| /* |
| ** |
| ** Copyright (C) 2008, The Android Open Source Project |
| ** Copyright (C) 2008 HTC Inc. |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| |
| //#define LOG_NDEBUG 0 |
| #define LOG_TAG "CameraService" |
| #include <utils/Log.h> |
| |
| #include <utils/IServiceManager.h> |
| #include <utils/IPCThreadState.h> |
| #include <utils/String16.h> |
| #include <utils/Errors.h> |
| #include <utils/MemoryBase.h> |
| #include <utils/MemoryHeapBase.h> |
| #include <ui/ICameraService.h> |
| |
| #include <media/mediaplayer.h> |
| #include <media/AudioSystem.h> |
| #include "CameraService.h" |
| |
| #include <cutils/properties.h> |
| |
| namespace android { |
| |
| extern "C" { |
| #include <stdio.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <fcntl.h> |
| #include <pthread.h> |
| #include <signal.h> |
| } |
| |
| // When you enable this, as well as DEBUG_REFS=1 and |
| // DEBUG_REFS_ENABLED_BY_DEFAULT=0 in libutils/RefBase.cpp, this will track all |
| // references to the CameraService::Client in order to catch the case where the |
| // client is being destroyed while a callback from the CameraHardwareInterface |
| // is outstanding. This is a serious bug because if we make another call into |
| // CameraHardwreInterface that itself triggers a callback, we will deadlock. |
| |
| #define DEBUG_CLIENT_REFERENCES 0 |
| |
| #define PICTURE_TIMEOUT seconds(5) |
| |
| #define DEBUG_DUMP_PREVIEW_FRAME_TO_FILE 0 /* n-th frame to write */ |
| #define DEBUG_DUMP_JPEG_SNAPSHOT_TO_FILE 0 |
| #define DEBUG_DUMP_YUV_SNAPSHOT_TO_FILE 0 |
| |
| #if DEBUG_DUMP_PREVIEW_FRAME_TO_FILE |
| static int debug_frame_cnt; |
| #endif |
| |
| static int getCallingPid() { |
| return IPCThreadState::self()->getCallingPid(); |
| } |
| |
| // ---------------------------------------------------------------------------- |
| |
| void CameraService::instantiate() { |
| defaultServiceManager()->addService( |
| String16("media.camera"), new CameraService()); |
| } |
| |
| // ---------------------------------------------------------------------------- |
| |
| CameraService::CameraService() : |
| BnCameraService() |
| { |
| LOGI("CameraService started: pid=%d", getpid()); |
| } |
| |
| CameraService::~CameraService() |
| { |
| if (mClient != 0) { |
| LOGE("mClient was still connected in destructor!"); |
| } |
| } |
| |
| sp<ICamera> CameraService::connect(const sp<ICameraClient>& cameraClient) |
| { |
| int callingPid = getCallingPid(); |
| LOGD("CameraService::connect E (pid %d, client %p)", callingPid, |
| cameraClient->asBinder().get()); |
| |
| Mutex::Autolock lock(mLock); |
| sp<Client> client; |
| if (mClient != 0) { |
| sp<Client> currentClient = mClient.promote(); |
| if (currentClient != 0) { |
| sp<ICameraClient> currentCameraClient(currentClient->getCameraClient()); |
| if (cameraClient->asBinder() == currentCameraClient->asBinder()) { |
| // This is the same client reconnecting... |
| LOGD("CameraService::connect X (pid %d, same client %p) is reconnecting...", |
| callingPid, cameraClient->asBinder().get()); |
| return currentClient; |
| } else { |
| // It's another client... reject it |
| LOGD("CameraService::connect X (pid %d, new client %p) rejected. " |
| "(old pid %d, old client %p)", |
| callingPid, cameraClient->asBinder().get(), |
| currentClient->mClientPid, currentCameraClient->asBinder().get()); |
| if (kill(currentClient->mClientPid, 0) == ESRCH) { |
| LOGD("The old client is dead!"); |
| } |
| return client; |
| } |
| } else { |
| // can't promote, the previous client has died... |
| LOGD("New client (pid %d) connecting, old reference was dangling...", |
| callingPid); |
| mClient.clear(); |
| } |
| } |
| |
| // create a new Client object |
| client = new Client(this, cameraClient, callingPid); |
| mClient = client; |
| #if DEBUG_CLIENT_REFERENCES |
| // Enable tracking for this object, and track increments and decrements of |
| // the refcount. |
| client->trackMe(true, true); |
| #endif |
| LOGD("CameraService::connect X"); |
| return client; |
| } |
| |
| void CameraService::removeClient(const sp<ICameraClient>& cameraClient) |
| { |
| int callingPid = getCallingPid(); |
| |
| // Declare this outside the lock to make absolutely sure the |
| // destructor won't be called with the lock held. |
