInsetsMap = mSystemWindowInsetsConsumed |
| ? new Insets[SIZE] |
| : typeInsetsMap.clone(); |
| |
| mStableInsetsConsumed = typeMaxInsetsMap == null; |
| mTypeMaxInsetsMap = mStableInsetsConsumed |
| ? new Insets[SIZE] |
| : typeMaxInsetsMap.clone(); |
| |
| mTypeVisibilityMap = typeVisibilityMap; |
| mIsRound = isRound; |
| mAlwaysConsumeSystemBars = alwaysConsumeSystemBars; |
| mCompatInsetTypes = compatInsetTypes; |
| |
| mDisplayCutoutConsumed = displayCutout == null; |
| mDisplayCutout = (mDisplayCutoutConsumed || displayCutout.isEmpty()) |
| ? null : displayCutout; |
| } |
| |
| /** |
| * Construct a new WindowInsets, copying all values from a source WindowInsets. |
| * |
| * @param src Source to copy insets from |
| */ |
| public WindowInsets(WindowInsets src) { |
| this(src.mSystemWindowInsetsConsumed ? null : src.mTypeInsetsMap, |
| src.mStableInsetsConsumed ? null : src.mTypeMaxInsetsMap, |
| src.mTypeVisibilityMap, src.mIsRound, |
| src.mAlwaysConsumeSystemBars, displayCutoutCopyConstructorArgument(src), |
| src.mCompatInsetTypes); |
| } |
| |
| private static DisplayCutout displayCutoutCopyConstructorArgument(WindowInsets w) { |
| if (w.mDisplayCutoutConsumed) { |
| return null; |
| } else if (w.mDisplayCutout == null) { |
| return DisplayCutout.NO_CUTOUT; |
| } else { |
| return w.mDisplayCutout; |
| } |
| } |
| |
| /** |
| * @return The insets that include system bars indicated by {@code typeMask}, taken from |
| * {@code typeInsetsMap}. |
| */ |
| static Insets getInsets(Insets[] typeInsetsMap, @InsetsType int typeMask) { |
| Insets result = null; |
| for (int i = FIRST; i <= LAST; i = i << 1) { |
| if ((typeMask & i) == 0) { |
| continue; |
| } |
| Insets insets = typeInsetsMap[indexOf(i)]; |
| if (insets == null) { |
| continue; |
| } |
| if (result == null) { |
| result = insets; |
| } else { |
| result = Insets.max(result, insets); |
| } |
| } |
| return result == null ? Insets.NONE : result; |
| } |
| |
| /** |
| * Sets all entries in {@code typeInsetsMap} that belong to {@code typeMask} to {@code insets}, |
| */ |
| private static void setInsets(Insets[] typeInsetsMap, @InsetsType int typeMask, Insets insets) { |
| for (int i = FIRST; i <= LAST; i = i << 1) { |
| if ((typeMask & i) == 0) { |
| continue; |
| } |
| typeInsetsMap[indexOf(i)] = insets; |
| } |
| } |
| |
| /** @hide */ |
| @UnsupportedAppUsage |
| public WindowInsets(Rect systemWindowInsets) { |
| this(createCompatTypeMap(systemWindowInsets), null, new boolean[SIZE], false, false, null, |
| systemBars()); |
| } |
| |
| /** |
| * Creates a indexOf(type) -> inset map for which the {@code insets} is just mapped to |
| * {@link InsetsType#statusBars()} and {@link InsetsType#navigationBars()}, depending on the |
| * location of the inset. |
| */ |
| private static Insets[] createCompatTypeMap(@Nullable Rect insets) { |
| if (insets == null) { |
| return null; |
| } |
| Insets[] typeInsetsMap = new Insets[SIZE]; |
| assignCompatInsets(typeInsetsMap, insets); |
| return typeInsetsMap; |
| } |
| |
| /** |
| * @hide |
| */ |
| static void assignCompatInsets(Insets[] typeInsetsMap, Rect insets) { |
| typeInsetsMap[indexOf(STATUS_BARS)] = Insets.of(0, insets.top, 0, 0); |
| typeInsetsMap[indexOf(NAVIGATION_BARS)] = |
| Insets.of(insets.left, 0, insets.right, insets.bottom); |
| } |
| |
| private static boolean[] createCompatVisibilityMap(@Nullable Insets[] typeInsetsMap) { |
| boolean[] typeVisibilityMap = new boolean[SIZE]; |
| if (typeInsetsMap == null) { |
| return typeVisibilityMap; |
| } |
| for (int i = FIRST; i <= LAST; i = i << 1) { |
| int index = indexOf(i); |
| if (!Insets.NONE.equals(typeInsetsMap[index])) { |
| typeVisibilityMap[index] = true; |
| } |
| } |
| return typeVisibilityMap; |
| } |
| |
| /** |
| * Used to provide a safe copy of the system window insets to pass through |
| * to the existing fitSystemWindows method and other similar internals. |
| * @hide |
| * |
| * @deprecated use {@link #getSystemWindowInsets()} instead. |
| */ |
| @Deprecated |
| @NonNull |
| public Rect getSystemWindowInsetsAsRect() { |
| if (mTempRect == null) { |
| mTempRect = new Rect(); |
| } |
| Insets insets = getSystemWindowInsets(); |
| mTempRect.set(insets.left, insets.top, insets.right, insets.bottom); |
| return mTempRect; |
| } |
| |
| /** |
| * Returns the system window insets in pixels. |
| * |
| * <p>The system window inset represents the area of a full-screen window that is |
| * partially or fully obscured by the status bar, navigation bar, IME or other system windows. |
| * </p> |
| * |
| * @return The system window insets |
| */ |
| @NonNull |
| public Insets getSystemWindowInsets() { |
| return getInsets(mTypeInsetsMap, mCompatInsetTypes); |
| } |
| |
| /** |
| * Returns the insets of a specific set of windows causing insets, denoted by the |
| * {@code typeMask} bit mask of {@link InsetsType}s. |
| * |
| * @param typeMask Bit mask of {@link InsetsType}s to query the insets for. |
| * @return The insets. |
| */ |
| @NonNull |
| public Insets getInsets(@InsetsType int typeMask) { |
| return getInsets(mTypeInsetsMap, typeMask); |
| } |
| |
| /** |
| * Returns the maximum amount of insets a specific set of windows can cause, denoted by the |
