| /* |
| * Copyright (C) 2012 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.hardware.camera2; |
| |
| import android.annotation.NonNull; |
| import android.annotation.Nullable; |
| import android.hardware.camera2.impl.CameraMetadataNative; |
| import android.hardware.camera2.impl.CaptureResultExtras; |
| import android.hardware.camera2.impl.PublicKey; |
| import android.hardware.camera2.impl.SyntheticKey; |
| import android.hardware.camera2.utils.TypeReference; |
| import android.util.Log; |
| import android.util.Rational; |
| |
| import java.util.List; |
| |
| /** |
| * <p>The subset of the results of a single image capture from the image sensor.</p> |
| * |
| * <p>Contains a subset of the final configuration for the capture hardware (sensor, lens, |
| * flash), the processing pipeline, the control algorithms, and the output |
| * buffers.</p> |
| * |
| * <p>CaptureResults are produced by a {@link CameraDevice} after processing a |
| * {@link CaptureRequest}. All properties listed for capture requests can also |
| * be queried on the capture result, to determine the final values used for |
| * capture. The result also includes additional metadata about the state of the |
| * camera device during the capture.</p> |
| * |
| * <p>Not all properties returned by {@link CameraCharacteristics#getAvailableCaptureResultKeys()} |
| * are necessarily available. Some results are {@link CaptureResult partial} and will |
| * not have every key set. Only {@link TotalCaptureResult total} results are guaranteed to have |
| * every key available that was enabled by the request.</p> |
| * |
| * <p>{@link CaptureResult} objects are immutable.</p> |
| * |
| */ |
| public class CaptureResult extends CameraMetadata<CaptureResult.Key<?>> { |
| |
| private static final String TAG = "CaptureResult"; |
| private static final boolean VERBOSE = false; |
| |
| /** |
| * A {@code Key} is used to do capture result field lookups with |
| * {@link CaptureResult#get}. |
| * |
| * <p>For example, to get the timestamp corresponding to the exposure of the first row: |
| * <code><pre> |
| * long timestamp = captureResult.get(CaptureResult.SENSOR_TIMESTAMP); |
| * </pre></code> |
| * </p> |
| * |
| * <p>To enumerate over all possible keys for {@link CaptureResult}, see |
| * {@link CameraCharacteristics#getAvailableCaptureResultKeys}.</p> |
| * |
| * @see CaptureResult#get |
| * @see CameraCharacteristics#getAvailableCaptureResultKeys |
| */ |
| public final static class Key<T> { |
| private final CameraMetadataNative.Key<T> mKey; |
| |
| /** |
| * Visible for testing and vendor extensions only. |
| * |
| * @hide |
| */ |
| public Key(String name, Class<T> type) { |
| mKey = new CameraMetadataNative.Key<T>(name, type); |
| } |
| |
| /** |
| * Visible for testing and vendor extensions only. |
| * |
| * @hide |
| */ |
| public Key(String name, TypeReference<T> typeReference) { |
| mKey = new CameraMetadataNative.Key<T>(name, typeReference); |
| } |
| |
| /** |
| * Return a camelCase, period separated name formatted like: |
| * {@code "root.section[.subsections].name"}. |
| * |
| * <p>Built-in keys exposed by the Android SDK are always prefixed with {@code "android."}; |
| * keys that are device/platform-specific are prefixed with {@code "com."}.</p> |
| * |
| * <p>For example, {@code CameraCharacteristics.SCALER_STREAM_CONFIGURATION_MAP} would |
| * have a name of {@code "android.scaler.streamConfigurationMap"}; whereas a device |
| * specific key might look like {@code "com.google.nexus.data.private"}.</p> |
| * |
| * @return String representation of the key name |
| */ |
| @NonNull |
| public String getName() { |
| return mKey.getName(); |
| } |
| |
| /** |
| * {@inheritDoc} |
| */ |
| @Override |
| public final int hashCode() { |
| return mKey.hashCode(); |
| } |
| |
| /** |
| * {@inheritDoc} |
| */ |
| @SuppressWarnings("unchecked") |
| @Override |
| public final boolean equals(Object o) { |
| return o instanceof Key && ((Key<T>)o).mKey.equals(mKey); |
| } |
| |
| /** |
| * Return this {@link Key} as a string representation. |
| * |
| * <p>{@code "CaptureResult.Key(%s)"}, where {@code %s} represents |
| * the name of this key as returned by {@link #getName}.</p> |
| * |
| * @return string representation of {@link Key} |
| */ |
| @NonNull |
| @Override |
| public String toString() { |
| return String.format("CaptureResult.Key(%s)", mKey.getName()); |
| } |
| |
| /** |
| * Visible for CameraMetadataNative implementation only; do not use. |
| * |
| * TODO: Make this private or remove it altogether. |
| * |
| * @hide |
| */ |
| public CameraMetadataNative.Key<T> getNativeKey() { |
| return mKey; |
| } |
| |
| @SuppressWarnings({ "unchecked" }) |
| /*package*/ Key(CameraMetadataNative.Key<?> nativeKey) { |
| mKey = (CameraMetadataNative.Key<T>) nativeKey; |
| } |
| } |
| |
| private final CameraMetadataNative mResults; |
| private final CaptureRequest mRequest; |
| private final int mSequenceId; |
| private final long mFrameNumber; |
| |
| /** |
| * Takes ownership of the passed-in properties object |
| * |
| * <p>For internal use only</p> |
| * @hide |
| */ |
| public CaptureResult(CameraMetadataNative results, CaptureRequest parent, |
| CaptureResultExtras extras) { |
| if (results == null) { |
| throw new IllegalArgumentException("results was null"); |
| } |
| |
| if (parent == null) { |
| throw new IllegalArgumentException("parent was null"); |
| } |
| |
| if (extras == null) { |
| throw new IllegalArgumentException("extras was null"); |
| } |
| |
| mResults = CameraMetadataNative.move(results); |
| if (mResults.isEmpty()) { |
| throw new AssertionError("Results must not be empty"); |
| } |
| mRequest = parent; |
| mSequenceId = extras.getRequestId(); |
| mFrameNumber = extras.getFrameNumber(); |
| } |
| |
| /** |
| * Returns a copy of the underlying {@link CameraMetadataNative}. |
| * @hide |
| */ |
| public CameraMetadataNative getNativeCopy() { |
| return new CameraMetadataNative(mResults); |
| } |
| |
| /** |
| * Creates a request-less result. |
| * |
| * <p><strong>For testing only.</strong></p> |
| * @hide |
| */ |
| public CaptureResult(CameraMetadataNative results, int sequenceId) { |
| if (results == null) { |
| throw new IllegalArgumentException("results was null"); |
| } |
| |
| mResults = CameraMetadataNative.move(results); |
| if (mResults.isEmpty()) { |
| throw new AssertionError("Results must not be empty"); |
| } |
| |
| mRequest = null; |
| mSequenceId = sequenceId; |
| mFrameNumber = -1; |
| } |
| |
| /** |
| * Get a capture result field value. |
| * |
| * <p>The field definitions can be found in {@link CaptureResult}.</p> |
| * |
| * <p>Querying the value for the same key more than once will return a value |
| * which is equal to the previous queried value.</p> |
| * |
| * @throws IllegalArgumentException if the key was not valid |
| * |
| * @param key The result field to read. |
| * @return The value of that key, or {@code null} if the field is not set. |
| */ |
| @Nullable |
| public <T> T get(Key<T> key) { |
| T value = mResults.get(key); |
| if (VERBOSE) Log.v(TAG, "#get for Key = " + key.getName() + ", returned value = " + value); |
| return value; |
| } |
| |
| /** |
| * {@inheritDoc} |
| * @hide |
| */ |
| @SuppressWarnings("unchecked") |
| @Override |
| protected <T> T getProtected(Key<?> key) { |
| return (T) mResults.get(key); |
| } |
| |
| /** |
| * {@inheritDoc} |
| * @hide |
| */ |
| @SuppressWarnings("unchecked") |
| @Override |
| protected Class<Key<?>> getKeyClass() { |
| Object thisClass = Key.class; |
| return (Class<Key<?>>)thisClass; |
| } |
| |
| /** |
| * Dumps the native metadata contents to logcat. |
| * |
| * <p>Visibility for testing/debugging only. The results will not |
| * include any synthesized keys, as they are invisible to the native layer.</p> |
| * |
| * @hide |
| */ |
| public void dumpToLog() { |
| mResults.dumpToLog(); |
| } |
| |
| /** |
| * {@inheritDoc} |
| */ |
| @Override |
| @NonNull |
| public List<Key<?>> getKeys() { |
| // Force the javadoc for this function to show up on the CaptureResult page |
| return super.getKeys(); |
| } |
| |
| /** |
| * Get the request associated with this result. |
| * |
| * <p>Whenever a request has been fully or partially captured, with |
| * {@link CameraCaptureSession.CaptureCallback#onCaptureCompleted} or |
| * {@link CameraCaptureSession.CaptureCallback#onCaptureProgressed}, the {@code result}'s |
| * {@code getRequest()} will return that {@code request}. |
| * </p> |
| * |
| * <p>For example, |
| * <code><pre>cameraDevice.capture(someRequest, new CaptureCallback() { |
| * {@literal @}Override |
| * void onCaptureCompleted(CaptureRequest myRequest, CaptureResult myResult) { |
| * assert(myResult.getRequest.equals(myRequest) == true); |
| * } |
| * }, null); |
| * </code></pre> |
| * </p> |
| * |
| * @return The request associated with this result. Never {@code null}. |
| */ |
| @NonNull |
| public CaptureRequest getRequest() { |
| return mRequest; |
| } |
| |
| /** |
| * Get the frame number associated with this result. |
| * |
| * <p>Whenever a request has been processed, regardless of failure or success, |
| * it gets a unique frame number assigned to its future result/failure.</p> |
| * |
| * <p>For the same type of request (capturing from the camera device or reprocessing), this |
| * value monotonically increments, starting with 0, for every new result or failure and the |
| * scope is the lifetime of the {@link CameraDevice}. Between different types of requests, |
| * the frame number may not monotonically increment. For example, the frame number of a newer |
| * reprocess result may be smaller than the frame number of an older result of capturing new |
| * images from the camera device, but the frame number of a newer reprocess result will never be |
| * smaller than the frame number of an older reprocess result.</p> |
| * |
| * @return The frame number |
| * |
| * @see CameraDevice#createCaptureRequest |
| * @see CameraDevice#createReprocessCaptureRequest |
| */ |
| public long getFrameNumber() { |
| return mFrameNumber; |
| } |
| |
| /** |
| * The sequence ID for this failure that was returned by the |
| * {@link CameraCaptureSession#capture} family of functions. |
| * |
| * <p>The sequence ID is a unique monotonically increasing value starting from 0, |
| * incremented every time a new group of requests is submitted to the CameraDevice.</p> |
| * |
| * @return int The ID for the sequence of requests that this capture result is a part of |
| * |
| * @see CameraDevice.CaptureCallback#onCaptureSequenceCompleted |
| * @see CameraDevice.CaptureCallback#onCaptureSequenceAborted |
| */ |
| public int getSequenceId() { |
| return mSequenceId; |
| } |
| |
| /*@O~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~ |
| * The key entries below this point are generated from metadata |
| * definitions in /system/media/camera/docs. Do not modify by hand or |
| * modify the comment blocks at the start or end. |
| *~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~*/ |
| |
| /** |
| * <p>The mode control selects how the image data is converted from the |
| * sensor's native color into linear sRGB color.</p> |
| * <p>When auto-white balance (AWB) is enabled with {@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode}, this |
| * control is overridden by the AWB routine. When AWB is disabled, the |
| * application controls how the color mapping is performed.</p> |
| * <p>We define the expected processing pipeline below. For consistency |
| * across devices, this is always the case with TRANSFORM_MATRIX.</p> |
| * <p>When either FULL or HIGH_QUALITY is used, the camera device may |
| * do additional processing but {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} and |
| * {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} will still be provided by the |
| * camera device (in the results) and be roughly correct.</p> |
| * <p>Switching to TRANSFORM_MATRIX and using the data provided from |
| * FAST or HIGH_QUALITY will yield a picture with the same white point |
| * as what was produced by the camera device in the earlier frame.</p> |
| * <p>The expected processing pipeline is as follows:</p> |
| * <p><img alt="White balance processing pipeline" src="../../../../images/camera2/metadata/android.colorCorrection.mode/processing_pipeline.png" /></p> |
| * <p>The white balance is encoded by two values, a 4-channel white-balance |
| * gain vector (applied in the Bayer domain), and a 3x3 color transform |
| * matrix (applied after demosaic).</p> |
| * <p>The 4-channel white-balance gains are defined as:</p> |
| * <pre><code>{@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} = [ R G_even G_odd B ] |
| * </code></pre> |
| * <p>where <code>G_even</code> is the gain for green pixels on even rows of the |
| * output, and <code>G_odd</code> is the gain for green pixels on the odd rows. |
| * These may be identical for a given camera device implementation; if |
| * the camera device does not support a separate gain for even/odd green |
| * channels, it will use the <code>G_even</code> value, and write <code>G_odd</code> equal to |
| * <code>G_even</code> in the output result metadata.</p> |
| * <p>The matrices for color transforms are defined as a 9-entry vector:</p> |
| * <pre><code>{@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} = [ I0 I1 I2 I3 I4 I5 I6 I7 I8 ] |
| * </code></pre> |
| * <p>which define a transform from input sensor colors, <code>P_in = [ r g b ]</code>, |
| * to output linear sRGB, <code>P_out = [ r' g' b' ]</code>,</p> |
| * <p>with colors as follows:</p> |
| * <pre><code>r' = I0r + I1g + I2b |
| * g' = I3r + I4g + I5b |
| * b' = I6r + I7g + I8b |
| * </code></pre> |
| * <p>Both the input and output value ranges must match. Overflow/underflow |
| * values are clipped to fit within the range.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #COLOR_CORRECTION_MODE_TRANSFORM_MATRIX TRANSFORM_MATRIX}</li> |
| * <li>{@link #COLOR_CORRECTION_MODE_FAST FAST}</li> |
| * <li>{@link #COLOR_CORRECTION_MODE_HIGH_QUALITY HIGH_QUALITY}</li> |
| * </ul></p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CaptureRequest#COLOR_CORRECTION_GAINS |
| * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM |
| * @see CaptureRequest#CONTROL_AWB_MODE |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see #COLOR_CORRECTION_MODE_TRANSFORM_MATRIX |
| * @see #COLOR_CORRECTION_MODE_FAST |
| * @see #COLOR_CORRECTION_MODE_HIGH_QUALITY |
| */ |
| @PublicKey |
| public static final Key<Integer> COLOR_CORRECTION_MODE = |
| new Key<Integer>("android.colorCorrection.mode", int.class); |
| |
| /** |
| * <p>A color transform matrix to use to transform |
| * from sensor RGB color space to output linear sRGB color space.</p> |
| * <p>This matrix is either set by the camera device when the request |
| * {@link CaptureRequest#COLOR_CORRECTION_MODE android.colorCorrection.mode} is not TRANSFORM_MATRIX, or |
| * directly by the application in the request when the |
| * {@link CaptureRequest#COLOR_CORRECTION_MODE android.colorCorrection.mode} is TRANSFORM_MATRIX.</p> |
| * <p>In the latter case, the camera device may round the matrix to account |
| * for precision issues; the final rounded matrix should be reported back |
| * in this matrix result metadata. The transform should keep the magnitude |
| * of the output color values within <code>[0, 1.0]</code> (assuming input color |
| * values is within the normalized range <code>[0, 1.0]</code>), or clipping may occur.</p> |
| * <p>The valid range of each matrix element varies on different devices, but |
| * values within [-1.5, 3.0] are guaranteed not to be clipped.</p> |
| * <p><b>Units</b>: Unitless scale factors</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CaptureRequest#COLOR_CORRECTION_MODE |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| */ |
| @PublicKey |
| public static final Key<android.hardware.camera2.params.ColorSpaceTransform> COLOR_CORRECTION_TRANSFORM = |
| new Key<android.hardware.camera2.params.ColorSpaceTransform>("android.colorCorrection.transform", android.hardware.camera2.params.ColorSpaceTransform.class); |
| |
| /** |
| * <p>Gains applying to Bayer raw color channels for |
| * white-balance.</p> |
| * <p>These per-channel gains are either set by the camera device |
| * when the request {@link CaptureRequest#COLOR_CORRECTION_MODE android.colorCorrection.mode} is not |
| * TRANSFORM_MATRIX, or directly by the application in the |
| * request when the {@link CaptureRequest#COLOR_CORRECTION_MODE android.colorCorrection.mode} is |
| * TRANSFORM_MATRIX.</p> |
| * <p>The gains in the result metadata are the gains actually |
| * applied by the camera device to the current frame.</p> |
| * <p>The valid range of gains varies on different devices, but gains |
| * between [1.0, 3.0] are guaranteed not to be clipped. Even if a given |
| * device allows gains below 1.0, this is usually not recommended because |
| * this can create color artifacts.</p> |
| * <p><b>Units</b>: Unitless gain factors</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CaptureRequest#COLOR_CORRECTION_MODE |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| */ |
| @PublicKey |
| public static final Key<android.hardware.camera2.params.RggbChannelVector> COLOR_CORRECTION_GAINS = |
| new Key<android.hardware.camera2.params.RggbChannelVector>("android.colorCorrection.gains", android.hardware.camera2.params.RggbChannelVector.class); |
| |
| /** |
| * <p>Mode of operation for the chromatic aberration correction algorithm.</p> |
| * <p>Chromatic (color) aberration is caused by the fact that different wavelengths of light |
| * can not focus on the same point after exiting from the lens. This metadata defines |
| * the high level control of chromatic aberration correction algorithm, which aims to |
| * minimize the chromatic artifacts that may occur along the object boundaries in an |
| * image.</p> |
| * <p>FAST/HIGH_QUALITY both mean that camera device determined aberration |
| * correction will be applied. HIGH_QUALITY mode indicates that the camera device will |
| * use the highest-quality aberration correction algorithms, even if it slows down |
| * capture rate. FAST means the camera device will not slow down capture rate when |
| * applying aberration correction.</p> |
| * <p>LEGACY devices will always be in FAST mode.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #COLOR_CORRECTION_ABERRATION_MODE_OFF OFF}</li> |
| * <li>{@link #COLOR_CORRECTION_ABERRATION_MODE_FAST FAST}</li> |
| * <li>{@link #COLOR_CORRECTION_ABERRATION_MODE_HIGH_QUALITY HIGH_QUALITY}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br> |
| * {@link CameraCharacteristics#COLOR_CORRECTION_AVAILABLE_ABERRATION_MODES android.colorCorrection.availableAberrationModes}</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CameraCharacteristics#COLOR_CORRECTION_AVAILABLE_ABERRATION_MODES |
| * @see #COLOR_CORRECTION_ABERRATION_MODE_OFF |
| * @see #COLOR_CORRECTION_ABERRATION_MODE_FAST |
| * @see #COLOR_CORRECTION_ABERRATION_MODE_HIGH_QUALITY |
| */ |
| @PublicKey |
| public static final Key<Integer> COLOR_CORRECTION_ABERRATION_MODE = |
| new Key<Integer>("android.colorCorrection.aberrationMode", int.class); |
| |
| /** |
| * <p>The desired setting for the camera device's auto-exposure |
| * algorithm's antibanding compensation.</p> |
| * <p>Some kinds of lighting fixtures, such as some fluorescent |
| * lights, flicker at the rate of the power supply frequency |
| * (60Hz or 50Hz, depending on country). While this is |
| * typically not noticeable to a person, it can be visible to |
| * a camera device. If a camera sets its exposure time to the |
| * wrong value, the flicker may become visible in the |
| * viewfinder as flicker or in a final captured image, as a |
| * set of variable-brightness bands across the image.</p> |
| * <p>Therefore, the auto-exposure routines of camera devices |
| * include antibanding routines that ensure that the chosen |
| * exposure value will not cause such banding. The choice of |
| * exposure time depends on the rate of flicker, which the |
| * camera device can detect automatically, or the expected |
| * rate can be selected by the application using this |
| * control.</p> |
| * <p>A given camera device may not support all of the possible |
| * options for the antibanding mode. The |
| * {@link CameraCharacteristics#CONTROL_AE_AVAILABLE_ANTIBANDING_MODES android.control.aeAvailableAntibandingModes} key contains |
| * the available modes for a given camera device.</p> |
| * <p>AUTO mode is the default if it is available on given |
| * camera device. When AUTO mode is not available, the |
| * default will be either 50HZ or 60HZ, and both 50HZ |
| * and 60HZ will be available.</p> |
| * <p>If manual exposure control is enabled (by setting |
| * {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} or {@link CaptureRequest#CONTROL_MODE android.control.mode} to OFF), |
| * then this setting has no effect, and the application must |
| * ensure it selects exposure times that do not cause banding |
| * issues. The {@link CaptureResult#STATISTICS_SCENE_FLICKER android.statistics.sceneFlicker} key can assist |
| * the application in this.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #CONTROL_AE_ANTIBANDING_MODE_OFF OFF}</li> |
| * <li>{@link #CONTROL_AE_ANTIBANDING_MODE_50HZ 50HZ}</li> |
| * <li>{@link #CONTROL_AE_ANTIBANDING_MODE_60HZ 60HZ}</li> |
| * <li>{@link #CONTROL_AE_ANTIBANDING_MODE_AUTO AUTO}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br></p> |
| * <p>{@link CameraCharacteristics#CONTROL_AE_AVAILABLE_ANTIBANDING_MODES android.control.aeAvailableAntibandingModes}</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CameraCharacteristics#CONTROL_AE_AVAILABLE_ANTIBANDING_MODES |
| * @see CaptureRequest#CONTROL_AE_MODE |
| * @see CaptureRequest#CONTROL_MODE |
| * @see CaptureResult#STATISTICS_SCENE_FLICKER |
| * @see #CONTROL_AE_ANTIBANDING_MODE_OFF |
| * @see #CONTROL_AE_ANTIBANDING_MODE_50HZ |
| * @see #CONTROL_AE_ANTIBANDING_MODE_60HZ |
| * @see #CONTROL_AE_ANTIBANDING_MODE_AUTO |
| */ |
| @PublicKey |
| public static final Key<Integer> CONTROL_AE_ANTIBANDING_MODE = |
| new Key<Integer>("android.control.aeAntibandingMode", int.class); |
| |
| /** |
| * <p>Adjustment to auto-exposure (AE) target image |
| * brightness.</p> |
| * <p>The adjustment is measured as a count of steps, with the |
| * step size defined by {@link CameraCharacteristics#CONTROL_AE_COMPENSATION_STEP android.control.aeCompensationStep} and the |
| * allowed range by {@link CameraCharacteristics#CONTROL_AE_COMPENSATION_RANGE android.control.aeCompensationRange}.</p> |
| * <p>For example, if the exposure value (EV) step is 0.333, '6' |
| * will mean an exposure compensation of +2 EV; -3 will mean an |
| * exposure compensation of -1 EV. One EV represents a doubling |
| * of image brightness. Note that this control will only be |
| * effective if {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} <code>!=</code> OFF. This control |
| * will take effect even when {@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock} <code>== true</code>.</p> |
| * <p>In the event of exposure compensation value being changed, camera device |
| * may take several frames to reach the newly requested exposure target. |
| * During that time, {@link CaptureResult#CONTROL_AE_STATE android.control.aeState} field will be in the SEARCHING |
| * state. Once the new exposure target is reached, {@link CaptureResult#CONTROL_AE_STATE android.control.aeState} will |
| * change from SEARCHING to either CONVERGED, LOCKED (if AE lock is enabled), or |
| * FLASH_REQUIRED (if the scene is too dark for still capture).</p> |
| * <p><b>Units</b>: Compensation steps</p> |
| * <p><b>Range of valid values:</b><br> |
| * {@link CameraCharacteristics#CONTROL_AE_COMPENSATION_RANGE android.control.aeCompensationRange}</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CameraCharacteristics#CONTROL_AE_COMPENSATION_RANGE |
| * @see CameraCharacteristics#CONTROL_AE_COMPENSATION_STEP |
| * @see CaptureRequest#CONTROL_AE_LOCK |
| * @see CaptureRequest#CONTROL_AE_MODE |
| * @see CaptureResult#CONTROL_AE_STATE |
| */ |
| @PublicKey |
| public static final Key<Integer> CONTROL_AE_EXPOSURE_COMPENSATION = |
| new Key<Integer>("android.control.aeExposureCompensation", int.class); |
| |
| /** |
| * <p>Whether auto-exposure (AE) is currently locked to its latest |
| * calculated values.</p> |
| * <p>When set to <code>true</code> (ON), the AE algorithm is locked to its latest parameters, |
| * and will not change exposure settings until the lock is set to <code>false</code> (OFF).</p> |
| * <p>Note that even when AE is locked, the flash may be fired if |
| * the {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} is ON_AUTO_FLASH / |
| * ON_ALWAYS_FLASH / ON_AUTO_FLASH_REDEYE.</p> |
| * <p>When {@link CaptureRequest#CONTROL_AE_EXPOSURE_COMPENSATION android.control.aeExposureCompensation} is changed, even if the AE lock |
| * is ON, the camera device will still adjust its exposure value.</p> |
| * <p>If AE precapture is triggered (see {@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger}) |
| * when AE is already locked, the camera device will not change the exposure time |
