| /* |
| * Copyright (C) 2016 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.hardware; |
| |
| import android.annotation.IntDef; |
| |
| import java.lang.annotation.Retention; |
| import java.lang.annotation.RetentionPolicy; |
| |
| /** |
| * This class represents a {@link android.hardware.Sensor Sensor} additional information frame, |
| * which is reported through listener callback {@link |
| * android.hardware.SensorEventCallback#onSensorAdditionalInfo onSensorAdditionalInfo}. |
| * |
| * @see SensorManager |
| * @see SensorEventCallback |
| * @see Sensor |
| * |
| */ |
| |
| public class SensorAdditionalInfo { |
| |
| /** |
| * The sensor that generated this event. See |
| * {@link android.hardware.SensorManager SensorManager} for details. |
| */ |
| public final Sensor sensor; |
| |
| /** |
| * Type of this additional info frame. |
| */ |
| public final int type; |
| |
| /** |
| * Sequence number of frame for a certain type. |
| */ |
| public final int serial; |
| |
| /** |
| * Additional info payload data represented in float values. Depending on the type of |
| * information, this may be null. |
| */ |
| public final float[] floatValues; |
| |
| /** |
| * Additional info payload data represented in int values. Depending on the type of information, |
| * this may be null. |
| */ |
| public final int[] intValues; |
| |
| /** |
| * Typical values of additional infomation type. The set of values is subject to extension in |
| * newer versions and vendors have the freedom of define their own custom values. |
| * |
| * @hide |
| */ |
| @IntDef(prefix = { "TYPE_" }, value = { |
| TYPE_FRAME_BEGIN, |
| TYPE_FRAME_END, |
| TYPE_UNTRACKED_DELAY, |
| TYPE_INTERNAL_TEMPERATURE, |
| TYPE_VEC3_CALIBRATION, |
| TYPE_SENSOR_PLACEMENT, |
| TYPE_SAMPLING |
| }) |
| @Retention(RetentionPolicy.SOURCE) |
| public @interface AdditionalInfoType {} |
| |
| /** |
| * Mark the beginning of a set of additional info frames. |
| */ |
| public static final int TYPE_FRAME_BEGIN = 0; |
| |
| /** |
| * Mark the end of a set of additional info frames. |
| */ |
| public static final int TYPE_FRAME_END = 1; |
| |
| /** |
| * Untracked delay. Delays that are introduced by data processing, such as filtering, which is |
| * not taken into account by sensor timestamps. |
| * |
| * Payload: |
| * floatValues[0]: delay estimation in seconds |
| * floatValues[1]: delay estimation standard deviation |
| */ |
| public static final int TYPE_UNTRACKED_DELAY = 0x10000; |
| |
| /** |
| * Internal temperature. Sensor hardware device internal temperature. |
| * |
| * Payload: |
| * floatValues[0]: internal temperature in Celsius. |
| */ |
| public static final int TYPE_INTERNAL_TEMPERATURE = 0x10001; |
| |
| /** |
| * Vector calibration parameter. Calibration applied to a sensor with 3 elements vector output, |
| * such as accelerometer, gyro, etc. |
| * |
| * Payload: |
| * floatValues[0..11]: First 3 rows of a homogeneous matrix in row major order that captures |
| * any linear transformation, including rotation, scaling, shear, shift. |
| */ |
| public static final int TYPE_VEC3_CALIBRATION = 0x10002; |
| |
| /** |
| * Sensor placement. Describes location and installation angle of the sensor device. |
| * |
| * Payload: |
| * floatValues[0..11]: First 3 rows of homogeneous matrix in row major order that describes |
| * the location and orientation of the sensor. Origin of reference will be the mobile device |
| * geometric sensor. Reference frame is defined as the same as Android sensor frame. |
| */ |
| public static final int TYPE_SENSOR_PLACEMENT = 0x10003; |
| |
| /** |
| * Sampling parameter. Describes the raw sample period and estimated jitter of sample time in |
| * terms of standard deviation. |
| * |
| * Payload: |
| * floatValues[0]: raw sample period in seconds. |
