| /* |
| * Copyright (C) 2010 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "OpenGLRenderer" |
| |
| #include <stdlib.h> |
| #include <stdint.h> |
| #include <sys/types.h> |
| |
| #include <SkCanvas.h> |
| #include <SkTypeface.h> |
| |
| #include <utils/Log.h> |
| #include <utils/StopWatch.h> |
| |
| #include <private/hwui/DrawGlInfo.h> |
| |
| #include <ui/Rect.h> |
| |
| #include "OpenGLRenderer.h" |
| #include "DeferredDisplayList.h" |
| #include "DisplayListRenderer.h" |
| #include "Fence.h" |
| #include "PathTessellator.h" |
| #include "Properties.h" |
| #include "ShadowTessellator.h" |
| #include "Vector.h" |
| #include "VertexBuffer.h" |
| |
| namespace android { |
| namespace uirenderer { |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| // Defines |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| #define RAD_TO_DEG (180.0f / 3.14159265f) |
| #define MIN_ANGLE 0.001f |
| |
| #define ALPHA_THRESHOLD 0 |
| |
| static GLenum getFilter(const SkPaint* paint) { |
| if (!paint || paint->getFilterLevel() != SkPaint::kNone_FilterLevel) { |
| return GL_LINEAR; |
| } |
| return GL_NEAREST; |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| // Globals |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| /** |
| * Structure mapping Skia xfermodes to OpenGL blending factors. |
| */ |
| struct Blender { |
| SkXfermode::Mode mode; |
| GLenum src; |
| GLenum dst; |
| }; // struct Blender |
| |
| // In this array, the index of each Blender equals the value of the first |
| // entry. For instance, gBlends[1] == gBlends[SkXfermode::kSrc_Mode] |
| static const Blender gBlends[] = { |
| { SkXfermode::kClear_Mode, GL_ZERO, GL_ONE_MINUS_SRC_ALPHA }, |
| { SkXfermode::kSrc_Mode, GL_ONE, GL_ZERO }, |
| { SkXfermode::kDst_Mode, GL_ZERO, GL_ONE }, |
| { SkXfermode::kSrcOver_Mode, GL_ONE, GL_ONE_MINUS_SRC_ALPHA }, |
| { SkXfermode::kDstOver_Mode, GL_ONE_MINUS_DST_ALPHA, GL_ONE }, |
| { SkXfermode::kSrcIn_Mode, GL_DST_ALPHA, GL_ZERO }, |
| { SkXfermode::kDstIn_Mode, GL_ZERO, GL_SRC_ALPHA }, |
| { SkXfermode::kSrcOut_Mode, GL_ONE_MINUS_DST_ALPHA, GL_ZERO }, |
| { SkXfermode::kDstOut_Mode, GL_ZERO, GL_ONE_MINUS_SRC_ALPHA }, |
| { SkXfermode::kSrcATop_Mode, GL_DST_ALPHA, GL_ONE_MINUS_SRC_ALPHA }, |
| { SkXfermode::kDstATop_Mode, GL_ONE_MINUS_DST_ALPHA, GL_SRC_ALPHA }, |
| { SkXfermode::kXor_Mode, GL_ONE_MINUS_DST_ALPHA, GL_ONE_MINUS_SRC_ALPHA }, |
| { SkXfermode::kPlus_Mode, GL_ONE, GL_ONE }, |
| { SkXfermode::kModulate_Mode, GL_ZERO, GL_SRC_COLOR }, |
| { SkXfermode::kScreen_Mode, GL_ONE, GL_ONE_MINUS_SRC_COLOR } |
| }; |
| |
| // This array contains the swapped version of each SkXfermode. For instance |
| // this array's SrcOver blending mode is actually DstOver. You can refer to |
| // createLayer() for more information on the purpose of this array. |
| static const Blender gBlendsSwap[] = { |
| { SkXfermode::kClear_Mode, GL_ONE_MINUS_DST_ALPHA, GL_ZERO }, |
| { SkXfermode::kSrc_Mode, GL_ZERO, GL_ONE }, |
| { SkXfermode::kDst_Mode, GL_ONE, GL_ZERO }, |
| { SkXfermode::kSrcOver_Mode, GL_ONE_MINUS_DST_ALPHA, GL_ONE }, |
| { SkXfermode::kDstOver_Mode, GL_ONE, GL_ONE_MINUS_SRC_ALPHA }, |
| { SkXfermode::kSrcIn_Mode, GL_ZERO, GL_SRC_ALPHA }, |
| { SkXfermode::kDstIn_Mode, GL_DST_ALPHA, GL_ZERO }, |
| { SkXfermode::kSrcOut_Mode, GL_ZERO, GL_ONE_MINUS_SRC_ALPHA }, |
| { SkXfermode::kDstOut_Mode, GL_ONE_MINUS_DST_ALPHA, GL_ZERO }, |
| { SkXfermode::kSrcATop_Mode, GL_ONE_MINUS_DST_ALPHA, GL_SRC_ALPHA }, |
| { SkXfermode::kDstATop_Mode, GL_DST_ALPHA, GL_ONE_MINUS_SRC_ALPHA }, |
| { SkXfermode::kXor_Mode, GL_ONE_MINUS_DST_ALPHA, GL_ONE_MINUS_SRC_ALPHA }, |
| { SkXfermode::kPlus_Mode, GL_ONE, GL_ONE }, |
| { SkXfermode::kModulate_Mode, GL_DST_COLOR, GL_ZERO }, |
| { SkXfermode::kScreen_Mode, GL_ONE_MINUS_DST_COLOR, GL_ONE } |
| }; |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| // Functions |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| template<typename T> |
| static inline T min(T a, T b) { |
| return a < b ? a : b; |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| // Constructors/destructor |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| OpenGLRenderer::OpenGLRenderer(): |
| mCaches(Caches::getInstance()), mExtensions(Extensions::getInstance()) { |
| // *set* draw modifiers to be 0 |
| memset(&mDrawModifiers, 0, sizeof(mDrawModifiers)); |
| mDrawModifiers.mOverrideLayerAlpha = 1.0f; |
| |
| memcpy(mMeshVertices, gMeshVertices, sizeof(gMeshVertices)); |
| |
| mFrameStarted = false; |
| mCountOverdraw = false; |
| |
| mScissorOptimizationDisabled = false; |
| } |
| |
| OpenGLRenderer::~OpenGLRenderer() { |
| // The context has already been destroyed at this point, do not call |
| // GL APIs. All GL state should be kept in Caches.h |
| } |
| |
| void OpenGLRenderer::initProperties() { |
| char property[PROPERTY_VALUE_MAX]; |
| if (property_get(PROPERTY_DISABLE_SCISSOR_OPTIMIZATION, property, "false")) { |
| mScissorOptimizationDisabled = !strcasecmp(property, "true"); |
| INIT_LOGD(" Scissor optimization %s", |
| mScissorOptimizationDisabled ? "disabled" : "enabled"); |
| } else { |
| INIT_LOGD(" Scissor optimization enabled"); |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| // Setup |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void OpenGLRenderer::setViewport(int width, int height) { |
| initViewport(width, height); |
| |
| glDisable(GL_DITHER); |
| glClearColor(0.0f, 0.0f, 0.0f, 0.0f); |
| |
| glEnableVertexAttribArray(Program::kBindingPosition); |
| } |
| |
| void OpenGLRenderer::initViewport(int width, int height) { |
| mViewProjMatrix.loadOrtho(0, width, height, 0, -1, 1); |
| |
| initializeViewport(width, height); |
| } |
| |
| void OpenGLRenderer::setupFrameState(float left, float top, |
| float right, float bottom, bool opaque) { |
| mCaches.clearGarbage(); |
| |
| initializeSaveStack(left, top, right, bottom); |
| mOpaque = opaque; |
| mTilingClip.set(left, top, right, bottom); |
| } |
| |
| status_t OpenGLRenderer::startFrame() { |
| if (mFrameStarted) return DrawGlInfo::kStatusDone; |
| mFrameStarted = true; |
| |
| mDirtyClip = true; |
| |
| discardFramebuffer(mTilingClip.left, mTilingClip.top, mTilingClip.right, mTilingClip.bottom); |
| |
| glViewport(0, 0, getWidth(), getHeight()); |
| |
| // Functors break the tiling extension in pretty spectacular ways |
| // This ensures we don't use tiling when a functor is going to be |
| // invoked during the frame |
| mSuppressTiling = mCaches.hasRegisteredFunctors(); |
| |
| startTilingCurrentClip(true); |
| |
| debugOverdraw(true, true); |
| |
| return clear(mTilingClip.left, mTilingClip.top, |
| mTilingClip.right, mTilingClip.bottom, mOpaque); |
| } |
| |
| status_t OpenGLRenderer::prepareDirty(float left, float top, |
| float right, float bottom, bool opaque) { |
| |
| setupFrameState(left, top, right, bottom, opaque); |
| |
| // Layer renderers will start the frame immediately |
| // The framebuffer renderer will first defer the display list |
| // for each layer and wait until the first drawing command |
| // to start the frame |
| if (currentSnapshot()->fbo == 0) { |
| syncState(); |
| updateLayers(); |
| } else { |
| return startFrame(); |
| } |
| |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| void OpenGLRenderer::discardFramebuffer(float left, float top, float right, float bottom) { |
| // If we know that we are going to redraw the entire framebuffer, |
| // perform a discard to let the driver know we don't need to preserve |
| // the back buffer for this frame. |
| if (mExtensions.hasDiscardFramebuffer() && |
| left <= 0.0f && top <= 0.0f && right >= getWidth() && bottom >= getHeight()) { |
| const bool isFbo = getTargetFbo() == 0; |
| const GLenum attachments[] = { |
| isFbo ? (const GLenum) GL_COLOR_EXT : (const GLenum) GL_COLOR_ATTACHMENT0, |
| isFbo ? (const GLenum) GL_STENCIL_EXT : (const GLenum) GL_STENCIL_ATTACHMENT }; |
| glDiscardFramebufferEXT(GL_FRAMEBUFFER, 1, attachments); |
| } |
| } |
| |
| status_t OpenGLRenderer::clear(float left, float top, float right, float bottom, bool opaque) { |
| if (!opaque || mCountOverdraw) { |
| mCaches.enableScissor(); |
| mCaches.setScissor(left, currentSnapshot()->height - bottom, right - left, bottom - top); |
| glClear(GL_COLOR_BUFFER_BIT); |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| mCaches.resetScissor(); |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| void OpenGLRenderer::syncState() { |
| if (mCaches.blend) { |
| glEnable(GL_BLEND); |
| } else { |
| glDisable(GL_BLEND); |
| } |
| } |
| |
| void OpenGLRenderer::startTilingCurrentClip(bool opaque) { |
| if (!mSuppressTiling) { |
| const Snapshot* snapshot = currentSnapshot(); |
| |
| const Rect* clip = &mTilingClip; |
| if (snapshot->flags & Snapshot::kFlagFboTarget) { |
| clip = &(snapshot->layer->clipRect); |
| } |
| |
| startTiling(*clip, snapshot->height, opaque); |
| } |
| } |
| |
| void OpenGLRenderer::startTiling(const Rect& clip, int windowHeight, bool opaque) { |
| if (!mSuppressTiling) { |
| mCaches.startTiling(clip.left, windowHeight - clip.bottom, |
| clip.right - clip.left, clip.bottom - clip.top, opaque); |
| } |
| } |
| |
| void OpenGLRenderer::endTiling() { |
| if (!mSuppressTiling) mCaches.endTiling(); |
| } |
| |
| void OpenGLRenderer::finish() { |
| renderOverdraw(); |
| endTiling(); |
| |
| // When finish() is invoked on FBO 0 we've reached the end |
| // of the current frame |
| if (getTargetFbo() == 0) { |
| mCaches.pathCache.trim(); |
| } |
| |
| if (!suppressErrorChecks()) { |
| #if DEBUG_OPENGL |
| GLenum status = GL_NO_ERROR; |
| while ((status = glGetError()) != GL_NO_ERROR) { |
| ALOGD("GL error from OpenGLRenderer: 0x%x", status); |
| switch (status) { |
| case GL_INVALID_ENUM: |
| ALOGE(" GL_INVALID_ENUM"); |
| break; |
| case GL_INVALID_VALUE: |
| ALOGE(" GL_INVALID_VALUE"); |
| break; |
| case GL_INVALID_OPERATION: |
| ALOGE(" GL_INVALID_OPERATION"); |
| break; |
| case GL_OUT_OF_MEMORY: |
| ALOGE(" Out of memory!"); |
| break; |
| } |
| } |
| #endif |
| |
| #if DEBUG_MEMORY_USAGE |
| mCaches.dumpMemoryUsage(); |
| #else |
| if (mCaches.getDebugLevel() & kDebugMemory) { |
| mCaches.dumpMemoryUsage(); |
| } |
| #endif |
| } |
| |
| if (mCountOverdraw) { |
| countOverdraw(); |
| } |
| |
| mFrameStarted = false; |
| } |
| |
| void OpenGLRenderer::interrupt() { |
| if (mCaches.currentProgram) { |
| if (mCaches.currentProgram->isInUse()) { |
| mCaches.currentProgram->remove(); |
| mCaches.currentProgram = NULL; |
| } |
| } |
| mCaches.resetActiveTexture(); |
| mCaches.unbindMeshBuffer(); |
| mCaches.unbindIndicesBuffer(); |
| mCaches.resetVertexPointers(); |
| mCaches.disableTexCoordsVertexArray(); |
| debugOverdraw(false, false); |
| } |
| |
| void OpenGLRenderer::resume() { |
| const Snapshot* snapshot = currentSnapshot(); |
| glViewport(0, 0, snapshot->viewport.getWidth(), snapshot->viewport.getHeight()); |
| glBindFramebuffer(GL_FRAMEBUFFER, snapshot->fbo); |
| debugOverdraw(true, false); |
| |
| glClearColor(0.0f, 0.0f, 0.0f, 0.0f); |
| |
| mCaches.scissorEnabled = glIsEnabled(GL_SCISSOR_TEST); |
| mCaches.enableScissor(); |
| mCaches.resetScissor(); |
| dirtyClip(); |
| |
| mCaches.activeTexture(0); |
| mCaches.resetBoundTextures(); |
| |
| mCaches.blend = true; |
| glEnable(GL_BLEND); |
| glBlendFunc(mCaches.lastSrcMode, mCaches.lastDstMode); |
| glBlendEquation(GL_FUNC_ADD); |
| } |
| |
| void OpenGLRenderer::resumeAfterLayer() { |
| const Snapshot* snapshot = currentSnapshot(); |
| glViewport(0, 0, snapshot->viewport.getWidth(), snapshot->viewport.getHeight()); |
| glBindFramebuffer(GL_FRAMEBUFFER, snapshot->fbo); |
| debugOverdraw(true, false); |
| |
| mCaches.resetScissor(); |
| dirtyClip(); |
| } |
| |
| status_t OpenGLRenderer::callDrawGLFunction(Functor* functor, Rect& dirty) { |
| if (currentSnapshot()->isIgnored()) return DrawGlInfo::kStatusDone; |
| |
| Rect clip(*currentClipRect()); |
| clip.snapToPixelBoundaries(); |
| |
| // Since we don't know what the functor will draw, let's dirty |
| // the entire clip region |
| if (hasLayer()) { |
| dirtyLayerUnchecked(clip, getRegion()); |
| } |
| |
| DrawGlInfo info; |
| info.clipLeft = clip.left; |
| info.clipTop = clip.top; |
| info.clipRight = clip.right; |
| info.clipBottom = clip.bottom; |
| info.isLayer = hasLayer(); |
| info.width = currentSnapshot()->viewport.getWidth(); |
| info.height = currentSnapshot()->height; |
| currentTransform()->copyTo(&info.transform[0]); |
| |
| bool dirtyClip = mDirtyClip; |
| // setup GL state for functor |
| if (mDirtyClip) { |
| setStencilFromClip(); // can issue draws, so must precede enableScissor()/interrupt() |
| } |
| if (mCaches.enableScissor() || dirtyClip) { |
| setScissorFromClip(); |
| } |
| interrupt(); |
| |
| // call functor immediately after GL state setup |
| (*functor)(DrawGlInfo::kModeDraw, &info); |
| |
| resume(); |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| // Debug |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void OpenGLRenderer::eventMark(const char* name) const { |
| mCaches.eventMark(0, name); |
| } |
| |
| void OpenGLRenderer::startMark(const char* name) const { |
| mCaches.startMark(0, name); |
| } |
| |
| void OpenGLRenderer::endMark() const { |
| mCaches.endMark(); |
| } |
| |
| void OpenGLRenderer::debugOverdraw(bool enable, bool clear) { |
| if (mCaches.debugOverdraw && getTargetFbo() == 0) { |
| if (clear) { |
| mCaches.disableScissor(); |
| mCaches.stencil.clear(); |
| } |
| if (enable) { |
| mCaches.stencil.enableDebugWrite(); |
| } else { |
| mCaches.stencil.disable(); |
| } |
| } |
| } |
| |
| void OpenGLRenderer::renderOverdraw() { |
| if (mCaches.debugOverdraw && getTargetFbo() == 0) { |
| const Rect* clip = &mTilingClip; |
| |
| mCaches.enableScissor(); |
| mCaches.setScissor(clip->left, firstSnapshot()->height - clip->bottom, |
| clip->right - clip->left, clip->bottom - clip->top); |
| |
| // 1x overdraw |
| mCaches.stencil.enableDebugTest(2); |
| drawColor(mCaches.getOverdrawColor(1), SkXfermode::kSrcOver_Mode); |
| |
| // 2x overdraw |
| mCaches.stencil.enableDebugTest(3); |
| drawColor(mCaches.getOverdrawColor(2), SkXfermode::kSrcOver_Mode); |
| |
| // 3x overdraw |
| mCaches.stencil.enableDebugTest(4); |
| drawColor(mCaches.getOverdrawColor(3), SkXfermode::kSrcOver_Mode); |
| |
| // 4x overdraw and higher |
| mCaches.stencil.enableDebugTest(4, true); |
| drawColor(mCaches.getOverdrawColor(4), SkXfermode::kSrcOver_Mode); |
| |
| mCaches.stencil.disable(); |
| } |
| } |
| |
| void OpenGLRenderer::countOverdraw() { |
| size_t count = getWidth() * getHeight(); |
| uint32_t* buffer = new uint32_t[count]; |
| glReadPixels(0, 0, getWidth(), getHeight(), GL_RGBA, GL_UNSIGNED_BYTE, &buffer[0]); |
| |
| size_t total = 0; |
| for (size_t i = 0; i < count; i++) { |
| total += buffer[i] & 0xff; |
| } |
| |
| mOverdraw = total / float(count); |
| |
| delete[] buffer; |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| // Layers |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| bool OpenGLRenderer::updateLayer(Layer* layer, bool inFrame) { |
| if (layer->deferredUpdateScheduled && layer->renderer && |
| layer->displayList.get() && layer->displayList->isRenderable()) { |
| ATRACE_CALL(); |
| |
| Rect& dirty = layer->dirtyRect; |
| |
| if (inFrame) { |
| endTiling(); |
| debugOverdraw(false, false); |
| } |
| |
| if (CC_UNLIKELY(inFrame || mCaches.drawDeferDisabled)) { |
| layer->render(); |
| } else { |
| layer->defer(); |
| } |
| |
| if (inFrame) { |
| resumeAfterLayer(); |
| startTilingCurrentClip(); |
| } |
| |
