| /* |
| * Copyright (C) 2007 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.os; |
| |
| import android.Manifest.permission; |
| import android.annotation.CallbackExecutor; |
| import android.annotation.IntDef; |
| import android.annotation.NonNull; |
| import android.annotation.RequiresPermission; |
| import android.annotation.SdkConstant; |
| import android.annotation.SystemApi; |
| import android.annotation.SystemService; |
| import android.annotation.TestApi; |
| import android.annotation.UnsupportedAppUsage; |
| import android.content.Context; |
| import android.service.dreams.Sandman; |
| import android.util.ArrayMap; |
| import android.util.Log; |
| import android.util.proto.ProtoOutputStream; |
| |
| import com.android.internal.util.Preconditions; |
| |
| import java.lang.annotation.Retention; |
| import java.lang.annotation.RetentionPolicy; |
| import java.util.concurrent.Executor; |
| |
| /** |
| * This class gives you control of the power state of the device. |
| * |
| * <p> |
| * <b>Device battery life will be significantly affected by the use of this API.</b> |
| * Do not acquire {@link WakeLock}s unless you really need them, use the minimum levels |
| * possible, and be sure to release them as soon as possible. |
| * </p><p> |
| * The primary API you'll use is {@link #newWakeLock(int, String) newWakeLock()}. |
| * This will create a {@link PowerManager.WakeLock} object. You can then use methods |
| * on the wake lock object to control the power state of the device. |
| * </p><p> |
| * In practice it's quite simple: |
| * {@samplecode |
| * PowerManager pm = (PowerManager) getSystemService(Context.POWER_SERVICE); |
| * PowerManager.WakeLock wl = pm.newWakeLock(PowerManager.SCREEN_DIM_WAKE_LOCK, "My Tag"); |
| * wl.acquire(); |
| * ..screen will stay on during this section.. |
| * wl.release(); |
| * } |
| * </p><p> |
| * The following wake lock levels are defined, with varying effects on system power. |
| * <i>These levels are mutually exclusive - you may only specify one of them.</i> |
| * |
| * <table> |
| * <tr><th>Flag Value</th> |
| * <th>CPU</th> <th>Screen</th> <th>Keyboard</th></tr> |
| * |
| * <tr><td>{@link #PARTIAL_WAKE_LOCK}</td> |
| * <td>On*</td> <td>Off</td> <td>Off</td> |
| * </tr> |
| * |
| * <tr><td>{@link #SCREEN_DIM_WAKE_LOCK}</td> |
| * <td>On</td> <td>Dim</td> <td>Off</td> |
| * </tr> |
| * |
| * <tr><td>{@link #SCREEN_BRIGHT_WAKE_LOCK}</td> |
| * <td>On</td> <td>Bright</td> <td>Off</td> |
| * </tr> |
| * |
| * <tr><td>{@link #FULL_WAKE_LOCK}</td> |
| * <td>On</td> <td>Bright</td> <td>Bright</td> |
| * </tr> |
| * </table> |
| * </p><p> |
| * *<i>If you hold a partial wake lock, the CPU will continue to run, regardless of any |
| * display timeouts or the state of the screen and even after the user presses the power button. |
| * In all other wake locks, the CPU will run, but the user can still put the device to sleep |
| * using the power button.</i> |
| * </p><p> |
| * In addition, you can add two more flags, which affect behavior of the screen only. |
| * <i>These flags have no effect when combined with a {@link #PARTIAL_WAKE_LOCK}.</i></p> |
| * |
| * <table> |
| * <tr><th>Flag Value</th> <th>Description</th></tr> |
| * |
| * <tr><td>{@link #ACQUIRE_CAUSES_WAKEUP}</td> |
| * <td>Normal wake locks don't actually turn on the illumination. Instead, they cause |
| * the illumination to remain on once it turns on (e.g. from user activity). This flag |
| * will force the screen and/or keyboard to turn on immediately, when the WakeLock is |
| * acquired. A typical use would be for notifications which are important for the user to |
| * see immediately.</td> |
| * </tr> |
| * |
| * <tr><td>{@link #ON_AFTER_RELEASE}</td> |
| * <td>If this flag is set, the user activity timer will be reset when the WakeLock is |
| * released, causing the illumination to remain on a bit longer. This can be used to |
| * reduce flicker if you are cycling between wake lock conditions.</td> |
| * </tr> |
| * </table> |
| * <p> |
| * Any application using a WakeLock must request the {@code android.permission.WAKE_LOCK} |
| * permission in an {@code <uses-permission>} element of the application's manifest. |
| * </p> |
| */ |
| @SystemService(Context.POWER_SERVICE) |
| public final class PowerManager { |
| private static final String TAG = "PowerManager"; |
| |
| /* NOTE: Wake lock levels were previously defined as a bit field, except that only a few |
| * combinations were actually supported so the bit field was removed. This explains |
| * why the numbering scheme is so odd. If adding a new wake lock level, any unused |
| * value (in frameworks/base/core/proto/android/os/enums.proto) can be used. |
| */ |
| |
| /** |
| * Wake lock level: Ensures that the CPU is running; the screen and keyboard |
| * backlight will be allowed to go off. |
| * <p> |
| * If the user presses the power button, then the screen will be turned off |
| * but the CPU will be kept on until all partial wake locks have been released. |
| * </p> |
| */ |
| public static final int PARTIAL_WAKE_LOCK = OsProtoEnums.PARTIAL_WAKE_LOCK; // 0x00000001 |
| |
| /** |
| * Wake lock level: Ensures that the screen is on (but may be dimmed); |
| * the keyboard backlight will be allowed to go off. |
| * <p> |
| * If the user presses the power button, then the {@link #SCREEN_DIM_WAKE_LOCK} will be |
| * implicitly released by the system, causing both the screen and the CPU to be turned off. |
| * Contrast with {@link #PARTIAL_WAKE_LOCK}. |
| * </p> |
| * |
| * @deprecated Most applications should use |
| * {@link android.view.WindowManager.LayoutParams#FLAG_KEEP_SCREEN_ON} instead |
| * of this type of wake lock, as it will be correctly managed by the platform |
| * as the user moves between applications and doesn't require a special permission. |
| */ |
| @Deprecated |
| public static final int SCREEN_DIM_WAKE_LOCK = OsProtoEnums.SCREEN_DIM_WAKE_LOCK; // 0x00000006 |
| |
| /** |
| * Wake lock level: Ensures that the screen is on at full brightness; |
| * the keyboard backlight will be allowed to go off. |
| * <p> |
| * If the user presses the power button, then the {@link #SCREEN_BRIGHT_WAKE_LOCK} will be |
| * implicitly released by the system, causing both the screen and the CPU to be turned off. |
| * Contrast with {@link #PARTIAL_WAKE_LOCK}. |
| * </p> |
| * |
| * @deprecated Most applications should use |
| * {@link android.view.WindowManager.LayoutParams#FLAG_KEEP_SCREEN_ON} instead |
| * of this type of wake lock, as it will be correctly managed by the platform |
| * as the user moves between applications and doesn't require a special permission. |
| */ |
| @Deprecated |
| public static final int SCREEN_BRIGHT_WAKE_LOCK = |
| OsProtoEnums.SCREEN_BRIGHT_WAKE_LOCK; // 0x0000000a |
| |
| /** |
| * Wake lock level: Ensures that the screen and keyboard backlight are on at |
| * full brightness. |
| * <p> |
| * If the user presses the power button, then the {@link #FULL_WAKE_LOCK} will be |
| * implicitly released by the system, causing both the screen and the CPU to be turned off. |
| * Contrast with {@link #PARTIAL_WAKE_LOCK}. |
| * </p> |
| * |
| * @deprecated Most applications should use |
| * {@link android.view.WindowManager.LayoutParams#FLAG_KEEP_SCREEN_ON} instead |
| * of this type of wake lock, as it will be correctly managed by the platform |
| * as the user moves between applications and doesn't require a special permission. |
| */ |
| @Deprecated |
| public static final int FULL_WAKE_LOCK = OsProtoEnums.FULL_WAKE_LOCK; // 0x0000001a |
| |
| /** |
| * Wake lock level: Turns the screen off when the proximity sensor activates. |
| * <p> |
| * If the proximity sensor detects that an object is nearby, the screen turns off |
| * immediately. Shortly after the object moves away, the screen turns on again. |
| * </p><p> |
| * A proximity wake lock does not prevent the device from falling asleep |
| * unlike {@link #FULL_WAKE_LOCK}, {@link #SCREEN_BRIGHT_WAKE_LOCK} and |
| * {@link #SCREEN_DIM_WAKE_LOCK}. If there is no user activity and no other |
| * wake locks are held, then the device will fall asleep (and lock) as usual. |
| * However, the device will not fall asleep while the screen has been turned off |
| * by the proximity sensor because it effectively counts as ongoing user activity. |
| * </p><p> |
| * Since not all devices have proximity sensors, use {@link #isWakeLockLevelSupported} |
| * to determine whether this wake lock level is supported. |
| * </p><p> |
| * Cannot be used with {@link #ACQUIRE_CAUSES_WAKEUP}. |
| * </p> |
| */ |
| public static final int PROXIMITY_SCREEN_OFF_WAKE_LOCK = |
| OsProtoEnums.PROXIMITY_SCREEN_OFF_WAKE_LOCK; // 0x00000020 |
| |
| /** |
| * Wake lock level: Put the screen in a low power state and allow the CPU to suspend |
| * if no other wake locks are held. |
| * <p> |
| * This is used by the dream manager to implement doze mode. It currently |
| * has no effect unless the power manager is in the dozing state. |
| * </p><p> |
| * Requires the {@link android.Manifest.permission#DEVICE_POWER} permission. |
| * </p> |
| * |
| * {@hide} |
| */ |
| public static final int DOZE_WAKE_LOCK = OsProtoEnums.DOZE_WAKE_LOCK; // 0x00000040 |
| |
| /** |
| * Wake lock level: Keep the device awake enough to allow drawing to occur. |
| * <p> |
| * This is used by the window manager to allow applications to draw while the |
| * system is dozing. It currently has no effect unless the power manager is in |
| * the dozing state. |
| * </p><p> |
| * Requires the {@link android.Manifest.permission#DEVICE_POWER} permission. |
| * </p> |
| * |
| * {@hide} |
| */ |
| public static final int DRAW_WAKE_LOCK = OsProtoEnums.DRAW_WAKE_LOCK; // 0x00000080 |
| |
| /** |
| * Mask for the wake lock level component of a combined wake lock level and flags integer. |
| * |
| * @hide |
| */ |
| public static final int WAKE_LOCK_LEVEL_MASK = 0x0000ffff; |
| |
| /** |
| * Wake lock flag: Turn the screen on when the wake lock is acquired. |
| * <p> |