| * {@code typeMask} bit mask of {@link InsetsType}s. |
| * |
| * <p>The maximum insets represents the area of a a window that that <b>may</b> be partially |
| * or fully obscured by the system window identified by {@code type}. This value does not |
| * change based on the visibility state of those elements. for example, if the status bar is |
| * normally shown, but temporarily hidden, the maximum inset will still provide the inset |
| * associated with the status bar being shown.</p> |
| * |
| * @param typeMask Bit mask of {@link InsetsType}s to query the insets for. |
| * @return The insets. |
| * |
| * @throws IllegalArgumentException If the caller tries to query {@link Type#ime()}. Maximum |
| * insets are not available for this type as the height of the |
| * IME is dynamic depending on the {@link EditorInfo} of the |
| * currently focused view, as well as the UI state of the IME. |
| */ |
| @NonNull |
| public Insets getMaxInsets(@InsetsType int typeMask) throws IllegalArgumentException { |
| if ((typeMask & IME) != 0) { |
| throw new IllegalArgumentException("Unable to query the maximum insets for IME"); |
| } |
| return getInsets(mTypeMaxInsetsMap, typeMask); |
| } |
| |
| /** |
| * Returns whether a set of windows that may cause insets is currently visible on screen, |
| * regardless of whether it actually overlaps with this window. |
| * |
| * @param typeMask Bit mask of {@link Type.InsetsType}s to query visibility status. |
| * @return {@code true} if and only if all windows included in {@code typeMask} are currently |
| * visible on screen. |
| */ |
| public boolean isVisible(@InsetsType int typeMask) { |
| for (int i = FIRST; i <= LAST; i = i << 1) { |
| if ((typeMask & i) == 0) { |
| continue; |
| } |
| if (!mTypeVisibilityMap[indexOf(i)]) { |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| /** |
| * Returns the left system window inset in pixels. |
| * |
| * <p>The system window inset represents the area of a full-screen window that is |
| * partially or fully obscured by the status bar, navigation bar, IME or other system windows. |
| * </p> |
| * |
| * @return The left system window inset |
| */ |
| public int getSystemWindowInsetLeft() { |
| return getSystemWindowInsets().left; |
| } |
| |
| /** |
| * Returns the top system window inset in pixels. |
| * |
| * <p>The system window inset represents the area of a full-screen window that is |
| * partially or fully obscured by the status bar, navigation bar, IME or other system windows. |
| * </p> |
| * |
| * @return The top system window inset |
| */ |
| public int getSystemWindowInsetTop() { |
| return getSystemWindowInsets().top; |
| } |
| |
| /** |
| * Returns the right system window inset in pixels. |
| * |
| * <p>The system window inset represents the area of a full-screen window that is |
| * partially or fully obscured by the status bar, navigation bar, IME or other system windows. |
| * </p> |
| * |
| * @return The right system window inset |
| */ |
| public int getSystemWindowInsetRight() { |
| return getSystemWindowInsets().right; |
| } |
| |
| /** |
| * Returns the bottom system window inset in pixels. |
| * |
| * <p>The system window inset represents the area of a full-screen window that is |
| * partially or fully obscured by the status bar, navigation bar, IME or other system windows. |
| * </p> |
| * |
| * @return The bottom system window inset |
| */ |
| public int getSystemWindowInsetBottom() { |
| return getSystemWindowInsets().bottom; |
| } |
| |
| /** |
| * Returns true if this WindowInsets has nonzero system window insets. |
| * |
| * <p>The system window inset represents the area of a full-screen window that is |
| * partially or fully obscured by the status bar, navigation bar, IME or other system windows. |
| * </p> |
| * |
| * @return true if any of the system window inset values are nonzero |
| */ |
| public boolean hasSystemWindowInsets() { |
| return !getSystemWindowInsets().equals(Insets.NONE); |
| } |
| |
| /** |
| * Returns true if this WindowInsets has any nonzero insets. |
| * |
| * @return true if any inset values are nonzero |
| */ |
| public boolean hasInsets() { |
| return !getInsets(mTypeInsetsMap, all()).equals(Insets.NONE) |
| || !getInsets(mTypeMaxInsetsMap, all()).equals(Insets.NONE) |
| || mDisplayCutout != null; |
| } |
| |
| /** |
| * Returns the display cutout if there is one. |
| * |
| * @return the display cutout or null if there is none |
| * @see DisplayCutout |
| */ |
| @Nullable |
| public DisplayCutout getDisplayCutout() { |
| return mDisplayCutout; |
| } |
| |
| /** |
| * Returns a copy of this WindowInsets with the cutout fully consumed. |
| * |
| * @return A modified copy of this WindowInsets |
| */ |
| @NonNull |
| public WindowInsets consumeDisplayCutout() { |
| return new WindowInsets(mSystemWindowInsetsConsumed ? null : mTypeInsetsMap, |
| mStableInsetsConsumed ? null : mTypeMaxInsetsMap, |
| mTypeVisibilityMap, |
| mIsRound, mAlwaysConsumeSystemBars, |
| null /* displayCutout */, |
| mCompatInsetTypes); |
| } |
| |
| |
| /** |
| * Check if these insets have been fully consumed. |
| * |
| * <p>Insets are considered "consumed" if the applicable <code>consume*</code> methods |