| layer->debugDrawUpdate = mCaches.debugLayersUpdates; |
| layer->hasDrawnSinceUpdate = false; |
| |
| return true; |
| } |
| |
| return false; |
| } |
| |
| void OpenGLRenderer::updateLayers() { |
| // If draw deferring is enabled this method will simply defer |
| // the display list of each individual layer. The layers remain |
| // in the layer updates list which will be cleared by flushLayers(). |
| int count = mLayerUpdates.size(); |
| if (count > 0) { |
| if (CC_UNLIKELY(mCaches.drawDeferDisabled)) { |
| startMark("Layer Updates"); |
| } else { |
| startMark("Defer Layer Updates"); |
| } |
| |
| // Note: it is very important to update the layers in order |
| for (int i = 0; i < count; i++) { |
| Layer* layer = mLayerUpdates.itemAt(i); |
| updateLayer(layer, false); |
| if (CC_UNLIKELY(mCaches.drawDeferDisabled)) { |
| mCaches.resourceCache.decrementRefcount(layer); |
| } |
| } |
| |
| if (CC_UNLIKELY(mCaches.drawDeferDisabled)) { |
| mLayerUpdates.clear(); |
| glBindFramebuffer(GL_FRAMEBUFFER, getTargetFbo()); |
| } |
| endMark(); |
| } |
| } |
| |
| void OpenGLRenderer::flushLayers() { |
| int count = mLayerUpdates.size(); |
| if (count > 0) { |
| startMark("Apply Layer Updates"); |
| char layerName[12]; |
| |
| // Note: it is very important to update the layers in order |
| for (int i = 0; i < count; i++) { |
| sprintf(layerName, "Layer #%d", i); |
| startMark(layerName); |
| |
| ATRACE_BEGIN("flushLayer"); |
| Layer* layer = mLayerUpdates.itemAt(i); |
| layer->flush(); |
| ATRACE_END(); |
| |
| mCaches.resourceCache.decrementRefcount(layer); |
| |
| endMark(); |
| } |
| |
| mLayerUpdates.clear(); |
| glBindFramebuffer(GL_FRAMEBUFFER, getTargetFbo()); |
| |
| endMark(); |
| } |
| } |
| |
| void OpenGLRenderer::pushLayerUpdate(Layer* layer) { |
| if (layer) { |
| // Make sure we don't introduce duplicates. |
| // SortedVector would do this automatically but we need to respect |
| // the insertion order. The linear search is not an issue since |
| // this list is usually very short (typically one item, at most a few) |
| for (int i = mLayerUpdates.size() - 1; i >= 0; i--) { |
| if (mLayerUpdates.itemAt(i) == layer) { |
| return; |
| } |
| } |
| mLayerUpdates.push_back(layer); |
| mCaches.resourceCache.incrementRefcount(layer); |
| } |
| } |
| |
| void OpenGLRenderer::cancelLayerUpdate(Layer* layer) { |
| if (layer) { |
| for (int i = mLayerUpdates.size() - 1; i >= 0; i--) { |
| if (mLayerUpdates.itemAt(i) == layer) { |
| mLayerUpdates.removeAt(i); |
| mCaches.resourceCache.decrementRefcount(layer); |
| break; |
| } |
| } |
| } |
| } |
| |
| void OpenGLRenderer::clearLayerUpdates() { |
| size_t count = mLayerUpdates.size(); |
| if (count > 0) { |
| mCaches.resourceCache.lock(); |
| for (size_t i = 0; i < count; i++) { |
| mCaches.resourceCache.decrementRefcountLocked(mLayerUpdates.itemAt(i)); |
| } |
| mCaches.resourceCache.unlock(); |
| mLayerUpdates.clear(); |
| } |
| } |
| |
| void OpenGLRenderer::flushLayerUpdates() { |
| syncState(); |
| updateLayers(); |
| flushLayers(); |
| // Wait for all the layer updates to be executed |
| AutoFence fence; |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| // State management |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void OpenGLRenderer::onSnapshotRestored(const Snapshot& removed, const Snapshot& restored) { |
| bool restoreOrtho = removed.flags & Snapshot::kFlagDirtyOrtho; |
| bool restoreClip = removed.flags & Snapshot::kFlagClipSet; |
| bool restoreLayer = removed.flags & Snapshot::kFlagIsLayer; |
| |
| if (restoreOrtho) { |
| const Rect& r = restored.viewport; |
| glViewport(r.left, r.top, r.right, r.bottom); |
| mViewProjMatrix.load(removed.orthoMatrix); // TODO: should ortho be stored in 'restored'? |
| } |
| |
| if (restoreClip) { |
| dirtyClip(); |
| } |
| |
| if (restoreLayer) { |
| endMark(); // Savelayer |
| startMark("ComposeLayer"); |
| composeLayer(removed, restored); |
| endMark(); |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| // Layers |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| int OpenGLRenderer::saveLayer(float left, float top, float right, float bottom, |
| const SkPaint* paint, int flags, const SkPath* convexMask) { |
| const int count = saveSnapshot(flags); |
| |
| if (!currentSnapshot()->isIgnored()) { |
| createLayer(left, top, right, bottom, paint, flags, convexMask); |
| } |
| |
| return count; |
| } |
| |
| void OpenGLRenderer::calculateLayerBoundsAndClip(Rect& bounds, Rect& clip, bool fboLayer) { |
| const Rect untransformedBounds(bounds); |
| |
| currentTransform()->mapRect(bounds); |
| |
| // Layers only make sense if they are in the framebuffer's bounds |
| if (bounds.intersect(*currentClipRect())) { |
| // We cannot work with sub-pixels in this case |
| bounds.snapToPixelBoundaries(); |
| |
| // When the layer is not an FBO, we may use glCopyTexImage so we |
| // need to make sure the layer does not extend outside the bounds |
| // of the framebuffer |
| if (!bounds.intersect(currentSnapshot()->previous->viewport)) { |
| bounds.setEmpty(); |
| } else if (fboLayer) { |
| clip.set(bounds); |
| mat4 inverse; |
| inverse.loadInverse(*currentTransform()); |
| inverse.mapRect(clip); |
| clip.snapToPixelBoundaries(); |
| if (clip.intersect(untransformedBounds)) { |
| clip.translate(-untransformedBounds.left, -untransformedBounds.top); |
| bounds.set(untransformedBounds); |
| } else { |
| clip.setEmpty(); |
| } |
| } |
| } else { |
| bounds.setEmpty(); |
| } |
| } |
| |
| void OpenGLRenderer::updateSnapshotIgnoreForLayer(const Rect& bounds, const Rect& clip, |
| bool fboLayer, int alpha) { |
| if (bounds.isEmpty() || bounds.getWidth() > mCaches.maxTextureSize || |
| bounds.getHeight() > mCaches.maxTextureSize || |
| (fboLayer && clip.isEmpty())) { |
| mSnapshot->empty = fboLayer; |
| } else { |
| mSnapshot->invisible = mSnapshot->invisible || (alpha <= ALPHA_THRESHOLD && fboLayer); |
| } |
| } |
| |
| int OpenGLRenderer::saveLayerDeferred(float left, float top, float right, float bottom, |
| const SkPaint* paint, int flags) { |
| const int count = saveSnapshot(flags); |
| |
| if (!currentSnapshot()->isIgnored() && (flags & SkCanvas::kClipToLayer_SaveFlag)) { |
| // initialize the snapshot as though it almost represents an FBO layer so deferred draw |
| // operations will be able to store and restore the current clip and transform info, and |
| // quick rejection will be correct (for display lists) |
| |
| Rect bounds(left, top, right, bottom); |
| Rect clip; |
| calculateLayerBoundsAndClip(bounds, clip, true); |
| updateSnapshotIgnoreForLayer(bounds, clip, true, getAlphaDirect(paint)); |
| |
| if (!currentSnapshot()->isIgnored()) { |
| mSnapshot->resetTransform(-bounds.left, -bounds.top, 0.0f); |
| mSnapshot->resetClip(clip.left, clip.top, clip.right, clip.bottom); |
| mSnapshot->viewport.set(0.0f, 0.0f, bounds.getWidth(), bounds.getHeight()); |
| } |
| } |
| |
| return count; |
| } |
| |
| /** |
| * Layers are viewed by Skia are slightly different than layers in image editing |
| * programs (for instance.) When a layer is created, previously created layers |
| * and the frame buffer still receive every drawing command. For instance, if a |
| * layer is created and a shape intersecting the bounds of the layers and the |
| * framebuffer is draw, the shape will be drawn on both (unless the layer was |
| * created with the SkCanvas::kClipToLayer_SaveFlag flag.) |
| * |
| * A way to implement layers is to create an FBO for each layer, backed by an RGBA |
| * texture. Unfortunately, this is inefficient as it requires every primitive to |
| * be drawn n + 1 times, where n is the number of active layers. In practice this |
| * means, for every primitive: |
| * - Switch active frame buffer |
| * - Change viewport, clip and projection matrix |
| * - Issue the drawing |
| * |
| * Switching rendering target n + 1 times per drawn primitive is extremely costly. |
| * To avoid this, layers are implemented in a different way here, at least in the |
| * general case. FBOs are used, as an optimization, when the "clip to layer" flag |
| * is set. When this flag is set we can redirect all drawing operations into a |
| * single FBO. |
| * |
| * This implementation relies on the frame buffer being at least RGBA 8888. When |
| * a layer is created, only a texture is created, not an FBO. The content of the |
| * frame buffer contained within the layer's bounds is copied into this texture |
| * using glCopyTexImage2D(). The layer's region is then cleared(1) in the frame |
| * buffer and drawing continues as normal. This technique therefore treats the |
| * frame buffer as a scratch buffer for the layers. |
| * |
| * To compose the layers back onto the frame buffer, each layer texture |
| * (containing the original frame buffer data) is drawn as a simple quad over |
| * the frame buffer. The trick is that the quad is set as the composition |
| * destination in the blending equation, and the frame buffer becomes the source |
| * of the composition. |
| * |
| * Drawing layers with an alpha value requires an extra step before composition. |
| * An empty quad is drawn over the layer's region in the frame buffer. This quad |
| * is drawn with the rgba color (0,0,0,alpha). The alpha value offered by the |
| * quad is used to multiply the colors in the frame buffer. This is achieved by |
| * changing the GL blend functions for the GL_FUNC_ADD blend equation to |
| * GL_ZERO, GL_SRC_ALPHA. |
| * |
| * Because glCopyTexImage2D() can be slow, an alternative implementation might |
| * be use to draw a single clipped layer. The implementation described above |
| * is correct in every case. |
| * |
| * (1) The frame buffer is actually not cleared right away. To allow the GPU |
| * to potentially optimize series of calls to glCopyTexImage2D, the frame |
| * buffer is left untouched until the first drawing operation. Only when |
| * something actually gets drawn are the layers regions cleared. |
| */ |
| bool OpenGLRenderer::createLayer(float left, float top, float right, float bottom, |
| const SkPaint* paint, int flags, const SkPath* convexMask) { |
| LAYER_LOGD("Requesting layer %.2fx%.2f", right - left, bottom - top); |
| LAYER_LOGD("Layer cache size = %d", mCaches.layerCache.getSize()); |
| |
| const bool fboLayer = flags & SkCanvas::kClipToLayer_SaveFlag; |
| |
| // Window coordinates of the layer |
| Rect clip; |
| Rect bounds(left, top, right, bottom); |
| calculateLayerBoundsAndClip(bounds, clip, fboLayer); |
| updateSnapshotIgnoreForLayer(bounds, clip, fboLayer, getAlphaDirect(paint)); |
| |
| // Bail out if we won't draw in this snapshot |
| if (currentSnapshot()->isIgnored()) { |
| return false; |
| } |
| |
| mCaches.activeTexture(0); |
| Layer* layer = mCaches.layerCache.get(bounds.getWidth(), bounds.getHeight()); |
| if (!layer) { |
| return false; |
| } |
| |
| layer->setPaint(paint); |
| layer->layer.set(bounds); |
| layer->texCoords.set(0.0f, bounds.getHeight() / float(layer->getHeight()), |
| bounds.getWidth() / float(layer->getWidth()), 0.0f); |
| |
| layer->setBlend(true); |
| layer->setDirty(false); |
| layer->setConvexMask(convexMask); // note: the mask must be cleared before returning to the cache |
| |
| // Save the layer in the snapshot |
| mSnapshot->flags |= Snapshot::kFlagIsLayer; |
| mSnapshot->layer = layer; |
| |
| startMark("SaveLayer"); |
| if (fboLayer) { |
| return createFboLayer(layer, bounds, clip); |
| } else { |
| // Copy the framebuffer into the layer |
| layer->bindTexture(); |
| if (!bounds.isEmpty()) { |
| if (layer->isEmpty()) { |
| // Workaround for some GL drivers. When reading pixels lying outside |
| // of the window we should get undefined values for those pixels. |
| // Unfortunately some drivers will turn the entire target texture black |
| // when reading outside of the window. |
| glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, layer->getWidth(), layer->getHeight(), |
| 0, GL_RGBA, GL_UNSIGNED_BYTE, NULL); |
| layer->setEmpty(false); |
| } |
| |
| glCopyTexSubImage2D(GL_TEXTURE_2D, 0, 0, 0, bounds.left, |
| mSnapshot->height - bounds.bottom, bounds.getWidth(), bounds.getHeight()); |
| |
| // Enqueue the buffer coordinates to clear the corresponding region later |
| mLayers.push(new Rect(bounds)); |
| } |
| } |
| |
| return true; |
| } |
| |
| bool OpenGLRenderer::createFboLayer(Layer* layer, Rect& bounds, Rect& clip) { |
| layer->clipRect.set(clip); |
| layer->setFbo(mCaches.fboCache.get()); |
| |
| mSnapshot->region = &mSnapshot->layer->region; |
| mSnapshot->flags |= Snapshot::kFlagFboTarget | Snapshot::kFlagIsFboLayer | |
| Snapshot::kFlagDirtyOrtho; |
| mSnapshot->fbo = layer->getFbo(); |
| mSnapshot->resetTransform(-bounds.left, -bounds.top, 0.0f); |
| mSnapshot->resetClip(clip.left, clip.top, clip.right, clip.bottom); |
| mSnapshot->viewport.set(0.0f, 0.0f, bounds.getWidth(), bounds.getHeight()); |
| mSnapshot->height = bounds.getHeight(); |
| mSnapshot->orthoMatrix.load(mViewProjMatrix); |
| |
| endTiling(); |
| debugOverdraw(false, false); |
| // Bind texture to FBO |
| glBindFramebuffer(GL_FRAMEBUFFER, layer->getFbo()); |
| layer->bindTexture(); |
| |
| // Initialize the texture if needed |
| if (layer->isEmpty()) { |
| layer->allocateTexture(); |
| layer->setEmpty(false); |
| } |
| |
| glFramebufferTexture2D(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0, GL_TEXTURE_2D, |
| layer->getTexture(), 0); |
| |
| startTilingCurrentClip(true); |
| |
| // Clear the FBO, expand the clear region by 1 to get nice bilinear filtering |
| mCaches.enableScissor(); |
| mCaches.setScissor(clip.left - 1.0f, bounds.getHeight() - clip.bottom - 1.0f, |
| clip.getWidth() + 2.0f, clip.getHeight() + 2.0f); |
| glClear(GL_COLOR_BUFFER_BIT); |
| |
| dirtyClip(); |
| |
| // Change the ortho projection |
| glViewport(0, 0, bounds.getWidth(), bounds.getHeight()); |
| |
| // TODO: determine best way to support 3d drawing within HW layers |
| mViewProjMatrix.loadOrtho(0.0f, bounds.getWidth(), bounds.getHeight(), 0.0f, -1.0f, 1.0f); |
| |
| return true; |
| } |
| |
| /** |
| * Read the documentation of createLayer() before doing anything in this method. |
| */ |
| void OpenGLRenderer::composeLayer(const Snapshot& removed, const Snapshot& restored) { |
| if (!removed.layer) { |
| ALOGE("Attempting to compose a layer that does not exist"); |
| return; |
| } |
| |
| Layer* layer = removed.layer; |
| const Rect& rect = layer->layer; |
| const bool fboLayer = removed.flags & Snapshot::kFlagIsFboLayer; |
| |
| bool clipRequired = false; |
| calculateQuickRejectForScissor(rect.left, rect.top, rect.right, rect.bottom, |
| &clipRequired, false); // safely ignore return, should never be rejected |
| mCaches.setScissorEnabled(mScissorOptimizationDisabled || clipRequired); |
| |
| if (fboLayer) { |
| endTiling(); |
| |
| // Detach the texture from the FBO |
| glFramebufferTexture2D(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0, GL_TEXTURE_2D, 0, 0); |
| |
| layer->removeFbo(false); |
| |
| // Unbind current FBO and restore previous one |
| glBindFramebuffer(GL_FRAMEBUFFER, restored.fbo); |
| debugOverdraw(true, false); |
| |
| startTilingCurrentClip(); |
| } |
| |
| if (!fboLayer && layer->getAlpha() < 255) { |
| SkPaint layerPaint; |
| layerPaint.setAlpha(layer->getAlpha()); |
| layerPaint.setXfermodeMode(SkXfermode::kDstIn_Mode); |
| layerPaint.setColorFilter(layer->getColorFilter()); |
| |
| drawColorRect(rect.left, rect.top, rect.right, rect.bottom, &layerPaint, true); |
| // Required below, composeLayerRect() will divide by 255 |