| * Normally wake locks don't actually wake the device, they just cause |
| * the screen to remain on once it's already on. Think of the video player |
| * application as the normal behavior. Notifications that pop up and want |
| * the device to be on are the exception; use this flag to be like them. |
| * </p><p> |
| * Cannot be used with {@link #PARTIAL_WAKE_LOCK}. |
| * </p> |
| */ |
| public static final int ACQUIRE_CAUSES_WAKEUP = 0x10000000; |
| |
| /** |
| * Wake lock flag: When this wake lock is released, poke the user activity timer |
| * so the screen stays on for a little longer. |
| * <p> |
| * Will not turn the screen on if it is not already on. |
| * See {@link #ACQUIRE_CAUSES_WAKEUP} if you want that. |
| * </p><p> |
| * Cannot be used with {@link #PARTIAL_WAKE_LOCK}. |
| * </p> |
| */ |
| public static final int ON_AFTER_RELEASE = 0x20000000; |
| |
| /** |
| * Wake lock flag: This wake lock is not important for logging events. If a later |
| * wake lock is acquired that is important, it will be considered the one to log. |
| * @hide |
| */ |
| public static final int UNIMPORTANT_FOR_LOGGING = 0x40000000; |
| |
| /** |
| * Flag for {@link WakeLock#release WakeLock.release(int)}: Defer releasing a |
| * {@link #PROXIMITY_SCREEN_OFF_WAKE_LOCK} wake lock until the proximity sensor |
| * indicates that an object is not in close proximity. |
| */ |
| public static final int RELEASE_FLAG_WAIT_FOR_NO_PROXIMITY = 1 << 0; |
| |
| /** |
| * Flag for {@link WakeLock#release(int)} when called due to timeout. |
| * @hide |
| */ |
| public static final int RELEASE_FLAG_TIMEOUT = 1 << 16; |
| |
| /** |
| * Brightness value for fully on. |
| * @hide |
| */ |
| @UnsupportedAppUsage |
| public static final int BRIGHTNESS_ON = 255; |
| |
| /** |
| * Brightness value for fully off. |
| * @hide |
| */ |
| public static final int BRIGHTNESS_OFF = 0; |
| |
| /** |
| * Brightness value for default policy handling by the system. |
| * @hide |
| */ |
| public static final int BRIGHTNESS_DEFAULT = -1; |
| |
| // Note: Be sure to update android.os.BatteryStats and PowerManager.h |
| // if adding or modifying user activity event constants. |
| |
| /** |
| * User activity event type: Unspecified event type. |
| * @hide |
| */ |
| @SystemApi |
| public static final int USER_ACTIVITY_EVENT_OTHER = 0; |
| |
| /** |
| * User activity event type: Button or key pressed or released. |
| * @hide |
| */ |
| @SystemApi |
| public static final int USER_ACTIVITY_EVENT_BUTTON = 1; |
| |
| /** |
| * User activity event type: Touch down, move or up. |
| * @hide |
| */ |
| @SystemApi |
| public static final int USER_ACTIVITY_EVENT_TOUCH = 2; |
| |
| /** |
| * User activity event type: Accessibility taking action on behalf of user. |
| * @hide |
| */ |
| @SystemApi |
| public static final int USER_ACTIVITY_EVENT_ACCESSIBILITY = 3; |
| |
| /** |
| * User activity event type: {@link android.service.attention.AttentionService} taking action |
| * on behalf of user. |
| * @hide |
| */ |
| public static final int USER_ACTIVITY_EVENT_ATTENTION = 4; |
| |
| /** |
| * User activity flag: If already dimmed, extend the dim timeout |
| * but do not brighten. This flag is useful for keeping the screen on |
| * a little longer without causing a visible change such as when |
| * the power key is pressed. |
| * @hide |
| */ |
| @SystemApi |
| public static final int USER_ACTIVITY_FLAG_NO_CHANGE_LIGHTS = 1 << 0; |
| |
| /** |
| * User activity flag: Note the user activity as usual but do not |
| * reset the user activity timeout. This flag is useful for applying |
| * user activity power hints when interacting with the device indirectly |
| * on a secondary screen while allowing the primary screen to go to sleep. |
| * @hide |
| */ |
| @SystemApi |
| public static final int USER_ACTIVITY_FLAG_INDIRECT = 1 << 1; |
| |
| /** |
| * @hide |
| */ |
| public static final int GO_TO_SLEEP_REASON_MIN = 0; |
| |
| /** |
| * Go to sleep reason code: Going to sleep due by application request. |
| * @hide |
| */ |
| public static final int GO_TO_SLEEP_REASON_APPLICATION = GO_TO_SLEEP_REASON_MIN; |
| |
| /** |
| * Go to sleep reason code: Going to sleep due by request of the |
| * device administration policy. |
| * @hide |
| */ |
| public static final int GO_TO_SLEEP_REASON_DEVICE_ADMIN = 1; |
| |
| /** |
| * Go to sleep reason code: Going to sleep due to a screen timeout. |
| * @hide |
| */ |
| @UnsupportedAppUsage |
| public static final int GO_TO_SLEEP_REASON_TIMEOUT = 2; |
| |
| /** |
| * Go to sleep reason code: Going to sleep due to the lid switch being closed. |
| * @hide |
| */ |
| public static final int GO_TO_SLEEP_REASON_LID_SWITCH = 3; |
| |
| /** |
| * Go to sleep reason code: Going to sleep due to the power button being pressed. |
| * @hide |
| */ |
| public static final int GO_TO_SLEEP_REASON_POWER_BUTTON = 4; |
| |
| /** |
| * Go to sleep reason code: Going to sleep due to HDMI. |
| * @hide |
| */ |
| public static final int GO_TO_SLEEP_REASON_HDMI = 5; |
| |
| /** |
| * Go to sleep reason code: Going to sleep due to the sleep button being pressed. |
| * @hide |
| */ |
| public static final int GO_TO_SLEEP_REASON_SLEEP_BUTTON = 6; |
| |
| /** |
| * Go to sleep reason code: Going to sleep by request of an accessibility service |
| * @hide |
| */ |
| public static final int GO_TO_SLEEP_REASON_ACCESSIBILITY = 7; |
| |
| /** |
| * Go to sleep reason code: Going to sleep due to force-suspend. |
| * @hide |
| */ |
| public static final int GO_TO_SLEEP_REASON_FORCE_SUSPEND = 8; |
| |
| /** |
| * @hide |
| */ |
| public static final int GO_TO_SLEEP_REASON_MAX = GO_TO_SLEEP_REASON_FORCE_SUSPEND; |
| |
| /** |
| * @hide |
| */ |
| public static String sleepReasonToString(int sleepReason) { |
| switch (sleepReason) { |
| case GO_TO_SLEEP_REASON_APPLICATION: return "application"; |
| case GO_TO_SLEEP_REASON_DEVICE_ADMIN: return "device_admin"; |
| case GO_TO_SLEEP_REASON_TIMEOUT: return "timeout"; |
| case GO_TO_SLEEP_REASON_LID_SWITCH: return "lid_switch"; |
| case GO_TO_SLEEP_REASON_POWER_BUTTON: return "power_button"; |
| case GO_TO_SLEEP_REASON_HDMI: return "hdmi"; |
| case GO_TO_SLEEP_REASON_SLEEP_BUTTON: return "sleep_button"; |
| case GO_TO_SLEEP_REASON_ACCESSIBILITY: return "accessibility"; |
| case GO_TO_SLEEP_REASON_FORCE_SUSPEND: return "force_suspend"; |
| default: return Integer.toString(sleepReason); |
| } |
| } |
| |
| /** |
| * Go to sleep flag: Skip dozing state and directly go to full sleep. |
| * @hide |
| */ |
| public static final int GO_TO_SLEEP_FLAG_NO_DOZE = 1 << 0; |
| |
| /** |
| * @hide |
| */ |
| @IntDef(prefix = { "WAKE_REASON_" }, value = { |
| WAKE_REASON_UNKNOWN, |
| WAKE_REASON_POWER_BUTTON, |
| WAKE_REASON_APPLICATION, |
| WAKE_REASON_PLUGGED_IN, |
| WAKE_REASON_GESTURE, |
| WAKE_REASON_CAMERA_LAUNCH, |
| WAKE_REASON_WAKE_KEY, |
| WAKE_REASON_WAKE_MOTION, |
| WAKE_REASON_HDMI, |
| }) |
| @Retention(RetentionPolicy.SOURCE) |
| public @interface WakeReason{} |
| |
| /** |
| * Wake up reason code: Waking for an unknown reason. |
| * @hide |
| */ |
| public static final int WAKE_REASON_UNKNOWN = 0; |
| |
| /** |
| * Wake up reason code: Waking up due to power button press. |
| * @hide |
| */ |
| public static final int WAKE_REASON_POWER_BUTTON = 1; |
| |
| /** |
| * Wake up reason code: Waking up because an application requested it. |
| * @hide |
| */ |
| public static final int WAKE_REASON_APPLICATION = 2; |
| |
| /** |
| * Wake up reason code: Waking up due to being plugged in or docked on a wireless charger. |
| * @hide |
| */ |
| public static final int WAKE_REASON_PLUGGED_IN = 3; |
| |
| /** |
| * Wake up reason code: Waking up due to a user performed gesture (e.g. douple tapping on the |
| * screen). |
| * @hide |
| */ |
| public static final int WAKE_REASON_GESTURE = 4; |
| |
| /** |
| * Wake up reason code: Waking up due to the camera being launched. |
| * @hide |
| */ |
| public static final int WAKE_REASON_CAMERA_LAUNCH = 5; |
| |
| /** |
| * Wake up reason code: Waking up because a wake key other than power was pressed. |
| * @hide |
| */ |
| public static final int WAKE_REASON_WAKE_KEY = 6; |
| |
| /** |
| * Wake up reason code: Waking up because a wake motion was performed. |
| * |
| * For example, a trackball that was set to wake the device up was spun. |
| * @hide |
| */ |
| public static final int WAKE_REASON_WAKE_MOTION = 7; |
| |
| /** |
| * Wake up reason code: Waking due to HDMI. |
| * @hide |
| */ |
| public static final int WAKE_REASON_HDMI = 8; |
| |
| /** |
| * Wake up reason code: Waking due to the lid being opened. |
| * @hide |
| */ |
| public static final int WAKE_REASON_LID = 9; |
| |
| /** |
| * Convert the wake reason to a string for debugging purposes. |
| * @hide |
| */ |
| public static String wakeReasonToString(@WakeReason int wakeReason) { |
| switch (wakeReason) { |
| case WAKE_REASON_UNKNOWN: return "WAKE_REASON_UNKNOWN"; |
| case WAKE_REASON_POWER_BUTTON: return "WAKE_REASON_POWER_BUTTON"; |
| case WAKE_REASON_APPLICATION: return "WAKE_REASON_APPLICATION"; |
| case WAKE_REASON_PLUGGED_IN: return "WAKE_REASON_PLUGGED_IN"; |
| case WAKE_REASON_GESTURE: return "WAKE_REASON_GESTURE"; |
| case WAKE_REASON_CAMERA_LAUNCH: return "WAKE_REASON_CAMERA_LAUNCH"; |
| case WAKE_REASON_WAKE_KEY: return "WAKE_REASON_WAKE_KEY"; |
| case WAKE_REASON_WAKE_MOTION: return "WAKE_REASON_WAKE_MOTION"; |
| case WAKE_REASON_HDMI: return "WAKE_REASON_HDMI"; |
| case WAKE_REASON_LID: return "WAKE_REASON_LID"; |
| default: return Integer.toString(wakeReason); |
| } |
| } |
| |
| /** |
| * The value to pass as the 'reason' argument to reboot() to reboot into |
| * recovery mode for tasks other than applying system updates, such as |
| * doing factory resets. |
| * <p> |
| * Requires the {@link android.Manifest.permission#RECOVERY} |
| * permission (in addition to |
| * {@link android.Manifest.permission#REBOOT}). |
| * </p> |
| * @hide |
| */ |
| public static final String REBOOT_RECOVERY = "recovery"; |
| |
| /** |
| * The value to pass as the 'reason' argument to reboot() to reboot into |