| * have been called such that all insets have been set to zero. This affects propagation of |
| * insets through the view hierarchy; insets that have not been fully consumed will continue |
| * to propagate down to child views.</p> |
| * |
| * <p>The result of this method is equivalent to the return value of |
| * {@link View#fitSystemWindows(android.graphics.Rect)}.</p> |
| * |
| * @return true if the insets have been fully consumed. |
| */ |
| public boolean isConsumed() { |
| return mSystemWindowInsetsConsumed && mStableInsetsConsumed |
| && mDisplayCutoutConsumed; |
| } |
| |
| /** |
| * Returns true if the associated window has a round shape. |
| * |
| * <p>A round window's left, top, right and bottom edges reach all the way to the |
| * associated edges of the window but the corners may not be visible. Views responding |
| * to round insets should take care to not lay out critical elements within the corners |
| * where they may not be accessible.</p> |
| * |
| * @return True if the window is round |
| */ |
| public boolean isRound() { |
| return mIsRound; |
| } |
| |
| /** |
| * Returns a copy of this WindowInsets with the system window insets fully consumed. |
| * |
| * @return A modified copy of this WindowInsets |
| */ |
| @NonNull |
| public WindowInsets consumeSystemWindowInsets() { |
| return new WindowInsets(null, mStableInsetsConsumed ? null : mTypeMaxInsetsMap, |
| mTypeVisibilityMap, |
| mIsRound, mAlwaysConsumeSystemBars, |
| displayCutoutCopyConstructorArgument(this), |
| mCompatInsetTypes); |
| } |
| |
| // TODO(b/119190588): replace @code with @link below |
| /** |
| * Returns a copy of this WindowInsets with selected system window insets replaced |
| * with new values. |
| * |
| * <p>Note: If the system window insets are already consumed, this method will return them |
| * unchanged on {@link android.os.Build.VERSION_CODES#Q Q} and later. Prior to |
| * {@link android.os.Build.VERSION_CODES#Q Q}, the new values were applied regardless of |
| * whether they were consumed, and this method returns invalid non-zero consumed insets. |
| * |
| * @param left New left inset in pixels |
| * @param top New top inset in pixels |
| * @param right New right inset in pixels |
| * @param bottom New bottom inset in pixels |
| * @return A modified copy of this WindowInsets |
| * @deprecated use {@code Builder#Builder(WindowInsets)} with |
| * {@link Builder#setSystemWindowInsets(Insets)} instead. |
| */ |
| @Deprecated |
| @NonNull |
| public WindowInsets replaceSystemWindowInsets(int left, int top, int right, int bottom) { |
| // Compat edge case: what should this do if the insets have already been consumed? |
| // On platforms prior to Q, the behavior was to override the insets with non-zero values, |
| // but leave them consumed, which is invalid (consumed insets must be zero). |
| // The behavior is now keeping them consumed and discarding the new insets. |
| if (mSystemWindowInsetsConsumed) { |
| return this; |
| } |
| return new Builder(this).setSystemWindowInsets(Insets.of(left, top, right, bottom)).build(); |
| } |
| |
| // TODO(b/119190588): replace @code with @link below |
| /** |
| * Returns a copy of this WindowInsets with selected system window insets replaced |
| * with new values. |
| * |
| * <p>Note: If the system window insets are already consumed, this method will return them |
| * unchanged on {@link android.os.Build.VERSION_CODES#Q Q} and later. Prior to |
| * {@link android.os.Build.VERSION_CODES#Q Q}, the new values were applied regardless of |
| * whether they were consumed, and this method returns invalid non-zero consumed insets. |
| * |
| * @param systemWindowInsets New system window insets. Each field is the inset in pixels |
| * for that edge |
| * @return A modified copy of this WindowInsets |
| * @deprecated use {@code Builder#Builder(WindowInsets)} with |
| * {@link Builder#setSystemWindowInsets(Insets)} instead. |
| */ |
| @Deprecated |
| @NonNull |
| public WindowInsets replaceSystemWindowInsets(Rect systemWindowInsets) { |
| return replaceSystemWindowInsets(systemWindowInsets.left, systemWindowInsets.top, |
| systemWindowInsets.right, systemWindowInsets.bottom); |
| } |
| |
| /** |
| * Returns the stable insets in pixels. |
| * |
| * <p>The stable inset represents the area of a full-screen window that <b>may</b> be |
| * partially or fully obscured by the system UI elements. This value does not change |
| * based on the visibility state of those elements; for example, if the status bar is |
| * normally shown, but temporarily hidden, the stable inset will still provide the inset |
| * associated with the status bar being shown.</p> |
| * |
| * @return The stable insets |
| */ |
| @NonNull |
| public Insets getStableInsets() { |
| return getInsets(mTypeMaxInsetsMap, mCompatInsetTypes); |
| } |
| |
| /** |
| * Returns the top stable inset in pixels. |
| * |
| * <p>The stable inset represents the area of a full-screen window that <b>may</b> be |
| * partially or fully obscured by the system UI elements. This value does not change |
| * based on the visibility state of those elements; for example, if the status bar is |
| * normally shown, but temporarily hidden, the stable inset will still provide the inset |