| layer->setAlpha(255); |
| } |
| |
| mCaches.unbindMeshBuffer(); |
| |
| mCaches.activeTexture(0); |
| |
| // When the layer is stored in an FBO, we can save a bit of fillrate by |
| // drawing only the dirty region |
| if (fboLayer) { |
| dirtyLayer(rect.left, rect.top, rect.right, rect.bottom, *restored.transform); |
| composeLayerRegion(layer, rect); |
| } else if (!rect.isEmpty()) { |
| dirtyLayer(rect.left, rect.top, rect.right, rect.bottom); |
| |
| save(0); |
| // the layer contains screen buffer content that shouldn't be alpha modulated |
| // (and any necessary alpha modulation was handled drawing into the layer) |
| mSnapshot->alpha = 1.0f; |
| composeLayerRect(layer, rect, true); |
| restore(); |
| } |
| |
| dirtyClip(); |
| |
| // Failing to add the layer to the cache should happen only if the layer is too large |
| layer->setConvexMask(NULL); |
| if (!mCaches.layerCache.put(layer)) { |
| LAYER_LOGD("Deleting layer"); |
| Caches::getInstance().resourceCache.decrementRefcount(layer); |
| } |
| } |
| |
| void OpenGLRenderer::drawTextureLayer(Layer* layer, const Rect& rect) { |
| float alpha = getLayerAlpha(layer); |
| |
| setupDraw(); |
| if (layer->getRenderTarget() == GL_TEXTURE_2D) { |
| setupDrawWithTexture(); |
| } else { |
| setupDrawWithExternalTexture(); |
| } |
| setupDrawTextureTransform(); |
| setupDrawColor(alpha, alpha, alpha, alpha); |
| setupDrawColorFilter(layer->getColorFilter()); |
| setupDrawBlending(layer); |
| setupDrawProgram(); |
| setupDrawPureColorUniforms(); |
| setupDrawColorFilterUniforms(layer->getColorFilter()); |
| if (layer->getRenderTarget() == GL_TEXTURE_2D) { |
| setupDrawTexture(layer->getTexture()); |
| } else { |
| setupDrawExternalTexture(layer->getTexture()); |
| } |
| if (currentTransform()->isPureTranslate() && |
| !layer->getForceFilter() && |
| layer->getWidth() == (uint32_t) rect.getWidth() && |
| layer->getHeight() == (uint32_t) rect.getHeight()) { |
| const float x = (int) floorf(rect.left + currentTransform()->getTranslateX() + 0.5f); |
| const float y = (int) floorf(rect.top + currentTransform()->getTranslateY() + 0.5f); |
| |
| layer->setFilter(GL_NEAREST); |
| setupDrawModelView(kModelViewMode_TranslateAndScale, false, |
| x, y, x + rect.getWidth(), y + rect.getHeight(), true); |
| } else { |
| layer->setFilter(GL_LINEAR); |
| setupDrawModelView(kModelViewMode_TranslateAndScale, false, |
| rect.left, rect.top, rect.right, rect.bottom); |
| } |
| setupDrawTextureTransformUniforms(layer->getTexTransform()); |
| setupDrawMesh(&mMeshVertices[0].x, &mMeshVertices[0].u); |
| |
| glDrawArrays(GL_TRIANGLE_STRIP, 0, gMeshCount); |
| } |
| |
| void OpenGLRenderer::composeLayerRect(Layer* layer, const Rect& rect, bool swap) { |
| if (!layer->isTextureLayer()) { |
| const Rect& texCoords = layer->texCoords; |
| resetDrawTextureTexCoords(texCoords.left, texCoords.top, |
| texCoords.right, texCoords.bottom); |
| |
| float x = rect.left; |
| float y = rect.top; |
| bool simpleTransform = currentTransform()->isPureTranslate() && |
| layer->getWidth() == (uint32_t) rect.getWidth() && |
| layer->getHeight() == (uint32_t) rect.getHeight(); |
| |
| if (simpleTransform) { |
| // When we're swapping, the layer is already in screen coordinates |
| if (!swap) { |
| x = (int) floorf(rect.left + currentTransform()->getTranslateX() + 0.5f); |
| y = (int) floorf(rect.top + currentTransform()->getTranslateY() + 0.5f); |
| } |
| |
| layer->setFilter(GL_NEAREST, true); |
| } else { |
| layer->setFilter(GL_LINEAR, true); |
| } |
| |
| SkPaint layerPaint; |
| layerPaint.setAlpha(getLayerAlpha(layer) * 255); |
| layerPaint.setXfermodeMode(layer->getMode()); |
| layerPaint.setColorFilter(layer->getColorFilter()); |
| |
| bool blend = layer->isBlend() || getLayerAlpha(layer) < 1.0f; |
| drawTextureMesh(x, y, x + rect.getWidth(), y + rect.getHeight(), |
| layer->getTexture(), &layerPaint, blend, |
| &mMeshVertices[0].x, &mMeshVertices[0].u, |
| GL_TRIANGLE_STRIP, gMeshCount, swap, swap || simpleTransform); |
| |
| resetDrawTextureTexCoords(0.0f, 0.0f, 1.0f, 1.0f); |
| } else { |
| resetDrawTextureTexCoords(0.0f, 1.0f, 1.0f, 0.0f); |
| drawTextureLayer(layer, rect); |
| resetDrawTextureTexCoords(0.0f, 0.0f, 1.0f, 1.0f); |
| } |
| } |
| |
| /** |
| * Issues the command X, and if we're composing a save layer to the fbo or drawing a newly updated |
| * hardware layer with overdraw debug on, draws again to the stencil only, so that these draw |
| * operations are correctly counted twice for overdraw. NOTE: assumes composeLayerRegion only used |
| * by saveLayer's restore |
| */ |
| #define DRAW_DOUBLE_STENCIL_IF(COND, DRAW_COMMAND) { \ |
| DRAW_COMMAND; \ |
| if (CC_UNLIKELY(mCaches.debugOverdraw && getTargetFbo() == 0 && COND)) { \ |
| glColorMask(GL_FALSE, GL_FALSE, GL_FALSE, GL_FALSE); \ |
| DRAW_COMMAND; \ |
| glColorMask(GL_TRUE, GL_TRUE, GL_TRUE, GL_TRUE); \ |
| } \ |
| } |
| |
| #define DRAW_DOUBLE_STENCIL(DRAW_COMMAND) DRAW_DOUBLE_STENCIL_IF(true, DRAW_COMMAND) |
| |
| void OpenGLRenderer::composeLayerRegion(Layer* layer, const Rect& rect) { |
| if (CC_UNLIKELY(layer->region.isEmpty())) return; // nothing to draw |
| |
| if (layer->getConvexMask()) { |
| save(SkCanvas::kClip_SaveFlag | SkCanvas::kMatrix_SaveFlag); |
| |
| // clip to the area of the layer the mask can be larger |
| clipRect(rect.left, rect.top, rect.right, rect.bottom, SkRegion::kIntersect_Op); |
| |
| SkPaint paint; |
| paint.setAntiAlias(true); |
| paint.setColor(SkColorSetARGB(int(getLayerAlpha(layer) * 255), 0, 0, 0)); |
| |
| SkiaShader* oldShader = mDrawModifiers.mShader; |
| |
| // create LayerShader to map SaveLayer content into subsequent draw |
| SkMatrix shaderMatrix; |
| shaderMatrix.setTranslate(rect.left, rect.bottom); |
| shaderMatrix.preScale(1, -1); |
| SkiaLayerShader layerShader(layer, &shaderMatrix); |
| mDrawModifiers.mShader = &layerShader; |
| |
| // Since the drawing primitive is defined in local drawing space, |
| // we don't need to modify the draw matrix |
| const SkPath* maskPath = layer->getConvexMask(); |
| DRAW_DOUBLE_STENCIL(drawConvexPath(*maskPath, &paint)); |
| |
| mDrawModifiers.mShader = oldShader; |
| restore(); |
| |
| return; |
| } |
| |
| if (layer->region.isRect()) { |
| layer->setRegionAsRect(); |
| |
| DRAW_DOUBLE_STENCIL(composeLayerRect(layer, layer->regionRect)); |
| |
| layer->region.clear(); |
| return; |
| } |
| |
| // standard Region based draw |
| size_t count; |
| const android::Rect* rects; |
| Region safeRegion; |
| if (CC_LIKELY(hasRectToRectTransform())) { |
| rects = layer->region.getArray(&count); |
| } else { |
| safeRegion = Region::createTJunctionFreeRegion(layer->region); |
| rects = safeRegion.getArray(&count); |
| } |
| |
| const float alpha = getLayerAlpha(layer); |
| const float texX = 1.0f / float(layer->getWidth()); |
| const float texY = 1.0f / float(layer->getHeight()); |
| const float height = rect.getHeight(); |
| |
| setupDraw(); |
| |
| // We must get (and therefore bind) the region mesh buffer |
| // after we setup drawing in case we need to mess with the |
| // stencil buffer in setupDraw() |
| TextureVertex* mesh = mCaches.getRegionMesh(); |
| uint32_t numQuads = 0; |
| |
| setupDrawWithTexture(); |
| setupDrawColor(alpha, alpha, alpha, alpha); |
| setupDrawColorFilter(layer->getColorFilter()); |
| setupDrawBlending(layer); |
| setupDrawProgram(); |
| setupDrawDirtyRegionsDisabled(); |
| setupDrawPureColorUniforms(); |
| setupDrawColorFilterUniforms(layer->getColorFilter()); |
| setupDrawTexture(layer->getTexture()); |
| if (currentTransform()->isPureTranslate()) { |
| const float x = (int) floorf(rect.left + currentTransform()->getTranslateX() + 0.5f); |
| const float y = (int) floorf(rect.top + currentTransform()->getTranslateY() + 0.5f); |
| |
| layer->setFilter(GL_NEAREST); |
| setupDrawModelView(kModelViewMode_Translate, false, |
| x, y, x + rect.getWidth(), y + rect.getHeight(), true); |
| } else { |
| layer->setFilter(GL_LINEAR); |
| setupDrawModelView(kModelViewMode_Translate, false, |
| rect.left, rect.top, rect.right, rect.bottom); |
| } |
| setupDrawMeshIndices(&mesh[0].x, &mesh[0].u); |
| |
| for (size_t i = 0; i < count; i++) { |
| const android::Rect* r = &rects[i]; |
| |
| const float u1 = r->left * texX; |
| const float v1 = (height - r->top) * texY; |
| const float u2 = r->right * texX; |
| const float v2 = (height - r->bottom) * texY; |
| |
| // TODO: Reject quads outside of the clip |
| TextureVertex::set(mesh++, r->left, r->top, u1, v1); |
| TextureVertex::set(mesh++, r->right, r->top, u2, v1); |
| TextureVertex::set(mesh++, r->left, r->bottom, u1, v2); |
| TextureVertex::set(mesh++, r->right, r->bottom, u2, v2); |
| |
| numQuads++; |
| |
| if (numQuads >= gMaxNumberOfQuads) { |
| DRAW_DOUBLE_STENCIL(glDrawElements(GL_TRIANGLES, numQuads * 6, |
| GL_UNSIGNED_SHORT, NULL)); |
| numQuads = 0; |
| mesh = mCaches.getRegionMesh(); |
| } |
| } |
| |
| if (numQuads > 0) { |
| DRAW_DOUBLE_STENCIL(glDrawElements(GL_TRIANGLES, numQuads * 6, |
| GL_UNSIGNED_SHORT, NULL)); |
| } |
| |
| #if DEBUG_LAYERS_AS_REGIONS |
| drawRegionRectsDebug(layer->region); |
| #endif |
| |
| layer->region.clear(); |
| } |
| |
| #if DEBUG_LAYERS_AS_REGIONS |
| void OpenGLRenderer::drawRegionRectsDebug(const Region& region) { |
| size_t count; |
| const android::Rect* rects = region.getArray(&count); |
| |
| uint32_t colors[] = { |
| 0x7fff0000, 0x7f00ff00, |
| 0x7f0000ff, 0x7fff00ff, |
| }; |
| |
| int offset = 0; |
| int32_t top = rects[0].top; |
| |
| for (size_t i = 0; i < count; i++) { |
| if (top != rects[i].top) { |
| offset ^= 0x2; |
| top = rects[i].top; |
| } |
| |
| SkPaint paint; |
| paint.setColor(colors[offset + (i & 0x1)]); |
| Rect r(rects[i].left, rects[i].top, rects[i].right, rects[i].bottom); |
| drawColorRect(r.left, r.top, r.right, r.bottom, paint); |
| } |
| } |
| #endif |
| |
| void OpenGLRenderer::drawRegionRects(const SkRegion& region, const SkPaint& paint, bool dirty) { |
| Vector<float> rects; |
| |
| SkRegion::Iterator it(region); |
| while (!it.done()) { |
| const SkIRect& r = it.rect(); |
| rects.push(r.fLeft); |
| rects.push(r.fTop); |
| rects.push(r.fRight); |
| rects.push(r.fBottom); |
| it.next(); |
| } |
| |
| drawColorRects(rects.array(), rects.size(), &paint, true, dirty, false); |
| } |
| |
| void OpenGLRenderer::dirtyLayer(const float left, const float top, |
| const float right, const float bottom, const mat4 transform) { |
| if (hasLayer()) { |
| Rect bounds(left, top, right, bottom); |
| transform.mapRect(bounds); |
| dirtyLayerUnchecked(bounds, getRegion()); |
| } |
| } |
| |
| void OpenGLRenderer::dirtyLayer(const float left, const float top, |
| const float right, const float bottom) { |
| if (hasLayer()) { |
| Rect bounds(left, top, right, bottom); |
| dirtyLayerUnchecked(bounds, getRegion()); |
| } |
| } |
| |
| void OpenGLRenderer::dirtyLayerUnchecked(Rect& bounds, Region* region) { |
| if (bounds.intersect(*currentClipRect())) { |
| bounds.snapToPixelBoundaries(); |
| android::Rect dirty(bounds.left, bounds.top, bounds.right, bounds.bottom); |
| if (!dirty.isEmpty()) { |
| region->orSelf(dirty); |
| } |
| } |
| } |
| |
| void OpenGLRenderer::issueIndexedQuadDraw(Vertex* mesh, GLsizei quadsCount) { |
| GLsizei elementsCount = quadsCount * 6; |
| while (elementsCount > 0) { |
| GLsizei drawCount = min(elementsCount, (GLsizei) gMaxNumberOfQuads * 6); |
| |
| setupDrawIndexedVertices(&mesh[0].x); |
| glDrawElements(GL_TRIANGLES, drawCount, GL_UNSIGNED_SHORT, NULL); |
| |
| elementsCount -= drawCount; |
| // Though there are 4 vertices in a quad, we use 6 indices per |
| // quad to draw with GL_TRIANGLES |
| mesh += (drawCount / 6) * 4; |
| } |
| } |
| |
| void OpenGLRenderer::clearLayerRegions() { |
| const size_t count = mLayers.size(); |
| if (count == 0) return; |
| |
| if (!currentSnapshot()->isIgnored()) { |
| // Doing several glScissor/glClear here can negatively impact |
| // GPUs with a tiler architecture, instead we draw quads with |
| // the Clear blending mode |
| |
| // The list contains bounds that have already been clipped |
| // against their initial clip rect, and the current clip |
| // is likely different so we need to disable clipping here |
| bool scissorChanged = mCaches.disableScissor(); |
| |
| Vertex mesh[count * 4]; |
| Vertex* vertex = mesh; |
| |
| for (uint32_t i = 0; i < count; i++) { |
| Rect* bounds = mLayers.itemAt(i); |
| |
| Vertex::set(vertex++, bounds->left, bounds->top); |
| Vertex::set(vertex++, bounds->right, bounds->top); |
| Vertex::set(vertex++, bounds->left, bounds->bottom); |
| Vertex::set(vertex++, bounds->right, bounds->bottom); |
| |
| delete bounds; |
| } |
| // We must clear the list of dirty rects before we |
| // call setupDraw() to prevent stencil setup to do |
| // the same thing again |
| mLayers.clear(); |
| |
| SkPaint clearPaint; |
| clearPaint.setXfermodeMode(SkXfermode::kClear_Mode); |
| |
| setupDraw(false); |
| setupDrawColor(0.0f, 0.0f, 0.0f, 1.0f); |
| setupDrawBlending(&clearPaint, true); |
| setupDrawProgram(); |
| setupDrawPureColorUniforms(); |
| setupDrawModelView(kModelViewMode_Translate, false, |
| 0.0f, 0.0f, 0.0f, 0.0f, true); |
| |
| issueIndexedQuadDraw(&mesh[0], count); |
| |
| if (scissorChanged) mCaches.enableScissor(); |
| } else { |
| for (uint32_t i = 0; i < count; i++) { |
| delete mLayers.itemAt(i); |
| } |
| mLayers.clear(); |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| // State Deferral |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| bool OpenGLRenderer::storeDisplayState(DeferredDisplayState& state, int stateDeferFlags) { |
| const Rect* currentClip = currentClipRect(); |
| const mat4* currentMatrix = currentTransform(); |
| |
| if (stateDeferFlags & kStateDeferFlag_Draw) { |
| // state has bounds initialized in local coordinates |
| if (!state.mBounds.isEmpty()) { |
| currentMatrix->mapRect(state.mBounds); |
| Rect clippedBounds(state.mBounds); |
| // NOTE: if we ever want to use this clipping info to drive whether the scissor |
| // is used, it should more closely duplicate the quickReject logic (in how it uses |
| // snapToPixelBoundaries) |
| |
| if(!clippedBounds.intersect(*currentClip)) { |
| // quick rejected |
| return true; |
| } |
| |
| state.mClipSideFlags = kClipSide_None; |
| if (!currentClip->contains(state.mBounds)) { |
| int& flags = state.mClipSideFlags; |
| // op partially clipped, so record which sides are clipped for clip-aware merging |
| if (currentClip->left > state.mBounds.left) flags |= kClipSide_Left; |
| if (currentClip->top > state.mBounds.top) flags |= kClipSide_Top; |
| if (currentClip->right < state.mBounds.right) flags |= kClipSide_Right; |
| if (currentClip->bottom < state.mBounds.bottom) flags |= kClipSide_Bottom; |
| } |
| state.mBounds.set(clippedBounds); |
| } else { |
| // Empty bounds implies size unknown. Label op as conservatively clipped to disable |
| // overdraw avoidance (since we don't know what it overlaps) |
| state.mClipSideFlags = kClipSide_ConservativeFull; |
| state.mBounds.set(*currentClip); |
| } |
| } |
| |
| state.mClipValid = (stateDeferFlags & kStateDeferFlag_Clip); |
| if (state.mClipValid) { |
| state.mClip.set(*currentClip); |
| } |
| |
| // Transform, drawModifiers, and alpha always deferred, since they are used by state operations |
| // (Note: saveLayer/restore use colorFilter and alpha, so we just save restore everything) |
| state.mMatrix.load(*currentMatrix); |
| state.mDrawModifiers = mDrawModifiers; |
| state.mAlpha = currentSnapshot()->alpha; |
| return false; |
| } |
| |
