| /* |
| * Copyright (C) 2014 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License |
| */ |
| |
| package android.location; |
| |
| import android.annotation.FloatRange; |
| import android.annotation.IntRange; |
| import android.annotation.TestApi; |
| import android.os.Parcel; |
| import android.os.Parcelable; |
| |
| /** |
| * A class containing a GPS clock timestamp. |
| * |
| * <p>It represents a measurement of the GPS receiver's clock. |
| */ |
| public final class GnssClock implements Parcelable { |
| // The following enumerations must be in sync with the values declared in gps.h |
| |
| private static final int HAS_NO_FLAGS = 0; |
| private static final int HAS_LEAP_SECOND = (1<<0); |
| private static final int HAS_TIME_UNCERTAINTY = (1<<1); |
| private static final int HAS_FULL_BIAS = (1<<2); |
| private static final int HAS_BIAS = (1<<3); |
| private static final int HAS_BIAS_UNCERTAINTY = (1<<4); |
| private static final int HAS_DRIFT = (1<<5); |
| private static final int HAS_DRIFT_UNCERTAINTY = (1<<6); |
| private static final int HAS_ELAPSED_REALTIME_NANOS = (1 << 7); |
| private static final int HAS_ELAPSED_REALTIME_UNCERTAINTY_NANOS = (1 << 8); |
| |
| // End enumerations in sync with gps.h |
| |
| private int mFlags; |
| private int mLeapSecond; |
| private long mTimeNanos; |
| private double mTimeUncertaintyNanos; |
| private long mFullBiasNanos; |
| private double mBiasNanos; |
| private double mBiasUncertaintyNanos; |
| private double mDriftNanosPerSecond; |
| private double mDriftUncertaintyNanosPerSecond; |
| private int mHardwareClockDiscontinuityCount; |
| private long mElapsedRealtimeNanos; |
| private long mElapsedRealtimeUncertaintyNanos; |
| |
| /** |
| * @hide |
| */ |
| @TestApi |
| public GnssClock() { |
| initialize(); |
| } |
| |
| /** |
| * Sets all contents to the values stored in the provided object. |
| * @hide |
| */ |
| @TestApi |
| public void set(GnssClock clock) { |
| mFlags = clock.mFlags; |
| mLeapSecond = clock.mLeapSecond; |
| mTimeNanos = clock.mTimeNanos; |
| mTimeUncertaintyNanos = clock.mTimeUncertaintyNanos; |
| mFullBiasNanos = clock.mFullBiasNanos; |
| mBiasNanos = clock.mBiasNanos; |
| mBiasUncertaintyNanos = clock.mBiasUncertaintyNanos; |
| mDriftNanosPerSecond = clock.mDriftNanosPerSecond; |
| mDriftUncertaintyNanosPerSecond = clock.mDriftUncertaintyNanosPerSecond; |
| mHardwareClockDiscontinuityCount = clock.mHardwareClockDiscontinuityCount; |
| mElapsedRealtimeNanos = clock.mElapsedRealtimeNanos; |
| mElapsedRealtimeUncertaintyNanos = clock.mElapsedRealtimeUncertaintyNanos; |
| } |
| |
| /** |
| * Resets all the contents to its original state. |
| * @hide |
| */ |
| @TestApi |
| public void reset() { |
| initialize(); |
| } |
| |
| /** |
| * Returns {@code true} if {@link #getLeapSecond()} is available, {@code false} otherwise. |
| */ |
| public boolean hasLeapSecond() { |
| return isFlagSet(HAS_LEAP_SECOND); |
| } |
| |
| /** |
| * Gets the leap second associated with the clock's time. |
| * |
| * <p>The sign of the value is defined by the following equation: |
| * <pre> |
| * UtcTimeNanos = TimeNanos - (FullBiasNanos + BiasNanos) - LeapSecond * 1,000,000,000</pre> |
| * |
| * <p>The value is only available if {@link #hasLeapSecond()} is {@code true}. |
| */ |
| public int getLeapSecond() { |
| return mLeapSecond; |
| } |
| |
| /** |
