| /* |
| * Copyright (C) 2013 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.hardware.camera2; |
| |
| import android.annotation.NonNull; |
| import android.annotation.Nullable; |
| import android.annotation.IntDef; |
| import android.annotation.SystemApi; |
| import android.annotation.TestApi; |
| import static android.hardware.camera2.ICameraDeviceUser.NORMAL_MODE; |
| import static android.hardware.camera2.ICameraDeviceUser.CONSTRAINED_HIGH_SPEED_MODE; |
| import android.hardware.camera2.params.InputConfiguration; |
| import android.hardware.camera2.params.StreamConfigurationMap; |
| import android.hardware.camera2.params.OutputConfiguration; |
| import android.hardware.camera2.params.SessionConfiguration; |
| import android.os.Handler; |
| import android.view.Surface; |
| |
| import java.util.List; |
| import java.util.Set; |
| import java.lang.annotation.Retention; |
| import java.lang.annotation.RetentionPolicy; |
| |
| /** |
| * <p>The CameraDevice class is a representation of a single camera connected to an |
| * Android device, allowing for fine-grain control of image capture and |
| * post-processing at high frame rates.</p> |
| * |
| * <p>Your application must declare the |
| * {@link android.Manifest.permission#CAMERA Camera} permission in its manifest |
| * in order to access camera devices.</p> |
| * |
| * <p>A given camera device may provide support at one of two levels: limited or |
| * full. If a device only supports the limited level, then Camera2 exposes a |
| * feature set that is roughly equivalent to the older |
| * {@link android.hardware.Camera Camera} API, although with a cleaner and more |
| * efficient interface. Devices that implement the full level of support |
| * provide substantially improved capabilities over the older camera |
| * API. Applications that target the limited level devices will run unchanged on |
| * the full-level devices; if your application requires a full-level device for |
| * proper operation, declare the "android.hardware.camera.level.full" feature in your |
| * manifest.</p> |
| * |
| * @see CameraManager#openCamera |
| * @see android.Manifest.permission#CAMERA |
| */ |
| public abstract class CameraDevice implements AutoCloseable { |
| |
| /** |
| * Create a request suitable for a camera preview window. Specifically, this |
| * means that high frame rate is given priority over the highest-quality |
| * post-processing. These requests would normally be used with the |
| * {@link CameraCaptureSession#setRepeatingRequest} method. |
| * This template is guaranteed to be supported on all camera devices. |
| * |
| * @see #createCaptureRequest |
| */ |
| public static final int TEMPLATE_PREVIEW = 1; |
| |
| /** |
| * Create a request suitable for still image capture. Specifically, this |
| * means prioritizing image quality over frame rate. These requests would |
| * commonly be used with the {@link CameraCaptureSession#capture} method. |
| * This template is guaranteed to be supported on all camera devices except |
| * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_DEPTH_OUTPUT DEPTH_OUTPUT} devices |
| * that are not {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE |
| * BACKWARD_COMPATIBLE}. |
| * @see #createCaptureRequest |
| */ |
| public static final int TEMPLATE_STILL_CAPTURE = 2; |
| |
| /** |
| * Create a request suitable for video recording. Specifically, this means |
| * that a stable frame rate is used, and post-processing is set for |
| * recording quality. These requests would commonly be used with the |
| * {@link CameraCaptureSession#setRepeatingRequest} method. |
| * This template is guaranteed to be supported on all camera devices except |
| * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_DEPTH_OUTPUT DEPTH_OUTPUT} devices |
| * that are not {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE |
| * BACKWARD_COMPATIBLE}. |
| * |
| * @see #createCaptureRequest |
| */ |
| public static final int TEMPLATE_RECORD = 3; |
| |
| /** |
| * Create a request suitable for still image capture while recording |
| * video. Specifically, this means maximizing image quality without |
| * disrupting the ongoing recording. These requests would commonly be used |
| * with the {@link CameraCaptureSession#capture} method while a request based on |
| * {@link #TEMPLATE_RECORD} is is in use with {@link CameraCaptureSession#setRepeatingRequest}. |
| * This template is guaranteed to be supported on all camera devices except |
| * legacy devices ({@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL} |
| * {@code == }{@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY LEGACY}) and |
| * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_DEPTH_OUTPUT DEPTH_OUTPUT} devices |
| * that are not {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE |
| * BACKWARD_COMPATIBLE}. |
| * |
| * @see #createCaptureRequest |
| */ |
| public static final int TEMPLATE_VIDEO_SNAPSHOT = 4; |
| |
| /** |
| * Create a request suitable for zero shutter lag still capture. This means |
| * means maximizing image quality without compromising preview frame rate. |
| * AE/AWB/AF should be on auto mode. This is intended for application-operated ZSL. For |
| * device-operated ZSL, use {@link CaptureRequest#CONTROL_ENABLE_ZSL} if available. |
| * This template is guaranteed to be supported on camera devices that support the |
| * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_PRIVATE_REPROCESSING PRIVATE_REPROCESSING} |
| * capability or the |
| * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_YUV_REPROCESSING YUV_REPROCESSING} |
| * capability. |
| * |
| * @see #createCaptureRequest |
| * @see CaptureRequest#CONTROL_ENABLE_ZSL |
| */ |
| public static final int TEMPLATE_ZERO_SHUTTER_LAG = 5; |
| |
| /** |
| * A basic template for direct application control of capture |
| * parameters. All automatic control is disabled (auto-exposure, auto-white |
| * balance, auto-focus), and post-processing parameters are set to preview |
| * quality. The manual capture parameters (exposure, sensitivity, and so on) |
| * are set to reasonable defaults, but should be overriden by the |
| * application depending on the intended use case. |
| * This template is guaranteed to be supported on camera devices that support the |
| * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_MANUAL_SENSOR MANUAL_SENSOR} |
| * capability. |
| * |
| * @see #createCaptureRequest |
| */ |
| public static final int TEMPLATE_MANUAL = 6; |
| |
| /** @hide */ |
| @Retention(RetentionPolicy.SOURCE) |
| @IntDef(prefix = {"TEMPLATE_"}, value = |
| {TEMPLATE_PREVIEW, |
| TEMPLATE_STILL_CAPTURE, |
| TEMPLATE_RECORD, |
| TEMPLATE_VIDEO_SNAPSHOT, |
| TEMPLATE_ZERO_SHUTTER_LAG, |
| TEMPLATE_MANUAL}) |
| public @interface RequestTemplate {}; |
| |
| /** |
| * Get the ID of this camera device. |
| * |
| * <p>This matches the ID given to {@link CameraManager#openCamera} to instantiate this |
| * this camera device.</p> |
| * |
| * <p>This ID can be used to query the camera device's {@link |
| * CameraCharacteristics fixed properties} with {@link |
| * CameraManager#getCameraCharacteristics}.</p> |
| * |
| * <p>This method can be called even if the device has been closed or has encountered |
| * a serious error.</p> |
| * |
| * @return the ID for this camera device |
| * |
| * @see CameraManager#getCameraCharacteristics |
| * @see CameraManager#getCameraIdList |
| */ |
| @NonNull |
| public abstract String getId(); |
| |
| /** |
| * <p>Create a new camera capture session by providing the target output set of Surfaces to the |
| * camera device.</p> |
| * |
| * <p>The active capture session determines the set of potential output Surfaces for |
| * the camera device for each capture request. A given request may use all |
| * or only some of the outputs. Once the CameraCaptureSession is created, requests can be |
| * submitted with {@link CameraCaptureSession#capture capture}, |
| * {@link CameraCaptureSession#captureBurst captureBurst}, |
| * {@link CameraCaptureSession#setRepeatingRequest setRepeatingRequest}, or |
| * {@link CameraCaptureSession#setRepeatingBurst setRepeatingBurst}.</p> |
| * |