| * recovery mode for applying system updates. |
| * <p> |
| * Requires the {@link android.Manifest.permission#RECOVERY} |
| * permission (in addition to |
| * {@link android.Manifest.permission#REBOOT}). |
| * </p> |
| * @hide |
| */ |
| public static final String REBOOT_RECOVERY_UPDATE = "recovery-update"; |
| |
| /** |
| * The value to pass as the 'reason' argument to reboot() when device owner requests a reboot on |
| * the device. |
| * @hide |
| */ |
| public static final String REBOOT_REQUESTED_BY_DEVICE_OWNER = "deviceowner"; |
| |
| /** |
| * The 'reason' value used when rebooting in safe mode |
| * @hide |
| */ |
| public static final String REBOOT_SAFE_MODE = "safemode"; |
| |
| /** |
| * The 'reason' value used when rebooting the device without turning on the screen. |
| * @hide |
| */ |
| public static final String REBOOT_QUIESCENT = "quiescent"; |
| |
| /** |
| * The value to pass as the 'reason' argument to android_reboot(). |
| * @hide |
| */ |
| public static final String SHUTDOWN_USER_REQUESTED = "userrequested"; |
| |
| /** |
| * The value to pass as the 'reason' argument to android_reboot() when battery temperature |
| * is too high. |
| * @hide |
| */ |
| public static final String SHUTDOWN_BATTERY_THERMAL_STATE = "thermal,battery"; |
| |
| /** |
| * The value to pass as the 'reason' argument to android_reboot() when device temperature |
| * is too high. |
| * @hide |
| */ |
| public static final String SHUTDOWN_THERMAL_STATE = "thermal"; |
| |
| /** |
| * The value to pass as the 'reason' argument to android_reboot() when device is running |
| * critically low on battery. |
| * @hide |
| */ |
| public static final String SHUTDOWN_LOW_BATTERY = "battery"; |
| |
| /** |
| * @hide |
| */ |
| @Retention(RetentionPolicy.SOURCE) |
| @IntDef(prefix = { "SHUTDOWN_REASON_" }, value = { |
| SHUTDOWN_REASON_UNKNOWN, |
| SHUTDOWN_REASON_SHUTDOWN, |
| SHUTDOWN_REASON_REBOOT, |
| SHUTDOWN_REASON_USER_REQUESTED, |
| SHUTDOWN_REASON_THERMAL_SHUTDOWN, |
| SHUTDOWN_REASON_LOW_BATTERY, |
| SHUTDOWN_REASON_BATTERY_THERMAL |
| }) |
| public @interface ShutdownReason {} |
| |
| /** |
| * constant for shutdown reason being unknown. |
| * @hide |
| */ |
| public static final int SHUTDOWN_REASON_UNKNOWN = 0; |
| |
| /** |
| * constant for shutdown reason being normal shutdown. |
| * @hide |
| */ |
| public static final int SHUTDOWN_REASON_SHUTDOWN = 1; |
| |
| /** |
| * constant for shutdown reason being reboot. |
| * @hide |
| */ |
| public static final int SHUTDOWN_REASON_REBOOT = 2; |
| |
| /** |
| * constant for shutdown reason being user requested. |
| * @hide |
| */ |
| public static final int SHUTDOWN_REASON_USER_REQUESTED = 3; |
| |
| /** |
| * constant for shutdown reason being overheating. |
| * @hide |
| */ |
| public static final int SHUTDOWN_REASON_THERMAL_SHUTDOWN = 4; |
| |
| /** |
| * constant for shutdown reason being low battery. |
| * @hide |
| */ |
| public static final int SHUTDOWN_REASON_LOW_BATTERY = 5; |
| |
| /** |
| * constant for shutdown reason being critical battery thermal state. |
| * @hide |
| */ |
| public static final int SHUTDOWN_REASON_BATTERY_THERMAL = 6; |
| |
| /** |
| * @hide |
| */ |
| @Retention(RetentionPolicy.SOURCE) |
| @IntDef({ServiceType.LOCATION, |
| ServiceType.VIBRATION, |
| ServiceType.ANIMATION, |
| ServiceType.FULL_BACKUP, |
| ServiceType.KEYVALUE_BACKUP, |
| ServiceType.NETWORK_FIREWALL, |
| ServiceType.SCREEN_BRIGHTNESS, |
| ServiceType.SOUND, |
| ServiceType.BATTERY_STATS, |
| ServiceType.DATA_SAVER, |
| ServiceType.FORCE_ALL_APPS_STANDBY, |
| ServiceType.FORCE_BACKGROUND_CHECK, |
| ServiceType.OPTIONAL_SENSORS, |
| ServiceType.AOD, |
| ServiceType.QUICK_DOZE, |
| ServiceType.NIGHT_MODE, |
| }) |
| public @interface ServiceType { |
| int NULL = 0; |
| int LOCATION = 1; |
| int VIBRATION = 2; |
| int ANIMATION = 3; |
| int FULL_BACKUP = 4; |
| int KEYVALUE_BACKUP = 5; |
| int NETWORK_FIREWALL = 6; |
| int SCREEN_BRIGHTNESS = 7; |
| int SOUND = 8; |
| int BATTERY_STATS = 9; |
| int DATA_SAVER = 10; |
| int AOD = 14; |
| |
| /** |
| * Whether to enable force-app-standby on all apps or not. |
| */ |
| int FORCE_ALL_APPS_STANDBY = 11; |
| |
| /** |
| * Whether to enable background check on all apps or not. |
| */ |
| int FORCE_BACKGROUND_CHECK = 12; |
| |
| /** |
| * Whether to disable non-essential sensors. (e.g. edge sensors.) |
| */ |
| int OPTIONAL_SENSORS = 13; |
| |
| /** |
| * Whether to go into Deep Doze as soon as the screen turns off or not. |
| */ |
| int QUICK_DOZE = 15; |
| |
| /** |
| * Whether to enable night mode when battery saver is enabled. |
| */ |
| int NIGHT_MODE = 16; |
| } |
| |
| /** |
| * Either the location providers shouldn't be affected by battery saver, |
| * or battery saver is off. |
| */ |
| public static final int LOCATION_MODE_NO_CHANGE = 0; |
| |
| /** |
| * In this mode, the GPS based location provider should be disabled when battery saver is on and |
| * the device is non-interactive. |
| */ |
| public static final int LOCATION_MODE_GPS_DISABLED_WHEN_SCREEN_OFF = 1; |
| |
| /** |
| * All location providers should be disabled when battery saver is on and |
| * the device is non-interactive. |
| */ |
| public static final int LOCATION_MODE_ALL_DISABLED_WHEN_SCREEN_OFF = 2; |
| |
| /** |
| * In this mode, all the location providers will be kept available, but location fixes |
| * should only be provided to foreground apps. |
| */ |
| public static final int LOCATION_MODE_FOREGROUND_ONLY = 3; |
| |
| /** |
| * In this mode, location will not be turned off, but LocationManager will throttle all |
| * requests to providers when the device is non-interactive. |
| */ |
| public static final int LOCATION_MODE_THROTTLE_REQUESTS_WHEN_SCREEN_OFF = 4; |
| |
| static final int MIN_LOCATION_MODE = LOCATION_MODE_NO_CHANGE; |
| static final int MAX_LOCATION_MODE = LOCATION_MODE_THROTTLE_REQUESTS_WHEN_SCREEN_OFF; |
| |
| /** |
| * @hide |
| */ |
| @Retention(RetentionPolicy.SOURCE) |
| @IntDef(prefix = {"LOCATION_MODE_"}, value = { |
| LOCATION_MODE_NO_CHANGE, |
| LOCATION_MODE_GPS_DISABLED_WHEN_SCREEN_OFF, |
| LOCATION_MODE_ALL_DISABLED_WHEN_SCREEN_OFF, |
| LOCATION_MODE_FOREGROUND_ONLY, |
| LOCATION_MODE_THROTTLE_REQUESTS_WHEN_SCREEN_OFF, |
| }) |
| public @interface LocationPowerSaveMode {} |
| |
| /** @hide */ |
| public static String locationPowerSaveModeToString(@LocationPowerSaveMode int mode) { |
| switch (mode) { |
| case LOCATION_MODE_NO_CHANGE: |
| return "NO_CHANGE"; |
| case LOCATION_MODE_GPS_DISABLED_WHEN_SCREEN_OFF: |
| return "GPS_DISABLED_WHEN_SCREEN_OFF"; |
| case LOCATION_MODE_ALL_DISABLED_WHEN_SCREEN_OFF: |
| return "ALL_DISABLED_WHEN_SCREEN_OFF"; |
| case LOCATION_MODE_FOREGROUND_ONLY: |
| return "FOREGROUND_ONLY"; |
| case LOCATION_MODE_THROTTLE_REQUESTS_WHEN_SCREEN_OFF: |
| return "THROTTLE_REQUESTS_WHEN_SCREEN_OFF"; |
| default: |
| return Integer.toString(mode); |
| } |
| } |
| |
| final Context mContext; |
| @UnsupportedAppUsage |
| final IPowerManager mService; |
| final Handler mHandler; |
| |
| IThermalService mThermalService; |
| private final ArrayMap<OnThermalStatusChangedListener, IThermalStatusListener> |
| mListenerMap = new ArrayMap<>(); |
| |
| IDeviceIdleController mIDeviceIdleController; |
| |
| /** |
| * {@hide} |
| */ |
| public PowerManager(Context context, IPowerManager service, Handler handler) { |
| mContext = context; |
| mService = service; |
| mHandler = handler; |
| } |
| |
| /** |
| * Gets the minimum supported screen brightness setting. |
| * The screen may be allowed to become dimmer than this value but |
| * this is the minimum value that can be set by the user. |
| * @hide |
| */ |
| @UnsupportedAppUsage |
| public int getMinimumScreenBrightnessSetting() { |
| return mContext.getResources().getInteger( |
| com.android.internal.R.integer.config_screenBrightnessSettingMinimum); |
| } |
| |
| /** |
| * Gets the maximum supported screen brightness setting. |
| * The screen may be allowed to become dimmer than this value but |
| * this is the maximum value that can be set by the user. |
| * @hide |
| */ |
| @UnsupportedAppUsage |
| public int getMaximumScreenBrightnessSetting() { |
| return mContext.getResources().getInteger( |
| com.android.internal.R.integer.config_screenBrightnessSettingMaximum); |
| } |
| |
| /** |
| * Gets the default screen brightness setting. |
| * @hide |
| */ |
| @UnsupportedAppUsage |
| public int getDefaultScreenBrightnessSetting() { |
| return mContext.getResources().getInteger( |
| com.android.internal.R.integer.config_screenBrightnessSettingDefault); |
| } |
| |
| /** |
| * Gets the minimum supported screen brightness setting for VR Mode. |
| * @hide |
| */ |
| public int getMinimumScreenBrightnessForVrSetting() { |
| return mContext.getResources().getInteger( |
| com.android.internal.R.integer.config_screenBrightnessForVrSettingMinimum); |
| } |
| |
| /** |
| * Gets the maximum supported screen brightness setting for VR Mode. |
| * The screen may be allowed to become dimmer than this value but |
| * this is the maximum value that can be set by the user. |
| * @hide |
| */ |
| public int getMaximumScreenBrightnessForVrSetting() { |
| return mContext.getResources().getInteger( |
| com.android.internal.R.integer.config_screenBrightnessForVrSettingMaximum); |
| } |
| |
| /** |
| * Gets the default screen brightness for VR setting. |
| * @hide |
| */ |
| public int getDefaultScreenBrightnessForVrSetting() { |
| return mContext.getResources().getInteger( |
| com.android.internal.R.integer.config_screenBrightnessForVrSettingDefault); |
| } |
| |
| /** |
| * Creates a new wake lock with the specified level and flags. |
| * <p> |
| * The {@code levelAndFlags} parameter specifies a wake lock level and optional flags |
| * combined using the logical OR operator. |
| * </p><p> |
| * The wake lock levels are: {@link #PARTIAL_WAKE_LOCK}, |
| * {@link #FULL_WAKE_LOCK}, {@link #SCREEN_DIM_WAKE_LOCK} |
| * and {@link #SCREEN_BRIGHT_WAKE_LOCK}. Exactly one wake lock level must be |
| * specified as part of the {@code levelAndFlags} parameter. |