| void OpenGLRenderer::restoreDisplayState(const DeferredDisplayState& state, bool skipClipRestore) { |
| setMatrix(state.mMatrix); |
| mSnapshot->alpha = state.mAlpha; |
| mDrawModifiers = state.mDrawModifiers; |
| |
| if (state.mClipValid && !skipClipRestore) { |
| mSnapshot->setClip(state.mClip.left, state.mClip.top, |
| state.mClip.right, state.mClip.bottom); |
| dirtyClip(); |
| } |
| } |
| |
| /** |
| * Merged multidraw (such as in drawText and drawBitmaps rely on the fact that no clipping is done |
| * in the draw path. Instead, clipping is done ahead of time - either as a single clip rect (when at |
| * least one op is clipped), or disabled entirely (because no merged op is clipped) |
| * |
| * This method should be called when restoreDisplayState() won't be restoring the clip |
| */ |
| void OpenGLRenderer::setupMergedMultiDraw(const Rect* clipRect) { |
| if (clipRect != NULL) { |
| mSnapshot->setClip(clipRect->left, clipRect->top, clipRect->right, clipRect->bottom); |
| } else { |
| mSnapshot->setClip(0, 0, getWidth(), getHeight()); |
| } |
| dirtyClip(); |
| mCaches.setScissorEnabled(clipRect != NULL || mScissorOptimizationDisabled); |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| // Clipping |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void OpenGLRenderer::setScissorFromClip() { |
| Rect clip(*currentClipRect()); |
| clip.snapToPixelBoundaries(); |
| |
| if (mCaches.setScissor(clip.left, currentSnapshot()->height - clip.bottom, |
| clip.getWidth(), clip.getHeight())) { |
| mDirtyClip = false; |
| } |
| } |
| |
| void OpenGLRenderer::ensureStencilBuffer() { |
| // Thanks to the mismatch between EGL and OpenGL ES FBO we |
| // cannot attach a stencil buffer to fbo0 dynamically. Let's |
| // just hope we have one when hasLayer() returns false. |
| if (hasLayer()) { |
| attachStencilBufferToLayer(currentSnapshot()->layer); |
| } |
| } |
| |
| void OpenGLRenderer::attachStencilBufferToLayer(Layer* layer) { |
| // The layer's FBO is already bound when we reach this stage |
| if (!layer->getStencilRenderBuffer()) { |
| // GL_QCOM_tiled_rendering doesn't like it if a renderbuffer |
| // is attached after we initiated tiling. We must turn it off, |
| // attach the new render buffer then turn tiling back on |
| endTiling(); |
| |
| RenderBuffer* buffer = mCaches.renderBufferCache.get( |
| Stencil::getSmallestStencilFormat(), layer->getWidth(), layer->getHeight()); |
| layer->setStencilRenderBuffer(buffer); |
| |
| startTiling(layer->clipRect, layer->layer.getHeight()); |
| } |
| } |
| |
| void OpenGLRenderer::setStencilFromClip() { |
| if (!mCaches.debugOverdraw) { |
| if (!currentSnapshot()->clipRegion->isEmpty()) { |
| // NOTE: The order here is important, we must set dirtyClip to false |
| // before any draw call to avoid calling back into this method |
| mDirtyClip = false; |
| |
| ensureStencilBuffer(); |
| |
| mCaches.stencil.enableWrite(); |
| |
| // Clear the stencil but first make sure we restrict drawing |
| // to the region's bounds |
| bool resetScissor = mCaches.enableScissor(); |
| if (resetScissor) { |
| // The scissor was not set so we now need to update it |
| setScissorFromClip(); |
| } |
| mCaches.stencil.clear(); |
| if (resetScissor) mCaches.disableScissor(); |
| |
| SkPaint paint; |
| paint.setColor(0xff000000); |
| paint.setXfermodeMode(SkXfermode::kSrc_Mode); |
| |
| // NOTE: We could use the region contour path to generate a smaller mesh |
| // Since we are using the stencil we could use the red book path |
| // drawing technique. It might increase bandwidth usage though. |
| |
| // The last parameter is important: we are not drawing in the color buffer |
| // so we don't want to dirty the current layer, if any |
| drawRegionRects(*(currentSnapshot()->clipRegion), paint, false); |
| |
| mCaches.stencil.enableTest(); |
| |
| // Draw the region used to generate the stencil if the appropriate debug |
| // mode is enabled |
| if (mCaches.debugStencilClip == Caches::kStencilShowRegion) { |
| paint.setColor(0x7f0000ff); |
| paint.setXfermodeMode(SkXfermode::kSrcOver_Mode); |
| drawRegionRects(*(currentSnapshot()->clipRegion), paint); |
| } |
| } else { |
| mCaches.stencil.disable(); |
| } |
| } |
| } |
| |
| /** |
| * Returns false and sets scissor enable based upon bounds if drawing won't be clipped out. |
| * |
| * @param paint if not null, the bounds will be expanded to account for stroke depending on paint |
| * style, and tessellated AA ramp |
| */ |
| bool OpenGLRenderer::quickRejectSetupScissor(float left, float top, float right, float bottom, |
| const SkPaint* paint) { |
| bool clipRequired = false; |
| bool snapOut = paint && paint->isAntiAlias(); |
| |
| if (paint && paint->getStyle() != SkPaint::kFill_Style) { |
| float outset = paint->getStrokeWidth() * 0.5f; |
| left -= outset; |
| top -= outset; |
| right += outset; |
| bottom += outset; |
| } |
| |
| if (calculateQuickRejectForScissor(left, top, right, bottom, &clipRequired, snapOut)) { |
| return true; |
| } |
| |
| if (!isRecording()) { |
| // not quick rejected, so enable the scissor if clipRequired |
| mCaches.setScissorEnabled(mScissorOptimizationDisabled || clipRequired); |
| } |
| return false; |
| } |
| |
| void OpenGLRenderer::debugClip() { |
| #if DEBUG_CLIP_REGIONS |
| if (!isRecording() && !currentSnapshot()->clipRegion->isEmpty()) { |
| SkPaint paint; |
| paint.setColor(0x7f00ff00); |
| drawRegionRects(*(currentSnapshot()->clipRegion, paint); |
| |
| } |
| #endif |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| // Drawing commands |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void OpenGLRenderer::setupDraw(bool clear) { |
| // TODO: It would be best if we could do this before quickRejectSetupScissor() |
| // changes the scissor test state |
| if (clear) clearLayerRegions(); |
| // Make sure setScissor & setStencil happen at the beginning of |
| // this method |
| if (mDirtyClip) { |
| if (mCaches.scissorEnabled) { |
| setScissorFromClip(); |
| } |
| setStencilFromClip(); |
| } |
| |
| mDescription.reset(); |
| |
| mSetShaderColor = false; |
| mColorSet = false; |
| mColorA = mColorR = mColorG = mColorB = 0.0f; |
| mTextureUnit = 0; |
| mTrackDirtyRegions = true; |
| |
| // Enable debug highlight when what we're about to draw is tested against |
| // the stencil buffer and if stencil highlight debugging is on |
| mDescription.hasDebugHighlight = !mCaches.debugOverdraw && |
| mCaches.debugStencilClip == Caches::kStencilShowHighlight && |
| mCaches.stencil.isTestEnabled(); |
| |
| mDescription.emulateStencil = mCountOverdraw; |
| } |
| |
| void OpenGLRenderer::setupDrawWithTexture(bool isAlpha8) { |
| mDescription.hasTexture = true; |
| mDescription.hasAlpha8Texture = isAlpha8; |
| } |
| |
| void OpenGLRenderer::setupDrawWithTextureAndColor(bool isAlpha8) { |
| mDescription.hasTexture = true; |
| mDescription.hasColors = true; |
| mDescription.hasAlpha8Texture = isAlpha8; |
| } |
| |
| void OpenGLRenderer::setupDrawWithExternalTexture() { |
| mDescription.hasExternalTexture = true; |
| } |
| |
| void OpenGLRenderer::setupDrawNoTexture() { |
| mCaches.disableTexCoordsVertexArray(); |
| } |
| |
| void OpenGLRenderer::setupDrawAA() { |
| mDescription.isAA = true; |
| } |
| |
| void OpenGLRenderer::setupDrawColor(int color, int alpha) { |
| mColorA = alpha / 255.0f; |
| mColorR = mColorA * ((color >> 16) & 0xFF) / 255.0f; |
| mColorG = mColorA * ((color >> 8) & 0xFF) / 255.0f; |
| mColorB = mColorA * ((color ) & 0xFF) / 255.0f; |
| mColorSet = true; |
| mSetShaderColor = mDescription.setColorModulate(mColorA); |
| } |
| |
| void OpenGLRenderer::setupDrawAlpha8Color(int color, int alpha) { |
| mColorA = alpha / 255.0f; |
| mColorR = mColorA * ((color >> 16) & 0xFF) / 255.0f; |
| mColorG = mColorA * ((color >> 8) & 0xFF) / 255.0f; |
| mColorB = mColorA * ((color ) & 0xFF) / 255.0f; |
| mColorSet = true; |
| mSetShaderColor = mDescription.setAlpha8ColorModulate(mColorR, mColorG, mColorB, mColorA); |
| } |
| |
| void OpenGLRenderer::setupDrawTextGamma(const SkPaint* paint) { |
| mCaches.fontRenderer->describe(mDescription, paint); |
| } |
| |
| void OpenGLRenderer::setupDrawColor(float r, float g, float b, float a) { |
| mColorA = a; |
| mColorR = r; |
| mColorG = g; |
| mColorB = b; |
| mColorSet = true; |
| mSetShaderColor = mDescription.setColorModulate(a); |
| } |
| |
| void OpenGLRenderer::setupDrawShader() { |
| if (mDrawModifiers.mShader) { |
| mDrawModifiers.mShader->describe(mDescription, mExtensions); |
| } |
| } |
| |
| void OpenGLRenderer::setupDrawColorFilter(const SkColorFilter* filter) { |
| if (filter == NULL) { |
| return; |
| } |
| |
| SkXfermode::Mode mode; |
| if (filter->asColorMode(NULL, &mode)) { |
| mDescription.colorOp = ProgramDescription::kColorBlend; |
| mDescription.colorMode = mode; |
| } else if (filter->asColorMatrix(NULL)) { |
| mDescription.colorOp = ProgramDescription::kColorMatrix; |
| } |
| } |
| |
| void OpenGLRenderer::accountForClear(SkXfermode::Mode mode) { |
| if (mColorSet && mode == SkXfermode::kClear_Mode) { |
| mColorA = 1.0f; |
| mColorR = mColorG = mColorB = 0.0f; |
| mSetShaderColor = mDescription.modulate = true; |
| } |
| } |
| |
| void OpenGLRenderer::setupDrawBlending(const Layer* layer, bool swapSrcDst) { |
| SkXfermode::Mode mode = layer->getMode(); |
| // When the blending mode is kClear_Mode, we need to use a modulate color |
| // argb=1,0,0,0 |
| accountForClear(mode); |
| bool blend = layer->isBlend() || getLayerAlpha(layer) < 1.0f || |
| (mColorSet && mColorA < 1.0f) || |
| (mDrawModifiers.mShader && mDrawModifiers.mShader->blend()) || |
| layer->getColorFilter(); |
| chooseBlending(blend, mode, mDescription, swapSrcDst); |
| } |
| |
| void OpenGLRenderer::setupDrawBlending(const SkPaint* paint, bool blend, bool swapSrcDst) { |
| SkXfermode::Mode mode = getXfermodeDirect(paint); |
| // When the blending mode is kClear_Mode, we need to use a modulate color |
| // argb=1,0,0,0 |
| accountForClear(mode); |
| blend |= (mColorSet && mColorA < 1.0f) || |
| (mDrawModifiers.mShader && mDrawModifiers.mShader->blend()) || |
| (paint && paint->getColorFilter()); |
| chooseBlending(blend, mode, mDescription, swapSrcDst); |
| } |
| |
| void OpenGLRenderer::setupDrawProgram() { |
| useProgram(mCaches.programCache.get(mDescription)); |
| } |
| |
| void OpenGLRenderer::setupDrawDirtyRegionsDisabled() { |
| mTrackDirtyRegions = false; |
| } |
| |
| void OpenGLRenderer::setupDrawModelView(ModelViewMode mode, bool offset, |
| float left, float top, float right, float bottom, bool ignoreTransform) { |
| mModelView.loadTranslate(left, top, 0.0f); |
| if (mode == kModelViewMode_TranslateAndScale) { |
| mModelView.scale(right - left, bottom - top, 1.0f); |
| } |
| |
| bool dirty = right - left > 0.0f && bottom - top > 0.0f; |
| if (!ignoreTransform) { |
| mCaches.currentProgram->set(mViewProjMatrix, mModelView, *currentTransform(), offset); |
| if (dirty && mTrackDirtyRegions) dirtyLayer(left, top, right, bottom, *currentTransform()); |
| } else { |
| mCaches.currentProgram->set(mViewProjMatrix, mModelView, mat4::identity(), offset); |
| if (dirty && mTrackDirtyRegions) dirtyLayer(left, top, right, bottom); |
| } |
| } |
| |
| void OpenGLRenderer::setupDrawColorUniforms() { |
| if ((mColorSet && !mDrawModifiers.mShader) || (mDrawModifiers.mShader && mSetShaderColor)) { |
| mCaches.currentProgram->setColor(mColorR, mColorG, mColorB, mColorA); |
| } |
| } |
| |
| void OpenGLRenderer::setupDrawPureColorUniforms() { |
| if (mSetShaderColor) { |
| mCaches.currentProgram->setColor(mColorR, mColorG, mColorB, mColorA); |
| } |
| } |
| |
| void OpenGLRenderer::setupDrawShaderUniforms(bool ignoreTransform) { |
| if (mDrawModifiers.mShader) { |
| if (ignoreTransform) { |
| // if ignoreTransform=true was passed to setupDrawModelView, undo currentTransform() |
| // because it was built into modelView / the geometry, and the SkiaShader needs to |
| // compensate. |
| mat4 modelViewWithoutTransform; |
| modelViewWithoutTransform.loadInverse(*currentTransform()); |
| modelViewWithoutTransform.multiply(mModelView); |
| mModelView.load(modelViewWithoutTransform); |
| } |
| mDrawModifiers.mShader->setupProgram(mCaches.currentProgram, |
| mModelView, *mSnapshot, &mTextureUnit); |
| } |
| } |
| |
| void OpenGLRenderer::setupDrawColorFilterUniforms(const SkColorFilter* filter) { |
| if (NULL == filter) { |
| return; |
| } |
| |
| SkColor color; |
| SkXfermode::Mode mode; |
| if (filter->asColorMode(&color, &mode)) { |
| const int alpha = SkColorGetA(color); |
| const GLfloat a = alpha / 255.0f; |
| const GLfloat r = a * SkColorGetR(color) / 255.0f; |
| const GLfloat g = a * SkColorGetG(color) / 255.0f; |
| const GLfloat b = a * SkColorGetB(color) / 255.0f; |
| glUniform4f(mCaches.currentProgram->getUniform("colorBlend"), r, g, b, a); |
| return; |
| } |
| |
| SkScalar srcColorMatrix[20]; |
| if (filter->asColorMatrix(srcColorMatrix)) { |
| |
| float colorMatrix[16]; |
| memcpy(colorMatrix, srcColorMatrix, 4 * sizeof(float)); |
| memcpy(&colorMatrix[4], &srcColorMatrix[5], 4 * sizeof(float)); |
| memcpy(&colorMatrix[8], &srcColorMatrix[10], 4 * sizeof(float)); |
| memcpy(&colorMatrix[12], &srcColorMatrix[15], 4 * sizeof(float)); |
| |
| // Skia uses the range [0..255] for the addition vector, but we need |
| // the [0..1] range to apply the vector in GLSL |
| float colorVector[4]; |
| colorVector[0] = srcColorMatrix[4] / 255.0f; |
| colorVector[1] = srcColorMatrix[9] / 255.0f; |
| colorVector[2] = srcColorMatrix[14] / 255.0f; |
| colorVector[3] = srcColorMatrix[19] / 255.0f; |
| |
| glUniformMatrix4fv(mCaches.currentProgram->getUniform("colorMatrix"), 1, |
| GL_FALSE, colorMatrix); |
| glUniform4fv(mCaches.currentProgram->getUniform("colorMatrixVector"), 1, colorVector); |
| return; |
| } |
| |
| // it is an error if we ever get here |
| } |
| |
| void OpenGLRenderer::setupDrawTextGammaUniforms() { |
| mCaches.fontRenderer->setupProgram(mDescription, mCaches.currentProgram); |
| } |
| |
| void OpenGLRenderer::setupDrawSimpleMesh() { |
| bool force = mCaches.bindMeshBuffer(); |
| mCaches.bindPositionVertexPointer(force, 0); |
| mCaches.unbindIndicesBuffer(); |
| } |
| |
| void OpenGLRenderer::setupDrawTexture(GLuint texture) { |
| if (texture) bindTexture(texture); |
| mTextureUnit++; |
| mCaches.enableTexCoordsVertexArray(); |
| } |
| |
| void OpenGLRenderer::setupDrawExternalTexture(GLuint texture) { |
| bindExternalTexture(texture); |
| mTextureUnit++; |
| mCaches.enableTexCoordsVertexArray(); |
| } |
| |
| void OpenGLRenderer::setupDrawTextureTransform() { |
| mDescription.hasTextureTransform = true; |
| } |
| |
| void OpenGLRenderer::setupDrawTextureTransformUniforms(mat4& transform) { |
| glUniformMatrix4fv(mCaches.currentProgram->getUniform("mainTextureTransform"), 1, |
| GL_FALSE, &transform.data[0]); |
| } |
| |
| void OpenGLRenderer::setupDrawMesh(const GLvoid* vertices, |
| const GLvoid* texCoords, GLuint vbo) { |
| bool force = false; |
| if (!vertices || vbo) { |
| force = mCaches.bindMeshBuffer(vbo == 0 ? mCaches.meshBuffer : vbo); |
| } else { |
| force = mCaches.unbindMeshBuffer(); |
| } |
| |
| mCaches.bindPositionVertexPointer(force, vertices); |
| if (mCaches.currentProgram->texCoords >= 0) { |
| mCaches.bindTexCoordsVertexPointer(force, texCoords); |
| } |
| |
| mCaches.unbindIndicesBuffer(); |
| } |
| |
| void OpenGLRenderer::setupDrawMesh(const GLvoid* vertices, |
| const GLvoid* texCoords, const GLvoid* colors) { |
| bool force = mCaches.unbindMeshBuffer(); |
| GLsizei stride = sizeof(ColorTextureVertex); |