| * <p>Surfaces suitable for inclusion as a camera output can be created for |
| * various use cases and targets:</p> |
| * |
| * <ul> |
| * |
| * <li>For drawing to a {@link android.view.SurfaceView SurfaceView}: Once the SurfaceView's |
| * Surface is {@link android.view.SurfaceHolder.Callback#surfaceCreated created}, set the size |
| * of the Surface with {@link android.view.SurfaceHolder#setFixedSize} to be one of the sizes |
| * returned by {@link StreamConfigurationMap#getOutputSizes(Class) |
| * getOutputSizes(SurfaceHolder.class)} and then obtain the Surface by calling {@link |
| * android.view.SurfaceHolder#getSurface}. If the size is not set by the application, it will |
| * be rounded to the nearest supported size less than 1080p, by the camera device.</li> |
| * |
| * <li>For accessing through an OpenGL texture via a {@link android.graphics.SurfaceTexture |
| * SurfaceTexture}: Set the size of the SurfaceTexture with {@link |
| * android.graphics.SurfaceTexture#setDefaultBufferSize} to be one of the sizes returned by |
| * {@link StreamConfigurationMap#getOutputSizes(Class) getOutputSizes(SurfaceTexture.class)} |
| * before creating a Surface from the SurfaceTexture with {@link Surface#Surface}. If the size |
| * is not set by the application, it will be set to be the smallest supported size less than |
| * 1080p, by the camera device.</li> |
| * |
| * <li>For recording with {@link android.media.MediaCodec}: Call |
| * {@link android.media.MediaCodec#createInputSurface} after configuring |
| * the media codec to use one of the sizes returned by |
| * {@link StreamConfigurationMap#getOutputSizes(Class) getOutputSizes(MediaCodec.class)} |
| * </li> |
| * |
| * <li>For recording with {@link android.media.MediaRecorder}: Call |
| * {@link android.media.MediaRecorder#getSurface} after configuring the media recorder to use |
| * one of the sizes returned by |
| * {@link StreamConfigurationMap#getOutputSizes(Class) getOutputSizes(MediaRecorder.class)}, |
| * or configuring it to use one of the supported |
| * {@link android.media.CamcorderProfile CamcorderProfiles}.</li> |
| * |
| * <li>For efficient YUV processing with {@link android.renderscript}: |
| * Create a RenderScript |
| * {@link android.renderscript.Allocation Allocation} with a supported YUV |
| * type, the IO_INPUT flag, and one of the sizes returned by |
| * {@link StreamConfigurationMap#getOutputSizes(Class) getOutputSizes(Allocation.class)}, |
| * Then obtain the Surface with |
| * {@link android.renderscript.Allocation#getSurface}.</li> |
| * |
| * <li>For access to RAW, uncompressed YUV, or compressed JPEG data in the application: Create an |
| * {@link android.media.ImageReader} object with one of the supported output formats given by |
| * {@link StreamConfigurationMap#getOutputFormats()}, setting its size to one of the |
| * corresponding supported sizes by passing the chosen output format into |
| * {@link StreamConfigurationMap#getOutputSizes(int)}. Then obtain a |
| * {@link android.view.Surface} from it with {@link android.media.ImageReader#getSurface()}. |
| * If the ImageReader size is not set to a supported size, it will be rounded to a supported |
| * size less than 1080p by the camera device. |
| * </li> |
| * |
| * </ul> |
| * |
| * <p>The camera device will query each Surface's size and formats upon this |
| * call, so they must be set to a valid setting at this time.</p> |
| * |
| * <p>It can take several hundred milliseconds for the session's configuration to complete, |
| * since camera hardware may need to be powered on or reconfigured. Once the configuration is |
| * complete and the session is ready to actually capture data, the provided |
| * {@link CameraCaptureSession.StateCallback}'s |
| * {@link CameraCaptureSession.StateCallback#onConfigured} callback will be called.</p> |
| * |
| * <p>If a prior CameraCaptureSession already exists when this method is called, the previous |
| * session will no longer be able to accept new capture requests and will be closed. Any |
| * in-progress capture requests made on the prior session will be completed before it's closed. |
| * {@link CameraCaptureSession.StateCallback#onConfigured} for the new session may be invoked |
| * before {@link CameraCaptureSession.StateCallback#onClosed} is invoked for the prior |
| * session. Once the new session is {@link CameraCaptureSession.StateCallback#onConfigured |
| * configured}, it is able to start capturing its own requests. To minimize the transition time, |
| * the {@link CameraCaptureSession#abortCaptures} call can be used to discard the remaining |
| * requests for the prior capture session before a new one is created. Note that once the new |
| * session is created, the old one can no longer have its captures aborted.</p> |
| * |
| * <p>Using larger resolution outputs, or more outputs, can result in slower |
| * output rate from the device.</p> |
| * |
| * <p>Configuring a session with an empty or null list will close the current session, if |
| * any. This can be used to release the current session's target surfaces for another use.</p> |
| * |
| * <p>While any of the sizes from {@link StreamConfigurationMap#getOutputSizes} can be used when |
| * a single output stream is configured, a given camera device may not be able to support all |
| * combination of sizes, formats, and targets when multiple outputs are configured at once. The |
| * tables below list the maximum guaranteed resolutions for combinations of streams and targets, |
| * given the capabilities of the camera device.</p> |
| * |
| * <p>If an application tries to create a session using a set of targets that exceed the limits |
| * described in the below tables, one of three possibilities may occur. First, the session may |
| * be successfully created and work normally. Second, the session may be successfully created, |
| * but the camera device won't meet the frame rate guarantees as described in |
| * {@link StreamConfigurationMap#getOutputMinFrameDuration}. Or third, if the output set |
| * cannot be used at all, session creation will fail entirely, with |
| * {@link CameraCaptureSession.StateCallback#onConfigureFailed} being invoked.</p> |
| * |
| * <p>For the type column, {@code PRIV} refers to any target whose available sizes are found |
| * using {@link StreamConfigurationMap#getOutputSizes(Class)} with no direct application-visible |
| * format, {@code YUV} refers to a target Surface using the |
| * {@link android.graphics.ImageFormat#YUV_420_888} format, {@code JPEG} refers to the |
| * {@link android.graphics.ImageFormat#JPEG} format, and {@code RAW} refers to the |
| * {@link android.graphics.ImageFormat#RAW_SENSOR} format.</p> |
| * |
| * <p>For the maximum size column, {@code PREVIEW} refers to the best size match to the |
| * device's screen resolution, or to 1080p ({@code 1920x1080}), whichever is |
| * smaller. {@code RECORD} refers to the camera device's maximum supported recording resolution, |
| * as determined by {@link android.media.CamcorderProfile}. And {@code MAXIMUM} refers to the |
| * camera device's maximum output resolution for that format or target from |
| * {@link StreamConfigurationMap#getOutputSizes}.</p> |
| * |
| * <p>To use these tables, determine the number and the formats/targets of outputs needed, and |
| * find the row(s) of the table with those targets. The sizes indicate the maximum set of sizes |
| * that can be used; it is guaranteed that for those targets, the listed sizes and anything |
| * smaller from the list given by {@link StreamConfigurationMap#getOutputSizes} can be |
| * successfully used to create a session. For example, if a row indicates that a 8 megapixel |
| * (MP) YUV_420_888 output can be used together with a 2 MP {@code PRIV} output, then a session |
| * can be created with targets {@code [8 MP YUV, 2 MP PRIV]} or targets {@code [2 MP YUV, 2 MP |
| * PRIV]}; but a session with targets {@code [8 MP YUV, 4 MP PRIV]}, targets {@code [4 MP YUV, 4 |
| * MP PRIV]}, or targets {@code [8 MP PRIV, 2 MP YUV]} would not be guaranteed to work, unless |
| * some other row of the table lists such a combination.</p> |
| * |
| * <style scoped> |
| * #rb { border-right-width: thick; } |
| * </style> |