| * associated with the status bar being shown.</p> |
| * |
| * @return The top stable inset |
| */ |
| public int getStableInsetTop() { |
| return getStableInsets().top; |
| } |
| |
| /** |
| * Returns the left stable inset in pixels. |
| * |
| * <p>The stable inset represents the area of a full-screen window that <b>may</b> be |
| * partially or fully obscured by the system UI elements. This value does not change |
| * based on the visibility state of those elements; for example, if the status bar is |
| * normally shown, but temporarily hidden, the stable inset will still provide the inset |
| * associated with the status bar being shown.</p> |
| * |
| * @return The left stable inset |
| */ |
| public int getStableInsetLeft() { |
| return getStableInsets().left; |
| } |
| |
| /** |
| * Returns the right stable inset in pixels. |
| * |
| * <p>The stable inset represents the area of a full-screen window that <b>may</b> be |
| * partially or fully obscured by the system UI elements. This value does not change |
| * based on the visibility state of those elements; for example, if the status bar is |
| * normally shown, but temporarily hidden, the stable inset will still provide the inset |
| * associated with the status bar being shown.</p> |
| * |
| * @return The right stable inset |
| */ |
| public int getStableInsetRight() { |
| return getStableInsets().right; |
| } |
| |
| /** |
| * Returns the bottom stable inset in pixels. |
| * |
| * <p>The stable inset represents the area of a full-screen window that <b>may</b> be |
| * partially or fully obscured by the system UI elements. This value does not change |
| * based on the visibility state of those elements; for example, if the status bar is |
| * normally shown, but temporarily hidden, the stable inset will still provide the inset |
| * associated with the status bar being shown.</p> |
| * |
| * @return The bottom stable inset |
| */ |
| public int getStableInsetBottom() { |
| return getStableInsets().bottom; |
| } |
| |
| /** |
| * Returns true if this WindowInsets has nonzero stable insets. |
| * |
| * <p>The stable inset represents the area of a full-screen window that <b>may</b> be |
| * partially or fully obscured by the system UI elements. This value does not change |
| * based on the visibility state of those elements; for example, if the status bar is |
| * normally shown, but temporarily hidden, the stable inset will still provide the inset |
| * associated with the status bar being shown.</p> |
| * |
| * @return true if any of the stable inset values are nonzero |
| */ |
| public boolean hasStableInsets() { |
| return !getStableInsets().equals(Insets.NONE); |
| } |
| |
| /** |
| * Returns the system gesture insets. |
| * |
| * <p>The system gesture insets represent the area of a window where system gestures have |
| * priority and may consume some or all touch input, e.g. due to the a system bar |
| * occupying it, or it being reserved for touch-only gestures. |
| * |
| * <p>An app can declare priority over system gestures with |
| * {@link View#setSystemGestureExclusionRects} outside of the |
| * {@link #getMandatorySystemGestureInsets() mandatory system gesture insets}. |
| * |
| * <p>Note: the system will put a limit of <code>200dp</code> on the vertical extent of the |
| * exclusions it takes into account. The limit does not apply while the navigation |
| * bar is {@link View#SYSTEM_UI_FLAG_IMMERSIVE_STICKY stickily} hidden, nor to the |
| * {@link android.inputmethodservice.InputMethodService input method} and |
| * {@link Intent#CATEGORY_HOME home activity}. |
| * </p> |
| * |
| * |
| * <p>Simple taps are guaranteed to reach the window even within the system gesture insets, |
| * as long as they are outside the {@link #getTappableElementInsets() system window insets}. |
| * |
| * <p>When {@link View#SYSTEM_UI_FLAG_LAYOUT_STABLE} is requested, an inset will be returned |
| * even when the system gestures are inactive due to |
| * {@link View#SYSTEM_UI_FLAG_LAYOUT_FULLSCREEN} or |
| * {@link View#SYSTEM_UI_FLAG_LAYOUT_HIDE_NAVIGATION}. |
| * |
| * <p>This inset is consumed together with the {@link #getSystemWindowInsets() |
| * system window insets} by {@link #consumeSystemWindowInsets()}. |
| * |
| * @see #getMandatorySystemGestureInsets |
| */ |
| @NonNull |
| public Insets getSystemGestureInsets() { |
| return getInsets(mTypeInsetsMap, SYSTEM_GESTURES); |
| } |
| |
| /** |
| * Returns the mandatory system gesture insets. |
| * |
| * <p>The mandatory system gesture insets represent the area of a window where mandatory system |
| * gestures have priority and may consume some or all touch input, e.g. due to the a system bar |
| * occupying it, or it being reserved for touch-only gestures. |
| * |
| * <p>In contrast to {@link #getSystemGestureInsets regular system gestures}, <b>mandatory</b> |
| * system gestures cannot be overriden by {@link View#setSystemGestureExclusionRects}. |
| * |
| * <p>Simple taps are guaranteed to reach the window even within the system gesture insets, |
| * as long as they are outside the {@link #getTappableElementInsets() system window insets}. |
| * |
| * <p>When {@link View#SYSTEM_UI_FLAG_LAYOUT_STABLE} is requested, an inset will be returned |