| |
| mCaches.bindPositionVertexPointer(force, vertices, stride); |
| if (mCaches.currentProgram->texCoords >= 0) { |
| mCaches.bindTexCoordsVertexPointer(force, texCoords, stride); |
| } |
| int slot = mCaches.currentProgram->getAttrib("colors"); |
| if (slot >= 0) { |
| glEnableVertexAttribArray(slot); |
| glVertexAttribPointer(slot, 4, GL_FLOAT, GL_FALSE, stride, colors); |
| } |
| |
| mCaches.unbindIndicesBuffer(); |
| } |
| |
| void OpenGLRenderer::setupDrawMeshIndices(const GLvoid* vertices, |
| const GLvoid* texCoords, GLuint vbo) { |
| bool force = false; |
| // If vbo is != 0 we want to treat the vertices parameter as an offset inside |
| // a VBO. However, if vertices is set to NULL and vbo == 0 then we want to |
| // use the default VBO found in Caches |
| if (!vertices || vbo) { |
| force = mCaches.bindMeshBuffer(vbo == 0 ? mCaches.meshBuffer : vbo); |
| } else { |
| force = mCaches.unbindMeshBuffer(); |
| } |
| mCaches.bindQuadIndicesBuffer(); |
| |
| mCaches.bindPositionVertexPointer(force, vertices); |
| if (mCaches.currentProgram->texCoords >= 0) { |
| mCaches.bindTexCoordsVertexPointer(force, texCoords); |
| } |
| } |
| |
| void OpenGLRenderer::setupDrawIndexedVertices(GLvoid* vertices) { |
| bool force = mCaches.unbindMeshBuffer(); |
| mCaches.bindQuadIndicesBuffer(); |
| mCaches.bindPositionVertexPointer(force, vertices, gVertexStride); |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| // Drawing |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| status_t OpenGLRenderer::drawDisplayList(RenderNode* displayList, Rect& dirty, |
| int32_t replayFlags) { |
| status_t status; |
| // All the usual checks and setup operations (quickReject, setupDraw, etc.) |
| // will be performed by the display list itself |
| if (displayList && displayList->isRenderable()) { |
| // compute 3d ordering |
| displayList->computeOrdering(); |
| if (CC_UNLIKELY(mCaches.drawDeferDisabled)) { |
| status = startFrame(); |
| ReplayStateStruct replayStruct(*this, dirty, replayFlags); |
| displayList->replayNodeTree(replayStruct); |
| return status | replayStruct.mDrawGlStatus; |
| } |
| |
| bool avoidOverdraw = !mCaches.debugOverdraw && !mCountOverdraw; // shh, don't tell devs! |
| DeferredDisplayList deferredList(*currentClipRect(), avoidOverdraw); |
| DeferStateStruct deferStruct(deferredList, *this, replayFlags); |
| displayList->deferNodeTree(deferStruct); |
| |
| flushLayers(); |
| status = startFrame(); |
| |
| return deferredList.flush(*this, dirty) | status; |
| } |
| |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| void OpenGLRenderer::drawAlphaBitmap(Texture* texture, float left, float top, const SkPaint* paint) { |
| int color = paint != NULL ? paint->getColor() : 0; |
| |
| float x = left; |
| float y = top; |
| |
| texture->setWrap(GL_CLAMP_TO_EDGE, true); |
| |
| bool ignoreTransform = false; |
| if (currentTransform()->isPureTranslate()) { |
| x = (int) floorf(left + currentTransform()->getTranslateX() + 0.5f); |
| y = (int) floorf(top + currentTransform()->getTranslateY() + 0.5f); |
| ignoreTransform = true; |
| |
| texture->setFilter(GL_NEAREST, true); |
| } else { |
| texture->setFilter(getFilter(paint), true); |
| } |
| |
| // No need to check for a UV mapper on the texture object, only ARGB_8888 |
| // bitmaps get packed in the atlas |
| drawAlpha8TextureMesh(x, y, x + texture->width, y + texture->height, texture->id, |
| paint, (GLvoid*) NULL, (GLvoid*) gMeshTextureOffset, |
| GL_TRIANGLE_STRIP, gMeshCount, ignoreTransform); |
| } |
| |
| /** |
| * Important note: this method is intended to draw batches of bitmaps and |
| * will not set the scissor enable or dirty the current layer, if any. |
| * The caller is responsible for properly dirtying the current layer. |
| */ |
| status_t OpenGLRenderer::drawBitmaps(const SkBitmap* bitmap, AssetAtlas::Entry* entry, |
| int bitmapCount, TextureVertex* vertices, bool pureTranslate, |
| const Rect& bounds, const SkPaint* paint) { |
| mCaches.activeTexture(0); |
| Texture* texture = entry ? entry->texture : mCaches.textureCache.get(bitmap); |
| if (!texture) return DrawGlInfo::kStatusDone; |
| |
| const AutoTexture autoCleanup(texture); |
| |
| texture->setWrap(GL_CLAMP_TO_EDGE, true); |
| texture->setFilter(pureTranslate ? GL_NEAREST : getFilter(paint), true); |
| |
| const float x = (int) floorf(bounds.left + 0.5f); |
| const float y = (int) floorf(bounds.top + 0.5f); |
| if (CC_UNLIKELY(bitmap->config() == SkBitmap::kA8_Config)) { |
| drawAlpha8TextureMesh(x, y, x + bounds.getWidth(), y + bounds.getHeight(), |
| texture->id, paint, &vertices[0].x, &vertices[0].u, |
| GL_TRIANGLES, bitmapCount * 6, true, |
| kModelViewMode_Translate, false); |
| } else { |
| drawTextureMesh(x, y, x + bounds.getWidth(), y + bounds.getHeight(), |
| texture->id, paint, texture->blend, &vertices[0].x, &vertices[0].u, |
| GL_TRIANGLES, bitmapCount * 6, false, true, 0, |
| kModelViewMode_Translate, false); |
| } |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| status_t OpenGLRenderer::drawBitmap(const SkBitmap* bitmap, float left, float top, |
| const SkPaint* paint) { |
| const float right = left + bitmap->width(); |
| const float bottom = top + bitmap->height(); |
| |
| if (quickRejectSetupScissor(left, top, right, bottom)) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| mCaches.activeTexture(0); |
| Texture* texture = getTexture(bitmap); |
| if (!texture) return DrawGlInfo::kStatusDone; |
| const AutoTexture autoCleanup(texture); |
| |
| if (CC_UNLIKELY(bitmap->config() == SkBitmap::kA8_Config)) { |
| drawAlphaBitmap(texture, left, top, paint); |
| } else { |
| drawTextureRect(left, top, right, bottom, texture, paint); |
| } |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| status_t OpenGLRenderer::drawBitmap(const SkBitmap* bitmap, const SkMatrix* matrix, |
| const SkPaint* paint) { |
| Rect r(0.0f, 0.0f, bitmap->width(), bitmap->height()); |
| const mat4 transform(*matrix); |
| transform.mapRect(r); |
| |
| if (quickRejectSetupScissor(r.left, r.top, r.right, r.bottom)) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| mCaches.activeTexture(0); |
| Texture* texture = getTexture(bitmap); |
| if (!texture) return DrawGlInfo::kStatusDone; |
| const AutoTexture autoCleanup(texture); |
| |
| // This could be done in a cheaper way, all we need is pass the matrix |
| // to the vertex shader. The save/restore is a bit overkill. |
| save(SkCanvas::kMatrix_SaveFlag); |
| concatMatrix(matrix); |
| if (CC_UNLIKELY(bitmap->config() == SkBitmap::kA8_Config)) { |
| drawAlphaBitmap(texture, 0.0f, 0.0f, paint); |
| } else { |
| drawTextureRect(0.0f, 0.0f, bitmap->width(), bitmap->height(), texture, paint); |
| } |
| restore(); |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| status_t OpenGLRenderer::drawBitmapData(const SkBitmap* bitmap, float left, float top, |
| const SkPaint* paint) { |
| const float right = left + bitmap->width(); |
| const float bottom = top + bitmap->height(); |
| |
| if (quickRejectSetupScissor(left, top, right, bottom)) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| mCaches.activeTexture(0); |
| Texture* texture = mCaches.textureCache.getTransient(bitmap); |
| const AutoTexture autoCleanup(texture); |
| |
| if (CC_UNLIKELY(bitmap->config() == SkBitmap::kA8_Config)) { |
| drawAlphaBitmap(texture, left, top, paint); |
| } else { |
| drawTextureRect(left, top, right, bottom, texture, paint); |
| } |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| status_t OpenGLRenderer::drawBitmapMesh(const SkBitmap* bitmap, int meshWidth, int meshHeight, |
| const float* vertices, const int* colors, const SkPaint* paint) { |
| if (!vertices || currentSnapshot()->isIgnored()) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| // TODO: use quickReject on bounds from vertices |
| mCaches.enableScissor(); |
| |
| float left = FLT_MAX; |
| float top = FLT_MAX; |
| float right = FLT_MIN; |
| float bottom = FLT_MIN; |
| |
| const uint32_t count = meshWidth * meshHeight * 6; |
| |
| Vector<ColorTextureVertex> mesh; // TODO: use C++11 unique_ptr |
| mesh.setCapacity(count); |
| ColorTextureVertex* vertex = mesh.editArray(); |
| |
| bool cleanupColors = false; |
| if (!colors) { |
| uint32_t colorsCount = (meshWidth + 1) * (meshHeight + 1); |
| int* newColors = new int[colorsCount]; |
| memset(newColors, 0xff, colorsCount * sizeof(int)); |
| colors = newColors; |
| cleanupColors = true; |
| } |
| |
| mCaches.activeTexture(0); |
| Texture* texture = mCaches.assetAtlas.getEntryTexture(bitmap); |
| const UvMapper& mapper(getMapper(texture)); |
| |
| for (int32_t y = 0; y < meshHeight; y++) { |
| for (int32_t x = 0; x < meshWidth; x++) { |
| uint32_t i = (y * (meshWidth + 1) + x) * 2; |
| |
| float u1 = float(x) / meshWidth; |
| float u2 = float(x + 1) / meshWidth; |
| float v1 = float(y) / meshHeight; |
| float v2 = float(y + 1) / meshHeight; |
| |
| mapper.map(u1, v1, u2, v2); |
| |
| int ax = i + (meshWidth + 1) * 2; |
| int ay = ax + 1; |
| int bx = i; |
| int by = bx + 1; |
| int cx = i + 2; |
| int cy = cx + 1; |
| int dx = i + (meshWidth + 1) * 2 + 2; |
| int dy = dx + 1; |
| |
| ColorTextureVertex::set(vertex++, vertices[dx], vertices[dy], u2, v2, colors[dx / 2]); |
| ColorTextureVertex::set(vertex++, vertices[ax], vertices[ay], u1, v2, colors[ax / 2]); |
| ColorTextureVertex::set(vertex++, vertices[bx], vertices[by], u1, v1, colors[bx / 2]); |
| |
| ColorTextureVertex::set(vertex++, vertices[dx], vertices[dy], u2, v2, colors[dx / 2]); |
| ColorTextureVertex::set(vertex++, vertices[bx], vertices[by], u1, v1, colors[bx / 2]); |
| ColorTextureVertex::set(vertex++, vertices[cx], vertices[cy], u2, v1, colors[cx / 2]); |
| |
| left = fminf(left, fminf(vertices[ax], fminf(vertices[bx], vertices[cx]))); |
| top = fminf(top, fminf(vertices[ay], fminf(vertices[by], vertices[cy]))); |
| right = fmaxf(right, fmaxf(vertices[ax], fmaxf(vertices[bx], vertices[cx]))); |
| bottom = fmaxf(bottom, fmaxf(vertices[ay], fmaxf(vertices[by], vertices[cy]))); |
| } |
| } |
| |
| if (quickRejectSetupScissor(left, top, right, bottom)) { |
| if (cleanupColors) delete[] colors; |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| if (!texture) { |
| texture = mCaches.textureCache.get(bitmap); |
| if (!texture) { |
| if (cleanupColors) delete[] colors; |
| return DrawGlInfo::kStatusDone; |
| } |
| } |
| const AutoTexture autoCleanup(texture); |
| |
| texture->setWrap(GL_CLAMP_TO_EDGE, true); |
| texture->setFilter(getFilter(paint), true); |
| |
| int alpha; |
| SkXfermode::Mode mode; |
| getAlphaAndMode(paint, &alpha, &mode); |
| |
| float a = alpha / 255.0f; |
| |
| if (hasLayer()) { |
| dirtyLayer(left, top, right, bottom, *currentTransform()); |
| } |
| |
| setupDraw(); |
| setupDrawWithTextureAndColor(); |
| setupDrawColor(a, a, a, a); |
| setupDrawColorFilter(getColorFilter(paint)); |
| setupDrawBlending(paint, true); |
| setupDrawProgram(); |
| setupDrawDirtyRegionsDisabled(); |
| setupDrawModelView(kModelViewMode_TranslateAndScale, false, 0.0f, 0.0f, 1.0f, 1.0f); |
| setupDrawTexture(texture->id); |
| setupDrawPureColorUniforms(); |
| setupDrawColorFilterUniforms(getColorFilter(paint)); |
| setupDrawMesh(&mesh[0].x, &mesh[0].u, &mesh[0].r); |
| |
| glDrawArrays(GL_TRIANGLES, 0, count); |
| |
| int slot = mCaches.currentProgram->getAttrib("colors"); |
| if (slot >= 0) { |
| glDisableVertexAttribArray(slot); |
| } |
| |
| if (cleanupColors) delete[] colors; |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| status_t OpenGLRenderer::drawBitmap(const SkBitmap* bitmap, |
| float srcLeft, float srcTop, float srcRight, float srcBottom, |
| float dstLeft, float dstTop, float dstRight, float dstBottom, |
| const SkPaint* paint) { |
| if (quickRejectSetupScissor(dstLeft, dstTop, dstRight, dstBottom)) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| mCaches.activeTexture(0); |
| Texture* texture = getTexture(bitmap); |
| if (!texture) return DrawGlInfo::kStatusDone; |
| const AutoTexture autoCleanup(texture); |
| |
| const float width = texture->width; |
| const float height = texture->height; |
| |
| float u1 = fmax(0.0f, srcLeft / width); |
| float v1 = fmax(0.0f, srcTop / height); |
| float u2 = fmin(1.0f, srcRight / width); |
| float v2 = fmin(1.0f, srcBottom / height); |
| |
| getMapper(texture).map(u1, v1, u2, v2); |
| |
| mCaches.unbindMeshBuffer(); |
| resetDrawTextureTexCoords(u1, v1, u2, v2); |
| |
| texture->setWrap(GL_CLAMP_TO_EDGE, true); |
| |
| float scaleX = (dstRight - dstLeft) / (srcRight - srcLeft); |
| float scaleY = (dstBottom - dstTop) / (srcBottom - srcTop); |
| |
| bool scaled = scaleX != 1.0f || scaleY != 1.0f; |
| // Apply a scale transform on the canvas only when a shader is in use |
| // Skia handles the ratio between the dst and src rects as a scale factor |
| // when a shader is set |
| bool useScaleTransform = mDrawModifiers.mShader && scaled; |
| bool ignoreTransform = false; |
| |
| if (CC_LIKELY(currentTransform()->isPureTranslate() && !useScaleTransform)) { |
| float x = (int) floorf(dstLeft + currentTransform()->getTranslateX() + 0.5f); |
| float y = (int) floorf(dstTop + currentTransform()->getTranslateY() + 0.5f); |
| |
| dstRight = x + (dstRight - dstLeft); |
| dstBottom = y + (dstBottom - dstTop); |
| |
| dstLeft = x; |
| dstTop = y; |
| |
| texture->setFilter(scaled ? getFilter(paint) : GL_NEAREST, true); |
| ignoreTransform = true; |
| } else { |
| texture->setFilter(getFilter(paint), true); |
| } |
| |
| if (CC_UNLIKELY(useScaleTransform)) { |
| save(SkCanvas::kMatrix_SaveFlag); |
| translate(dstLeft, dstTop); |
| scale(scaleX, scaleY); |
| |
| dstLeft = 0.0f; |
| dstTop = 0.0f; |
| |
| dstRight = srcRight - srcLeft; |
| dstBottom = srcBottom - srcTop; |
| } |
| |
| if (CC_UNLIKELY(bitmap->config() == SkBitmap::kA8_Config)) { |
| drawAlpha8TextureMesh(dstLeft, dstTop, dstRight, dstBottom, |
| texture->id, paint, |
| &mMeshVertices[0].x, &mMeshVertices[0].u, |
| GL_TRIANGLE_STRIP, gMeshCount, ignoreTransform); |
| } else { |
| drawTextureMesh(dstLeft, dstTop, dstRight, dstBottom, |
| texture->id, paint, texture->blend, |
| &mMeshVertices[0].x, &mMeshVertices[0].u, |
| GL_TRIANGLE_STRIP, gMeshCount, false, ignoreTransform); |
| } |
| |
| if (CC_UNLIKELY(useScaleTransform)) { |
| restore(); |
| } |
| |
| resetDrawTextureTexCoords(0.0f, 0.0f, 1.0f, 1.0f); |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| status_t OpenGLRenderer::drawPatch(const SkBitmap* bitmap, const Res_png_9patch* patch, |
| float left, float top, float right, float bottom, const SkPaint* paint) { |
| if (quickRejectSetupScissor(left, top, right, bottom)) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| AssetAtlas::Entry* entry = mCaches.assetAtlas.getEntry(bitmap); |
| const Patch* mesh = mCaches.patchCache.get(entry, bitmap->width(), bitmap->height(), |
| right - left, bottom - top, patch); |
| |
| return drawPatch(bitmap, mesh, entry, left, top, right, bottom, paint); |
| } |
| |
| status_t OpenGLRenderer::drawPatch(const SkBitmap* bitmap, const Patch* mesh, |
| AssetAtlas::Entry* entry, float left, float top, float right, float bottom, |
| const SkPaint* paint) { |
| if (quickRejectSetupScissor(left, top, right, bottom)) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| if (CC_LIKELY(mesh && mesh->verticesCount > 0)) { |
| mCaches.activeTexture(0); |
| Texture* texture = entry ? entry->texture : mCaches.textureCache.get(bitmap); |
| if (!texture) return DrawGlInfo::kStatusDone; |
| const AutoTexture autoCleanup(texture); |
| |