| sp<Client> client; |
| |
| Mutex::Autolock lock(mLock); |
| |
| if (mClient == 0) { |
| // This happens when we have already disconnected. |
| LOGD("removeClient (pid %d): already disconnected", callingPid); |
| return; |
| } |
| |
| // Promote mClient. It can fail if we are called from this path: |
| // Client::~Client() -> disconnect() -> removeClient(). |
| client = mClient.promote(); |
| if (client == 0) { |
| LOGD("removeClient (pid %d): no more strong reference", callingPid); |
| mClient.clear(); |
| return; |
| } |
| |
| if (cameraClient->asBinder() != client->getCameraClient()->asBinder()) { |
| // ugh! that's not our client!! |
| LOGW("removeClient (pid %d): mClient doesn't match!", callingPid); |
| } else { |
| // okay, good, forget about mClient |
| mClient.clear(); |
| } |
| |
| LOGD("removeClient (pid %d) done", callingPid); |
| } |
| |
| static sp<MediaPlayer> newMediaPlayer(const char *file) |
| { |
| sp<MediaPlayer> mp = new MediaPlayer(); |
| if (mp->setDataSource(file) == NO_ERROR) { |
| char value[PROPERTY_VALUE_MAX]; |
| property_get("ro.camera.sound.forced", value, "0"); |
| if (atoi(value)) { |
| mp->setAudioStreamType(AudioSystem::ENFORCED_AUDIBLE); |
| } else { |
| mp->setAudioStreamType(AudioSystem::SYSTEM); |
| } |
| mp->prepare(); |
| } else { |
| mp.clear(); |
| LOGE("Failed to load CameraService sounds."); |
| } |
| return mp; |
| } |
| |
| CameraService::Client::Client(const sp<CameraService>& cameraService, |
| const sp<ICameraClient>& cameraClient, pid_t clientPid) |
| { |
| int callingPid = getCallingPid(); |
| LOGD("Client::Client E (pid %d)", callingPid); |
| mCameraService = cameraService; |
| mCameraClient = cameraClient; |
| mClientPid = clientPid; |
| mHardware = openCameraHardware(); |
| mUseOverlay = mHardware->useOverlay(); |
| |
| mMediaPlayerClick = newMediaPlayer("/system/media/audio/ui/camera_click.ogg"); |
| mMediaPlayerBeep = newMediaPlayer("/system/media/audio/ui/VideoRecord.ogg"); |
| |
| // Callback is disabled by default |
| mPreviewCallbackFlag = FRAME_CALLBACK_FLAG_NOOP; |
| LOGD("Client::Client X (pid %d)", callingPid); |
| } |
| |
| status_t CameraService::Client::checkPid() |
| { |
| int callingPid = getCallingPid(); |
| if (mClientPid == callingPid) return NO_ERROR; |
| LOGW("Attempt to use locked camera (client %p) from different process " |
| " (old pid %d, new pid %d)", |
| getCameraClient()->asBinder().get(), mClientPid, callingPid); |
| return -EBUSY; |
| } |
| |
| status_t CameraService::Client::lock() |
| { |
| int callingPid = getCallingPid(); |
| LOGD("lock from pid %d (mClientPid %d)", callingPid, mClientPid); |
| Mutex::Autolock _l(mLock); |
| // lock camera to this client if the the camera is unlocked |
| if (mClientPid == 0) { |
| mClientPid = callingPid; |
| return NO_ERROR; |
| } |
| // returns NO_ERROR if the client already owns the camera, -EBUSY otherwise |
| return checkPid(); |
| } |
| |
| status_t CameraService::Client::unlock() |
| { |
| int callingPid = getCallingPid(); |
| LOGD("unlock from pid %d (mClientPid %d)", callingPid, mClientPid); |
| Mutex::Autolock _l(mLock); |
| // allow anyone to use camera |
| status_t result = checkPid(); |
| if (result == NO_ERROR) { |
| mClientPid = 0; |
| LOGD("clear mCameraClient (pid %d)", callingPid); |
| // we need to remove the reference so that when app goes |
| // away, the reference count goes to 0. |
| mCameraClient.clear(); |
| } |
| return result; |
| } |
| |
| status_t CameraService::Client::connect(const sp<ICameraClient>& client) |
| { |
| int callingPid = getCallingPid(); |
| |
| // connect a new process to the camera |
| LOGD("Client::connect E (pid %d, client %p)", callingPid, client->asBinder().get()); |
| |
| // I hate this hack, but things get really ugly when the media recorder |
| // service is handing back the camera to the app. The ICameraClient |
| // destructor will be called during the same IPC, making it look like |
| // the remote client is trying to disconnect. This hack temporarily |
| // sets the mClientPid to an invalid pid to prevent the hardware from |
| // being torn down. |
| { |
| |
| // hold a reference to the old client or we will deadlock if the client is |
| // in the same process and we hold the lock when we remove the reference |