| * <p>Legacy devices ({@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL} |
| * {@code == }{@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY LEGACY}) support at |
| * least the following stream combinations: |
| * |
| * <table> |
| * <tr><th colspan="7">LEGACY-level guaranteed configurations</th></tr> |
| * <tr> <th colspan="2" id="rb">Target 1</th> <th colspan="2" id="rb">Target 2</th> <th colspan="2" id="rb">Target 3</th> <th rowspan="2">Sample use case(s)</th> </tr> |
| * <tr> <th>Type</th><th id="rb">Max size</th> <th>Type</th><th id="rb">Max size</th> <th>Type</th><th id="rb">Max size</th></tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td colspan="2" id="rb"></td> <td>Simple preview, GPU video processing, or no-preview video recording.</td> </tr> |
| * <tr> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td colspan="2" id="rb"></td> <td>No-viewfinder still image capture.</td> </tr> |
| * <tr> <td>{@code YUV }</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td colspan="2" id="rb"></td> <td>In-application video/image processing.</td> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td>Standard still imaging.</td> </tr> |
| * <tr> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td>In-app processing plus still capture.</td> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td colspan="2" id="rb"></td> <td>Standard recording.</td> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td colspan="2" id="rb"></td> <td>Preview plus in-app processing.</td> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>Still capture plus in-app processing.</td> </tr> |
| * </table><br> |
| * </p> |
| * |
| * <p>Limited-level ({@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL} |
| * {@code == }{@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED}) devices |
| * support at least the following stream combinations in addition to those for |
| * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY LEGACY} devices: |
| * |
| * <table> |
| * <tr><th colspan="7">LIMITED-level additional guaranteed configurations</th></tr> |
| * <tr><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th> <th rowspan="2">Sample use case(s)</th> </tr> |
| * <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th></tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code RECORD }</td> <td colspan="2" id="rb"></td> <td>High-resolution video recording with preview.</td> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code RECORD }</td> <td colspan="2" id="rb"></td> <td>High-resolution in-app video processing with preview.</td> </tr> |
| * <tr> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code RECORD }</td> <td colspan="2" id="rb"></td> <td>Two-input in-app video processing.</td> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code RECORD }</td> <td>{@code JPEG}</td><td id="rb">{@code RECORD }</td> <td>High-resolution recording with video snapshot.</td> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code RECORD }</td> <td>{@code JPEG}</td><td id="rb">{@code RECORD }</td> <td>High-resolution in-app processing with video snapshot.</td> </tr> |
| * <tr> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>Two-input in-app processing with still capture.</td> </tr> |
| * </table><br> |
| * </p> |
| * |
| * <p>FULL-level ({@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL} |
| * {@code == }{@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_FULL FULL}) devices |
| * support at least the following stream combinations in addition to those for |
| * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED} devices: |
| * |
| * <table> |
| * <tr><th colspan="7">FULL-level additional guaranteed configurations</th></tr> |
| * <tr><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th> <th rowspan="2">Sample use case(s)</th> </tr> |
| * <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td>Maximum-resolution GPU processing with preview.</td> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td>Maximum-resolution in-app processing with preview.</td> </tr> |
| * <tr> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td>Maximum-resolution two-input in-app processsing.</td> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>Video recording with maximum-size video snapshot</td> </tr> |
| * <tr> <td>{@code YUV }</td><td id="rb">{@code 640x480}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code MAXIMUM}</td> <td>Standard video recording plus maximum-resolution in-app processing.</td> </tr> |
| * <tr> <td>{@code YUV }</td><td id="rb">{@code 640x480}</td> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code MAXIMUM}</td> <td>Preview plus two-input maximum-resolution in-app processing.</td> </tr> |
| * </table><br> |
| * </p> |
| * |
| * <p>RAW-capability ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES} includes |
| * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_RAW RAW}) devices additionally support |
| * at least the following stream combinations on both |
| * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_FULL FULL} and |
| * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED} devices: |
| * |
| * <table> |
| * <tr><th colspan="7">RAW-capability additional guaranteed configurations</th></tr> |
| * <tr><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th> <th rowspan="2">Sample use case(s)</th> </tr> |
| * <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th> </tr> |
| * <tr> <td>{@code RAW }</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td colspan="2" id="rb"></td> <td>No-preview DNG capture.</td> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code RAW }</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td>Standard DNG capture.</td> </tr> |
| * <tr> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code RAW }</td><td id="rb">{@code MAXIMUM}</td> <td colspan="2" id="rb"></td> <td>In-app processing plus DNG capture.</td> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code RAW }</td><td id="rb">{@code MAXIMUM}</td> <td>Video recording with DNG capture.</td> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code RAW }</td><td id="rb">{@code MAXIMUM}</td> <td>Preview with in-app processing and DNG capture.</td> </tr> |
| * <tr> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code RAW }</td><td id="rb">{@code MAXIMUM}</td> <td>Two-input in-app processing plus DNG capture.</td> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code RAW }</td><td id="rb">{@code MAXIMUM}</td> <td>Still capture with simultaneous JPEG and DNG.</td> </tr> |
| * <tr> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code RAW }</td><td id="rb">{@code MAXIMUM}</td> <td>In-app processing with simultaneous JPEG and DNG.</td> </tr> |
| * </table><br> |
| * </p> |
| * |
| * <p>BURST-capability ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES} includes |
| * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_BURST_CAPTURE BURST_CAPTURE}) devices |
| * support at least the below stream combinations in addition to those for |
| * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED} devices. Note that all |
| * FULL-level devices support the BURST capability, and the below list is a strict subset of the |
| * list for FULL-level devices, so this table is only relevant for LIMITED-level devices that |
| * support the BURST_CAPTURE capability. |
| * |
| * <table> |
| * <tr><th colspan="5">BURST-capability additional guaranteed configurations</th></tr> |
| * <tr><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th rowspan="2">Sample use case(s)</th> </tr> |
| * <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code MAXIMUM}</td> <td>Maximum-resolution GPU processing with preview.</td> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code MAXIMUM}</td> <td>Maximum-resolution in-app processing with preview.</td> </tr> |
| * <tr> <td>{@code YUV }</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV }</td><td id="rb">{@code MAXIMUM}</td> <td>Maximum-resolution two-input in-app processsing.</td> </tr> |
| * </table><br> |
| * </p> |
| * |
| * <p>LEVEL-3 ({@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL} |
| * {@code == }{@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_3 LEVEL_3}) |