| * ({@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime}) and sensitivity ({@link CaptureRequest#SENSOR_SENSITIVITY android.sensor.sensitivity}) |
| * parameters. The flash may be fired if the {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} |
| * is ON_AUTO_FLASH/ON_AUTO_FLASH_REDEYE and the scene is too dark. If the |
| * {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} is ON_ALWAYS_FLASH, the scene may become overexposed. |
| * Similarly, AE precapture trigger CANCEL has no effect when AE is already locked.</p> |
| * <p>When an AE precapture sequence is triggered, AE unlock will not be able to unlock |
| * the AE if AE is locked by the camera device internally during precapture metering |
| * sequence In other words, submitting requests with AE unlock has no effect for an |
| * ongoing precapture metering sequence. Otherwise, the precapture metering sequence |
| * will never succeed in a sequence of preview requests where AE lock is always set |
| * to <code>false</code>.</p> |
| * <p>Since the camera device has a pipeline of in-flight requests, the settings that |
| * get locked do not necessarily correspond to the settings that were present in the |
| * latest capture result received from the camera device, since additional captures |
| * and AE updates may have occurred even before the result was sent out. If an |
| * application is switching between automatic and manual control and wishes to eliminate |
| * any flicker during the switch, the following procedure is recommended:</p> |
| * <ol> |
| * <li>Starting in auto-AE mode:</li> |
| * <li>Lock AE</li> |
| * <li>Wait for the first result to be output that has the AE locked</li> |
| * <li>Copy exposure settings from that result into a request, set the request to manual AE</li> |
| * <li>Submit the capture request, proceed to run manual AE as desired.</li> |
| * </ol> |
| * <p>See {@link CaptureResult#CONTROL_AE_STATE android.control.aeState} for AE lock related state transition details.</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CaptureRequest#CONTROL_AE_EXPOSURE_COMPENSATION |
| * @see CaptureRequest#CONTROL_AE_MODE |
| * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER |
| * @see CaptureResult#CONTROL_AE_STATE |
| * @see CaptureRequest#SENSOR_EXPOSURE_TIME |
| * @see CaptureRequest#SENSOR_SENSITIVITY |
| */ |
| @PublicKey |
| public static final Key<Boolean> CONTROL_AE_LOCK = |
| new Key<Boolean>("android.control.aeLock", boolean.class); |
| |
| /** |
| * <p>The desired mode for the camera device's |
| * auto-exposure routine.</p> |
| * <p>This control is only effective if {@link CaptureRequest#CONTROL_MODE android.control.mode} is |
| * AUTO.</p> |
| * <p>When set to any of the ON modes, the camera device's |
| * auto-exposure routine is enabled, overriding the |
| * application's selected exposure time, sensor sensitivity, |
| * and frame duration ({@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime}, |
| * {@link CaptureRequest#SENSOR_SENSITIVITY android.sensor.sensitivity}, and |
| * {@link CaptureRequest#SENSOR_FRAME_DURATION android.sensor.frameDuration}). If one of the FLASH modes |
| * is selected, the camera device's flash unit controls are |
| * also overridden.</p> |
| * <p>The FLASH modes are only available if the camera device |
| * has a flash unit ({@link CameraCharacteristics#FLASH_INFO_AVAILABLE android.flash.info.available} is <code>true</code>).</p> |
| * <p>If flash TORCH mode is desired, this field must be set to |
| * ON or OFF, and {@link CaptureRequest#FLASH_MODE android.flash.mode} set to TORCH.</p> |
| * <p>When set to any of the ON modes, the values chosen by the |
| * camera device auto-exposure routine for the overridden |
| * fields for a given capture will be available in its |
| * CaptureResult.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #CONTROL_AE_MODE_OFF OFF}</li> |
| * <li>{@link #CONTROL_AE_MODE_ON ON}</li> |
| * <li>{@link #CONTROL_AE_MODE_ON_AUTO_FLASH ON_AUTO_FLASH}</li> |
| * <li>{@link #CONTROL_AE_MODE_ON_ALWAYS_FLASH ON_ALWAYS_FLASH}</li> |
| * <li>{@link #CONTROL_AE_MODE_ON_AUTO_FLASH_REDEYE ON_AUTO_FLASH_REDEYE}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br> |
| * {@link CameraCharacteristics#CONTROL_AE_AVAILABLE_MODES android.control.aeAvailableModes}</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CameraCharacteristics#CONTROL_AE_AVAILABLE_MODES |
| * @see CaptureRequest#CONTROL_MODE |
| * @see CameraCharacteristics#FLASH_INFO_AVAILABLE |
| * @see CaptureRequest#FLASH_MODE |
| * @see CaptureRequest#SENSOR_EXPOSURE_TIME |
| * @see CaptureRequest#SENSOR_FRAME_DURATION |
| * @see CaptureRequest#SENSOR_SENSITIVITY |
| * @see #CONTROL_AE_MODE_OFF |
| * @see #CONTROL_AE_MODE_ON |
| * @see #CONTROL_AE_MODE_ON_AUTO_FLASH |
| * @see #CONTROL_AE_MODE_ON_ALWAYS_FLASH |
| * @see #CONTROL_AE_MODE_ON_AUTO_FLASH_REDEYE |
| */ |
| @PublicKey |
| public static final Key<Integer> CONTROL_AE_MODE = |
| new Key<Integer>("android.control.aeMode", int.class); |
| |
| /** |
| * <p>List of metering areas to use for auto-exposure adjustment.</p> |
| * <p>Not available if {@link CameraCharacteristics#CONTROL_MAX_REGIONS_AE android.control.maxRegionsAe} is 0. |
| * Otherwise will always be present.</p> |
| * <p>The maximum number of regions supported by the device is determined by the value |
| * of {@link CameraCharacteristics#CONTROL_MAX_REGIONS_AE android.control.maxRegionsAe}.</p> |
| * <p>The coordinate system is based on the active pixel array, |
| * with (0,0) being the top-left pixel in the active pixel array, and |
| * ({@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}.width - 1, |
| * {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}.height - 1) being the |
| * bottom-right pixel in the active pixel array.</p> |
| * <p>The weight must be within <code>[0, 1000]</code>, and represents a weight |
| * for every pixel in the area. This means that a large metering area |
| * with the same weight as a smaller area will have more effect in |
| * the metering result. Metering areas can partially overlap and the |
| * camera device will add the weights in the overlap region.</p> |
| * <p>The weights are relative to weights of other exposure metering regions, so if only one |
| * region is used, all non-zero weights will have the same effect. A region with 0 |
| * weight is ignored.</p> |
| * <p>If all regions have 0 weight, then no specific metering area needs to be used by the |
| * camera device.</p> |
| * <p>If the metering region is outside the used {@link CaptureRequest#SCALER_CROP_REGION android.scaler.cropRegion} returned in |
| * capture result metadata, the camera device will ignore the sections outside the crop |
| * region and output only the intersection rectangle as the metering region in the result |
| * metadata. If the region is entirely outside the crop region, it will be ignored and |
| * not reported in the result metadata.</p> |
| * <p><b>Units</b>: Pixel coordinates within {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}</p> |
| * <p><b>Range of valid values:</b><br> |
| * Coordinates must be between <code>[(0,0), (width, height))</code> of |
| * {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * |
| * @see CameraCharacteristics#CONTROL_MAX_REGIONS_AE |
| * @see CaptureRequest#SCALER_CROP_REGION |
| * @see CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE |
| */ |
| @PublicKey |
| public static final Key<android.hardware.camera2.params.MeteringRectangle[]> CONTROL_AE_REGIONS = |
| new Key<android.hardware.camera2.params.MeteringRectangle[]>("android.control.aeRegions", android.hardware.camera2.params.MeteringRectangle[].class); |
| |
| /** |
| * <p>Range over which the auto-exposure routine can |
| * adjust the capture frame rate to maintain good |
| * exposure.</p> |
| * <p>Only constrains auto-exposure (AE) algorithm, not |
| * manual control of {@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime} and |
| * {@link CaptureRequest#SENSOR_FRAME_DURATION android.sensor.frameDuration}.</p> |
| * <p><b>Units</b>: Frames per second (FPS)</p> |
| * <p><b>Range of valid values:</b><br> |
| * Any of the entries in {@link CameraCharacteristics#CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES android.control.aeAvailableTargetFpsRanges}</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CameraCharacteristics#CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES |
| * @see CaptureRequest#SENSOR_EXPOSURE_TIME |
| * @see CaptureRequest#SENSOR_FRAME_DURATION |
| */ |
| @PublicKey |
| public static final Key<android.util.Range<Integer>> CONTROL_AE_TARGET_FPS_RANGE = |
| new Key<android.util.Range<Integer>>("android.control.aeTargetFpsRange", new TypeReference<android.util.Range<Integer>>() {{ }}); |
| |
| /** |
| * <p>Whether the camera device will trigger a precapture |
| * metering sequence when it processes this request.</p> |
| * <p>This entry is normally set to IDLE, or is not |
| * included at all in the request settings. When included and |
| * set to START, the camera device will trigger the auto-exposure (AE) |
| * precapture metering sequence.</p> |
| * <p>When set to CANCEL, the camera device will cancel any active |
| * precapture metering trigger, and return to its initial AE state. |
| * If a precapture metering sequence is already completed, and the camera |
| * device has implicitly locked the AE for subsequent still capture, the |
| * CANCEL trigger will unlock the AE and return to its initial AE state.</p> |
| * <p>The precapture sequence should be triggered before starting a |
| * high-quality still capture for final metering decisions to |
| * be made, and for firing pre-capture flash pulses to estimate |
| * scene brightness and required final capture flash power, when |
| * the flash is enabled.</p> |
| * <p>Normally, this entry should be set to START for only a |
| * single request, and the application should wait until the |
| * sequence completes before starting a new one.</p> |
| * <p>When a precapture metering sequence is finished, the camera device |
| * may lock the auto-exposure routine internally to be able to accurately expose the |
| * subsequent still capture image (<code>{@link CaptureRequest#CONTROL_CAPTURE_INTENT android.control.captureIntent} == STILL_CAPTURE</code>). |
| * For this case, the AE may not resume normal scan if no subsequent still capture is |
| * submitted. To ensure that the AE routine restarts normal scan, the application should |
| * submit a request with <code>{@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock} == true</code>, followed by a request |
| * with <code>{@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock} == false</code>, if the application decides not to submit a |
| * still capture request after the precapture sequence completes. Alternatively, for |
| * API level 23 or newer devices, the CANCEL can be used to unlock the camera device |
| * internally locked AE if the application doesn't submit a still capture request after |
| * the AE precapture trigger. Note that, the CANCEL was added in API level 23, and must not |
| * be used in devices that have earlier API levels.</p> |
| * <p>The exact effect of auto-exposure (AE) precapture trigger |
| * depends on the current AE mode and state; see |
| * {@link CaptureResult#CONTROL_AE_STATE android.control.aeState} for AE precapture state transition |
| * details.</p> |
| * <p>On LEGACY-level devices, the precapture trigger is not supported; |
| * capturing a high-resolution JPEG image will automatically trigger a |
| * precapture sequence before the high-resolution capture, including |
| * potentially firing a pre-capture flash.</p> |
| * <p>Using the precapture trigger and the auto-focus trigger {@link CaptureRequest#CONTROL_AF_TRIGGER android.control.afTrigger} |
| * simultaneously is allowed. However, since these triggers often require cooperation between |
| * the auto-focus and auto-exposure routines (for example, the may need to be enabled for a |
| * focus sweep), the camera device may delay acting on a later trigger until the previous |
| * trigger has been fully handled. This may lead to longer intervals between the trigger and |
| * changes to {@link CaptureResult#CONTROL_AE_STATE android.control.aeState} indicating the start of the precapture sequence, for |
| * example.</p> |
| * <p>If both the precapture and the auto-focus trigger are activated on the same request, then |
| * the camera device will complete them in the optimal order for that device.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #CONTROL_AE_PRECAPTURE_TRIGGER_IDLE IDLE}</li> |
| * <li>{@link #CONTROL_AE_PRECAPTURE_TRIGGER_START START}</li> |
| * <li>{@link #CONTROL_AE_PRECAPTURE_TRIGGER_CANCEL CANCEL}</li> |
| * </ul></p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Limited capability</b> - |
| * Present on all camera devices that report being at least {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED HARDWARE_LEVEL_LIMITED} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CaptureRequest#CONTROL_AE_LOCK |
| * @see CaptureResult#CONTROL_AE_STATE |
| * @see CaptureRequest#CONTROL_AF_TRIGGER |
| * @see CaptureRequest#CONTROL_CAPTURE_INTENT |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see #CONTROL_AE_PRECAPTURE_TRIGGER_IDLE |
| * @see #CONTROL_AE_PRECAPTURE_TRIGGER_START |
| * @see #CONTROL_AE_PRECAPTURE_TRIGGER_CANCEL |
| */ |
| @PublicKey |
| public static final Key<Integer> CONTROL_AE_PRECAPTURE_TRIGGER = |
| new Key<Integer>("android.control.aePrecaptureTrigger", int.class); |
| |
| /** |
| * <p>Current state of the auto-exposure (AE) algorithm.</p> |
| * <p>Switching between or enabling AE modes ({@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode}) always |
| * resets the AE state to INACTIVE. Similarly, switching between {@link CaptureRequest#CONTROL_MODE android.control.mode}, |
| * or {@link CaptureRequest#CONTROL_SCENE_MODE android.control.sceneMode} if <code>{@link CaptureRequest#CONTROL_MODE android.control.mode} == USE_SCENE_MODE</code> resets all |
| * the algorithm states to INACTIVE.</p> |
| * <p>The camera device can do several state transitions between two results, if it is |
| * allowed by the state transition table. For example: INACTIVE may never actually be |
| * seen in a result.</p> |
| * <p>The state in the result is the state for this image (in sync with this image): if |
| * AE state becomes CONVERGED, then the image data associated with this result should |
| * be good to use.</p> |
| * <p>Below are state transition tables for different AE modes.</p> |
| * <table> |
| * <thead> |
| * <tr> |
| * <th align="center">State</th> |
| * <th align="center">Transition Cause</th> |
| * <th align="center">New State</th> |
| * <th align="center">Notes</th> |
| * </tr> |
| * </thead> |
| * <tbody> |
| * <tr> |
| * <td align="center">INACTIVE</td> |
| * <td align="center"></td> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Camera device auto exposure algorithm is disabled</td> |
| * </tr> |
| * </tbody> |
| * </table> |
| * <p>When {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} is AE_MODE_ON_*:</p> |
| * <table> |
| * <thead> |
| * <tr> |
| * <th align="center">State</th> |
| * <th align="center">Transition Cause</th> |
| * <th align="center">New State</th> |
| * <th align="center">Notes</th> |
| * </tr> |
| * </thead> |
| * <tbody> |
| * <tr> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Camera device initiates AE scan</td> |
| * <td align="center">SEARCHING</td> |
| * <td align="center">Values changing</td> |
| * </tr> |
| * <tr> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock} is ON</td> |
| * <td align="center">LOCKED</td> |
| * <td align="center">Values locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">SEARCHING</td> |
| * <td align="center">Camera device finishes AE scan</td> |
| * <td align="center">CONVERGED</td> |
| * <td align="center">Good values, not changing</td> |
| * </tr> |
| * <tr> |
| * <td align="center">SEARCHING</td> |
| * <td align="center">Camera device finishes AE scan</td> |
| * <td align="center">FLASH_REQUIRED</td> |
| * <td align="center">Converged but too dark w/o flash</td> |
| * </tr> |
| * <tr> |
| * <td align="center">SEARCHING</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock} is ON</td> |
| * <td align="center">LOCKED</td> |
| * <td align="center">Values locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">CONVERGED</td> |
| * <td align="center">Camera device initiates AE scan</td> |
| * <td align="center">SEARCHING</td> |
| * <td align="center">Values changing</td> |
| * </tr> |
| * <tr> |
| * <td align="center">CONVERGED</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock} is ON</td> |
| * <td align="center">LOCKED</td> |
| * <td align="center">Values locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">FLASH_REQUIRED</td> |
| * <td align="center">Camera device initiates AE scan</td> |
| * <td align="center">SEARCHING</td> |
| * <td align="center">Values changing</td> |
| * </tr> |
| * <tr> |
| * <td align="center">FLASH_REQUIRED</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock} is ON</td> |
| * <td align="center">LOCKED</td> |
| * <td align="center">Values locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">LOCKED</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock} is OFF</td> |
| * <td align="center">SEARCHING</td> |
| * <td align="center">Values not good after unlock</td> |
| * </tr> |
| * <tr> |
| * <td align="center">LOCKED</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock} is OFF</td> |
| * <td align="center">CONVERGED</td> |
| * <td align="center">Values good after unlock</td> |
| * </tr> |
| * <tr> |
| * <td align="center">LOCKED</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock} is OFF</td> |
| * <td align="center">FLASH_REQUIRED</td> |
| * <td align="center">Exposure good, but too dark</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PRECAPTURE</td> |
| * <td align="center">Sequence done. {@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock} is OFF</td> |
| * <td align="center">CONVERGED</td> |
| * <td align="center">Ready for high-quality capture</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PRECAPTURE</td> |
| * <td align="center">Sequence done. {@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock} is ON</td> |
| * <td align="center">LOCKED</td> |
| * <td align="center">Ready for high-quality capture</td> |
| * </tr> |
| * <tr> |
| * <td align="center">LOCKED</td> |
| * <td align="center">aeLock is ON and aePrecaptureTrigger is START</td> |
| * <td align="center">LOCKED</td> |
| * <td align="center">Precapture trigger is ignored when AE is already locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">LOCKED</td> |
| * <td align="center">aeLock is ON and aePrecaptureTrigger is CANCEL</td> |
| * <td align="center">LOCKED</td> |
| * <td align="center">Precapture trigger is ignored when AE is already locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">Any state (excluding LOCKED)</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger} is START</td> |
| * <td align="center">PRECAPTURE</td> |
| * <td align="center">Start AE precapture metering sequence</td> |
| * </tr> |
| * <tr> |
| * <td align="center">Any state (excluding LOCKED)</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger} is CANCEL</td> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Currently active precapture metering sequence is canceled</td> |
| * </tr> |
| * </tbody> |
| * </table> |
| * <p>For the above table, the camera device may skip reporting any state changes that happen |
| * without application intervention (i.e. mode switch, trigger, locking). Any state that |
| * can be skipped in that manner is called a transient state.</p> |
| * <p>For example, for above AE modes (AE_MODE_ON_*), in addition to the state transitions |
| * listed in above table, it is also legal for the camera device to skip one or more |
| * transient states between two results. See below table for examples:</p> |
| * <table> |
| * <thead> |
| * <tr> |
| * <th align="center">State</th> |
| * <th align="center">Transition Cause</th> |
| * <th align="center">New State</th> |
| * <th align="center">Notes</th> |
| * </tr> |
| * </thead> |
| * <tbody> |
| * <tr> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Camera device finished AE scan</td> |
| * <td align="center">CONVERGED</td> |
| * <td align="center">Values are already good, transient states are skipped by camera device.</td> |
| * </tr> |
| * <tr> |
| * <td align="center">Any state (excluding LOCKED)</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger} is START, sequence done</td> |
| * <td align="center">FLASH_REQUIRED</td> |
| * <td align="center">Converged but too dark w/o flash after a precapture sequence, transient states are skipped by camera device.</td> |
| * </tr> |
| * <tr> |
| * <td align="center">Any state (excluding LOCKED)</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger} is START, sequence done</td> |
| * <td align="center">CONVERGED</td> |
| * <td align="center">Converged after a precapture sequence, transient states are skipped by camera device.</td> |
| * </tr> |
| * <tr> |
| * <td align="center">Any state (excluding LOCKED)</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger} is CANCEL, converged</td> |
| * <td align="center">FLASH_REQUIRED</td> |
| * <td align="center">Converged but too dark w/o flash after a precapture sequence is canceled, transient states are skipped by camera device.</td> |
| * </tr> |
| * <tr> |
| * <td align="center">Any state (excluding LOCKED)</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger} is CANCEL, converged</td> |
| * <td align="center">CONVERGED</td> |
| * <td align="center">Converged after a precapture sequenceis canceled, transient states are skipped by camera device.</td> |
| * </tr> |
| * <tr> |
| * <td align="center">CONVERGED</td> |
| * <td align="center">Camera device finished AE scan</td> |
| * <td align="center">FLASH_REQUIRED</td> |
| * <td align="center">Converged but too dark w/o flash after a new scan, transient states are skipped by camera device.</td> |
| * </tr> |
| * <tr> |
| * <td align="center">FLASH_REQUIRED</td> |
| * <td align="center">Camera device finished AE scan</td> |
| * <td align="center">CONVERGED</td> |
| * <td align="center">Converged after a new scan, transient states are skipped by camera device.</td> |
| * </tr> |
| * </tbody> |
| * </table> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #CONTROL_AE_STATE_INACTIVE INACTIVE}</li> |
| * <li>{@link #CONTROL_AE_STATE_SEARCHING SEARCHING}</li> |
| * <li>{@link #CONTROL_AE_STATE_CONVERGED CONVERGED}</li> |
| * <li>{@link #CONTROL_AE_STATE_LOCKED LOCKED}</li> |
| * <li>{@link #CONTROL_AE_STATE_FLASH_REQUIRED FLASH_REQUIRED}</li> |
| * <li>{@link #CONTROL_AE_STATE_PRECAPTURE PRECAPTURE}</li> |
| * </ul></p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Limited capability</b> - |
| * Present on all camera devices that report being at least {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED HARDWARE_LEVEL_LIMITED} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CaptureRequest#CONTROL_AE_LOCK |
| * @see CaptureRequest#CONTROL_AE_MODE |
| * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER |
| * @see CaptureRequest#CONTROL_MODE |
| * @see CaptureRequest#CONTROL_SCENE_MODE |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see #CONTROL_AE_STATE_INACTIVE |
| * @see #CONTROL_AE_STATE_SEARCHING |
| * @see #CONTROL_AE_STATE_CONVERGED |
| * @see #CONTROL_AE_STATE_LOCKED |
| * @see #CONTROL_AE_STATE_FLASH_REQUIRED |
| * @see #CONTROL_AE_STATE_PRECAPTURE |
| */ |
| @PublicKey |
| public static final Key<Integer> CONTROL_AE_STATE = |
| new Key<Integer>("android.control.aeState", int.class); |
| |
| /** |
| * <p>Whether auto-focus (AF) is currently enabled, and what |
| * mode it is set to.</p> |
| * <p>Only effective if {@link CaptureRequest#CONTROL_MODE android.control.mode} = AUTO and the lens is not fixed focus |
| * (i.e. <code>{@link CameraCharacteristics#LENS_INFO_MINIMUM_FOCUS_DISTANCE android.lens.info.minimumFocusDistance} > 0</code>). Also note that |
| * when {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} is OFF, the behavior of AF is device |
| * dependent. It is recommended to lock AF by using {@link CaptureRequest#CONTROL_AF_TRIGGER android.control.afTrigger} before |
| * setting {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} to OFF, or set AF mode to OFF when AE is OFF.</p> |
| * <p>If the lens is controlled by the camera device auto-focus algorithm, |
| * the camera device will report the current AF status in {@link CaptureResult#CONTROL_AF_STATE android.control.afState} |
| * in result metadata.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #CONTROL_AF_MODE_OFF OFF}</li> |
| * <li>{@link #CONTROL_AF_MODE_AUTO AUTO}</li> |
| * <li>{@link #CONTROL_AF_MODE_MACRO MACRO}</li> |
| * <li>{@link #CONTROL_AF_MODE_CONTINUOUS_VIDEO CONTINUOUS_VIDEO}</li> |
| * <li>{@link #CONTROL_AF_MODE_CONTINUOUS_PICTURE CONTINUOUS_PICTURE}</li> |
| * <li>{@link #CONTROL_AF_MODE_EDOF EDOF}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br> |