| sp<ICameraClient> oldClient; |
| { |
| Mutex::Autolock _l(mLock); |
| if (mClientPid != 0 && checkPid() != NO_ERROR) { |
| LOGW("Tried to connect to locked camera (old pid %d, new pid %d)", |
| mClientPid, callingPid); |
| return -EBUSY; |
| } |
| oldClient = mCameraClient; |
| |
| // did the client actually change? |
| if (client->asBinder() == mCameraClient->asBinder()) { |
| LOGD("Connect to the same client"); |
| return NO_ERROR; |
| } |
| |
| mCameraClient = client; |
| mClientPid = -1; |
| mPreviewCallbackFlag = FRAME_CALLBACK_FLAG_NOOP; |
| LOGD("Connect to the new client (pid %d, client %p)", |
| callingPid, mCameraClient->asBinder().get()); |
| } |
| |
| } |
| // the old client destructor is called when oldClient goes out of scope |
| // now we set the new PID to lock the interface again |
| mClientPid = callingPid; |
| |
| return NO_ERROR; |
| } |
| |
| #if HAVE_ANDROID_OS |
| static void *unregister_surface(void *arg) |
| { |
| ISurface *surface = (ISurface *)arg; |
| surface->unregisterBuffers(); |
| IPCThreadState::self()->flushCommands(); |
| return NULL; |
| } |
| #endif |
| |
| CameraService::Client::~Client() |
| { |
| int callingPid = getCallingPid(); |
| |
| // tear down client |
| LOGD("Client::~Client E (pid %d, client %p)", |
| callingPid, getCameraClient()->asBinder().get()); |
| if (mSurface != 0 && !mUseOverlay) { |
| #if HAVE_ANDROID_OS |
| pthread_t thr; |
| // We unregister the buffers in a different thread because binder does |
| // not let us make sychronous transactions in a binder destructor (that |
| // is, upon our reaching a refcount of zero.) |
| pthread_create(&thr, NULL, |
| unregister_surface, |
| mSurface.get()); |
| pthread_join(thr, NULL); |
| #else |
| mSurface->unregisterBuffers(); |
| #endif |
| } |
| |
| if (mMediaPlayerBeep.get() != NULL) { |
| mMediaPlayerBeep->disconnect(); |
| mMediaPlayerBeep.clear(); |
| } |
| if (mMediaPlayerClick.get() != NULL) { |
| mMediaPlayerClick->disconnect(); |
| mMediaPlayerClick.clear(); |
| } |
| |
| // make sure we tear down the hardware |
| mClientPid = callingPid; |
| disconnect(); |
| LOGD("Client::~Client X (pid %d)", mClientPid); |
| } |
| |
| void CameraService::Client::disconnect() |
| { |
| int callingPid = getCallingPid(); |
| |
| LOGD("Client::disconnect() E (pid %d client %p)", |
| callingPid, getCameraClient()->asBinder().get()); |
| |
| Mutex::Autolock lock(mLock); |
| if (mClientPid <= 0) { |
| LOGD("camera is unlocked (mClientPid = %d), don't tear down hardware", mClientPid); |
| return; |
| } |
| if (checkPid() != NO_ERROR) { |
| LOGD("Different client - don't disconnect"); |
| return; |
| } |
| |
| mCameraService->removeClient(mCameraClient); |
| if (mHardware != 0) { |
| LOGD("hardware teardown"); |
| // Before destroying mHardware, we must make sure it's in the |
| // idle state. |
| mHardware->stopPreview(); |
| // Cancel all picture callbacks. |
| mHardware->cancelPicture(true, true, true); |
| // Release the hardware resources. |
| mHardware->release(); |
| } |
| mHardware.clear(); |
| LOGD("Client::disconnect() X (pid %d)", callingPid); |
| } |
| |
| // pass the buffered ISurface to the camera service |
| status_t CameraService::Client::setPreviewDisplay(const sp<ISurface>& surface) |
| { |
| LOGD("setPreviewDisplay(%p) (pid %d)", surface.get(), getCallingPid()); |
| Mutex::Autolock lock(mLock); |
| status_t result = checkPid(); |
| if (result != NO_ERROR) return result; |
| Mutex::Autolock surfaceLock(mSurfaceLock); |
| // asBinder() is safe on NULL (returns NULL) |
| if (surface->asBinder() != mSurface->asBinder()) { |
| if (mSurface != 0 && !mUseOverlay) { |
| LOGD("clearing old preview surface %p", mSurface.get()); |
| mSurface->unregisterBuffers(); |
| } |
| mSurface = surface; |
| } |
| return NO_ERROR; |
| } |
| |
| // set the preview callback flag to affect how the received frames from |
| // preview are handled. |
| void CameraService::Client::setPreviewCallbackFlag(int callback_flag) |
| { |
| LOGV("setPreviewCallbackFlag (pid %d)", getCallingPid()); |
| Mutex::Autolock lock(mLock); |
| if (checkPid() != NO_ERROR) return; |
| mPreviewCallbackFlag = callback_flag; |
| } |
| |
| // start preview mode, must call setPreviewDisplay first |
| status_t CameraService::Client::startCameraMode(camera_mode mode) |