| * support at least the following stream combinations in addition to the combinations for |
| * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_FULL FULL} and for |
| * RAW capability ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES} includes |
| * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_RAW RAW}): |
| * |
| * <table> |
| * <tr><th colspan="11">LEVEL-3 additional guaranteed configurations</th></tr> |
| * <tr><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th><th colspan="2" id="rb">Target 4</th><th rowspan="2">Sample use case(s)</th> </tr> |
| * <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code 640x480}</td> <td>{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code RAW}</td><td id="rb">{@code MAXIMUM}</td> <td>In-app viewfinder analysis with dynamic selection of output format.</td> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code 640x480}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code RAW}</td><td id="rb">{@code MAXIMUM}</td> <td>In-app viewfinder analysis with dynamic selection of output format.</td> </tr> |
| * </table><br> |
| * </p> |
| * |
| * <p>Since the capabilities of camera devices vary greatly, a given camera device may support |
| * target combinations with sizes outside of these guarantees, but this can only be tested for |
| * by attempting to create a session with such targets.</p> |
| * |
| * @param outputs The new set of Surfaces that should be made available as |
| * targets for captured image data. |
| * @param callback The callback to notify about the status of the new capture session. |
| * @param handler The handler on which the callback should be invoked, or {@code null} to use |
| * the current thread's {@link android.os.Looper looper}. |
| * |
| * @throws IllegalArgumentException if the set of output Surfaces do not meet the requirements, |
| * the callback is null, or the handler is null but the current |
| * thread has no looper. |
| * @throws CameraAccessException if the camera device is no longer connected or has |
| * encountered a fatal error |
| * @throws IllegalStateException if the camera device has been closed |
| * |
| * @see CameraCaptureSession |
| * @see StreamConfigurationMap#getOutputFormats() |
| * @see StreamConfigurationMap#getOutputSizes(int) |
| * @see StreamConfigurationMap#getOutputSizes(Class) |
| */ |
| public abstract void createCaptureSession(@NonNull List<Surface> outputs, |
| @NonNull CameraCaptureSession.StateCallback callback, @Nullable Handler handler) |
| throws CameraAccessException; |
| |
| /** |
| * <p>Create a new camera capture session by providing the target output set of Surfaces and |
| * its corresponding surface configuration to the camera device.</p> |
| * |
| * @see #createCaptureSession |
| * @see OutputConfiguration |
| */ |
| public abstract void createCaptureSessionByOutputConfigurations( |
| List<OutputConfiguration> outputConfigurations, |
| CameraCaptureSession.StateCallback callback, @Nullable Handler handler) |
| throws CameraAccessException; |
| /** |
| * Create a new reprocessable camera capture session by providing the desired reprocessing |
| * input Surface configuration and the target output set of Surfaces to the camera device. |
| * |
| * <p>If a camera device supports YUV reprocessing |
| * ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES_YUV_REPROCESSING}) or PRIVATE |
| * reprocessing |
| * ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES_PRIVATE_REPROCESSING}), besides |
| * the capture session created via {@link #createCaptureSession createCaptureSession}, the |
| * application can also create a reprocessable capture session to submit reprocess capture |
| * requests in addition to regular capture requests. A reprocess capture request takes the next |
| * available buffer from the session's input Surface, and sends it through the camera device's |
| * processing pipeline again, to produce buffers for the request's target output Surfaces. No |
| * new image data is captured for a reprocess request. However the input buffer provided by |
| * the application must be captured previously by the same camera device in the same session |
| * directly (e.g. for Zero-Shutter-Lag use case) or indirectly (e.g. combining multiple output |
| * images).</p> |
| * |
| * <p>The active reprocessable capture session determines an input {@link Surface} and the set |
| * of potential output Surfaces for the camera devices for each capture request. The application |
| * can use {@link #createCaptureRequest createCaptureRequest} to create regular capture requests |
| * to capture new images from the camera device, and use {@link #createReprocessCaptureRequest |
| * createReprocessCaptureRequest} to create reprocess capture requests to process buffers from |
| * the input {@link Surface}. Some combinations of output Surfaces in a session may not be used |
| * in a request simultaneously. The guaranteed combinations of output Surfaces that can be used |
| * in a request simultaneously are listed in the tables under {@link #createCaptureSession |
| * createCaptureSession}. All the output Surfaces in one capture request will come from the |
| * same source, either from a new capture by the camera device, or from the input Surface |
| * depending on if the request is a reprocess capture request.</p> |
| * |
| * <p>Input formats and sizes supported by the camera device can be queried via |
| * {@link StreamConfigurationMap#getInputFormats} and |
| * {@link StreamConfigurationMap#getInputSizes}. For each supported input format, the camera |
| * device supports a set of output formats and sizes for reprocessing that can be queried via |
| * {@link StreamConfigurationMap#getValidOutputFormatsForInput} and |
| * {@link StreamConfigurationMap#getOutputSizes}. While output Surfaces with formats that |
| * aren't valid reprocess output targets for the input configuration can be part of a session, |
| * they cannot be used as targets for a reprocessing request.</p> |
| * |
| * <p>Since the application cannot access {@link android.graphics.ImageFormat#PRIVATE} images |
| * directly, an output Surface created by {@link android.media.ImageReader#newInstance} with |
| * {@link android.graphics.ImageFormat#PRIVATE} as the format will be considered as intended to |
| * be used for reprocessing input and thus the {@link android.media.ImageReader} size must |
| * match one of the supported input sizes for {@link android.graphics.ImageFormat#PRIVATE} |
| * format. Otherwise, creating a reprocessable capture session will fail.</p> |
| * |
| * <p>The guaranteed stream configurations listed in |
| * {@link #createCaptureSession createCaptureSession} are also guaranteed to work for |
| * {@link #createReprocessableCaptureSession createReprocessableCaptureSession}. In addition, |
| * the configurations in the tables below are also guaranteed for creating a reprocessable |
| * capture session if the camera device supports YUV reprocessing or PRIVATE reprocessing. |
| * However, not all output targets used to create a reprocessable session may be used in a |
| * {@link CaptureRequest} simultaneously. For devices that support only 1 output target in a |
| * reprocess {@link CaptureRequest}, submitting a reprocess {@link CaptureRequest} with multiple |
| * output targets will result in a {@link CaptureFailure}. For devices that support multiple |
| * output targets in a reprocess {@link CaptureRequest}, the guaranteed output targets that can |
| * be included in a {@link CaptureRequest} simultaneously are listed in the tables under |
| * {@link #createCaptureSession createCaptureSession}. For example, with a FULL-capability |
| * ({@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL} {@code == } |
| * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_FULL FULL}) device that supports PRIVATE |
| * reprocessing, an application can create a reprocessable capture session with 1 input, |
| * ({@code PRIV}, {@code MAXIMUM}), and 3 outputs, ({@code PRIV}, {@code MAXIMUM}), |
| * ({@code PRIV}, {@code PREVIEW}), and ({@code YUV}, {@code MAXIMUM}). However, it's not |
