| /* |
| * Copyright (C) 2009 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.app.backup; |
| |
| import android.app.backup.IFullBackupRestoreObserver; |
| import android.app.backup.IRestoreSession; |
| import android.os.ParcelFileDescriptor; |
| import android.content.Intent; |
| |
| /** |
| * Direct interface to the Backup Manager Service that applications invoke on. The only |
| * operation currently needed is a simple notification that the app has made changes to |
| * data it wishes to back up, so the system should run a backup pass. |
| * |
| * Apps will use the {@link android.app.backup.BackupManager} class rather than going through |
| * this Binder interface directly. |
| * |
| * {@hide} |
| */ |
| interface IBackupManager { |
| /** |
| * Tell the system service that the caller has made changes to its |
| * data, and therefore needs to undergo an incremental backup pass. |
| * |
| * Any application can invoke this method for its own package, but |
| * only callers who hold the android.permission.BACKUP permission |
| * may invoke it for arbitrary packages. |
| */ |
| void dataChanged(String packageName); |
| |
| /** |
| * Erase all backed-up data for the given package from the storage |
| * destination. |
| * |
| * Any application can invoke this method for its own package, but |
| * only callers who hold the android.permission.BACKUP permission |
| * may invoke it for arbitrary packages. |
| */ |
| void clearBackupData(String packageName); |
| |
| /** |
| * Notifies the Backup Manager Service that an agent has become available. This |
| * method is only invoked by the Activity Manager. |
| */ |
| void agentConnected(String packageName, IBinder agent); |
| |
| /** |
| * Notify the Backup Manager Service that an agent has unexpectedly gone away. |
| * This method is only invoked by the Activity Manager. |
| */ |
| void agentDisconnected(String packageName); |
| |
| /** |
| * Notify the Backup Manager Service that an application being installed will |
| * need a data-restore pass. This method is only invoked by the Package Manager. |
| */ |
| void restoreAtInstall(String packageName, int token); |
| |
| /** |
| * Enable/disable the backup service entirely. When disabled, no backup |
| * or restore operations will take place. Data-changed notifications will |
| * still be observed and collected, however, so that changes made while the |
| * mechanism was disabled will still be backed up properly if it is enabled |
| * at some point in the future. |
| * |
| * <p>Callers must hold the android.permission.BACKUP permission to use this method. |
| */ |
| void setBackupEnabled(boolean isEnabled); |
| |
| /** |
| * Enable/disable automatic restore of application data at install time. When |
| * enabled, installation of any package will involve the Backup Manager. If data |
| * exists for the newly-installed package, either from the device's current [enabled] |
| * backup dataset or from the restore set used in the last wholesale restore operation, |
| * that data will be supplied to the new package's restore agent before the package |
| * is made generally available for launch. |
| * |
| * <p>Callers must hold the android.permission.BACKUP permission to use this method. |
| * |
| * @param doAutoRestore When true, enables the automatic app-data restore facility. When |
| * false, this facility will be disabled. |
| */ |
| void setAutoRestore(boolean doAutoRestore); |
| |
| /** |
| * Indicate that any necessary one-time provisioning has occurred. |
| * |
| * <p>Callers must hold the android.permission.BACKUP permission to use this method. |
| */ |
| void setBackupProvisioned(boolean isProvisioned); |
| |
| /** |
| * Report whether the backup mechanism is currently enabled. |
| * |
| * <p>Callers must hold the android.permission.BACKUP permission to use this method. |
| */ |
| boolean isBackupEnabled(); |
| |
| /** |
| * Set the device's backup password. Returns {@code true} if the password was set |
| * successfully, {@code false} otherwise. Typically a failure means that an incorrect |
| * current password was supplied. |
| * |
| * <p>Callers must hold the android.permission.BACKUP permission to use this method. |
| */ |
| boolean setBackupPassword(in String currentPw, in String newPw); |
| |
| /** |
| * Reports whether a backup password is currently set. If not, then a null or empty |
| * "current password" argument should be passed to setBackupPassword(). |
| * |
| * <p>Callers must hold the android.permission.BACKUP permission to use this method. |
| */ |
| boolean hasBackupPassword(); |
| |
| /** |
| * Schedule an immediate backup attempt for all pending updates. This is |
| * primarily intended for transports to use when they detect a suitable |
| * opportunity for doing a backup pass. If there are no pending updates to |
| * be sent, no action will be taken. Even if some updates are pending, the |
| * transport will still be asked to confirm via the usual requestBackupTime() |
| * method. |
| * |
| * <p>Callers must hold the android.permission.BACKUP permission to use this method. |
| */ |
| void backupNow(); |
| |
| /** |
| * Write a full backup of the given package to the supplied file descriptor. |
| * The fd may be a socket or other non-seekable destination. If no package names |
| * are supplied, then every application on the device will be backed up to the output. |
| * |
| * <p>This method is <i>synchronous</i> -- it does not return until the backup has |
| * completed. |
| * |
| * <p>Callers must hold the android.permission.BACKUP permission to use this method. |
| * |
| * @param fd The file descriptor to which a 'tar' file stream is to be written |
| * @param includeApks If <code>true</code>, the resulting tar stream will include the |
| * application .apk files themselves as well as their data. |
| * @param includeObbs If <code>true</code>, the resulting tar stream will include any |