| { |
| int callingPid = getCallingPid(); |
| |
| LOGD("startCameraMode(%d) (pid %d)", mode, callingPid); |
| |
| /* we cannot call into mHardware with mLock held because |
| * mHardware has callbacks onto us which acquire this lock |
| */ |
| |
| Mutex::Autolock lock(mLock); |
| status_t result = checkPid(); |
| if (result != NO_ERROR) return result; |
| |
| if (mHardware == 0) { |
| LOGE("mHardware is NULL, returning."); |
| return INVALID_OPERATION; |
| } |
| |
| if (mSurface == 0) { |
| LOGE("setPreviewDisplay must be called before startCameraMode!"); |
| return INVALID_OPERATION; |
| } |
| |
| switch(mode) { |
| case CAMERA_RECORDING_MODE: |
| return startRecordingMode(); |
| |
| default: // CAMERA_PREVIEW_MODE |
| return startPreviewMode(); |
| } |
| } |
| |
| status_t CameraService::Client::startRecordingMode() |
| { |
| LOGD("startRecordingMode (pid %d)", getCallingPid()); |
| |
| status_t ret = UNKNOWN_ERROR; |
| |
| // if preview has not been started, start preview first |
| if (!mHardware->previewEnabled()) { |
| ret = startPreviewMode(); |
| if (ret != NO_ERROR) { |
| return ret; |
| } |
| } |
| |
| // if recording has been enabled, nothing needs to be done |
| if (mHardware->recordingEnabled()) { |
| return NO_ERROR; |
| } |
| |
| // start recording mode |
| ret = mHardware->startRecording(recordingCallback, |
| mCameraService.get()); |
| if (ret != NO_ERROR) { |
| LOGE("mHardware->startRecording() failed with status %d", ret); |
| } |
| return ret; |
| } |
| |
| status_t CameraService::Client::startPreviewMode() |
| { |
| LOGD("startPreviewMode (pid %d)", getCallingPid()); |
| |
| // if preview has been enabled, nothing needs to be done |
| if (mHardware->previewEnabled()) { |
| return NO_ERROR; |
| } |
| |
| // start preview mode |
| #if DEBUG_DUMP_PREVIEW_FRAME_TO_FILE |
| debug_frame_cnt = 0; |
| #endif |
| status_t ret = UNKNOWN_ERROR; |
| int w, h; |
| CameraParameters params(mHardware->getParameters()); |
| params.getPreviewSize(&w, &h); |
| |
| if (mUseOverlay) { |
| const char *format = params.getPreviewFormat(); |
| int fmt; |
| LOGD("Use Overlays"); |
| if (!strcmp(format, "yuv422i")) |
| fmt = OVERLAY_FORMAT_YCbCr_422_I; |
| else if (!strcmp(format, "rgb565")) |
| fmt = OVERLAY_FORMAT_RGB_565; |
| else { |
| LOGE("Invalid preview format for overlays"); |
| return -EINVAL; |
| } |
| sp<OverlayRef> ref = mSurface->createOverlay(w, h, fmt); |
| ret = mHardware->setOverlay(new Overlay(ref)); |
| if (ret != NO_ERROR) { |
| LOGE("mHardware->setOverlay() failed with status %d\n", ret); |
| return ret; |
| } |
| ret = mHardware->startPreview(NULL, mCameraService.get()); |
| if (ret != NO_ERROR) |
| LOGE("mHardware->startPreview() failed with status %d\n", ret); |
| |
| } else { |
| ret = mHardware->startPreview(previewCallback, |
| mCameraService.get()); |
| if (ret == NO_ERROR) { |
| |
| mSurface->unregisterBuffers(); |
| |
| uint32_t transform = 0; |
| if (params.getOrientation() == |
| CameraParameters::CAMERA_ORIENTATION_PORTRAIT) { |
| LOGV("portrait mode"); |
| transform = ISurface::BufferHeap::ROT_90; |
| } |
| ISurface::BufferHeap buffers(w, h, w, h, |
| PIXEL_FORMAT_YCbCr_420_SP, |
| transform, |
| 0, |
| mHardware->getPreviewHeap()); |
| |
| mSurface->registerBuffers(buffers); |
| } else { |
| LOGE("mHardware->startPreview() failed with status %d", ret); |
| } |
| } |
| return ret; |
| } |
| |
| status_t CameraService::Client::startPreview() |
| { |
| LOGD("startPreview (pid %d)", getCallingPid()); |
| |
| return startCameraMode(CAMERA_PREVIEW_MODE); |
| } |
| |
| status_t CameraService::Client::startRecording() |
| { |
| LOGD("startRecording (pid %d)", getCallingPid()); |
| |
| if (mMediaPlayerBeep.get() != NULL) { |
| mMediaPlayerBeep->seekTo(0); |
| mMediaPlayerBeep->start(); |
| } |
| return startCameraMode(CAMERA_RECORDING_MODE); |
| } |
| |
| // stop preview mode |
| void CameraService::Client::stopPreview() |
| { |
| LOGD("stopPreview (pid %d)", getCallingPid()); |
| |
| Mutex::Autolock lock(mLock); |
| if (checkPid() != NO_ERROR) return; |
| |
| if (mHardware == 0) { |
| LOGE("mHardware is NULL, returning."); |
| return; |
| } |
| |
| mHardware->stopPreview(); |
| LOGD("stopPreview(), hardware stopped OK"); |
| |