| * {@link CameraCharacteristics#CONTROL_AF_AVAILABLE_MODES android.control.afAvailableModes}</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CaptureRequest#CONTROL_AE_MODE |
| * @see CameraCharacteristics#CONTROL_AF_AVAILABLE_MODES |
| * @see CaptureResult#CONTROL_AF_STATE |
| * @see CaptureRequest#CONTROL_AF_TRIGGER |
| * @see CaptureRequest#CONTROL_MODE |
| * @see CameraCharacteristics#LENS_INFO_MINIMUM_FOCUS_DISTANCE |
| * @see #CONTROL_AF_MODE_OFF |
| * @see #CONTROL_AF_MODE_AUTO |
| * @see #CONTROL_AF_MODE_MACRO |
| * @see #CONTROL_AF_MODE_CONTINUOUS_VIDEO |
| * @see #CONTROL_AF_MODE_CONTINUOUS_PICTURE |
| * @see #CONTROL_AF_MODE_EDOF |
| */ |
| @PublicKey |
| public static final Key<Integer> CONTROL_AF_MODE = |
| new Key<Integer>("android.control.afMode", int.class); |
| |
| /** |
| * <p>List of metering areas to use for auto-focus.</p> |
| * <p>Not available if {@link CameraCharacteristics#CONTROL_MAX_REGIONS_AF android.control.maxRegionsAf} is 0. |
| * Otherwise will always be present.</p> |
| * <p>The maximum number of focus areas supported by the device is determined by the value |
| * of {@link CameraCharacteristics#CONTROL_MAX_REGIONS_AF android.control.maxRegionsAf}.</p> |
| * <p>The coordinate system is based on the active pixel array, |
| * with (0,0) being the top-left pixel in the active pixel array, and |
| * ({@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}.width - 1, |
| * {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}.height - 1) being the |
| * bottom-right pixel in the active pixel array.</p> |
| * <p>The weight must be within <code>[0, 1000]</code>, and represents a weight |
| * for every pixel in the area. This means that a large metering area |
| * with the same weight as a smaller area will have more effect in |
| * the metering result. Metering areas can partially overlap and the |
| * camera device will add the weights in the overlap region.</p> |
| * <p>The weights are relative to weights of other metering regions, so if only one region |
| * is used, all non-zero weights will have the same effect. A region with 0 weight is |
| * ignored.</p> |
| * <p>If all regions have 0 weight, then no specific metering area needs to be used by the |
| * camera device.</p> |
| * <p>If the metering region is outside the used {@link CaptureRequest#SCALER_CROP_REGION android.scaler.cropRegion} returned in |
| * capture result metadata, the camera device will ignore the sections outside the crop |
| * region and output only the intersection rectangle as the metering region in the result |
| * metadata. If the region is entirely outside the crop region, it will be ignored and |
| * not reported in the result metadata.</p> |
| * <p><b>Units</b>: Pixel coordinates within {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}</p> |
| * <p><b>Range of valid values:</b><br> |
| * Coordinates must be between <code>[(0,0), (width, height))</code> of |
| * {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * |
| * @see CameraCharacteristics#CONTROL_MAX_REGIONS_AF |
| * @see CaptureRequest#SCALER_CROP_REGION |
| * @see CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE |
| */ |
| @PublicKey |
| public static final Key<android.hardware.camera2.params.MeteringRectangle[]> CONTROL_AF_REGIONS = |
| new Key<android.hardware.camera2.params.MeteringRectangle[]>("android.control.afRegions", android.hardware.camera2.params.MeteringRectangle[].class); |
| |
| /** |
| * <p>Whether the camera device will trigger autofocus for this request.</p> |
| * <p>This entry is normally set to IDLE, or is not |
| * included at all in the request settings.</p> |
| * <p>When included and set to START, the camera device will trigger the |
| * autofocus algorithm. If autofocus is disabled, this trigger has no effect.</p> |
| * <p>When set to CANCEL, the camera device will cancel any active trigger, |
| * and return to its initial AF state.</p> |
| * <p>Generally, applications should set this entry to START or CANCEL for only a |
| * single capture, and then return it to IDLE (or not set at all). Specifying |
| * START for multiple captures in a row means restarting the AF operation over |
| * and over again.</p> |
| * <p>See {@link CaptureResult#CONTROL_AF_STATE android.control.afState} for what the trigger means for each AF mode.</p> |
| * <p>Using the autofocus trigger and the precapture trigger {@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger} |
| * simultaneously is allowed. However, since these triggers often require cooperation between |
| * the auto-focus and auto-exposure routines (for example, the may need to be enabled for a |
| * focus sweep), the camera device may delay acting on a later trigger until the previous |
| * trigger has been fully handled. This may lead to longer intervals between the trigger and |
| * changes to {@link CaptureResult#CONTROL_AF_STATE android.control.afState}, for example.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #CONTROL_AF_TRIGGER_IDLE IDLE}</li> |
| * <li>{@link #CONTROL_AF_TRIGGER_START START}</li> |
| * <li>{@link #CONTROL_AF_TRIGGER_CANCEL CANCEL}</li> |
| * </ul></p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER |
| * @see CaptureResult#CONTROL_AF_STATE |
| * @see #CONTROL_AF_TRIGGER_IDLE |
| * @see #CONTROL_AF_TRIGGER_START |
| * @see #CONTROL_AF_TRIGGER_CANCEL |
| */ |
| @PublicKey |
| public static final Key<Integer> CONTROL_AF_TRIGGER = |
| new Key<Integer>("android.control.afTrigger", int.class); |
| |
| /** |
| * <p>Current state of auto-focus (AF) algorithm.</p> |
| * <p>Switching between or enabling AF modes ({@link CaptureRequest#CONTROL_AF_MODE android.control.afMode}) always |
| * resets the AF state to INACTIVE. Similarly, switching between {@link CaptureRequest#CONTROL_MODE android.control.mode}, |
| * or {@link CaptureRequest#CONTROL_SCENE_MODE android.control.sceneMode} if <code>{@link CaptureRequest#CONTROL_MODE android.control.mode} == USE_SCENE_MODE</code> resets all |
| * the algorithm states to INACTIVE.</p> |
| * <p>The camera device can do several state transitions between two results, if it is |
| * allowed by the state transition table. For example: INACTIVE may never actually be |
| * seen in a result.</p> |
| * <p>The state in the result is the state for this image (in sync with this image): if |
| * AF state becomes FOCUSED, then the image data associated with this result should |
| * be sharp.</p> |
| * <p>Below are state transition tables for different AF modes.</p> |
| * <p>When {@link CaptureRequest#CONTROL_AF_MODE android.control.afMode} is AF_MODE_OFF or AF_MODE_EDOF:</p> |
| * <table> |
| * <thead> |
| * <tr> |
| * <th align="center">State</th> |
| * <th align="center">Transition Cause</th> |
| * <th align="center">New State</th> |
| * <th align="center">Notes</th> |
| * </tr> |
| * </thead> |
| * <tbody> |
| * <tr> |
| * <td align="center">INACTIVE</td> |
| * <td align="center"></td> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Never changes</td> |
| * </tr> |
| * </tbody> |
| * </table> |
| * <p>When {@link CaptureRequest#CONTROL_AF_MODE android.control.afMode} is AF_MODE_AUTO or AF_MODE_MACRO:</p> |
| * <table> |
| * <thead> |
| * <tr> |
| * <th align="center">State</th> |
| * <th align="center">Transition Cause</th> |
| * <th align="center">New State</th> |
| * <th align="center">Notes</th> |
| * </tr> |
| * </thead> |
| * <tbody> |
| * <tr> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">ACTIVE_SCAN</td> |
| * <td align="center">Start AF sweep, Lens now moving</td> |
| * </tr> |
| * <tr> |
| * <td align="center">ACTIVE_SCAN</td> |
| * <td align="center">AF sweep done</td> |
| * <td align="center">FOCUSED_LOCKED</td> |
| * <td align="center">Focused, Lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">ACTIVE_SCAN</td> |
| * <td align="center">AF sweep done</td> |
| * <td align="center">NOT_FOCUSED_LOCKED</td> |
| * <td align="center">Not focused, Lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">ACTIVE_SCAN</td> |
| * <td align="center">AF_CANCEL</td> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Cancel/reset AF, Lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">FOCUSED_LOCKED</td> |
| * <td align="center">AF_CANCEL</td> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Cancel/reset AF</td> |
| * </tr> |
| * <tr> |
| * <td align="center">FOCUSED_LOCKED</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">ACTIVE_SCAN</td> |
| * <td align="center">Start new sweep, Lens now moving</td> |
| * </tr> |
| * <tr> |
| * <td align="center">NOT_FOCUSED_LOCKED</td> |
| * <td align="center">AF_CANCEL</td> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Cancel/reset AF</td> |
| * </tr> |
| * <tr> |
| * <td align="center">NOT_FOCUSED_LOCKED</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">ACTIVE_SCAN</td> |
| * <td align="center">Start new sweep, Lens now moving</td> |
| * </tr> |
| * <tr> |
| * <td align="center">Any state</td> |
| * <td align="center">Mode change</td> |
| * <td align="center">INACTIVE</td> |
| * <td align="center"></td> |
| * </tr> |
| * </tbody> |
| * </table> |
| * <p>For the above table, the camera device may skip reporting any state changes that happen |
| * without application intervention (i.e. mode switch, trigger, locking). Any state that |
| * can be skipped in that manner is called a transient state.</p> |
| * <p>For example, for these AF modes (AF_MODE_AUTO and AF_MODE_MACRO), in addition to the |
| * state transitions listed in above table, it is also legal for the camera device to skip |
| * one or more transient states between two results. See below table for examples:</p> |
| * <table> |
| * <thead> |
| * <tr> |
| * <th align="center">State</th> |
| * <th align="center">Transition Cause</th> |
| * <th align="center">New State</th> |
| * <th align="center">Notes</th> |
| * </tr> |
| * </thead> |
| * <tbody> |
| * <tr> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">FOCUSED_LOCKED</td> |
| * <td align="center">Focus is already good or good after a scan, lens is now locked.</td> |
| * </tr> |
| * <tr> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">NOT_FOCUSED_LOCKED</td> |
| * <td align="center">Focus failed after a scan, lens is now locked.</td> |
| * </tr> |
| * <tr> |
| * <td align="center">FOCUSED_LOCKED</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">FOCUSED_LOCKED</td> |
| * <td align="center">Focus is already good or good after a scan, lens is now locked.</td> |
| * </tr> |
| * <tr> |
| * <td align="center">NOT_FOCUSED_LOCKED</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">FOCUSED_LOCKED</td> |
| * <td align="center">Focus is good after a scan, lens is not locked.</td> |
| * </tr> |
| * </tbody> |
| * </table> |
| * <p>When {@link CaptureRequest#CONTROL_AF_MODE android.control.afMode} is AF_MODE_CONTINUOUS_VIDEO:</p> |
| * <table> |
| * <thead> |
| * <tr> |
| * <th align="center">State</th> |
| * <th align="center">Transition Cause</th> |
| * <th align="center">New State</th> |
| * <th align="center">Notes</th> |
| * </tr> |
| * </thead> |
| * <tbody> |
| * <tr> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Camera device initiates new scan</td> |
| * <td align="center">PASSIVE_SCAN</td> |
| * <td align="center">Start AF scan, Lens now moving</td> |
| * </tr> |
| * <tr> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">NOT_FOCUSED_LOCKED</td> |
| * <td align="center">AF state query, Lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_SCAN</td> |
| * <td align="center">Camera device completes current scan</td> |
| * <td align="center">PASSIVE_FOCUSED</td> |
| * <td align="center">End AF scan, Lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_SCAN</td> |
| * <td align="center">Camera device fails current scan</td> |
| * <td align="center">PASSIVE_UNFOCUSED</td> |
| * <td align="center">End AF scan, Lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_SCAN</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">FOCUSED_LOCKED</td> |
| * <td align="center">Immediate transition, if focus is good. Lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_SCAN</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">NOT_FOCUSED_LOCKED</td> |
| * <td align="center">Immediate transition, if focus is bad. Lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_SCAN</td> |
| * <td align="center">AF_CANCEL</td> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Reset lens position, Lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_FOCUSED</td> |
| * <td align="center">Camera device initiates new scan</td> |
| * <td align="center">PASSIVE_SCAN</td> |
| * <td align="center">Start AF scan, Lens now moving</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_UNFOCUSED</td> |
| * <td align="center">Camera device initiates new scan</td> |
| * <td align="center">PASSIVE_SCAN</td> |
| * <td align="center">Start AF scan, Lens now moving</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_FOCUSED</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">FOCUSED_LOCKED</td> |
| * <td align="center">Immediate transition, lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_UNFOCUSED</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">NOT_FOCUSED_LOCKED</td> |
| * <td align="center">Immediate transition, lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">FOCUSED_LOCKED</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">FOCUSED_LOCKED</td> |
| * <td align="center">No effect</td> |
| * </tr> |
| * <tr> |
| * <td align="center">FOCUSED_LOCKED</td> |
| * <td align="center">AF_CANCEL</td> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Restart AF scan</td> |
| * </tr> |
| * <tr> |
| * <td align="center">NOT_FOCUSED_LOCKED</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">NOT_FOCUSED_LOCKED</td> |
| * <td align="center">No effect</td> |
| * </tr> |
| * <tr> |
| * <td align="center">NOT_FOCUSED_LOCKED</td> |
| * <td align="center">AF_CANCEL</td> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Restart AF scan</td> |
| * </tr> |
| * </tbody> |
| * </table> |
| * <p>When {@link CaptureRequest#CONTROL_AF_MODE android.control.afMode} is AF_MODE_CONTINUOUS_PICTURE:</p> |
| * <table> |
| * <thead> |
| * <tr> |
| * <th align="center">State</th> |
| * <th align="center">Transition Cause</th> |
| * <th align="center">New State</th> |
| * <th align="center">Notes</th> |
| * </tr> |
| * </thead> |
| * <tbody> |
| * <tr> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Camera device initiates new scan</td> |
| * <td align="center">PASSIVE_SCAN</td> |
| * <td align="center">Start AF scan, Lens now moving</td> |
| * </tr> |
| * <tr> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">NOT_FOCUSED_LOCKED</td> |
| * <td align="center">AF state query, Lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_SCAN</td> |
| * <td align="center">Camera device completes current scan</td> |
| * <td align="center">PASSIVE_FOCUSED</td> |
| * <td align="center">End AF scan, Lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_SCAN</td> |
| * <td align="center">Camera device fails current scan</td> |
| * <td align="center">PASSIVE_UNFOCUSED</td> |
| * <td align="center">End AF scan, Lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_SCAN</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">FOCUSED_LOCKED</td> |
| * <td align="center">Eventual transition once the focus is good. Lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_SCAN</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">NOT_FOCUSED_LOCKED</td> |
| * <td align="center">Eventual transition if cannot find focus. Lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_SCAN</td> |
| * <td align="center">AF_CANCEL</td> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Reset lens position, Lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_FOCUSED</td> |
| * <td align="center">Camera device initiates new scan</td> |
| * <td align="center">PASSIVE_SCAN</td> |
| * <td align="center">Start AF scan, Lens now moving</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_UNFOCUSED</td> |
| * <td align="center">Camera device initiates new scan</td> |
| * <td align="center">PASSIVE_SCAN</td> |
| * <td align="center">Start AF scan, Lens now moving</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_FOCUSED</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">FOCUSED_LOCKED</td> |
| * <td align="center">Immediate trans. Lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">PASSIVE_UNFOCUSED</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">NOT_FOCUSED_LOCKED</td> |
| * <td align="center">Immediate trans. Lens now locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">FOCUSED_LOCKED</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">FOCUSED_LOCKED</td> |
| * <td align="center">No effect</td> |
| * </tr> |
| * <tr> |
| * <td align="center">FOCUSED_LOCKED</td> |
| * <td align="center">AF_CANCEL</td> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Restart AF scan</td> |
| * </tr> |
| * <tr> |
| * <td align="center">NOT_FOCUSED_LOCKED</td> |
| * <td align="center">AF_TRIGGER</td> |
| * <td align="center">NOT_FOCUSED_LOCKED</td> |
| * <td align="center">No effect</td> |
| * </tr> |
| * <tr> |
| * <td align="center">NOT_FOCUSED_LOCKED</td> |
| * <td align="center">AF_CANCEL</td> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Restart AF scan</td> |
| * </tr> |
| * </tbody> |
| * </table> |
| * <p>When switch between AF_MODE_CONTINUOUS_* (CAF modes) and AF_MODE_AUTO/AF_MODE_MACRO |
| * (AUTO modes), the initial INACTIVE or PASSIVE_SCAN states may be skipped by the |
| * camera device. When a trigger is included in a mode switch request, the trigger |
| * will be evaluated in the context of the new mode in the request. |
| * See below table for examples:</p> |
| * <table> |
| * <thead> |
| * <tr> |
| * <th align="center">State</th> |
| * <th align="center">Transition Cause</th> |
| * <th align="center">New State</th> |
| * <th align="center">Notes</th> |
| * </tr> |
| * </thead> |
| * <tbody> |
| * <tr> |
| * <td align="center">any state</td> |
| * <td align="center">CAF-->AUTO mode switch</td> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Mode switch without trigger, initial state must be INACTIVE</td> |
| * </tr> |
| * <tr> |
| * <td align="center">any state</td> |
| * <td align="center">CAF-->AUTO mode switch with AF_TRIGGER</td> |
| * <td align="center">trigger-reachable states from INACTIVE</td> |
| * <td align="center">Mode switch with trigger, INACTIVE is skipped</td> |
| * </tr> |
| * <tr> |
| * <td align="center">any state</td> |
| * <td align="center">AUTO-->CAF mode switch</td> |
| * <td align="center">passively reachable states from INACTIVE</td> |
| * <td align="center">Mode switch without trigger, passive transient state is skipped</td> |
| * </tr> |
| * </tbody> |
| * </table> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #CONTROL_AF_STATE_INACTIVE INACTIVE}</li> |
| * <li>{@link #CONTROL_AF_STATE_PASSIVE_SCAN PASSIVE_SCAN}</li> |
| * <li>{@link #CONTROL_AF_STATE_PASSIVE_FOCUSED PASSIVE_FOCUSED}</li> |
| * <li>{@link #CONTROL_AF_STATE_ACTIVE_SCAN ACTIVE_SCAN}</li> |
| * <li>{@link #CONTROL_AF_STATE_FOCUSED_LOCKED FOCUSED_LOCKED}</li> |
| * <li>{@link #CONTROL_AF_STATE_NOT_FOCUSED_LOCKED NOT_FOCUSED_LOCKED}</li> |
| * <li>{@link #CONTROL_AF_STATE_PASSIVE_UNFOCUSED PASSIVE_UNFOCUSED}</li> |
| * </ul></p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CaptureRequest#CONTROL_AF_MODE |
| * @see CaptureRequest#CONTROL_MODE |
| * @see CaptureRequest#CONTROL_SCENE_MODE |
| * @see #CONTROL_AF_STATE_INACTIVE |
| * @see #CONTROL_AF_STATE_PASSIVE_SCAN |
| * @see #CONTROL_AF_STATE_PASSIVE_FOCUSED |
| * @see #CONTROL_AF_STATE_ACTIVE_SCAN |
| * @see #CONTROL_AF_STATE_FOCUSED_LOCKED |
| * @see #CONTROL_AF_STATE_NOT_FOCUSED_LOCKED |
| * @see #CONTROL_AF_STATE_PASSIVE_UNFOCUSED |
| */ |
| @PublicKey |
| public static final Key<Integer> CONTROL_AF_STATE = |
| new Key<Integer>("android.control.afState", int.class); |
| |
| /** |
| * <p>Whether auto-white balance (AWB) is currently locked to its |
| * latest calculated values.</p> |
| * <p>When set to <code>true</code> (ON), the AWB algorithm is locked to its latest parameters, |
| * and will not change color balance settings until the lock is set to <code>false</code> (OFF).</p> |
| * <p>Since the camera device has a pipeline of in-flight requests, the settings that |
| * get locked do not necessarily correspond to the settings that were present in the |
| * latest capture result received from the camera device, since additional captures |
| * and AWB updates may have occurred even before the result was sent out. If an |
| * application is switching between automatic and manual control and wishes to eliminate |
| * any flicker during the switch, the following procedure is recommended:</p> |
| * <ol> |
| * <li>Starting in auto-AWB mode:</li> |
| * <li>Lock AWB</li> |
| * <li>Wait for the first result to be output that has the AWB locked</li> |
| * <li>Copy AWB settings from that result into a request, set the request to manual AWB</li> |
| * <li>Submit the capture request, proceed to run manual AWB as desired.</li> |
| * </ol> |
| * <p>Note that AWB lock is only meaningful when |
| * {@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode} is in the AUTO mode; in other modes, |
| * AWB is already fixed to a specific setting.</p> |
| * <p>Some LEGACY devices may not support ON; the value is then overridden to OFF.</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CaptureRequest#CONTROL_AWB_MODE |
| */ |
| @PublicKey |
| public static final Key<Boolean> CONTROL_AWB_LOCK = |
| new Key<Boolean>("android.control.awbLock", boolean.class); |
| |
| /** |
| * <p>Whether auto-white balance (AWB) is currently setting the color |
| * transform fields, and what its illumination target |
| * is.</p> |
| * <p>This control is only effective if {@link CaptureRequest#CONTROL_MODE android.control.mode} is AUTO.</p> |
| * <p>When set to the ON mode, the camera device's auto-white balance |
| * routine is enabled, overriding the application's selected |
| * {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform}, {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} and |
| * {@link CaptureRequest#COLOR_CORRECTION_MODE android.colorCorrection.mode}. Note that when {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} |
| * is OFF, the behavior of AWB is device dependent. It is recommened to |
| * also set AWB mode to OFF or lock AWB by using {@link CaptureRequest#CONTROL_AWB_LOCK android.control.awbLock} before |
| * setting AE mode to OFF.</p> |
| * <p>When set to the OFF mode, the camera device's auto-white balance |
| * routine is disabled. The application manually controls the white |
| * balance by {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform}, {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} |
| * and {@link CaptureRequest#COLOR_CORRECTION_MODE android.colorCorrection.mode}.</p> |
| * <p>When set to any other modes, the camera device's auto-white |
| * balance routine is disabled. The camera device uses each |
| * particular illumination target for white balance |
| * adjustment. The application's values for |
| * {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform}, |
| * {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} and |
| * {@link CaptureRequest#COLOR_CORRECTION_MODE android.colorCorrection.mode} are ignored.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #CONTROL_AWB_MODE_OFF OFF}</li> |
| * <li>{@link #CONTROL_AWB_MODE_AUTO AUTO}</li> |
| * <li>{@link #CONTROL_AWB_MODE_INCANDESCENT INCANDESCENT}</li> |
| * <li>{@link #CONTROL_AWB_MODE_FLUORESCENT FLUORESCENT}</li> |
| * <li>{@link #CONTROL_AWB_MODE_WARM_FLUORESCENT WARM_FLUORESCENT}</li> |
| * <li>{@link #CONTROL_AWB_MODE_DAYLIGHT DAYLIGHT}</li> |
| * <li>{@link #CONTROL_AWB_MODE_CLOUDY_DAYLIGHT CLOUDY_DAYLIGHT}</li> |
| * <li>{@link #CONTROL_AWB_MODE_TWILIGHT TWILIGHT}</li> |
| * <li>{@link #CONTROL_AWB_MODE_SHADE SHADE}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br> |
| * {@link CameraCharacteristics#CONTROL_AWB_AVAILABLE_MODES android.control.awbAvailableModes}</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CaptureRequest#COLOR_CORRECTION_GAINS |
| * @see CaptureRequest#COLOR_CORRECTION_MODE |
| * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM |
| * @see CaptureRequest#CONTROL_AE_MODE |
| * @see CameraCharacteristics#CONTROL_AWB_AVAILABLE_MODES |
| * @see CaptureRequest#CONTROL_AWB_LOCK |
| * @see CaptureRequest#CONTROL_MODE |
| * @see #CONTROL_AWB_MODE_OFF |
| * @see #CONTROL_AWB_MODE_AUTO |
| * @see #CONTROL_AWB_MODE_INCANDESCENT |
| * @see #CONTROL_AWB_MODE_FLUORESCENT |
| * @see #CONTROL_AWB_MODE_WARM_FLUORESCENT |
| * @see #CONTROL_AWB_MODE_DAYLIGHT |
| * @see #CONTROL_AWB_MODE_CLOUDY_DAYLIGHT |
| * @see #CONTROL_AWB_MODE_TWILIGHT |
| * @see #CONTROL_AWB_MODE_SHADE |
| */ |
| @PublicKey |
| public static final Key<Integer> CONTROL_AWB_MODE = |
| new Key<Integer>("android.control.awbMode", int.class); |
| |
| /** |
| * <p>List of metering areas to use for auto-white-balance illuminant |
| * estimation.</p> |
| * <p>Not available if {@link CameraCharacteristics#CONTROL_MAX_REGIONS_AWB android.control.maxRegionsAwb} is 0. |