| * application expansion (OBB) files themselves belonging to each application. |
| * @param includeShared If <code>true</code>, the resulting tar stream will include |
| * the contents of the device's shared storage (SD card or equivalent). |
| * @param allApps If <code>true</code>, the resulting tar stream will include all |
| * installed applications' data, not just those named in the <code>packageNames</code> |
| * parameter. |
| * @param allIncludesSystem If {@code true}, then {@code allApps} will be interpreted |
| * as including packages pre-installed as part of the system. If {@code false}, |
| * then setting {@code allApps} to {@code true} will mean only that all 3rd-party |
| * applications will be included in the dataset. |
| * @param packageNames The package names of the apps whose data (and optionally .apk files) |
| * are to be backed up. The <code>allApps</code> parameter supersedes this. |
| */ |
| void fullBackup(in ParcelFileDescriptor fd, boolean includeApks, boolean includeObbs, |
| boolean includeShared, boolean allApps, boolean allIncludesSystem, |
| in String[] packageNames); |
| |
| /** |
| * Restore device content from the data stream passed through the given socket. The |
| * data stream must be in the format emitted by fullBackup(). |
| * |
| * <p>Callers must hold the android.permission.BACKUP permission to use this method. |
| */ |
| void fullRestore(in ParcelFileDescriptor fd); |
| |
| /** |
| * Confirm that the requested full backup/restore operation can proceed. The system will |
| * not actually perform the operation described to fullBackup() / fullRestore() unless the |
| * UI calls back into the Backup Manager to confirm, passing the correct token. At |
| * the same time, the UI supplies a callback Binder for progress notifications during |
| * the operation. |
| * |
| * <p>The password passed by the confirming entity must match the saved backup or |
| * full-device encryption password in order to perform a backup. If a password is |
| * supplied for restore, it must match the password used when creating the full |
| * backup dataset being used for restore. |
| * |
| * <p>Callers must hold the android.permission.BACKUP permission to use this method. |
| */ |
| void acknowledgeFullBackupOrRestore(int token, boolean allow, |
| in String curPassword, in String encryptionPassword, |
| IFullBackupRestoreObserver observer); |
| |
| /** |
| * Identify the currently selected transport. Callers must hold the |
| * android.permission.BACKUP permission to use this method. |
| */ |
| String getCurrentTransport(); |
| |
| /** |
| * Request a list of all available backup transports' names. Callers must |
| * hold the android.permission.BACKUP permission to use this method. |
| */ |
| String[] listAllTransports(); |
| |
| /** |
| * Specify the current backup transport. Callers must hold the |
| * android.permission.BACKUP permission to use this method. |
| * |
| * @param transport The name of the transport to select. This should be one |
| * of {@link BackupManager.TRANSPORT_GOOGLE} or {@link BackupManager.TRANSPORT_ADB}. |
| * @return The name of the previously selected transport. If the given transport |
| * name is not one of the currently available transports, no change is made to |
| * the current transport setting and the method returns null. |
| */ |
| String selectBackupTransport(String transport); |
| |
| /** |
| * Get the configuration Intent, if any, from the given transport. Callers must |
| * hold the android.permission.BACKUP permission in order to use this method. |
| * |
| * @param transport The name of the transport to query. |
| * @return An Intent to use with Activity#startActivity() to bring up the configuration |
| * UI supplied by the transport. If the transport has no configuration UI, it should |
| * return {@code null} here. |
| */ |
| Intent getConfigurationIntent(String transport); |
| |
| /** |
| * Get the destination string supplied by the given transport. Callers must |
| * hold the android.permission.BACKUP permission in order to use this method. |
| * |
| * @param transport The name of the transport to query. |
| * @return A string describing the current backup destination. This string is used |
| * verbatim by the Settings UI as the summary text of the "configure..." item. |
| */ |
| String getDestinationString(String transport); |
| |
| /** |
| * Begin a restore session. Either or both of packageName and transportID |
| * may be null. If packageName is non-null, then only the given package will be |
| * considered for restore. If transportID is null, then the restore will use |
| * the current active transport. |
| * <p> |
| * This method requires the android.permission.BACKUP permission <i>except</i> |
| * when transportID is null and packageName is the name of the caller's own |
| * package. In that case, the restore session returned is suitable for supporting |
| * the BackupManager.requestRestore() functionality via RestoreSession.restorePackage() |
| * without requiring the app to hold any special permission. |
| * |
| * @param packageName The name of the single package for which a restore will |
| * be requested. May be null, in which case all packages in the restore |
| * set can be restored. |
| * @param transportID The name of the transport to use for the restore operation. |
| * May be null, in which case the current active transport is used. |
| * @return An interface to the restore session, or null on error. |
| */ |
| IRestoreSession beginRestoreSession(String packageName, String transportID); |
| |
| /** |
| * Notify the backup manager that a BackupAgent has completed the operation |
| * corresponding to the given token. |
| * |
| * @param token The transaction token passed to a BackupAgent's doBackup() or |
| * doRestore() method. |
| * {@hide} |
| */ |
| void opComplete(int token); |
| } |