| * </p><p> |
| * The wake lock flags are: {@link #ACQUIRE_CAUSES_WAKEUP} |
| * and {@link #ON_AFTER_RELEASE}. Multiple flags can be combined as part of the |
| * {@code levelAndFlags} parameters. |
| * </p><p> |
| * Call {@link WakeLock#acquire() acquire()} on the object to acquire the |
| * wake lock, and {@link WakeLock#release release()} when you are done. |
| * </p><p> |
| * {@samplecode |
| * PowerManager pm = (PowerManager)mContext.getSystemService( |
| * Context.POWER_SERVICE); |
| * PowerManager.WakeLock wl = pm.newWakeLock( |
| * PowerManager.SCREEN_DIM_WAKE_LOCK |
| * | PowerManager.ON_AFTER_RELEASE, |
| * TAG); |
| * wl.acquire(); |
| * // ... do work... |
| * wl.release(); |
| * } |
| * </p><p> |
| * Although a wake lock can be created without special permissions, |
| * the {@link android.Manifest.permission#WAKE_LOCK} permission is |
| * required to actually acquire or release the wake lock that is returned. |
| * </p><p class="note"> |
| * If using this to keep the screen on, you should strongly consider using |
| * {@link android.view.WindowManager.LayoutParams#FLAG_KEEP_SCREEN_ON} instead. |
| * This window flag will be correctly managed by the platform |
| * as the user moves between applications and doesn't require a special permission. |
| * </p> |
| * |
| * <p> |
| * Recommended naming conventions for tags to make debugging easier: |
| * <ul> |
| * <li>use a unique prefix delimited by a colon for your app/library (e.g. |
| * gmail:mytag) to make it easier to understand where the wake locks comes |
| * from. This namespace will also avoid collision for tags inside your app |
| * coming from different libraries which will make debugging easier. |
| * <li>use constants (e.g. do not include timestamps in the tag) to make it |
| * easier for tools to aggregate similar wake locks. When collecting |
| * debugging data, the platform only monitors a finite number of tags, |
| * using constants will help tools to provide better debugging data. |
| * <li>avoid using Class#getName() or similar method since this class name |
| * can be transformed by java optimizer and obfuscator tools. |
| * <li>avoid wrapping the tag or a prefix to avoid collision with wake lock |
| * tags from the platform (e.g. *alarm*). |
| * <li>never include personnally identifiable information for privacy |
| * reasons. |
| * </ul> |
| * </p> |
| * |
| * @param levelAndFlags Combination of wake lock level and flag values defining |
| * the requested behavior of the WakeLock. |
| * @param tag Your class name (or other tag) for debugging purposes. |
| * |
| * @see WakeLock#acquire() |
| * @see WakeLock#release() |
| * @see #PARTIAL_WAKE_LOCK |
| * @see #FULL_WAKE_LOCK |
| * @see #SCREEN_DIM_WAKE_LOCK |
| * @see #SCREEN_BRIGHT_WAKE_LOCK |
| * @see #PROXIMITY_SCREEN_OFF_WAKE_LOCK |
| * @see #ACQUIRE_CAUSES_WAKEUP |
| * @see #ON_AFTER_RELEASE |
| */ |
| public WakeLock newWakeLock(int levelAndFlags, String tag) { |
| validateWakeLockParameters(levelAndFlags, tag); |
| return new WakeLock(levelAndFlags, tag, mContext.getOpPackageName()); |
| } |
| |
| /** @hide */ |
| @UnsupportedAppUsage |
| public static void validateWakeLockParameters(int levelAndFlags, String tag) { |
| switch (levelAndFlags & WAKE_LOCK_LEVEL_MASK) { |
| case PARTIAL_WAKE_LOCK: |
| case SCREEN_DIM_WAKE_LOCK: |
| case SCREEN_BRIGHT_WAKE_LOCK: |
| case FULL_WAKE_LOCK: |
| case PROXIMITY_SCREEN_OFF_WAKE_LOCK: |
| case DOZE_WAKE_LOCK: |
| case DRAW_WAKE_LOCK: |
| break; |
| default: |
| throw new IllegalArgumentException("Must specify a valid wake lock level."); |
| } |
| if (tag == null) { |
| throw new IllegalArgumentException("The tag must not be null."); |
| } |
| } |
| |
| /** |
| * Notifies the power manager that user activity happened. |
| * <p> |
| * Resets the auto-off timer and brightens the screen if the device |
| * is not asleep. This is what happens normally when a key or the touch |
| * screen is pressed or when some other user activity occurs. |
| * This method does not wake up the device if it has been put to sleep. |
| * </p><p> |
| * Requires the {@link android.Manifest.permission#DEVICE_POWER} permission. |
| * </p> |
| * |
| * @param when The time of the user activity, in the {@link SystemClock#uptimeMillis()} |
| * time base. This timestamp is used to correctly order the user activity request with |
| * other power management functions. It should be set |
| * to the timestamp of the input event that caused the user activity. |
| * @param noChangeLights If true, does not cause the keyboard backlight to turn on |
| * because of this event. This is set when the power key is pressed. |
| * We want the device to stay on while the button is down, but we're about |
| * to turn off the screen so we don't want the keyboard backlight to turn on again. |
| * Otherwise the lights flash on and then off and it looks weird. |
| * |
| * @see #wakeUp |
| * @see #goToSleep |
| * |
| * @removed Requires signature or system permission. |
| * @deprecated Use {@link #userActivity(long, int, int)}. |
| */ |
| @Deprecated |
| public void userActivity(long when, boolean noChangeLights) { |
| userActivity(when, USER_ACTIVITY_EVENT_OTHER, |
| noChangeLights ? USER_ACTIVITY_FLAG_NO_CHANGE_LIGHTS : 0); |
| } |
| |
| /** |
| * Notifies the power manager that user activity happened. |
| * <p> |
| * Resets the auto-off timer and brightens the screen if the device |
| * is not asleep. This is what happens normally when a key or the touch |
| * screen is pressed or when some other user activity occurs. |
| * This method does not wake up the device if it has been put to sleep. |
| * </p><p> |
| * Requires the {@link android.Manifest.permission#DEVICE_POWER} or |
| * {@link android.Manifest.permission#USER_ACTIVITY} permission. |
| * </p> |
| * |
| * @param when The time of the user activity, in the {@link SystemClock#uptimeMillis()} |
| * time base. This timestamp is used to correctly order the user activity request with |
| * other power management functions. It should be set |
| * to the timestamp of the input event that caused the user activity. |
| * @param event The user activity event. |
| * @param flags Optional user activity flags. |
| * |
| * @see #wakeUp |
| * @see #goToSleep |
| * |
| * @hide Requires signature or system permission. |
| */ |
| @SystemApi |
| @RequiresPermission(anyOf = { |
| android.Manifest.permission.DEVICE_POWER, |
| android.Manifest.permission.USER_ACTIVITY |
| }) |
| public void userActivity(long when, int event, int flags) { |
| try { |
| mService.userActivity(when, event, flags); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Forces the device to go to sleep. |
| * <p> |
| * Overrides all the wake locks that are held. |
| * This is what happens when the power key is pressed to turn off the screen. |
| * </p><p> |
| * Requires the {@link android.Manifest.permission#DEVICE_POWER} permission. |
| * </p> |
| * |
| * @param time The time when the request to go to sleep was issued, in the |
| * {@link SystemClock#uptimeMillis()} time base. This timestamp is used to correctly |
| * order the go to sleep request with other power management functions. It should be set |
| * to the timestamp of the input event that caused the request to go to sleep. |
| * |
| * @see #userActivity |
| * @see #wakeUp |
| * |
| * @removed Requires signature permission. |
| */ |
| public void goToSleep(long time) { |
| goToSleep(time, GO_TO_SLEEP_REASON_APPLICATION, 0); |
| } |
| |
| /** |
| * Forces the device to go to sleep. |
| * <p> |
| * Overrides all the wake locks that are held. |
| * This is what happens when the power key is pressed to turn off the screen. |
| * </p><p> |
| * Requires the {@link android.Manifest.permission#DEVICE_POWER} permission. |
| * </p> |
| * |
| * @param time The time when the request to go to sleep was issued, in the |
| * {@link SystemClock#uptimeMillis()} time base. This timestamp is used to correctly |
| * order the go to sleep request with other power management functions. It should be set |
| * to the timestamp of the input event that caused the request to go to sleep. |
| * @param reason The reason the device is going to sleep. |
| * @param flags Optional flags to apply when going to sleep. |
| * |
| * @see #userActivity |
| * @see #wakeUp |
| * |
| * @hide Requires signature permission. |
| */ |
| @UnsupportedAppUsage |
| public void goToSleep(long time, int reason, int flags) { |
| try { |
| mService.goToSleep(time, reason, flags); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Forces the device to wake up from sleep. |
| * <p> |
| * If the device is currently asleep, wakes it up, otherwise does nothing. |
| * This is what happens when the power key is pressed to turn on the screen. |
| * </p><p> |
| * Requires the {@link android.Manifest.permission#DEVICE_POWER} permission. |
| * </p> |
| * |
| * @param time The time when the request to wake up was issued, in the |
| * {@link SystemClock#uptimeMillis()} time base. This timestamp is used to correctly |
| * order the wake up request with other power management functions. It should be set |
| * to the timestamp of the input event that caused the request to wake up. |
| * |
| * @see #userActivity |
| * @see #goToSleep |
| * |
| * @deprecated Use {@link #wakeUp(long, int, String)} instead. |
| * @removed Requires signature permission. |
| */ |
| @Deprecated |
| public void wakeUp(long time) { |
| wakeUp(time, WAKE_REASON_UNKNOWN, "wakeUp"); |
| } |
| |
| /** |
| * Forces the device to wake up from sleep. |
| * <p> |
| * If the device is currently asleep, wakes it up, otherwise does nothing. |
| * This is what happens when the power key is pressed to turn on the screen. |
| * </p><p> |
| * Requires the {@link android.Manifest.permission#DEVICE_POWER} permission. |
| * </p> |
| * |
| * @param time The time when the request to wake up was issued, in the |
| * {@link SystemClock#uptimeMillis()} time base. This timestamp is used to correctly |
| * order the wake up request with other power management functions. It should be set |
