| /* |
| ** Copyright 2003-2010, VisualOn, Inc. |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| /******************************************************************************* |
| File: adj_thr.c |
| |
| Content: Threshold compensation functions |
| |
| *******************************************************************************/ |
| |
| #include "basic_op.h" |
| #include "oper_32b.h" |
| #include "adj_thr_data.h" |
| #include "adj_thr.h" |
| #include "qc_data.h" |
| #include "line_pe.h" |
| |
| |
| #define minSnrLimit 0x6666 /* 1 dB */ |
| #define PEBITS_COEF 0x170a /* 0.18*(1 << 15)*/ |
| |
| #define HOLE_THR_LONG 0x2873 /* 0.316*(1 << 15) */ |
| #define HOLE_THR_SHORT 0x4000 /* 0.5 *(1 << 15) */ |
| |
| #define MS_THRSPREAD_COEF 0x7333 /* 0.9 * (1 << 15) */ |
| |
| #define MIN_SNR_COEF 0x651f /* 3.16* (1 << (15 - 2)) */ |
| |
| /* values for avoid hole flag */ |
| enum _avoid_hole_state { |
| NO_AH =0, |
| AH_INACTIVE =1, |
| AH_ACTIVE =2 |
| }; |
| |
| /******************************************************************************** |
| * |
| * function name:bits2pe |
| * description: convert from bits to pe |
| * pe = 1.18*desiredBits |
| * |
| **********************************************************************************/ |
| Word16 bits2pe(const Word16 bits) { |
| return (bits + ((PEBITS_COEF * bits) >> 15)); |
| } |
| |
| /******************************************************************************** |
| * |
| * function name:calcThreshExp |
| * description: loudness calculation (threshold to the power of redExp) |
| * thr(n)^0.25 |
| * |
| **********************************************************************************/ |
| static void calcThreshExp(Word32 thrExp[MAX_CHANNELS][MAX_GROUPED_SFB], |
| PSY_OUT_CHANNEL psyOutChannel[MAX_CHANNELS], |
| const Word16 nChannels) |
| { |
| Word16 ch, sfb, sfbGrp; |
| Word32 *pthrExp, *psfbThre; |
| for (ch=0; ch<nChannels; ch++) { |
| PSY_OUT_CHANNEL *psyOutChan = &psyOutChannel[ch]; |
| for(sfbGrp = 0; sfbGrp < psyOutChan->sfbCnt; sfbGrp+= psyOutChan->sfbPerGroup) |
| pthrExp = &(thrExp[ch][sfbGrp]); |
| psfbThre = psyOutChan->sfbThreshold + sfbGrp; |
| for (sfb=0; sfb<psyOutChan->maxSfbPerGroup; sfb++) { |
| *pthrExp = rsqrt(rsqrt(*psfbThre,INT_BITS),INT_BITS); |
| pthrExp++; psfbThre++; |
| } |
| } |
| } |
| |
| /******************************************************************************** |
| * |
| * function name:adaptMinSnr |
| * description: reduce minSnr requirements for bands with relative low energies |
| * |
| **********************************************************************************/ |
| static void adaptMinSnr(PSY_OUT_CHANNEL psyOutChannel[MAX_CHANNELS], |
| Word16 logSfbEnergy[MAX_CHANNELS][MAX_GROUPED_SFB], |
| MINSNR_ADAPT_PARAM *msaParam, |
| const Word16 nChannels) |
| { |
| Word16 ch, sfb, sfbOffs, shift; |
| Word32 nSfb, avgEn; |
| Word16 log_avgEn = 0; |
| Word32 startRatio_x_avgEn = 0; |
| |
| |
| for (ch=0; ch<nChannels; ch++) { |
| PSY_OUT_CHANNEL* psyOutChan = &psyOutChannel[ch]; |
| |
| /* calc average energy per scalefactor band */ |
| avgEn = 0; |
| nSfb = 0; |
| for (sfbOffs=0; sfbOffs<psyOutChan->sfbCnt; sfbOffs+=psyOutChan->sfbPerGroup) { |
| for (sfb=0; sfb<psyOutChan->maxSfbPerGroup; sfb++) { |
| avgEn = L_add(avgEn, psyOutChan->sfbEnergy[sfbOffs+sfb]); |
| nSfb = nSfb + 1; |
| } |
| } |
| |
| if (nSfb > 0) { |
| avgEn = avgEn / nSfb; |
| |
| log_avgEn = iLog4(avgEn); |
| startRatio_x_avgEn = fixmul(msaParam->startRatio, avgEn); |
| } |
| |
| |
| /* reduce minSnr requirement by minSnr^minSnrRed dependent on avgEn/sfbEn */ |
| for (sfbOffs=0; sfbOffs<psyOutChan->sfbCnt; sfbOffs+=psyOutChan->sfbPerGroup) { |
| for (sfb=0; sfb<psyOutChan->maxSfbPerGroup; sfb++) { |
| if (psyOutChan->sfbEnergy[sfbOffs+sfb] < startRatio_x_avgEn) { |
| Word16 dbRatio, minSnrRed; |
| Word32 snrRed; |
| Word16 newMinSnr; |
| |
| dbRatio = log_avgEn - logSfbEnergy[ch][sfbOffs+sfb]; |
| dbRatio = dbRatio + (dbRatio << 1); |
| |
| minSnrRed = 110 - ((dbRatio + (dbRatio << 1)) >> 2); |
| minSnrRed = max(minSnrRed, 20); /* 110: (0.375(redOffs)+1)*80, |
| 3: 0.00375(redRatioFac)*80 |
| 20: 0.25(maxRed) * 80 */ |
| |
| snrRed = minSnrRed * iLog4((psyOutChan->sfbMinSnr[sfbOffs+sfb] << 16)); |
| /* |
| snrRedI si now scaled by 80 (minSnrRed) and 4 (ffr_iLog4) |
| */ |
| |
| newMinSnr = round16(pow2_xy(snrRed,80*4)); |
| |
| psyOutChan->sfbMinSnr[sfbOffs+sfb] = min(newMinSnr, minSnrLimit); |
| } |
| } |
| } |
| } |
| |
| } |
| |
| |
| /******************************************************************************** |
| * |
| * function name:initAvoidHoleFlag |
| * description: determine bands where avoid hole is not necessary resp. possible |
| * |
| **********************************************************************************/ |