| * Otherwise will always be present.</p> |
| * <p>The maximum number of regions supported by the device is determined by the value |
| * of {@link CameraCharacteristics#CONTROL_MAX_REGIONS_AWB android.control.maxRegionsAwb}.</p> |
| * <p>The coordinate system is based on the active pixel array, |
| * with (0,0) being the top-left pixel in the active pixel array, and |
| * ({@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}.width - 1, |
| * {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}.height - 1) being the |
| * bottom-right pixel in the active pixel array.</p> |
| * <p>The weight must range from 0 to 1000, and represents a weight |
| * for every pixel in the area. This means that a large metering area |
| * with the same weight as a smaller area will have more effect in |
| * the metering result. Metering areas can partially overlap and the |
| * camera device will add the weights in the overlap region.</p> |
| * <p>The weights are relative to weights of other white balance metering regions, so if |
| * only one region is used, all non-zero weights will have the same effect. A region with |
| * 0 weight is ignored.</p> |
| * <p>If all regions have 0 weight, then no specific metering area needs to be used by the |
| * camera device.</p> |
| * <p>If the metering region is outside the used {@link CaptureRequest#SCALER_CROP_REGION android.scaler.cropRegion} returned in |
| * capture result metadata, the camera device will ignore the sections outside the crop |
| * region and output only the intersection rectangle as the metering region in the result |
| * metadata. If the region is entirely outside the crop region, it will be ignored and |
| * not reported in the result metadata.</p> |
| * <p><b>Units</b>: Pixel coordinates within {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}</p> |
| * <p><b>Range of valid values:</b><br> |
| * Coordinates must be between <code>[(0,0), (width, height))</code> of |
| * {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * |
| * @see CameraCharacteristics#CONTROL_MAX_REGIONS_AWB |
| * @see CaptureRequest#SCALER_CROP_REGION |
| * @see CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE |
| */ |
| @PublicKey |
| public static final Key<android.hardware.camera2.params.MeteringRectangle[]> CONTROL_AWB_REGIONS = |
| new Key<android.hardware.camera2.params.MeteringRectangle[]>("android.control.awbRegions", android.hardware.camera2.params.MeteringRectangle[].class); |
| |
| /** |
| * <p>Information to the camera device 3A (auto-exposure, |
| * auto-focus, auto-white balance) routines about the purpose |
| * of this capture, to help the camera device to decide optimal 3A |
| * strategy.</p> |
| * <p>This control (except for MANUAL) is only effective if |
| * <code>{@link CaptureRequest#CONTROL_MODE android.control.mode} != OFF</code> and any 3A routine is active.</p> |
| * <p>ZERO_SHUTTER_LAG will be supported if {@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES android.request.availableCapabilities} |
| * contains PRIVATE_REPROCESSING or YUV_REPROCESSING. MANUAL will be supported if |
| * {@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES android.request.availableCapabilities} contains MANUAL_SENSOR. Other intent values are |
| * always supported.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #CONTROL_CAPTURE_INTENT_CUSTOM CUSTOM}</li> |
| * <li>{@link #CONTROL_CAPTURE_INTENT_PREVIEW PREVIEW}</li> |
| * <li>{@link #CONTROL_CAPTURE_INTENT_STILL_CAPTURE STILL_CAPTURE}</li> |
| * <li>{@link #CONTROL_CAPTURE_INTENT_VIDEO_RECORD VIDEO_RECORD}</li> |
| * <li>{@link #CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT VIDEO_SNAPSHOT}</li> |
| * <li>{@link #CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG ZERO_SHUTTER_LAG}</li> |
| * <li>{@link #CONTROL_CAPTURE_INTENT_MANUAL MANUAL}</li> |
| * </ul></p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CaptureRequest#CONTROL_MODE |
| * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES |
| * @see #CONTROL_CAPTURE_INTENT_CUSTOM |
| * @see #CONTROL_CAPTURE_INTENT_PREVIEW |
| * @see #CONTROL_CAPTURE_INTENT_STILL_CAPTURE |
| * @see #CONTROL_CAPTURE_INTENT_VIDEO_RECORD |
| * @see #CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT |
| * @see #CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG |
| * @see #CONTROL_CAPTURE_INTENT_MANUAL |
| */ |
| @PublicKey |
| public static final Key<Integer> CONTROL_CAPTURE_INTENT = |
| new Key<Integer>("android.control.captureIntent", int.class); |
| |
| /** |
| * <p>Current state of auto-white balance (AWB) algorithm.</p> |
| * <p>Switching between or enabling AWB modes ({@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode}) always |
| * resets the AWB state to INACTIVE. Similarly, switching between {@link CaptureRequest#CONTROL_MODE android.control.mode}, |
| * or {@link CaptureRequest#CONTROL_SCENE_MODE android.control.sceneMode} if <code>{@link CaptureRequest#CONTROL_MODE android.control.mode} == USE_SCENE_MODE</code> resets all |
| * the algorithm states to INACTIVE.</p> |
| * <p>The camera device can do several state transitions between two results, if it is |
| * allowed by the state transition table. So INACTIVE may never actually be seen in |
| * a result.</p> |
| * <p>The state in the result is the state for this image (in sync with this image): if |
| * AWB state becomes CONVERGED, then the image data associated with this result should |
| * be good to use.</p> |
| * <p>Below are state transition tables for different AWB modes.</p> |
| * <p>When <code>{@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode} != AWB_MODE_AUTO</code>:</p> |
| * <table> |
| * <thead> |
| * <tr> |
| * <th align="center">State</th> |
| * <th align="center">Transition Cause</th> |
| * <th align="center">New State</th> |
| * <th align="center">Notes</th> |
| * </tr> |
| * </thead> |
| * <tbody> |
| * <tr> |
| * <td align="center">INACTIVE</td> |
| * <td align="center"></td> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Camera device auto white balance algorithm is disabled</td> |
| * </tr> |
| * </tbody> |
| * </table> |
| * <p>When {@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode} is AWB_MODE_AUTO:</p> |
| * <table> |
| * <thead> |
| * <tr> |
| * <th align="center">State</th> |
| * <th align="center">Transition Cause</th> |
| * <th align="center">New State</th> |
| * <th align="center">Notes</th> |
| * </tr> |
| * </thead> |
| * <tbody> |
| * <tr> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Camera device initiates AWB scan</td> |
| * <td align="center">SEARCHING</td> |
| * <td align="center">Values changing</td> |
| * </tr> |
| * <tr> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AWB_LOCK android.control.awbLock} is ON</td> |
| * <td align="center">LOCKED</td> |
| * <td align="center">Values locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">SEARCHING</td> |
| * <td align="center">Camera device finishes AWB scan</td> |
| * <td align="center">CONVERGED</td> |
| * <td align="center">Good values, not changing</td> |
| * </tr> |
| * <tr> |
| * <td align="center">SEARCHING</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AWB_LOCK android.control.awbLock} is ON</td> |
| * <td align="center">LOCKED</td> |
| * <td align="center">Values locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">CONVERGED</td> |
| * <td align="center">Camera device initiates AWB scan</td> |
| * <td align="center">SEARCHING</td> |
| * <td align="center">Values changing</td> |
| * </tr> |
| * <tr> |
| * <td align="center">CONVERGED</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AWB_LOCK android.control.awbLock} is ON</td> |
| * <td align="center">LOCKED</td> |
| * <td align="center">Values locked</td> |
| * </tr> |
| * <tr> |
| * <td align="center">LOCKED</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AWB_LOCK android.control.awbLock} is OFF</td> |
| * <td align="center">SEARCHING</td> |
| * <td align="center">Values not good after unlock</td> |
| * </tr> |
| * </tbody> |
| * </table> |
| * <p>For the above table, the camera device may skip reporting any state changes that happen |
| * without application intervention (i.e. mode switch, trigger, locking). Any state that |
| * can be skipped in that manner is called a transient state.</p> |
| * <p>For example, for this AWB mode (AWB_MODE_AUTO), in addition to the state transitions |
| * listed in above table, it is also legal for the camera device to skip one or more |
| * transient states between two results. See below table for examples:</p> |
| * <table> |
| * <thead> |
| * <tr> |
| * <th align="center">State</th> |
| * <th align="center">Transition Cause</th> |
| * <th align="center">New State</th> |
| * <th align="center">Notes</th> |
| * </tr> |
| * </thead> |
| * <tbody> |
| * <tr> |
| * <td align="center">INACTIVE</td> |
| * <td align="center">Camera device finished AWB scan</td> |
| * <td align="center">CONVERGED</td> |
| * <td align="center">Values are already good, transient states are skipped by camera device.</td> |
| * </tr> |
| * <tr> |
| * <td align="center">LOCKED</td> |
| * <td align="center">{@link CaptureRequest#CONTROL_AWB_LOCK android.control.awbLock} is OFF</td> |
| * <td align="center">CONVERGED</td> |
| * <td align="center">Values good after unlock, transient states are skipped by camera device.</td> |
| * </tr> |
| * </tbody> |
| * </table> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #CONTROL_AWB_STATE_INACTIVE INACTIVE}</li> |
| * <li>{@link #CONTROL_AWB_STATE_SEARCHING SEARCHING}</li> |
| * <li>{@link #CONTROL_AWB_STATE_CONVERGED CONVERGED}</li> |
| * <li>{@link #CONTROL_AWB_STATE_LOCKED LOCKED}</li> |
| * </ul></p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Limited capability</b> - |
| * Present on all camera devices that report being at least {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED HARDWARE_LEVEL_LIMITED} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CaptureRequest#CONTROL_AWB_LOCK |
| * @see CaptureRequest#CONTROL_AWB_MODE |
| * @see CaptureRequest#CONTROL_MODE |
| * @see CaptureRequest#CONTROL_SCENE_MODE |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see #CONTROL_AWB_STATE_INACTIVE |
| * @see #CONTROL_AWB_STATE_SEARCHING |
| * @see #CONTROL_AWB_STATE_CONVERGED |
| * @see #CONTROL_AWB_STATE_LOCKED |
| */ |
| @PublicKey |
| public static final Key<Integer> CONTROL_AWB_STATE = |
| new Key<Integer>("android.control.awbState", int.class); |
| |
| /** |
| * <p>A special color effect to apply.</p> |
| * <p>When this mode is set, a color effect will be applied |
| * to images produced by the camera device. The interpretation |
| * and implementation of these color effects is left to the |
| * implementor of the camera device, and should not be |
| * depended on to be consistent (or present) across all |
| * devices.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #CONTROL_EFFECT_MODE_OFF OFF}</li> |
| * <li>{@link #CONTROL_EFFECT_MODE_MONO MONO}</li> |
| * <li>{@link #CONTROL_EFFECT_MODE_NEGATIVE NEGATIVE}</li> |
| * <li>{@link #CONTROL_EFFECT_MODE_SOLARIZE SOLARIZE}</li> |
| * <li>{@link #CONTROL_EFFECT_MODE_SEPIA SEPIA}</li> |
| * <li>{@link #CONTROL_EFFECT_MODE_POSTERIZE POSTERIZE}</li> |
| * <li>{@link #CONTROL_EFFECT_MODE_WHITEBOARD WHITEBOARD}</li> |
| * <li>{@link #CONTROL_EFFECT_MODE_BLACKBOARD BLACKBOARD}</li> |
| * <li>{@link #CONTROL_EFFECT_MODE_AQUA AQUA}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br> |
| * {@link CameraCharacteristics#CONTROL_AVAILABLE_EFFECTS android.control.availableEffects}</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CameraCharacteristics#CONTROL_AVAILABLE_EFFECTS |
| * @see #CONTROL_EFFECT_MODE_OFF |
| * @see #CONTROL_EFFECT_MODE_MONO |
| * @see #CONTROL_EFFECT_MODE_NEGATIVE |
| * @see #CONTROL_EFFECT_MODE_SOLARIZE |
| * @see #CONTROL_EFFECT_MODE_SEPIA |
| * @see #CONTROL_EFFECT_MODE_POSTERIZE |
| * @see #CONTROL_EFFECT_MODE_WHITEBOARD |
| * @see #CONTROL_EFFECT_MODE_BLACKBOARD |
| * @see #CONTROL_EFFECT_MODE_AQUA |
| */ |
| @PublicKey |
| public static final Key<Integer> CONTROL_EFFECT_MODE = |
| new Key<Integer>("android.control.effectMode", int.class); |
| |
| /** |
| * <p>Overall mode of 3A (auto-exposure, auto-white-balance, auto-focus) control |
| * routines.</p> |
| * <p>This is a top-level 3A control switch. When set to OFF, all 3A control |
| * by the camera device is disabled. The application must set the fields for |
| * capture parameters itself.</p> |
| * <p>When set to AUTO, the individual algorithm controls in |
| * android.control.* are in effect, such as {@link CaptureRequest#CONTROL_AF_MODE android.control.afMode}.</p> |
| * <p>When set to USE_SCENE_MODE, the individual controls in |
| * android.control.* are mostly disabled, and the camera device implements |
| * one of the scene mode settings (such as ACTION, SUNSET, or PARTY) |
| * as it wishes. The camera device scene mode 3A settings are provided by |
| * {@link android.hardware.camera2.CaptureResult capture results}.</p> |
| * <p>When set to OFF_KEEP_STATE, it is similar to OFF mode, the only difference |
| * is that this frame will not be used by camera device background 3A statistics |
| * update, as if this frame is never captured. This mode can be used in the scenario |
| * where the application doesn't want a 3A manual control capture to affect |
| * the subsequent auto 3A capture results.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #CONTROL_MODE_OFF OFF}</li> |
| * <li>{@link #CONTROL_MODE_AUTO AUTO}</li> |
| * <li>{@link #CONTROL_MODE_USE_SCENE_MODE USE_SCENE_MODE}</li> |
| * <li>{@link #CONTROL_MODE_OFF_KEEP_STATE OFF_KEEP_STATE}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br> |
| * {@link CameraCharacteristics#CONTROL_AVAILABLE_MODES android.control.availableModes}</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CaptureRequest#CONTROL_AF_MODE |
| * @see CameraCharacteristics#CONTROL_AVAILABLE_MODES |
| * @see #CONTROL_MODE_OFF |
| * @see #CONTROL_MODE_AUTO |
| * @see #CONTROL_MODE_USE_SCENE_MODE |
| * @see #CONTROL_MODE_OFF_KEEP_STATE |
| */ |
| @PublicKey |
| public static final Key<Integer> CONTROL_MODE = |
| new Key<Integer>("android.control.mode", int.class); |
| |
| /** |
| * <p>Control for which scene mode is currently active.</p> |
| * <p>Scene modes are custom camera modes optimized for a certain set of conditions and |
| * capture settings.</p> |
| * <p>This is the mode that that is active when |
| * <code>{@link CaptureRequest#CONTROL_MODE android.control.mode} == USE_SCENE_MODE</code>. Aside from FACE_PRIORITY, these modes will |
| * disable {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode}, {@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode}, and {@link CaptureRequest#CONTROL_AF_MODE android.control.afMode} |
| * while in use.</p> |
| * <p>The interpretation and implementation of these scene modes is left |
| * to the implementor of the camera device. Their behavior will not be |
| * consistent across all devices, and any given device may only implement |
| * a subset of these modes.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #CONTROL_SCENE_MODE_DISABLED DISABLED}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_FACE_PRIORITY FACE_PRIORITY}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_ACTION ACTION}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_PORTRAIT PORTRAIT}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_LANDSCAPE LANDSCAPE}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_NIGHT NIGHT}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_NIGHT_PORTRAIT NIGHT_PORTRAIT}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_THEATRE THEATRE}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_BEACH BEACH}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_SNOW SNOW}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_SUNSET SUNSET}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_STEADYPHOTO STEADYPHOTO}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_FIREWORKS FIREWORKS}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_SPORTS SPORTS}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_PARTY PARTY}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_CANDLELIGHT CANDLELIGHT}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_BARCODE BARCODE}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_HIGH_SPEED_VIDEO HIGH_SPEED_VIDEO}</li> |
| * <li>{@link #CONTROL_SCENE_MODE_HDR HDR}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br> |
| * {@link CameraCharacteristics#CONTROL_AVAILABLE_SCENE_MODES android.control.availableSceneModes}</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CaptureRequest#CONTROL_AE_MODE |
| * @see CaptureRequest#CONTROL_AF_MODE |
| * @see CameraCharacteristics#CONTROL_AVAILABLE_SCENE_MODES |
| * @see CaptureRequest#CONTROL_AWB_MODE |
| * @see CaptureRequest#CONTROL_MODE |
| * @see #CONTROL_SCENE_MODE_DISABLED |
| * @see #CONTROL_SCENE_MODE_FACE_PRIORITY |
| * @see #CONTROL_SCENE_MODE_ACTION |
| * @see #CONTROL_SCENE_MODE_PORTRAIT |
| * @see #CONTROL_SCENE_MODE_LANDSCAPE |
| * @see #CONTROL_SCENE_MODE_NIGHT |
| * @see #CONTROL_SCENE_MODE_NIGHT_PORTRAIT |
| * @see #CONTROL_SCENE_MODE_THEATRE |
| * @see #CONTROL_SCENE_MODE_BEACH |
| * @see #CONTROL_SCENE_MODE_SNOW |
| * @see #CONTROL_SCENE_MODE_SUNSET |
| * @see #CONTROL_SCENE_MODE_STEADYPHOTO |
| * @see #CONTROL_SCENE_MODE_FIREWORKS |
| * @see #CONTROL_SCENE_MODE_SPORTS |
| * @see #CONTROL_SCENE_MODE_PARTY |
| * @see #CONTROL_SCENE_MODE_CANDLELIGHT |
| * @see #CONTROL_SCENE_MODE_BARCODE |
| * @see #CONTROL_SCENE_MODE_HIGH_SPEED_VIDEO |
| * @see #CONTROL_SCENE_MODE_HDR |
| */ |
| @PublicKey |
| public static final Key<Integer> CONTROL_SCENE_MODE = |
| new Key<Integer>("android.control.sceneMode", int.class); |
| |
| /** |
| * <p>Whether video stabilization is |
| * active.</p> |
| * <p>Video stabilization automatically warps images from |
| * the camera in order to stabilize motion between consecutive frames.</p> |
| * <p>If enabled, video stabilization can modify the |
| * {@link CaptureRequest#SCALER_CROP_REGION android.scaler.cropRegion} to keep the video stream stabilized.</p> |
| * <p>Switching between different video stabilization modes may take several |
| * frames to initialize, the camera device will report the current mode |
| * in capture result metadata. For example, When "ON" mode is requested, |
| * the video stabilization modes in the first several capture results may |
| * still be "OFF", and it will become "ON" when the initialization is |
| * done.</p> |
| * <p>In addition, not all recording sizes or frame rates may be supported for |
| * stabilization by a device that reports stabilization support. It is guaranteed |
| * that an output targeting a MediaRecorder or MediaCodec will be stabilized if |
| * the recording resolution is less than or equal to 1920 x 1080 (width less than |
| * or equal to 1920, height less than or equal to 1080), and the recording |
| * frame rate is less than or equal to 30fps. At other sizes, the CaptureResult |
| * {@link CaptureRequest#CONTROL_VIDEO_STABILIZATION_MODE android.control.videoStabilizationMode} field will return |
| * OFF if the recording output is not stabilized, or if there are no output |
| * Surface types that can be stabilized.</p> |
| * <p>If a camera device supports both this mode and OIS |
| * ({@link CaptureRequest#LENS_OPTICAL_STABILIZATION_MODE android.lens.opticalStabilizationMode}), turning both modes on may |
| * produce undesirable interaction, so it is recommended not to enable |
| * both at the same time.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #CONTROL_VIDEO_STABILIZATION_MODE_OFF OFF}</li> |
| * <li>{@link #CONTROL_VIDEO_STABILIZATION_MODE_ON ON}</li> |
| * </ul></p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CaptureRequest#CONTROL_VIDEO_STABILIZATION_MODE |
| * @see CaptureRequest#LENS_OPTICAL_STABILIZATION_MODE |
| * @see CaptureRequest#SCALER_CROP_REGION |
| * @see #CONTROL_VIDEO_STABILIZATION_MODE_OFF |
| * @see #CONTROL_VIDEO_STABILIZATION_MODE_ON |
| */ |
| @PublicKey |
| public static final Key<Integer> CONTROL_VIDEO_STABILIZATION_MODE = |
| new Key<Integer>("android.control.videoStabilizationMode", int.class); |
| |
| /** |
| * <p>Operation mode for edge |
| * enhancement.</p> |
| * <p>Edge enhancement improves sharpness and details in the captured image. OFF means |
| * no enhancement will be applied by the camera device.</p> |
| * <p>FAST/HIGH_QUALITY both mean camera device determined enhancement |
| * will be applied. HIGH_QUALITY mode indicates that the |
| * camera device will use the highest-quality enhancement algorithms, |
| * even if it slows down capture rate. FAST means the camera device will |
| * not slow down capture rate when applying edge enhancement. FAST may be the same as OFF if |
| * edge enhancement will slow down capture rate. Every output stream will have a similar |
| * amount of enhancement applied.</p> |
| * <p>ZERO_SHUTTER_LAG is meant to be used by applications that maintain a continuous circular |
| * buffer of high-resolution images during preview and reprocess image(s) from that buffer |
| * into a final capture when triggered by the user. In this mode, the camera device applies |
| * edge enhancement to low-resolution streams (below maximum recording resolution) to |
| * maximize preview quality, but does not apply edge enhancement to high-resolution streams, |
| * since those will be reprocessed later if necessary.</p> |
| * <p>For YUV_REPROCESSING, these FAST/HIGH_QUALITY modes both mean that the camera |
| * device will apply FAST/HIGH_QUALITY YUV-domain edge enhancement, respectively. |
| * The camera device may adjust its internal edge enhancement parameters for best |
| * image quality based on the {@link CaptureRequest#REPROCESS_EFFECTIVE_EXPOSURE_FACTOR android.reprocess.effectiveExposureFactor}, if it is set.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #EDGE_MODE_OFF OFF}</li> |
| * <li>{@link #EDGE_MODE_FAST FAST}</li> |
| * <li>{@link #EDGE_MODE_HIGH_QUALITY HIGH_QUALITY}</li> |
| * <li>{@link #EDGE_MODE_ZERO_SHUTTER_LAG ZERO_SHUTTER_LAG}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br> |
| * {@link CameraCharacteristics#EDGE_AVAILABLE_EDGE_MODES android.edge.availableEdgeModes}</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CameraCharacteristics#EDGE_AVAILABLE_EDGE_MODES |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CaptureRequest#REPROCESS_EFFECTIVE_EXPOSURE_FACTOR |
| * @see #EDGE_MODE_OFF |
| * @see #EDGE_MODE_FAST |
| * @see #EDGE_MODE_HIGH_QUALITY |
| * @see #EDGE_MODE_ZERO_SHUTTER_LAG |
| */ |
| @PublicKey |
| public static final Key<Integer> EDGE_MODE = |
| new Key<Integer>("android.edge.mode", int.class); |
| |
| /** |
| * <p>The desired mode for for the camera device's flash control.</p> |
| * <p>This control is only effective when flash unit is available |
| * (<code>{@link CameraCharacteristics#FLASH_INFO_AVAILABLE android.flash.info.available} == true</code>).</p> |
| * <p>When this control is used, the {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} must be set to ON or OFF. |
| * Otherwise, the camera device auto-exposure related flash control (ON_AUTO_FLASH, |
| * ON_ALWAYS_FLASH, or ON_AUTO_FLASH_REDEYE) will override this control.</p> |
| * <p>When set to OFF, the camera device will not fire flash for this capture.</p> |
| * <p>When set to SINGLE, the camera device will fire flash regardless of the camera |
| * device's auto-exposure routine's result. When used in still capture case, this |
| * control should be used along with auto-exposure (AE) precapture metering sequence |
| * ({@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger}), otherwise, the image may be incorrectly exposed.</p> |
| * <p>When set to TORCH, the flash will be on continuously. This mode can be used |
| * for use cases such as preview, auto-focus assist, still capture, or video recording.</p> |
| * <p>The flash status will be reported by {@link CaptureResult#FLASH_STATE android.flash.state} in the capture result metadata.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #FLASH_MODE_OFF OFF}</li> |
| * <li>{@link #FLASH_MODE_SINGLE SINGLE}</li> |
| * <li>{@link #FLASH_MODE_TORCH TORCH}</li> |
| * </ul></p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CaptureRequest#CONTROL_AE_MODE |
| * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER |
| * @see CameraCharacteristics#FLASH_INFO_AVAILABLE |
| * @see CaptureResult#FLASH_STATE |
| * @see #FLASH_MODE_OFF |
| * @see #FLASH_MODE_SINGLE |
| * @see #FLASH_MODE_TORCH |
| */ |
| @PublicKey |
| public static final Key<Integer> FLASH_MODE = |
| new Key<Integer>("android.flash.mode", int.class); |
| |
| /** |
| * <p>Current state of the flash |
| * unit.</p> |
| * <p>When the camera device doesn't have flash unit |
| * (i.e. <code>{@link CameraCharacteristics#FLASH_INFO_AVAILABLE android.flash.info.available} == false</code>), this state will always be UNAVAILABLE. |
| * Other states indicate the current flash status.</p> |
| * <p>In certain conditions, this will be available on LEGACY devices:</p> |
| * <ul> |
| * <li>Flash-less cameras always return UNAVAILABLE.</li> |
| * <li>Using {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} <code>==</code> ON_ALWAYS_FLASH |