| * guaranteed that an application can submit a regular or reprocess capture with ({@code PRIV}, |
| * {@code MAXIMUM}) and ({@code YUV}, {@code MAXIMUM}) outputs based on the table listed under |
| * {@link #createCaptureSession createCaptureSession}. In other words, use the tables below to |
| * determine the guaranteed stream configurations for creating a reprocessable capture session, |
| * and use the tables under {@link #createCaptureSession createCaptureSession} to determine the |
| * guaranteed output targets that can be submitted in a regular or reprocess |
| * {@link CaptureRequest} simultaneously.</p> |
| * |
| * <style scoped> |
| * #rb { border-right-width: thick; } |
| * </style> |
| * |
| * <p>LIMITED-level ({@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL} |
| * {@code == }{@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED}) devices |
| * support at least the following stream combinations for creating a reprocessable capture |
| * session in addition to those listed in {@link #createCaptureSession createCaptureSession} for |
| * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED} devices: |
| * |
| * <table> |
| * <tr><th colspan="11">LIMITED-level additional guaranteed configurations for creating a reprocessable capture session<br>({@code PRIV} input is guaranteed only if PRIVATE reprocessing is supported. {@code YUV} input is guaranteed only if YUV reprocessing is supported)</th></tr> |
| * <tr><th colspan="2" id="rb">Input</th><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th><th colspan="2" id="rb">Target 4</th><th rowspan="2">Sample use case(s)</th> </tr> |
| * <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th></tr> |
| * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td></td><td id="rb"></td> <td></td><td id="rb"></td> <td>No-viewfinder still image reprocessing.</td> </tr> |
| * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td></td><td id="rb"></td> <td>ZSL(Zero-Shutter-Lag) still imaging.</td> </tr> |
| * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td></td><td id="rb"></td> <td>ZSL still and in-app processing imaging.</td> </tr> |
| * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>ZSL in-app processing with still capture.</td> </tr> |
| * </table><br> |
| * </p> |
| * |
| * <p>FULL-level ({@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL} |
| * {@code == }{@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_FULL FULL}) devices |
| * support at least the following stream combinations for creating a reprocessable capture |
| * session in addition to those for |
| * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED} devices: |
| * |
| * <table> |
| * <tr><th colspan="11">FULL-level additional guaranteed configurations for creating a reprocessable capture session<br>({@code PRIV} input is guaranteed only if PRIVATE reprocessing is supported. {@code YUV} input is guaranteed only if YUV reprocessing is supported)</th></tr> |
| * <tr><th colspan="2" id="rb">Input</th><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th><th colspan="2" id="rb">Target 4</th><th rowspan="2">Sample use case(s)</th> </tr> |
| * <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th></tr> |
| * <tr> <td>{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td></td><td id="rb"></td> <td></td><td id="rb"></td> <td>Maximum-resolution multi-frame image fusion in-app processing with regular preview.</td> </tr> |
| * <tr> <td>{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td></td><td id="rb"></td> <td></td><td id="rb"></td> <td>Maximum-resolution multi-frame image fusion two-input in-app processing.</td> </tr> |
| * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV}</td><td id="rb">{@code RECORD}</td> <td></td><td id="rb"></td> <td>High-resolution ZSL in-app video processing with regular preview.</td> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td></td><td id="rb"></td> <td>Maximum-resolution ZSL in-app processing with regular preview.</td> </tr> |
| * <tr> <td>{@code PRIV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td></td><td id="rb"></td> <td>Maximum-resolution two-input ZSL in-app processing.</td> </tr> |
| * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>ZSL still capture and in-app processing.</td> </tr> |
| * </table><br> |
| * </p> |
| * |
| * <p>RAW-capability ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES} includes |
| * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_RAW RAW}) devices additionally support |
| * at least the following stream combinations for creating a reprocessable capture session |
| * on both {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_FULL FULL} and |
| * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED LIMITED} devices |
| * |
| * <table> |
| * <tr><th colspan="11">RAW-capability additional guaranteed configurations for creating a reprocessable capture session<br>({@code PRIV} input is guaranteed only if PRIVATE reprocessing is supported. {@code YUV} input is guaranteed only if YUV reprocessing is supported)</th></tr> |
| * <tr><th colspan="2" id="rb">Input</th><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th><th colspan="2" id="rb">Target 4</th><th rowspan="2">Sample use case(s)</th> </tr> |
| * <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th></tr> |
| * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code RAW}</td><td id="rb">{@code MAXIMUM}</td> <td></td><td id="rb"></td> <td>Mutually exclusive ZSL in-app processing and DNG capture.</td> </tr> |
| * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code RAW}</td><td id="rb">{@code MAXIMUM}</td> <td>Mutually exclusive ZSL in-app processing and preview with DNG capture.</td> </tr> |
| * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code RAW}</td><td id="rb">{@code MAXIMUM}</td> <td>Mutually exclusive ZSL two-input in-app processing and DNG capture.</td> </tr> |
| * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code RAW}</td><td id="rb">{@code MAXIMUM}</td> <td>Mutually exclusive ZSL still capture and preview with DNG capture.</td> </tr> |
| * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code RAW}</td><td id="rb">{@code MAXIMUM}</td> <td>Mutually exclusive ZSL in-app processing with still capture and DNG capture.</td> </tr> |
| * </table><br> |
| * </p> |
| * |
| * <p>LEVEL-3 ({@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL} |
| * {@code == }{@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_3 LEVEL_3}) devices |
| * support at least the following stream combinations for creating a reprocessable capture |
| * session in addition to those for |
| * {@link CameraMetadata#INFO_SUPPORTED_HARDWARE_LEVEL_FULL FULL} devices. Note that while |
| * the second configuration allows for configuring {@code MAXIMUM} {@code YUV} and {@code JPEG} |
| * outputs at the same time, that configuration is not listed for regular capture sessions, and |
| * therefore simultaneous output to both targets is not allowed. |
| * |
| * <table> |
| * <tr><th colspan="13">LEVEL-3 additional guaranteed configurations for creating a reprocessable capture session<br>({@code PRIV} input is guaranteed only if PRIVATE reprocessing is supported. {@code YUV} input is always guaranteed.</th></tr> |
| * <tr><th colspan="2" id="rb">Input</th><th colspan="2" id="rb">Target 1</th><th colspan="2" id="rb">Target 2</th><th colspan="2" id="rb">Target 3</th><th colspan="2" id="rb">Target 4</th><th colspan="2" id="rb">Target 5</th><th rowspan="2">Sample use case(s)</th> </tr> |
| * <tr><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th><th>Type</th><th id="rb">Max size</th></tr> |
| * <tr> <td>{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code 640x480}</td> <td>{@code RAW}</td><td id="rb">{@code MAXIMUM}</td> <td></td><td id="rb"></td> <td>In-app viewfinder analysis with ZSL and RAW.</td> </tr> |
| * <tr> <td>{@code PRIV}/{@code YUV}</td><td id="rb">{@code MAXIMUM}</td> <td>Same as input</td><td id="rb">{@code MAXIMUM}</td> <td>{@code PRIV}</td><td id="rb">{@code PREVIEW}</td> <td>{@code PRIV}</td><td id="rb">{@code 640x480}</td> <td>{@code RAW}</td><td id="rb">{@code MAXIMUM}</td> <td>{@code JPEG}</td><td id="rb">{@code MAXIMUM}</td><td>In-app viewfinder analysis with ZSL, RAW, and JPEG reprocessing output.</td> </tr> |