| texture->setWrap(GL_CLAMP_TO_EDGE, true); |
| texture->setFilter(GL_LINEAR, true); |
| |
| const bool pureTranslate = currentTransform()->isPureTranslate(); |
| // Mark the current layer dirty where we are going to draw the patch |
| if (hasLayer() && mesh->hasEmptyQuads) { |
| const float offsetX = left + currentTransform()->getTranslateX(); |
| const float offsetY = top + currentTransform()->getTranslateY(); |
| const size_t count = mesh->quads.size(); |
| for (size_t i = 0; i < count; i++) { |
| const Rect& bounds = mesh->quads.itemAt(i); |
| if (CC_LIKELY(pureTranslate)) { |
| const float x = (int) floorf(bounds.left + offsetX + 0.5f); |
| const float y = (int) floorf(bounds.top + offsetY + 0.5f); |
| dirtyLayer(x, y, x + bounds.getWidth(), y + bounds.getHeight()); |
| } else { |
| dirtyLayer(left + bounds.left, top + bounds.top, |
| left + bounds.right, top + bounds.bottom, *currentTransform()); |
| } |
| } |
| } |
| |
| bool ignoreTransform = false; |
| if (CC_LIKELY(pureTranslate)) { |
| const float x = (int) floorf(left + currentTransform()->getTranslateX() + 0.5f); |
| const float y = (int) floorf(top + currentTransform()->getTranslateY() + 0.5f); |
| |
| right = x + right - left; |
| bottom = y + bottom - top; |
| left = x; |
| top = y; |
| ignoreTransform = true; |
| } |
| drawIndexedTextureMesh(left, top, right, bottom, texture->id, paint, |
| texture->blend, (GLvoid*) mesh->offset, (GLvoid*) mesh->textureOffset, |
| GL_TRIANGLES, mesh->indexCount, false, ignoreTransform, |
| mCaches.patchCache.getMeshBuffer(), kModelViewMode_Translate, !mesh->hasEmptyQuads); |
| } |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| /** |
| * Important note: this method is intended to draw batches of 9-patch objects and |
| * will not set the scissor enable or dirty the current layer, if any. |
| * The caller is responsible for properly dirtying the current layer. |
| */ |
| status_t OpenGLRenderer::drawPatches(const SkBitmap* bitmap, AssetAtlas::Entry* entry, |
| TextureVertex* vertices, uint32_t indexCount, const SkPaint* paint) { |
| mCaches.activeTexture(0); |
| Texture* texture = entry ? entry->texture : mCaches.textureCache.get(bitmap); |
| if (!texture) return DrawGlInfo::kStatusDone; |
| const AutoTexture autoCleanup(texture); |
| |
| texture->setWrap(GL_CLAMP_TO_EDGE, true); |
| texture->setFilter(GL_LINEAR, true); |
| |
| drawIndexedTextureMesh(0.0f, 0.0f, 1.0f, 1.0f, texture->id, paint, |
| texture->blend, &vertices[0].x, &vertices[0].u, |
| GL_TRIANGLES, indexCount, false, true, 0, kModelViewMode_Translate, false); |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| status_t OpenGLRenderer::drawVertexBuffer(VertexBufferMode mode, |
| const VertexBuffer& vertexBuffer, const SkPaint* paint, bool useOffset) { |
| // not missing call to quickReject/dirtyLayer, always done at a higher level |
| if (!vertexBuffer.getVertexCount()) { |
| // no vertices to draw |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| int color = paint->getColor(); |
| bool isAA = paint->isAntiAlias(); |
| |
| setupDraw(); |
| setupDrawNoTexture(); |
| if (isAA) setupDrawAA(); |
| setupDrawColor(color, ((color >> 24) & 0xFF) * mSnapshot->alpha); |
| setupDrawColorFilter(getColorFilter(paint)); |
| setupDrawShader(); |
| setupDrawBlending(paint, isAA); |
| setupDrawProgram(); |
| setupDrawModelView(kModelViewMode_Translate, useOffset, 0, 0, 0, 0); |
| setupDrawColorUniforms(); |
| setupDrawColorFilterUniforms(getColorFilter(paint)); |
| setupDrawShaderUniforms(); |
| |
| const void* vertices = vertexBuffer.getBuffer(); |
| bool force = mCaches.unbindMeshBuffer(); |
| mCaches.bindPositionVertexPointer(true, vertices, isAA ? gAlphaVertexStride : gVertexStride); |
| mCaches.resetTexCoordsVertexPointer(); |
| |
| |
| int alphaSlot = -1; |
| if (isAA) { |
| void* alphaCoords = ((GLbyte*) vertices) + gVertexAlphaOffset; |
| alphaSlot = mCaches.currentProgram->getAttrib("vtxAlpha"); |
| // TODO: avoid enable/disable in back to back uses of the alpha attribute |
| glEnableVertexAttribArray(alphaSlot); |
| glVertexAttribPointer(alphaSlot, 1, GL_FLOAT, GL_FALSE, gAlphaVertexStride, alphaCoords); |
| } |
| |
| if (mode == kVertexBufferMode_Standard) { |
| mCaches.unbindIndicesBuffer(); |
| glDrawArrays(GL_TRIANGLE_STRIP, 0, vertexBuffer.getVertexCount()); |
| } else if (mode == kVertexBufferMode_OnePolyRingShadow) { |
| mCaches.bindShadowIndicesBuffer(); |
| glDrawElements(GL_TRIANGLE_STRIP, ONE_POLY_RING_SHADOW_INDEX_COUNT, GL_UNSIGNED_SHORT, 0); |
| } else if (mode == kVertexBufferMode_TwoPolyRingShadow) { |
| mCaches.bindShadowIndicesBuffer(); |
| glDrawElements(GL_TRIANGLE_STRIP, TWO_POLY_RING_SHADOW_INDEX_COUNT, GL_UNSIGNED_SHORT, 0); |
| } |
| |
| if (isAA) { |
| glDisableVertexAttribArray(alphaSlot); |
| } |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| /** |
| * Renders a convex path via tessellation. For AA paths, this function uses a similar approach to |
| * that of AA lines in the drawLines() function. We expand the convex path by a half pixel in |
| * screen space in all directions. However, instead of using a fragment shader to compute the |
| * translucency of the color from its position, we simply use a varying parameter to define how far |
| * a given pixel is from the edge. For non-AA paths, the expansion and alpha varying are not used. |
| * |
| * Doesn't yet support joins, caps, or path effects. |
| */ |
| status_t OpenGLRenderer::drawConvexPath(const SkPath& path, const SkPaint* paint) { |
| VertexBuffer vertexBuffer; |
| // TODO: try clipping large paths to viewport |
| PathTessellator::tessellatePath(path, paint, *currentTransform(), vertexBuffer); |
| |
| if (hasLayer()) { |
| SkRect bounds = path.getBounds(); |
| PathTessellator::expandBoundsForStroke(bounds, paint); |
| dirtyLayer(bounds.fLeft, bounds.fTop, bounds.fRight, bounds.fBottom, *currentTransform()); |
| } |
| |
| return drawVertexBuffer(kVertexBufferMode_Standard, vertexBuffer, paint); |
| } |
| |
| /** |
| * We create tristrips for the lines much like shape stroke tessellation, using a per-vertex alpha |
| * and additional geometry for defining an alpha slope perimeter. |
| * |
| * Using GL_LINES can be difficult because the rasterization rules for those lines produces some |
| * unexpected results, and may vary between hardware devices. Previously we used a varying-base |
| * in-shader alpha region, but found it to be taxing on some GPUs. |
| * |
| * TODO: try using a fixed input buffer for non-capped lines as in text rendering. this may reduce |
| * memory transfer by removing need for degenerate vertices. |
| */ |
| status_t OpenGLRenderer::drawLines(const float* points, int count, const SkPaint* paint) { |
| if (currentSnapshot()->isIgnored() || count < 4) return DrawGlInfo::kStatusDone; |
| |
| count &= ~0x3; // round down to nearest four |
| |
| VertexBuffer buffer; |
| SkRect bounds; |
| PathTessellator::tessellateLines(points, count, paint, *currentTransform(), bounds, buffer); |
| |
| // can't pass paint, since style would be checked for outset. outset done by tessellation. |
| if (quickRejectSetupScissor(bounds.fLeft, bounds.fTop, bounds.fRight, bounds.fBottom)) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| dirtyLayer(bounds.fLeft, bounds.fTop, bounds.fRight, bounds.fBottom, *currentTransform()); |
| |
| bool useOffset = !paint->isAntiAlias(); |
| return drawVertexBuffer(kVertexBufferMode_Standard, buffer, paint, useOffset); |
| } |
| |
| status_t OpenGLRenderer::drawPoints(const float* points, int count, const SkPaint* paint) { |
| if (currentSnapshot()->isIgnored() || count < 2) return DrawGlInfo::kStatusDone; |
| |
| count &= ~0x1; // round down to nearest two |
| |
| VertexBuffer buffer; |
| SkRect bounds; |
| PathTessellator::tessellatePoints(points, count, paint, *currentTransform(), bounds, buffer); |
| |
| // can't pass paint, since style would be checked for outset. outset done by tessellation. |
| if (quickRejectSetupScissor(bounds.fLeft, bounds.fTop, bounds.fRight, bounds.fBottom)) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| dirtyLayer(bounds.fLeft, bounds.fTop, bounds.fRight, bounds.fBottom, *currentTransform()); |
| |
| bool useOffset = !paint->isAntiAlias(); |
| return drawVertexBuffer(kVertexBufferMode_Standard, buffer, paint, useOffset); |
| } |
| |
| status_t OpenGLRenderer::drawColor(int color, SkXfermode::Mode mode) { |
| // No need to check against the clip, we fill the clip region |
| if (currentSnapshot()->isIgnored()) return DrawGlInfo::kStatusDone; |
| |
| Rect clip(*currentClipRect()); |
| clip.snapToPixelBoundaries(); |
| |
| SkPaint paint; |
| paint.setColor(color); |
| paint.setXfermodeMode(mode); |
| |
| drawColorRect(clip.left, clip.top, clip.right, clip.bottom, &paint, true); |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| status_t OpenGLRenderer::drawShape(float left, float top, const PathTexture* texture, |
| const SkPaint* paint) { |
| if (!texture) return DrawGlInfo::kStatusDone; |
| const AutoTexture autoCleanup(texture); |
| |
| const float x = left + texture->left - texture->offset; |
| const float y = top + texture->top - texture->offset; |
| |
| drawPathTexture(texture, x, y, paint); |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| status_t OpenGLRenderer::drawRoundRect(float left, float top, float right, float bottom, |
| float rx, float ry, const SkPaint* p) { |
| if (currentSnapshot()->isIgnored() || quickRejectSetupScissor(left, top, right, bottom, p) || |
| (p->getAlpha() == 0 && getXfermode(p->getXfermode()) != SkXfermode::kClear_Mode)) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| if (p->getPathEffect() != 0) { |
| mCaches.activeTexture(0); |
| const PathTexture* texture = mCaches.pathCache.getRoundRect( |
| right - left, bottom - top, rx, ry, p); |
| return drawShape(left, top, texture, p); |
| } |
| |
| SkPath path; |
| SkRect rect = SkRect::MakeLTRB(left, top, right, bottom); |
| if (p->getStyle() == SkPaint::kStrokeAndFill_Style) { |
| float outset = p->getStrokeWidth() / 2; |
| rect.outset(outset, outset); |
| rx += outset; |
| ry += outset; |
| } |
| path.addRoundRect(rect, rx, ry); |
| return drawConvexPath(path, p); |
| } |
| |
| status_t OpenGLRenderer::drawCircle(float x, float y, float radius, const SkPaint* p) { |
| if (currentSnapshot()->isIgnored() || quickRejectSetupScissor(x - radius, y - radius, |
| x + radius, y + radius, p) || |
| (p->getAlpha() == 0 && getXfermode(p->getXfermode()) != SkXfermode::kClear_Mode)) { |
| return DrawGlInfo::kStatusDone; |
| } |
| if (p->getPathEffect() != 0) { |
| mCaches.activeTexture(0); |
| const PathTexture* texture = mCaches.pathCache.getCircle(radius, p); |
| return drawShape(x - radius, y - radius, texture, p); |
| } |
| |
| SkPath path; |
| if (p->getStyle() == SkPaint::kStrokeAndFill_Style) { |
| path.addCircle(x, y, radius + p->getStrokeWidth() / 2); |
| } else { |
| path.addCircle(x, y, radius); |
| } |
| return drawConvexPath(path, p); |
| } |
| |
| status_t OpenGLRenderer::drawOval(float left, float top, float right, float bottom, |
| const SkPaint* p) { |
| if (currentSnapshot()->isIgnored() || quickRejectSetupScissor(left, top, right, bottom, p) || |
| (p->getAlpha() == 0 && getXfermode(p->getXfermode()) != SkXfermode::kClear_Mode)) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| if (p->getPathEffect() != 0) { |
| mCaches.activeTexture(0); |
| const PathTexture* texture = mCaches.pathCache.getOval(right - left, bottom - top, p); |
| return drawShape(left, top, texture, p); |
| } |
| |
| SkPath path; |
| SkRect rect = SkRect::MakeLTRB(left, top, right, bottom); |
| if (p->getStyle() == SkPaint::kStrokeAndFill_Style) { |
| rect.outset(p->getStrokeWidth() / 2, p->getStrokeWidth() / 2); |
| } |
| path.addOval(rect); |
| return drawConvexPath(path, p); |
| } |
| |
| status_t OpenGLRenderer::drawArc(float left, float top, float right, float bottom, |
| float startAngle, float sweepAngle, bool useCenter, const SkPaint* p) { |
| if (currentSnapshot()->isIgnored() || quickRejectSetupScissor(left, top, right, bottom, p) || |
| (p->getAlpha() == 0 && getXfermode(p->getXfermode()) != SkXfermode::kClear_Mode)) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| if (fabs(sweepAngle) >= 360.0f) { |
| return drawOval(left, top, right, bottom, p); |
| } |
| |
| // TODO: support fills (accounting for concavity if useCenter && sweepAngle > 180) |
| if (p->getStyle() != SkPaint::kStroke_Style || p->getPathEffect() != 0 || useCenter) { |
| mCaches.activeTexture(0); |
| const PathTexture* texture = mCaches.pathCache.getArc(right - left, bottom - top, |
| startAngle, sweepAngle, useCenter, p); |
| return drawShape(left, top, texture, p); |
| } |
| |
| SkRect rect = SkRect::MakeLTRB(left, top, right, bottom); |
| if (p->getStyle() == SkPaint::kStrokeAndFill_Style) { |
| rect.outset(p->getStrokeWidth() / 2, p->getStrokeWidth() / 2); |
| } |
| |
| SkPath path; |
| if (useCenter) { |
| path.moveTo(rect.centerX(), rect.centerY()); |
| } |
| path.arcTo(rect, startAngle, sweepAngle, !useCenter); |
| if (useCenter) { |
| path.close(); |
| } |
| return drawConvexPath(path, p); |
| } |
| |
| // See SkPaintDefaults.h |
| #define SkPaintDefaults_MiterLimit SkIntToScalar(4) |
| |
| status_t OpenGLRenderer::drawRect(float left, float top, float right, float bottom, |
| const SkPaint* p) { |
| if (currentSnapshot()->isIgnored() || quickRejectSetupScissor(left, top, right, bottom, p) || |
| (p->getAlpha() == 0 && getXfermode(p->getXfermode()) != SkXfermode::kClear_Mode)) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| if (p->getStyle() != SkPaint::kFill_Style) { |
| // only fill style is supported by drawConvexPath, since others have to handle joins |
| if (p->getPathEffect() != 0 || p->getStrokeJoin() != SkPaint::kMiter_Join || |
| p->getStrokeMiter() != SkPaintDefaults_MiterLimit) { |
| mCaches.activeTexture(0); |
| const PathTexture* texture = |
| mCaches.pathCache.getRect(right - left, bottom - top, p); |
| return drawShape(left, top, texture, p); |
| } |
| |
| SkPath path; |
| SkRect rect = SkRect::MakeLTRB(left, top, right, bottom); |
| if (p->getStyle() == SkPaint::kStrokeAndFill_Style) { |
| rect.outset(p->getStrokeWidth() / 2, p->getStrokeWidth() / 2); |
| } |
| path.addRect(rect); |
| return drawConvexPath(path, p); |
| } |
| |
| if (p->isAntiAlias() && !currentTransform()->isSimple()) { |
| SkPath path; |
| path.addRect(left, top, right, bottom); |
| return drawConvexPath(path, p); |
| } else { |
| drawColorRect(left, top, right, bottom, p); |
| return DrawGlInfo::kStatusDrew; |
| } |
| } |
| |
| void OpenGLRenderer::drawTextShadow(const SkPaint* paint, const char* text, |
| int bytesCount, int count, const float* positions, |
| FontRenderer& fontRenderer, int alpha, float x, float y) { |
| mCaches.activeTexture(0); |
| |
| TextShadow textShadow; |
| if (!getTextShadow(paint, &textShadow)) { |
| LOG_ALWAYS_FATAL("failed to query shadow attributes"); |
| } |
| |
| // NOTE: The drop shadow will not perform gamma correction |
| // if shader-based correction is enabled |
| mCaches.dropShadowCache.setFontRenderer(fontRenderer); |
| const ShadowTexture* shadow = mCaches.dropShadowCache.get( |
| paint, text, bytesCount, count, textShadow.radius, positions); |
| // If the drop shadow exceeds the max texture size or couldn't be |
| // allocated, skip drawing |
| if (!shadow) return; |
| const AutoTexture autoCleanup(shadow); |
| |
| const float sx = x - shadow->left + textShadow.dx; |
| const float sy = y - shadow->top + textShadow.dy; |
| |