| * will always return FIRED.</li> |
| * <li>Using {@link CaptureRequest#FLASH_MODE android.flash.mode} <code>==</code> TORCH |
| * will always return FIRED.</li> |
| * </ul> |
| * <p>In all other conditions the state will not be available on |
| * LEGACY devices (i.e. it will be <code>null</code>).</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #FLASH_STATE_UNAVAILABLE UNAVAILABLE}</li> |
| * <li>{@link #FLASH_STATE_CHARGING CHARGING}</li> |
| * <li>{@link #FLASH_STATE_READY READY}</li> |
| * <li>{@link #FLASH_STATE_FIRED FIRED}</li> |
| * <li>{@link #FLASH_STATE_PARTIAL PARTIAL}</li> |
| * </ul></p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Limited capability</b> - |
| * Present on all camera devices that report being at least {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED HARDWARE_LEVEL_LIMITED} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CaptureRequest#CONTROL_AE_MODE |
| * @see CameraCharacteristics#FLASH_INFO_AVAILABLE |
| * @see CaptureRequest#FLASH_MODE |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see #FLASH_STATE_UNAVAILABLE |
| * @see #FLASH_STATE_CHARGING |
| * @see #FLASH_STATE_READY |
| * @see #FLASH_STATE_FIRED |
| * @see #FLASH_STATE_PARTIAL |
| */ |
| @PublicKey |
| public static final Key<Integer> FLASH_STATE = |
| new Key<Integer>("android.flash.state", int.class); |
| |
| /** |
| * <p>Operational mode for hot pixel correction.</p> |
| * <p>Hotpixel correction interpolates out, or otherwise removes, pixels |
| * that do not accurately measure the incoming light (i.e. pixels that |
| * are stuck at an arbitrary value or are oversensitive).</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #HOT_PIXEL_MODE_OFF OFF}</li> |
| * <li>{@link #HOT_PIXEL_MODE_FAST FAST}</li> |
| * <li>{@link #HOT_PIXEL_MODE_HIGH_QUALITY HIGH_QUALITY}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br> |
| * {@link CameraCharacteristics#HOT_PIXEL_AVAILABLE_HOT_PIXEL_MODES android.hotPixel.availableHotPixelModes}</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * |
| * @see CameraCharacteristics#HOT_PIXEL_AVAILABLE_HOT_PIXEL_MODES |
| * @see #HOT_PIXEL_MODE_OFF |
| * @see #HOT_PIXEL_MODE_FAST |
| * @see #HOT_PIXEL_MODE_HIGH_QUALITY |
| */ |
| @PublicKey |
| public static final Key<Integer> HOT_PIXEL_MODE = |
| new Key<Integer>("android.hotPixel.mode", int.class); |
| |
| /** |
| * <p>A location object to use when generating image GPS metadata.</p> |
| * <p>Setting a location object in a request will include the GPS coordinates of the location |
| * into any JPEG images captured based on the request. These coordinates can then be |
| * viewed by anyone who receives the JPEG image.</p> |
| * <p>This key is available on all devices.</p> |
| */ |
| @PublicKey |
| @SyntheticKey |
| public static final Key<android.location.Location> JPEG_GPS_LOCATION = |
| new Key<android.location.Location>("android.jpeg.gpsLocation", android.location.Location.class); |
| |
| /** |
| * <p>GPS coordinates to include in output JPEG |
| * EXIF.</p> |
| * <p><b>Range of valid values:</b><br> |
| * (-180 - 180], [-90,90], [-inf, inf]</p> |
| * <p>This key is available on all devices.</p> |
| * @hide |
| */ |
| public static final Key<double[]> JPEG_GPS_COORDINATES = |
| new Key<double[]>("android.jpeg.gpsCoordinates", double[].class); |
| |
| /** |
| * <p>32 characters describing GPS algorithm to |
| * include in EXIF.</p> |
| * <p><b>Units</b>: UTF-8 null-terminated string</p> |
| * <p>This key is available on all devices.</p> |
| * @hide |
| */ |
| public static final Key<String> JPEG_GPS_PROCESSING_METHOD = |
| new Key<String>("android.jpeg.gpsProcessingMethod", String.class); |
| |
| /** |
| * <p>Time GPS fix was made to include in |
| * EXIF.</p> |
| * <p><b>Units</b>: UTC in seconds since January 1, 1970</p> |
| * <p>This key is available on all devices.</p> |
| * @hide |
| */ |
| public static final Key<Long> JPEG_GPS_TIMESTAMP = |
| new Key<Long>("android.jpeg.gpsTimestamp", long.class); |
| |
| /** |
| * <p>The orientation for a JPEG image.</p> |
| * <p>The clockwise rotation angle in degrees, relative to the orientation |
| * to the camera, that the JPEG picture needs to be rotated by, to be viewed |
| * upright.</p> |
| * <p>Camera devices may either encode this value into the JPEG EXIF header, or |
| * rotate the image data to match this orientation. When the image data is rotated, |
| * the thumbnail data will also be rotated.</p> |
| * <p>Note that this orientation is relative to the orientation of the camera sensor, given |
| * by {@link CameraCharacteristics#SENSOR_ORIENTATION android.sensor.orientation}.</p> |
| * <p>To translate from the device orientation given by the Android sensor APIs, the following |
| * sample code may be used:</p> |
| * <pre><code>private int getJpegOrientation(CameraCharacteristics c, int deviceOrientation) { |
| * if (deviceOrientation == android.view.OrientationEventListener.ORIENTATION_UNKNOWN) return 0; |
| * int sensorOrientation = c.get(CameraCharacteristics.SENSOR_ORIENTATION); |
| * |
| * // Round device orientation to a multiple of 90 |
| * deviceOrientation = (deviceOrientation + 45) / 90 * 90; |
| * |
| * // Reverse device orientation for front-facing cameras |
| * boolean facingFront = c.get(CameraCharacteristics.LENS_FACING) == CameraCharacteristics.LENS_FACING_FRONT; |
| * if (facingFront) deviceOrientation = -deviceOrientation; |
| * |
| * // Calculate desired JPEG orientation relative to camera orientation to make |
| * // the image upright relative to the device orientation |
| * int jpegOrientation = (sensorOrientation + deviceOrientation + 360) % 360; |
| * |
| * return jpegOrientation; |
| * } |
| * </code></pre> |
| * <p><b>Units</b>: Degrees in multiples of 90</p> |
| * <p><b>Range of valid values:</b><br> |
| * 0, 90, 180, 270</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CameraCharacteristics#SENSOR_ORIENTATION |
| */ |
| @PublicKey |
| public static final Key<Integer> JPEG_ORIENTATION = |
| new Key<Integer>("android.jpeg.orientation", int.class); |
| |
| /** |
| * <p>Compression quality of the final JPEG |
| * image.</p> |
| * <p>85-95 is typical usage range.</p> |
| * <p><b>Range of valid values:</b><br> |
| * 1-100; larger is higher quality</p> |
| * <p>This key is available on all devices.</p> |
| */ |
| @PublicKey |
| public static final Key<Byte> JPEG_QUALITY = |
| new Key<Byte>("android.jpeg.quality", byte.class); |
| |
| /** |
| * <p>Compression quality of JPEG |
| * thumbnail.</p> |
| * <p><b>Range of valid values:</b><br> |
| * 1-100; larger is higher quality</p> |
| * <p>This key is available on all devices.</p> |
| */ |
| @PublicKey |
| public static final Key<Byte> JPEG_THUMBNAIL_QUALITY = |
| new Key<Byte>("android.jpeg.thumbnailQuality", byte.class); |
| |
| /** |
| * <p>Resolution of embedded JPEG thumbnail.</p> |
| * <p>When set to (0, 0) value, the JPEG EXIF will not contain thumbnail, |
| * but the captured JPEG will still be a valid image.</p> |
| * <p>For best results, when issuing a request for a JPEG image, the thumbnail size selected |
| * should have the same aspect ratio as the main JPEG output.</p> |
| * <p>If the thumbnail image aspect ratio differs from the JPEG primary image aspect |
| * ratio, the camera device creates the thumbnail by cropping it from the primary image. |
| * For example, if the primary image has 4:3 aspect ratio, the thumbnail image has |
| * 16:9 aspect ratio, the primary image will be cropped vertically (letterbox) to |
| * generate the thumbnail image. The thumbnail image will always have a smaller Field |
| * Of View (FOV) than the primary image when aspect ratios differ.</p> |
| * <p>When an {@link CaptureRequest#JPEG_ORIENTATION android.jpeg.orientation} of non-zero degree is requested, |
| * the camera device will handle thumbnail rotation in one of the following ways:</p> |
| * <ul> |
| * <li>Set the {@link android.media.ExifInterface#TAG_ORIENTATION EXIF orientation flag} |
| * and keep jpeg and thumbnail image data unrotated.</li> |
| * <li>Rotate the jpeg and thumbnail image data and not set |
| * {@link android.media.ExifInterface#TAG_ORIENTATION EXIF orientation flag}. In this |
| * case, LIMITED or FULL hardware level devices will report rotated thumnail size in |
| * capture result, so the width and height will be interchanged if 90 or 270 degree |
| * orientation is requested. LEGACY device will always report unrotated thumbnail |
| * size.</li> |
| * </ul> |
| * <p><b>Range of valid values:</b><br> |
| * {@link CameraCharacteristics#JPEG_AVAILABLE_THUMBNAIL_SIZES android.jpeg.availableThumbnailSizes}</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CameraCharacteristics#JPEG_AVAILABLE_THUMBNAIL_SIZES |
| * @see CaptureRequest#JPEG_ORIENTATION |
| */ |
| @PublicKey |
| public static final Key<android.util.Size> JPEG_THUMBNAIL_SIZE = |
| new Key<android.util.Size>("android.jpeg.thumbnailSize", android.util.Size.class); |
| |
| /** |
| * <p>The desired lens aperture size, as a ratio of lens focal length to the |
| * effective aperture diameter.</p> |
| * <p>Setting this value is only supported on the camera devices that have a variable |
| * aperture lens.</p> |
| * <p>When this is supported and {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} is OFF, |
| * this can be set along with {@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime}, |
| * {@link CaptureRequest#SENSOR_SENSITIVITY android.sensor.sensitivity}, and {@link CaptureRequest#SENSOR_FRAME_DURATION android.sensor.frameDuration} |
| * to achieve manual exposure control.</p> |
| * <p>The requested aperture value may take several frames to reach the |
| * requested value; the camera device will report the current (intermediate) |
| * aperture size in capture result metadata while the aperture is changing. |
| * While the aperture is still changing, {@link CaptureResult#LENS_STATE android.lens.state} will be set to MOVING.</p> |
| * <p>When this is supported and {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} is one of |
| * the ON modes, this will be overridden by the camera device |
| * auto-exposure algorithm, the overridden values are then provided |
| * back to the user in the corresponding result.</p> |
| * <p><b>Units</b>: The f-number (f/N)</p> |
| * <p><b>Range of valid values:</b><br> |
| * {@link CameraCharacteristics#LENS_INFO_AVAILABLE_APERTURES android.lens.info.availableApertures}</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CaptureRequest#CONTROL_AE_MODE |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CameraCharacteristics#LENS_INFO_AVAILABLE_APERTURES |
| * @see CaptureResult#LENS_STATE |
| * @see CaptureRequest#SENSOR_EXPOSURE_TIME |
| * @see CaptureRequest#SENSOR_FRAME_DURATION |
| * @see CaptureRequest#SENSOR_SENSITIVITY |
| */ |
| @PublicKey |
| public static final Key<Float> LENS_APERTURE = |
| new Key<Float>("android.lens.aperture", float.class); |
| |
| /** |
| * <p>The desired setting for the lens neutral density filter(s).</p> |
| * <p>This control will not be supported on most camera devices.</p> |
| * <p>Lens filters are typically used to lower the amount of light the |
| * sensor is exposed to (measured in steps of EV). As used here, an EV |
| * step is the standard logarithmic representation, which are |
| * non-negative, and inversely proportional to the amount of light |
| * hitting the sensor. For example, setting this to 0 would result |
| * in no reduction of the incoming light, and setting this to 2 would |
| * mean that the filter is set to reduce incoming light by two stops |
| * (allowing 1/4 of the prior amount of light to the sensor).</p> |
| * <p>It may take several frames before the lens filter density changes |
| * to the requested value. While the filter density is still changing, |
| * {@link CaptureResult#LENS_STATE android.lens.state} will be set to MOVING.</p> |
| * <p><b>Units</b>: Exposure Value (EV)</p> |
| * <p><b>Range of valid values:</b><br> |
| * {@link CameraCharacteristics#LENS_INFO_AVAILABLE_FILTER_DENSITIES android.lens.info.availableFilterDensities}</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CameraCharacteristics#LENS_INFO_AVAILABLE_FILTER_DENSITIES |
| * @see CaptureResult#LENS_STATE |
| */ |
| @PublicKey |
| public static final Key<Float> LENS_FILTER_DENSITY = |
| new Key<Float>("android.lens.filterDensity", float.class); |
| |
| /** |
| * <p>The desired lens focal length; used for optical zoom.</p> |
| * <p>This setting controls the physical focal length of the camera |
| * device's lens. Changing the focal length changes the field of |
| * view of the camera device, and is usually used for optical zoom.</p> |
| * <p>Like {@link CaptureRequest#LENS_FOCUS_DISTANCE android.lens.focusDistance} and {@link CaptureRequest#LENS_APERTURE android.lens.aperture}, this |
| * setting won't be applied instantaneously, and it may take several |
| * frames before the lens can change to the requested focal length. |
| * While the focal length is still changing, {@link CaptureResult#LENS_STATE android.lens.state} will |
| * be set to MOVING.</p> |
| * <p>Optical zoom will not be supported on most devices.</p> |
| * <p><b>Units</b>: Millimeters</p> |
| * <p><b>Range of valid values:</b><br> |
| * {@link CameraCharacteristics#LENS_INFO_AVAILABLE_FOCAL_LENGTHS android.lens.info.availableFocalLengths}</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CaptureRequest#LENS_APERTURE |
| * @see CaptureRequest#LENS_FOCUS_DISTANCE |
| * @see CameraCharacteristics#LENS_INFO_AVAILABLE_FOCAL_LENGTHS |
| * @see CaptureResult#LENS_STATE |
| */ |
| @PublicKey |
| public static final Key<Float> LENS_FOCAL_LENGTH = |
| new Key<Float>("android.lens.focalLength", float.class); |
| |
| /** |
| * <p>Desired distance to plane of sharpest focus, |
| * measured from frontmost surface of the lens.</p> |
| * <p>Should be zero for fixed-focus cameras</p> |
| * <p><b>Units</b>: See {@link CameraCharacteristics#LENS_INFO_FOCUS_DISTANCE_CALIBRATION android.lens.info.focusDistanceCalibration} for details</p> |
| * <p><b>Range of valid values:</b><br> |
| * >= 0</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CameraCharacteristics#LENS_INFO_FOCUS_DISTANCE_CALIBRATION |
| */ |
| @PublicKey |
| public static final Key<Float> LENS_FOCUS_DISTANCE = |
| new Key<Float>("android.lens.focusDistance", float.class); |
| |
| /** |
| * <p>The range of scene distances that are in |
| * sharp focus (depth of field).</p> |
| * <p>If variable focus not supported, can still report |
| * fixed depth of field range</p> |
| * <p><b>Units</b>: A pair of focus distances in diopters: (near, |
| * far); see {@link CameraCharacteristics#LENS_INFO_FOCUS_DISTANCE_CALIBRATION android.lens.info.focusDistanceCalibration} for details.</p> |
| * <p><b>Range of valid values:</b><br> |
| * >=0</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Limited capability</b> - |
| * Present on all camera devices that report being at least {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED HARDWARE_LEVEL_LIMITED} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CameraCharacteristics#LENS_INFO_FOCUS_DISTANCE_CALIBRATION |
| */ |
| @PublicKey |
| public static final Key<android.util.Pair<Float,Float>> LENS_FOCUS_RANGE = |
| new Key<android.util.Pair<Float,Float>>("android.lens.focusRange", new TypeReference<android.util.Pair<Float,Float>>() {{ }}); |
| |
| /** |
| * <p>Sets whether the camera device uses optical image stabilization (OIS) |
| * when capturing images.</p> |
| * <p>OIS is used to compensate for motion blur due to small |
| * movements of the camera during capture. Unlike digital image |
| * stabilization ({@link CaptureRequest#CONTROL_VIDEO_STABILIZATION_MODE android.control.videoStabilizationMode}), OIS |
| * makes use of mechanical elements to stabilize the camera |
| * sensor, and thus allows for longer exposure times before |
| * camera shake becomes apparent.</p> |
| * <p>Switching between different optical stabilization modes may take several |
| * frames to initialize, the camera device will report the current mode in |
| * capture result metadata. For example, When "ON" mode is requested, the |
| * optical stabilization modes in the first several capture results may still |
| * be "OFF", and it will become "ON" when the initialization is done.</p> |
| * <p>If a camera device supports both OIS and digital image stabilization |
| * ({@link CaptureRequest#CONTROL_VIDEO_STABILIZATION_MODE android.control.videoStabilizationMode}), turning both modes on may produce undesirable |
| * interaction, so it is recommended not to enable both at the same time.</p> |
| * <p>Not all devices will support OIS; see |
| * {@link CameraCharacteristics#LENS_INFO_AVAILABLE_OPTICAL_STABILIZATION android.lens.info.availableOpticalStabilization} for |
| * available controls.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #LENS_OPTICAL_STABILIZATION_MODE_OFF OFF}</li> |
| * <li>{@link #LENS_OPTICAL_STABILIZATION_MODE_ON ON}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br> |
| * {@link CameraCharacteristics#LENS_INFO_AVAILABLE_OPTICAL_STABILIZATION android.lens.info.availableOpticalStabilization}</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Limited capability</b> - |
| * Present on all camera devices that report being at least {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED HARDWARE_LEVEL_LIMITED} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CaptureRequest#CONTROL_VIDEO_STABILIZATION_MODE |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CameraCharacteristics#LENS_INFO_AVAILABLE_OPTICAL_STABILIZATION |
| * @see #LENS_OPTICAL_STABILIZATION_MODE_OFF |
| * @see #LENS_OPTICAL_STABILIZATION_MODE_ON |
| */ |
| @PublicKey |
| public static final Key<Integer> LENS_OPTICAL_STABILIZATION_MODE = |
| new Key<Integer>("android.lens.opticalStabilizationMode", int.class); |
| |
| /** |
| * <p>Current lens status.</p> |
| * <p>For lens parameters {@link CaptureRequest#LENS_FOCAL_LENGTH android.lens.focalLength}, {@link CaptureRequest#LENS_FOCUS_DISTANCE android.lens.focusDistance}, |
| * {@link CaptureRequest#LENS_FILTER_DENSITY android.lens.filterDensity} and {@link CaptureRequest#LENS_APERTURE android.lens.aperture}, when changes are requested, |
| * they may take several frames to reach the requested values. This state indicates |
| * the current status of the lens parameters.</p> |
| * <p>When the state is STATIONARY, the lens parameters are not changing. This could be |
| * either because the parameters are all fixed, or because the lens has had enough |
| * time to reach the most recently-requested values. |
| * If all these lens parameters are not changable for a camera device, as listed below:</p> |
| * <ul> |
| * <li>Fixed focus (<code>{@link CameraCharacteristics#LENS_INFO_MINIMUM_FOCUS_DISTANCE android.lens.info.minimumFocusDistance} == 0</code>), which means |
| * {@link CaptureRequest#LENS_FOCUS_DISTANCE android.lens.focusDistance} parameter will always be 0.</li> |
| * <li>Fixed focal length ({@link CameraCharacteristics#LENS_INFO_AVAILABLE_FOCAL_LENGTHS android.lens.info.availableFocalLengths} contains single value), |
| * which means the optical zoom is not supported.</li> |
| * <li>No ND filter ({@link CameraCharacteristics#LENS_INFO_AVAILABLE_FILTER_DENSITIES android.lens.info.availableFilterDensities} contains only 0).</li> |
| * <li>Fixed aperture ({@link CameraCharacteristics#LENS_INFO_AVAILABLE_APERTURES android.lens.info.availableApertures} contains single value).</li> |
| * </ul> |
| * <p>Then this state will always be STATIONARY.</p> |
| * <p>When the state is MOVING, it indicates that at least one of the lens parameters |
| * is changing.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #LENS_STATE_STATIONARY STATIONARY}</li> |
| * <li>{@link #LENS_STATE_MOVING MOVING}</li> |
| * </ul></p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Limited capability</b> - |
| * Present on all camera devices that report being at least {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED HARDWARE_LEVEL_LIMITED} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CaptureRequest#LENS_APERTURE |
| * @see CaptureRequest#LENS_FILTER_DENSITY |
| * @see CaptureRequest#LENS_FOCAL_LENGTH |
| * @see CaptureRequest#LENS_FOCUS_DISTANCE |
| * @see CameraCharacteristics#LENS_INFO_AVAILABLE_APERTURES |
| * @see CameraCharacteristics#LENS_INFO_AVAILABLE_FILTER_DENSITIES |
| * @see CameraCharacteristics#LENS_INFO_AVAILABLE_FOCAL_LENGTHS |
| * @see CameraCharacteristics#LENS_INFO_MINIMUM_FOCUS_DISTANCE |
| * @see #LENS_STATE_STATIONARY |
| * @see #LENS_STATE_MOVING |
| */ |
| @PublicKey |
| public static final Key<Integer> LENS_STATE = |
| new Key<Integer>("android.lens.state", int.class); |
| |
| /** |
| * <p>The orientation of the camera relative to the sensor |
| * coordinate system.</p> |
| * <p>The four coefficients that describe the quarternion |
| * rotation from the Android sensor coordinate system to a |
| * camera-aligned coordinate system where the X-axis is |
| * aligned with the long side of the image sensor, the Y-axis |
| * is aligned with the short side of the image sensor, and |
| * the Z-axis is aligned with the optical axis of the sensor.</p> |
| * <p>To convert from the quarternion coefficients <code>(x,y,z,w)</code> |
| * to the axis of rotation <code>(a_x, a_y, a_z)</code> and rotation |
| * amount <code>theta</code>, the following formulas can be used:</p> |
| * <pre><code> theta = 2 * acos(w) |
| * a_x = x / sin(theta/2) |
| * a_y = y / sin(theta/2) |
| * a_z = z / sin(theta/2) |
| * </code></pre> |
| * <p>To create a 3x3 rotation matrix that applies the rotation |
| * defined by this quarternion, the following matrix can be |
| * used:</p> |
| * <pre><code>R = [ 1 - 2y^2 - 2z^2, 2xy - 2zw, 2xz + 2yw, |
| * 2xy + 2zw, 1 - 2x^2 - 2z^2, 2yz - 2xw, |
| * 2xz - 2yw, 2yz + 2xw, 1 - 2x^2 - 2y^2 ] |
| * </code></pre> |
| * <p>This matrix can then be used to apply the rotation to a |
| * column vector point with</p> |
| * <p><code>p' = Rp</code></p> |
| * <p>where <code>p</code> is in the device sensor coordinate system, and |
| * <code>p'</code> is in the camera-oriented coordinate system.</p> |
| * <p><b>Units</b>: |
| * Quarternion coefficients</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| */ |
| @PublicKey |
| public static final Key<float[]> LENS_POSE_ROTATION = |
| new Key<float[]>("android.lens.poseRotation", float[].class); |
| |
| /** |
| * <p>Position of the camera optical center.</p> |
| * <p>The position of the camera device's lens optical center, |
| * as a three-dimensional vector <code>(x,y,z)</code>, relative to the |
| * optical center of the largest camera device facing in the |
| * same direction as this camera, in the {@link android.hardware.SensorEvent Android sensor coordinate |
| * axes}. Note that only the axis definitions are shared with |
| * the sensor coordinate system, but not the origin.</p> |
| * <p>If this device is the largest or only camera device with a |
| * given facing, then this position will be <code>(0, 0, 0)</code>; a |
| * camera device with a lens optical center located 3 cm from |
| * the main sensor along the +X axis (to the right from the |
| * user's perspective) will report <code>(0.03, 0, 0)</code>.</p> |
| * <p>To transform a pixel coordinates between two cameras |
| * facing the same direction, first the source camera |
| * android.lens.radialDistortion must be corrected for. Then |
| * the source camera android.lens.intrinsicCalibration needs |
| * to be applied, followed by the {@link CameraCharacteristics#LENS_POSE_ROTATION android.lens.poseRotation} |
| * of the source camera, the translation of the source camera |
| * relative to the destination camera, the |
| * {@link CameraCharacteristics#LENS_POSE_ROTATION android.lens.poseRotation} of the destination camera, and |
| * finally the inverse of android.lens.intrinsicCalibration |
| * of the destination camera. This obtains a |
| * radial-distortion-free coordinate in the destination |
| * camera pixel coordinates.</p> |
| * <p>To compare this against a real image from the destination |
| * camera, the destination camera image then needs to be |
| * corrected for radial distortion before comparison or |
| * sampling.</p> |
| * <p><b>Units</b>: Meters</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * |
| * @see CameraCharacteristics#LENS_POSE_ROTATION |
| */ |
| @PublicKey |
| public static final Key<float[]> LENS_POSE_TRANSLATION = |
| new Key<float[]>("android.lens.poseTranslation", float[].class); |
| |
| /** |
| * <p>The parameters for this camera device's intrinsic |
| * calibration.</p> |
| * <p>The five calibration parameters that describe the |
| * transform from camera-centric 3D coordinates to sensor |
| * pixel coordinates:</p> |
| * <pre><code>[f_x, f_y, c_x, c_y, s] |
| * </code></pre> |
| * <p>Where <code>f_x</code> and <code>f_y</code> are the horizontal and vertical |
| * focal lengths, <code>[c_x, c_y]</code> is the position of the optical |
| * axis, and <code>s</code> is a skew parameter for the sensor plane not |
| * being aligned with the lens plane.</p> |
| * <p>These are typically used within a transformation matrix K:</p> |
| * <pre><code>K = [ f_x, s, c_x, |