| if (mSurface != 0 && !mUseOverlay) { |
| mSurface->unregisterBuffers(); |
| } |
| mPreviewBuffer.clear(); |
| } |
| |
| // stop recording mode |
| void CameraService::Client::stopRecording() |
| { |
| LOGD("stopRecording (pid %d)", getCallingPid()); |
| |
| Mutex::Autolock lock(mLock); |
| if (checkPid() != NO_ERROR) return; |
| |
| if (mHardware == 0) { |
| LOGE("mHardware is NULL, returning."); |
| return; |
| } |
| |
| if (mMediaPlayerBeep.get() != NULL) { |
| mMediaPlayerBeep->seekTo(0); |
| mMediaPlayerBeep->start(); |
| } |
| mHardware->stopRecording(); |
| LOGD("stopRecording(), hardware stopped OK"); |
| mPreviewBuffer.clear(); |
| } |
| |
| // release a recording frame |
| void CameraService::Client::releaseRecordingFrame(const sp<IMemory>& mem) |
| { |
| Mutex::Autolock lock(mLock); |
| if (checkPid() != NO_ERROR) return; |
| |
| if (mHardware == 0) { |
| LOGE("mHardware is NULL, returning."); |
| return; |
| } |
| |
| mHardware->releaseRecordingFrame(mem); |
| } |
| |
| bool CameraService::Client::previewEnabled() |
| { |
| Mutex::Autolock lock(mLock); |
| if (mHardware == 0) return false; |
| return mHardware->previewEnabled(); |
| } |
| |
| bool CameraService::Client::recordingEnabled() |
| { |
| Mutex::Autolock lock(mLock); |
| if (mHardware == 0) return false; |
| return mHardware->recordingEnabled(); |
| } |
| |
| // Safely retrieves a strong pointer to the client during a hardware callback. |
| sp<CameraService::Client> CameraService::Client::getClientFromCookie(void* user) |
| { |
| sp<Client> client = 0; |
| CameraService *service = static_cast<CameraService*>(user); |
| if (service != NULL) { |
| Mutex::Autolock ourLock(service->mLock); |
| if (service->mClient != 0) { |
| client = service->mClient.promote(); |
| if (client == 0) { |
| LOGE("getClientFromCookie: client appears to have died"); |
| service->mClient.clear(); |
| } |
| } else { |
| LOGE("getClientFromCookie: got callback but client was NULL"); |
| } |
| } |
| return client; |
| } |
| |
| |
| #if DEBUG_DUMP_JPEG_SNAPSHOT_TO_FILE || \ |
| DEBUG_DUMP_YUV_SNAPSHOT_TO_FILE || \ |
| DEBUG_DUMP_PREVIEW_FRAME_TO_FILE |
| static void dump_to_file(const char *fname, |
| uint8_t *buf, uint32_t size) |
| { |
| int nw, cnt = 0; |
| uint32_t written = 0; |
| |
| LOGD("opening file [%s]\n", fname); |
| int fd = open(fname, O_RDWR | O_CREAT); |
| if (fd < 0) { |
| LOGE("failed to create file [%s]: %s", fname, strerror(errno)); |
| return; |
| } |
| |
| LOGD("writing %d bytes to file [%s]\n", size, fname); |
| while (written < size) { |
| nw = ::write(fd, |
| buf + written, |
| size - written); |
| if (nw < 0) { |
| LOGE("failed to write to file [%s]: %s", |
| fname, strerror(errno)); |
| break; |
| } |
| written += nw; |
| cnt++; |
| } |
| LOGD("done writing %d bytes to file [%s] in %d passes\n", |
| size, fname, cnt); |
| ::close(fd); |
| } |
| #endif |
| |
| // preview callback - frame buffer update |
| void CameraService::Client::previewCallback(const sp<IMemory>& mem, void* user) |
| { |
| LOGV("previewCallback()"); |
| sp<Client> client = getClientFromCookie(user); |
| if (client == 0) { |
| return; |
| } |
| |
| #if DEBUG_HEAP_LEAKS && 0 // debugging |
| if (gWeakHeap == NULL) { |
| ssize_t offset; |
| size_t size; |
| sp<IMemoryHeap> heap = mem->getMemory(&offset, &size); |
| if (gWeakHeap != heap) { |
| LOGD("SETTING PREVIEW HEAP"); |
| heap->trackMe(true, true); |
| gWeakHeap = heap; |
| } |
| } |
| #endif |
| |
| #if DEBUG_DUMP_PREVIEW_FRAME_TO_FILE |
| { |
| if (debug_frame_cnt++ == DEBUG_DUMP_PREVIEW_FRAME_TO_FILE) { |
| ssize_t offset; |
| size_t size; |
| sp<IMemoryHeap> heap = mem->getMemory(&offset, &size); |
| dump_to_file("/data/preview.yuv", |
| (uint8_t *)heap->base() + offset, size); |
| } |
| } |
| #endif |
| |
| // The strong pointer guarantees the client will exist, but no lock is held. |
| client->postPreviewFrame(mem); |
| |
| #if DEBUG_CLIENT_REFERENCES |
| //**** if the client's refcount is 1, then we are about to destroy it here, |
| // which is bad--print all refcounts. |
| if (client->getStrongCount() == 1) { |
| LOGE("++++++++++++++++ (PREVIEW) THIS WILL CAUSE A LOCKUP!"); |
| client->printRefs(); |
| } |
| #endif |
| } |
| |
| // recording callback |
| void CameraService::Client::recordingCallback(const sp<IMemory>& mem, void* user) |