| static void initAvoidHoleFlag(Word16 ahFlag[MAX_CHANNELS][MAX_GROUPED_SFB], |
| PSY_OUT_CHANNEL psyOutChannel[MAX_CHANNELS], |
| PSY_OUT_ELEMENT* psyOutElement, |
| const Word16 nChannels, |
| AH_PARAM *ahParam) |
| { |
| Word16 ch, sfb, sfbGrp, shift; |
| Word32 threshold; |
| Word32* psfbSpreadEn; |
| |
| for (ch=0; ch<nChannels; ch++) { |
| PSY_OUT_CHANNEL *psyOutChan = &psyOutChannel[ch]; |
| |
| if (psyOutChan->windowSequence != SHORT_WINDOW) { |
| for(sfbGrp = 0;sfbGrp < psyOutChan->sfbCnt;sfbGrp+= psyOutChan->sfbPerGroup){ |
| psfbSpreadEn = psyOutChan->sfbSpreadedEnergy + sfbGrp; |
| for (sfb=0; sfb<psyOutChan->maxSfbPerGroup; sfb++) { |
| *psfbSpreadEn = *psfbSpreadEn >> 1; /* 0.5 */ |
| ++psfbSpreadEn; |
| } |
| } |
| } |
| else { |
| for(sfbGrp = 0;sfbGrp < psyOutChan->sfbCnt;sfbGrp+= psyOutChan->sfbPerGroup){ |
| psfbSpreadEn = psyOutChan->sfbSpreadedEnergy + sfbGrp; |
| for (sfb=0; sfb<psyOutChan->maxSfbPerGroup; sfb++) { |
| *psfbSpreadEn = (*psfbSpreadEn >> 1) + (*psfbSpreadEn >> 3); /* 0.63 */ |
| ++psfbSpreadEn; |
| } |
| } |
| } |
| } |
| |
| /* increase minSnr for local peaks, decrease it for valleys */ |
| if (ahParam->modifyMinSnr) { |
| for(ch=0; ch<nChannels; ch++) { |
| PSY_OUT_CHANNEL *psyOutChan = &psyOutChannel[ch]; |
| |
| if (psyOutChan->windowSequence != SHORT_WINDOW) |
| threshold = HOLE_THR_LONG; |
| else |
| threshold = HOLE_THR_SHORT; |
| |
| for(sfbGrp = 0;sfbGrp < psyOutChan->sfbCnt;sfbGrp+= psyOutChan->sfbPerGroup){ |
| Word16 *psfbMinSnr = psyOutChan->sfbMinSnr + sfbGrp; |
| for (sfb=0; sfb<psyOutChan->maxSfbPerGroup; sfb++) { |
| Word32 sfbEn, sfbEnm1, sfbEnp1, avgEn; |
| |
| if (sfb > 0) |
| sfbEnm1 = psyOutChan->sfbEnergy[sfbGrp+sfb-1]; |
| else |
| sfbEnm1 = psyOutChan->sfbEnergy[sfbGrp]; |
| |
| if (sfb < (psyOutChan->maxSfbPerGroup-1)) |
| sfbEnp1 = psyOutChan->sfbEnergy[sfbGrp+sfb+1]; |
| else |
| sfbEnp1 = psyOutChan->sfbEnergy[sfbGrp+sfb]; |
| avgEn = (sfbEnm1 + sfbEnp1) >> 1; |
| sfbEn = psyOutChan->sfbEnergy[sfbGrp+sfb]; |
| |
| if (sfbEn > avgEn && avgEn > 0) { |
| Word32 tmpMinSnr; |
| shift = norm_l(sfbEn); |
| tmpMinSnr = Div_32(L_mpy_ls(avgEn, minSnrLimit) << shift, sfbEn << shift ); |
| tmpMinSnr = max(tmpMinSnr, HOLE_THR_LONG); |
| tmpMinSnr = max(tmpMinSnr, threshold); |
| *psfbMinSnr = min(*psfbMinSnr, tmpMinSnr); |
| } |
| /* valley ? */ |
| |
| if ((sfbEn < (avgEn >> 1)) && (sfbEn > 0)) { |
| Word32 tmpMinSnr; |
| Word32 minSnrEn = L_mpy_wx(avgEn, *psfbMinSnr); |
| |
| if(minSnrEn < sfbEn) { |
| shift = norm_l(sfbEn); |
| tmpMinSnr = Div_32( minSnrEn << shift, sfbEn<<shift); |
| } |
| else { |
| tmpMinSnr = MAX_16; |
| } |
| tmpMinSnr = min(minSnrLimit, tmpMinSnr); |
| |
| *psfbMinSnr = |
| (min((tmpMinSnr >> 2), mult(*psfbMinSnr, MIN_SNR_COEF)) << 2); |
| } |
| psfbMinSnr++; |
| } |
| } |
| } |
| } |
| |
| /* stereo: adapt the minimum requirements sfbMinSnr of mid and |
| side channels */ |
| |
| if (nChannels == 2) { |
| PSY_OUT_CHANNEL *psyOutChanM = &psyOutChannel[0]; |
| PSY_OUT_CHANNEL *psyOutChanS = &psyOutChannel[1]; |
| for (sfb=0; sfb<psyOutChanM->sfbCnt; sfb++) { |
| if (psyOutElement->toolsInfo.msMask[sfb]) { |
| Word32 sfbEnM = psyOutChanM->sfbEnergy[sfb]; |
| Word32 sfbEnS = psyOutChanS->sfbEnergy[sfb]; |
| Word32 maxSfbEn = max(sfbEnM, sfbEnS); |
| Word32 maxThr = L_mpy_wx(maxSfbEn, psyOutChanM->sfbMinSnr[sfb]) >> 1; |
| |
| if(maxThr >= sfbEnM) { |
| psyOutChanM->sfbMinSnr[sfb] = MAX_16; |
| } |
| else { |
| shift = norm_l(sfbEnM); |
| psyOutChanM->sfbMinSnr[sfb] = min(max(psyOutChanM->sfbMinSnr[sfb], |
| round16(Div_32(maxThr<<shift, sfbEnM << shift))), minSnrLimit); |
| } |
| |
| if(maxThr >= sfbEnS) { |
| psyOutChanS->sfbMinSnr[sfb] = MAX_16; |
| } |
| else { |
| shift = norm_l(sfbEnS); |
| psyOutChanS->sfbMinSnr[sfb] = min(max(psyOutChanS->sfbMinSnr[sfb], |
| round16(Div_32(maxThr << shift, sfbEnS << shift))), minSnrLimit); |
| } |
| |
| |
| if (sfbEnM > psyOutChanM->sfbSpreadedEnergy[sfb]) |
| psyOutChanS->sfbSpreadedEnergy[sfb] = L_mpy_ls(sfbEnS, MS_THRSPREAD_COEF); |
| |
| if (sfbEnS > psyOutChanS->sfbSpreadedEnergy[sfb]) |
| psyOutChanM->sfbSpreadedEnergy[sfb] = L_mpy_ls(sfbEnM, MS_THRSPREAD_COEF); |
| } |
| } |
| } |
| |
| |
| /* init ahFlag (0: no ah necessary, 1: ah possible, 2: ah active */ |
| for(ch=0; ch<nChannels; ch++) { |
| PSY_OUT_CHANNEL *psyOutChan = &psyOutChannel[ch]; |
| for(sfbGrp = 0;sfbGrp < psyOutChan->sfbCnt;sfbGrp+= psyOutChan->sfbPerGroup){ |
| Word16 *pahFlag = ahFlag[ch] + sfbGrp; |
| for (sfb=0; sfb<psyOutChan->maxSfbPerGroup; sfb++) { |
| |
| if ((psyOutChan->sfbSpreadedEnergy[sfbGrp+sfb] > psyOutChan->sfbEnergy[sfbGrp+sfb]) || |
| (psyOutChan->sfbEnergy[sfbGrp+sfb] <= psyOutChan->sfbThreshold[sfbGrp+sfb]) || |