| * 0, f_y, c_y, |
| * 0 0, 1 ] |
| * </code></pre> |
| * <p>which can then be combined with the camera pose rotation |
| * <code>R</code> and translation <code>t</code> ({@link CameraCharacteristics#LENS_POSE_ROTATION android.lens.poseRotation} and |
| * {@link CameraCharacteristics#LENS_POSE_TRANSLATION android.lens.poseTranslation}, respective) to calculate the |
| * complete transform from world coordinates to pixel |
| * coordinates:</p> |
| * <pre><code>P = [ K 0 * [ R t |
| * 0 1 ] 0 1 ] |
| * </code></pre> |
| * <p>and with <code>p_w</code> being a point in the world coordinate system |
| * and <code>p_s</code> being a point in the camera active pixel array |
| * coordinate system, and with the mapping including the |
| * homogeneous division by z:</p> |
| * <pre><code> p_h = (x_h, y_h, z_h) = P p_w |
| * p_s = p_h / z_h |
| * </code></pre> |
| * <p>so <code>[x_s, y_s]</code> is the pixel coordinates of the world |
| * point, <code>z_s = 1</code>, and <code>w_s</code> is a measurement of disparity |
| * (depth) in pixel coordinates.</p> |
| * <p>Note that the coordinate system for this transform is the |
| * {@link CameraCharacteristics#SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE android.sensor.info.preCorrectionActiveArraySize} system, |
| * where <code>(0,0)</code> is the top-left of the |
| * preCorrectionActiveArraySize rectangle. Once the pose and |
| * intrinsic calibration transforms have been applied to a |
| * world point, then the android.lens.radialDistortion |
| * transform needs to be applied, and the result adjusted to |
| * be in the {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize} coordinate |
| * system (where <code>(0, 0)</code> is the top-left of the |
| * activeArraySize rectangle), to determine the final pixel |
| * coordinate of the world point for processed (non-RAW) |
| * output buffers.</p> |
| * <p><b>Units</b>: |
| * Pixels in the |
| * {@link CameraCharacteristics#SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE android.sensor.info.preCorrectionActiveArraySize} |
| * coordinate system.</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * |
| * @see CameraCharacteristics#LENS_POSE_ROTATION |
| * @see CameraCharacteristics#LENS_POSE_TRANSLATION |
| * @see CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE |
| * @see CameraCharacteristics#SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE |
| */ |
| @PublicKey |
| public static final Key<float[]> LENS_INTRINSIC_CALIBRATION = |
| new Key<float[]>("android.lens.intrinsicCalibration", float[].class); |
| |
| /** |
| * <p>The correction coefficients to correct for this camera device's |
| * radial and tangential lens distortion.</p> |
| * <p>Four radial distortion coefficients <code>[kappa_0, kappa_1, kappa_2, |
| * kappa_3]</code> and two tangential distortion coefficients |
| * <code>[kappa_4, kappa_5]</code> that can be used to correct the |
| * lens's geometric distortion with the mapping equations:</p> |
| * <pre><code> x_c = x_i * ( kappa_0 + kappa_1 * r^2 + kappa_2 * r^4 + kappa_3 * r^6 ) + |
| * kappa_4 * (2 * x_i * y_i) + kappa_5 * ( r^2 + 2 * x_i^2 ) |
| * y_c = y_i * ( kappa_0 + kappa_1 * r^2 + kappa_2 * r^4 + kappa_3 * r^6 ) + |
| * kappa_5 * (2 * x_i * y_i) + kappa_4 * ( r^2 + 2 * y_i^2 ) |
| * </code></pre> |
| * <p>Here, <code>[x_c, y_c]</code> are the coordinates to sample in the |
| * input image that correspond to the pixel values in the |
| * corrected image at the coordinate <code>[x_i, y_i]</code>:</p> |
| * <pre><code> correctedImage(x_i, y_i) = sample_at(x_c, y_c, inputImage) |
| * </code></pre> |
| * <p>The pixel coordinates are defined in a normalized |
| * coordinate system related to the |
| * android.lens.intrinsicCalibration calibration fields. |
| * Both <code>[x_i, y_i]</code> and <code>[x_c, y_c]</code> have <code>(0,0)</code> at the |
| * lens optical center <code>[c_x, c_y]</code>. The maximum magnitudes |
| * of both x and y coordinates are normalized to be 1 at the |
| * edge further from the optical center, so the range |
| * for both dimensions is <code>-1 <= x <= 1</code>.</p> |
| * <p>Finally, <code>r</code> represents the radial distance from the |
| * optical center, <code>r^2 = x_i^2 + y_i^2</code>, and its magnitude |
| * is therefore no larger than <code>|r| <= sqrt(2)</code>.</p> |
| * <p>The distortion model used is the Brown-Conrady model.</p> |
| * <p><b>Units</b>: |
| * Unitless coefficients.</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| */ |
| @PublicKey |
| public static final Key<float[]> LENS_RADIAL_DISTORTION = |
| new Key<float[]>("android.lens.radialDistortion", float[].class); |
| |
| /** |
| * <p>Mode of operation for the noise reduction algorithm.</p> |
| * <p>The noise reduction algorithm attempts to improve image quality by removing |
| * excessive noise added by the capture process, especially in dark conditions.</p> |
| * <p>OFF means no noise reduction will be applied by the camera device, for both raw and |
| * YUV domain.</p> |
| * <p>MINIMAL means that only sensor raw domain basic noise reduction is enabled ,to remove |
| * demosaicing or other processing artifacts. For YUV_REPROCESSING, MINIMAL is same as OFF. |
| * This mode is optional, may not be support by all devices. The application should check |
| * {@link CameraCharacteristics#NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES android.noiseReduction.availableNoiseReductionModes} before using it.</p> |
| * <p>FAST/HIGH_QUALITY both mean camera device determined noise filtering |
| * will be applied. HIGH_QUALITY mode indicates that the camera device |
| * will use the highest-quality noise filtering algorithms, |
| * even if it slows down capture rate. FAST means the camera device will not |
| * slow down capture rate when applying noise filtering. FAST may be the same as MINIMAL if |
| * MINIMAL is listed, or the same as OFF if any noise filtering will slow down capture rate. |
| * Every output stream will have a similar amount of enhancement applied.</p> |
| * <p>ZERO_SHUTTER_LAG is meant to be used by applications that maintain a continuous circular |
| * buffer of high-resolution images during preview and reprocess image(s) from that buffer |
| * into a final capture when triggered by the user. In this mode, the camera device applies |
| * noise reduction to low-resolution streams (below maximum recording resolution) to maximize |
| * preview quality, but does not apply noise reduction to high-resolution streams, since |
| * those will be reprocessed later if necessary.</p> |
| * <p>For YUV_REPROCESSING, these FAST/HIGH_QUALITY modes both mean that the camera device |
| * will apply FAST/HIGH_QUALITY YUV domain noise reduction, respectively. The camera device |
| * may adjust the noise reduction parameters for best image quality based on the |
| * {@link CaptureRequest#REPROCESS_EFFECTIVE_EXPOSURE_FACTOR android.reprocess.effectiveExposureFactor} if it is set.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #NOISE_REDUCTION_MODE_OFF OFF}</li> |
| * <li>{@link #NOISE_REDUCTION_MODE_FAST FAST}</li> |
| * <li>{@link #NOISE_REDUCTION_MODE_HIGH_QUALITY HIGH_QUALITY}</li> |
| * <li>{@link #NOISE_REDUCTION_MODE_MINIMAL MINIMAL}</li> |
| * <li>{@link #NOISE_REDUCTION_MODE_ZERO_SHUTTER_LAG ZERO_SHUTTER_LAG}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br> |
| * {@link CameraCharacteristics#NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES android.noiseReduction.availableNoiseReductionModes}</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CameraCharacteristics#NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES |
| * @see CaptureRequest#REPROCESS_EFFECTIVE_EXPOSURE_FACTOR |
| * @see #NOISE_REDUCTION_MODE_OFF |
| * @see #NOISE_REDUCTION_MODE_FAST |
| * @see #NOISE_REDUCTION_MODE_HIGH_QUALITY |
| * @see #NOISE_REDUCTION_MODE_MINIMAL |
| * @see #NOISE_REDUCTION_MODE_ZERO_SHUTTER_LAG |
| */ |
| @PublicKey |
| public static final Key<Integer> NOISE_REDUCTION_MODE = |
| new Key<Integer>("android.noiseReduction.mode", int.class); |
| |
| /** |
| * <p>Whether a result given to the framework is the |
| * final one for the capture, or only a partial that contains a |
| * subset of the full set of dynamic metadata |
| * values.</p> |
| * <p>The entries in the result metadata buffers for a |
| * single capture may not overlap, except for this entry. The |
| * FINAL buffers must retain FIFO ordering relative to the |
| * requests that generate them, so the FINAL buffer for frame 3 must |
| * always be sent to the framework after the FINAL buffer for frame 2, and |
| * before the FINAL buffer for frame 4. PARTIAL buffers may be returned |
| * in any order relative to other frames, but all PARTIAL buffers for a given |
| * capture must arrive before the FINAL buffer for that capture. This entry may |
| * only be used by the camera device if quirks.usePartialResult is set to 1.</p> |
| * <p><b>Range of valid values:</b><br> |
| * Optional. Default value is FINAL.</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * @deprecated |
| * @hide |
| */ |
| @Deprecated |
| public static final Key<Boolean> QUIRKS_PARTIAL_RESULT = |
| new Key<Boolean>("android.quirks.partialResult", boolean.class); |
| |
| /** |
| * <p>A frame counter set by the framework. This value monotonically |
| * increases with every new result (that is, each new result has a unique |
| * frameCount value).</p> |
| * <p>Reset on release()</p> |
| * <p><b>Units</b>: count of frames</p> |
| * <p><b>Range of valid values:</b><br> |
| * > 0</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * @deprecated |
| * @hide |
| */ |
| @Deprecated |
| public static final Key<Integer> REQUEST_FRAME_COUNT = |
| new Key<Integer>("android.request.frameCount", int.class); |
| |
| /** |
| * <p>An application-specified ID for the current |
| * request. Must be maintained unchanged in output |
| * frame</p> |
| * <p><b>Units</b>: arbitrary integer assigned by application</p> |
| * <p><b>Range of valid values:</b><br> |
| * Any int</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * @hide |
| */ |
| public static final Key<Integer> REQUEST_ID = |
| new Key<Integer>("android.request.id", int.class); |
| |
| /** |
| * <p>Specifies the number of pipeline stages the frame went |
| * through from when it was exposed to when the final completed result |
| * was available to the framework.</p> |
| * <p>Depending on what settings are used in the request, and |
| * what streams are configured, the data may undergo less processing, |
| * and some pipeline stages skipped.</p> |
| * <p>See {@link CameraCharacteristics#REQUEST_PIPELINE_MAX_DEPTH android.request.pipelineMaxDepth} for more details.</p> |
| * <p><b>Range of valid values:</b><br> |
| * <= {@link CameraCharacteristics#REQUEST_PIPELINE_MAX_DEPTH android.request.pipelineMaxDepth}</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CameraCharacteristics#REQUEST_PIPELINE_MAX_DEPTH |
| */ |
| @PublicKey |
| public static final Key<Byte> REQUEST_PIPELINE_DEPTH = |
| new Key<Byte>("android.request.pipelineDepth", byte.class); |
| |
| /** |
| * <p>The desired region of the sensor to read out for this capture.</p> |
| * <p>This control can be used to implement digital zoom.</p> |
| * <p>The crop region coordinate system is based off |
| * {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}, with <code>(0, 0)</code> being the |
| * top-left corner of the sensor active array.</p> |
| * <p>Output streams use this rectangle to produce their output, |
| * cropping to a smaller region if necessary to maintain the |
| * stream's aspect ratio, then scaling the sensor input to |
| * match the output's configured resolution.</p> |
| * <p>The crop region is applied after the RAW to other color |
| * space (e.g. YUV) conversion. Since raw streams |
| * (e.g. RAW16) don't have the conversion stage, they are not |
| * croppable. The crop region will be ignored by raw streams.</p> |
| * <p>For non-raw streams, any additional per-stream cropping will |
| * be done to maximize the final pixel area of the stream.</p> |
| * <p>For example, if the crop region is set to a 4:3 aspect |
| * ratio, then 4:3 streams will use the exact crop |
| * region. 16:9 streams will further crop vertically |
| * (letterbox).</p> |
| * <p>Conversely, if the crop region is set to a 16:9, then 4:3 |
| * outputs will crop horizontally (pillarbox), and 16:9 |
| * streams will match exactly. These additional crops will |
| * be centered within the crop region.</p> |
| * <p>The width and height of the crop region cannot |
| * be set to be smaller than |
| * <code>floor( activeArraySize.width / {@link CameraCharacteristics#SCALER_AVAILABLE_MAX_DIGITAL_ZOOM android.scaler.availableMaxDigitalZoom} )</code> and |
| * <code>floor( activeArraySize.height / {@link CameraCharacteristics#SCALER_AVAILABLE_MAX_DIGITAL_ZOOM android.scaler.availableMaxDigitalZoom} )</code>, respectively.</p> |
| * <p>The camera device may adjust the crop region to account |
| * for rounding and other hardware requirements; the final |
| * crop region used will be included in the output capture |
| * result.</p> |
| * <p><b>Units</b>: Pixel coordinates relative to |
| * {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CameraCharacteristics#SCALER_AVAILABLE_MAX_DIGITAL_ZOOM |
| * @see CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE |
| */ |
| @PublicKey |
| public static final Key<android.graphics.Rect> SCALER_CROP_REGION = |
| new Key<android.graphics.Rect>("android.scaler.cropRegion", android.graphics.Rect.class); |
| |
| /** |
| * <p>Duration each pixel is exposed to |
| * light.</p> |
| * <p>If the sensor can't expose this exact duration, it will shorten the |
| * duration exposed to the nearest possible value (rather than expose longer). |
| * The final exposure time used will be available in the output capture result.</p> |
| * <p>This control is only effective if {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} or {@link CaptureRequest#CONTROL_MODE android.control.mode} is set to |
| * OFF; otherwise the auto-exposure algorithm will override this value.</p> |
| * <p><b>Units</b>: Nanoseconds</p> |
| * <p><b>Range of valid values:</b><br> |
| * {@link CameraCharacteristics#SENSOR_INFO_EXPOSURE_TIME_RANGE android.sensor.info.exposureTimeRange}</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CaptureRequest#CONTROL_AE_MODE |
| * @see CaptureRequest#CONTROL_MODE |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CameraCharacteristics#SENSOR_INFO_EXPOSURE_TIME_RANGE |
| */ |
| @PublicKey |
| public static final Key<Long> SENSOR_EXPOSURE_TIME = |
| new Key<Long>("android.sensor.exposureTime", long.class); |
| |
| /** |
| * <p>Duration from start of frame exposure to |
| * start of next frame exposure.</p> |
| * <p>The maximum frame rate that can be supported by a camera subsystem is |
| * a function of many factors:</p> |
| * <ul> |
| * <li>Requested resolutions of output image streams</li> |
| * <li>Availability of binning / skipping modes on the imager</li> |
| * <li>The bandwidth of the imager interface</li> |
| * <li>The bandwidth of the various ISP processing blocks</li> |
| * </ul> |
| * <p>Since these factors can vary greatly between different ISPs and |
| * sensors, the camera abstraction tries to represent the bandwidth |
| * restrictions with as simple a model as possible.</p> |
| * <p>The model presented has the following characteristics:</p> |
| * <ul> |
| * <li>The image sensor is always configured to output the smallest |
| * resolution possible given the application's requested output stream |
| * sizes. The smallest resolution is defined as being at least as large |
| * as the largest requested output stream size; the camera pipeline must |
| * never digitally upsample sensor data when the crop region covers the |
| * whole sensor. In general, this means that if only small output stream |
| * resolutions are configured, the sensor can provide a higher frame |
| * rate.</li> |
| * <li>Since any request may use any or all the currently configured |
| * output streams, the sensor and ISP must be configured to support |
| * scaling a single capture to all the streams at the same time. This |
| * means the camera pipeline must be ready to produce the largest |
| * requested output size without any delay. Therefore, the overall |
| * frame rate of a given configured stream set is governed only by the |
| * largest requested stream resolution.</li> |
| * <li>Using more than one output stream in a request does not affect the |
| * frame duration.</li> |
| * <li>Certain format-streams may need to do additional background processing |
| * before data is consumed/produced by that stream. These processors |
| * can run concurrently to the rest of the camera pipeline, but |
| * cannot process more than 1 capture at a time.</li> |
| * </ul> |
| * <p>The necessary information for the application, given the model above, |
| * is provided via the {@link CameraCharacteristics#SCALER_STREAM_CONFIGURATION_MAP android.scaler.streamConfigurationMap} field using |
| * {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputMinFrameDuration }. |
| * These are used to determine the maximum frame rate / minimum frame |
| * duration that is possible for a given stream configuration.</p> |
| * <p>Specifically, the application can use the following rules to |
| * determine the minimum frame duration it can request from the camera |
| * device:</p> |
| * <ol> |
| * <li>Let the set of currently configured input/output streams |
| * be called <code>S</code>.</li> |
| * <li>Find the minimum frame durations for each stream in <code>S</code>, by looking |
| * it up in {@link CameraCharacteristics#SCALER_STREAM_CONFIGURATION_MAP android.scaler.streamConfigurationMap} using {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputMinFrameDuration } |
| * (with its respective size/format). Let this set of frame durations be |
| * called <code>F</code>.</li> |
| * <li>For any given request <code>R</code>, the minimum frame duration allowed |
| * for <code>R</code> is the maximum out of all values in <code>F</code>. Let the streams |
| * used in <code>R</code> be called <code>S_r</code>.</li> |
| * </ol> |
| * <p>If none of the streams in <code>S_r</code> have a stall time (listed in {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputStallDuration } |
| * using its respective size/format), then the frame duration in <code>F</code> |
| * determines the steady state frame rate that the application will get |
| * if it uses <code>R</code> as a repeating request. Let this special kind of |
| * request be called <code>Rsimple</code>.</p> |
| * <p>A repeating request <code>Rsimple</code> can be <em>occasionally</em> interleaved |
| * by a single capture of a new request <code>Rstall</code> (which has at least |
| * one in-use stream with a non-0 stall time) and if <code>Rstall</code> has the |
| * same minimum frame duration this will not cause a frame rate loss |
| * if all buffers from the previous <code>Rstall</code> have already been |
| * delivered.</p> |
| * <p>For more details about stalling, see |
| * {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputStallDuration }.</p> |
| * <p>This control is only effective if {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} or {@link CaptureRequest#CONTROL_MODE android.control.mode} is set to |
| * OFF; otherwise the auto-exposure algorithm will override this value.</p> |
| * <p><b>Units</b>: Nanoseconds</p> |
| * <p><b>Range of valid values:</b><br> |
| * See {@link CameraCharacteristics#SENSOR_INFO_MAX_FRAME_DURATION android.sensor.info.maxFrameDuration}, |
| * {@link CameraCharacteristics#SCALER_STREAM_CONFIGURATION_MAP android.scaler.streamConfigurationMap}. The duration |
| * is capped to <code>max(duration, exposureTime + overhead)</code>.</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CaptureRequest#CONTROL_AE_MODE |
| * @see CaptureRequest#CONTROL_MODE |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CameraCharacteristics#SCALER_STREAM_CONFIGURATION_MAP |
| * @see CameraCharacteristics#SENSOR_INFO_MAX_FRAME_DURATION |
| */ |
| @PublicKey |
| public static final Key<Long> SENSOR_FRAME_DURATION = |
| new Key<Long>("android.sensor.frameDuration", long.class); |
| |
| /** |
| * <p>The amount of gain applied to sensor data |
| * before processing.</p> |
| * <p>The sensitivity is the standard ISO sensitivity value, |
| * as defined in ISO 12232:2006.</p> |
| * <p>The sensitivity must be within {@link CameraCharacteristics#SENSOR_INFO_SENSITIVITY_RANGE android.sensor.info.sensitivityRange}, and |
| * if if it less than {@link CameraCharacteristics#SENSOR_MAX_ANALOG_SENSITIVITY android.sensor.maxAnalogSensitivity}, the camera device |
| * is guaranteed to use only analog amplification for applying the gain.</p> |
| * <p>If the camera device cannot apply the exact sensitivity |
| * requested, it will reduce the gain to the nearest supported |
| * value. The final sensitivity used will be available in the |
| * output capture result.</p> |
| * <p><b>Units</b>: ISO arithmetic units</p> |
| * <p><b>Range of valid values:</b><br> |
| * {@link CameraCharacteristics#SENSOR_INFO_SENSITIVITY_RANGE android.sensor.info.sensitivityRange}</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CameraCharacteristics#SENSOR_INFO_SENSITIVITY_RANGE |
| * @see CameraCharacteristics#SENSOR_MAX_ANALOG_SENSITIVITY |
| */ |
| @PublicKey |
| public static final Key<Integer> SENSOR_SENSITIVITY = |
| new Key<Integer>("android.sensor.sensitivity", int.class); |
| |
| /** |
| * <p>Time at start of exposure of first |
| * row of the image sensor active array, in nanoseconds.</p> |
| * <p>The timestamps are also included in all image |
| * buffers produced for the same capture, and will be identical |
| * on all the outputs.</p> |
| * <p>When {@link CameraCharacteristics#SENSOR_INFO_TIMESTAMP_SOURCE android.sensor.info.timestampSource} <code>==</code> UNKNOWN, |
| * the timestamps measure time since an unspecified starting point, |
| * and are monotonically increasing. They can be compared with the |
| * timestamps for other captures from the same camera device, but are |
| * not guaranteed to be comparable to any other time source.</p> |
| * <p>When {@link CameraCharacteristics#SENSOR_INFO_TIMESTAMP_SOURCE android.sensor.info.timestampSource} <code>==</code> REALTIME, the |
| * timestamps measure time in the same timebase as {@link android.os.SystemClock#elapsedRealtimeNanos }, and they can |
| * be compared to other timestamps from other subsystems that |
| * are using that base.</p> |
| * <p>For reprocessing, the timestamp will match the start of exposure of |
| * the input image, i.e. {@link CaptureResult#SENSOR_TIMESTAMP the |
| * timestamp} in the TotalCaptureResult that was used to create the |
| * reprocess capture request.</p> |
| * <p><b>Units</b>: Nanoseconds</p> |
| * <p><b>Range of valid values:</b><br> |
| * > 0</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CameraCharacteristics#SENSOR_INFO_TIMESTAMP_SOURCE |
| */ |
| @PublicKey |
| public static final Key<Long> SENSOR_TIMESTAMP = |
| new Key<Long>("android.sensor.timestamp", long.class); |
| |
| /** |
| * <p>The estimated camera neutral color in the native sensor colorspace at |
| * the time of capture.</p> |
| * <p>This value gives the neutral color point encoded as an RGB value in the |
| * native sensor color space. The neutral color point indicates the |
| * currently estimated white point of the scene illumination. It can be |
| * used to interpolate between the provided color transforms when |
| * processing raw sensor data.</p> |
| * <p>The order of the values is R, G, B; where R is in the lowest index.</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| */ |
| @PublicKey |
| public static final Key<Rational[]> SENSOR_NEUTRAL_COLOR_POINT = |
| new Key<Rational[]>("android.sensor.neutralColorPoint", Rational[].class); |
| |
| /** |
| * <p>Noise model coefficients for each CFA mosaic channel.</p> |
| * <p>This key contains two noise model coefficients for each CFA channel |
| * corresponding to the sensor amplification (S) and sensor readout |
| * noise (O). These are given as pairs of coefficients for each channel |
| * in the same order as channels listed for the CFA layout key |
| * (see {@link CameraCharacteristics#SENSOR_INFO_COLOR_FILTER_ARRANGEMENT android.sensor.info.colorFilterArrangement}). This is |
| * represented as an array of Pair<Double, Double>, where |
| * the first member of the Pair at index n is the S coefficient and the |
| * second member is the O coefficient for the nth color channel in the CFA.</p> |
| * <p>These coefficients are used in a two parameter noise model to describe |
| * the amount of noise present in the image for each CFA channel. The |
| * noise model used here is:</p> |
| * <p>N(x) = sqrt(Sx + O)</p> |
| * <p>Where x represents the recorded signal of a CFA channel normalized to |
| * the range [0, 1], and S and O are the noise model coeffiecients for |
| * that channel.</p> |
| * <p>A more detailed description of the noise model can be found in the |
| * Adobe DNG specification for the NoiseProfile tag.</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * |
| * @see CameraCharacteristics#SENSOR_INFO_COLOR_FILTER_ARRANGEMENT |
| */ |
| @PublicKey |
| public static final Key<android.util.Pair<Double,Double>[]> SENSOR_NOISE_PROFILE = |
| new Key<android.util.Pair<Double,Double>[]>("android.sensor.noiseProfile", new TypeReference<android.util.Pair<Double,Double>[]>() {{ }}); |
| |
| /** |
| * <p>The worst-case divergence between Bayer green channels.</p> |
| * <p>This value is an estimate of the worst case split between the |
| * Bayer green channels in the red and blue rows in the sensor color |
| * filter array.</p> |
| * <p>The green split is calculated as follows:</p> |
| * <ol> |
| * <li>A 5x5 pixel (or larger) window W within the active sensor array is |
| * chosen. The term 'pixel' here is taken to mean a group of 4 Bayer |
| * mosaic channels (R, Gr, Gb, B). The location and size of the window |
| * chosen is implementation defined, and should be chosen to provide a |
| * green split estimate that is both representative of the entire image |
| * for this camera sensor, and can be calculated quickly.</li> |
| * <li>The arithmetic mean of the green channels from the red |
| * rows (mean_Gr) within W is computed.</li> |
| * <li>The arithmetic mean of the green channels from the blue |
| * rows (mean_Gb) within W is computed.</li> |
| * <li>The maximum ratio R of the two means is computed as follows: |
| * <code>R = max((mean_Gr + 1)/(mean_Gb + 1), (mean_Gb + 1)/(mean_Gr + 1))</code></li> |
| * </ol> |
| * <p>The ratio R is the green split divergence reported for this property, |
| * which represents how much the green channels differ in the mosaic |
| * pattern. This value is typically used to determine the treatment of |
| * the green mosaic channels when demosaicing.</p> |
| * <p>The green split value can be roughly interpreted as follows:</p> |
| * <ul> |
| * <li>R < 1.03 is a negligible split (<3% divergence).</li> |
| * <li>1.20 <= R >= 1.03 will require some software |
| * correction to avoid demosaic errors (3-20% divergence).</li> |
| * <li>R > 1.20 will require strong software correction to produce |
| * a usuable image (>20% divergence).</li> |
| * </ul> |
| * <p><b>Range of valid values:</b><br></p> |
| * <p>>= 0</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| */ |
| @PublicKey |
| public static final Key<Float> SENSOR_GREEN_SPLIT = |
| new Key<Float>("android.sensor.greenSplit", float.class); |
| |
| /** |
| * <p>A pixel <code>[R, G_even, G_odd, B]</code> that supplies the test pattern |
| * when {@link CaptureRequest#SENSOR_TEST_PATTERN_MODE android.sensor.testPatternMode} is SOLID_COLOR.</p> |
| * <p>Each color channel is treated as an unsigned 32-bit integer. |
| * The camera device then uses the most significant X bits |
| * that correspond to how many bits are in its Bayer raw sensor |
| * output.</p> |
| * <p>For example, a sensor with RAW10 Bayer output would use the |
| * 10 most significant bits from each color channel.</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * |
| * @see CaptureRequest#SENSOR_TEST_PATTERN_MODE |
| */ |
| @PublicKey |
| public static final Key<int[]> SENSOR_TEST_PATTERN_DATA = |
| new Key<int[]>("android.sensor.testPatternData", int[].class); |
| |
| /** |
| * <p>When enabled, the sensor sends a test pattern instead of |
| * doing a real exposure from the camera.</p> |
| * <p>When a test pattern is enabled, all manual sensor controls specified |
| * by android.sensor.* will be ignored. All other controls should |
| * work as normal.</p> |
| * <p>For example, if manual flash is enabled, flash firing should still |
| * occur (and that the test pattern remain unmodified, since the flash |
| * would not actually affect it).</p> |
| * <p>Defaults to OFF.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #SENSOR_TEST_PATTERN_MODE_OFF OFF}</li> |
| * <li>{@link #SENSOR_TEST_PATTERN_MODE_SOLID_COLOR SOLID_COLOR}</li> |
| * <li>{@link #SENSOR_TEST_PATTERN_MODE_COLOR_BARS COLOR_BARS}</li> |
| * <li>{@link #SENSOR_TEST_PATTERN_MODE_COLOR_BARS_FADE_TO_GRAY COLOR_BARS_FADE_TO_GRAY}</li> |
| * <li>{@link #SENSOR_TEST_PATTERN_MODE_PN9 PN9}</li> |
| * <li>{@link #SENSOR_TEST_PATTERN_MODE_CUSTOM1 CUSTOM1}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br> |
| * {@link CameraCharacteristics#SENSOR_AVAILABLE_TEST_PATTERN_MODES android.sensor.availableTestPatternModes}</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * |
| * @see CameraCharacteristics#SENSOR_AVAILABLE_TEST_PATTERN_MODES |
| * @see #SENSOR_TEST_PATTERN_MODE_OFF |
| * @see #SENSOR_TEST_PATTERN_MODE_SOLID_COLOR |
| * @see #SENSOR_TEST_PATTERN_MODE_COLOR_BARS |
| * @see #SENSOR_TEST_PATTERN_MODE_COLOR_BARS_FADE_TO_GRAY |
| * @see #SENSOR_TEST_PATTERN_MODE_PN9 |
| * @see #SENSOR_TEST_PATTERN_MODE_CUSTOM1 |
| */ |
| @PublicKey |
| public static final Key<Integer> SENSOR_TEST_PATTERN_MODE = |
| new Key<Integer>("android.sensor.testPatternMode", int.class); |
| |
| /** |
| * <p>Duration between the start of first row exposure |
| * and the start of last row exposure.</p> |
| * <p>This is the exposure time skew between the first and last |
| * row exposure start times. The first row and the last row are |
| * the first and last rows inside of the |
| * {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}.</p> |
| * <p>For typical camera sensors that use rolling shutters, this is also equivalent |
| * to the frame readout time.</p> |
| * <p><b>Units</b>: Nanoseconds</p> |
| * <p><b>Range of valid values:</b><br> |
| * >= 0 and < |
| * {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputMinFrameDuration }.</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Limited capability</b> - |
| * Present on all camera devices that report being at least {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED HARDWARE_LEVEL_LIMITED} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE |
| */ |
| @PublicKey |
| public static final Key<Long> SENSOR_ROLLING_SHUTTER_SKEW = |
| new Key<Long>("android.sensor.rollingShutterSkew", long.class); |
| |
| /** |
| * <p>Quality of lens shading correction applied |
| * to the image data.</p> |
| * <p>When set to OFF mode, no lens shading correction will be applied by the |
| * camera device, and an identity lens shading map data will be provided |
| * if <code>{@link CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE android.statistics.lensShadingMapMode} == ON</code>. For example, for lens |
| * shading map with size of <code>[ 4, 3 ]</code>, |
| * the output {@link CaptureResult#STATISTICS_LENS_SHADING_CORRECTION_MAP android.statistics.lensShadingCorrectionMap} for this case will be an identity |
| * map shown below:</p> |
| * <pre><code>[ 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, |
| * 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, |
| * 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, |
| * 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, |
| * 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, |
| * 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 ] |
| * </code></pre> |
| * <p>When set to other modes, lens shading correction will be applied by the camera |
| * device. Applications can request lens shading map data by setting |
| * {@link CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE android.statistics.lensShadingMapMode} to ON, and then the camera device will provide lens |
| * shading map data in {@link CaptureResult#STATISTICS_LENS_SHADING_CORRECTION_MAP android.statistics.lensShadingCorrectionMap}; the returned shading map |
| * data will be the one applied by the camera device for this capture request.</p> |
| * <p>The shading map data may depend on the auto-exposure (AE) and AWB statistics, therefore |
| * the reliability of the map data may be affected by the AE and AWB algorithms. When AE and |
| * AWB are in AUTO modes({@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} <code>!=</code> OFF and {@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode} <code>!=</code> |
| * OFF), to get best results, it is recommended that the applications wait for the AE and AWB |
| * to be converged before using the returned shading map data.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #SHADING_MODE_OFF OFF}</li> |
| * <li>{@link #SHADING_MODE_FAST FAST}</li> |
| * <li>{@link #SHADING_MODE_HIGH_QUALITY HIGH_QUALITY}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br> |
| * {@link CameraCharacteristics#SHADING_AVAILABLE_MODES android.shading.availableModes}</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CaptureRequest#CONTROL_AE_MODE |
| * @see CaptureRequest#CONTROL_AWB_MODE |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CameraCharacteristics#SHADING_AVAILABLE_MODES |
| * @see CaptureResult#STATISTICS_LENS_SHADING_CORRECTION_MAP |
| * @see CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE |
| * @see #SHADING_MODE_OFF |
| * @see #SHADING_MODE_FAST |
| * @see #SHADING_MODE_HIGH_QUALITY |
| */ |
| @PublicKey |
| public static final Key<Integer> SHADING_MODE = |
| new Key<Integer>("android.shading.mode", int.class); |
| |
| /** |
| * <p>Operating mode for the face detector |
| * unit.</p> |
| * <p>Whether face detection is enabled, and whether it |
| * should output just the basic fields or the full set of |
| * fields.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #STATISTICS_FACE_DETECT_MODE_OFF OFF}</li> |
| * <li>{@link #STATISTICS_FACE_DETECT_MODE_SIMPLE SIMPLE}</li> |
| * <li>{@link #STATISTICS_FACE_DETECT_MODE_FULL FULL}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br> |
| * {@link CameraCharacteristics#STATISTICS_INFO_AVAILABLE_FACE_DETECT_MODES android.statistics.info.availableFaceDetectModes}</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CameraCharacteristics#STATISTICS_INFO_AVAILABLE_FACE_DETECT_MODES |
| * @see #STATISTICS_FACE_DETECT_MODE_OFF |
| * @see #STATISTICS_FACE_DETECT_MODE_SIMPLE |
| * @see #STATISTICS_FACE_DETECT_MODE_FULL |
| */ |
| @PublicKey |
| public static final Key<Integer> STATISTICS_FACE_DETECT_MODE = |
| new Key<Integer>("android.statistics.faceDetectMode", int.class); |
| |
| /** |
| * <p>List of unique IDs for detected faces.</p> |
| * <p>Each detected face is given a unique ID that is valid for as long as the face is visible |
| * to the camera device. A face that leaves the field of view and later returns may be |
| * assigned a new ID.</p> |
| * <p>Only available if {@link CaptureRequest#STATISTICS_FACE_DETECT_MODE android.statistics.faceDetectMode} == FULL |
| * This key is available on all devices.</p> |
| * |
| * @see CaptureRequest#STATISTICS_FACE_DETECT_MODE |
| * @hide |
| */ |
| public static final Key<int[]> STATISTICS_FACE_IDS = |
| new Key<int[]>("android.statistics.faceIds", int[].class); |
| |
| /** |
| * <p>List of landmarks for detected |
| * faces.</p> |
| * <p>The coordinate system is that of {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}, with |
| * <code>(0, 0)</code> being the top-left pixel of the active array.</p> |
| * <p>Only available if {@link CaptureRequest#STATISTICS_FACE_DETECT_MODE android.statistics.faceDetectMode} == FULL |
| * This key is available on all devices.</p> |
| * |
| * @see CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE |
| * @see CaptureRequest#STATISTICS_FACE_DETECT_MODE |
| * @hide |
| */ |
| public static final Key<int[]> STATISTICS_FACE_LANDMARKS = |
| new Key<int[]>("android.statistics.faceLandmarks", int[].class); |
| |
| /** |
| * <p>List of the bounding rectangles for detected |
| * faces.</p> |
| * <p>The coordinate system is that of {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}, with |
| * <code>(0, 0)</code> being the top-left pixel of the active array.</p> |
| * <p>Only available if {@link CaptureRequest#STATISTICS_FACE_DETECT_MODE android.statistics.faceDetectMode} != OFF |
| * This key is available on all devices.</p> |
| * |
| * @see CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE |
| * @see CaptureRequest#STATISTICS_FACE_DETECT_MODE |
| * @hide |
| */ |
| public static final Key<android.graphics.Rect[]> STATISTICS_FACE_RECTANGLES = |
| new Key<android.graphics.Rect[]>("android.statistics.faceRectangles", android.graphics.Rect[].class); |
| |
| /** |
| * <p>List of the face confidence scores for |
| * detected faces</p> |
| * <p>Only available if {@link CaptureRequest#STATISTICS_FACE_DETECT_MODE android.statistics.faceDetectMode} != OFF.</p> |
| * <p><b>Range of valid values:</b><br> |
| * 1-100</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CaptureRequest#STATISTICS_FACE_DETECT_MODE |
| * @hide |
| */ |
| public static final Key<byte[]> STATISTICS_FACE_SCORES = |
| new Key<byte[]>("android.statistics.faceScores", byte[].class); |
| |
| /** |
| * <p>List of the faces detected through camera face detection |
| * in this capture.</p> |
| * <p>Only available if {@link CaptureRequest#STATISTICS_FACE_DETECT_MODE android.statistics.faceDetectMode} <code>!=</code> OFF.</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CaptureRequest#STATISTICS_FACE_DETECT_MODE |
| */ |
| @PublicKey |
| @SyntheticKey |
| public static final Key<android.hardware.camera2.params.Face[]> STATISTICS_FACES = |
| new Key<android.hardware.camera2.params.Face[]>("android.statistics.faces", android.hardware.camera2.params.Face[].class); |
| |
| /** |
| * <p>The shading map is a low-resolution floating-point map |
| * that lists the coefficients used to correct for vignetting, for each |
| * Bayer color channel.</p> |
| * <p>The least shaded section of the image should have a gain factor |
| * of 1; all other sections should have gains above 1.</p> |
| * <p>When {@link CaptureRequest#COLOR_CORRECTION_MODE android.colorCorrection.mode} = TRANSFORM_MATRIX, the map |
| * must take into account the colorCorrection settings.</p> |
| * <p>The shading map is for the entire active pixel array, and is not |
| * affected by the crop region specified in the request. Each shading map |
| * entry is the value of the shading compensation map over a specific |
| * pixel on the sensor. Specifically, with a (N x M) resolution shading |
| * map, and an active pixel array size (W x H), shading map entry |
| * (x,y) ϵ (0 ... N-1, 0 ... M-1) is the value of the shading map at |
| * pixel ( ((W-1)/(N-1)) * x, ((H-1)/(M-1)) * y) for the four color channels. |
| * The map is assumed to be bilinearly interpolated between the sample points.</p> |
| * <p>The channel order is [R, Geven, Godd, B], where Geven is the green |
| * channel for the even rows of a Bayer pattern, and Godd is the odd rows. |
| * The shading map is stored in a fully interleaved format.</p> |
| * <p>The shading map should have on the order of 30-40 rows and columns, |
| * and must be smaller than 64x64.</p> |
| * <p>As an example, given a very small map defined as:</p> |
| * <pre><code>width,height = [ 4, 3 ] |
| * values = |
| * [ 1.3, 1.2, 1.15, 1.2, 1.2, 1.2, 1.15, 1.2, |
| * 1.1, 1.2, 1.2, 1.2, 1.3, 1.2, 1.3, 1.3, |
| * 1.2, 1.2, 1.25, 1.1, 1.1, 1.1, 1.1, 1.0, |
| * 1.0, 1.0, 1.0, 1.0, 1.2, 1.3, 1.25, 1.2, |
| * 1.3, 1.2, 1.2, 1.3, 1.2, 1.15, 1.1, 1.2, |
| * 1.2, 1.1, 1.0, 1.2, 1.3, 1.15, 1.2, 1.3 ] |
| * </code></pre> |
| * <p>The low-resolution scaling map images for each channel are |
| * (displayed using nearest-neighbor interpolation):</p> |
| * <p><img alt="Red lens shading map" src="../../../../images/camera2/metadata/android.statistics.lensShadingMap/red_shading.png" /> |
| * <img alt="Green (even rows) lens shading map" src="../../../../images/camera2/metadata/android.statistics.lensShadingMap/green_e_shading.png" /> |
| * <img alt="Green (odd rows) lens shading map" src="../../../../images/camera2/metadata/android.statistics.lensShadingMap/green_o_shading.png" /> |
| * <img alt="Blue lens shading map" src="../../../../images/camera2/metadata/android.statistics.lensShadingMap/blue_shading.png" /></p> |
| * <p>As a visualization only, inverting the full-color map to recover an |
| * image of a gray wall (using bicubic interpolation for visual quality) as captured by the sensor gives:</p> |
| * <p><img alt="Image of a uniform white wall (inverse shading map)" src="../../../../images/camera2/metadata/android.statistics.lensShadingMap/inv_shading.png" /></p> |
| * <p><b>Range of valid values:</b><br> |
| * Each gain factor is >= 1</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CaptureRequest#COLOR_CORRECTION_MODE |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| */ |
| @PublicKey |
| public static final Key<android.hardware.camera2.params.LensShadingMap> STATISTICS_LENS_SHADING_CORRECTION_MAP = |
| new Key<android.hardware.camera2.params.LensShadingMap>("android.statistics.lensShadingCorrectionMap", android.hardware.camera2.params.LensShadingMap.class); |
| |
| /** |
| * <p>The shading map is a low-resolution floating-point map |
| * that lists the coefficients used to correct for vignetting, for each |
| * Bayer color channel of RAW image data.</p> |
| * <p>The least shaded section of the image should have a gain factor |
| * of 1; all other sections should have gains above 1.</p> |
| * <p>When {@link CaptureRequest#COLOR_CORRECTION_MODE android.colorCorrection.mode} = TRANSFORM_MATRIX, the map |
| * must take into account the colorCorrection settings.</p> |
| * <p>The shading map is for the entire active pixel array, and is not |
| * affected by the crop region specified in the request. Each shading map |
| * entry is the value of the shading compensation map over a specific |
| * pixel on the sensor. Specifically, with a (N x M) resolution shading |
| * map, and an active pixel array size (W x H), shading map entry |
| * (x,y) ϵ (0 ... N-1, 0 ... M-1) is the value of the shading map at |
| * pixel ( ((W-1)/(N-1)) * x, ((H-1)/(M-1)) * y) for the four color channels. |
| * The map is assumed to be bilinearly interpolated between the sample points.</p> |
| * <p>The channel order is [R, Geven, Godd, B], where Geven is the green |
| * channel for the even rows of a Bayer pattern, and Godd is the odd rows. |
| * The shading map is stored in a fully interleaved format, and its size |
| * is provided in the camera static metadata by android.lens.info.shadingMapSize.</p> |
| * <p>The shading map should have on the order of 30-40 rows and columns, |
| * and must be smaller than 64x64.</p> |
| * <p>As an example, given a very small map defined as:</p> |
| * <pre><code>android.lens.info.shadingMapSize = [ 4, 3 ] |
| * android.statistics.lensShadingMap = |
| * [ 1.3, 1.2, 1.15, 1.2, 1.2, 1.2, 1.15, 1.2, |
| * 1.1, 1.2, 1.2, 1.2, 1.3, 1.2, 1.3, 1.3, |
| * 1.2, 1.2, 1.25, 1.1, 1.1, 1.1, 1.1, 1.0, |
| * 1.0, 1.0, 1.0, 1.0, 1.2, 1.3, 1.25, 1.2, |
| * 1.3, 1.2, 1.2, 1.3, 1.2, 1.15, 1.1, 1.2, |
| * 1.2, 1.1, 1.0, 1.2, 1.3, 1.15, 1.2, 1.3 ] |
| * </code></pre> |
| * <p>The low-resolution scaling map images for each channel are |
| * (displayed using nearest-neighbor interpolation):</p> |
| * <p><img alt="Red lens shading map" src="../../../../images/camera2/metadata/android.statistics.lensShadingMap/red_shading.png" /> |
| * <img alt="Green (even rows) lens shading map" src="../../../../images/camera2/metadata/android.statistics.lensShadingMap/green_e_shading.png" /> |
| * <img alt="Green (odd rows) lens shading map" src="../../../../images/camera2/metadata/android.statistics.lensShadingMap/green_o_shading.png" /> |
| * <img alt="Blue lens shading map" src="../../../../images/camera2/metadata/android.statistics.lensShadingMap/blue_shading.png" /></p> |
| * <p>As a visualization only, inverting the full-color map to recover an |
| * image of a gray wall (using bicubic interpolation for visual quality) |
| * as captured by the sensor gives:</p> |
| * <p><img alt="Image of a uniform white wall (inverse shading map)" src="../../../../images/camera2/metadata/android.statistics.lensShadingMap/inv_shading.png" /></p> |
| * <p>Note that the RAW image data might be subject to lens shading |
| * correction not reported on this map. Query |
| * {@link CameraCharacteristics#SENSOR_INFO_LENS_SHADING_APPLIED android.sensor.info.lensShadingApplied} to see if RAW image data has subject |
| * to lens shading correction. If {@link CameraCharacteristics#SENSOR_INFO_LENS_SHADING_APPLIED android.sensor.info.lensShadingApplied} |
| * is TRUE, the RAW image data is subject to partial or full lens shading |
| * correction. In the case full lens shading correction is applied to RAW |
| * images, the gain factor map reported in this key will contain all 1.0 gains. |
| * In other words, the map reported in this key is the remaining lens shading |
| * that needs to be applied on the RAW image to get images without lens shading |
| * artifacts. See {@link CameraCharacteristics#REQUEST_MAX_NUM_OUTPUT_RAW android.request.maxNumOutputRaw} for a list of RAW image |
| * formats.</p> |
| * <p><b>Range of valid values:</b><br> |
| * Each gain factor is >= 1</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CaptureRequest#COLOR_CORRECTION_MODE |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CameraCharacteristics#REQUEST_MAX_NUM_OUTPUT_RAW |
| * @see CameraCharacteristics#SENSOR_INFO_LENS_SHADING_APPLIED |
| * @hide |
| */ |
| public static final Key<float[]> STATISTICS_LENS_SHADING_MAP = |
| new Key<float[]>("android.statistics.lensShadingMap", float[].class); |
| |
| /** |
| * <p>The best-fit color channel gains calculated |
| * by the camera device's statistics units for the current output frame.</p> |
| * <p>This may be different than the gains used for this frame, |
| * since statistics processing on data from a new frame |
| * typically completes after the transform has already been |
| * applied to that frame.</p> |
| * <p>The 4 channel gains are defined in Bayer domain, |
| * see {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} for details.</p> |
| * <p>This value should always be calculated by the auto-white balance (AWB) block, |
| * regardless of the android.control.* current values.</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * |
| * @see CaptureRequest#COLOR_CORRECTION_GAINS |
| * @deprecated |
| * @hide |
| */ |
| @Deprecated |
| public static final Key<float[]> STATISTICS_PREDICTED_COLOR_GAINS = |
| new Key<float[]>("android.statistics.predictedColorGains", float[].class); |
| |
| /** |
| * <p>The best-fit color transform matrix estimate |
| * calculated by the camera device's statistics units for the current |
| * output frame.</p> |
| * <p>The camera device will provide the estimate from its |
| * statistics unit on the white balance transforms to use |
| * for the next frame. These are the values the camera device believes |
| * are the best fit for the current output frame. This may |
| * be different than the transform used for this frame, since |
| * statistics processing on data from a new frame typically |
| * completes after the transform has already been applied to |
| * that frame.</p> |
| * <p>These estimates must be provided for all frames, even if |
| * capture settings and color transforms are set by the application.</p> |
| * <p>This value should always be calculated by the auto-white balance (AWB) block, |
| * regardless of the android.control.* current values.</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * @deprecated |
| * @hide |
| */ |
| @Deprecated |
| public static final Key<Rational[]> STATISTICS_PREDICTED_COLOR_TRANSFORM = |
| new Key<Rational[]>("android.statistics.predictedColorTransform", Rational[].class); |
| |
| /** |
| * <p>The camera device estimated scene illumination lighting |
| * frequency.</p> |
| * <p>Many light sources, such as most fluorescent lights, flicker at a rate |
| * that depends on the local utility power standards. This flicker must be |
| * accounted for by auto-exposure routines to avoid artifacts in captured images. |
| * The camera device uses this entry to tell the application what the scene |
| * illuminant frequency is.</p> |
| * <p>When manual exposure control is enabled |
| * (<code>{@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} == OFF</code> or <code>{@link CaptureRequest#CONTROL_MODE android.control.mode} == |
| * OFF</code>), the {@link CaptureRequest#CONTROL_AE_ANTIBANDING_MODE android.control.aeAntibandingMode} doesn't perform |
| * antibanding, and the application can ensure it selects |
| * exposure times that do not cause banding issues by looking |
| * into this metadata field. See |
| * {@link CaptureRequest#CONTROL_AE_ANTIBANDING_MODE android.control.aeAntibandingMode} for more details.</p> |
| * <p>Reports NONE if there doesn't appear to be flickering illumination.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #STATISTICS_SCENE_FLICKER_NONE NONE}</li> |
| * <li>{@link #STATISTICS_SCENE_FLICKER_50HZ 50HZ}</li> |
| * <li>{@link #STATISTICS_SCENE_FLICKER_60HZ 60HZ}</li> |
| * </ul></p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CaptureRequest#CONTROL_AE_ANTIBANDING_MODE |
| * @see CaptureRequest#CONTROL_AE_MODE |
| * @see CaptureRequest#CONTROL_MODE |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see #STATISTICS_SCENE_FLICKER_NONE |
| * @see #STATISTICS_SCENE_FLICKER_50HZ |
| * @see #STATISTICS_SCENE_FLICKER_60HZ |
| */ |
| @PublicKey |
| public static final Key<Integer> STATISTICS_SCENE_FLICKER = |