| * even when the system gestures are inactive due to |
| * {@link View#SYSTEM_UI_FLAG_LAYOUT_FULLSCREEN} or |
| * {@link View#SYSTEM_UI_FLAG_LAYOUT_HIDE_NAVIGATION}. |
| * |
| * <p>This inset is consumed together with the {@link #getSystemWindowInsets() |
| * system window insets} by {@link #consumeSystemWindowInsets()}. |
| * |
| * @see #getSystemGestureInsets |
| */ |
| @NonNull |
| public Insets getMandatorySystemGestureInsets() { |
| return getInsets(mTypeInsetsMap, MANDATORY_SYSTEM_GESTURES); |
| } |
| |
| /** |
| * Returns the tappable element insets. |
| * |
| * <p>The tappable element insets represent how much tappable elements <b>must at least</b> be |
| * inset to remain both tappable and visually unobstructed by persistent system windows. |
| * |
| * <p>This may be smaller than {@link #getSystemWindowInsets()} if the system window is |
| * largely transparent and lets through simple taps (but not necessarily more complex gestures). |
| * |
| * <p>Note that generally, tappable elements <strong>should</strong> be aligned with the |
| * {@link #getSystemWindowInsets() system window insets} instead to avoid overlapping with the |
| * system bars. |
| * |
| * <p>When {@link View#SYSTEM_UI_FLAG_LAYOUT_STABLE} is requested, an inset will be returned |
| * even when the area covered by the inset would be tappable due to |
| * {@link View#SYSTEM_UI_FLAG_LAYOUT_FULLSCREEN} or |
| * {@link View#SYSTEM_UI_FLAG_LAYOUT_HIDE_NAVIGATION}. |
| * |
| * <p>This inset is consumed together with the {@link #getSystemWindowInsets() |
| * system window insets} by {@link #consumeSystemWindowInsets()}. |
| */ |
| @NonNull |
| public Insets getTappableElementInsets() { |
| return getInsets(mTypeInsetsMap, TAPPABLE_ELEMENT); |
| } |
| |
| /** |
| * Returns a copy of this WindowInsets with the stable insets fully consumed. |
| * |
| * @return A modified copy of this WindowInsets |
| */ |
| @NonNull |
| public WindowInsets consumeStableInsets() { |
| return new WindowInsets(mSystemWindowInsetsConsumed ? null : mTypeInsetsMap, null, |
| mTypeVisibilityMap, mIsRound, mAlwaysConsumeSystemBars, |
| displayCutoutCopyConstructorArgument(this), |
| mCompatInsetTypes); |
| } |
| |
| /** |
| * @hide |
| */ |
| public boolean shouldAlwaysConsumeSystemBars() { |
| return mAlwaysConsumeSystemBars; |
| } |
| |
| @Override |
| public String toString() { |
| return "WindowInsets{systemWindowInsets=" + getSystemWindowInsets() |
| + " stableInsets=" + getStableInsets() |
| + " sysGestureInsets=" + getSystemGestureInsets() |
| + (mDisplayCutout != null ? " cutout=" + mDisplayCutout : "") |
| + (isRound() ? " round" : "") |
| + "}"; |
| } |
| |
| /** |
| * Returns a copy of this instance inset in the given directions. |
| * |
| * @see #inset(int, int, int, int) |
| * @deprecated use {@link #inset(Insets)} |
| * @hide |
| */ |
| @Deprecated |
| @NonNull |
| public WindowInsets inset(Rect r) { |
| return inset(r.left, r.top, r.right, r.bottom); |
| } |
| |
| /** |
| * Returns a copy of this instance inset in the given directions. |
| * |
| * @see #inset(int, int, int, int) |
| * @hide |
| */ |
| @NonNull |
| public WindowInsets inset(Insets insets) { |
| return inset(insets.left, insets.top, insets.right, insets.bottom); |
| } |
| |
| /** |
| * Returns a copy of this instance inset in the given directions. |
| * |
| * This is intended for dispatching insets to areas of the window that are smaller than the |
| * current area. |
| * |
| * <p>Example: |
| * <pre> |
| * childView.dispatchApplyWindowInsets(insets.inset( |
| * childMarginLeft, childMarginTop, childMarginBottom, childMarginRight)); |
| * </pre> |
| * |
| * @param left the amount of insets to remove from the left. Must be non-negative. |
| * @param top the amount of insets to remove from the top. Must be non-negative. |
| * @param right the amount of insets to remove from the right. Must be non-negative. |
| * @param bottom the amount of insets to remove from the bottom. Must be non-negative. |
| * |
| * @return the inset insets |
| */ |
| @NonNull |
| public WindowInsets inset(@IntRange(from = 0) int left, @IntRange(from = 0) int top, |
| @IntRange(from = 0) int right, @IntRange(from = 0) int bottom) { |
| Preconditions.checkArgumentNonnegative(left); |
| Preconditions.checkArgumentNonnegative(top); |
| Preconditions.checkArgumentNonnegative(right); |
| Preconditions.checkArgumentNonnegative(bottom); |
| |
| return new WindowInsets( |
| mSystemWindowInsetsConsumed |
| ? null |
| : insetInsets(mTypeInsetsMap, left, top, right, bottom), |
| mStableInsetsConsumed |
| ? null |
| : insetInsets(mTypeMaxInsetsMap, left, top, right, bottom), |
| mTypeVisibilityMap, |
| mIsRound, mAlwaysConsumeSystemBars, |
| mDisplayCutoutConsumed |
| ? null |
| : mDisplayCutout == null |
| ? DisplayCutout.NO_CUTOUT |
| : mDisplayCutout.inset(left, top, right, bottom), |
| mCompatInsetTypes); |
| } |
| |
| @Override |
| public boolean equals(Object o) { |
| if (this == o) return true; |
| if (o == null || !(o instanceof WindowInsets)) return false; |
| WindowInsets that = (WindowInsets) o; |
| |
| return mIsRound == that.mIsRound |
| && mAlwaysConsumeSystemBars == that.mAlwaysConsumeSystemBars |
| && mSystemWindowInsetsConsumed == that.mSystemWindowInsetsConsumed |