| * Sets the leap second associated with the clock's time. |
| * @hide |
| */ |
| @TestApi |
| public void setLeapSecond(int leapSecond) { |
| setFlag(HAS_LEAP_SECOND); |
| mLeapSecond = leapSecond; |
| } |
| |
| /** |
| * Resets the leap second associated with the clock's time. |
| * @hide |
| */ |
| @TestApi |
| public void resetLeapSecond() { |
| resetFlag(HAS_LEAP_SECOND); |
| mLeapSecond = Integer.MIN_VALUE; |
| } |
| |
| /** |
| * Gets the GNSS receiver internal hardware clock value in nanoseconds. |
| * |
| * <p>This value is expected to be monotonically increasing while the hardware clock remains |
| * powered on. For the case of a hardware clock that is not continuously on, see the |
| * {@link #getHardwareClockDiscontinuityCount} field. The GPS time can be derived by subtracting |
| * the sum of {@link #getFullBiasNanos()} and {@link #getBiasNanos()} (when they are available) |
| * from this value. Sub-nanosecond accuracy can be provided by means of {@link #getBiasNanos()}. |
| * |
| * <p>The error estimate for this value (if applicable) is {@link #getTimeUncertaintyNanos()}. |
| */ |
| public long getTimeNanos() { |
| return mTimeNanos; |
| } |
| |
| /** |
| * Sets the GNSS receiver internal clock in nanoseconds. |
| * @hide |
| */ |
| @TestApi |
| public void setTimeNanos(long timeNanos) { |
| mTimeNanos = timeNanos; |
| } |
| |
| /** |
| * Returns {@code true} if {@link #getTimeUncertaintyNanos()} is available, {@code false} |
| * otherwise. |
| */ |
| public boolean hasTimeUncertaintyNanos() { |
| return isFlagSet(HAS_TIME_UNCERTAINTY); |
| } |
| |
| /** |
| * Gets the clock's time Uncertainty (1-Sigma) in nanoseconds. |
| * |
| * <p>The uncertainty is represented as an absolute (single sided) value. |
| * |
| * <p>The value is only available if {@link #hasTimeUncertaintyNanos()} is {@code true}. |
| * |
| * <p>This value is often effectively zero (it is the reference clock by which all other times |
| * and time uncertainties are measured), and thus this field may often be 0, or not provided. |
| */ |
| @FloatRange(from = 0.0f) |
| public double getTimeUncertaintyNanos() { |
| return mTimeUncertaintyNanos; |
| } |
| |
| /** |
| * Sets the clock's Time Uncertainty (1-Sigma) in nanoseconds. |
| * @hide |
| */ |
| @TestApi |
| public void setTimeUncertaintyNanos(@FloatRange(from = 0.0f) double timeUncertaintyNanos) { |
| setFlag(HAS_TIME_UNCERTAINTY); |
| mTimeUncertaintyNanos = timeUncertaintyNanos; |
| } |
| |
| /** |
| * Resets the clock's Time Uncertainty (1-Sigma) in nanoseconds. |
| * @hide |
| */ |
| @TestApi |
| public void resetTimeUncertaintyNanos() { |
| resetFlag(HAS_TIME_UNCERTAINTY); |
| mTimeUncertaintyNanos = Double.NaN; |
| } |
| |
| /** |
| * Returns {@code true} if {@link #getFullBiasNanos()} is available, {@code false} otherwise. |
| */ |
| public boolean hasFullBiasNanos() { |
| return isFlagSet(HAS_FULL_BIAS); |
| } |
| |
| /** |
| * Gets the difference between hardware clock ({@link #getTimeNanos()}) inside GPS receiver and |
| * the true GPS time since 0000Z, January 6, 1980, in nanoseconds. |
| * |
| * <p>This value is available if the receiver has estimated GPS time. If the computed time is |
| * for a non-GPS constellation, the time offset of that constellation to GPS has to be applied |
| * to fill this value. The value is only available if {@link #hasFullBiasNanos()} is |
| * {@code true}. |
| * |