| * to the timestamp of the input event that caused the request to wake up. |
| * |
| * @param details A free form string to explain the specific details behind the wake up for |
| * debugging purposes. |
| * |
| * @see #userActivity |
| * @see #goToSleep |
| * |
| * @deprecated Use {@link #wakeUp(long, int, String)} instead. |
| * @hide |
| */ |
| @UnsupportedAppUsage |
| @Deprecated |
| public void wakeUp(long time, String details) { |
| wakeUp(time, WAKE_REASON_UNKNOWN, details); |
| } |
| |
| /** |
| * Forces the device to wake up from sleep. |
| * <p> |
| * If the device is currently asleep, wakes it up, otherwise does nothing. |
| * This is what happens when the power key is pressed to turn on the screen. |
| * </p><p> |
| * Requires the {@link android.Manifest.permission#DEVICE_POWER} permission. |
| * </p> |
| * |
| * @param time The time when the request to wake up was issued, in the |
| * {@link SystemClock#uptimeMillis()} time base. This timestamp is used to correctly |
| * order the wake up request with other power management functions. It should be set |
| * to the timestamp of the input event that caused the request to wake up. |
| * |
| * @param reason The reason for the wake up. |
| * |
| * @param details A free form string to explain the specific details behind the wake up for |
| * debugging purposes. |
| * |
| * @see #userActivity |
| * @see #goToSleep |
| * @hide |
| */ |
| public void wakeUp(long time, @WakeReason int reason, String details) { |
| try { |
| mService.wakeUp(time, reason, details, mContext.getOpPackageName()); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Forces the device to start napping. |
| * <p> |
| * If the device is currently awake, starts dreaming, otherwise does nothing. |
| * When the dream ends or if the dream cannot be started, the device will |
| * either wake up or go to sleep depending on whether there has been recent |
| * user activity. |
| * </p><p> |
| * Requires the {@link android.Manifest.permission#DEVICE_POWER} permission. |
| * </p> |
| * |
| * @param time The time when the request to nap was issued, in the |
| * {@link SystemClock#uptimeMillis()} time base. This timestamp is used to correctly |
| * order the nap request with other power management functions. It should be set |
| * to the timestamp of the input event that caused the request to nap. |
| * |
| * @see #wakeUp |
| * @see #goToSleep |
| * |
| * @hide Requires signature permission. |
| */ |
| public void nap(long time) { |
| try { |
| mService.nap(time); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Requests the device to start dreaming. |
| * <p> |
| * If dream can not be started, for example if another {@link PowerManager} transition is in |
| * progress, does nothing. Unlike {@link #nap(long)}, this does not put device to sleep when |
| * dream ends. |
| * </p><p> |
| * Requires the {@link android.Manifest.permission#READ_DREAM_STATE} and |
| * {@link android.Manifest.permission#WRITE_DREAM_STATE} permissions. |
| * </p> |
| * |
| * @param time The time when the request to nap was issued, in the |
| * {@link SystemClock#uptimeMillis()} time base. This timestamp may be used to correctly |
| * order the dream request with other power management functions. It should be set |
| * to the timestamp of the input event that caused the request to dream. |
| * |
| * @hide |
| */ |
| @SystemApi |
| @RequiresPermission(allOf = { |
| android.Manifest.permission.READ_DREAM_STATE, |
| android.Manifest.permission.WRITE_DREAM_STATE }) |
| public void dream(long time) { |
| Sandman.startDreamByUserRequest(mContext); |
| } |
| |
| /** |
| * Boosts the brightness of the screen to maximum for a predetermined |
| * period of time. This is used to make the screen more readable in bright |
| * daylight for a short duration. |
| * <p> |
| * Requires the {@link android.Manifest.permission#DEVICE_POWER} permission. |
| * </p> |
| * |
| * @param time The time when the request to boost was issued, in the |
| * {@link SystemClock#uptimeMillis()} time base. This timestamp is used to correctly |
| * order the boost request with other power management functions. It should be set |
| * to the timestamp of the input event that caused the request to boost. |
| * |
| * @hide Requires signature permission. |
| */ |
| public void boostScreenBrightness(long time) { |
| try { |
| mService.boostScreenBrightness(time); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Returns whether the screen brightness is currently boosted to maximum, caused by a call |
| * to {@link #boostScreenBrightness(long)}. |
| * @return {@code True} if the screen brightness is currently boosted. {@code False} otherwise. |
| * |
| * @deprecated This call is rarely used and will be phased out soon. |
| * @hide |
| * @removed |
| */ |
| @SystemApi @Deprecated |
| public boolean isScreenBrightnessBoosted() { |
| return false; |
| } |
| |
| /** |
| * Returns true if the specified wake lock level is supported. |
| * |
| * @param level The wake lock level to check. |
| * @return True if the specified wake lock level is supported. |
| */ |
| public boolean isWakeLockLevelSupported(int level) { |
| try { |
| return mService.isWakeLockLevelSupported(level); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Returns true if the device is in an interactive state. |
| * <p> |
| * For historical reasons, the name of this method refers to the power state of |
| * the screen but it actually describes the overall interactive state of |
| * the device. This method has been replaced by {@link #isInteractive}. |
| * </p><p> |
| * The value returned by this method only indicates whether the device is |
| * in an interactive state which may have nothing to do with the screen being |
| * on or off. To determine the actual state of the screen, |
| * use {@link android.view.Display#getState}. |
| * </p> |
| * |
| * @return True if the device is in an interactive state. |
| * |
| * @deprecated Use {@link #isInteractive} instead. |
| */ |
| @Deprecated |
| public boolean isScreenOn() { |
| return isInteractive(); |
| } |
| |
| /** |
| * Returns true if the device is in an interactive state. |
| * <p> |
| * When this method returns true, the device is awake and ready to interact |
| * with the user (although this is not a guarantee that the user is actively |
| * interacting with the device just this moment). The main screen is usually |
| * turned on while in this state. Certain features, such as the proximity |
| * sensor, may temporarily turn off the screen while still leaving the device in an |
| * interactive state. Note in particular that the device is still considered |
| * to be interactive while dreaming (since dreams can be interactive) but not |
| * when it is dozing or asleep. |
| * </p><p> |
| * When this method returns false, the device is dozing or asleep and must |
| * be awoken before it will become ready to interact with the user again. The |
| * main screen is usually turned off while in this state. Certain features, |
| * such as "ambient mode" may cause the main screen to remain on (albeit in a |
| * low power state) to display system-provided content while the device dozes. |
| * </p><p> |
| * The system will send a {@link android.content.Intent#ACTION_SCREEN_ON screen on} |
| * or {@link android.content.Intent#ACTION_SCREEN_OFF screen off} broadcast |
| * whenever the interactive state of the device changes. For historical reasons, |
| * the names of these broadcasts refer to the power state of the screen |
| * but they are actually sent in response to changes in the overall interactive |
| * state of the device, as described by this method. |
| * </p><p> |
| * Services may use the non-interactive state as a hint to conserve power |
| * since the user is not present. |
| * </p> |
| * |
| * @return True if the device is in an interactive state. |
| * |
| * @see android.content.Intent#ACTION_SCREEN_ON |
| * @see android.content.Intent#ACTION_SCREEN_OFF |
| */ |
| public boolean isInteractive() { |
| try { |
| return mService.isInteractive(); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Reboot the device. Will not return if the reboot is successful. |
| * <p> |
| * Requires the {@link android.Manifest.permission#REBOOT} permission. |
| * </p> |
| * |
| * @param reason code to pass to the kernel (e.g., "recovery") to |
| * request special boot modes, or null. |
| */ |
| public void reboot(String reason) { |
| try { |
| mService.reboot(false, reason, true); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Reboot the device. Will not return if the reboot is successful. |
| * <p> |
| * Requires the {@link android.Manifest.permission#REBOOT} permission. |
| * </p> |
| * @hide |
| */ |
| public void rebootSafeMode() { |
| try { |
| mService.rebootSafeMode(false, true); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Returns true if the device is currently in power save mode. When in this mode, |
| * applications should reduce their functionality in order to conserve battery as |
| * much as possible. You can monitor for changes to this state with |
| * {@link #ACTION_POWER_SAVE_MODE_CHANGED}. |
| * |
| * @return Returns true if currently in low power mode, else false. |
| */ |
| public boolean isPowerSaveMode() { |
| try { |
| return mService.isPowerSaveMode(); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Set the current power save mode. |
| * |
| * @return True if the set was allowed. |
| * |
| * @hide |
| * @see #isPowerSaveMode() |
| */ |
| @SystemApi |
| @TestApi |
| @RequiresPermission(anyOf = { |
| android.Manifest.permission.DEVICE_POWER, |
| android.Manifest.permission.POWER_SAVER |
| }) |
| public boolean setPowerSaveModeEnabled(boolean mode) { |
| try { |
| return mService.setPowerSaveModeEnabled(mode); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Updates the current state of dynamic power savings and disable threshold. This is |
| * a signal to the system which an app can update to serve as an indicator that |