| new Key<Integer>("android.statistics.sceneFlicker", int.class); |
| |
| /** |
| * <p>Operating mode for hot pixel map generation.</p> |
| * <p>If set to <code>true</code>, a hot pixel map is returned in {@link CaptureResult#STATISTICS_HOT_PIXEL_MAP android.statistics.hotPixelMap}. |
| * If set to <code>false</code>, no hot pixel map will be returned.</p> |
| * <p><b>Range of valid values:</b><br> |
| * {@link CameraCharacteristics#STATISTICS_INFO_AVAILABLE_HOT_PIXEL_MAP_MODES android.statistics.info.availableHotPixelMapModes}</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * |
| * @see CaptureResult#STATISTICS_HOT_PIXEL_MAP |
| * @see CameraCharacteristics#STATISTICS_INFO_AVAILABLE_HOT_PIXEL_MAP_MODES |
| */ |
| @PublicKey |
| public static final Key<Boolean> STATISTICS_HOT_PIXEL_MAP_MODE = |
| new Key<Boolean>("android.statistics.hotPixelMapMode", boolean.class); |
| |
| /** |
| * <p>List of <code>(x, y)</code> coordinates of hot/defective pixels on the sensor.</p> |
| * <p>A coordinate <code>(x, y)</code> must lie between <code>(0, 0)</code>, and |
| * <code>(width - 1, height - 1)</code> (inclusive), which are the top-left and |
| * bottom-right of the pixel array, respectively. The width and |
| * height dimensions are given in {@link CameraCharacteristics#SENSOR_INFO_PIXEL_ARRAY_SIZE android.sensor.info.pixelArraySize}. |
| * This may include hot pixels that lie outside of the active array |
| * bounds given by {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}.</p> |
| * <p><b>Range of valid values:</b><br></p> |
| * <p>n <= number of pixels on the sensor. |
| * The <code>(x, y)</code> coordinates must be bounded by |
| * {@link CameraCharacteristics#SENSOR_INFO_PIXEL_ARRAY_SIZE android.sensor.info.pixelArraySize}.</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * |
| * @see CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE |
| * @see CameraCharacteristics#SENSOR_INFO_PIXEL_ARRAY_SIZE |
| */ |
| @PublicKey |
| public static final Key<android.graphics.Point[]> STATISTICS_HOT_PIXEL_MAP = |
| new Key<android.graphics.Point[]>("android.statistics.hotPixelMap", android.graphics.Point[].class); |
| |
| /** |
| * <p>Whether the camera device will output the lens |
| * shading map in output result metadata.</p> |
| * <p>When set to ON, |
| * android.statistics.lensShadingMap will be provided in |
| * the output result metadata.</p> |
| * <p>ON is always supported on devices with the RAW capability.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #STATISTICS_LENS_SHADING_MAP_MODE_OFF OFF}</li> |
| * <li>{@link #STATISTICS_LENS_SHADING_MAP_MODE_ON ON}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br> |
| * {@link CameraCharacteristics#STATISTICS_INFO_AVAILABLE_LENS_SHADING_MAP_MODES android.statistics.info.availableLensShadingMapModes}</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CameraCharacteristics#STATISTICS_INFO_AVAILABLE_LENS_SHADING_MAP_MODES |
| * @see #STATISTICS_LENS_SHADING_MAP_MODE_OFF |
| * @see #STATISTICS_LENS_SHADING_MAP_MODE_ON |
| */ |
| @PublicKey |
| public static final Key<Integer> STATISTICS_LENS_SHADING_MAP_MODE = |
| new Key<Integer>("android.statistics.lensShadingMapMode", int.class); |
| |
| /** |
| * <p>Tonemapping / contrast / gamma curve for the blue |
| * channel, to use when {@link CaptureRequest#TONEMAP_MODE android.tonemap.mode} is |
| * CONTRAST_CURVE.</p> |
| * <p>See android.tonemap.curveRed for more details.</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CaptureRequest#TONEMAP_MODE |
| * @hide |
| */ |
| public static final Key<float[]> TONEMAP_CURVE_BLUE = |
| new Key<float[]>("android.tonemap.curveBlue", float[].class); |
| |
| /** |
| * <p>Tonemapping / contrast / gamma curve for the green |
| * channel, to use when {@link CaptureRequest#TONEMAP_MODE android.tonemap.mode} is |
| * CONTRAST_CURVE.</p> |
| * <p>See android.tonemap.curveRed for more details.</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CaptureRequest#TONEMAP_MODE |
| * @hide |
| */ |
| public static final Key<float[]> TONEMAP_CURVE_GREEN = |
| new Key<float[]>("android.tonemap.curveGreen", float[].class); |
| |
| /** |
| * <p>Tonemapping / contrast / gamma curve for the red |
| * channel, to use when {@link CaptureRequest#TONEMAP_MODE android.tonemap.mode} is |
| * CONTRAST_CURVE.</p> |
| * <p>Each channel's curve is defined by an array of control points:</p> |
| * <pre><code>android.tonemap.curveRed = |
| * [ P0in, P0out, P1in, P1out, P2in, P2out, P3in, P3out, ..., PNin, PNout ] |
| * 2 <= N <= {@link CameraCharacteristics#TONEMAP_MAX_CURVE_POINTS android.tonemap.maxCurvePoints}</code></pre> |
| * <p>These are sorted in order of increasing <code>Pin</code>; it is |
| * required that input values 0.0 and 1.0 are included in the list to |
| * define a complete mapping. For input values between control points, |
| * the camera device must linearly interpolate between the control |
| * points.</p> |
| * <p>Each curve can have an independent number of points, and the number |
| * of points can be less than max (that is, the request doesn't have to |
| * always provide a curve with number of points equivalent to |
| * {@link CameraCharacteristics#TONEMAP_MAX_CURVE_POINTS android.tonemap.maxCurvePoints}).</p> |
| * <p>A few examples, and their corresponding graphical mappings; these |
| * only specify the red channel and the precision is limited to 4 |
| * digits, for conciseness.</p> |
| * <p>Linear mapping:</p> |
| * <pre><code>android.tonemap.curveRed = [ 0, 0, 1.0, 1.0 ] |
| * </code></pre> |
| * <p><img alt="Linear mapping curve" src="../../../../images/camera2/metadata/android.tonemap.curveRed/linear_tonemap.png" /></p> |
| * <p>Invert mapping:</p> |
| * <pre><code>android.tonemap.curveRed = [ 0, 1.0, 1.0, 0 ] |
| * </code></pre> |
| * <p><img alt="Inverting mapping curve" src="../../../../images/camera2/metadata/android.tonemap.curveRed/inverse_tonemap.png" /></p> |
| * <p>Gamma 1/2.2 mapping, with 16 control points:</p> |
| * <pre><code>android.tonemap.curveRed = [ |
| * 0.0000, 0.0000, 0.0667, 0.2920, 0.1333, 0.4002, 0.2000, 0.4812, |
| * 0.2667, 0.5484, 0.3333, 0.6069, 0.4000, 0.6594, 0.4667, 0.7072, |
| * 0.5333, 0.7515, 0.6000, 0.7928, 0.6667, 0.8317, 0.7333, 0.8685, |
| * 0.8000, 0.9035, 0.8667, 0.9370, 0.9333, 0.9691, 1.0000, 1.0000 ] |
| * </code></pre> |
| * <p><img alt="Gamma = 1/2.2 tonemapping curve" src="../../../../images/camera2/metadata/android.tonemap.curveRed/gamma_tonemap.png" /></p> |
| * <p>Standard sRGB gamma mapping, per IEC 61966-2-1:1999, with 16 control points:</p> |
| * <pre><code>android.tonemap.curveRed = [ |
| * 0.0000, 0.0000, 0.0667, 0.2864, 0.1333, 0.4007, 0.2000, 0.4845, |
| * 0.2667, 0.5532, 0.3333, 0.6125, 0.4000, 0.6652, 0.4667, 0.7130, |
| * 0.5333, 0.7569, 0.6000, 0.7977, 0.6667, 0.8360, 0.7333, 0.8721, |
| * 0.8000, 0.9063, 0.8667, 0.9389, 0.9333, 0.9701, 1.0000, 1.0000 ] |
| * </code></pre> |
| * <p><img alt="sRGB tonemapping curve" src="../../../../images/camera2/metadata/android.tonemap.curveRed/srgb_tonemap.png" /></p> |
| * <p><b>Range of valid values:</b><br> |
| * 0-1 on both input and output coordinates, normalized |
| * as a floating-point value such that 0 == black and 1 == white.</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CameraCharacteristics#TONEMAP_MAX_CURVE_POINTS |
| * @see CaptureRequest#TONEMAP_MODE |
| * @hide |
| */ |
| public static final Key<float[]> TONEMAP_CURVE_RED = |
| new Key<float[]>("android.tonemap.curveRed", float[].class); |
| |
| /** |
| * <p>Tonemapping / contrast / gamma curve to use when {@link CaptureRequest#TONEMAP_MODE android.tonemap.mode} |
| * is CONTRAST_CURVE.</p> |
| * <p>The tonemapCurve consist of three curves for each of red, green, and blue |
| * channels respectively. The following example uses the red channel as an |
| * example. The same logic applies to green and blue channel. |
| * Each channel's curve is defined by an array of control points:</p> |
| * <pre><code>curveRed = |
| * [ P0(in, out), P1(in, out), P2(in, out), P3(in, out), ..., PN(in, out) ] |
| * 2 <= N <= {@link CameraCharacteristics#TONEMAP_MAX_CURVE_POINTS android.tonemap.maxCurvePoints}</code></pre> |
| * <p>These are sorted in order of increasing <code>Pin</code>; it is always |
| * guaranteed that input values 0.0 and 1.0 are included in the list to |
| * define a complete mapping. For input values between control points, |
| * the camera device must linearly interpolate between the control |
| * points.</p> |
| * <p>Each curve can have an independent number of points, and the number |
| * of points can be less than max (that is, the request doesn't have to |
| * always provide a curve with number of points equivalent to |
| * {@link CameraCharacteristics#TONEMAP_MAX_CURVE_POINTS android.tonemap.maxCurvePoints}).</p> |
| * <p>A few examples, and their corresponding graphical mappings; these |
| * only specify the red channel and the precision is limited to 4 |
| * digits, for conciseness.</p> |
| * <p>Linear mapping:</p> |
| * <pre><code>curveRed = [ (0, 0), (1.0, 1.0) ] |
| * </code></pre> |
| * <p><img alt="Linear mapping curve" src="../../../../images/camera2/metadata/android.tonemap.curveRed/linear_tonemap.png" /></p> |
| * <p>Invert mapping:</p> |
| * <pre><code>curveRed = [ (0, 1.0), (1.0, 0) ] |
| * </code></pre> |
| * <p><img alt="Inverting mapping curve" src="../../../../images/camera2/metadata/android.tonemap.curveRed/inverse_tonemap.png" /></p> |
| * <p>Gamma 1/2.2 mapping, with 16 control points:</p> |
| * <pre><code>curveRed = [ |
| * (0.0000, 0.0000), (0.0667, 0.2920), (0.1333, 0.4002), (0.2000, 0.4812), |
| * (0.2667, 0.5484), (0.3333, 0.6069), (0.4000, 0.6594), (0.4667, 0.7072), |
| * (0.5333, 0.7515), (0.6000, 0.7928), (0.6667, 0.8317), (0.7333, 0.8685), |
| * (0.8000, 0.9035), (0.8667, 0.9370), (0.9333, 0.9691), (1.0000, 1.0000) ] |
| * </code></pre> |
| * <p><img alt="Gamma = 1/2.2 tonemapping curve" src="../../../../images/camera2/metadata/android.tonemap.curveRed/gamma_tonemap.png" /></p> |
| * <p>Standard sRGB gamma mapping, per IEC 61966-2-1:1999, with 16 control points:</p> |
| * <pre><code>curveRed = [ |
| * (0.0000, 0.0000), (0.0667, 0.2864), (0.1333, 0.4007), (0.2000, 0.4845), |
| * (0.2667, 0.5532), (0.3333, 0.6125), (0.4000, 0.6652), (0.4667, 0.7130), |
| * (0.5333, 0.7569), (0.6000, 0.7977), (0.6667, 0.8360), (0.7333, 0.8721), |
| * (0.8000, 0.9063), (0.8667, 0.9389), (0.9333, 0.9701), (1.0000, 1.0000) ] |
| * </code></pre> |
| * <p><img alt="sRGB tonemapping curve" src="../../../../images/camera2/metadata/android.tonemap.curveRed/srgb_tonemap.png" /></p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CameraCharacteristics#TONEMAP_MAX_CURVE_POINTS |
| * @see CaptureRequest#TONEMAP_MODE |
| */ |
| @PublicKey |
| @SyntheticKey |
| public static final Key<android.hardware.camera2.params.TonemapCurve> TONEMAP_CURVE = |
| new Key<android.hardware.camera2.params.TonemapCurve>("android.tonemap.curve", android.hardware.camera2.params.TonemapCurve.class); |
| |
| /** |
| * <p>High-level global contrast/gamma/tonemapping control.</p> |
| * <p>When switching to an application-defined contrast curve by setting |
| * {@link CaptureRequest#TONEMAP_MODE android.tonemap.mode} to CONTRAST_CURVE, the curve is defined |
| * per-channel with a set of <code>(in, out)</code> points that specify the |
| * mapping from input high-bit-depth pixel value to the output |
| * low-bit-depth value. Since the actual pixel ranges of both input |
| * and output may change depending on the camera pipeline, the values |
| * are specified by normalized floating-point numbers.</p> |
| * <p>More-complex color mapping operations such as 3D color look-up |
| * tables, selective chroma enhancement, or other non-linear color |
| * transforms will be disabled when {@link CaptureRequest#TONEMAP_MODE android.tonemap.mode} is |
| * CONTRAST_CURVE.</p> |
| * <p>When using either FAST or HIGH_QUALITY, the camera device will |
| * emit its own tonemap curve in {@link CaptureRequest#TONEMAP_CURVE android.tonemap.curve}. |
| * These values are always available, and as close as possible to the |
| * actually used nonlinear/nonglobal transforms.</p> |
| * <p>If a request is sent with CONTRAST_CURVE with the camera device's |
| * provided curve in FAST or HIGH_QUALITY, the image's tonemap will be |
| * roughly the same.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #TONEMAP_MODE_CONTRAST_CURVE CONTRAST_CURVE}</li> |
| * <li>{@link #TONEMAP_MODE_FAST FAST}</li> |
| * <li>{@link #TONEMAP_MODE_HIGH_QUALITY HIGH_QUALITY}</li> |
| * <li>{@link #TONEMAP_MODE_GAMMA_VALUE GAMMA_VALUE}</li> |
| * <li>{@link #TONEMAP_MODE_PRESET_CURVE PRESET_CURVE}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br> |
| * {@link CameraCharacteristics#TONEMAP_AVAILABLE_TONE_MAP_MODES android.tonemap.availableToneMapModes}</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CameraCharacteristics#TONEMAP_AVAILABLE_TONE_MAP_MODES |
| * @see CaptureRequest#TONEMAP_CURVE |
| * @see CaptureRequest#TONEMAP_MODE |
| * @see #TONEMAP_MODE_CONTRAST_CURVE |
| * @see #TONEMAP_MODE_FAST |
| * @see #TONEMAP_MODE_HIGH_QUALITY |
| * @see #TONEMAP_MODE_GAMMA_VALUE |
| * @see #TONEMAP_MODE_PRESET_CURVE |
| */ |
| @PublicKey |
| public static final Key<Integer> TONEMAP_MODE = |
| new Key<Integer>("android.tonemap.mode", int.class); |
| |
| /** |
| * <p>Tonemapping curve to use when {@link CaptureRequest#TONEMAP_MODE android.tonemap.mode} is |
| * GAMMA_VALUE</p> |
| * <p>The tonemap curve will be defined the following formula: |
| * * OUT = pow(IN, 1.0 / gamma) |
| * where IN and OUT is the input pixel value scaled to range [0.0, 1.0], |
| * pow is the power function and gamma is the gamma value specified by this |
| * key.</p> |
| * <p>The same curve will be applied to all color channels. The camera device |
| * may clip the input gamma value to its supported range. The actual applied |
| * value will be returned in capture result.</p> |
| * <p>The valid range of gamma value varies on different devices, but values |
| * within [1.0, 5.0] are guaranteed not to be clipped.</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * |
| * @see CaptureRequest#TONEMAP_MODE |
| */ |
| @PublicKey |
| public static final Key<Float> TONEMAP_GAMMA = |
| new Key<Float>("android.tonemap.gamma", float.class); |
| |
| /** |
| * <p>Tonemapping curve to use when {@link CaptureRequest#TONEMAP_MODE android.tonemap.mode} is |
| * PRESET_CURVE</p> |
| * <p>The tonemap curve will be defined by specified standard.</p> |
| * <p>sRGB (approximated by 16 control points):</p> |
| * <p><img alt="sRGB tonemapping curve" src="../../../../images/camera2/metadata/android.tonemap.curveRed/srgb_tonemap.png" /></p> |
| * <p>Rec. 709 (approximated by 16 control points):</p> |
| * <p><img alt="Rec. 709 tonemapping curve" src="../../../../images/camera2/metadata/android.tonemap.curveRed/rec709_tonemap.png" /></p> |
| * <p>Note that above figures show a 16 control points approximation of preset |
| * curves. Camera devices may apply a different approximation to the curve.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #TONEMAP_PRESET_CURVE_SRGB SRGB}</li> |
| * <li>{@link #TONEMAP_PRESET_CURVE_REC709 REC709}</li> |
| * </ul></p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * |
| * @see CaptureRequest#TONEMAP_MODE |
| * @see #TONEMAP_PRESET_CURVE_SRGB |
| * @see #TONEMAP_PRESET_CURVE_REC709 |
| */ |
| @PublicKey |
| public static final Key<Integer> TONEMAP_PRESET_CURVE = |
| new Key<Integer>("android.tonemap.presetCurve", int.class); |
| |
| /** |
| * <p>This LED is nominally used to indicate to the user |
| * that the camera is powered on and may be streaming images back to the |
| * Application Processor. In certain rare circumstances, the OS may |
| * disable this when video is processed locally and not transmitted to |
| * any untrusted applications.</p> |
| * <p>In particular, the LED <em>must</em> always be on when the data could be |
| * transmitted off the device. The LED <em>should</em> always be on whenever |
| * data is stored locally on the device.</p> |
| * <p>The LED <em>may</em> be off if a trusted application is using the data that |
| * doesn't violate the above rules.</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * @hide |
| */ |
| public static final Key<Boolean> LED_TRANSMIT = |
| new Key<Boolean>("android.led.transmit", boolean.class); |
| |
| /** |
| * <p>Whether black-level compensation is locked |
| * to its current values, or is free to vary.</p> |
| * <p>Whether the black level offset was locked for this frame. Should be |
| * ON if {@link CaptureRequest#BLACK_LEVEL_LOCK android.blackLevel.lock} was ON in the capture request, unless |
| * a change in other capture settings forced the camera device to |
| * perform a black level reset.</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Full capability</b> - |
| * Present on all camera devices that report being {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_FULL HARDWARE_LEVEL_FULL} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CaptureRequest#BLACK_LEVEL_LOCK |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| */ |
| @PublicKey |
| public static final Key<Boolean> BLACK_LEVEL_LOCK = |
| new Key<Boolean>("android.blackLevel.lock", boolean.class); |
| |
| /** |
| * <p>The frame number corresponding to the last request |
| * with which the output result (metadata + buffers) has been fully |
| * synchronized.</p> |
| * <p>When a request is submitted to the camera device, there is usually a |
| * delay of several frames before the controls get applied. A camera |
| * device may either choose to account for this delay by implementing a |
| * pipeline and carefully submit well-timed atomic control updates, or |
| * it may start streaming control changes that span over several frame |
| * boundaries.</p> |
| * <p>In the latter case, whenever a request's settings change relative to |
| * the previous submitted request, the full set of changes may take |
| * multiple frame durations to fully take effect. Some settings may |
| * take effect sooner (in less frame durations) than others.</p> |
| * <p>While a set of control changes are being propagated, this value |
| * will be CONVERGING.</p> |
| * <p>Once it is fully known that a set of control changes have been |
| * finished propagating, and the resulting updated control settings |
| * have been read back by the camera device, this value will be set |
| * to a non-negative frame number (corresponding to the request to |
| * which the results have synchronized to).</p> |
| * <p>Older camera device implementations may not have a way to detect |
| * when all camera controls have been applied, and will always set this |
| * value to UNKNOWN.</p> |
| * <p>FULL capability devices will always have this value set to the |
| * frame number of the request corresponding to this result.</p> |
| * <p><em>Further details</em>:</p> |
| * <ul> |
| * <li>Whenever a request differs from the last request, any future |
| * results not yet returned may have this value set to CONVERGING (this |
| * could include any in-progress captures not yet returned by the camera |
| * device, for more details see pipeline considerations below).</li> |
| * <li>Submitting a series of multiple requests that differ from the |
| * previous request (e.g. r1, r2, r3 s.t. r1 != r2 != r3) |
| * moves the new synchronization frame to the last non-repeating |
| * request (using the smallest frame number from the contiguous list of |
| * repeating requests).</li> |
| * <li>Submitting the same request repeatedly will not change this value |
| * to CONVERGING, if it was already a non-negative value.</li> |
| * <li>When this value changes to non-negative, that means that all of the |
| * metadata controls from the request have been applied, all of the |
| * metadata controls from the camera device have been read to the |
| * updated values (into the result), and all of the graphics buffers |
| * corresponding to this result are also synchronized to the request.</li> |
| * </ul> |
| * <p><em>Pipeline considerations</em>:</p> |
| * <p>Submitting a request with updated controls relative to the previously |
| * submitted requests may also invalidate the synchronization state |
| * of all the results corresponding to currently in-flight requests.</p> |
| * <p>In other words, results for this current request and up to |
| * {@link CameraCharacteristics#REQUEST_PIPELINE_MAX_DEPTH android.request.pipelineMaxDepth} prior requests may have their |
| * android.sync.frameNumber change to CONVERGING.</p> |
| * <p><b>Possible values:</b> |
| * <ul> |
| * <li>{@link #SYNC_FRAME_NUMBER_CONVERGING CONVERGING}</li> |
| * <li>{@link #SYNC_FRAME_NUMBER_UNKNOWN UNKNOWN}</li> |
| * </ul></p> |
| * <p><b>Available values for this device:</b><br> |
| * Either a non-negative value corresponding to a |
| * <code>frame_number</code>, or one of the two enums (CONVERGING / UNKNOWN).</p> |
| * <p>This key is available on all devices.</p> |
| * |
| * @see CameraCharacteristics#REQUEST_PIPELINE_MAX_DEPTH |
| * @see #SYNC_FRAME_NUMBER_CONVERGING |
| * @see #SYNC_FRAME_NUMBER_UNKNOWN |
| * @hide |
| */ |
| public static final Key<Long> SYNC_FRAME_NUMBER = |
| new Key<Long>("android.sync.frameNumber", long.class); |
| |
| /** |
| * <p>The amount of exposure time increase factor applied to the original output |
| * frame by the application processing before sending for reprocessing.</p> |
| * <p>This is optional, and will be supported if the camera device supports YUV_REPROCESSING |
| * capability ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES android.request.availableCapabilities} contains YUV_REPROCESSING).</p> |
| * <p>For some YUV reprocessing use cases, the application may choose to filter the original |
| * output frames to effectively reduce the noise to the same level as a frame that was |
| * captured with longer exposure time. To be more specific, assuming the original captured |
| * images were captured with a sensitivity of S and an exposure time of T, the model in |
| * the camera device is that the amount of noise in the image would be approximately what |
| * would be expected if the original capture parameters had been a sensitivity of |
| * S/effectiveExposureFactor and an exposure time of T*effectiveExposureFactor, rather |
| * than S and T respectively. If the captured images were processed by the application |
| * before being sent for reprocessing, then the application may have used image processing |
| * algorithms and/or multi-frame image fusion to reduce the noise in the |
| * application-processed images (input images). By using the effectiveExposureFactor |
| * control, the application can communicate to the camera device the actual noise level |
| * improvement in the application-processed image. With this information, the camera |
| * device can select appropriate noise reduction and edge enhancement parameters to avoid |
| * excessive noise reduction ({@link CaptureRequest#NOISE_REDUCTION_MODE android.noiseReduction.mode}) and insufficient edge |
| * enhancement ({@link CaptureRequest#EDGE_MODE android.edge.mode}) being applied to the reprocessed frames.</p> |
| * <p>For example, for multi-frame image fusion use case, the application may fuse |
| * multiple output frames together to a final frame for reprocessing. When N image are |
| * fused into 1 image for reprocessing, the exposure time increase factor could be up to |
| * square root of N (based on a simple photon shot noise model). The camera device will |
| * adjust the reprocessing noise reduction and edge enhancement parameters accordingly to |
| * produce the best quality images.</p> |
| * <p>This is relative factor, 1.0 indicates the application hasn't processed the input |
| * buffer in a way that affects its effective exposure time.</p> |
| * <p>This control is only effective for YUV reprocessing capture request. For noise |
| * reduction reprocessing, it is only effective when <code>{@link CaptureRequest#NOISE_REDUCTION_MODE android.noiseReduction.mode} != OFF</code>. |
| * Similarly, for edge enhancement reprocessing, it is only effective when |
| * <code>{@link CaptureRequest#EDGE_MODE android.edge.mode} != OFF</code>.</p> |
| * <p><b>Units</b>: Relative exposure time increase factor.</p> |
| * <p><b>Range of valid values:</b><br> |
| * >= 1.0</p> |
| * <p><b>Optional</b> - This value may be {@code null} on some devices.</p> |
| * <p><b>Limited capability</b> - |
| * Present on all camera devices that report being at least {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED HARDWARE_LEVEL_LIMITED} devices in the |
| * {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel} key</p> |
| * |
| * @see CaptureRequest#EDGE_MODE |
| * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL |
| * @see CaptureRequest#NOISE_REDUCTION_MODE |
| * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES |
| */ |
| @PublicKey |
| public static final Key<Float> REPROCESS_EFFECTIVE_EXPOSURE_FACTOR = |
| new Key<Float>("android.reprocess.effectiveExposureFactor", float.class); |
| |
| /*~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~ |
| * End generated code |
| *~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~O@*/ |
| |
| |
| |
| } |