| * <p>The error estimate for the sum of this field and {@link #getBiasNanos} is |
| * {@link #getBiasUncertaintyNanos()}. |
| * |
| * <p>The sign of the value is defined by the following equation: |
| * |
| * <pre> |
| * local estimate of GPS time = TimeNanos - (FullBiasNanos + BiasNanos)</pre> |
| */ |
| public long getFullBiasNanos() { |
| return mFullBiasNanos; |
| } |
| |
| /** |
| * Sets the full bias in nanoseconds. |
| * @hide |
| */ |
| @TestApi |
| public void setFullBiasNanos(long value) { |
| setFlag(HAS_FULL_BIAS); |
| mFullBiasNanos = value; |
| } |
| |
| /** |
| * Resets the full bias in nanoseconds. |
| * @hide |
| */ |
| @TestApi |
| public void resetFullBiasNanos() { |
| resetFlag(HAS_FULL_BIAS); |
| mFullBiasNanos = Long.MIN_VALUE; |
| } |
| |
| /** |
| * Returns {@code true} if {@link #getBiasNanos()} is available, {@code false} otherwise. |
| */ |
| public boolean hasBiasNanos() { |
| return isFlagSet(HAS_BIAS); |
| } |
| |
| /** |
| * Gets the clock's sub-nanosecond bias. |
| * |
| * <p>See the description of how this field is part of converting from hardware clock time, to |
| * GPS time, in {@link #getFullBiasNanos()}. |
| * |
| * <p>The error estimate for the sum of this field and {@link #getFullBiasNanos} is |
| * {@link #getBiasUncertaintyNanos()}. |
| * |
| * <p>The value is only available if {@link #hasBiasNanos()} is {@code true}. |
| */ |
| public double getBiasNanos() { |
| return mBiasNanos; |
| } |
| |
| /** |
| * Sets the sub-nanosecond bias. |
| * @hide |
| */ |
| @TestApi |
| public void setBiasNanos(double biasNanos) { |
| setFlag(HAS_BIAS); |
| mBiasNanos = biasNanos; |
| } |
| |
| /** |
| * Resets the clock's Bias in nanoseconds. |
| * @hide |
| */ |
| @TestApi |
| public void resetBiasNanos() { |
| resetFlag(HAS_BIAS); |
| mBiasNanos = Double.NaN; |
| } |
| |
| /** |
| * Returns {@code true} if {@link #getBiasUncertaintyNanos()} is available, {@code false} |
| * otherwise. |
| */ |
| public boolean hasBiasUncertaintyNanos() { |
| return isFlagSet(HAS_BIAS_UNCERTAINTY); |
| } |
| |
| /** |
| * Gets the clock's Bias Uncertainty (1-Sigma) in nanoseconds. |
| * |
| * <p>See the description of how this field provides the error estimate in the conversion from |
| * hardware clock time, to GPS time, in {@link #getFullBiasNanos()}. |
| * |
| * <p>The value is only available if {@link #hasBiasUncertaintyNanos()} is {@code true}. |
| */ |
| @FloatRange(from = 0.0f) |
| public double getBiasUncertaintyNanos() { |
| return mBiasUncertaintyNanos; |
| } |
| |
| /** |
| * Sets the clock's Bias Uncertainty (1-Sigma) in nanoseconds. |
| * @hide |
| */ |
| @TestApi |
| public void setBiasUncertaintyNanos(@FloatRange(from = 0.0f) double biasUncertaintyNanos) { |
| setFlag(HAS_BIAS_UNCERTAINTY); |
| mBiasUncertaintyNanos = biasUncertaintyNanos; |
| } |
| |
| /** |
| * Resets the clock's Bias Uncertainty (1-Sigma) in nanoseconds. |
| * @hide |
| */ |
| @TestApi |
| public void resetBiasUncertaintyNanos() { |
| resetFlag(HAS_BIAS_UNCERTAINTY); |
| mBiasUncertaintyNanos = Double.NaN; |
| } |
| |
| /** |
| * Returns {@code true} if {@link #getDriftNanosPerSecond()} is available, {@code false} |
| * otherwise. |
| */ |
| public boolean hasDriftNanosPerSecond() { |
| return isFlagSet(HAS_DRIFT); |
| } |
| |
| /** |
| * Gets the clock's Drift in nanoseconds per second. |
| * |