| * the user will be in a battery critical situation before being able to plug in. |
| * Only apps with the {@link android.Manifest.permission#POWER_SAVER} permission may do this. |
| * This is a device global state, not a per user setting. |
| * |
| * <p>When enabled, the system may enact various measures for reducing power consumption in |
| * order to help ensure that the user will make it to their next charging point. The most |
| * visible of these will be the automatic enabling of battery saver if the user has set |
| * their battery saver mode to "automatic". Note |
| * that this is NOT simply an on/off switch for features, but rather a hint for the |
| * system to consider enacting these power saving features, some of which have additional |
| * logic around when to activate based on this signal. |
| * |
| * <p>The provided threshold is the percentage the system should consider itself safe at given |
| * the current state of the device. The value is an integer representing a battery level. |
| * |
| * <p>The threshold is meant to set an explicit stopping point for dynamic power savings |
| * functionality so that the dynamic power savings itself remains a signal rather than becoming |
| * an on/off switch for a subset of features. |
| * @hide |
| * |
| * @param dynamicPowerSavingsEnabled A signal indicating to the system if it believes the |
| * dynamic power savings behaviors should be activated. |
| * @param disableThreshold When the suggesting app believes it would be safe to disable dynamic |
| * power savings behaviors. |
| * @return True if the update was allowed and succeeded. |
| * |
| * @hide |
| */ |
| @SystemApi |
| @TestApi |
| @RequiresPermission(permission.POWER_SAVER) |
| public boolean setDynamicPowerSavings(boolean dynamicPowerSavingsEnabled, |
| int disableThreshold) { |
| try { |
| return mService.setDynamicPowerSavings(dynamicPowerSavingsEnabled, disableThreshold); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Sets the policy for adaptive power save. |
| * |
| * @return true if there was an effectual change. If full battery saver is enabled or the |
| * adaptive policy is not enabled, then this will return false. |
| * |
| * @hide |
| */ |
| @SystemApi |
| @RequiresPermission(anyOf = { |
| android.Manifest.permission.DEVICE_POWER, |
| android.Manifest.permission.POWER_SAVER |
| }) |
| public boolean setAdaptivePowerSavePolicy(@NonNull BatterySaverPolicyConfig config) { |
| try { |
| return mService.setAdaptivePowerSavePolicy(config); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Enables or disables adaptive power save. |
| * |
| * @return true if there was an effectual change. If full battery saver is enabled, then this |
| * will return false. |
| * |
| * @hide |
| */ |
| @SystemApi |
| @RequiresPermission(anyOf = { |
| android.Manifest.permission.DEVICE_POWER, |
| android.Manifest.permission.POWER_SAVER |
| }) |
| public boolean setAdaptivePowerSaveEnabled(boolean enabled) { |
| try { |
| return mService.setAdaptivePowerSaveEnabled(enabled); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Indicates automatic battery saver toggling by the system will be based on percentage. |
| * |
| * @see PowerManager#getPowerSaveMode() |
| * |
| * @hide |
| */ |
| @SystemApi |
| @TestApi |
| public static final int POWER_SAVER_MODE_PERCENTAGE = 0; |
| |
| /** |
| * Indicates automatic battery saver toggling by the system will be based on the state |
| * of the dynamic power savings signal. |
| * |
| * @see PowerManager#setDynamicPowerSavings(boolean, int) |
| * @see PowerManager#getPowerSaveMode() |
| * |
| * @hide |
| */ |
| @SystemApi |
| @TestApi |
| public static final int POWER_SAVER_MODE_DYNAMIC = 1; |
| |
| /** @hide */ |
| @Retention(RetentionPolicy.SOURCE) |
| @IntDef(value = { |
| POWER_SAVER_MODE_PERCENTAGE, |
| POWER_SAVER_MODE_DYNAMIC |
| |
| }) |
| public @interface AutoPowerSaverMode{} |
| |
| |
| /** |
| * Returns the current battery saver control mode. Values it may return are defined in |
| * AutoPowerSaverMode. Note that this is a global device state, not a per user setting. |
| * |
| * @return The current value power saver mode for the system. |
| * |
| * @see AutoPowerSaverMode |
| * @see PowerManager#getPowerSaveMode() |
| * @hide |
| */ |
| @AutoPowerSaverMode |
| @SystemApi |
| @TestApi |
| @RequiresPermission(android.Manifest.permission.POWER_SAVER) |
| public int getPowerSaveMode() { |
| try { |
| return mService.getPowerSaveMode(); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Get data about the battery saver mode for a specific service |
| * @param serviceType unique key for the service, one of {@link ServiceType} |
| * @return Battery saver state data. |
| * |
| * @hide |
| * @see com.android.server.power.batterysaver.BatterySaverPolicy |
| * @see PowerSaveState |
| */ |
| public PowerSaveState getPowerSaveState(@ServiceType int serviceType) { |
| try { |
| return mService.getPowerSaveState(serviceType); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Returns how location features should behave when battery saver is on. When battery saver |
| * is off, this will always return {@link #LOCATION_MODE_NO_CHANGE}. |
| * |
| * <p>This API is normally only useful for components that provide location features. |
| * |
| * @see #isPowerSaveMode() |
| * @see #ACTION_POWER_SAVE_MODE_CHANGED |
| */ |
| @LocationPowerSaveMode |
| public int getLocationPowerSaveMode() { |
| final PowerSaveState powerSaveState = getPowerSaveState(ServiceType.LOCATION); |
| if (!powerSaveState.batterySaverEnabled) { |
| return LOCATION_MODE_NO_CHANGE; |
| } |
| return powerSaveState.locationMode; |
| } |
| |
| /** |
| * Returns true if the device is currently in idle mode. This happens when a device |
| * has been sitting unused and unmoving for a sufficiently long period of time, so that |
| * it decides to go into a lower power-use state. This may involve things like turning |
| * off network access to apps. You can monitor for changes to this state with |
| * {@link #ACTION_DEVICE_IDLE_MODE_CHANGED}. |
| * |
| * @return Returns true if currently in active device idle mode, else false. This is |
| * when idle mode restrictions are being actively applied; it will return false if the |
| * device is in a long-term idle mode but currently running a maintenance window where |
| * restrictions have been lifted. |
| */ |
| public boolean isDeviceIdleMode() { |
| try { |
| return mService.isDeviceIdleMode(); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Returns true if the device is currently in light idle mode. This happens when a device |
| * has had its screen off for a short time, switching it into a batching mode where we |
| * execute jobs, syncs, networking on a batching schedule. You can monitor for changes to |
| * this state with {@link #ACTION_LIGHT_DEVICE_IDLE_MODE_CHANGED}. |
| * |
| * @return Returns true if currently in active light device idle mode, else false. This is |
| * when light idle mode restrictions are being actively applied; it will return false if the |
| * device is in a long-term idle mode but currently running a maintenance window where |
| * restrictions have been lifted. |
| * @hide |
| */ |
| @UnsupportedAppUsage |
| public boolean isLightDeviceIdleMode() { |
| try { |
| return mService.isLightDeviceIdleMode(); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Return whether the given application package name is on the device's power whitelist. |
| * Apps can be placed on the whitelist through the settings UI invoked by |
| * {@link android.provider.Settings#ACTION_IGNORE_BATTERY_OPTIMIZATION_SETTINGS}. |
| */ |
| public boolean isIgnoringBatteryOptimizations(String packageName) { |
| synchronized (this) { |
| if (mIDeviceIdleController == null) { |
| mIDeviceIdleController = IDeviceIdleController.Stub.asInterface( |
| ServiceManager.getService(Context.DEVICE_IDLE_CONTROLLER)); |
| } |
| } |
| try { |
| return mIDeviceIdleController.isPowerSaveWhitelistApp(packageName); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Turn off the device. |
| * |
| * @param confirm If true, shows a shutdown confirmation dialog. |
| * @param reason code to pass to android_reboot() (e.g. "userrequested"), or null. |
| * @param wait If true, this call waits for the shutdown to complete and does not return. |
| * |
| * @hide |
| */ |
| public void shutdown(boolean confirm, String reason, boolean wait) { |
| try { |
| mService.shutdown(confirm, reason, wait); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * This function checks if the device has implemented Sustained Performance |
| * Mode. This needs to be checked only once and is constant for a particular |
| * device/release. |
| * |
| * Sustained Performance Mode is intended to provide a consistent level of |
| * performance for prolonged amount of time. |
| * |
| * Applications should check if the device supports this mode, before using |
| * {@link android.view.Window#setSustainedPerformanceMode}. |
| * |
| * @return Returns True if the device supports it, false otherwise. |
| * |
| * @see android.view.Window#setSustainedPerformanceMode |
| */ |
| public boolean isSustainedPerformanceModeSupported() { |
| return mContext.getResources().getBoolean( |
| com.android.internal.R.bool.config_sustainedPerformanceModeSupported); |
| } |
| |
| /** |
| * Thermal status code: Not under throttling. |
| */ |
| public static final int THERMAL_STATUS_NONE = Temperature.THROTTLING_NONE; |
| |
| /** |
| * Thermal status code: Light throttling where UX is not impacted. |
| */ |
| public static final int THERMAL_STATUS_LIGHT = Temperature.THROTTLING_LIGHT; |
| |
| /** |
| * Thermal status code: Moderate throttling where UX is not largely impacted. |
| */ |
| public static final int THERMAL_STATUS_MODERATE = Temperature.THROTTLING_MODERATE; |
| |
| /** |
| * Thermal status code: Severe throttling where UX is largely impacted. |
| */ |
| public static final int THERMAL_STATUS_SEVERE = Temperature.THROTTLING_SEVERE; |
| |
| /** |
| * Thermal status code: Platform has done everything to reduce power. |