| * </table><br> |
| * </p> |
| * |
| * @param inputConfig The configuration for the input {@link Surface} |
| * @param outputs The new set of Surfaces that should be made available as |
| * targets for captured image data. |
| * @param callback The callback to notify about the status of the new capture session. |
| * @param handler The handler on which the callback should be invoked, or {@code null} to use |
| * the current thread's {@link android.os.Looper looper}. |
| * |
| * @throws IllegalArgumentException if the input configuration is null or not supported, the set |
| * of output Surfaces do not meet the requirements, the |
| * callback is null, or the handler is null but the current |
| * thread has no looper. |
| * @throws CameraAccessException if the camera device is no longer connected or has |
| * encountered a fatal error |
| * @throws IllegalStateException if the camera device has been closed |
| * |
| * @see #createCaptureSession |
| * @see CameraCaptureSession |
| * @see StreamConfigurationMap#getInputFormats |
| * @see StreamConfigurationMap#getInputSizes |
| * @see StreamConfigurationMap#getValidOutputFormatsForInput |
| * @see StreamConfigurationMap#getOutputSizes |
| * @see android.media.ImageWriter |
| * @see android.media.ImageReader |
| */ |
| public abstract void createReprocessableCaptureSession(@NonNull InputConfiguration inputConfig, |
| @NonNull List<Surface> outputs, @NonNull CameraCaptureSession.StateCallback callback, |
| @Nullable Handler handler) |
| throws CameraAccessException; |
| |
| /** |
| * Create a new reprocessable camera capture session by providing the desired reprocessing |
| * input configuration and output {@link OutputConfiguration} |
| * to the camera device. |
| * |
| * @see #createReprocessableCaptureSession |
| * @see OutputConfiguration |
| * |
| */ |
| public abstract void createReprocessableCaptureSessionByConfigurations( |
| @NonNull InputConfiguration inputConfig, |
| @NonNull List<OutputConfiguration> outputs, |
| @NonNull CameraCaptureSession.StateCallback callback, |
| @Nullable Handler handler) |
| throws CameraAccessException; |
| |
| /** |
| * <p>Create a new constrained high speed capture session.</p> |
| * |
| * <p>The application can use normal capture session (created via {@link #createCaptureSession}) |
| * for high speed capture if the desired high speed FPS ranges are advertised by |
| * {@link CameraCharacteristics#CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES}, in which case all API |
| * semantics associated with normal capture sessions applies.</p> |
| * |
| * <p>The method creates a specialized capture session that is only targeted at high speed |
| * video recording (>=120fps) use case if the camera device supports high speed video |
| * capability (i.e., {@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES} contains |
| * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_CONSTRAINED_HIGH_SPEED_VIDEO}). |
| * Therefore, it has special characteristics compared with a normal capture session:</p> |
| * |
| * <ul> |
| * |
| * <li>In addition to the output target Surface requirements specified by the |
| * {@link #createCaptureSession} method, an active high speed capture session will support up |
| * to 2 output Surfaces, though the application might choose to configure just one Surface |
| * (e.g., preview only). All Surfaces must be either video encoder surfaces (acquired by |
| * {@link android.media.MediaRecorder#getSurface} or |
| * {@link android.media.MediaCodec#createInputSurface}) or preview surfaces (obtained from |
| * {@link android.view.SurfaceView}, {@link android.graphics.SurfaceTexture} via |
| * {@link android.view.Surface#Surface(android.graphics.SurfaceTexture)}). The Surface sizes |
| * must be one of the sizes reported by {@link StreamConfigurationMap#getHighSpeedVideoSizes}. |
| * When multiple Surfaces are configured, their size must be same.</li> |
| * |
| * <li>An active high speed capture session only accepts request lists created via |
| * {@link CameraConstrainedHighSpeedCaptureSession#createHighSpeedRequestList}, and the |
| * request list can only be submitted to this session via |
| * {@link CameraCaptureSession#captureBurst captureBurst}, or |
| * {@link CameraCaptureSession#setRepeatingBurst setRepeatingBurst}.</li> |
| * |
| * <li>The FPS ranges being requested to this session must be selected from |
| * {@link StreamConfigurationMap#getHighSpeedVideoFpsRangesFor}. The application can still use |
| * {@link CaptureRequest#CONTROL_AE_TARGET_FPS_RANGE} to control the desired FPS range. |
| * Switching to an FPS range that has different |
| * {@link android.util.Range#getUpper() maximum FPS} may trigger some camera device |
| * reconfigurations, which may introduce extra latency. It is recommended that the |
| * application avoids unnecessary maximum target FPS changes as much as possible during high |
| * speed streaming.</li> |
| * |
| * <li>For the request lists submitted to this session, the camera device will override the |
| * {@link CaptureRequest#CONTROL_MODE control mode}, auto-exposure (AE), auto-white balance |
| * (AWB) and auto-focus (AF) to {@link CameraMetadata#CONTROL_MODE_AUTO}, |
| * {@link CameraMetadata#CONTROL_AE_MODE_ON}, {@link CameraMetadata#CONTROL_AWB_MODE_AUTO} |
| * and {@link CameraMetadata#CONTROL_AF_MODE_CONTINUOUS_VIDEO}, respectively. All |
| * post-processing block mode controls will be overridden to be FAST. Therefore, no manual |
| * control of capture and post-processing parameters is possible. Beside these, only a subset |
| * of controls will work, see |
| * {@link CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_CONSTRAINED_HIGH_SPEED_VIDEO} for |
| * more details.</li> |
| * |
| * </ul> |
| * |
| * @param outputs The new set of Surfaces that should be made available as |
| * targets for captured high speed image data. |
| * @param callback The callback to notify about the status of the new capture session. |
| * @param handler The handler on which the callback should be invoked, or {@code null} to use |
| * the current thread's {@link android.os.Looper looper}. |
| * |
| * @throws IllegalArgumentException if the set of output Surfaces do not meet the requirements, |
| * the callback is null, or the handler is null but the current |
| * thread has no looper, or the camera device doesn't support |
| * high speed video capability. |
| * @throws CameraAccessException if the camera device is no longer connected or has |
| * encountered a fatal error |
| * @throws IllegalStateException if the camera device has been closed |
| * |
| * @see #createCaptureSession |
| * @see CaptureRequest#CONTROL_AE_TARGET_FPS_RANGE |
| * @see StreamConfigurationMap#getHighSpeedVideoSizes |
| * @see StreamConfigurationMap#getHighSpeedVideoFpsRangesFor |
| * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES |
| * @see CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_CONSTRAINED_HIGH_SPEED_VIDEO |
| * @see CameraCaptureSession#captureBurst |
| * @see CameraCaptureSession#setRepeatingBurst |
| * @see CameraConstrainedHighSpeedCaptureSession#createHighSpeedRequestList |
| */ |
| public abstract void createConstrainedHighSpeedCaptureSession(@NonNull List<Surface> outputs, |
| @NonNull CameraCaptureSession.StateCallback callback, |
| @Nullable Handler handler) |
| throws CameraAccessException; |
| |
| /** |
| * Standard camera operation mode. |
| * |
| * @see #createCustomCaptureSession |
| * @hide |
| */ |
| @SystemApi |
| @TestApi |
| public static final int SESSION_OPERATION_MODE_NORMAL = |
| 0; // ICameraDeviceUser.NORMAL_MODE; |
| |
| /** |
| * Constrained high-speed operation mode. |
| * |
| * @see #createCustomCaptureSession |
| * @hide |
| */ |
| @SystemApi |
| @TestApi |
| public static final int SESSION_OPERATION_MODE_CONSTRAINED_HIGH_SPEED = |
| 1; // ICameraDeviceUser.CONSTRAINED_HIGH_SPEED_MODE; |
| |
| /** |
| * First vendor-specific operating mode |
| * |
| * @see #createCustomCaptureSession |
| * @hide |
| */ |
| @SystemApi |
| @TestApi |
| public static final int SESSION_OPERATION_MODE_VENDOR_START = |