| * <p>This value is the instantaneous time-derivative of the value provided by |
| * {@link #getBiasNanos()}. |
| * |
| * <p>A positive value indicates that the frequency is higher than the nominal (e.g. GPS master |
| * clock) frequency. The error estimate for this reported drift is |
| * {@link #getDriftUncertaintyNanosPerSecond()}. |
| * |
| * <p>The value is only available if {@link #hasDriftNanosPerSecond()} is {@code true}. |
| */ |
| public double getDriftNanosPerSecond() { |
| return mDriftNanosPerSecond; |
| } |
| |
| /** |
| * Sets the clock's Drift in nanoseconds per second. |
| * @hide |
| */ |
| @TestApi |
| public void setDriftNanosPerSecond(double driftNanosPerSecond) { |
| setFlag(HAS_DRIFT); |
| mDriftNanosPerSecond = driftNanosPerSecond; |
| } |
| |
| /** |
| * Resets the clock's Drift in nanoseconds per second. |
| * @hide |
| */ |
| @TestApi |
| public void resetDriftNanosPerSecond() { |
| resetFlag(HAS_DRIFT); |
| mDriftNanosPerSecond = Double.NaN; |
| } |
| |
| /** |
| * Returns {@code true} if {@link #getDriftUncertaintyNanosPerSecond()} is available, |
| * {@code false} otherwise. |
| */ |
| public boolean hasDriftUncertaintyNanosPerSecond() { |
| return isFlagSet(HAS_DRIFT_UNCERTAINTY); |
| } |
| |
| /** |
| * Gets the clock's Drift Uncertainty (1-Sigma) in nanoseconds per second. |
| * |
| * <p>The value is only available if {@link #hasDriftUncertaintyNanosPerSecond()} is |
| * {@code true}. |
| */ |
| @FloatRange(from = 0.0f) |
| public double getDriftUncertaintyNanosPerSecond() { |
| return mDriftUncertaintyNanosPerSecond; |
| } |
| |
| /** |
| * Sets the clock's Drift Uncertainty (1-Sigma) in nanoseconds per second. |
| * @hide |
| */ |
| @TestApi |
| public void setDriftUncertaintyNanosPerSecond( |
| @FloatRange(from = 0.0f) double driftUncertaintyNanosPerSecond) { |
| setFlag(HAS_DRIFT_UNCERTAINTY); |
| mDriftUncertaintyNanosPerSecond = driftUncertaintyNanosPerSecond; |
| } |
| |
| /** |
| * Resets the clock's Drift Uncertainty (1-Sigma) in nanoseconds per second. |
| * @hide |
| */ |
| @TestApi |
| public void resetDriftUncertaintyNanosPerSecond() { |
| resetFlag(HAS_DRIFT_UNCERTAINTY); |
| mDriftUncertaintyNanosPerSecond = Double.NaN; |
| } |
| |
| /** |
| * Returns {@code true} if {@link #getElapsedRealtimeNanos()} is available, {@code false} |
| * otherwise. |
| */ |
| public boolean hasElapsedRealtimeNanos() { |
| return isFlagSet(HAS_ELAPSED_REALTIME_NANOS); |
| } |
| |
| /** |
| * Returns the elapsed real-time of this clock since system boot, in nanoseconds. |
| * |
| * <p>The value is only available if {@link #hasElapsedRealtimeNanos()} is |
| * {@code true}. |
| */ |
| public long getElapsedRealtimeNanos() { |
| return mElapsedRealtimeNanos; |
| } |
| |
| /** |
| * Sets the elapsed real-time of this clock since system boot, in nanoseconds. |
| * @hide |
| */ |
| @TestApi |
| public void setElapsedRealtimeNanos(long elapsedRealtimeNanos) { |
| setFlag(HAS_ELAPSED_REALTIME_NANOS); |
| mElapsedRealtimeNanos = elapsedRealtimeNanos; |
| } |
| |
| /** |
| * Resets the elapsed real-time of this clock since system boot, in nanoseconds. |
| * @hide |
| */ |
| @TestApi |
| public void resetElapsedRealtimeNanos() { |
| resetFlag(HAS_ELAPSED_REALTIME_NANOS); |
| mElapsedRealtimeNanos = 0; |
| } |
| |
| /** |
| * Returns {@code true} if {@link #getElapsedRealtimeUncertaintyNanos()} is available, {@code |
| * false} otherwise. |