| */ |
| public static final int THERMAL_STATUS_CRITICAL = Temperature.THROTTLING_CRITICAL; |
| |
| /** |
| * Thermal status code: Key components in platform are shutting down due to thermal condition. |
| * Device functionalities will be limited. |
| */ |
| public static final int THERMAL_STATUS_EMERGENCY = Temperature.THROTTLING_EMERGENCY; |
| |
| /** |
| * Thermal status code: Need shutdown immediately. |
| */ |
| public static final int THERMAL_STATUS_SHUTDOWN = Temperature.THROTTLING_SHUTDOWN; |
| |
| /** @hide */ |
| @IntDef(prefix = { "THERMAL_STATUS_" }, value = { |
| THERMAL_STATUS_NONE, |
| THERMAL_STATUS_LIGHT, |
| THERMAL_STATUS_MODERATE, |
| THERMAL_STATUS_SEVERE, |
| THERMAL_STATUS_CRITICAL, |
| THERMAL_STATUS_EMERGENCY, |
| THERMAL_STATUS_SHUTDOWN, |
| }) |
| @Retention(RetentionPolicy.SOURCE) |
| public @interface ThermalStatus {} |
| |
| /** |
| * This function returns the current thermal status of the device. |
| * |
| * @return thermal status as int, {@link #THERMAL_STATUS_NONE} if device in not under |
| * thermal throttling. |
| */ |
| public @ThermalStatus int getCurrentThermalStatus() { |
| synchronized (this) { |
| if (mThermalService == null) { |
| mThermalService = IThermalService.Stub.asInterface( |
| ServiceManager.getService(Context.THERMAL_SERVICE)); |
| } |
| try { |
| return mThermalService.getCurrentThermalStatus(); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| } |
| |
| /** |
| * Listener passed to |
| * {@link PowerManager#addThermalStatusListener} and |
| * {@link PowerManager#removeThermalStatusListener} |
| * to notify caller of thermal status has changed. |
| */ |
| public interface OnThermalStatusChangedListener { |
| |
| /** |
| * Called when overall thermal throttling status changed. |
| * @param status defined in {@link android.os.Temperature}. |
| */ |
| void onThermalStatusChanged(@ThermalStatus int status); |
| } |
| |
| |
| /** |
| * This function adds a listener for thermal status change, listen call back will be |
| * enqueued tasks on the main thread |
| * |
| * @param listener listener to be added, |
| */ |
| public void addThermalStatusListener(@NonNull OnThermalStatusChangedListener listener) { |
| Preconditions.checkNotNull(listener, "listener cannot be null"); |
| synchronized (this) { |
| if (mThermalService == null) { |
| mThermalService = IThermalService.Stub.asInterface( |
| ServiceManager.getService(Context.THERMAL_SERVICE)); |
| } |
| this.addThermalStatusListener(mContext.getMainExecutor(), listener); |
| } |
| } |
| |
| /** |
| * This function adds a listener for thermal status change. |
| * |
| * @param executor {@link Executor} to handle listener callback. |
| * @param listener listener to be added. |
| */ |
| public void addThermalStatusListener(@NonNull @CallbackExecutor Executor executor, |
| @NonNull OnThermalStatusChangedListener listener) { |
| Preconditions.checkNotNull(listener, "listener cannot be null"); |
| Preconditions.checkNotNull(executor, "executor cannot be null"); |
| synchronized (this) { |
| if (mThermalService == null) { |
| mThermalService = IThermalService.Stub.asInterface( |
| ServiceManager.getService(Context.THERMAL_SERVICE)); |
| } |
| Preconditions.checkArgument(!mListenerMap.containsKey(listener), |
| "Listener already registered: " + listener); |
| IThermalStatusListener internalListener = new IThermalStatusListener.Stub() { |
| @Override |
| public void onStatusChange(int status) { |
| final long token = Binder.clearCallingIdentity(); |
| try { |
| executor.execute(() -> { |
| listener.onThermalStatusChanged(status); |
| }); |
| } finally { |
| Binder.restoreCallingIdentity(token); |
| } |
| } |
| }; |
| try { |
| if (mThermalService.registerThermalStatusListener(internalListener)) { |
| mListenerMap.put(listener, internalListener); |
| } else { |
| throw new RuntimeException("Listener failed to set"); |
| } |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| } |
| |
| /** |
| * This function removes a listener for thermal status change |
| * |
| * @param listener listener to be removed |
| */ |
| public void removeThermalStatusListener(@NonNull OnThermalStatusChangedListener listener) { |
| Preconditions.checkNotNull(listener, "listener cannot be null"); |
| synchronized (this) { |
| if (mThermalService == null) { |
| mThermalService = IThermalService.Stub.asInterface( |
| ServiceManager.getService(Context.THERMAL_SERVICE)); |
| } |
| IThermalStatusListener internalListener = mListenerMap.get(listener); |
| Preconditions.checkArgument(internalListener != null, "Listener was not added"); |
| try { |
| if (mThermalService.unregisterThermalStatusListener(internalListener)) { |
| mListenerMap.remove(listener); |
| } else { |
| throw new RuntimeException("Listener failed to remove"); |
| } |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| } |
| |
| /** |
| * If true, the doze component is not started until after the screen has been |
| * turned off and the screen off animation has been performed. |
| * @hide |
| */ |
| public void setDozeAfterScreenOff(boolean dozeAfterScreenOf) { |
| try { |
| mService.setDozeAfterScreenOff(dozeAfterScreenOf); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Returns the reason the phone was last shutdown. Calling app must have the |
| * {@link android.Manifest.permission#DEVICE_POWER} permission to request this information. |
| * @return Reason for shutdown as an int, {@link #SHUTDOWN_REASON_UNKNOWN} if the file could |
| * not be accessed. |
| * @hide |
| */ |
| @ShutdownReason |
| public int getLastShutdownReason() { |
| try { |
| return mService.getLastShutdownReason(); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Returns the reason the device last went to sleep (i.e. the last value of |
| * the second argument of {@link #goToSleep(long, int, int) goToSleep}). |
| * |
| * @return One of the {@code GO_TO_SLEEP_REASON_*} constants. |
| * |
| * @hide |
| */ |
| public int getLastSleepReason() { |
| try { |
| return mService.getLastSleepReason(); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Forces the device to go to suspend, even if there are currently wakelocks being held. |
| * <b>Caution</b> |
| * This is a very dangerous command as it puts the device to sleep immediately. Apps and parts |
| * of the system will not be notified and will not have an opportunity to save state prior to |
| * the device going to suspend. |
| * This method should only be used in very rare circumstances where the device is intended |
| * to appear as completely off to the user and they have a well understood, reliable way of |
| * re-enabling it. |
| * </p><p> |
| * Requires the {@link android.Manifest.permission#DEVICE_POWER} permission. |
| * </p> |
| * |
| * @return true on success, false otherwise. |
| * @hide |
| */ |
| @SystemApi |
| @RequiresPermission(android.Manifest.permission.DEVICE_POWER) |
| public boolean forceSuspend() { |
| try { |
| return mService.forceSuspend(); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| |
| /** |
| * Intent that is broadcast when the state of {@link #isPowerSaveMode()} changes. |
| * This broadcast is only sent to registered receivers. |
| */ |
| @SdkConstant(SdkConstant.SdkConstantType.BROADCAST_INTENT_ACTION) |
| public static final String ACTION_POWER_SAVE_MODE_CHANGED |
| = "android.os.action.POWER_SAVE_MODE_CHANGED"; |
| |
| /** |
| * Intent that is broadcast when the state of {@link #isPowerSaveMode()} changes. |
| * @hide |
| */ |
| @SdkConstant(SdkConstant.SdkConstantType.BROADCAST_INTENT_ACTION) |
| public static final String ACTION_POWER_SAVE_MODE_CHANGED_INTERNAL |
| = "android.os.action.POWER_SAVE_MODE_CHANGED_INTERNAL"; |
| |
| /** |
| * Intent that is broadcast when the state of {@link #isDeviceIdleMode()} changes. |
| * This broadcast is only sent to registered receivers. |
| */ |
| @SdkConstant(SdkConstant.SdkConstantType.BROADCAST_INTENT_ACTION) |
| public static final String ACTION_DEVICE_IDLE_MODE_CHANGED |
| = "android.os.action.DEVICE_IDLE_MODE_CHANGED"; |
| |
| /** |
| * Intent that is broadcast when the state of {@link #isLightDeviceIdleMode()} changes. |
| * This broadcast is only sent to registered receivers. |
| * @hide |
| */ |
| @UnsupportedAppUsage |
| @SdkConstant(SdkConstant.SdkConstantType.BROADCAST_INTENT_ACTION) |
| public static final String ACTION_LIGHT_DEVICE_IDLE_MODE_CHANGED |
| = "android.os.action.LIGHT_DEVICE_IDLE_MODE_CHANGED"; |
| |
| /** |
| * @hide Intent that is broadcast when the set of power save whitelist apps has changed. |
| * This broadcast is only sent to registered receivers. |
| */ |
| @SdkConstant(SdkConstant.SdkConstantType.BROADCAST_INTENT_ACTION) |
| public static final String ACTION_POWER_SAVE_WHITELIST_CHANGED |
| = "android.os.action.POWER_SAVE_WHITELIST_CHANGED"; |
| |
| /** |
| * @hide Intent that is broadcast when the set of temporarily whitelisted apps has changed. |
| * This broadcast is only sent to registered receivers. |
| */ |
| @SdkConstant(SdkConstant.SdkConstantType.BROADCAST_INTENT_ACTION) |
| public static final String ACTION_POWER_SAVE_TEMP_WHITELIST_CHANGED |
| = "android.os.action.POWER_SAVE_TEMP_WHITELIST_CHANGED"; |
| |
| /** |
| * Intent that is broadcast when the state of {@link #isPowerSaveMode()} is about to change. |
| * This broadcast is only sent to registered receivers. |
| * |
| * @hide |
| */ |
| @UnsupportedAppUsage |
| @SdkConstant(SdkConstant.SdkConstantType.BROADCAST_INTENT_ACTION) |
| public static final String ACTION_POWER_SAVE_MODE_CHANGING |
| = "android.os.action.POWER_SAVE_MODE_CHANGING"; |
| |
| /** @hide */ |
| @UnsupportedAppUsage |
| public static final String EXTRA_POWER_SAVE_MODE = "mode"; |
| |
| /** |
| * Intent that is broadcast when the state of {@link #isScreenBrightnessBoosted()} has changed. |
| * This broadcast is only sent to registered receivers. |
| * |
| * @deprecated This intent is rarely used and will be phased out soon. |
| * @hide |
| * @removed |
| **/ |
| @SystemApi @Deprecated |
| public static final String ACTION_SCREEN_BRIGHTNESS_BOOST_CHANGED |