| (psyOutChan->sfbMinSnr[sfbGrp+sfb] == MAX_16)) { |
| *pahFlag++ = NO_AH; |
| } |
| else { |
| *pahFlag++ = AH_INACTIVE; |
| } |
| } |
| for (sfb=psyOutChan->maxSfbPerGroup; sfb<psyOutChan->sfbPerGroup; sfb++) { |
| *pahFlag++ = NO_AH; |
| } |
| } |
| } |
| } |
| |
| /******************************************************************************** |
| * |
| * function name:calcPeNoAH |
| * description: sum the pe data only for bands where avoid hole is inactive |
| * |
| **********************************************************************************/ |
| static void calcPeNoAH(Word16 *pe, |
| Word16 *constPart, |
| Word16 *nActiveLines, |
| PE_DATA *peData, |
| Word16 ahFlag[MAX_CHANNELS][MAX_GROUPED_SFB], |
| PSY_OUT_CHANNEL psyOutChannel[MAX_CHANNELS], |
| const Word16 nChannels) |
| { |
| Word16 ch, sfb, sfbGrp; |
| int ipe, iconstPart, inActiveLines; |
| |
| ipe = 0; |
| iconstPart = 0; |
| inActiveLines = 0; |
| for(ch=0; ch<nChannels; ch++) { |
| PSY_OUT_CHANNEL *psyOutChan = &psyOutChannel[ch]; |
| PE_CHANNEL_DATA *peChanData = &peData->peChannelData[ch]; |
| for(sfbGrp = 0;sfbGrp < psyOutChan->sfbCnt;sfbGrp+= psyOutChan->sfbPerGroup){ |
| for (sfb=0; sfb<psyOutChan->maxSfbPerGroup; sfb++) { |
| |
| if (ahFlag[ch][sfbGrp+sfb] < AH_ACTIVE) { |
| ipe = ipe + peChanData->sfbPe[sfbGrp+sfb]; |
| iconstPart = iconstPart + peChanData->sfbConstPart[sfbGrp+sfb]; |
| inActiveLines = inActiveLines + peChanData->sfbNActiveLines[sfbGrp+sfb]; |
| } |
| } |
| } |
| } |
| |
| *pe = saturate(ipe); |
| *constPart = saturate(iconstPart); |
| *nActiveLines = saturate(inActiveLines); |
| } |
| |
| /******************************************************************************** |
| * |
| * function name:reduceThresholds |
| * description: apply reduction formula |
| * |
| **********************************************************************************/ |
| static void reduceThresholds(PSY_OUT_CHANNEL psyOutChannel[MAX_CHANNELS], |
| Word16 ahFlag[MAX_CHANNELS][MAX_GROUPED_SFB], |
| Word32 thrExp[MAX_CHANNELS][MAX_GROUPED_SFB], |
| const Word16 nChannels, |
| const Word32 redVal) |
| { |
| Word32 sfbThrReduced; |
| Word32 *psfbEn, *psfbThr; |
| Word16 ch, sfb, sfbGrp; |
| |
| for(ch=0; ch<nChannels; ch++) { |
| PSY_OUT_CHANNEL *psyOutChan = &psyOutChannel[ch]; |
| for(sfbGrp=0; sfbGrp<psyOutChan->sfbCnt; sfbGrp+=psyOutChan->sfbPerGroup) { |
| psfbEn = psyOutChan->sfbEnergy + sfbGrp; |
| psfbThr = psyOutChan->sfbThreshold + sfbGrp; |
| for (sfb=0; sfb<psyOutChan->maxSfbPerGroup; sfb++) { |
| |
| if (*psfbEn > *psfbThr) { |
| /* threshold reduction formula */ |
| Word32 tmp = thrExp[ch][sfbGrp+sfb] + redVal; |
| tmp = fixmul(tmp, tmp); |
| sfbThrReduced = fixmul(tmp, tmp); |
| /* avoid holes */ |
| tmp = L_mpy_ls(*psfbEn, psyOutChan->sfbMinSnr[sfbGrp+sfb]); |
| |
| if ((sfbThrReduced > tmp) && |
| (ahFlag[ch][sfbGrp+sfb] != NO_AH)){ |
| sfbThrReduced = max(tmp, *psfbThr); |
| ahFlag[ch][sfbGrp+sfb] = AH_ACTIVE; |
| } |
| *psfbThr = sfbThrReduced; |
| } |
| |
| psfbEn++; psfbThr++; |
| } |
| } |
| } |
| } |
| |
| |
| /******************************************************************************** |
| * |
| * function name:correctThresh |
| * description: if pe difference deltaPe between desired pe and real pe is small enough, |
| * the difference can be distributed among the scale factor bands. |
| * |
| **********************************************************************************/ |
| static void correctThresh(PSY_OUT_CHANNEL psyOutChannel[MAX_CHANNELS], |
| Word16 ahFlag[MAX_CHANNELS][MAX_GROUPED_SFB], |
| PE_DATA *peData, |
| Word32 thrExp[MAX_CHANNELS][MAX_GROUPED_SFB], |
| const Word32 redVal, |
| const Word16 nChannels, |
| const Word32 deltaPe) |
| { |
| Word16 ch, sfb, sfbGrp,shift; |
| PSY_OUT_CHANNEL *psyOutChan; |
| PE_CHANNEL_DATA *peChanData; |
| Word32 deltaSfbPe; |
| Word32 normFactor; |
| Word32 *psfbPeFactors; |
| Word16 *psfbNActiveLines, *pahFlag; |
| Word32 sfbEn, sfbThr; |
| Word32 sfbThrReduced; |
| |
| /* for each sfb calc relative factors for pe changes */ |
| normFactor = 1; |
| for(ch=0; ch<nChannels; ch++) { |
| psyOutChan = &psyOutChannel[ch]; |
| peChanData = &peData->peChannelData[ch]; |
| for(sfbGrp = 0;sfbGrp < psyOutChan->sfbCnt;sfbGrp+= psyOutChan->sfbPerGroup){ |
| psfbPeFactors = peData->sfbPeFactors[ch] + sfbGrp; |
| psfbNActiveLines = peChanData->sfbNActiveLines + sfbGrp; |
| pahFlag = ahFlag[ch] + sfbGrp; |
| for (sfb=0; sfb<psyOutChan->maxSfbPerGroup; sfb++) { |
| Word32 redThrExp = thrExp[ch][sfbGrp+sfb] + redVal; |
| |
| if (((*pahFlag < AH_ACTIVE) || (deltaPe > 0)) && (redThrExp > 0) ) { |
| |
| *psfbPeFactors = (*psfbNActiveLines) * (0x7fffffff / redThrExp); |
| normFactor = L_add(normFactor, *psfbPeFactors); |
| } |
| else { |
| *psfbPeFactors = 0; |