| 0x8000; // ICameraDeviceUser.VENDOR_MODE_START; |
| |
| /** @hide */ |
| @Retention(RetentionPolicy.SOURCE) |
| @IntDef(prefix = {"SESSION_OPERATION_MODE"}, value = |
| {SESSION_OPERATION_MODE_NORMAL, |
| SESSION_OPERATION_MODE_CONSTRAINED_HIGH_SPEED, |
| SESSION_OPERATION_MODE_VENDOR_START}) |
| public @interface SessionOperatingMode {}; |
| |
| /** |
| * Create a new camera capture session with a custom operating mode. |
| * |
| * @param inputConfig The configuration for the input {@link Surface} if a reprocessing session |
| * is desired, or {@code null} otherwise. |
| * @param outputs The new set of {@link OutputConfiguration OutputConfigurations} that should be |
| * made available as targets for captured image data. |
| * @param operatingMode The custom operating mode to use; a nonnegative value, either a custom |
| * vendor value or one of the SESSION_OPERATION_MODE_* values. |
| * @param callback The callback to notify about the status of the new capture session. |
| * @param handler The handler on which the callback should be invoked, or {@code null} to use |
| * the current thread's {@link android.os.Looper looper}. |
| * |
| * @throws IllegalArgumentException if the input configuration is null or not supported, the set |
| * of output Surfaces do not meet the requirements, the |
| * callback is null, or the handler is null but the current |
| * thread has no looper. |
| * @throws CameraAccessException if the camera device is no longer connected or has |
| * encountered a fatal error |
| * @throws IllegalStateException if the camera device has been closed |
| * |
| * @see #createCaptureSession |
| * @see #createReprocessableCaptureSession |
| * @see CameraCaptureSession |
| * @see OutputConfiguration |
| * @hide |
| */ |
| @SystemApi |
| @TestApi |
| public abstract void createCustomCaptureSession( |
| InputConfiguration inputConfig, |
| @NonNull List<OutputConfiguration> outputs, |
| @SessionOperatingMode int operatingMode, |
| @NonNull CameraCaptureSession.StateCallback callback, |
| @Nullable Handler handler) |
| throws CameraAccessException; |
| |
| /** |
| * <p>Create a new {@link CameraCaptureSession} using a {@link SessionConfiguration} helper |
| * object that aggregates all supported parameters.</p> |
| * |
| * @param config A session configuration (see {@link SessionConfiguration}). |
| * |
| * @throws IllegalArgumentException In case the session configuration is invalid; or the output |
| * configurations are empty; or the session configuration |
| * executor is invalid. |
| * @throws CameraAccessException In case the camera device is no longer connected or has |
| * encountered a fatal error. |
| * @see #createCaptureSession(List, CameraCaptureSession.StateCallback, Handler) |
| * @see #createCaptureSessionByOutputConfigurations |
| * @see #createReprocessableCaptureSession |
| * @see #createConstrainedHighSpeedCaptureSession |
| */ |
| public void createCaptureSession( |
| SessionConfiguration config) throws CameraAccessException { |
| throw new UnsupportedOperationException("No default implementation"); |
| } |
| |
| /** |
| * <p>Create a {@link CaptureRequest.Builder} for new capture requests, |
| * initialized with template for a target use case. The settings are chosen |
| * to be the best options for the specific camera device, so it is not |
| * recommended to reuse the same request for a different camera device; |
| * create a builder specific for that device and template and override the |
| * settings as desired, instead.</p> |
| * |
| * @param templateType An enumeration selecting the use case for this request. Not all template |
| * types are supported on every device. See the documentation for each template type for |
| * details. |
| * @return a builder for a capture request, initialized with default |
| * settings for that template, and no output streams |
| * |
| * @throws IllegalArgumentException if the templateType is not supported by |
| * this device. |
| * @throws CameraAccessException if the camera device is no longer connected or has |
| * encountered a fatal error |
| * @throws IllegalStateException if the camera device has been closed |
| */ |
| @NonNull |
| public abstract CaptureRequest.Builder createCaptureRequest(@RequestTemplate int templateType) |
| throws CameraAccessException; |
| |
| /** |
| * <p>Create a {@link CaptureRequest.Builder} for new capture requests, |
| * initialized with template for a target use case. This methods allows |
| * clients to pass physical camera ids which can be used to customize the |
| * request for a specific physical camera. The settings are chosen |
| * to be the best options for the specific logical camera device. If |
| * additional physical camera ids are passed, then they will also use the |
| * same settings template. Clients can further modify individual camera |
| * settings by calling {@link CaptureRequest.Builder#setPhysicalCameraKey}.</p> |
| * |
| * <p>Individual physical camera settings will only be honored for camera session |
| * that was initialiazed with corresponding physical camera id output configuration |
| * {@link OutputConfiguration#setPhysicalCameraId} and the same output targets are |
| * also attached in the request by {@link CaptureRequest.Builder#addTarget}.</p> |
| * |
| * <p>The output is undefined for any logical camera streams in case valid physical camera |
| * settings are attached.</p> |
| * |
| * @param templateType An enumeration selecting the use case for this request. Not all template |
| * types are supported on every device. See the documentation for each template type for |
| * details. |
| * @param physicalCameraIdSet A set of physical camera ids that can be used to customize |
| * the request for a specific physical camera. |
| * @return a builder for a capture request, initialized with default |
| * settings for that template, and no output streams |
| * |
| * @throws IllegalArgumentException if the templateType is not supported by |
| * this device, or one of the physical id arguments matches with logical camera id. |
| * @throws CameraAccessException if the camera device is no longer connected or has |
| * encountered a fatal error |
| * @throws IllegalStateException if the camera device has been closed |
| * |
| * @see #TEMPLATE_PREVIEW |
| * @see #TEMPLATE_RECORD |
| * @see #TEMPLATE_STILL_CAPTURE |
| * @see #TEMPLATE_VIDEO_SNAPSHOT |
| * @see #TEMPLATE_MANUAL |
| * @see CaptureRequest.Builder#setPhysicalCameraKey |
| * @see CaptureRequest.Builder#getPhysicalCameraKey |
| */ |
| @NonNull |
| public CaptureRequest.Builder createCaptureRequest(@RequestTemplate int templateType, |
| Set<String> physicalCameraIdSet) throws CameraAccessException { |
| throw new UnsupportedOperationException("Subclasses must override this method"); |
| } |
| |
| /** |
| * <p>Create a {@link CaptureRequest.Builder} for a new reprocess {@link CaptureRequest} from a |
| * {@link TotalCaptureResult}. |
| * |
| * <p>Each reprocess {@link CaptureRequest} processes one buffer from |
| * {@link CameraCaptureSession}'s input {@link Surface} to all output {@link Surface Surfaces} |
| * included in the reprocess capture request. The reprocess input images must be generated from |
| * one or multiple output images captured from the same camera device. The application can |
| * provide input images to camera device via {@link android.media.ImageWriter#queueInputImage}. |
| * The application must use the capture result of one of those output images to create a |
| * reprocess capture request so that the camera device can use the information to achieve |
| * optimal reprocess image quality. For camera devices that support only 1 output |
| * {@link Surface}, submitting a reprocess {@link CaptureRequest} with multiple |
| * output targets will result in a {@link CaptureFailure}. |
| * |
| * @param inputResult The capture result of the output image or one of the output images used |
| * to generate the reprocess input image for this capture request. |
| * |
| * @throws IllegalArgumentException if inputResult is null. |
| * @throws CameraAccessException if the camera device is no longer connected or has |
| * encountered a fatal error |