| && mStableInsetsConsumed == that.mStableInsetsConsumed |
| && mDisplayCutoutConsumed == that.mDisplayCutoutConsumed |
| && Arrays.equals(mTypeInsetsMap, that.mTypeInsetsMap) |
| && Arrays.equals(mTypeMaxInsetsMap, that.mTypeMaxInsetsMap) |
| && Arrays.equals(mTypeVisibilityMap, that.mTypeVisibilityMap) |
| && Objects.equals(mDisplayCutout, that.mDisplayCutout); |
| } |
| |
| @Override |
| public int hashCode() { |
| return Objects.hash(Arrays.hashCode(mTypeInsetsMap), Arrays.hashCode(mTypeMaxInsetsMap), |
| Arrays.hashCode(mTypeVisibilityMap), mIsRound, mDisplayCutout, |
| mAlwaysConsumeSystemBars, mSystemWindowInsetsConsumed, mStableInsetsConsumed, |
| mDisplayCutoutConsumed); |
| } |
| |
| |
| /** |
| * Insets every inset in {@code typeInsetsMap} by the specified left, top, right, bottom. |
| * |
| * @return {@code typeInsetsMap} if no inset was modified; a copy of the map with the modified |
| * insets otherwise. |
| */ |
| private static Insets[] insetInsets( |
| Insets[] typeInsetsMap, int left, int top, int right, int bottom) { |
| boolean cloned = false; |
| for (int i = 0; i < SIZE; i++) { |
| Insets insets = typeInsetsMap[i]; |
| if (insets == null) { |
| continue; |
| } |
| Insets insetInsets = insetInsets(insets, left, top, right, bottom); |
| if (insetInsets != insets) { |
| if (!cloned) { |
| typeInsetsMap = typeInsetsMap.clone(); |
| cloned = true; |
| } |
| typeInsetsMap[i] = insetInsets; |
| } |
| } |
| return typeInsetsMap; |
| } |
| |
| static Insets insetInsets(Insets insets, int left, int top, int right, int bottom) { |
| int newLeft = Math.max(0, insets.left - left); |
| int newTop = Math.max(0, insets.top - top); |
| int newRight = Math.max(0, insets.right - right); |
| int newBottom = Math.max(0, insets.bottom - bottom); |
| if (newLeft == left && newTop == top && newRight == right && newBottom == bottom) { |
| return insets; |
| } |
| return Insets.of(newLeft, newTop, newRight, newBottom); |
| } |
| |
| /** |
| * @return whether system window insets have been consumed. |
| */ |
| boolean isSystemWindowInsetsConsumed() { |
| return mSystemWindowInsetsConsumed; |
| } |
| |
| /** |
| * Builder for WindowInsets. |
| */ |
| public static final class Builder { |
| |
| private final Insets[] mTypeInsetsMap; |
| private final Insets[] mTypeMaxInsetsMap; |
| private final boolean[] mTypeVisibilityMap; |
| private boolean mSystemInsetsConsumed = true; |
| private boolean mStableInsetsConsumed = true; |
| |
| private DisplayCutout mDisplayCutout; |
| |
| private boolean mIsRound; |
| private boolean mAlwaysConsumeSystemBars; |
| |
| /** |
| * Creates a builder where all insets are initially consumed. |
| */ |
| public Builder() { |
| mTypeInsetsMap = new Insets[SIZE]; |
| mTypeMaxInsetsMap = new Insets[SIZE]; |
| mTypeVisibilityMap = new boolean[SIZE]; |
| } |
| |
| /** |
| * Creates a builder where all insets are initialized from {@link WindowInsets}. |
| * |
| * @param insets the instance to initialize from. |
| */ |
| public Builder(@NonNull WindowInsets insets) { |
| mTypeInsetsMap = insets.mTypeInsetsMap.clone(); |
| mTypeMaxInsetsMap = insets.mTypeMaxInsetsMap.clone(); |
| mTypeVisibilityMap = insets.mTypeVisibilityMap.clone(); |
| mSystemInsetsConsumed = insets.mSystemWindowInsetsConsumed; |
| mStableInsetsConsumed = insets.mStableInsetsConsumed; |
| mDisplayCutout = displayCutoutCopyConstructorArgument(insets); |
| mIsRound = insets.mIsRound; |
| mAlwaysConsumeSystemBars = insets.mAlwaysConsumeSystemBars; |
| } |
| |
| /** |
| * Sets system window insets in pixels. |
| * |
| * <p>The system window inset represents the area of a full-screen window that is |
| * partially or fully obscured by the status bar, navigation bar, IME or other system |
| * windows.</p> |
| * |
| * @see #getSystemWindowInsets() |
| * @return itself |
| */ |
| @NonNull |
| public Builder setSystemWindowInsets(@NonNull Insets systemWindowInsets) { |
| Preconditions.checkNotNull(systemWindowInsets); |
| assignCompatInsets(mTypeInsetsMap, systemWindowInsets.toRect()); |
| mSystemInsetsConsumed = false; |
| return this; |
| } |
| |
| /** |
| * Sets system gesture insets in pixels. |
| * |
| * <p>The system gesture insets represent the area of a window where system gestures have |
| * priority and may consume some or all touch input, e.g. due to the a system bar |
| * occupying it, or it being reserved for touch-only gestures. |
| * |
| * @see #getSystemGestureInsets() |
| * @return itself |
| */ |
| @NonNull |
| public Builder setSystemGestureInsets(@NonNull Insets insets) { |
| WindowInsets.setInsets(mTypeInsetsMap, SYSTEM_GESTURES, insets); |
| return this; |
| } |
| |
| /** |
| * Sets mandatory system gesture insets in pixels. |
| * |
| * <p>The mandatory system gesture insets represent the area of a window where mandatory |
| * system gestures have priority and may consume some or all touch input, e.g. due to the a |
| * system bar occupying it, or it being reserved for touch-only gestures. |
| * |
| * <p>In contrast to {@link #setSystemGestureInsets regular system gestures}, |
| * <b>mandatory</b> system gestures cannot be overriden by |
| * {@link View#setSystemGestureExclusionRects}. |
| * |
| * @see #getMandatorySystemGestureInsets() |