| } |
| psfbPeFactors++; |
| pahFlag++; psfbNActiveLines++; |
| } |
| } |
| } |
| |
| |
| /* calculate new thresholds */ |
| for(ch=0; ch<nChannels; ch++) { |
| psyOutChan = &psyOutChannel[ch]; |
| peChanData = &peData->peChannelData[ch]; |
| for(sfbGrp = 0;sfbGrp < psyOutChan->sfbCnt;sfbGrp+= psyOutChan->sfbPerGroup){ |
| psfbPeFactors = peData->sfbPeFactors[ch] + sfbGrp; |
| psfbNActiveLines = peChanData->sfbNActiveLines + sfbGrp; |
| pahFlag = ahFlag[ch] + sfbGrp; |
| for (sfb=0; sfb<psyOutChan->maxSfbPerGroup; sfb++) { |
| /* pe difference for this sfb */ |
| deltaSfbPe = *psfbPeFactors * deltaPe; |
| |
| /* thr3(n) = thr2(n)*2^deltaSfbPe/b(n) */ |
| if (*psfbNActiveLines > 0) { |
| /* new threshold */ |
| Word32 thrFactor; |
| sfbEn = psyOutChan->sfbEnergy[sfbGrp+sfb]; |
| sfbThr = psyOutChan->sfbThreshold[sfbGrp+sfb]; |
| |
| if(deltaSfbPe >= 0){ |
| /* |
| reduce threshold |
| */ |
| thrFactor = pow2_xy(L_negate(deltaSfbPe), (normFactor* (*psfbNActiveLines))); |
| |
| sfbThrReduced = L_mpy_ls(sfbThr, round16(thrFactor)); |
| } |
| else { |
| /* |
| increase threshold |
| */ |
| thrFactor = pow2_xy(deltaSfbPe, (normFactor * (*psfbNActiveLines))); |
| |
| |
| if(thrFactor > sfbThr) { |
| shift = norm_l(thrFactor); |
| sfbThrReduced = Div_32( sfbThr << shift, thrFactor<<shift ); |
| } |
| else { |
| sfbThrReduced = MAX_32; |
| } |
| |
| } |
| |
| /* avoid hole */ |
| sfbEn = L_mpy_ls(sfbEn, psyOutChan->sfbMinSnr[sfbGrp+sfb]); |
| |
| if ((sfbThrReduced > sfbEn) && |
| (*pahFlag == AH_INACTIVE)) { |
| sfbThrReduced = max(sfbEn, sfbThr); |
| *pahFlag = AH_ACTIVE; |
| } |
| |
| psyOutChan->sfbThreshold[sfbGrp+sfb] = sfbThrReduced; |
| } |
| |
| pahFlag++; psfbNActiveLines++; psfbPeFactors++; |
| } |
| } |
| } |
| } |
| |
| |
| /******************************************************************************** |
| * |
| * function name:reduceMinSnr |
| * description: if the desired pe can not be reached, reduce pe by reducing minSnr |
| * |
| **********************************************************************************/ |
| static void reduceMinSnr(PSY_OUT_CHANNEL psyOutChannel[MAX_CHANNELS], |
| PE_DATA *peData, |
| Word16 ahFlag[MAX_CHANNELS][MAX_GROUPED_SFB], |
| const Word16 nChannels, |
| const Word16 desiredPe) |
| { |
| Word16 ch, sfb, sfbSubWin; |
| Word16 deltaPe; |
| |
| /* start at highest freq down to 0 */ |
| sfbSubWin = psyOutChannel[0].maxSfbPerGroup; |
| while (peData->pe > desiredPe && sfbSubWin > 0) { |
| |
| sfbSubWin = sfbSubWin - 1; |
| /* loop over all subwindows */ |
| for (sfb=sfbSubWin; sfb<psyOutChannel[0].sfbCnt; |
| sfb+=psyOutChannel[0].sfbPerGroup) { |
| /* loop over all channels */ |
| PE_CHANNEL_DATA* peChan = peData->peChannelData; |
| PSY_OUT_CHANNEL* psyOutCh = psyOutChannel; |
| for (ch=0; ch<nChannels; ch++) { |
| if (ahFlag[ch][sfb] != NO_AH && |
| psyOutCh->sfbMinSnr[sfb] < minSnrLimit) { |
| psyOutCh->sfbMinSnr[sfb] = minSnrLimit; |
| psyOutCh->sfbThreshold[sfb] = |
| L_mpy_ls(psyOutCh->sfbEnergy[sfb], psyOutCh->sfbMinSnr[sfb]); |
| |
| /* calc new pe */ |
| deltaPe = ((peChan->sfbNLines4[sfb] + (peChan->sfbNLines4[sfb] >> 1)) >> 2) - |
| peChan->sfbPe[sfb]; |
| peData->pe = peData->pe + deltaPe; |
| peChan->pe = peChan->pe + deltaPe; |
| } |
| peChan += 1; psyOutCh += 1; |
| } |
| /* stop if enough has been saved */ |
| |
| if (peData->pe <= desiredPe) |
| break; |
| } |
| } |
| } |
| |
| /******************************************************************************** |
| * |
| * function name:allowMoreHoles |
| * description: if the desired pe can not be reached, some more scalefactor bands |
| * have to be quantized to zero |
| * |
| **********************************************************************************/ |
| static void allowMoreHoles(PSY_OUT_CHANNEL psyOutChannel[MAX_CHANNELS], |
| PSY_OUT_ELEMENT *psyOutElement, |
| PE_DATA *peData, |
| Word16 ahFlag[MAX_CHANNELS][MAX_GROUPED_SFB], |
| const AH_PARAM *ahParam, |
| const Word16 nChannels, |
| const Word16 desiredPe) |
| { |
| Word16 ch, sfb; |
| Word16 actPe, shift; |
| |
| actPe = peData->pe; |
| |
| /* for MS allow hole in the channel with less energy */ |
| |
| if (nChannels==2 && |
| psyOutChannel[0].windowSequence==psyOutChannel[1].windowSequence) { |
| PSY_OUT_CHANNEL *psyOutChanL = &psyOutChannel[0]; |
| PSY_OUT_CHANNEL *psyOutChanR = &psyOutChannel[1]; |
| for (sfb=0; sfb<psyOutChanL->sfbCnt; sfb++) { |
| Word32 minEn; |
| |
| if (psyOutElement->toolsInfo.msMask[sfb]) { |
| /* allow hole in side channel ? */ |
| minEn = L_mpy_ls(psyOutChanL->sfbEnergy[sfb], (minSnrLimit * psyOutChanL->sfbMinSnr[sfb]) >> 16); |
| |
| if (ahFlag[1][sfb] != NO_AH && |
| minEn > psyOutChanR->sfbEnergy[sfb]) { |
| ahFlag[1][sfb] = NO_AH; |