| { |
| LOGV("recordingCallback"); |
| sp<Client> client = getClientFromCookie(user); |
| if (client == 0) { |
| return; |
| } |
| // The strong pointer guarantees the client will exist, but no lock is held. |
| client->postRecordingFrame(mem); |
| } |
| |
| // take a picture - image is returned in callback |
| status_t CameraService::Client::autoFocus() |
| { |
| LOGD("autoFocus (pid %d)", getCallingPid()); |
| |
| Mutex::Autolock lock(mLock); |
| status_t result = checkPid(); |
| if (result != NO_ERROR) return result; |
| |
| if (mHardware == 0) { |
| LOGE("mHardware is NULL, returning."); |
| return INVALID_OPERATION; |
| } |
| |
| return mHardware->autoFocus(autoFocusCallback, |
| mCameraService.get()); |
| } |
| |
| // take a picture - image is returned in callback |
| status_t CameraService::Client::takePicture() |
| { |
| LOGD("takePicture (pid %d)", getCallingPid()); |
| |
| Mutex::Autolock lock(mLock); |
| status_t result = checkPid(); |
| if (result != NO_ERROR) return result; |
| |
| if (mHardware == 0) { |
| LOGE("mHardware is NULL, returning."); |
| return INVALID_OPERATION; |
| } |
| |
| return mHardware->takePicture(shutterCallback, |
| yuvPictureCallback, |
| jpegPictureCallback, |
| mCameraService.get()); |
| } |
| |
| // picture callback - snapshot taken |
| void CameraService::Client::shutterCallback(void *user) |
| { |
| sp<Client> client = getClientFromCookie(user); |
| if (client == 0) { |
| return; |
| } |
| |
| // Play shutter sound. |
| if (client->mMediaPlayerClick.get() != NULL) { |
| client->mMediaPlayerClick->seekTo(0); |
| client->mMediaPlayerClick->start(); |
| } |
| |
| // Screen goes black after the buffer is unregistered. |
| if (client->mSurface != 0 && !client->mUseOverlay) { |
| client->mSurface->unregisterBuffers(); |
| } |
| |
| client->postShutter(); |
| |
| // It takes some time before yuvPicture callback to be called. |
| // Register the buffer for raw image here to reduce latency. |
| if (client->mSurface != 0 && !client->mUseOverlay) { |
| int w, h; |
| CameraParameters params(client->mHardware->getParameters()); |
| params.getPictureSize(&w, &h); |
| uint32_t transform = 0; |
| if (params.getOrientation() == CameraParameters::CAMERA_ORIENTATION_PORTRAIT) { |
| LOGV("portrait mode"); |
| transform = ISurface::BufferHeap::ROT_90; |
| } |
| ISurface::BufferHeap buffers(w, h, w, h, |
| PIXEL_FORMAT_YCbCr_420_SP, transform, 0, client->mHardware->getRawHeap()); |
| |
| client->mSurface->registerBuffers(buffers); |
| } |
| } |
| |
| // picture callback - raw image ready |
| void CameraService::Client::yuvPictureCallback(const sp<IMemory>& mem, |
| void *user) |
| { |
| sp<Client> client = getClientFromCookie(user); |
| if (client == 0) { |
| return; |
| } |
| if (mem == NULL) { |
| client->postRaw(NULL); |
| client->postError(UNKNOWN_ERROR); |
| return; |
| } |
| |
| ssize_t offset; |
| size_t size; |
| sp<IMemoryHeap> heap = mem->getMemory(&offset, &size); |
| #if DEBUG_HEAP_LEAKS && 0 // debugging |
| gWeakHeap = heap; // debugging |
| #endif |
| |
| //LOGV("yuvPictureCallback(%d, %d, %p)", offset, size, user); |
| #if DEBUG_DUMP_YUV_SNAPSHOT_TO_FILE // for testing pursposes only |
| dump_to_file("/data/photo.yuv", |
| (uint8_t *)heap->base() + offset, size); |
| #endif |
| |
| // Put the YUV version of the snapshot in the preview display. |
| if (client->mSurface != 0 && !client->mUseOverlay) { |
| client->mSurface->postBuffer(offset); |
| } |
| |
| client->postRaw(mem); |
| |
| #if DEBUG_CLIENT_REFERENCES |
| //**** if the client's refcount is 1, then we are about to destroy it here, |
| // which is bad--print all refcounts. |
| if (client->getStrongCount() == 1) { |
| LOGE("++++++++++++++++ (RAW) THIS WILL CAUSE A LOCKUP!"); |
| client->printRefs(); |
| } |
| #endif |
| } |
| |
| // picture callback - jpeg ready |
| void CameraService::Client::jpegPictureCallback(const sp<IMemory>& mem, void *user) |
| { |
| sp<Client> client = getClientFromCookie(user); |
| if (client == 0) { |
| return; |
| } |
| if (mem == NULL) { |
| client->postJpeg(NULL); |
| client->postError(UNKNOWN_ERROR); |
| return; |
| } |
| |
| /** We absolutely CANNOT call into user code with a lock held **/ |
| |
| #if DEBUG_DUMP_JPEG_SNAPSHOT_TO_FILE // for testing pursposes only |