| * floatValues[1]: standard deviation of sampling period. |
| */ |
| public static final int TYPE_SAMPLING = 0x10004; |
| |
| /** |
| * Local geo-magnetic Field. |
| * |
| * Additional into to sensor hardware. Local geomagnetic field information based on |
| * device geo location. This type is primarily for for magnetic field calibration and rotation |
| * vector sensor fusion. |
| * |
| * float[3]: strength (uT), declination and inclination angle (rad). |
| * @hide |
| */ |
| public static final int TYPE_LOCAL_GEOMAGNETIC_FIELD = 0x30000; |
| |
| /** |
| * Local gravity acceleration strength. |
| * |
| * Additional info to sensor hardware for accelerometer calibration. |
| * |
| * float: gravitational acceleration norm in m/s^2. |
| * @hide |
| */ |
| public static final int TYPE_LOCAL_GRAVITY = 0x30001; |
| |
| /** |
| * Device dock state. |
| * |
| * Additional info to sensor hardware indicating dock states of device. |
| * |
| * int32_t: dock state following definition of {@link android.content.Intent#EXTRA_DOCK_STATE}. |
| * Undefined values are ignored. |
| * @hide |
| */ |
| public static final int TYPE_DOCK_STATE = 0x30002; |
| |
| /** |
| * High performance mode. |
| * |
| * Additional info to sensor hardware. Device is able to use up more power and take more |
| * resources to improve throughput and latency in high performance mode. One possible use case |
| * is virtual reality, when sensor latency need to be carefully controlled. |
| * |
| * int32_t: 1 or 0, denoting device is in or out of high performance mode, respectively. |
| * Other values are ignored. |
| * @hide |
| */ |
| public static final int TYPE_HIGH_PERFORMANCE_MODE = 0x30003; |
| |
| /** |
| * Magnetic field calibration hint. |
| * |
| * Additional info to sensor hardware. Device is notified when manually triggered magnetic field |
| * calibration procedure is started or stopped. The calibration procedure is assumed timed out |
| * after 1 minute from start, even if an explicit stop is not received. |
| * |
| * int32_t: 1 for calibration start, 0 for stop, other values are ignored. |
| * @hide |
| */ |
| public static final int TYPE_MAGNETIC_FIELD_CALIBRATION = 0x30004; |
| |
| /** |
| * Custom sensor info: array of float values interpreted by sensor based on the type |
| * Any type between TYPE_CUSTOM_INFO <= info_type < TYPE_DEBUG_INFO may be |
| * used to send custom sensor info. |
| * @hide |
| */ |
| public static final int TYPE_CUSTOM_INFO = 0x10000000; |
| /** @hide */ |
| public static final int TYPE_DEBUG_INFO = 0x40000000; |
| |
| SensorAdditionalInfo( |
| Sensor aSensor, int aType, int aSerial, int[] aIntValues, float[] aFloatValues) { |
| sensor = aSensor; |
| type = aType; |
| serial = aSerial; |
| intValues = aIntValues; |
| floatValues = aFloatValues; |
| } |
| |
| /** @hide */ |
| public static SensorAdditionalInfo createLocalGeomagneticField( |
| float strength, float declination, float inclination) { |
| if (strength < 10 || strength > 100 // much beyond extreme values on earth |
| || declination < 0 || declination > Math.PI |
| || inclination < -Math.PI / 2 || inclination > Math.PI / 2) { |
| throw new IllegalArgumentException("Geomagnetic field info out of range"); |
| } |
| |
| return new SensorAdditionalInfo( |
| null, TYPE_LOCAL_GEOMAGNETIC_FIELD, 0, |
| null, new float[] { strength, declination, inclination}); |
| } |
| /** @hide */ |
| public static SensorAdditionalInfo createCustomInfo(Sensor aSensor, int type, float[] data) { |
| if (type < TYPE_CUSTOM_INFO || type >= TYPE_DEBUG_INFO || aSensor == null) { |
| throw new IllegalArgumentException( |
| "invalid parameter(s): type: " + type + "; sensor: " + aSensor); |
| } |
| |
| return new SensorAdditionalInfo(aSensor, type, 0, null, data); |
| } |
| } |