| * @throws IllegalStateException if the camera device has been closed |
| * |
| * @see CaptureRequest.Builder |
| * @see TotalCaptureResult |
| * @see CameraDevice#createReprocessableCaptureSession |
| * @see android.media.ImageWriter |
| */ |
| @NonNull |
| public abstract CaptureRequest.Builder createReprocessCaptureRequest( |
| @NonNull TotalCaptureResult inputResult) throws CameraAccessException; |
| |
| /** |
| * Close the connection to this camera device as quickly as possible. |
| * |
| * <p>Immediately after this call, all calls to the camera device or active session interface |
| * will throw a {@link IllegalStateException}, except for calls to close(). Once the device has |
| * fully shut down, the {@link StateCallback#onClosed} callback will be called, and the camera |
| * is free to be re-opened.</p> |
| * |
| * <p>Immediately after this call, besides the final {@link StateCallback#onClosed} calls, no |
| * further callbacks from the device or the active session will occur, and any remaining |
| * submitted capture requests will be discarded, as if |
| * {@link CameraCaptureSession#abortCaptures} had been called, except that no success or failure |
| * callbacks will be invoked.</p> |
| * |
| */ |
| @Override |
| public abstract void close(); |
| |
| /** |
| * A callback objects for receiving updates about the state of a camera device. |
| * |
| * <p>A callback instance must be provided to the {@link CameraManager#openCamera} method to |
| * open a camera device.</p> |
| * |
| * <p>These state updates include notifications about the device completing startup ( |
| * allowing for {@link #createCaptureSession} to be called), about device |
| * disconnection or closure, and about unexpected device errors.</p> |
| * |
| * <p>Events about the progress of specific {@link CaptureRequest CaptureRequests} are provided |
| * through a {@link CameraCaptureSession.CaptureCallback} given to the |
| * {@link CameraCaptureSession#capture}, {@link CameraCaptureSession#captureBurst}, |
| * {@link CameraCaptureSession#setRepeatingRequest}, or |
| * {@link CameraCaptureSession#setRepeatingBurst} methods. |
| * |
| * @see CameraManager#openCamera |
| */ |
| public static abstract class StateCallback { |
| /** |
| * An error code that can be reported by {@link #onError} |
| * indicating that the camera device is in use already. |
| * |
| * <p> |
| * This error can be produced when opening the camera fails due to the camera |
| * being used by a higher-priority camera API client. |
| * </p> |
| * |
| * @see #onError |
| */ |
| public static final int ERROR_CAMERA_IN_USE = 1; |
| |
| /** |
| * An error code that can be reported by {@link #onError} |
| * indicating that the camera device could not be opened |
| * because there are too many other open camera devices. |
| * |
| * <p> |
| * The system-wide limit for number of open cameras has been reached, |
| * and more camera devices cannot be opened until previous instances are |
| * closed. |
| * </p> |
| * |
| * <p> |
| * This error can be produced when opening the camera fails. |
| * </p> |
| * |
| * @see #onError |
| */ |
| public static final int ERROR_MAX_CAMERAS_IN_USE = 2; |
| |
| /** |
| * An error code that can be reported by {@link #onError} |
| * indicating that the camera device could not be opened due to a device |
| * policy. |
| * |
| * @see android.app.admin.DevicePolicyManager#setCameraDisabled(android.content.ComponentName, boolean) |
| * @see #onError |
| */ |
| public static final int ERROR_CAMERA_DISABLED = 3; |
| |
| /** |
| * An error code that can be reported by {@link #onError} |
| * indicating that the camera device has encountered a fatal error. |
| * |
| * <p>The camera device needs to be re-opened to be used again.</p> |
| * |
| * @see #onError |
| */ |
| public static final int ERROR_CAMERA_DEVICE = 4; |
| |
| /** |
| * An error code that can be reported by {@link #onError} |
| * indicating that the camera service has encountered a fatal error. |
| * |
| * <p>The Android device may need to be shut down and restarted to restore |
| * camera function, or there may be a persistent hardware problem.</p> |
| * |
| * <p>An attempt at recovery <i>may</i> be possible by closing the |
| * CameraDevice and the CameraManager, and trying to acquire all resources |
| * again from scratch.</p> |
| * |
| * @see #onError |
| */ |
| public static final int ERROR_CAMERA_SERVICE = 5; |
| |
| /** @hide */ |
| @Retention(RetentionPolicy.SOURCE) |
| @IntDef(prefix = {"ERROR_"}, value = |
| {ERROR_CAMERA_IN_USE, |
| ERROR_MAX_CAMERAS_IN_USE, |
| ERROR_CAMERA_DISABLED, |
| ERROR_CAMERA_DEVICE, |
| ERROR_CAMERA_SERVICE }) |
| public @interface ErrorCode {}; |
| |
| /** |
| * The method called when a camera device has finished opening. |
| * |
| * <p>At this point, the camera device is ready to use, and |
| * {@link CameraDevice#createCaptureSession} can be called to set up the first capture |
| * session.</p> |
| * |
| * @param camera the camera device that has become opened |
| */ |
| public abstract void onOpened(@NonNull CameraDevice camera); // Must implement |
| |
| /** |
| * The method called when a camera device has been closed with |
| * {@link CameraDevice#close}. |
| * |
| * <p>Any attempt to call methods on this CameraDevice in the |
| * future will throw a {@link IllegalStateException}.</p> |
| * |
| * <p>The default implementation of this method does nothing.</p> |
| * |
| * @param camera the camera device that has become closed |
| */ |
| public void onClosed(@NonNull CameraDevice camera) { |
| // Default empty implementation |
| } |
| |
| /** |
| * The method called when a camera device is no longer available for |
| * use. |
| * |
| * <p>This callback may be called instead of {@link #onOpened} |
| * if opening the camera fails.</p> |
| * |
| * <p>Any attempt to call methods on this CameraDevice will throw a |
| * {@link CameraAccessException}. The disconnection could be due to a |
| * change in security policy or permissions; the physical disconnection |
| * of a removable camera device; or the camera being needed for a |
| * higher-priority camera API client.</p> |
| * |
| * <p>There may still be capture callbacks that are invoked |
| * after this method is called, or new image buffers that are delivered |
| * to active outputs.</p> |
| * |
| * <p>The default implementation logs a notice to the system log |
| * about the disconnection.</p> |
| * |
| * <p>You should clean up the camera with {@link CameraDevice#close} after |
| * this happens, as it is not recoverable until the camera can be opened |
| * again. For most use cases, this will be when the camera again becomes |
| * {@link CameraManager.AvailabilityCallback#onCameraAvailable available}. |
| * </p> |
| * |
| * @param camera the device that has been disconnected |
| */ |
| public abstract void onDisconnected(@NonNull CameraDevice camera); // Must implement |
| |
| /** |
| * The method called when a camera device has encountered a serious error. |
| * |
| * <p>This callback may be called instead of {@link #onOpened} |
| * if opening the camera fails.</p> |
| * |
| * <p>This indicates a failure of the camera device or camera service in |
| * some way. Any attempt to call methods on this CameraDevice in the |
| * future will throw a {@link CameraAccessException} with the |
| * {@link CameraAccessException#CAMERA_ERROR CAMERA_ERROR} reason. |
| * </p> |
| * |
| * <p>There may still be capture completion or camera stream callbacks |
| * that will be called after this error is received.</p> |
| * |
| * <p>You should clean up the camera with {@link CameraDevice#close} after |
| * this happens. Further attempts at recovery are error-code specific.</p> |
| * |
| * @param camera The device reporting the error |
| * @param error The error code. |
| * |
| * @see #ERROR_CAMERA_IN_USE |
| * @see #ERROR_MAX_CAMERAS_IN_USE |
| * @see #ERROR_CAMERA_DISABLED |
| * @see #ERROR_CAMERA_DEVICE |
| * @see #ERROR_CAMERA_SERVICE |
| */ |
| public abstract void onError(@NonNull CameraDevice camera, |
| @ErrorCode int error); // Must implement |
| } |
| |
| /** |
| * To be inherited by android.hardware.camera2.* code only. |
| * @hide |
| */ |
| public CameraDevice() {} |
| } |