| */ |
| public boolean hasElapsedRealtimeUncertaintyNanos() { |
| return isFlagSet(HAS_ELAPSED_REALTIME_UNCERTAINTY_NANOS); |
| } |
| |
| /** |
| * Gets the estimate of the relative precision of the alignment of the |
| * {@link #getElapsedRealtimeNanos()} timestamp, with the reported measurements in |
| * nanoseconds (68% confidence). |
| * |
| * <p>The value is only available if {@link #hasElapsedRealtimeUncertaintyNanos()} is |
| * {@code true}. |
| */ |
| @IntRange(from = 0) |
| public long getElapsedRealtimeUncertaintyNanos() { |
| return mElapsedRealtimeUncertaintyNanos; |
| } |
| |
| /** |
| * Sets the estimate of the relative precision of the alignment of the |
| * {@link #getElapsedRealtimeNanos()} timestamp, with the reported measurements in |
| * nanoseconds (68% confidence). |
| * @hide |
| */ |
| @TestApi |
| public void setElapsedRealtimeUncertaintyNanos( |
| @IntRange(from = 0) long elapsedRealtimeUncertaintyNanos) { |
| setFlag(HAS_ELAPSED_REALTIME_UNCERTAINTY_NANOS); |
| mElapsedRealtimeUncertaintyNanos = elapsedRealtimeUncertaintyNanos; |
| } |
| |
| /** |
| * Resets the estimate of the relative precision of the alignment of the |
| * {@link #getElapsedRealtimeNanos()} timestamp, with the reported measurements in |
| * nanoseconds (68% confidence). |
| * @hide |
| */ |
| @TestApi |
| public void resetElapsedRealtimeUncertaintyNanos() { |
| resetFlag(HAS_ELAPSED_REALTIME_UNCERTAINTY_NANOS); |
| mElapsedRealtimeUncertaintyNanos = Long.MAX_VALUE; |
| } |
| |
| /** |
| * Gets count of hardware clock discontinuities. |
| * |
| * <p>When this value stays the same, vs. a value in a previously reported {@link GnssClock}, it |
| * can be safely assumed that the {@code TimeNanos} value has been derived from a clock that has |
| * been running continuously - e.g. a single continuously powered crystal oscillator, and thus |
| * the {@code (FullBiasNanos + BiasNanos)} offset can be modelled with traditional clock bias |
| * & drift models. |
| * |
| * <p>Each time this value changes, vs. the value in a previously reported {@link GnssClock}, |
| * that suggests the hardware clock may have experienced a discontinuity (e.g. a power cycle or |
| * other anomaly), so that any assumptions about modelling a smoothly changing |
| * {@code (FullBiasNanos + BiasNanos)} offset, and a smoothly growing {@code (TimeNanos)} |
| * between this and the previously reported {@code GnssClock}, should be reset. |
| */ |
| public int getHardwareClockDiscontinuityCount() { |
| return mHardwareClockDiscontinuityCount; |
| } |
| |
| /** |
| * Sets count of last hardware clock discontinuity. |
| * @hide |
| */ |
| @TestApi |
| public void setHardwareClockDiscontinuityCount(int value) { |
| mHardwareClockDiscontinuityCount = value; |
| } |
| |
| public static final @android.annotation.NonNull Creator<GnssClock> CREATOR = new Creator<GnssClock>() { |
| @Override |
| public GnssClock createFromParcel(Parcel parcel) { |
| GnssClock gpsClock = new GnssClock(); |
| |
| gpsClock.mFlags = parcel.readInt(); |
| gpsClock.mLeapSecond = parcel.readInt(); |
| gpsClock.mTimeNanos = parcel.readLong(); |
| gpsClock.mTimeUncertaintyNanos = parcel.readDouble(); |
| gpsClock.mFullBiasNanos = parcel.readLong(); |
| gpsClock.mBiasNanos = parcel.readDouble(); |
| gpsClock.mBiasUncertaintyNanos = parcel.readDouble(); |
| gpsClock.mDriftNanosPerSecond = parcel.readDouble(); |