| const int shadowAlpha = ((textShadow.color >> 24) & 0xFF) * mSnapshot->alpha; |
| if (mDrawModifiers.mShader) { |
| textShadow.color = SK_ColorWHITE; |
| } |
| |
| setupDraw(); |
| setupDrawWithTexture(true); |
| setupDrawAlpha8Color(textShadow.color, shadowAlpha < 255 ? shadowAlpha : alpha); |
| setupDrawColorFilter(getColorFilter(paint)); |
| setupDrawShader(); |
| setupDrawBlending(paint, true); |
| setupDrawProgram(); |
| setupDrawModelView(kModelViewMode_TranslateAndScale, false, |
| sx, sy, sx + shadow->width, sy + shadow->height); |
| setupDrawTexture(shadow->id); |
| setupDrawPureColorUniforms(); |
| setupDrawColorFilterUniforms(getColorFilter(paint)); |
| setupDrawShaderUniforms(); |
| setupDrawMesh(NULL, (GLvoid*) gMeshTextureOffset); |
| |
| glDrawArrays(GL_TRIANGLE_STRIP, 0, gMeshCount); |
| } |
| |
| bool OpenGLRenderer::canSkipText(const SkPaint* paint) const { |
| float alpha = (hasTextShadow(paint) ? 1.0f : paint->getAlpha()) * mSnapshot->alpha; |
| return alpha == 0.0f && getXfermode(paint->getXfermode()) == SkXfermode::kSrcOver_Mode; |
| } |
| |
| status_t OpenGLRenderer::drawPosText(const char* text, int bytesCount, int count, |
| const float* positions, const SkPaint* paint) { |
| if (text == NULL || count == 0 || currentSnapshot()->isIgnored() || canSkipText(paint)) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| // NOTE: Skia does not support perspective transform on drawPosText yet |
| if (!currentTransform()->isSimple()) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| mCaches.enableScissor(); |
| |
| float x = 0.0f; |
| float y = 0.0f; |
| const bool pureTranslate = currentTransform()->isPureTranslate(); |
| if (pureTranslate) { |
| x = (int) floorf(x + currentTransform()->getTranslateX() + 0.5f); |
| y = (int) floorf(y + currentTransform()->getTranslateY() + 0.5f); |
| } |
| |
| FontRenderer& fontRenderer = mCaches.fontRenderer->getFontRenderer(paint); |
| fontRenderer.setFont(paint, mat4::identity()); |
| |
| int alpha; |
| SkXfermode::Mode mode; |
| getAlphaAndMode(paint, &alpha, &mode); |
| |
| if (CC_UNLIKELY(hasTextShadow(paint))) { |
| drawTextShadow(paint, text, bytesCount, count, positions, fontRenderer, |
| alpha, 0.0f, 0.0f); |
| } |
| |
| // Pick the appropriate texture filtering |
| bool linearFilter = currentTransform()->changesBounds(); |
| if (pureTranslate && !linearFilter) { |
| linearFilter = fabs(y - (int) y) > 0.0f || fabs(x - (int) x) > 0.0f; |
| } |
| fontRenderer.setTextureFiltering(linearFilter); |
| |
| const Rect* clip = pureTranslate ? mSnapshot->clipRect : &mSnapshot->getLocalClip(); |
| Rect bounds(FLT_MAX / 2.0f, FLT_MAX / 2.0f, FLT_MIN / 2.0f, FLT_MIN / 2.0f); |
| |
| const bool hasActiveLayer = hasLayer(); |
| |
| TextSetupFunctor functor(this, x, y, pureTranslate, alpha, mode, paint); |
| if (fontRenderer.renderPosText(paint, clip, text, 0, bytesCount, count, x, y, |
| positions, hasActiveLayer ? &bounds : NULL, &functor)) { |
| if (hasActiveLayer) { |
| if (!pureTranslate) { |
| currentTransform()->mapRect(bounds); |
| } |
| dirtyLayerUnchecked(bounds, getRegion()); |
| } |
| } |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| mat4 OpenGLRenderer::findBestFontTransform(const mat4& transform) const { |
| mat4 fontTransform; |
| if (CC_LIKELY(transform.isPureTranslate())) { |
| fontTransform = mat4::identity(); |
| } else { |
| if (CC_UNLIKELY(transform.isPerspective())) { |
| fontTransform = mat4::identity(); |
| } else { |
| float sx, sy; |
| currentTransform()->decomposeScale(sx, sy); |
| fontTransform.loadScale(sx, sy, 1.0f); |
| } |
| } |
| return fontTransform; |
| } |
| |
| status_t OpenGLRenderer::drawText(const char* text, int bytesCount, int count, float x, float y, |
| const float* positions, const SkPaint* paint, float totalAdvance, const Rect& bounds, |
| DrawOpMode drawOpMode) { |
| |
| if (drawOpMode == kDrawOpMode_Immediate) { |
| // The checks for corner-case ignorable text and quick rejection is only done for immediate |
| // drawing as ops from DeferredDisplayList are already filtered for these |
| if (text == NULL || count == 0 || currentSnapshot()->isIgnored() || canSkipText(paint) || |
| quickRejectSetupScissor(bounds)) { |
| return DrawGlInfo::kStatusDone; |
| } |
| } |
| |
| const float oldX = x; |
| const float oldY = y; |
| |
| const mat4& transform = *currentTransform(); |
| const bool pureTranslate = transform.isPureTranslate(); |
| |
| if (CC_LIKELY(pureTranslate)) { |
| x = (int) floorf(x + transform.getTranslateX() + 0.5f); |
| y = (int) floorf(y + transform.getTranslateY() + 0.5f); |
| } |
| |
| int alpha; |
| SkXfermode::Mode mode; |
| getAlphaAndMode(paint, &alpha, &mode); |
| |
| FontRenderer& fontRenderer = mCaches.fontRenderer->getFontRenderer(paint); |
| |
| if (CC_UNLIKELY(hasTextShadow(paint))) { |
| fontRenderer.setFont(paint, mat4::identity()); |
| drawTextShadow(paint, text, bytesCount, count, positions, fontRenderer, |
| alpha, oldX, oldY); |
| } |
| |
| const bool hasActiveLayer = hasLayer(); |
| |
| // We only pass a partial transform to the font renderer. That partial |
| // matrix defines how glyphs are rasterized. Typically we want glyphs |
| // to be rasterized at their final size on screen, which means the partial |
| // matrix needs to take the scale factor into account. |
| // When a partial matrix is used to transform glyphs during rasterization, |
| // the mesh is generated with the inverse transform (in the case of scale, |
| // the mesh is generated at 1.0 / scale for instance.) This allows us to |
| // apply the full transform matrix at draw time in the vertex shader. |
| // Applying the full matrix in the shader is the easiest way to handle |
| // rotation and perspective and allows us to always generated quads in the |
| // font renderer which greatly simplifies the code, clipping in particular. |
| mat4 fontTransform = findBestFontTransform(transform); |
| fontRenderer.setFont(paint, fontTransform); |
| |
| // Pick the appropriate texture filtering |
| bool linearFilter = !pureTranslate || fabs(y - (int) y) > 0.0f || fabs(x - (int) x) > 0.0f; |
| fontRenderer.setTextureFiltering(linearFilter); |
| |
| // TODO: Implement better clipping for scaled/rotated text |
| const Rect* clip = !pureTranslate ? NULL : currentClipRect(); |
| Rect layerBounds(FLT_MAX / 2.0f, FLT_MAX / 2.0f, FLT_MIN / 2.0f, FLT_MIN / 2.0f); |
| |
| bool status; |
| TextSetupFunctor functor(this, x, y, pureTranslate, alpha, mode, paint); |
| |
| // don't call issuedrawcommand, do it at end of batch |
| bool forceFinish = (drawOpMode != kDrawOpMode_Defer); |
| if (CC_UNLIKELY(paint->getTextAlign() != SkPaint::kLeft_Align)) { |
| SkPaint paintCopy(*paint); |
| paintCopy.setTextAlign(SkPaint::kLeft_Align); |
| status = fontRenderer.renderPosText(&paintCopy, clip, text, 0, bytesCount, count, x, y, |
| positions, hasActiveLayer ? &layerBounds : NULL, &functor, forceFinish); |
| } else { |
| status = fontRenderer.renderPosText(paint, clip, text, 0, bytesCount, count, x, y, |
| positions, hasActiveLayer ? &layerBounds : NULL, &functor, forceFinish); |
| } |
| |
| if ((status || drawOpMode != kDrawOpMode_Immediate) && hasActiveLayer) { |
| if (!pureTranslate) { |
| transform.mapRect(layerBounds); |
| } |
| dirtyLayerUnchecked(layerBounds, getRegion()); |
| } |
| |
| drawTextDecorations(totalAdvance, oldX, oldY, paint); |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| status_t OpenGLRenderer::drawTextOnPath(const char* text, int bytesCount, int count, |
| const SkPath* path, float hOffset, float vOffset, const SkPaint* paint) { |
| if (text == NULL || count == 0 || currentSnapshot()->isIgnored() || canSkipText(paint)) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| // TODO: avoid scissor by calculating maximum bounds using path bounds + font metrics |
| mCaches.enableScissor(); |
| |
| FontRenderer& fontRenderer = mCaches.fontRenderer->getFontRenderer(paint); |
| fontRenderer.setFont(paint, mat4::identity()); |
| fontRenderer.setTextureFiltering(true); |
| |
| int alpha; |
| SkXfermode::Mode mode; |
| getAlphaAndMode(paint, &alpha, &mode); |
| TextSetupFunctor functor(this, 0.0f, 0.0f, false, alpha, mode, paint); |
| |
| const Rect* clip = &mSnapshot->getLocalClip(); |
| Rect bounds(FLT_MAX / 2.0f, FLT_MAX / 2.0f, FLT_MIN / 2.0f, FLT_MIN / 2.0f); |
| |
| const bool hasActiveLayer = hasLayer(); |
| |
| if (fontRenderer.renderTextOnPath(paint, clip, text, 0, bytesCount, count, path, |
| hOffset, vOffset, hasActiveLayer ? &bounds : NULL, &functor)) { |
| if (hasActiveLayer) { |
| currentTransform()->mapRect(bounds); |
| dirtyLayerUnchecked(bounds, getRegion()); |
| } |
| } |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| status_t OpenGLRenderer::drawPath(const SkPath* path, const SkPaint* paint) { |
| if (currentSnapshot()->isIgnored()) return DrawGlInfo::kStatusDone; |
| |
| mCaches.activeTexture(0); |
| |
| const PathTexture* texture = mCaches.pathCache.get(path, paint); |
| if (!texture) return DrawGlInfo::kStatusDone; |
| const AutoTexture autoCleanup(texture); |
| |
| const float x = texture->left - texture->offset; |
| const float y = texture->top - texture->offset; |
| |
| drawPathTexture(texture, x, y, paint); |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| status_t OpenGLRenderer::drawLayer(Layer* layer, float x, float y) { |
| if (!layer) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| mat4* transform = NULL; |
| if (layer->isTextureLayer()) { |
| transform = &layer->getTransform(); |
| if (!transform->isIdentity()) { |
| save(SkCanvas::kMatrix_SaveFlag); |
| concatMatrix(*transform); |
| } |
| } |
| |
| bool clipRequired = false; |
| const bool rejected = calculateQuickRejectForScissor(x, y, |
| x + layer->layer.getWidth(), y + layer->layer.getHeight(), &clipRequired, false); |
| |
| if (rejected) { |
| if (transform && !transform->isIdentity()) { |
| restore(); |
| } |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| updateLayer(layer, true); |
| |
| mCaches.setScissorEnabled(mScissorOptimizationDisabled || clipRequired); |
| mCaches.activeTexture(0); |
| |
| if (CC_LIKELY(!layer->region.isEmpty())) { |
| if (layer->region.isRect()) { |
| DRAW_DOUBLE_STENCIL_IF(!layer->hasDrawnSinceUpdate, |
| composeLayerRect(layer, layer->regionRect)); |
| } else if (layer->mesh) { |
| |
| const float a = getLayerAlpha(layer); |
| setupDraw(); |
| setupDrawWithTexture(); |
| setupDrawColor(a, a, a, a); |
| setupDrawColorFilter(layer->getColorFilter()); |
| setupDrawBlending(layer); |
| setupDrawProgram(); |
| setupDrawPureColorUniforms(); |
| setupDrawColorFilterUniforms(layer->getColorFilter()); |
| setupDrawTexture(layer->getTexture()); |
| if (CC_LIKELY(currentTransform()->isPureTranslate())) { |
| int tx = (int) floorf(x + currentTransform()->getTranslateX() + 0.5f); |
| int ty = (int) floorf(y + currentTransform()->getTranslateY() + 0.5f); |
| |
| layer->setFilter(GL_NEAREST); |
| setupDrawModelView(kModelViewMode_Translate, false, tx, ty, |
| tx + layer->layer.getWidth(), ty + layer->layer.getHeight(), true); |
| } else { |
| layer->setFilter(GL_LINEAR); |
| setupDrawModelView(kModelViewMode_Translate, false, x, y, |
| x + layer->layer.getWidth(), y + layer->layer.getHeight()); |
| } |
| |
| TextureVertex* mesh = &layer->mesh[0]; |
| GLsizei elementsCount = layer->meshElementCount; |
| |
| while (elementsCount > 0) { |
| GLsizei drawCount = min(elementsCount, (GLsizei) gMaxNumberOfQuads * 6); |
| |
| setupDrawMeshIndices(&mesh[0].x, &mesh[0].u); |
| DRAW_DOUBLE_STENCIL_IF(!layer->hasDrawnSinceUpdate, |
| glDrawElements(GL_TRIANGLES, drawCount, GL_UNSIGNED_SHORT, NULL)); |
| |
| elementsCount -= drawCount; |
| // Though there are 4 vertices in a quad, we use 6 indices per |
| // quad to draw with GL_TRIANGLES |
| mesh += (drawCount / 6) * 4; |
| } |
| |
| #if DEBUG_LAYERS_AS_REGIONS |
| drawRegionRectsDebug(layer->region); |
| #endif |
| } |
| |
| if (layer->debugDrawUpdate) { |
| layer->debugDrawUpdate = false; |
| |
| SkPaint paint; |
| paint.setColor(0x7f00ff00); |
| drawColorRect(x, y, x + layer->layer.getWidth(), y + layer->layer.getHeight(), &paint); |
| } |
| } |
| layer->hasDrawnSinceUpdate = true; |
| |
| if (transform && !transform->isIdentity()) { |
| restore(); |
| } |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| // Shaders |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void OpenGLRenderer::resetShader() { |
| mDrawModifiers.mShader = NULL; |
| } |
| |
| void OpenGLRenderer::setupShader(SkiaShader* shader) { |
| mDrawModifiers.mShader = shader; |
| if (mDrawModifiers.mShader) { |
| mDrawModifiers.mShader->setCaches(mCaches); |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| // Draw filters |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void OpenGLRenderer::resetPaintFilter() { |
| // when clearing the PaintFilter, the masks should also be cleared for simple DrawModifier |
| // comparison, see MergingDrawBatch::canMergeWith |
| mDrawModifiers.mHasDrawFilter = false; |
| mDrawModifiers.mPaintFilterClearBits = 0; |
| mDrawModifiers.mPaintFilterSetBits = 0; |
| } |
| |
| void OpenGLRenderer::setupPaintFilter(int clearBits, int setBits) { |
| mDrawModifiers.mHasDrawFilter = true; |
| mDrawModifiers.mPaintFilterClearBits = clearBits & SkPaint::kAllFlags; |
| mDrawModifiers.mPaintFilterSetBits = setBits & SkPaint::kAllFlags; |
| } |
| |
| const SkPaint* OpenGLRenderer::filterPaint(const SkPaint* paint) { |
| if (CC_LIKELY(!mDrawModifiers.mHasDrawFilter || !paint)) { |
| return paint; |
| } |
| |
| uint32_t flags = paint->getFlags(); |
| |
| mFilteredPaint = *paint; |
| mFilteredPaint.setFlags((flags & ~mDrawModifiers.mPaintFilterClearBits) | |
| mDrawModifiers.mPaintFilterSetBits); |
| |
| return &mFilteredPaint; |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| // Drawing implementation |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| Texture* OpenGLRenderer::getTexture(const SkBitmap* bitmap) { |
| Texture* texture = mCaches.assetAtlas.getEntryTexture(bitmap); |
| if (!texture) { |
| return mCaches.textureCache.get(bitmap); |
| } |
| return texture; |
| } |
| |
| void OpenGLRenderer::drawPathTexture(const PathTexture* texture, |
| float x, float y, const SkPaint* paint) { |
| if (quickRejectSetupScissor(x, y, x + texture->width, y + texture->height)) { |
| return; |
| } |
| |
| int alpha; |
| SkXfermode::Mode mode; |
| getAlphaAndMode(paint, &alpha, &mode); |
| |
| setupDraw(); |
| setupDrawWithTexture(true); |
| setupDrawAlpha8Color(paint->getColor(), alpha); |
| setupDrawColorFilter(getColorFilter(paint)); |
| setupDrawShader(); |
| setupDrawBlending(paint, true); |
| setupDrawProgram(); |
| setupDrawModelView(kModelViewMode_TranslateAndScale, false, |
| x, y, x + texture->width, y + texture->height); |
| setupDrawTexture(texture->id); |
| setupDrawPureColorUniforms(); |
| setupDrawColorFilterUniforms(getColorFilter(paint)); |
| setupDrawShaderUniforms(); |
| setupDrawMesh(NULL, (GLvoid*) gMeshTextureOffset); |
| |
| glDrawArrays(GL_TRIANGLE_STRIP, 0, gMeshCount); |
| } |
| |
| // Same values used by Skia |
| #define kStdStrikeThru_Offset (-6.0f / 21.0f) |
| #define kStdUnderline_Offset (1.0f / 9.0f) |
| #define kStdUnderline_Thickness (1.0f / 18.0f) |
| |
| void OpenGLRenderer::drawTextDecorations(float underlineWidth, float x, float y, |
| const SkPaint* paint) { |
| // Handle underline and strike-through |
| uint32_t flags = paint->getFlags(); |
| if (flags & (SkPaint::kUnderlineText_Flag | SkPaint::kStrikeThruText_Flag)) { |
| SkPaint paintCopy(*paint); |
| |