| * @return itself |
| */ |
| @NonNull |
| public Builder setMandatorySystemGestureInsets(@NonNull Insets insets) { |
| WindowInsets.setInsets(mTypeInsetsMap, MANDATORY_SYSTEM_GESTURES, insets); |
| return this; |
| } |
| |
| /** |
| * Sets tappable element insets in pixels. |
| * |
| * <p>The tappable element insets represent how much tappable elements <b>must at least</b> |
| * be inset to remain both tappable and visually unobstructed by persistent system windows. |
| * |
| * @see #getTappableElementInsets() |
| * @return itself |
| */ |
| @NonNull |
| public Builder setTappableElementInsets(@NonNull Insets insets) { |
| WindowInsets.setInsets(mTypeInsetsMap, TAPPABLE_ELEMENT, insets); |
| return this; |
| } |
| |
| /** |
| * Sets the insets of a specific window type in pixels. |
| * |
| * <p>The insets represents the area of a a window that is partially or fully obscured by |
| * the system windows identified by {@code typeMask}. |
| * </p> |
| * |
| * @see #getInsets(int) |
| * |
| * @param typeMask The bitmask of {@link InsetsType} to set the insets for. |
| * @param insets The insets to set. |
| * |
| * @return itself |
| */ |
| @NonNull |
| public Builder setInsets(@InsetsType int typeMask, @NonNull Insets insets) { |
| Preconditions.checkNotNull(insets); |
| WindowInsets.setInsets(mTypeInsetsMap, typeMask, insets); |
| mSystemInsetsConsumed = false; |
| return this; |
| } |
| |
| /** |
| * Sets the maximum amount of insets a specific window type in pixels. |
| * |
| * <p>The maximum insets represents the area of a a window that that <b>may</b> be partially |
| * or fully obscured by the system windows identified by {@code typeMask}. This value does |
| * not change based on the visibility state of those elements. for example, if the status |
| * bar is normally shown, but temporarily hidden, the maximum inset will still provide the |
| * inset associated with the status bar being shown.</p> |
| * |
| * @see #getMaxInsets(int) |
| * |
| * @param typeMask The bitmask of {@link InsetsType} to set the insets for. |
| * @param insets The insets to set. |
| * |
| * @return itself |
| * |
| * @throws IllegalArgumentException If {@code typeMask} contains {@link Type#ime()}. Maximum |
| * insets are not available for this type as the height of |
| * the IME is dynamic depending on the {@link EditorInfo} |
| * of the currently focused view, as well as the UI |
| * state of the IME. |
| */ |
| @NonNull |
| public Builder setMaxInsets(@InsetsType int typeMask, @NonNull Insets insets) |
| throws IllegalArgumentException{ |
| if (typeMask == IME) { |
| throw new IllegalArgumentException("Maximum inset not available for IME"); |
| } |
| Preconditions.checkNotNull(insets); |
| WindowInsets.setInsets(mTypeMaxInsetsMap, typeMask, insets); |
| mStableInsetsConsumed = false; |
| return this; |
| } |
| |
| /** |
| * Sets whether windows that can cause insets are currently visible on screen. |
| * |
| * |
| * @see #isVisible(int) |
| * |
| * @param typeMask The bitmask of {@link InsetsType} to set the visibility for. |
| * @param visible Whether to mark the windows as visible or not. |
| * |
| * @return itself |
| */ |
| @NonNull |
| public Builder setVisible(@InsetsType int typeMask, boolean visible) { |
| for (int i = FIRST; i <= LAST; i = i << 1) { |
| if ((typeMask & i) == 0) { |
| continue; |
| } |
| mTypeVisibilityMap[indexOf(i)] = visible; |
| } |
| return this; |
| } |
| |
| /** |
| * Sets the stable insets in pixels. |
| * |
| * <p>The stable inset represents the area of a full-screen window that <b>may</b> be |
| * partially or fully obscured by the system UI elements. This value does not change |
| * based on the visibility state of those elements; for example, if the status bar is |
| * normally shown, but temporarily hidden, the stable inset will still provide the inset |
| * associated with the status bar being shown.</p> |
| * |
| * @see #getStableInsets() |
| * @return itself |
| */ |
| @NonNull |
| public Builder setStableInsets(@NonNull Insets stableInsets) { |
| Preconditions.checkNotNull(stableInsets); |
| assignCompatInsets(mTypeMaxInsetsMap, stableInsets.toRect()); |
| mStableInsetsConsumed = false; |
| return this; |
| } |
| |
| /** |
| * Sets the display cutout. |
| * |
| * @see #getDisplayCutout() |
| * @param displayCutout the display cutout or null if there is none |
| * @return itself |
| */ |
| @NonNull |
| public Builder setDisplayCutout(@Nullable DisplayCutout displayCutout) { |
| mDisplayCutout = displayCutout != null ? displayCutout : DisplayCutout.NO_CUTOUT; |
| return this; |
| } |
| |
| /** @hide */ |
| @NonNull |
| public Builder setRound(boolean round) { |
| mIsRound = round; |
| return this; |
| } |
| |
| /** @hide */ |
| @NonNull |
| public Builder setAlwaysConsumeSystemBars(boolean alwaysConsumeSystemBars) { |
| mAlwaysConsumeSystemBars = alwaysConsumeSystemBars; |
| return this; |
| } |
| |
| /** |
| * Builds a {@link WindowInsets} instance. |
| * |
| * @return the {@link WindowInsets} instance. |
| */ |
| @NonNull |
| public WindowInsets build() { |
| return new WindowInsets(mSystemInsetsConsumed ? null : mTypeInsetsMap, |
| mStableInsetsConsumed ? null : mTypeMaxInsetsMap, mTypeVisibilityMap, |