| psyOutChanR->sfbThreshold[sfb] = L_add(psyOutChanR->sfbEnergy[sfb], psyOutChanR->sfbEnergy[sfb]); |
| actPe = actPe - peData->peChannelData[1].sfbPe[sfb]; |
| } |
| /* allow hole in mid channel ? */ |
| else { |
| minEn = L_mpy_ls(psyOutChanR->sfbEnergy[sfb], (minSnrLimit * psyOutChanR->sfbMinSnr[sfb]) >> 16); |
| |
| if (ahFlag[0][sfb]!= NO_AH && |
| minEn > psyOutChanL->sfbEnergy[sfb]) { |
| ahFlag[0][sfb] = NO_AH; |
| psyOutChanL->sfbThreshold[sfb] = L_add(psyOutChanL->sfbEnergy[sfb], psyOutChanL->sfbEnergy[sfb]); |
| actPe = actPe - peData->peChannelData[0].sfbPe[sfb]; |
| } |
| } |
| |
| if (actPe < desiredPe) |
| break; |
| } |
| } |
| } |
| |
| /* subsequently erase bands */ |
| if (actPe > desiredPe) { |
| Word16 startSfb[2]; |
| Word32 avgEn, minEn; |
| Word16 ahCnt; |
| Word16 enIdx; |
| Word16 enDiff; |
| Word32 en[4]; |
| Word16 minSfb, maxSfb; |
| Flag done; |
| |
| /* do not go below startSfb */ |
| for (ch=0; ch<nChannels; ch++) { |
| |
| if (psyOutChannel[ch].windowSequence != SHORT_WINDOW) |
| startSfb[ch] = ahParam->startSfbL; |
| else |
| startSfb[ch] = ahParam->startSfbS; |
| } |
| |
| avgEn = 0; |
| minEn = MAX_32; |
| ahCnt = 0; |
| for (ch=0; ch<nChannels; ch++) { |
| PSY_OUT_CHANNEL *psyOutChan = &psyOutChannel[ch]; |
| for (sfb=startSfb[ch]; sfb<psyOutChan->sfbCnt; sfb++) { |
| |
| if ((ahFlag[ch][sfb] != NO_AH) && |
| (psyOutChan->sfbEnergy[sfb] > psyOutChan->sfbThreshold[sfb])) { |
| minEn = min(minEn, psyOutChan->sfbEnergy[sfb]); |
| avgEn = L_add(avgEn, psyOutChan->sfbEnergy[sfb]); |
| ahCnt++; |
| } |
| } |
| } |
| |
| if(ahCnt) { |
| Word32 iahCnt; |
| shift = norm_l(ahCnt); |
| iahCnt = Div_32( 1 << shift, ahCnt << shift ); |
| avgEn = fixmul(avgEn, iahCnt); |
| } |
| |
| enDiff = iLog4(avgEn) - iLog4(minEn); |
| /* calc some energy borders between minEn and avgEn */ |
| for (enIdx=0; enIdx<4; enIdx++) { |
| Word32 enFac; |
| enFac = ((6-(enIdx << 1)) * enDiff); |
| en[enIdx] = fixmul(avgEn, pow2_xy(L_negate(enFac),7*4)); |
| } |
| |
| /* start with lowest energy border at highest sfb */ |
| maxSfb = psyOutChannel[0].sfbCnt - 1; |
| minSfb = startSfb[0]; |
| |
| if (nChannels == 2) { |
| maxSfb = max(maxSfb, (psyOutChannel[1].sfbCnt - 1)); |
| minSfb = min(minSfb, startSfb[1]); |
| } |
| |
| sfb = maxSfb; |
| enIdx = 0; |
| done = 0; |
| while (!done) { |
| |
| for (ch=0; ch<nChannels; ch++) { |
| PSY_OUT_CHANNEL *psyOutChan = &psyOutChannel[ch]; |
| |
| if (sfb>=startSfb[ch] && sfb<psyOutChan->sfbCnt) { |
| /* sfb energy below border ? */ |
| |
| if (ahFlag[ch][sfb] != NO_AH && psyOutChan->sfbEnergy[sfb] < en[enIdx]){ |
| /* allow hole */ |
| ahFlag[ch][sfb] = NO_AH; |
| psyOutChan->sfbThreshold[sfb] = L_add(psyOutChan->sfbEnergy[sfb], psyOutChan->sfbEnergy[sfb]); |
| actPe = actPe - peData->peChannelData[ch].sfbPe[sfb]; |
| } |
| |
| if (actPe < desiredPe) { |
| done = 1; |
| break; |
| } |
| } |
| } |
| sfb = sfb - 1; |
| |
| if (sfb < minSfb) { |
| /* restart with next energy border */ |
| sfb = maxSfb; |
| enIdx = enIdx + 1; |
| |
| if (enIdx - 4 >= 0) |
| done = 1; |
| } |
| } |
| } |
| } |
| |
| /******************************************************************************** |
| * |
| * function name:adaptThresholdsToPe |
| * description: two guesses for the reduction value and one final correction of the |
| * thresholds |
| * |
| **********************************************************************************/ |
| static void adaptThresholdsToPe(PSY_OUT_CHANNEL psyOutChannel[MAX_CHANNELS], |
| PSY_OUT_ELEMENT *psyOutElement, |
| Word16 logSfbEnergy[MAX_CHANNELS][MAX_GROUPED_SFB], |
| PE_DATA *peData, |
| const Word16 nChannels, |
| const Word16 desiredPe, |
| AH_PARAM *ahParam, |
| MINSNR_ADAPT_PARAM *msaParam) |
| { |
| Word16 noRedPe, redPe, redPeNoAH; |
| Word16 constPart, constPartNoAH; |
| Word16 nActiveLines, nActiveLinesNoAH; |
| Word16 desiredPeNoAH; |
| Word32 redVal, avgThrExp; |
| Word32 iter; |
| |
| calcThreshExp(peData->thrExp, psyOutChannel, nChannels); |
| |
| adaptMinSnr(psyOutChannel, logSfbEnergy, msaParam, nChannels); |
| |
| initAvoidHoleFlag(peData->ahFlag, psyOutChannel, psyOutElement, nChannels, ahParam); |
| |
| noRedPe = peData->pe; |
| constPart = peData->constPart; |
| nActiveLines = peData->nActiveLines; |
| |
| /* first guess of reduction value t^0.25 = 2^((a-pen)/4*b) */ |
| avgThrExp = pow2_xy((constPart - noRedPe), (nActiveLines << 2)); |
| |
| /* r1 = 2^((a-per)/4*b) - t^0.25 */ |
| redVal = pow2_xy((constPart - desiredPe), (nActiveLines << 2)) - avgThrExp; |
| |
| /* reduce thresholds */ |
| reduceThresholds(psyOutChannel, peData->ahFlag, peData->thrExp, nChannels, redVal); |
| |
| /* pe after first guess */ |
| calcSfbPe(peData, psyOutChannel, nChannels); |
| redPe = peData->pe; |
| |
| iter = 0; |
| do { |