| { |
| ssize_t offset; |
| size_t size; |
| sp<IMemoryHeap> heap = mem->getMemory(&offset, &size); |
| dump_to_file("/data/photo.jpg", |
| (uint8_t *)heap->base() + offset, size); |
| } |
| #endif |
| |
| client->postJpeg(mem); |
| |
| #if DEBUG_CLIENT_REFERENCES |
| //**** if the client's refcount is 1, then we are about to destroy it here, |
| // which is bad--print all refcounts. |
| if (client->getStrongCount() == 1) { |
| LOGE("++++++++++++++++ (JPEG) THIS WILL CAUSE A LOCKUP!"); |
| client->printRefs(); |
| } |
| #endif |
| } |
| |
| void CameraService::Client::autoFocusCallback(bool focused, void *user) |
| { |
| LOGV("autoFocusCallback"); |
| |
| sp<Client> client = getClientFromCookie(user); |
| if (client == 0) { |
| return; |
| } |
| |
| client->postAutoFocus(focused); |
| |
| #if DEBUG_CLIENT_REFERENCES |
| if (client->getStrongCount() == 1) { |
| LOGE("++++++++++++++++ (AUTOFOCUS) THIS WILL CAUSE A LOCKUP!"); |
| client->printRefs(); |
| } |
| #endif |
| } |
| |
| // set preview/capture parameters - key/value pairs |
| status_t CameraService::Client::setParameters(const String8& params) |
| { |
| LOGD("setParameters(%s)", params.string()); |
| |
| Mutex::Autolock lock(mLock); |
| status_t result = checkPid(); |
| if (result != NO_ERROR) return result; |
| |
| if (mHardware == 0) { |
| LOGE("mHardware is NULL, returning."); |
| return INVALID_OPERATION; |
| } |
| |
| CameraParameters p(params); |
| mHardware->setParameters(p); |
| return NO_ERROR; |
| } |
| |
| // get preview/capture parameters - key/value pairs |
| String8 CameraService::Client::getParameters() const |
| { |
| Mutex::Autolock lock(mLock); |
| |
| if (mHardware == 0) { |
| LOGE("mHardware is NULL, returning."); |
| return String8(); |
| } |
| |
| String8 params(mHardware->getParameters().flatten()); |
| LOGD("getParameters(%s)", params.string()); |
| return params; |
| } |
| |
| void CameraService::Client::postAutoFocus(bool focused) |
| { |
| LOGV("postAutoFocus"); |
| mCameraClient->notifyCallback(CAMERA_MSG_FOCUS, (int32_t)focused, 0); |
| } |
| |
| void CameraService::Client::postShutter() |
| { |
| LOGD("postShutter"); |
| mCameraClient->notifyCallback(CAMERA_MSG_SHUTTER, 0, 0); |
| } |
| |
| void CameraService::Client::postRaw(const sp<IMemory>& mem) |
| { |
| LOGD("postRaw"); |
| mCameraClient->dataCallback(CAMERA_MSG_RAW_IMAGE, mem); |
| } |
| |
| void CameraService::Client::postJpeg(const sp<IMemory>& mem) |
| { |
| LOGD("postJpeg"); |
| mCameraClient->dataCallback(CAMERA_MSG_COMPRESSED_IMAGE, mem); |
| } |
| |
| void CameraService::Client::copyFrameAndPostCopiedFrame(sp<IMemoryHeap> heap, size_t offset, size_t size) |
| { |
| LOGV("copyFrameAndPostCopiedFrame"); |
| // It is necessary to copy out of pmem before sending this to |
| // the callback. For efficiency, reuse the same MemoryHeapBase |
| // provided it's big enough. Don't allocate the memory or |
| // perform the copy if there's no callback. |
| if (mPreviewBuffer == 0) { |
| mPreviewBuffer = new MemoryHeapBase(size, 0, NULL); |
| } else if (size > mPreviewBuffer->virtualSize()) { |
| mPreviewBuffer.clear(); |
| mPreviewBuffer = new MemoryHeapBase(size, 0, NULL); |
| if (mPreviewBuffer == 0) { |
| LOGE("failed to allocate space for preview buffer"); |
| return; |
| } |
| } |
| memcpy(mPreviewBuffer->base(), |
| (uint8_t *)heap->base() + offset, size); |
| |
| sp<MemoryBase> frame = new MemoryBase(mPreviewBuffer, 0, size); |
| if (frame == 0) { |
| LOGE("failed to allocate space for frame callback"); |
| return; |
| } |
| mCameraClient->dataCallback(CAMERA_MSG_PREVIEW_FRAME, frame); |
| } |
| |
| void CameraService::Client::postRecordingFrame(const sp<IMemory>& frame) |
| { |
| LOGV("postRecordingFrame"); |
| if (frame == 0) { |
| LOGW("frame is a null pointer"); |
| return; |
| } |
| mCameraClient->dataCallback(CAMERA_MSG_VIDEO_FRAME, frame); |
| } |
| |
| void CameraService::Client::postPreviewFrame(const sp<IMemory>& mem) |
| { |
| LOGV("postPreviewFrame"); |
| if (mem == 0) { |
| LOGW("mem is a null pointer"); |
| return; |
| } |
| |
| ssize_t offset; |
| size_t size; |
| sp<IMemoryHeap> heap = mem->getMemory(&offset, &size); |
| { |
| Mutex::Autolock surfaceLock(mSurfaceLock); |
| if (mSurface != NULL) { |