| = "android.os.action.SCREEN_BRIGHTNESS_BOOST_CHANGED"; |
| |
| /** |
| * Constant for PreIdleTimeout normal mode (default mode, not short nor extend timeout) . |
| * @hide |
| */ |
| public static final int PRE_IDLE_TIMEOUT_MODE_NORMAL = 0; |
| |
| /** |
| * Constant for PreIdleTimeout long mode (extend timeout to keep in inactive mode |
| * longer). |
| * @hide |
| */ |
| public static final int PRE_IDLE_TIMEOUT_MODE_LONG = 1; |
| |
| /** |
| * Constant for PreIdleTimeout short mode (short timeout to go to doze mode quickly) |
| * @hide |
| */ |
| public static final int PRE_IDLE_TIMEOUT_MODE_SHORT = 2; |
| |
| /** |
| * A wake lock is a mechanism to indicate that your application needs |
| * to have the device stay on. |
| * <p> |
| * Any application using a WakeLock must request the {@code android.permission.WAKE_LOCK} |
| * permission in an {@code <uses-permission>} element of the application's manifest. |
| * Obtain a wake lock by calling {@link PowerManager#newWakeLock(int, String)}. |
| * </p><p> |
| * Call {@link #acquire()} to acquire the wake lock and force the device to stay |
| * on at the level that was requested when the wake lock was created. |
| * </p><p> |
| * Call {@link #release()} when you are done and don't need the lock anymore. |
| * It is very important to do this as soon as possible to avoid running down the |
| * device's battery excessively. |
| * </p> |
| */ |
| public final class WakeLock { |
| @UnsupportedAppUsage |
| private int mFlags; |
| @UnsupportedAppUsage |
| private String mTag; |
| private final String mPackageName; |
| private final IBinder mToken; |
| private int mInternalCount; |
| private int mExternalCount; |
| private boolean mRefCounted = true; |
| private boolean mHeld; |
| private WorkSource mWorkSource; |
| private String mHistoryTag; |
| private final String mTraceName; |
| |
| private final Runnable mReleaser = new Runnable() { |
| public void run() { |
| release(RELEASE_FLAG_TIMEOUT); |
| } |
| }; |
| |
| WakeLock(int flags, String tag, String packageName) { |
| mFlags = flags; |
| mTag = tag; |
| mPackageName = packageName; |
| mToken = new Binder(); |
| mTraceName = "WakeLock (" + mTag + ")"; |
| } |
| |
| @Override |
| protected void finalize() throws Throwable { |
| synchronized (mToken) { |
| if (mHeld) { |
| Log.wtf(TAG, "WakeLock finalized while still held: " + mTag); |
| Trace.asyncTraceEnd(Trace.TRACE_TAG_POWER, mTraceName, 0); |
| try { |
| mService.releaseWakeLock(mToken, 0); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| } |
| } |
| |
| /** |
| * Sets whether this WakeLock is reference counted. |
| * <p> |
| * Wake locks are reference counted by default. If a wake lock is |
| * reference counted, then each call to {@link #acquire()} must be |
| * balanced by an equal number of calls to {@link #release()}. If a wake |
| * lock is not reference counted, then one call to {@link #release()} is |
| * sufficient to undo the effect of all previous calls to {@link #acquire()}. |
| * </p> |
| * |
| * @param value True to make the wake lock reference counted, false to |
| * make the wake lock non-reference counted. |
| */ |
| public void setReferenceCounted(boolean value) { |
| synchronized (mToken) { |
| mRefCounted = value; |
| } |
| } |
| |
| /** |
| * Acquires the wake lock. |
| * <p> |
| * Ensures that the device is on at the level requested when |
| * the wake lock was created. |
| * </p> |
| */ |
| public void acquire() { |
| synchronized (mToken) { |
| acquireLocked(); |
| } |
| } |
| |
| /** |
| * Acquires the wake lock with a timeout. |
| * <p> |
| * Ensures that the device is on at the level requested when |
| * the wake lock was created. The lock will be released after the given timeout |
| * expires. |
| * </p> |
| * |
| * @param timeout The timeout after which to release the wake lock, in milliseconds. |
| */ |
| public void acquire(long timeout) { |
| synchronized (mToken) { |
| acquireLocked(); |
| mHandler.postDelayed(mReleaser, timeout); |
| } |
| } |
| |
| private void acquireLocked() { |
| mInternalCount++; |
| mExternalCount++; |
| if (!mRefCounted || mInternalCount == 1) { |
| // Do this even if the wake lock is already thought to be held (mHeld == true) |
| // because non-reference counted wake locks are not always properly released. |
| // For example, the keyguard's wake lock might be forcibly released by the |
| // power manager without the keyguard knowing. A subsequent call to acquire |
| // should immediately acquire the wake lock once again despite never having |
| // been explicitly released by the keyguard. |
| mHandler.removeCallbacks(mReleaser); |
| Trace.asyncTraceBegin(Trace.TRACE_TAG_POWER, mTraceName, 0); |
| try { |
| mService.acquireWakeLock(mToken, mFlags, mTag, mPackageName, mWorkSource, |
| mHistoryTag); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| mHeld = true; |
| } |
| } |
| |
| /** |
| * Releases the wake lock. |
| * <p> |
| * This method releases your claim to the CPU or screen being on. |
| * The screen may turn off shortly after you release the wake lock, or it may |
| * not if there are other wake locks still held. |
| * </p> |
| */ |
| public void release() { |
| release(0); |
| } |
| |
| /** |
| * Releases the wake lock with flags to modify the release behavior. |
| * <p> |
| * This method releases your claim to the CPU or screen being on. |
| * The screen may turn off shortly after you release the wake lock, or it may |
| * not if there are other wake locks still held. |
| * </p> |
| * |
| * @param flags Combination of flag values to modify the release behavior. |
| * Currently only {@link #RELEASE_FLAG_WAIT_FOR_NO_PROXIMITY} is supported. |
| * Passing 0 is equivalent to calling {@link #release()}. |
| */ |
| public void release(int flags) { |
| synchronized (mToken) { |
| if (mInternalCount > 0) { |
| // internal count must only be decreased if it is > 0 or state of |
| // the WakeLock object is broken. |
| mInternalCount--; |
| } |
| if ((flags & RELEASE_FLAG_TIMEOUT) == 0) { |
| mExternalCount--; |
| } |
| if (!mRefCounted || mInternalCount == 0) { |
| mHandler.removeCallbacks(mReleaser); |
| if (mHeld) { |
| Trace.asyncTraceEnd(Trace.TRACE_TAG_POWER, mTraceName, 0); |
| try { |
| mService.releaseWakeLock(mToken, flags); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| mHeld = false; |
| } |
| } |
| if (mRefCounted && mExternalCount < 0) { |
| throw new RuntimeException("WakeLock under-locked " + mTag); |
| } |
| } |
| } |
| |
| /** |
| * Returns true if the wake lock has been acquired but not yet released. |
| * |
| * @return True if the wake lock is held. |
| */ |
| public boolean isHeld() { |
| synchronized (mToken) { |
| return mHeld; |
| } |
| } |
| |
| /** |
| * Sets the work source associated with the wake lock. |
| * <p> |
| * The work source is used to determine on behalf of which application |
| * the wake lock is being held. This is useful in the case where a |
| * service is performing work on behalf of an application so that the |
| * cost of that work can be accounted to the application. |
| * </p> |
| * |
| * <p> |
| * Make sure to follow the tag naming convention when using WorkSource |
| * to make it easier for app developers to understand wake locks |
| * attributed to them. See {@link PowerManager#newWakeLock(int, String)} |
| * documentation. |
| * </p> |
| * |
| * @param ws The work source, or null if none. |
| */ |
| public void setWorkSource(WorkSource ws) { |
| synchronized (mToken) { |
| if (ws != null && ws.isEmpty()) { |
| ws = null; |
| } |
| |
| final boolean changed; |
| if (ws == null) { |
| changed = mWorkSource != null; |
| mWorkSource = null; |
| } else if (mWorkSource == null) { |
| changed = true; |
| mWorkSource = new WorkSource(ws); |
| } else { |
| changed = !mWorkSource.equals(ws); |
| if (changed) { |
| mWorkSource.set(ws); |
| } |
| } |
| |
| if (changed && mHeld) { |
| try { |
| mService.updateWakeLockWorkSource(mToken, mWorkSource, mHistoryTag); |
| } catch (RemoteException e) { |
| throw e.rethrowFromSystemServer(); |
| } |
| } |
| } |
| } |
| |
| /** @hide */ |
| public void setTag(String tag) { |
| mTag = tag; |
| } |
| |
| /** @hide */ |
| public String getTag() { |
| return mTag; |
| } |
| |
| /** @hide */ |
| public void setHistoryTag(String tag) { |
| mHistoryTag = tag; |
| } |
| |
| /** @hide */ |
| public void setUnimportantForLogging(boolean state) { |
| if (state) mFlags |= UNIMPORTANT_FOR_LOGGING; |
| else mFlags &= ~UNIMPORTANT_FOR_LOGGING; |
| } |
| |
| @Override |
| public String toString() { |
| synchronized (mToken) { |
| return "WakeLock{" |
| + Integer.toHexString(System.identityHashCode(this)) |
| + " held=" + mHeld + ", refCount=" + mInternalCount + "}"; |
| } |
| } |
| |
| /** @hide */ |
| public void writeToProto(ProtoOutputStream proto, long fieldId) { |
| synchronized (mToken) { |
| final long token = proto.start(fieldId); |
| proto.write(PowerManagerProto.WakeLock.TAG, mTag); |
| proto.write(PowerManagerProto.WakeLock.PACKAGE_NAME, mPackageName); |
| proto.write(PowerManagerProto.WakeLock.HELD, mHeld); |
| proto.write(PowerManagerProto.WakeLock.INTERNAL_COUNT, mInternalCount); |
| if (mWorkSource != null) { |
| mWorkSource.writeToProto(proto, PowerManagerProto.WakeLock.WORK_SOURCE); |
| } |
| proto.end(token); |
| } |
| } |
| |
| /** |
| * Wraps a Runnable such that this method immediately acquires the wake lock and then |
| * once the Runnable is done the wake lock is released. |
| * |
| * <p>Example: |
| * |
| * <pre> |
| * mHandler.post(mWakeLock.wrap(() -> { |
| * // do things on handler, lock is held while we're waiting for this |
| * // to get scheduled and until the runnable is done executing. |
| * }); |
| * </pre> |
| * |
| * <p>Note: you must make sure that the Runnable eventually gets executed, otherwise you'll |
| * leak the wakelock! |
| * |
| * @hide |
| */ |
| public Runnable wrap(Runnable r) { |
| acquire(); |
| return () -> { |
| try { |
| r.run(); |
| } finally { |
| release(); |
| } |
| }; |
| } |
| } |
| } |