| mIsRound, mAlwaysConsumeSystemBars, mDisplayCutout, |
| systemBars()); |
| } |
| } |
| |
| /** |
| * Class that defines different types of sources causing window insets. |
| */ |
| public static final class Type { |
| |
| static final int FIRST = 1 << 0; |
| static final int STATUS_BARS = FIRST; |
| static final int NAVIGATION_BARS = 1 << 1; |
| static final int CAPTION_BAR = 1 << 2; |
| |
| static final int IME = 1 << 3; |
| |
| static final int SYSTEM_GESTURES = 1 << 4; |
| static final int MANDATORY_SYSTEM_GESTURES = 1 << 5; |
| static final int TAPPABLE_ELEMENT = 1 << 6; |
| |
| static final int LAST = 1 << 7; |
| static final int SIZE = 8; |
| static final int WINDOW_DECOR = LAST; |
| |
| static int indexOf(@InsetsType int type) { |
| switch (type) { |
| case STATUS_BARS: |
| return 0; |
| case NAVIGATION_BARS: |
| return 1; |
| case CAPTION_BAR: |
| return 2; |
| case IME: |
| return 3; |
| case SYSTEM_GESTURES: |
| return 4; |
| case MANDATORY_SYSTEM_GESTURES: |
| return 5; |
| case TAPPABLE_ELEMENT: |
| return 6; |
| case WINDOW_DECOR: |
| return 7; |
| default: |
| throw new IllegalArgumentException("type needs to be >= FIRST and <= LAST," |
| + " type=" + type); |
| } |
| } |
| |
| private Type() { |
| } |
| |
| /** @hide */ |
| @Retention(RetentionPolicy.SOURCE) |
| @IntDef(flag = true, value = {STATUS_BARS, NAVIGATION_BARS, CAPTION_BAR, IME, WINDOW_DECOR, |
| SYSTEM_GESTURES, MANDATORY_SYSTEM_GESTURES, TAPPABLE_ELEMENT}) |
| public @interface InsetsType { |
| } |
| |
| /** |
| * @return An insets type representing any system bars for displaying status. |
| */ |
| public static @InsetsType int statusBars() { |
| return STATUS_BARS; |
| } |
| |
| /** |
| * @return An insets type representing any system bars for navigation. |
| */ |
| public static @InsetsType int navigationBars() { |
| return NAVIGATION_BARS; |
| } |
| |
| /** |
| * @return An insets type representing the window of a caption bar. |
| */ |
| public static @InsetsType int captionBar() { |
| return CAPTION_BAR; |
| } |
| |
| /** |
| * @return An insets type representing the window of an {@link InputMethod}. |
| */ |
| public static @InsetsType int ime() { |
| return IME; |
| } |
| |
| /** |
| * @return An insets type representing decor that is being app-controlled. |
| */ |
| public static @InsetsType int windowDecor() { |
| return WINDOW_DECOR; |
| } |
| |
| /** |
| * Returns an insets type representing the system gesture insets. |
| * |
| * <p>The system gesture insets represent the area of a window where system gestures have |
| * priority and may consume some or all touch input, e.g. due to the a system bar |
| * occupying it, or it being reserved for touch-only gestures. |
| * |
| * <p>Simple taps are guaranteed to reach the window even within the system gesture insets, |
| * as long as they are outside the {@link #getSystemWindowInsets() system window insets}. |
| * |
| * <p>When {@link View#SYSTEM_UI_FLAG_LAYOUT_STABLE} is requested, an inset will be returned |
| * even when the system gestures are inactive due to |
| * {@link View#SYSTEM_UI_FLAG_LAYOUT_FULLSCREEN} or |
| * {@link View#SYSTEM_UI_FLAG_LAYOUT_HIDE_NAVIGATION}. |
| * |
| * @see #getSystemGestureInsets() |
| */ |
| public static @InsetsType int systemGestures() { |
| return SYSTEM_GESTURES; |
| } |
| |
| /** |
| * @see #getMandatorySystemGestureInsets |
| */ |
| public static @InsetsType int mandatorySystemGestures() { |
| return MANDATORY_SYSTEM_GESTURES; |
| } |
| |
| /** |
| * @see #getTappableElementInsets |
| */ |
| public static @InsetsType int tappableElement() { |
| return TAPPABLE_ELEMENT; |
| } |
| |
| /** |
| * @return All system bars. Includes {@link #statusBars()} as well as |
| * {@link #navigationBars()}, but not {@link #ime()}. |
| */ |
| public static @InsetsType int systemBars() { |
| return STATUS_BARS | NAVIGATION_BARS; |
| } |
| |
| /** |
| * @return All inset types combined. |
| * |
| * TODO: Figure out if this makes sense at all, mixing e.g {@link #systemGestures()} and |
| * {@link #ime()} does not seem very useful. |
| */ |
| public static @InsetsType int all() { |
| return 0xFFFFFFFF; |
| } |
| |
| /** |
| * Checks whether the specified type is considered to be part of visible insets. |
| * @hide |
| */ |
| public static boolean isVisibleInsetsType(int type, |
| @SoftInputModeFlags int softInputModeFlags) { |
| int softInputMode = softInputModeFlags & SOFT_INPUT_MASK_ADJUST; |
| return (type & Type.systemBars()) != 0 |
| || (softInputMode != SOFT_INPUT_ADJUST_NOTHING && (type & Type.ime()) != 0); |
| } |
| } |
| |
| /** |
| * Class that defines different sides for insets. |
| * @hide pending unhide |
| */ |
| public static final class Side { |
| |
| public static final int LEFT = 1 << 0; |
| public static final int TOP = 1 << 1; |
| public static final int RIGHT = 1 << 2; |
| public static final int BOTTOM = 1 << 3; |
| |
| private Side() { |
| } |
| |
| /** @hide */ |
| @Retention(RetentionPolicy.SOURCE) |
| @IntDef(flag = true, value = {LEFT, TOP, RIGHT, BOTTOM}) |
| public @interface InsetsSide {} |
| |
| /** |
| * @return all four sides. |
| */ |
| public static @InsetsSide int all() { |
| return LEFT | TOP | RIGHT | BOTTOM; |
| } |
| } |
| } |