| /* pe for bands where avoid hole is inactive */ |
| calcPeNoAH(&redPeNoAH, &constPartNoAH, &nActiveLinesNoAH, |
| peData, peData->ahFlag, psyOutChannel, nChannels); |
| |
| desiredPeNoAH = desiredPe -(redPe - redPeNoAH); |
| |
| if (desiredPeNoAH < 0) { |
| desiredPeNoAH = 0; |
| } |
| |
| /* second guess */ |
| |
| if (nActiveLinesNoAH > 0) { |
| |
| avgThrExp = pow2_xy((constPartNoAH - redPeNoAH), (nActiveLinesNoAH << 2)); |
| |
| redVal = (redVal + pow2_xy((constPartNoAH - desiredPeNoAH), (nActiveLinesNoAH << 2))) - avgThrExp; |
| |
| /* reduce thresholds */ |
| reduceThresholds(psyOutChannel, peData->ahFlag, peData->thrExp, nChannels, redVal); |
| } |
| |
| calcSfbPe(peData, psyOutChannel, nChannels); |
| redPe = peData->pe; |
| |
| iter = iter+1; |
| |
| } while ((20 * abs_s(redPe - desiredPe) > desiredPe) && (iter < 2)); |
| |
| |
| if ((100 * redPe < 115 * desiredPe)) { |
| correctThresh(psyOutChannel, peData->ahFlag, peData, peData->thrExp, redVal, |
| nChannels, desiredPe - redPe); |
| } |
| else { |
| Word16 desiredPe105 = (105 * desiredPe) / 100; |
| reduceMinSnr(psyOutChannel, peData, peData->ahFlag, |
| nChannels, desiredPe105); |
| allowMoreHoles(psyOutChannel, psyOutElement, peData, peData->ahFlag, |
| ahParam, nChannels, desiredPe105); |
| } |
| } |
| |
| |
| /***************************************************************************** |
| * |
| * function name: calcBitSave |
| * description: Calculates percentage of bit save, see figure below |
| * returns: |
| * input: parameters and bitres-fullness |
| * output: percentage of bit save |
| * |
| *****************************************************************************/ |
| static Word16 calcBitSave(Word16 fillLevel, |
| const Word16 clipLow, |
| const Word16 clipHigh, |
| const Word16 minBitSave, |
| const Word16 maxBitSave) |
| { |
| Word16 bitsave = 0; |
| |
| fillLevel = max(fillLevel, clipLow); |
| fillLevel = min(fillLevel, clipHigh); |
| |
| if(clipHigh-clipLow) |
| bitsave = (maxBitSave - (((maxBitSave-minBitSave)*(fillLevel-clipLow))/ |
| (clipHigh-clipLow))); |
| |
| return (bitsave); |
| } |
| |
| |
| |
| /***************************************************************************** |
| * |
| * function name: calcBitSpend |
| * description: Calculates percentage of bit spend, see figure below |
| * returns: |
| * input: parameters and bitres-fullness |
| * output: percentage of bit spend |
| * |
| *****************************************************************************/ |
| static Word16 calcBitSpend(Word16 fillLevel, |
| const Word16 clipLow, |
| const Word16 clipHigh, |
| const Word16 minBitSpend, |
| const Word16 maxBitSpend) |
| { |
| Word16 bitspend = 1; |
| |
| fillLevel = max(fillLevel, clipLow); |
| fillLevel = min(fillLevel, clipHigh); |
| |
| if(clipHigh-clipLow) |
| bitspend = (minBitSpend + ((maxBitSpend - minBitSpend)*(fillLevel - clipLow) / |
| (clipHigh-clipLow))); |
| |
| return (bitspend); |
| } |
| |
| |
| /***************************************************************************** |
| * |
| * function name: adjustPeMinMax() |
| * description: adjusts peMin and peMax parameters over time |
| * returns: |
| * input: current pe, peMin, peMax |
| * output: adjusted peMin/peMax |
| * |
| *****************************************************************************/ |
| static void adjustPeMinMax(const Word16 currPe, |
| Word16 *peMin, |
| Word16 *peMax) |
| { |
| Word16 minFacHi, maxFacHi, minFacLo, maxFacLo; |
| Word16 diff; |
| Word16 minDiff = extract_l(currPe / 6); |
| minFacHi = 30; |
| maxFacHi = 100; |
| minFacLo = 14; |
| maxFacLo = 7; |
| |
| diff = currPe - *peMax ; |
| |
| if (diff > 0) { |
| *peMin = *peMin + ((diff * minFacHi) / 100); |
| *peMax = *peMax + ((diff * maxFacHi) / 100); |
| } else { |
| diff = *peMin - currPe; |
| |
| if (diff > 0) { |
| *peMin = *peMin - ((diff * minFacLo) / 100); |
| *peMax = *peMax - ((diff * maxFacLo) / 100); |
| } else { |
| *peMin = *peMin + ((currPe - *peMin) * minFacHi / 100); |
| *peMax = *peMax - ((*peMax - currPe) * maxFacLo / 100); |
| } |
| } |
| |
| |
| if ((*peMax - *peMin) < minDiff) { |
| Word16 partLo, partHi; |
| |
| partLo = max(0, (currPe - *peMin)); |
| partHi = max(0, (*peMax - currPe)); |
| |
| *peMax = currPe + ((partHi * minDiff) / (partLo + partHi)); |
| *peMin = currPe - ((partLo * minDiff) / (partLo + partHi)); |
| *peMin = max(0, *peMin); |
| } |
| } |
| |
| |
| /***************************************************************************** |
| * |
| * function name: BitresCalcBitFac |
| * description: calculates factor of spending bits for one frame |
| * 1.0 : take all frame dynpart bits |
| * >1.0 : take all frame dynpart bits + bitres |
| * <1.0 : put bits in bitreservoir |
| * returns: BitFac*100 |