| gpsClock.mDriftUncertaintyNanosPerSecond = parcel.readDouble(); |
| gpsClock.mHardwareClockDiscontinuityCount = parcel.readInt(); |
| gpsClock.mElapsedRealtimeNanos = parcel.readLong(); |
| gpsClock.mElapsedRealtimeUncertaintyNanos = parcel.readLong(); |
| |
| return gpsClock; |
| } |
| |
| @Override |
| public GnssClock[] newArray(int size) { |
| return new GnssClock[size]; |
| } |
| }; |
| |
| @Override |
| public void writeToParcel(Parcel parcel, int flags) { |
| parcel.writeInt(mFlags); |
| parcel.writeInt(mLeapSecond); |
| parcel.writeLong(mTimeNanos); |
| parcel.writeDouble(mTimeUncertaintyNanos); |
| parcel.writeLong(mFullBiasNanos); |
| parcel.writeDouble(mBiasNanos); |
| parcel.writeDouble(mBiasUncertaintyNanos); |
| parcel.writeDouble(mDriftNanosPerSecond); |
| parcel.writeDouble(mDriftUncertaintyNanosPerSecond); |
| parcel.writeInt(mHardwareClockDiscontinuityCount); |
| parcel.writeLong(mElapsedRealtimeNanos); |
| parcel.writeLong(mElapsedRealtimeUncertaintyNanos); |
| } |
| |
| @Override |
| public int describeContents() { |
| return 0; |
| } |
| |
| @Override |
| public String toString() { |
| final String format = " %-15s = %s\n"; |
| final String formatWithUncertainty = " %-15s = %-25s %-26s = %s\n"; |
| StringBuilder builder = new StringBuilder("GnssClock:\n"); |
| |
| builder.append(String.format(format, "LeapSecond", hasLeapSecond() ? mLeapSecond : null)); |
| |
| builder.append(String.format( |
| formatWithUncertainty, |
| "TimeNanos", |
| mTimeNanos, |
| "TimeUncertaintyNanos", |
| hasTimeUncertaintyNanos() ? mTimeUncertaintyNanos : null)); |
| |
| builder.append(String.format( |
| format, |
| "FullBiasNanos", |
| hasFullBiasNanos() ? mFullBiasNanos : null)); |
| |
| builder.append(String.format( |
| formatWithUncertainty, |
| "BiasNanos", |
| hasBiasNanos() ? mBiasNanos : null, |
| "BiasUncertaintyNanos", |
| hasBiasUncertaintyNanos() ? mBiasUncertaintyNanos : null)); |
| |
| builder.append(String.format( |
| formatWithUncertainty, |
| "DriftNanosPerSecond", |
| hasDriftNanosPerSecond() ? mDriftNanosPerSecond : null, |
| "DriftUncertaintyNanosPerSecond", |
| hasDriftUncertaintyNanosPerSecond() ? mDriftUncertaintyNanosPerSecond : null)); |
| |
| builder.append(String.format( |
| format, |
| "HardwareClockDiscontinuityCount", |
| mHardwareClockDiscontinuityCount)); |
| |
| builder.append(String.format( |
| format, |
| "ElapsedRealtimeNanos", |
| hasElapsedRealtimeNanos() ? mElapsedRealtimeNanos : null)); |
| |
| builder.append(String.format( |
| format, |
| "ElapsedRealtimeUncertaintyNanos", |
| hasElapsedRealtimeUncertaintyNanos() ? mElapsedRealtimeUncertaintyNanos : null)); |
| |
| return builder.toString(); |
| } |
| |
| private void initialize() { |
| mFlags = HAS_NO_FLAGS; |
| resetLeapSecond(); |
| setTimeNanos(Long.MIN_VALUE); |
| resetTimeUncertaintyNanos(); |
| resetFullBiasNanos(); |
| resetBiasNanos(); |
| resetBiasUncertaintyNanos(); |
| resetDriftNanosPerSecond(); |
| resetDriftUncertaintyNanosPerSecond(); |
| setHardwareClockDiscontinuityCount(Integer.MIN_VALUE); |
| resetElapsedRealtimeNanos(); |
| resetElapsedRealtimeUncertaintyNanos(); |
| } |
| |
| private void setFlag(int flag) { |
| mFlags |= flag; |
| } |
| |
| private void resetFlag(int flag) { |
| mFlags &= ~flag; |
| } |
| |
| private boolean isFlagSet(int flag) { |
| return (mFlags & flag) == flag; |
| } |
| } |