| mSurface->postBuffer(offset); |
| } |
| } |
| |
| // Is the callback enabled or not? |
| if (!(mPreviewCallbackFlag & FRAME_CALLBACK_FLAG_ENABLE_MASK)) { |
| // If the enable bit is off, the copy-out and one-shot bits are ignored |
| LOGV("frame callback is diabled"); |
| return; |
| } |
| |
| // Is the received frame copied out or not? |
| if (mPreviewCallbackFlag & FRAME_CALLBACK_FLAG_COPY_OUT_MASK) { |
| LOGV("frame is copied out"); |
| copyFrameAndPostCopiedFrame(heap, offset, size); |
| } else { |
| LOGV("frame is directly sent out without copying"); |
| mCameraClient->dataCallback(CAMERA_MSG_PREVIEW_FRAME, mem); |
| } |
| |
| // Is this is one-shot only? |
| if (mPreviewCallbackFlag & FRAME_CALLBACK_FLAG_ONE_SHOT_MASK) { |
| LOGV("One-shot only, thus clear the bits and disable frame callback"); |
| mPreviewCallbackFlag &= ~(FRAME_CALLBACK_FLAG_ONE_SHOT_MASK | |
| FRAME_CALLBACK_FLAG_COPY_OUT_MASK | |
| FRAME_CALLBACK_FLAG_ENABLE_MASK); |
| } |
| } |
| |
| void CameraService::Client::postError(status_t error) |
| { |
| mCameraClient->notifyCallback(CAMERA_MSG_ERROR, error, 0); |
| } |
| |
| status_t CameraService::dump(int fd, const Vector<String16>& args) |
| { |
| const size_t SIZE = 256; |
| char buffer[SIZE]; |
| String8 result; |
| if (checkCallingPermission(String16("android.permission.DUMP")) == false) { |
| snprintf(buffer, SIZE, "Permission Denial: " |
| "can't dump CameraService from pid=%d, uid=%d\n", |
| getCallingPid(), |
| IPCThreadState::self()->getCallingUid()); |
| result.append(buffer); |
| write(fd, result.string(), result.size()); |
| } else { |
| AutoMutex lock(&mLock); |
| if (mClient != 0) { |
| sp<Client> currentClient = mClient.promote(); |
| sprintf(buffer, "Client (%p) PID: %d\n", |
| currentClient->getCameraClient()->asBinder().get(), |
| currentClient->mClientPid); |
| result.append(buffer); |
| write(fd, result.string(), result.size()); |
| currentClient->mHardware->dump(fd, args); |
| } else { |
| result.append("No camera client yet.\n"); |
| write(fd, result.string(), result.size()); |
| } |
| } |
| return NO_ERROR; |
| } |
| |
| |
| #define CHECK_INTERFACE(interface, data, reply) \ |
| do { if (!data.enforceInterface(interface::getInterfaceDescriptor())) { \ |
| LOGW("Call incorrectly routed to " #interface); \ |
| return PERMISSION_DENIED; \ |
| } } while (0) |
| |
| status_t CameraService::onTransact( |
| uint32_t code, const Parcel& data, Parcel* reply, uint32_t flags) |
| { |
| // permission checks... |
| switch (code) { |
| case BnCameraService::CONNECT: |
| IPCThreadState* ipc = IPCThreadState::self(); |
| const int pid = ipc->getCallingPid(); |
| const int self_pid = getpid(); |
| if (pid != self_pid) { |
| // we're called from a different process, do the real check |
| if (!checkCallingPermission( |
| String16("android.permission.CAMERA"))) |
| { |
| const int uid = ipc->getCallingUid(); |
| LOGE("Permission Denial: " |
| "can't use the camera pid=%d, uid=%d", pid, uid); |
| return PERMISSION_DENIED; |
| } |
| } |
| break; |
| } |
| |
| status_t err = BnCameraService::onTransact(code, data, reply, flags); |
| |
| #if DEBUG_HEAP_LEAKS |
| LOGD("+++ onTransact err %d code %d", err, code); |
| |
| if (err == UNKNOWN_TRANSACTION || err == PERMISSION_DENIED) { |
| // the 'service' command interrogates this binder for its name, and then supplies it |
| // even for the debugging commands. that means we need to check for it here, using |
| // ISurfaceComposer (since we delegated the INTERFACE_TRANSACTION handling to |
| // BnSurfaceComposer before falling through to this code). |
| |
| LOGD("+++ onTransact code %d", code); |
| |
| CHECK_INTERFACE(ICameraService, data, reply); |
| |
| switch(code) { |
| case 1000: |
| { |
| if (gWeakHeap != 0) { |
| sp<IMemoryHeap> h = gWeakHeap.promote(); |
| IMemoryHeap *p = gWeakHeap.unsafe_get(); |
| LOGD("CHECKING WEAK REFERENCE %p (%p)", h.get(), p); |
| if (h != 0) |
| h->printRefs(); |
| bool attempt_to_delete = data.readInt32() == 1; |
| if (attempt_to_delete) { |
| // NOT SAFE! |
| LOGD("DELETING WEAK REFERENCE %p (%p)", h.get(), p); |
| if (p) delete p; |
| } |
| return NO_ERROR; |
| } |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| #endif // DEBUG_HEAP_LEAKS |
| |
| return err; |
| } |
| |
| }; // namespace android |