| * input: bitres-fullness, pe, blockType, parameter-settings |
| * output: |
| * |
| *****************************************************************************/ |
| static Word16 bitresCalcBitFac( const Word16 bitresBits, |
| const Word16 maxBitresBits, |
| const Word16 pe, |
| const Word16 windowSequence, |
| const Word16 avgBits, |
| const Word16 maxBitFac, |
| ADJ_THR_STATE *AdjThr, |
| ATS_ELEMENT *adjThrChan) |
| { |
| BRES_PARAM *bresParam; |
| Word16 pex; |
| Word16 fillLevel; |
| Word16 bitSave, bitSpend, bitresFac; |
| |
| fillLevel = extract_l((100* bitresBits) / maxBitresBits); |
| |
| if (windowSequence != SHORT_WINDOW) |
| bresParam = &(AdjThr->bresParamLong); |
| else |
| bresParam = &(AdjThr->bresParamShort); |
| |
| pex = max(pe, adjThrChan->peMin); |
| pex = min(pex,adjThrChan->peMax); |
| |
| bitSave = calcBitSave(fillLevel, |
| bresParam->clipSaveLow, bresParam->clipSaveHigh, |
| bresParam->minBitSave, bresParam->maxBitSave); |
| |
| bitSpend = calcBitSpend(fillLevel, |
| bresParam->clipSpendLow, bresParam->clipSpendHigh, |
| bresParam->minBitSpend, bresParam->maxBitSpend); |
| |
| if(adjThrChan->peMax != adjThrChan->peMin) |
| bitresFac = (100 - bitSave) + extract_l(((bitSpend + bitSave) * (pex - adjThrChan->peMin)) / |
| (adjThrChan->peMax - adjThrChan->peMin)); |
| else |
| bitresFac = 0x7fff; |
| |
| bitresFac = min(bitresFac, |
| (100-30 + extract_l((100 * bitresBits) / avgBits))); |
| |
| bitresFac = min(bitresFac, maxBitFac); |
| |
| adjustPeMinMax(pe, &adjThrChan->peMin, &adjThrChan->peMax); |
| |
| return bitresFac; |
| } |
| |
| /***************************************************************************** |
| * |
| * function name: AdjThrInit |
| * description: init thresholds parameter |
| * |
| *****************************************************************************/ |
| void AdjThrInit(ADJ_THR_STATE *hAdjThr, |
| const Word32 meanPe, |
| Word32 chBitrate) |
| { |
| ATS_ELEMENT* atsElem = &hAdjThr->adjThrStateElem; |
| MINSNR_ADAPT_PARAM *msaParam = &atsElem->minSnrAdaptParam; |
| |
| /* common for all elements: */ |
| /* parameters for bitres control */ |
| hAdjThr->bresParamLong.clipSaveLow = 20; |
| hAdjThr->bresParamLong.clipSaveHigh = 95; |
| hAdjThr->bresParamLong.minBitSave = -5; |
| hAdjThr->bresParamLong.maxBitSave = 30; |
| hAdjThr->bresParamLong.clipSpendLow = 20; |
| hAdjThr->bresParamLong.clipSpendHigh = 95; |
| hAdjThr->bresParamLong.minBitSpend = -10; |
| hAdjThr->bresParamLong.maxBitSpend = 40; |
| |
| hAdjThr->bresParamShort.clipSaveLow = 20; |
| hAdjThr->bresParamShort.clipSaveHigh = 75; |
| hAdjThr->bresParamShort.minBitSave = 0; |
| hAdjThr->bresParamShort.maxBitSave = 20; |
| hAdjThr->bresParamShort.clipSpendLow = 20; |
| hAdjThr->bresParamShort.clipSpendHigh = 75; |
| hAdjThr->bresParamShort.minBitSpend = -5; |
| hAdjThr->bresParamShort.maxBitSpend = 50; |
| |
| /* specific for each element: */ |
| |
| /* parameters for bitres control */ |
| atsElem->peMin = extract_l(((80*meanPe) / 100)); |
| atsElem->peMax = extract_l(((120*meanPe) / 100)); |
| |
| /* additional pe offset to correct pe2bits for low bitrates */ |
| atsElem->peOffset = 0; |
| if (chBitrate < 32000) { |
| atsElem->peOffset = max(50, (100 - extract_l((100 * chBitrate) / 32000))); |
| } |
| |
| /* avoid hole parameters */ |
| if (chBitrate > 20000) { |
| atsElem->ahParam.modifyMinSnr = TRUE; |
| atsElem->ahParam.startSfbL = 15; |
| atsElem->ahParam.startSfbS = 3; |
| } |
| else { |
| atsElem->ahParam.modifyMinSnr = FALSE; |
| atsElem->ahParam.startSfbL = 0; |
| atsElem->ahParam.startSfbS = 0; |
| } |
| |
| /* minSnr adaptation */ |
| /* maximum reduction of minSnr goes down to minSnr^maxRed */ |
| msaParam->maxRed = 0x20000000; /* *0.25f / |
| /* start adaptation of minSnr for avgEn/sfbEn > startRatio */ |
| msaParam->startRatio = 0x0ccccccd; /* 10 */ |
| /* maximum minSnr reduction to minSnr^maxRed is reached for |
| avgEn/sfbEn >= maxRatio */ |
| msaParam->maxRatio = 0x0020c49c; /* 1000 */ |
| /* helper variables to interpolate minSnr reduction for |
| avgEn/sfbEn between startRatio and maxRatio */ |
| |
| msaParam->redRatioFac = 0xfb333333; /* -0.75/20 */ |
| |
| msaParam->redOffs = 0x30000000; /* msaParam->redRatioFac * 10*log10(msaParam->startRatio) */ |
| |
| |
| /* pe correction */ |
| atsElem->peLast = 0; |
| atsElem->dynBitsLast = 0; |
| atsElem->peCorrectionFactor = 100; /* 1.0 */ |
| |
| } |
| |
| /***************************************************************************** |
| * |
| * function name: calcPeCorrection |
| * description: calculates the desired perceptual entropy factor |
| * It is between 0.85 and 1.15 |
| * |
| *****************************************************************************/ |
| static void calcPeCorrection(Word16 *correctionFac, |