| if (CC_LIKELY(underlineWidth > 0.0f)) { |
| const float textSize = paintCopy.getTextSize(); |
| const float strokeWidth = fmax(textSize * kStdUnderline_Thickness, 1.0f); |
| |
| const float left = x; |
| float top = 0.0f; |
| |
| int linesCount = 0; |
| if (flags & SkPaint::kUnderlineText_Flag) linesCount++; |
| if (flags & SkPaint::kStrikeThruText_Flag) linesCount++; |
| |
| const int pointsCount = 4 * linesCount; |
| float points[pointsCount]; |
| int currentPoint = 0; |
| |
| if (flags & SkPaint::kUnderlineText_Flag) { |
| top = y + textSize * kStdUnderline_Offset; |
| points[currentPoint++] = left; |
| points[currentPoint++] = top; |
| points[currentPoint++] = left + underlineWidth; |
| points[currentPoint++] = top; |
| } |
| |
| if (flags & SkPaint::kStrikeThruText_Flag) { |
| top = y + textSize * kStdStrikeThru_Offset; |
| points[currentPoint++] = left; |
| points[currentPoint++] = top; |
| points[currentPoint++] = left + underlineWidth; |
| points[currentPoint++] = top; |
| } |
| |
| paintCopy.setStrokeWidth(strokeWidth); |
| |
| drawLines(&points[0], pointsCount, &paintCopy); |
| } |
| } |
| } |
| |
| status_t OpenGLRenderer::drawRects(const float* rects, int count, const SkPaint* paint) { |
| if (currentSnapshot()->isIgnored()) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| return drawColorRects(rects, count, paint, false, true, true); |
| } |
| |
| static void mapPointFakeZ(Vector3& point, const mat4& transformXY, const mat4& transformZ) { |
| // map z coordinate with true 3d matrix |
| point.z = transformZ.mapZ(point); |
| |
| // map x,y coordinates with draw/Skia matrix |
| transformXY.mapPoint(point.x, point.y); |
| } |
| |
| status_t OpenGLRenderer::drawShadow(const mat4& casterTransformXY, const mat4& casterTransformZ, |
| float casterAlpha, bool casterUnclipped, const SkPath* casterPerimeter) { |
| if (currentSnapshot()->isIgnored()) return DrawGlInfo::kStatusDone; |
| |
| // TODO: use quickRejectWithScissor. For now, always force enable scissor. |
| mCaches.enableScissor(); |
| |
| SkPaint paint; |
| paint.setAntiAlias(true); // want to use AlphaVertex |
| |
| // tessellate caster outline into a 2d polygon |
| Vector<Vertex> casterVertices2d; |
| const float casterRefinementThresholdSquared = 20.0f; // TODO: experiment with this value |
| PathTessellator::approximatePathOutlineVertices(*casterPerimeter, |
| casterRefinementThresholdSquared, casterVertices2d); |
| if (!ShadowTessellator::isClockwisePath(*casterPerimeter)) { |
| ShadowTessellator::reverseVertexArray(casterVertices2d.editArray(), |
| casterVertices2d.size()); |
| } |
| |
| if (casterVertices2d.size() == 0) { |
| // empty caster polygon computed from path |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| // map 2d caster poly into 3d |
| const int casterVertexCount = casterVertices2d.size(); |
| Vector3 casterPolygon[casterVertexCount]; |
| float minZ = FLT_MAX; |
| float maxZ = -FLT_MAX; |
| for (int i = 0; i < casterVertexCount; i++) { |
| const Vertex& point2d = casterVertices2d[i]; |
| casterPolygon[i] = Vector3(point2d.x, point2d.y, 0); |
| mapPointFakeZ(casterPolygon[i], casterTransformXY, casterTransformZ); |
| minZ = fmin(minZ, casterPolygon[i].z); |
| maxZ = fmax(maxZ, casterPolygon[i].z); |
| } |
| |
| // map the centroid of the caster into 3d |
| Vector2 centroid = ShadowTessellator::centroid2d( |
| reinterpret_cast<const Vector2*>(casterVertices2d.array()), |
| casterVertexCount); |
| Vector3 centroid3d(centroid.x, centroid.y, 0); |
| mapPointFakeZ(centroid3d, casterTransformXY, casterTransformZ); |
| |
| // if the caster intersects the z=0 plane, lift it in Z so it doesn't |
| if (minZ < SHADOW_MIN_CASTER_Z) { |
| float casterLift = SHADOW_MIN_CASTER_Z - minZ; |
| for (int i = 0; i < casterVertexCount; i++) { |
| casterPolygon[i].z += casterLift; |
| } |
| centroid3d.z += casterLift; |
| } |
| |
| // Check whether we want to draw the shadow at all by checking the caster's |
| // bounds against clip. |
| // We only have ortho projection, so we can just ignore the Z in caster for |
| // simple rejection calculation. |
| Rect localClip = mSnapshot->getLocalClip(); |
| Rect casterBounds(casterPerimeter->getBounds()); |
| casterTransformXY.mapRect(casterBounds); |
| |
| bool isCasterOpaque = (casterAlpha == 1.0f) && casterUnclipped; |
| // draw caster's shadows |
| if (mCaches.propertyAmbientShadowStrength > 0) { |
| paint.setARGB(casterAlpha * mCaches.propertyAmbientShadowStrength, 0, 0, 0); |
| VertexBuffer ambientShadowVertexBuffer; |
| VertexBufferMode vertexBufferMode = ShadowTessellator::tessellateAmbientShadow( |
| isCasterOpaque, casterPolygon, casterVertexCount, centroid3d, |
| casterBounds, localClip, maxZ, ambientShadowVertexBuffer); |
| drawVertexBuffer(vertexBufferMode, ambientShadowVertexBuffer, &paint); |
| } |
| |
| if (mCaches.propertySpotShadowStrength > 0) { |
| paint.setARGB(casterAlpha * mCaches.propertySpotShadowStrength, 0, 0, 0); |
| VertexBuffer spotShadowVertexBuffer; |
| VertexBufferMode vertexBufferMode = ShadowTessellator::tessellateSpotShadow( |
| isCasterOpaque, casterPolygon, casterVertexCount, |
| *currentTransform(), getWidth(), getHeight(), casterBounds, localClip, |
| spotShadowVertexBuffer); |
| drawVertexBuffer(vertexBufferMode, spotShadowVertexBuffer, &paint); |
| } |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| status_t OpenGLRenderer::drawColorRects(const float* rects, int count, const SkPaint* paint, |
| bool ignoreTransform, bool dirty, bool clip) { |
| if (count == 0) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| int color = paint->getColor(); |
| // If a shader is set, preserve only the alpha |
| if (mDrawModifiers.mShader) { |
| color |= 0x00ffffff; |
| } |
| |
| float left = FLT_MAX; |
| float top = FLT_MAX; |
| float right = FLT_MIN; |
| float bottom = FLT_MIN; |
| |
| Vertex mesh[count]; |
| Vertex* vertex = mesh; |
| |
| for (int index = 0; index < count; index += 4) { |
| float l = rects[index + 0]; |
| float t = rects[index + 1]; |
| float r = rects[index + 2]; |
| float b = rects[index + 3]; |
| |
| Vertex::set(vertex++, l, t); |
| Vertex::set(vertex++, r, t); |
| Vertex::set(vertex++, l, b); |
| Vertex::set(vertex++, r, b); |
| |
| left = fminf(left, l); |
| top = fminf(top, t); |
| right = fmaxf(right, r); |
| bottom = fmaxf(bottom, b); |
| } |
| |
| if (clip && quickRejectSetupScissor(left, top, right, bottom)) { |
| return DrawGlInfo::kStatusDone; |
| } |
| |
| setupDraw(); |
| setupDrawNoTexture(); |
| setupDrawColor(color, ((color >> 24) & 0xFF) * currentSnapshot()->alpha); |
| setupDrawShader(); |
| setupDrawColorFilter(getColorFilter(paint)); |
| setupDrawBlending(paint); |
| setupDrawProgram(); |
| setupDrawDirtyRegionsDisabled(); |
| setupDrawModelView(kModelViewMode_Translate, false, |
| 0.0f, 0.0f, 0.0f, 0.0f, ignoreTransform); |
| setupDrawColorUniforms(); |
| setupDrawShaderUniforms(); |
| setupDrawColorFilterUniforms(getColorFilter(paint)); |
| |
| if (dirty && hasLayer()) { |
| dirtyLayer(left, top, right, bottom, *currentTransform()); |
| } |
| |
| issueIndexedQuadDraw(&mesh[0], count / 4); |
| |
| return DrawGlInfo::kStatusDrew; |
| } |
| |
| void OpenGLRenderer::drawColorRect(float left, float top, float right, float bottom, |
| const SkPaint* paint, bool ignoreTransform) { |
| int color = paint->getColor(); |
| // If a shader is set, preserve only the alpha |
| if (mDrawModifiers.mShader) { |
| color |= 0x00ffffff; |
| } |
| |
| setupDraw(); |
| setupDrawNoTexture(); |
| setupDrawColor(color, ((color >> 24) & 0xFF) * currentSnapshot()->alpha); |
| setupDrawShader(); |
| setupDrawColorFilter(getColorFilter(paint)); |
| setupDrawBlending(paint); |
| setupDrawProgram(); |
| setupDrawModelView(kModelViewMode_TranslateAndScale, false, |
| left, top, right, bottom, ignoreTransform); |
| setupDrawColorUniforms(); |
| setupDrawShaderUniforms(ignoreTransform); |
| setupDrawColorFilterUniforms(getColorFilter(paint)); |
| setupDrawSimpleMesh(); |
| |
| glDrawArrays(GL_TRIANGLE_STRIP, 0, gMeshCount); |
| } |
| |
| void OpenGLRenderer::drawTextureRect(float left, float top, float right, float bottom, |
| Texture* texture, const SkPaint* paint) { |
| texture->setWrap(GL_CLAMP_TO_EDGE, true); |
| |
| GLvoid* vertices = (GLvoid*) NULL; |
| GLvoid* texCoords = (GLvoid*) gMeshTextureOffset; |
| |
| if (texture->uvMapper) { |
| vertices = &mMeshVertices[0].x; |
| texCoords = &mMeshVertices[0].u; |
| |
| Rect uvs(0.0f, 0.0f, 1.0f, 1.0f); |
| texture->uvMapper->map(uvs); |
| |
| resetDrawTextureTexCoords(uvs.left, uvs.top, uvs.right, uvs.bottom); |
| } |
| |
| if (CC_LIKELY(currentTransform()->isPureTranslate())) { |
| const float x = (int) floorf(left + currentTransform()->getTranslateX() + 0.5f); |
| const float y = (int) floorf(top + currentTransform()->getTranslateY() + 0.5f); |
| |
| texture->setFilter(GL_NEAREST, true); |
| drawTextureMesh(x, y, x + texture->width, y + texture->height, texture->id, |
| paint, texture->blend, vertices, texCoords, |
| GL_TRIANGLE_STRIP, gMeshCount, false, true); |
| } else { |
| texture->setFilter(getFilter(paint), true); |
| drawTextureMesh(left, top, right, bottom, texture->id, paint, |
| texture->blend, vertices, texCoords, GL_TRIANGLE_STRIP, gMeshCount); |
| } |
| |
| if (texture->uvMapper) { |
| resetDrawTextureTexCoords(0.0f, 0.0f, 1.0f, 1.0f); |
| } |
| } |
| |
| void OpenGLRenderer::drawTextureMesh(float left, float top, float right, float bottom, |
| GLuint texture, const SkPaint* paint, bool blend, |
| GLvoid* vertices, GLvoid* texCoords, GLenum drawMode, GLsizei elementsCount, |
| bool swapSrcDst, bool ignoreTransform, GLuint vbo, |
| ModelViewMode modelViewMode, bool dirty) { |
| |
| int a; |
| SkXfermode::Mode mode; |
| getAlphaAndMode(paint, &a, &mode); |
| const float alpha = a / 255.0f; |
| |
| setupDraw(); |
| setupDrawWithTexture(); |
| setupDrawColor(alpha, alpha, alpha, alpha); |
| setupDrawColorFilter(getColorFilter(paint)); |
| setupDrawBlending(paint, blend, swapSrcDst); |
| setupDrawProgram(); |
| if (!dirty) setupDrawDirtyRegionsDisabled(); |
| setupDrawModelView(modelViewMode, false, left, top, right, bottom, ignoreTransform); |
| setupDrawTexture(texture); |
| setupDrawPureColorUniforms(); |
| setupDrawColorFilterUniforms(getColorFilter(paint)); |
| setupDrawMesh(vertices, texCoords, vbo); |
| |
| glDrawArrays(drawMode, 0, elementsCount); |
| } |
| |
| void OpenGLRenderer::drawIndexedTextureMesh(float left, float top, float right, float bottom, |
| GLuint texture, const SkPaint* paint, bool blend, |
| GLvoid* vertices, GLvoid* texCoords, GLenum drawMode, GLsizei elementsCount, |
| bool swapSrcDst, bool ignoreTransform, GLuint vbo, |
| ModelViewMode modelViewMode, bool dirty) { |
| |
| int a; |
| SkXfermode::Mode mode; |
| getAlphaAndMode(paint, &a, &mode); |
| const float alpha = a / 255.0f; |
| |
| setupDraw(); |
| setupDrawWithTexture(); |
| setupDrawColor(alpha, alpha, alpha, alpha); |
| setupDrawColorFilter(getColorFilter(paint)); |
| setupDrawBlending(paint, blend, swapSrcDst); |
| setupDrawProgram(); |
| if (!dirty) setupDrawDirtyRegionsDisabled(); |
| setupDrawModelView(modelViewMode, false, left, top, right, bottom, ignoreTransform); |
| setupDrawTexture(texture); |
| setupDrawPureColorUniforms(); |
| setupDrawColorFilterUniforms(getColorFilter(paint)); |
| setupDrawMeshIndices(vertices, texCoords, vbo); |
| |
| glDrawElements(drawMode, elementsCount, GL_UNSIGNED_SHORT, NULL); |
| } |
| |
| void OpenGLRenderer::drawAlpha8TextureMesh(float left, float top, float right, float bottom, |
| GLuint texture, const SkPaint* paint, |
| GLvoid* vertices, GLvoid* texCoords, GLenum drawMode, GLsizei elementsCount, |
| bool ignoreTransform, ModelViewMode modelViewMode, bool dirty) { |
| |
| int color = paint != NULL ? paint->getColor() : 0; |
| int alpha; |
| SkXfermode::Mode mode; |
| getAlphaAndMode(paint, &alpha, &mode); |
| |
| setupDraw(); |
| setupDrawWithTexture(true); |
| if (paint != NULL) { |
| setupDrawAlpha8Color(color, alpha); |
| } |
| setupDrawColorFilter(getColorFilter(paint)); |
| setupDrawShader(); |
| setupDrawBlending(paint, true); |
| setupDrawProgram(); |
| if (!dirty) setupDrawDirtyRegionsDisabled(); |
| setupDrawModelView(modelViewMode, false, left, top, right, bottom, ignoreTransform); |
| setupDrawTexture(texture); |
| setupDrawPureColorUniforms(); |
| setupDrawColorFilterUniforms(getColorFilter(paint)); |
| setupDrawShaderUniforms(ignoreTransform); |
| setupDrawMesh(vertices, texCoords); |
| |
| glDrawArrays(drawMode, 0, elementsCount); |
| } |
| |
| void OpenGLRenderer::chooseBlending(bool blend, SkXfermode::Mode mode, |
| ProgramDescription& description, bool swapSrcDst) { |
| if (mCountOverdraw) { |
| if (!mCaches.blend) glEnable(GL_BLEND); |
| if (mCaches.lastSrcMode != GL_ONE || mCaches.lastDstMode != GL_ONE) { |
| glBlendFunc(GL_ONE, GL_ONE); |
| } |
| |
| mCaches.blend = true; |
| mCaches.lastSrcMode = GL_ONE; |
| mCaches.lastDstMode = GL_ONE; |
| |
| return; |
| } |
| |
| blend = blend || mode != SkXfermode::kSrcOver_Mode; |
| |
| if (blend) { |
| // These blend modes are not supported by OpenGL directly and have |
| // to be implemented using shaders. Since the shader will perform |
| // the blending, turn blending off here |
| // If the blend mode cannot be implemented using shaders, fall |
| // back to the default SrcOver blend mode instead |
| if (CC_UNLIKELY(mode > SkXfermode::kScreen_Mode)) { |
| if (CC_UNLIKELY(mExtensions.hasFramebufferFetch())) { |
| description.framebufferMode = mode; |
| description.swapSrcDst = swapSrcDst; |
| |
| if (mCaches.blend) { |
| glDisable(GL_BLEND); |
| mCaches.blend = false; |
| } |
| |
| return; |
| } else { |
| mode = SkXfermode::kSrcOver_Mode; |
| } |
| } |
| |
| if (!mCaches.blend) { |
| glEnable(GL_BLEND); |
| } |
| |
| GLenum sourceMode = swapSrcDst ? gBlendsSwap[mode].src : gBlends[mode].src; |
| GLenum destMode = swapSrcDst ? gBlendsSwap[mode].dst : gBlends[mode].dst; |
| |
| if (sourceMode != mCaches.lastSrcMode || destMode != mCaches.lastDstMode) { |
| glBlendFunc(sourceMode, destMode); |
| mCaches.lastSrcMode = sourceMode; |
| mCaches.lastDstMode = destMode; |
| } |
| } else if (mCaches.blend) { |
| glDisable(GL_BLEND); |
| } |
| mCaches.blend = blend; |
| } |
| |
| bool OpenGLRenderer::useProgram(Program* program) { |
| if (!program->isInUse()) { |
| if (mCaches.currentProgram != NULL) mCaches.currentProgram->remove(); |
| program->use(); |
| mCaches.currentProgram = program; |
| return false; |
| } |
| return true; |
| } |
| |
| void OpenGLRenderer::resetDrawTextureTexCoords(float u1, float v1, float u2, float v2) { |
| TextureVertex* v = &mMeshVertices[0]; |
| TextureVertex::setUV(v++, u1, v1); |
| TextureVertex::setUV(v++, u2, v1); |
| TextureVertex::setUV(v++, u1, v2); |
| TextureVertex::setUV(v++, u2, v2); |
| } |
| |
| void OpenGLRenderer::getAlphaAndMode(const SkPaint* paint, int* alpha, SkXfermode::Mode* mode) const { |
| getAlphaAndModeDirect(paint, alpha, mode); |
| if (mDrawModifiers.mOverrideLayerAlpha < 1.0f) { |
| // if drawing a layer, ignore the paint's alpha |
| *alpha = mDrawModifiers.mOverrideLayerAlpha * 255; |
| } |
| *alpha *= currentSnapshot()->alpha; |
| } |
| |
| float OpenGLRenderer::getLayerAlpha(const Layer* layer) const { |
| float alpha; |
| if (mDrawModifiers.mOverrideLayerAlpha < 1.0f) { |
| alpha = mDrawModifiers.mOverrideLayerAlpha; |
| } else { |
| alpha = layer->getAlpha() / 255.0f; |
| } |
| return alpha * currentSnapshot()->alpha; |
| } |
| |
| }; // namespace uirenderer |
| }; // namespace android |