| const Word16 peAct, |
| const Word16 peLast, |
| const Word16 bitsLast) |
| { |
| Word32 peAct100 = 100 * peAct; |
| Word32 peLast100 = 100 * peLast; |
| Word16 peBitsLast = bits2pe(bitsLast); |
| |
| if ((bitsLast > 0) && |
| (peAct100 < (150 * peLast)) && (peAct100 > (70 * peLast)) && |
| ((120 * peBitsLast) > peLast100 ) && (( 65 * peBitsLast) < peLast100)) |
| { |
| Word16 newFac = (100 * peLast) / peBitsLast; |
| /* dead zone */ |
| |
| if (newFac < 100) { |
| newFac = min(((110 * newFac) / 100), 100); |
| newFac = max(newFac, 85); |
| } |
| else { |
| newFac = max(((90 * newFac) / 100), 100); |
| newFac = min(newFac, 115); |
| } |
| |
| if ((newFac > 100 && *correctionFac < 100) || |
| (newFac < 100 && *correctionFac > 100)) { |
| *correctionFac = 100; |
| } |
| /* faster adaptation towards 1.0, slower in the other direction */ |
| |
| if ((*correctionFac < 100 && newFac < *correctionFac) || |
| (*correctionFac > 100 && newFac > *correctionFac)) |
| *correctionFac = (85 * *correctionFac + 15 * newFac) / 100; |
| else |
| *correctionFac = (70 * *correctionFac + 30 * newFac) / 100; |
| *correctionFac = min(*correctionFac, 115); |
| *correctionFac = max(*correctionFac, 85); |
| } |
| else { |
| *correctionFac = 100; |
| } |
| } |
| |
| /******************************************************************************** |
| * |
| * function name: AdjustThresholds |
| * description: Adjust thresholds to the desired bitrate |
| * |
| **********************************************************************************/ |
| void AdjustThresholds(ADJ_THR_STATE *adjThrState, |
| ATS_ELEMENT *AdjThrStateElement, |
| PSY_OUT_CHANNEL psyOutChannel[MAX_CHANNELS], |
| PSY_OUT_ELEMENT *psyOutElement, |
| Word16 *chBitDistribution, |
| Word16 logSfbEnergy[MAX_CHANNELS][MAX_GROUPED_SFB], |
| Word16 sfbNRelevantLines[MAX_CHANNELS][MAX_GROUPED_SFB], |
| QC_OUT_ELEMENT *qcOE, |
| ELEMENT_BITS *elBits, |
| const Word16 nChannels, |
| const Word16 maxBitFac) |
| { |
| PE_DATA peData; |
| Word16 noRedPe, grantedPe, grantedPeCorr; |
| Word16 curWindowSequence; |
| Word16 bitFactor; |
| Word16 avgBits = (elBits->averageBits - (qcOE->staticBitsUsed + qcOE->ancBitsUsed)); |
| Word16 bitresBits = elBits->bitResLevel; |
| Word16 maxBitresBits = elBits->maxBits; |
| Word16 sideInfoBits = (qcOE->staticBitsUsed + qcOE->ancBitsUsed); |
| Word16 ch; |
| |
| prepareSfbPe(&peData, psyOutChannel, logSfbEnergy, sfbNRelevantLines, nChannels, AdjThrStateElement->peOffset); |
| |
| /* pe without reduction */ |
| calcSfbPe(&peData, psyOutChannel, nChannels); |
| noRedPe = peData.pe; |
| |
| |
| curWindowSequence = LONG_WINDOW; |
| |
| if (nChannels == 2) { |
| |
| if ((psyOutChannel[0].windowSequence == SHORT_WINDOW) || |
| (psyOutChannel[1].windowSequence == SHORT_WINDOW)) { |
| curWindowSequence = SHORT_WINDOW; |
| } |
| } |
| else { |
| curWindowSequence = psyOutChannel[0].windowSequence; |
| } |
| |
| |
| /* bit factor */ |
| bitFactor = bitresCalcBitFac(bitresBits, maxBitresBits, noRedPe+5*sideInfoBits, |
| curWindowSequence, avgBits, maxBitFac, |
| adjThrState, |
| AdjThrStateElement); |
| |
| /* desired pe */ |
| grantedPe = ((bitFactor * bits2pe(avgBits)) / 100); |
| |
| /* correction of pe value */ |
| calcPeCorrection(&(AdjThrStateElement->peCorrectionFactor), |
| min(grantedPe, noRedPe), |
| AdjThrStateElement->peLast, |
| AdjThrStateElement->dynBitsLast); |
| grantedPeCorr = (grantedPe * AdjThrStateElement->peCorrectionFactor) / 100; |
| |
| |
| if (grantedPeCorr < noRedPe && noRedPe > peData.offset) { |
| /* calc threshold necessary for desired pe */ |
| adaptThresholdsToPe(psyOutChannel, |
| psyOutElement, |
| logSfbEnergy, |
| &peData, |
| nChannels, |
| grantedPeCorr, |
| &AdjThrStateElement->ahParam, |
| &AdjThrStateElement->minSnrAdaptParam); |
| } |
| |
| /* calculate relative distribution */ |
| for (ch=0; ch<nChannels; ch++) { |
| Word16 peOffsDiff = peData.pe - peData.offset; |
| chBitDistribution[ch] = 200; |
| |
| if (peOffsDiff > 0) { |
| Word32 temp = 1000 - (nChannels * 200); |
| chBitDistribution[ch] = chBitDistribution[ch] + |
| (temp * peData.peChannelData[ch].pe) / peOffsDiff; |
| } |
| } |
| |
| /* store pe */ |
| qcOE->pe = noRedPe; |
| |
| /* update last pe */ |
| AdjThrStateElement->peLast = grantedPe; |
| } |
| |
| /******************************************************************************** |
| * |
| * function name: AdjThrUpdate |
| * description: save dynBitsUsed for correction of bits2pe relation |
| * |
| **********************************************************************************/ |
| void AdjThrUpdate(ATS_ELEMENT *AdjThrStateElement, |
| const Word16 dynBitsUsed) |
| { |
| AdjThrStateElement->dynBitsLast = dynBitsUsed; |
| } |
| |
| |